FAQ o OpenWrt | Sprzedam różne routery | Oddam

2022-09-08 11:46:47

Netgear WNDR4300 + laptop z kartą Broadcom BCM43228 802.11a/b/g/n 2.4/5G

Do wersji 19.07 włącznie działało to ok ale od 2x.xx laptop ma duże problemy żeby się połączyć. Przy sieci 5G to już w ogóle robi się ciekawie bo tu potrafi się nawet zawiesić radio w routerze.

Słyszałem o problemach przy starszym sprzęcie i ustawieniu szyfrowania WPA2/WPA3 Mixed ale przestawienie na samo WPA2 nic nie zmieniło.

Cały czas korzystam więc z wersji 19.07 a 2x.xx (w tej chwili najnowsze 22.03 stąd) wrzucam co jakiś czas testowo ale nic tu się nie zmienia.

Tu przykład, po ręcznym rozłączeniu ponowne połączenie następuje dopiero po 3 minutach:

Thu Sep  8 11:56:16 2022 daemon.info hostapd: wlan0: STA 24:fd:52:f5:25:88 IEEE 802.11: disassociated
Thu Sep  8 11:56:17 2022 daemon.info hostapd: wlan0: STA 24:fd:52:f5:25:88 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Thu Sep  8 11:59:12 2022 daemon.info hostapd: wlan0: STA 24:fd:52:f5:25:88 IEEE 802.11: authenticated
Thu Sep  8 11:59:12 2022 daemon.info hostapd: wlan0: STA 24:fd:52:f5:25:88 IEEE 802.11: associated (aid 2)
Thu Sep  8 11:59:12 2022 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 24:fd:52:f5:25:88
Thu Sep  8 11:59:12 2022 daemon.info hostapd: wlan0: STA 24:fd:52:f5:25:88 WPA: pairwise key handshake completed (RSN)
Thu Sep  8 11:59:12 2022 daemon.notice hostapd: wlan0: EAPOL-4WAY-HS-COMPLETED 24:fd:52:f5:25:88

2021-08-26 14:24:42

W RC4 coś jest skopane z mostem, też mam połączenie 2xWNDR4300 - AP WDS z Client WDS i komputer podłączony kablem do clienta nie dostaje adresu z DHCP AP.

Ktoś już to zgłosił: https://bugs.openwrt.org/index.php?do=d … sk_id=3961

Wgrałem RC3 i znowu most śmiga.

2021-05-26 21:26:54

Ja mam most 5GHz między dwoma WNDR4300@OpenWRT 21.02 i w porywach leci prawie 240Mbit/s także to jest kres jego możliwości. Najczęściej oscyluje to w granicach 180-200Mbit.

2021-03-04 20:55:33

5GHz w tym modelu to taka uroda, choć nie przypomina sobie, żeby mi to radio nie wstało a mam 2 szt. w użyciu.

Ja zrobiłem sysupgrade z ostatniego 19.07 od Cezarego, w LuCI to taki komunikat otrzymałem, zaznaczyłem checkboxy jak na screenie i zatwierdziłem.

2021-03-04 20:06:26

Na Netgear WNDR4300 wgranie sysupgrade -F -n skończyło się mrugającą na zielono diodą power, tak jakby router przeszedł w tryb oczekiwania na firmware przez TFTP. Zresetowałem go i ręcznie go w ten tryb wprowadziłem, dla pewności wrzuciłem mu oryginał i jak wstał to dostał obraz factory i działa.

2020-10-05 14:01:54

Prawie rok temu kupiłem do Lenovo z 2013 roku oryginał na aliexpress z tego sklepu: https://pl.aliexpress.com/store/1870289
Zapłaciłem 120 zł, przesyłka nadana z Chin trasą przez Holandię (PostNL), szła 3 tygodnie, żadnych dodatkowych opłat nie poniosłem. Nie mam zastrzeżeń, działa jak trzeba do dziś.

Wcześniej kupiłem zamiennik RDY z alledrogo, który witał komunikatami o nieoryginalnej baterii i jeszcze okazał się wadliwy - padł tego samego dnia. Potem kupiłem oryginał, też z allegro, ale okazał się niekompatybilny z tym modelem laptopa. W obu przypadkach zwróciłem i oddali pieniądze.

2020-05-23 19:11:28

A ja mam takie 2 . Przed chwilą zrobiłem na drugim sysupgrade z zachowaniem ustawień i po restarcie wszystko działa. Po zrobieniu restartu z menu dhcp nie działało, kilka dni temu nie miałem przez chwilę prądu i po tym też nie załapało.

[edit]

Chyba jednak nie do końca działa bo drukarka nie dostawała adresu. Po restarcie interfejsu zaskoczyło

2020-05-23 18:32:30

Niedziałające DHCP. WNDR4300, podpięty tylko komputer po kablu.

Zrobiłem sysupgrade do najnowszej wersji by Cezary z LuCI bez zachowywania ustawień. Router się zresetował, przemielił co musiał i dostałem adres prywatny 169.254.*.*. Zmieniłem na karcie sieciowej adres na 192.168.1.10 i zalogowałem na router. W LuCI zrestartowałem interfejs LAN, DHCP zaskoczyło i po przestawieniu karty na DHCP przydzieliło adres 192.168.1.239. Całość w logu:

