[    0.422060] printk: console [ttyS0] enabled
[    0.422060] printk: console [ttyS0] enabled
[    0.431123] printk: bootconsole [early0] disabled
[    0.431123] printk: bootconsole [early0] disabled
[    0.511160] spi-nand spi0.1: GigaDevice SPI NAND was found.
[    0.516937] spi-nand spi0.1: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
[    0.537690] 6 fixed-partitions partitions found on MTD device (null)
[    0.544363] OF: Bad cell count for /ahb/spi@1f000000/flash@1/partitions
[    0.551249] OF: Bad cell count for /ahb/spi@1f000000/flash@1/partitions
[    0.558611] OF: Bad cell count for /ahb/spi@1f000000/flash@1/partitions
[    0.565487] OF: Bad cell count for /ahb/spi@1f000000/flash@1/partitions
[    0.572855] Creating 6 MTD partitions on "(null)":
[    0.577826] 0x000000000000-0x0000000a0000 : "fota-flag"
[    0.587607] 0x0000000a0000-0x000000120000 : "art"
[    0.595006] 0x000000120000-0x0000001a0000 : "mac"
[    0.602488] 0x0000001a0000-0x000001800000 : "ubiconcat0"
[    0.639546] 0x000001800000-0x000001c00000 : "kernel"
[    0.651871] 0x000001c00000-0x000008000000 : "ubiconcat1"
[    0.799001] spi-nor spi0.0: gd25q16 (2048 Kbytes)
[    0.803928] 3 fixed-partitions partitions found on MTD device spi0.0
[    0.810544] Creating 3 MTD partitions on "spi0.0":
[    0.815534] 0x000000000000-0x0000000a0000 : "u-boot"
[    0.822510] 0x0000000a0000-0x0000000c0000 : "u-boot-env"
[    0.829066] 0x0000000c0000-0x000000200000 : "reserved1"
[    0.838462] Concatenating MTD devices:
[    0.842418] (0): "ubiconcat0"
[    0.845486] (1): "ubiconcat1"
[    0.848551] into device "ubi-concat"
[    0.852286] 1 fixed-partitions partitions found on MTD device ubi-concat
[    0.859221] Creating 1 MTD partitions on "ubi-concat":
[    0.864534] 0x000000000000-0x000007a60000 : "ubi"
[    1.581277] switch0: Atheros AR8337 rev. 2 switch registered on mdio.0
[    2.240220] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
[    2.251589] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: sgmii
[    2.260913] NET: Registered PF_INET6 protocol family
[    2.276336] Segment Routing with IPv6
[    2.280262] In-situ OAM (IOAM) with IPv6
[    2.284428] NET: Registered PF_PACKET protocol family
[    2.289790] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    2.303509] 8021q: 802.1Q VLAN Support v1.8
[    2.312361] PCI host bridge to bus 0000:00
[    2.316609] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[    2.323765] pci_bus 0000:00: root bus resource [io  0x0000]
[    2.329537] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    2.337763] pci 0000:00:00.0: [168c:0056] type 00 class 0x028000
[    2.344016] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    2.351173] pci 0000:00:00.0: PME# supported from D0 D3hot
[    2.358146] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    2.365058] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[    2.379056] UBI: auto-attach mtd9
[    2.382518] ubi0: attaching mtd9
[    4.261960] ubi0: scanning is finished
[    4.266083] ubi0 error: 0x8047c860: the layout volume was not found
[    4.272798] ubi0 error: 0x804803bc: failed to attach mtd9, error -22
[    4.279492] UBI error: cannot attach mtd9
[    4.354435] Freeing unused kernel image (initmem) memory: 12948K
[    4.360690] This architecture does not have kernel memory protection.
[    4.367351] Run /init as init process
[    4.835667] init: Console is alive
[    4.839766] init: - watchdog -
[    4.862365] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.875424] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.893916] init: - preinit -
[    5.192411] random: jshn: uninitialized urandom read (4 bytes read)
[    5.276960] random: jshn: uninitialized urandom read (4 bytes read)
[    5.391871] random: jshn: uninitialized urandom read (4 bytes read)
[    6.584876] random: procd: uninitialized urandom read (4 bytes read)
[    6.599419] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 5 is up
[    6.607165] eth0: link up (1000Mbps/Full duplex)
[    6.618358] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.631479] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    8.799852] eth0: link down
[    8.822116] procd: - early -
[    8.825410] procd: - watchdog -
[    9.455398] procd: - watchdog -
[    9.459037] procd: - ubus -
[    9.470626] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.512892] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.520007] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.530160] procd: - init -
Please press Enter to activate this console.
[   10.197079] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.762839] PPP generic driver version 2.4.2
[   10.779464] NET: Registered PF_PPPOX protocol family
[   10.806012] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.527349] urngd: v1.0.2 started.
[   12.114316] random: jshn: uninitialized urandom read (4 bytes read)
[   12.365449] random: jshn: uninitialized urandom read (4 bytes read)
[   12.674787] random: jshn: uninitialized urandom read (4 bytes read)
[   13.128945] random: crng init done
[   13.132482] random: 30 urandom warning(s) missed due to ratelimiting



BusyBox v1.36.1 (2023-06-16 12:41:05 UTC) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------------------------------
 |                                                                           |
 | OpenWrt 23.05-SNAPSHOT, r23404-56827dac01                                 |
 |                                                                           |
 | Build time: 2023-09-04 12:49 CEST                                         |
 | Cezary Jackiewicz, https://eko.one.pl                                     |
 |                                                                           |
 -----------------------------------------------------------------------------
 | Machine: ZTE MF286R                                                       |
 | Uptime