Wed May 20 21:06:58 2020 kern.notice kernel: [    0.000000] Linux version 4.14.180 (cezary@eko.one.pl) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10707-75d11f665c)) #0 Wed May 20 19:06:48 2020
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] SoC: Atheros AR9344 rev 2
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] Determined physical RAM map:
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000]  memory: 08000000 @ 00000000 (usable)
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Wed May 20 21:06:58 2020 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Wed May 20 21:06:58 2020 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] Zone ranges:
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] Movable zone start for each node
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] Early memory node ranges
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Wed May 20 21:06:58 2020 kern.debug kernel: [    0.000000] On node 0 totalpages: 32768
Wed May 20 21:06:58 2020 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 80536ba0, node_mem_map 81000020
Wed May 20 21:06:58 2020 kern.debug kernel: [    0.000000]   Normal zone: 256 pages used for memmap
Wed May 20 21:06:58 2020 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Wed May 20 21:06:58 2020 kern.debug kernel: [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
Wed May 20 21:06:58 2020 kern.notice kernel: [    0.000000] random: get_random_bytes called from 0x8053a740 with crng_init=0
Wed May 20 21:06:58 2020 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Wed May 20 21:06:58 2020 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
Wed May 20 21:06:58 2020 kern.notice kernel: [    0.000000] Kernel command line:  board=WNDR4300 console=ttyS0,115200 mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata)ro,512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),121856k(ubi),123904k@0x6c0000(firmware),256k(caldata_backup),-(reserved) rootfstype=squashfs noinitrd
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] Memory: 124100K/131072K available (4256K kernel code, 176K rwdata, 528K rodata, 216K init, 213K bss, 6972K reserved, 0K cma-reserved)
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] NR_IRQS: 51
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] Clocks: CPU:560.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
Wed May 20 21:06:58 2020 kern.info kernel: [    0.000010] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
Wed May 20 21:06:58 2020 kern.info kernel: [    0.008316] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
Wed May 20 21:06:58 2020 kern.info kernel: [    0.084944] pid_max: default: 32768 minimum: 301
Wed May 20 21:06:58 2020 kern.info kernel: [    0.090076] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Wed May 20 21:06:58 2020 kern.info kernel: [    0.097139] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Wed May 20 21:06:58 2020 kern.info kernel: [    0.106947] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Wed May 20 21:06:58 2020 kern.info kernel: [    0.117459] futex hash table entries: 256 (order: -1, 3072 bytes)
Wed May 20 21:06:58 2020 kern.info kernel: [    0.125180] NET: Registered protocol family 16
Wed May 20 21:06:58 2020 kern.info kernel: [    0.131320] MIPS: machine is NETGEAR WNDR4300
Wed May 20 21:06:58 2020 kern.debug kernel: [    0.136176] ar71xx: using random MAC address for eth0
Wed May 20 21:06:58 2020 kern.warn kernel: [    0.374527] registering PCI controller with io_map_base unset
Wed May 20 21:06:58 2020 kern.info kernel: [    0.393730] PCI host bridge to bus 0000:00
Wed May 20 21:06:58 2020 kern.info kernel: [    0.398103] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
Wed May 20 21:06:58 2020 kern.info kernel: [    0.405470] pci_bus 0000:00: root bus resource [io  0x0000]
Wed May 20 21:06:58 2020 kern.info kernel: [    0.411399] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Wed May 20 21:06:58 2020 kern.info kernel: [    0.418637] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Wed May 20 21:06:58 2020 kern.debug kernel: [    0.427096] pci 0000:00:00.0: [168c:0033] type 00 class 0x028000
Wed May 20 21:06:58 2020 kern.err kernel: [    0.427112] pci 0000:00:00.0: invalid calibration data
Wed May 20 21:06:58 2020 kern.debug kernel: [    0.432632] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
Wed May 20 21:06:58 2020 kern.debug kernel: [    0.432689] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Wed May 20 21:06:58 2020 kern.debug kernel: [    0.432771] pci 0000:00:00.0: supports D1
Wed May 20 21:06:58 2020 kern.debug kernel: [    0.432782] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Wed May 20 21:06:58 2020 kern.debug kernel: [    0.432996] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Wed May 20 21:06:58 2020 kern.info kernel: [    0.433025] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
Wed May 20 21:06:58 2020 kern.info kernel: [    0.440826] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
Wed May 20 21:06:58 2020 kern.info kernel: [    0.451994] clocksource: Switched to clocksource MIPS
Wed May 20 21:06:58 2020 kern.info kernel: [    0.458443] NET: Registered protocol family 2
Wed May 20 21:06:58 2020 kern.info kernel: [    0.464064] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Wed May 20 21:06:58 2020 kern.info kernel: [    0.471489] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Wed May 20 21:06:58 2020 kern.info kernel: [    0.478315] TCP: Hash tables configured (established 1024 bind 1024)
Wed May 20 21:06:58 2020 kern.info kernel: [    0.485230] UDP hash table entries: 256 (order: 0, 4096 bytes)
Wed May 20 21:06:58 2020 kern.info kernel: [    0.491462] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Wed May 20 21:06:58 2020 kern.info kernel: [    0.498441] NET: Registered protocol family 1
Wed May 20 21:06:58 2020 kern.debug kernel: [    0.503169] PCI: CLS 0 bytes, default 32
Wed May 20 21:06:58 2020 kern.warn kernel: [    0.506152] Crashlog allocated RAM at address 0x3f00000
Wed May 20 21:06:58 2020 kern.info kernel: [    0.513137] workingset: timestamp_bits=30 max_order=15 bucket_order=0
Wed May 20 21:06:58 2020 kern.info kernel: [    0.525294] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Wed May 20 21:06:58 2020 kern.info kernel: [    0.531497] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Wed May 20 21:06:58 2020 kern.info kernel: [    0.552872] io scheduler noop registered
Wed May 20 21:06:58 2020 kern.info kernel: [    0.557050] io scheduler deadline registered (default)
Wed May 20 21:06:58 2020 kern.info kernel: [    0.563012] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Wed May 20 21:06:58 2020 kern.info kernel: [    0.571918] console [ttyS0] disabled
Wed May 20 21:06:59 2020 kern.info kernel: [    0.595843] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
Wed May 20 21:06:59 2020 kern.info kernel: [    0.605046] console [ttyS0] enabled
Wed May 20 21:06:59 2020 kern.info kernel: [    0.612475] bootconsole [early0] disabled
Wed May 20 21:06:59 2020 kern.info kernel: [    0.628053] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1
Wed May 20 21:06:59 2020 kern.info kernel: [    0.634552] nand: Micron NAND 128MiB 3,3V 8-bit
Wed May 20 21:06:59 2020 kern.info kernel: [    0.639151] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Wed May 20 21:06:59 2020 kern.info kernel: [    0.646882] Scanning device for bad blocks
Wed May 20 21:06:59 2020 kern.notice kernel: [    0.654815] random: fast init done
Wed May 20 21:06:59 2020 kern.warn kernel: [    0.736266] mtd: ar934x-nfc: skipping zero sized partition
Wed May 20 21:06:59 2020 kern.notice kernel: [    0.741838] 11 cmdlinepart partitions found on MTD device ar934x-nfc
Wed May 20 21:06:59 2020 kern.notice kernel: [    0.748310] Creating 11 MTD partitions on "ar934x-nfc":
Wed May 20 21:06:59 2020 kern.notice kernel: [    0.753636] 0x000000000000-0x000000040000 : "u-boot"
Wed May 20 21:06:59 2020 kern.notice kernel: [    0.760066] 0x000000040000-0x000000080000 : "u-boot-env"
Wed May 20 21:06:59 2020 kern.notice kernel: [    0.767555] 0x000000080000-0x0000000c0000 : "caldata"
Wed May 20 21:06:59 2020 kern.notice kernel: [    0.774097] 0x0000000c0000-0x000000140000 : "pot"
Wed May 20 21:06:59 2020 kern.notice kernel: [    0.780909] 0x000000140000-0x000000340000 : "language"
Wed May 20 21:06:59 2020 kern.notice kernel: [    0.787563] 0x000000340000-0x0000003c0000 : "config"
Wed May 20 21:06:59 2020 kern.notice kernel: [    0.794695] 0x0000003c0000-0x0000006c0000 : "traffic_meter"
Wed May 20 21:06:59 2020 kern.notice kernel: [    0.801735] 0x0000006c0000-0x0000008c0000 : "kernel"
Wed May 20 21:06:59 2020 kern.notice kernel: [    0.808857] 0x0000008c0000-0x000007fc0000 : "ubi"
Wed May 20 21:06:59 2020 kern.notice kernel: [    0.815677] 0x0000006c0000-0x000007fc0000 : "firmware"
Wed May 20 21:06:59 2020 kern.notice kernel: [    2.158173] random: crng init done
Wed May 20 21:06:59 2020 kern.notice kernel: [    2.538691] 0x000007fc0000-0x000008000000 : "caldata_backup"
Wed May 20 21:06:59 2020 kern.info kernel: [    2.546910] libphy: Fixed MDIO Bus: probed
Wed May 20 21:06:59 2020 kern.info kernel: [    2.555085] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
Wed May 20 21:06:59 2020 kern.info kernel: [    3.225322] libphy: ag71xx_mdio: probed
Wed May 20 21:06:59 2020 kern.info kernel: [    3.853348] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
Wed May 20 21:06:59 2020 kern.info kernel: [    3.864752] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
Wed May 20 21:06:59 2020 kern.info kernel: [    3.873570] NET: Registered protocol family 10
Wed May 20 21:06:59 2020 kern.info kernel: [    3.883880] Segment Routing with IPv6
Wed May 20 21:06:59 2020 kern.info kernel: [    3.887713] NET: Registered protocol family 17
Wed May 20 21:06:59 2020 kern.info kernel: [    3.892337] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Wed May 20 21:06:59 2020 kern.info kernel: [    3.906074] 8021q: 802.1Q VLAN Support v1.8
Wed May 20 21:06:59 2020 kern.notice kernel: [    3.914159] UBI: auto-attach mtd8
Wed May 20 21:06:59 2020 kern.notice kernel: [    3.917559] ubi0: attaching mtd8
Wed May 20 21:06:59 2020 kern.notice kernel: [    5.410511] ubi0: scanning is finished
Wed May 20 21:06:59 2020 kern.notice kernel: [    5.431861] ubi0: attached mtd8 (name "ubi", size 119 MiB)
Wed May 20 21:06:59 2020 kern.notice kernel: [    5.437493] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Wed May 20 21:06:59 2020 kern.notice kernel: [    5.444489] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Wed May 20 21:06:59 2020 kern.notice kernel: [    5.451376] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Wed May 20 21:06:59 2020 kern.notice kernel: [    5.458452] ubi0: good PEBs: 952, bad PEBs: 0, corrupted PEBs: 0
Wed May 20 21:06:59 2020 kern.notice kernel: [    5.464567] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Wed May 20 21:06:59 2020 kern.notice kernel: [    5.471899] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1135311740
Wed May 20 21:06:59 2020 kern.notice kernel: [    5.481184] ubi0: available PEBs: 0, total reserved PEBs: 952, PEBs reserved for bad PEB handling: 20
Wed May 20 21:06:59 2020 kern.notice kernel: [    5.490605] ubi0: background thread "ubi_bgt0d" started, PID 367
Wed May 20 21:06:59 2020 kern.info kernel: [    5.498300] block ubiblock0_0: created from ubi0:0(rootfs)
Wed May 20 21:06:59 2020 kern.notice kernel: [    5.503934] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
Wed May 20 21:06:59 2020 kern.info kernel: [    5.511002] hctosys: unable to open rtc device (rtc0)
Wed May 20 21:06:59 2020 kern.info kernel: [    5.522369] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Wed May 20 21:06:59 2020 kern.info kernel: [    5.530687] Freeing unused kernel memory: 216K
Wed May 20 21:06:59 2020 kern.warn kernel: [    5.535241] This architecture does not have kernel memory protection.
Wed May 20 21:06:59 2020 user.info kernel: [    6.255085] init: Console is alive
Wed May 20 21:06:59 2020 user.info kernel: [    6.258789] init: - watchdog -
Wed May 20 21:06:59 2020 user.info kernel: [    8.253970] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Wed May 20 21:06:59 2020 kern.info kernel: [    8.407952] usbcore: registered new interface driver usbfs
Wed May 20 21:06:59 2020 kern.info kernel: [    8.413658] usbcore: registered new interface driver hub
Wed May 20 21:06:59 2020 kern.info kernel: [    8.419145] usbcore: registered new device driver usb
Wed May 20 21:06:59 2020 kern.info kernel: [    8.461892] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Wed May 20 21:06:59 2020 kern.notice kernel: [    8.478408] SCSI subsystem initialized
Wed May 20 21:06:59 2020 kern.info kernel: [    8.487711] ehci-platform: EHCI generic platform driver
Wed May 20 21:06:59 2020 kern.info kernel: [    8.493173] ehci-platform ehci-platform: EHCI Host Controller
Wed May 20 21:06:59 2020 kern.info kernel: [    8.499039] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Wed May 20 21:06:59 2020 kern.info kernel: [    8.509189] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Wed May 20 21:06:59 2020 kern.info kernel: [    8.542049] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Wed May 20 21:06:59 2020 kern.info kernel: [    8.549252] hub 1-0:1.0: USB hub found
Wed May 20 21:06:59 2020 kern.info kernel: [    8.553499] hub 1-0:1.0: 1 port detected
Wed May 20 21:06:59 2020 kern.info kernel: [    8.562657] usbcore: registered new interface driver usb-storage
Wed May 20 21:06:59 2020 kern.info kernel: [    8.571728] usbcore: registered new interface driver uas
Wed May 20 21:06:59 2020 user.info kernel: [    8.577791] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Wed May 20 21:06:59 2020 user.info kernel: [    8.595628] init: - preinit -
Wed May 20 21:06:59 2020 kern.info kernel: [    9.396052] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Wed May 20 21:06:59 2020 kern.info kernel: [   10.443271] eth0: link up (1000Mbps/Full duplex)
Wed May 20 21:06:59 2020 kern.info kernel: [   10.448049] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Wed May 20 21:06:59 2020 user.info kernel: [   12.705887] mount_root: loading kmods from internal overlay
Wed May 20 21:06:59 2020 user.info kernel: [   12.772962] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Wed May 20 21:06:59 2020 user.info kernel: [   12.785212] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Wed May 20 21:06:59 2020 kern.err kernel: [   12.926167] print_req_error: I/O error, dev mtdblock0, sector 16
Wed May 20 21:06:59 2020 kern.err kernel: [   13.091217] print_req_error: I/O error, dev mtdblock0, sector 16
Wed May 20 21:06:59 2020 kern.err kernel: [   13.097447] print_req_error: I/O error, dev mtdblock0, sector 16
Wed May 20 21:06:59 2020 kern.err kernel: [   13.103553] Buffer I/O error on dev mtdblock0, logical block 2, async page read
Wed May 20 21:06:59 2020 kern.notice kernel: [   14.066842] UBIFS (ubi0:1): default file-system created
Wed May 20 21:06:59 2020 kern.notice kernel: [   14.073661] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 476
Wed May 20 21:06:59 2020 kern.notice kernel: [   14.274786] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Wed May 20 21:06:59 2020 kern.notice kernel: [   14.282790] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Wed May 20 21:06:59 2020 kern.notice kernel: [   14.292865] UBIFS (ubi0:1): FS size: 110596096 bytes (105 MiB, 871 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
Wed May 20 21:06:59 2020 kern.notice kernel: [   14.303651] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Wed May 20 21:06:59 2020 kern.notice kernel: [   14.310368] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 6DF61C9A-4126-4E85-A526-09EA459E1903, small LPT model
Wed May 20 21:06:59 2020 user.info kernel: [   14.323335] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Wed May 20 21:06:59 2020 user.err kernel: [   14.330599] block: unable to load configuration (fstab: Entry not found)
Wed May 20 21:06:59 2020 user.info kernel: [   14.337567] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
Wed May 20 21:06:59 2020 user.err kernel: [   14.344403] block: unable to load configuration (fstab: Entry not found)
Wed May 20 21:06:59 2020 user.info kernel: [   14.351302] block: attempting to load /etc/config/fstab
Wed May 20 21:06:59 2020 user.err kernel: [   14.358706] block: unable to load configuration (fstab: Entry not found)
Wed May 20 21:06:59 2020 user.err kernel: [   14.365664] block: no usable configuration
Wed May 20 21:06:59 2020 kern.notice kernel: [   14.373040] UBIFS (ubi0:1): un-mount UBI device 0
Wed May 20 21:06:59 2020 kern.notice kernel: [   14.377870] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
Wed May 20 21:06:59 2020 kern.notice kernel: [   14.389489] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 479
Wed May 20 21:06:59 2020 kern.notice kernel: [   14.586916] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Wed May 20 21:06:59 2020 kern.notice kernel: [   14.594916] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Wed May 20 21:06:59 2020 kern.notice kernel: [   14.605007] UBIFS (ubi0:1): FS size: 110596096 bytes (105 MiB, 871 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
Wed May 20 21:06:59 2020 kern.notice kernel: [   14.615790] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Wed May 20 21:06:59 2020 kern.notice kernel: [   14.622524] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 6DF61C9A-4126-4E85-A526-09EA459E1903, small LPT model
Wed May 20 21:06:59 2020 kern.err kernel: [   14.650063] print_req_error: I/O error, dev mtdblock0, sector 16
Wed May 20 21:06:59 2020 kern.err kernel: [   14.691944] print_req_error: I/O error, dev mtdblock0, sector 16
Wed May 20 21:06:59 2020 kern.err kernel: [   14.698193] print_req_error: I/O error, dev mtdblock0, sector 16
Wed May 20 21:06:59 2020 kern.err kernel: [   14.704300] Buffer I/O error on dev mtdblock0, logical block 2, async page read
Wed May 20 21:06:59 2020 user.info kernel: [   15.665260] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Wed May 20 21:06:59 2020 user.err kernel: [   15.672566] block: unable to load configuration (fstab: Entry not found)
Wed May 20 21:06:59 2020 user.info kernel: [   15.679463] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
Wed May 20 21:06:59 2020 user.err kernel: [   15.686353] block: unable to load configuration (fstab: Entry not found)
Wed May 20 21:06:59 2020 user.info kernel: [   15.693319] block: attempting to load /etc/config/fstab
Wed May 20 21:06:59 2020 user.err kernel: [   15.698760] block: unable to load configuration (fstab: Entry not found)
Wed May 20 21:06:59 2020 user.err kernel: [   15.705700] block: no usable configuration
Wed May 20 21:06:59 2020 user.info kernel: [   15.711542] mount_root: overlay filesystem has not been fully initialized yet
Wed May 20 21:06:59 2020 user.info kernel: [   15.719399] mount_root: switching to ubifs overlay
Wed May 20 21:06:59 2020 user.warn kernel: [   15.786073] urandom-seed: Seed file not found (/etc/urandom.seed)
Wed May 20 21:06:59 2020 kern.info kernel: [   15.906524] eth0: link down
Wed May 20 21:06:59 2020 user.info kernel: [   15.921921] procd: - early -
Wed May 20 21:06:59 2020 user.info kernel: [   15.925748] procd: - watchdog -
Wed May 20 21:06:59 2020 user.info kernel: [   16.652192] procd: - watchdog -
Wed May 20 21:06:59 2020 user.info kernel: [   16.655725] procd: - ubus -
Wed May 20 21:06:59 2020 user.info kernel: [   16.977052] procd: - init -
Wed May 20 21:06:59 2020 user.info kernel: [   18.563995] kmodloader: loading kernel modules from /etc/modules.d/*
Wed May 20 21:06:59 2020 kern.info kernel: [   18.734679] tun: Universal TUN/TAP device driver, 1.6
Wed May 20 21:06:59 2020 kern.info kernel: [   18.785203] ip6_tables: (C) 2000-2006 Netfilter Core Team
Wed May 20 21:06:59 2020 kern.info kernel: [   18.825232] Netfilter messages via NETLINK v0.30.
Wed May 20 21:06:59 2020 kern.info kernel: [   18.844991] ip_set: protocol 6
Wed May 20 21:06:59 2020 kern.info kernel: [   18.970241] fuse init (API version 7.26)
Wed May 20 21:06:59 2020 kern.info kernel: [   18.999226] usbcore: registered new interface driver cdc_acm
Wed May 20 21:06:59 2020 kern.info kernel: [   19.005042] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Wed May 20 21:06:59 2020 kern.info kernel: [   19.063779] usbcore: registered new interface driver cdc_wdm
Wed May 20 21:06:59 2020 kern.info kernel: [   19.087245] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
Wed May 20 21:06:59 2020 kern.info kernel: [   19.095069] Backport generated by backports.git v4.19.120-1-0-g60c3a249
Wed May 20 21:06:59 2020 kern.info kernel: [   19.135409] ip_tables: (C) 2000-2006 Netfilter Core Team
Wed May 20 21:06:59 2020 kern.info kernel: [   19.177497] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
Wed May 20 21:06:59 2020 user.info kernel: [   19.341738] urngd: v1.0.2 started.
Wed May 20 21:06:59 2020 kern.info kernel: [   19.689811] usbcore: registered new interface driver usblp
Wed May 20 21:06:59 2020 kern.info kernel: [   19.738386] usbcore: registered new interface driver usbserial
Wed May 20 21:06:59 2020 kern.info kernel: [   19.744472] usbcore: registered new interface driver usbserial_generic
Wed May 20 21:06:59 2020 kern.info kernel: [   19.751175] usbserial: USB Serial support registered for generic
Wed May 20 21:06:59 2020 kern.info kernel: [   19.828422] wireguard: WireGuard 1.0.20200506 loaded. See www.wireguard.com for information.
Wed May 20 21:06:59 2020 kern.info kernel: [   19.837043] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Wed May 20 21:06:59 2020 kern.info kernel: [   19.942064] xt_time: kernel timezone is -0000
Wed May 20 21:06:59 2020 kern.info kernel: [   19.959330] usbcore: registered new interface driver cdc_ether
Wed May 20 21:06:59 2020 kern.info kernel: [   19.996108] usbcore: registered new interface driver cdc_ncm
Wed May 20 21:06:59 2020 kern.info kernel: [   20.123771] usbcore: registered new interface driver huawei_cdc_ncm
Wed May 20 21:06:59 2020 kern.info kernel: [   20.300750] PPP generic driver version 2.4.2
Wed May 20 21:06:59 2020 kern.info kernel: [   20.333529] NET: Registered protocol family 24
Wed May 20 21:06:59 2020 kern.info kernel: [   20.345029] usbcore: registered new interface driver qmi_wwan
Wed May 20 21:06:59 2020 kern.info kernel: [   20.375133] usbcore: registered new interface driver rndis_host
Wed May 20 21:06:59 2020 kern.info kernel: [   20.404830] usbcore: registered new interface driver sierra
Wed May 20 21:06:59 2020 kern.info kernel: [   20.410566] usbserial: USB Serial support registered for Sierra USB modem
Wed May 20 21:06:59 2020 kern.info kernel: [   20.454304] usbcore: registered new interface driver sierra_net
Wed May 20 21:06:59 2020 kern.info kernel: [   20.594622] usbcore: registered new interface driver cdc_mbim
Wed May 20 21:06:59 2020 kern.info kernel: [   20.624285] usbcore: registered new interface driver option
Wed May 20 21:06:59 2020 kern.info kernel: [   20.630023] usbserial: USB Serial support registered for GSM modem (1-port)
Wed May 20 21:06:59 2020 kern.info kernel: [   20.675497] usbcore: registered new interface driver qcserial
Wed May 20 21:06:59 2020 kern.info kernel: [   20.681409] usbserial: USB Serial support registered for Qualcomm USB modem
Wed May 20 21:06:59 2020 kern.warn kernel: [   20.751159] ath9k ar934x_wmac: Direct firmware load for soc_wmac.eeprom failed with error -2
Wed May 20 21:06:59 2020 kern.warn kernel: [   20.759777] ath9k ar934x_wmac: Falling back to user helper
Wed May 20 21:06:59 2020 kern.debug kernel: [   21.758250] ath: EEPROM regdomain: 0x0
Wed May 20 21:06:59 2020 kern.debug kernel: [   21.758259] ath: EEPROM indicates default country code should be used
Wed May 20 21:06:59 2020 kern.debug kernel: [   21.758264] ath: doing EEPROM country->regdmn map search
Wed May 20 21:06:59 2020 kern.debug kernel: [   21.758281] ath: country maps to regdmn code: 0x3a
Wed May 20 21:06:59 2020 kern.debug kernel: [   21.758287] ath: Country alpha2 being used: US
Wed May 20 21:06:59 2020 kern.debug kernel: [   21.758291] ath: Regpair used: 0x3a
Wed May 20 21:06:59 2020 kern.debug kernel: [   21.772563] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Wed May 20 21:06:59 2020 kern.info kernel: [   21.774626] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47
Wed May 20 21:06:59 2020 kern.info kernel: [   21.781535] pci 0000:00:00.0: using irq 40 for pin 1
Wed May 20 21:06:59 2020 kern.warn kernel: [   21.786660] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Wed May 20 21:06:59 2020 kern.warn kernel: [   21.793634] ath9k 0000:00:00.0: Direct firmware load for pci_wmac0.eeprom failed with error -2
Wed May 20 21:06:59 2020 kern.warn kernel: [   21.802430] ath9k 0000:00:00.0: Falling back to user helper
Wed May 20 21:06:59 2020 kern.debug kernel: [   22.792416] ath: EEPROM regdomain: 0x0
Wed May 20 21:06:59 2020 kern.debug kernel: [   22.792426] ath: EEPROM indicates default country code should be used
Wed May 20 21:06:59 2020 kern.debug kernel: [   22.792430] ath: doing EEPROM country->regdmn map search
Wed May 20 21:06:59 2020 kern.debug kernel: [   22.792446] ath: country maps to regdmn code: 0x3a
Wed May 20 21:06:59 2020 kern.debug kernel: [   22.792453] ath: Country alpha2 being used: US
Wed May 20 21:06:59 2020 kern.debug kernel: [   22.792457] ath: Regpair used: 0x3a
Wed May 20 21:06:59 2020 kern.debug kernel: [   22.804676] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Wed May 20 21:06:59 2020 kern.info kernel: [   22.806772] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
Wed May 20 21:06:59 2020 user.info kernel: [   22.842620] kmodloader: done loading kernel modules from /etc/modules.d/*
Wed May 20 21:07:00 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Wed May 20 21:07:00 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Wed May 20 21:07:00 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Wed May 20 21:07:01 2020 daemon.info dnsmasq[1532]: started, version 2.80 cachesize 150
Wed May 20 21:07:01 2020 daemon.info dnsmasq[1532]: DNS service limited to local subnets
Wed May 20 21:07:01 2020 daemon.info dnsmasq[1532]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Wed May 20 21:07:01 2020 daemon.info dnsmasq[1532]: using local addresses only for domain test
Wed May 20 21:07:01 2020 daemon.info dnsmasq[1532]: using local addresses only for domain onion
Wed May 20 21:07:01 2020 daemon.info dnsmasq[1532]: using local addresses only for domain localhost
Wed May 20 21:07:01 2020 daemon.info dnsmasq[1532]: using local addresses only for domain local
Wed May 20 21:07:01 2020 daemon.info dnsmasq[1532]: using local addresses only for domain invalid
Wed May 20 21:07:01 2020 daemon.info dnsmasq[1532]: using local addresses only for domain bind
Wed May 20 21:07:01 2020 daemon.info dnsmasq[1532]: using local addresses only for domain lan
Wed May 20 21:07:01 2020 daemon.warn dnsmasq[1532]: no servers found in /tmp/resolv.conf.auto, will retry
Wed May 20 21:07:01 2020 daemon.info dnsmasq[1532]: read /etc/hosts - 4 addresses
Wed May 20 21:07:01 2020 daemon.info dnsmasq[1532]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Wed May 20 21:07:32 2020 authpriv.info dropbear[1569]: Not backgrounding
Wed May 20 21:07:34 2020 user.notice : Added device handler type: 8021ad
Wed May 20 21:07:34 2020 user.notice : Added device handler type: 8021q
Wed May 20 21:07:34 2020 user.notice : Added device handler type: macvlan
Wed May 20 21:07:34 2020 user.notice : Added device handler type: veth
Wed May 20 21:07:34 2020 user.notice : Added device handler type: bridge
Wed May 20 21:07:34 2020 user.notice : Added device handler type: Network device
Wed May 20 21:07:34 2020 user.notice : Added device handler type: tunnel
Wed May 20 21:07:35 2020 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Wed May 20 21:07:35 2020 daemon.notice procd: /etc/init.d/network: 'radio1' is disabled
Wed May 20 21:07:35 2020 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Wed May 20 21:07:35 2020 daemon.notice procd: /etc/init.d/network: 'radio1' is disabled
Wed May 20 21:07:37 2020 kern.err kernel: [   66.596309] print_req_error: I/O error, dev mtdblock0, sector 16
Wed May 20 21:07:37 2020 kern.err kernel: [   66.677376] print_req_error: I/O error, dev mtdblock0, sector 16
Wed May 20 21:07:37 2020 kern.err kernel: [   66.696365] print_req_error: I/O error, dev mtdblock0, sector 16
Wed May 20 21:07:37 2020 kern.err kernel: [   66.702482] Buffer I/O error on dev mtdblock0, logical block 2, async page read
Wed May 20 21:07:39 2020 daemon.notice procd: /etc/rc.d/S50uhttpd: 4+0 records in
Wed May 20 21:07:39 2020 daemon.notice procd: /etc/rc.d/S50uhttpd: 4+0 records out
Wed May 20 21:07:40 2020 daemon.info dnsmasq[1532]: exiting on receipt of SIGTERM
Wed May 20 21:07:41 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Wed May 20 21:07:41 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Wed May 20 21:07:41 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Wed May 20 21:07:42 2020 daemon.notice procd: /etc/rc.d/S50uhttpd: Generating a RSA private key
Wed May 20 21:07:44 2020 kern.info kernel: [   74.343227] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Wed May 20 21:07:44 2020 kern.info kernel: [   74.372284] device eth0 entered promiscuous mode
Wed May 20 21:07:44 2020 kern.info kernel: [   74.382602] br-lan: port 1(eth0.1) entered blocking state
Wed May 20 21:07:44 2020 kern.info kernel: [   74.388099] br-lan: port 1(eth0.1) entered disabled state
Wed May 20 21:07:44 2020 kern.info kernel: [   74.393979] device eth0.1 entered promiscuous mode
Wed May 20 21:07:44 2020 kern.info kernel: [   74.442363] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Wed May 20 21:07:44 2020 daemon.notice netifd: Interface 'lan' is enabled
Wed May 20 21:07:44 2020 daemon.notice netifd: Interface 'lan' is setting up now
Wed May 20 21:07:44 2020 daemon.notice netifd: Interface 'lan' is now up
Wed May 20 21:07:44 2020 daemon.notice netifd: Interface 'loopback' is enabled
Wed May 20 21:07:44 2020 daemon.notice netifd: Interface 'loopback' is setting up now
Wed May 20 21:07:44 2020 daemon.notice netifd: Interface 'loopback' is now up
Wed May 20 21:07:44 2020 kern.info kernel: [   74.528520] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
Wed May 20 21:07:45 2020 daemon.notice netifd: Interface 'wan' is enabled
Wed May 20 21:07:45 2020 daemon.notice netifd: Interface 'wan6' is enabled
Wed May 20 21:07:45 2020 daemon.notice netifd: Network device 'lo' link is up
Wed May 20 21:07:45 2020 daemon.notice netifd: Interface 'loopback' has link connectivity
Wed May 20 21:07:45 2020 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed May 20 21:07:45 2020 kern.info kernel: [   75.403848] eth0: link up (1000Mbps/Full duplex)
Wed May 20 21:07:45 2020 kern.info kernel: [   75.408617] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Wed May 20 21:07:45 2020 daemon.notice netifd: VLAN 'eth0.1' link is up
Wed May 20 21:07:45 2020 daemon.notice netifd: VLAN 'eth0.2' link is up
Wed May 20 21:07:45 2020 daemon.notice netifd: Interface 'wan' has link connectivity
Wed May 20 21:07:45 2020 daemon.notice netifd: Interface 'wan' is setting up now
Wed May 20 21:07:45 2020 daemon.notice netifd: Interface 'wan6' has link connectivity
Wed May 20 21:07:45 2020 daemon.notice netifd: Interface 'wan6' is setting up now
Wed May 20 21:07:45 2020 daemon.notice netifd: Network device 'eth0' link is up
Wed May 20 21:07:45 2020 kern.info kernel: [   75.472126] br-lan: port 1(eth0.1) entered blocking state
Wed May 20 21:07:45 2020 kern.info kernel: [   75.477620] br-lan: port 1(eth0.1) entered forwarding state
Wed May 20 21:07:45 2020 kern.info kernel: [   75.483665] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
Wed May 20 21:07:46 2020 daemon.err odhcpd[1725]: Failed to send to ff02::1%lan@br-lan (Address not available)
Wed May 20 21:07:46 2020 daemon.notice netifd: bridge 'br-lan' link is up
Wed May 20 21:07:46 2020 daemon.notice netifd: Interface 'lan' has link connectivity
Wed May 20 21:07:46 2020 kern.info kernel: [   75.572112] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Wed May 20 21:07:46 2020 daemon.notice netifd: wan (2050): udhcpc: started, v1.30.1
Wed May 20 21:07:47 2020 daemon.err odhcpd[1725]: Failed to send to ff02::1%lan@br-lan (Address not available)
Wed May 20 21:07:47 2020 daemon.err odhcp6c[2051]: Failed to send RS (Address not available)
Wed May 20 21:07:47 2020 daemon.info dnsmasq[2072]: started, version 2.80 cachesize 150
Wed May 20 21:07:47 2020 daemon.info dnsmasq[2072]: DNS service limited to local subnets
Wed May 20 21:07:47 2020 daemon.info dnsmasq[2072]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Wed May 20 21:07:47 2020 daemon.info dnsmasq[2072]: using local addresses only for domain test
Wed May 20 21:07:47 2020 daemon.info dnsmasq[2072]: using local addresses only for domain onion
Wed May 20 21:07:47 2020 daemon.info dnsmasq[2072]: using local addresses only for domain localhost
Wed May 20 21:07:47 2020 daemon.info dnsmasq[2072]: using local addresses only for domain local
Wed May 20 21:07:47 2020 daemon.info dnsmasq[2072]: using local addresses only for domain invalid
Wed May 20 21:07:47 2020 daemon.info dnsmasq[2072]: using local addresses only for domain bind
Wed May 20 21:07:47 2020 daemon.info dnsmasq[2072]: using local addresses only for domain lan
Wed May 20 21:07:47 2020 daemon.warn dnsmasq[2072]: no servers found in /tmp/resolv.conf.auto, will retry
Wed May 20 21:07:47 2020 daemon.info dnsmasq[2072]: read /etc/hosts - 4 addresses
Wed May 20 21:07:47 2020 daemon.info dnsmasq[2072]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Wed May 20 21:07:47 2020 daemon.notice netifd: wan (2050): udhcpc: sending discover
Wed May 20 21:07:49 2020 daemon.notice procd: /etc/rc.d/S50uhttpd: ...................................+++++
Wed May 20 21:07:50 2020 daemon.notice procd: /etc/rc.d/S50uhttpd: ......+++++
Wed May 20 21:07:50 2020 daemon.notice procd: /etc/rc.d/S50uhttpd: writing new private key to '/etc/uhttpd.key.new'
Wed May 20 21:07:50 2020 daemon.notice procd: /etc/rc.d/S50uhttpd: -----
Wed May 20 21:07:50 2020 daemon.notice netifd: wan (2050): udhcpc: sending discover
Wed May 20 21:07:51 2020 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Wed May 20 21:07:51 2020 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Wed May 20 21:07:51 2020 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Wed May 20 21:07:51 2020 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Wed May 20 21:07:51 2020 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Wed May 20 21:07:51 2020 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Wed May 20 21:07:51 2020 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Wed May 20 21:07:52 2020 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Wed May 20 21:07:52 2020 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Wed May 20 21:07:52 2020 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Wed May 20 21:07:52 2020 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Wed May 20 21:07:53 2020 daemon.notice netifd: wan (2050): udhcpc: sending discover
Wed May 20 21:07:53 2020 user.notice vpnbypass [2324]: service monitoring interfaces:  ✓
Wed May 20 21:07:54 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led WAN (green)
Wed May 20 21:07:54 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led WAN (amber)
Wed May 20 21:07:54 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led USB
Wed May 20 21:07:54 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led WLAN2G
Wed May 20 21:07:54 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led WLAN5G
Wed May 20 21:07:54 2020 daemon.notice ksmbd: Starting Ksmbd userspace service.
Wed May 20 21:07:56 2020 daemon.info urandom_seed[2496]: Seed saved (/etc/urandom.seed)
Wed May 20 21:07:56 2020 daemon.info procd: - init complete -
Wed May 20 21:07:56 2020 user.info wsdd2[2557]: starting.
Wed May 20 21:07:56 2020 user.err wsdd2[2557]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Wed May 20 21:09:55 2020 user.info adblock-4.0.4[1694]: adblock is currently disabled, please set the config option 'adb_enabled' to '1' to use this service
Wed May 20 21:11:15 2020 daemon.err uhttpd[2170]: luci: accepted login on / for root from 192.168.1.10
Wed May 20 21:13:09 2020 daemon.notice netifd: Interface 'lan' is now down
Wed May 20 21:13:09 2020 kern.info kernel: [  399.206405] br-lan: port 1(eth0.1) entered disabled state
Wed May 20 21:13:09 2020 kern.info kernel: [  399.296066] device eth0.1 left promiscuous mode
Wed May 20 21:13:09 2020 kern.info kernel: [  399.300868] br-lan: port 1(eth0.1) entered disabled state
Wed May 20 21:13:09 2020 kern.info kernel: [  399.317990] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
Wed May 20 21:13:09 2020 daemon.notice netifd: Interface 'lan' is disabled
Wed May 20 21:13:09 2020 daemon.err odhcpd[1725]: setsockopt(IPV6_ADD_MEMBERSHIP): No such device
Wed May 20 21:13:09 2020 daemon.err odhcpd[1725]: setsockopt(SO_BINDTODEVICE): No such device
Wed May 20 21:13:09 2020 daemon.notice netifd: VLAN 'eth0.1' link is down
Wed May 20 21:13:09 2020 daemon.notice netifd: bridge 'br-lan' link is down
Wed May 20 21:13:09 2020 daemon.notice netifd: Interface 'lan' has link connectivity loss
Wed May 20 21:13:09 2020 kern.info kernel: [  399.402653] br-lan: port 1(eth0.1) entered blocking state
Wed May 20 21:13:09 2020 kern.info kernel: [  399.408150] br-lan: port 1(eth0.1) entered disabled state
Wed May 20 21:13:09 2020 kern.info kernel: [  399.414036] device eth0.1 entered promiscuous mode
Wed May 20 21:13:09 2020 kern.info kernel: [  399.456475] br-lan: port 1(eth0.1) entered blocking state
Wed May 20 21:13:09 2020 kern.info kernel: [  399.461973] br-lan: port 1(eth0.1) entered forwarding state
Wed May 20 21:13:09 2020 daemon.notice netifd: Interface 'lan' is enabled
Wed May 20 21:13:09 2020 daemon.notice netifd: Interface 'lan' is setting up now
Wed May 20 21:13:09 2020 daemon.notice netifd: Interface 'lan' is now up
Wed May 20 21:13:09 2020 daemon.notice netifd: bridge 'br-lan' link is up
Wed May 20 21:13:09 2020 daemon.notice netifd: Interface 'lan' has link connectivity
Wed May 20 21:13:10 2020 daemon.notice netifd: VLAN 'eth0.1' link is up
Wed May 20 21:13:10 2020 daemon.info dnsmasq[2072]: read /etc/hosts - 4 addresses
Wed May 20 21:13:10 2020 daemon.info dnsmasq[2072]: read /tmp/hosts/odhcpd - 0 addresses
Wed May 20 21:13:10 2020 daemon.info dnsmasq[2072]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Wed May 20 21:13:11 2020 daemon.err odhcpd[1725]: Failed to send to ff02::1%lan@br-lan (Address not available)
Wed May 20 21:13:11 2020 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed May 20 21:13:12 2020 daemon.info ksmbd: triggering kill_server
Wed May 20 21:13:12 2020 kern.err kernel: [  402.412835] ksmbd: kill_server_store:480: kill command received
Wed May 20 21:13:12 2020 daemon.notice ksmbd: Starting Ksmbd userspace service.
Wed May 20 21:13:17 2020 daemon.info dnsmasq[2072]: exiting on receipt of SIGTERM
Wed May 20 21:13:17 2020 daemon.info dnsmasq[3366]: started, version 2.80 cachesize 150
Wed May 20 21:13:17 2020 daemon.info dnsmasq[3366]: DNS service limited to local subnets
Wed May 20 21:13:17 2020 daemon.info dnsmasq[3366]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Wed May 20 21:13:17 2020 daemon.info dnsmasq-dhcp[3366]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Wed May 20 21:13:17 2020 daemon.info dnsmasq[3366]: using local addresses only for domain test
Wed May 20 21:13:17 2020 daemon.info dnsmasq[3366]: using local addresses only for domain onion
Wed May 20 21:13:17 2020 daemon.info dnsmasq[3366]: using local addresses only for domain localhost
Wed May 20 21:13:17 2020 daemon.info dnsmasq[3366]: using local addresses only for domain local
Wed May 20 21:13:17 2020 daemon.info dnsmasq[3366]: using local addresses only for domain invalid
Wed May 20 21:13:17 2020 daemon.info dnsmasq[3366]: using local addresses only for domain bind
Wed May 20 21:13:17 2020 daemon.info dnsmasq[3366]: using local addresses only for domain lan
Wed May 20 21:13:17 2020 daemon.warn dnsmasq[3366]: no servers found in /tmp/resolv.conf.auto, will retry
Wed May 20 21:13:17 2020 daemon.info dnsmasq[3366]: read /etc/hosts - 4 addresses
Wed May 20 21:13:17 2020 daemon.info dnsmasq[3366]: read /tmp/hosts/odhcpd - 0 addresses
Wed May 20 21:13:17 2020 daemon.info dnsmasq[3366]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Wed May 20 21:13:17 2020 daemon.info dnsmasq-dhcp[3366]: read /etc/ethers - 0 addresses
Wed May 20 21:13:17 2020 daemon.info dnsmasq[3366]: read /etc/hosts - 4 addresses
Wed May 20 21:13:17 2020 daemon.info dnsmasq[3366]: read /tmp/hosts/odhcpd - 0 addresses
Wed May 20 21:13:17 2020 daemon.info dnsmasq[3366]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Wed May 20 21:13:17 2020 daemon.info dnsmasq-dhcp[3366]: read /etc/ethers - 0 addresses
Wed May 20 21:13:33 2020 daemon.info dnsmasq-dhcp[3366]: DHCPDISCOVER(br-lan) 94:de:80:00:f0:eb
Wed May 20 21:13:33 2020 daemon.info dnsmasq-dhcp[3366]: DHCPOFFER(br-lan) 192.168.1.239 94:de:80:00:f0:eb
Wed May 20 21:13:33 2020 daemon.info dnsmasq-dhcp[3366]: DHCPREQUEST(br-lan) 192.168.1.239 94:de:80:00:f0:eb
Wed May 20 21:13:33 2020 daemon.info dnsmasq-dhcp[3366]: DHCPACK(br-lan) 192.168.1.239 94:de:80:00:f0:eb KICEK

2020-05-10 21:49:03

Potwierdzam ten problem z dhcp, na WNDR4300 przywróciłem ustawienia fabryczne kilka dni temu i trzeba było ręcznie ustawiać adres na komputerze żeby się dostać na router. Prawdopodobnie pomaga restart samego interfejsu lan.

2018-11-13 10:51:19

Wystarczy zmienić adres ręcznie w pliku /etc/config/network

2018-09-22 14:07:11

Mam 2 szt. tych Netgearów od wtorku i jestem bardzo zadowolony. Wgrane 18.06 z LuCi od Cezarego (ale wcześniej wrzuciłem najnowszy oryginał), 5GHz bez problemów, zrobiłem między nimi most bezprzewodowy na tej częstotliwości - transfer w porywach 220 Mbit/s. Zasilacze Enertronix EXA0606EB 12V 2A.

2018-07-11 21:44:53

W tej chwili mam 2x TL-WR841Nv7 (jeden jako AP (WDS), drugi jako Client (WDS) po wifi, oba na jakiejś świeżej kompilacji 18.06 z LuCi specjalnie pod ten model). Mieszkam w kamienicy, sieci od cholery i 2.4GHz kuleje coraz bardziej. Od jakiegoś czasu szukam taniej alternatywy na 5GHz najlepiej z gigabitem i wsparciem dla OpenWRT. Teraz zauważyłem na alledrogo, że ktoś sprzedaje sporą ilość używek NETGEAR WNDR4300 i myślę czy warto, bo sprzęt też już dość wiekowy... Nie będzie problemu z mostem na 5GHz z OpenWRT?

2014-07-06 11:54:17

Przecież tam nie ma obrazu dla 1043... Tutaj masz: gargoyle-1.6.1.4-ar71xx-tl-wr1043nd-v1-squashfs-sysupgrade.bin

2014-06-22 11:15:36

W liście zmian 1.6.1.4 jak byk napisane:

ZMIANA: dla routerów z 4MB flash i USB została usunięta funkcja repeatera

2014-05-21 11:40:17

[OT]

remolmar napisał/a:

Zakupiłem w MM 4300.

Jeżeli nie było promocji to sporo przepłaciłeś
[/OT]

2014-03-29 14:43:58

@Jarni

Próbowałeś sprawdzić jak to będzie funkcjonować na oryginalnym sofcie? Jam mam 2 szt. 841N i po różnych testach zostawiłem na AP Gargoyle (tryb AP+WDS) a na moście mam oryginalny soft w trybie WDS. Mi chodziło akurat o prędkość po kablu, kiedy na moście miałem Gargoyle to bez różnicy czy po kablu czy wifi miałem ~25Mbit. Jak wrzuciłem na niego oryginalny soft to wifi pozostało bez większych zmian ale za to po kablu jest w porywach ponad 60 Mbit.

2014-03-18 18:18:28

Tu masz org bez boot: http://ecco.selfip.net/orig/tl-wdr4300v1/

2014-03-18 12:41:41

Previous versions, but only "factory":

ftp://ftp.tplink-forum.pl/Gargoyle/

2014-03-11 23:06:33

Podłączę się. Czy taka jest realna prędkość jest w trybie mostu/przekaźnika? Dziś zawitał do mnie dla testu identyczny, jak już przeze mnie posiadany, WR841N v7.2. Na obu Gargoyle 1.6.0.1. I po konfiguracji jest ściana na prędkości 20Mbit (+/- 2Mbit), czasami wolniej. Bez różnicy, czy podepnę się do przekaźnika po kablu czy wifi. Jakość sygnału pomiędzy nimi jest dobra, AP pokazuje w tej chwili takie dane:
Przepływność Jakość sygnału
240.0 Mbit/s -57 dBm

Przy samym AP miewam w porywach 40-50Mbit ale jakość sygnału niższa (-70/75 dBm, dość często przy chwilowym dużym obciążeniu potrafi się połączenie "zerwać").

2014-03-11 16:02:43

zigi napisał/a:

Jeśli nie wyłączasz routera to cały czas jest ten sam ip.

Może jakbyś na kilka dni wyłączył modem to by się zmieniło IP. Z moich obserwacji wynika że UPC zmienia IP co kilka miesięcy.

Jak ma się zwykły modem, to zmianę IP można wymusić zmieniając adres MAC na porcie WAN swojego routera. Po tej operacji trzeba jeszcze wyłączyć na chwilę modem.

W przypadku modemo-routerów (EPC3925, TC7200) nie ma możliwości wymuszenia zmiany IP.

2014-01-11 11:41:33

Cezary napisał/a:

Miałeś coś poprzednio zainstalowanego czego nie ma teraz i wpis menu został.

Eh, po przeczytaniu powyższego zdania przypomniało mi się, że przecież miałem "Otoczenie WiFi", zainstalowałem ten dodatek i już OK

2014-01-11 11:33:03

Dzisiejszy 1.5.11.7, WR841N v7, żadnych dodatków poza motywami. Aktualizacja z zachowaniem ustawień z 1.5.11.6.

2014-01-11 11:26:15

Witam

Po aktualizacji w motywach innych niż standardowy (sprawdziłem na trzech) pojawiła się pusta pozycja w menu System:

FAQ o OpenWrt | Sprzedam różne routery | Oddam

Opcje wyszukiwania

Znalezione posty: 23

1 Odpowiedź przez kicek 2022-09-08 11:46:47

Odp: Zmiany w wydaniu OpenWrt 22.03 (201 odpowiedzi, napisanych Oprogramowanie / Software)

2 Odpowiedź przez kicek 2021-08-26 14:24:42

Odp: Wireless VLAN trunk OpenWrt 21.02.0-rc4 / TP-Link TL-WA801ND v5 (3 odpowiedzi, napisanych Oprogramowanie / Software)

3 Odpowiedź przez kicek 2021-05-26 21:26:54

Odp: Netgear WNDR4300 wifi bridge transfery (18 odpowiedzi, napisanych Oprogramowanie / Software)

4 Odpowiedź przez kicek 2021-03-04 20:55:33

Odp: Zmiany w wydaniu OpenWrt 21.02 (515 odpowiedzi, napisanych Oprogramowanie / Software)

5 Odpowiedź przez kicek 2021-03-04 20:06:26

Odp: Zmiany w wydaniu OpenWrt 21.02 (515 odpowiedzi, napisanych Oprogramowanie / Software)

6 Odpowiedź przez kicek 2020-10-05 14:01:54

Odp: Bateria zamiennik do laptopa (6 odpowiedzi, napisanych Inne)

7 Odpowiedź przez kicek 2020-05-23 19:11:28

Odp: Zmiany w wydaniu OpenWrt 19.07 (1,299 odpowiedzi, napisanych Oprogramowanie / Software)

8 Odpowiedź przez kicek 2020-05-23 18:32:30

Odp: Zmiany w wydaniu OpenWrt 19.07 (1,299 odpowiedzi, napisanych Oprogramowanie / Software)

9 Odpowiedź przez kicek 2020-05-10 21:49:03

Odp: Zmiany w wydaniu OpenWrt 19.07 (1,299 odpowiedzi, napisanych Oprogramowanie / Software)

10 Odpowiedź przez kicek 2018-11-13 10:51:19

Odp: Openwrt 18.06 i działanie Lucyny (8 odpowiedzi, napisanych Oprogramowanie / Software)

11 Odpowiedź przez kicek 2018-09-22 14:07:11

Odp: Co kupić do OpenWrt? Poradnik kupującego (4,557 odpowiedzi, napisanych Oprogramowanie / Software)

12 Temat przez kicek 2018-07-11 21:44:53

Temat: TL-WR841N -> WNDR4300 (1 odpowiedzi, napisanych Sprzęt / Hardware)

13 Odpowiedź przez kicek 2014-07-06 11:54:17

Odp: TP-LINK TL-WR1043ND zmiana firmware'u (63 odpowiedzi, napisanych Oprogramowanie / Software)

14 Odpowiedź przez kicek 2014-06-22 11:15:36

Odp: [mr3420v1] Most bezprzewodowy / Przekaźnik (11 odpowiedzi, napisanych Oprogramowanie / Software)

15 Odpowiedź przez kicek 2014-05-21 11:40:17

Odp: 1043 vs 4300 - zasięg (9 odpowiedzi, napisanych Oprogramowanie / Software)

16 Odpowiedź przez kicek 2014-03-29 14:43:58

Odp: Wolna prędkość internetu na routerze w trybie bridge. (18 odpowiedzi, napisanych Oprogramowanie / Software)

17 Odpowiedź przez kicek 2014-03-18 18:18:28

Odp: Wymiana WR842ND na TL-WDR4300 (15 odpowiedzi, napisanych Oprogramowanie / Software)

18 Odpowiedź przez kicek 2014-03-18 12:41:41

Odp: Gargoyle 1.6.0.2 Firmware (2 odpowiedzi, napisanych Oprogramowanie / Software)

19 Odpowiedź przez kicek 2014-03-11 23:06:33

Odp: Wolna prędkość internetu na routerze w trybie bridge. (18 odpowiedzi, napisanych Oprogramowanie / Software)

20 Odpowiedź przez kicek 2014-03-11 16:02:43

Odp: UPC i OpenWRT (163 odpowiedzi, napisanych Oprogramowanie / Software)

21 Odpowiedź przez kicek 2014-01-11 11:41:33

Odp: Statystyki wykorzystania routerów (586 odpowiedzi, napisanych Oprogramowanie / Software)

22 Odpowiedź przez kicek 2014-01-11 11:33:03

Odp: Statystyki wykorzystania routerów (586 odpowiedzi, napisanych Oprogramowanie / Software)

23 Odpowiedź przez kicek 2014-01-11 11:26:15

Odp: Statystyki wykorzystania routerów (586 odpowiedzi, napisanych Oprogramowanie / Software)

Znalezione posty: 23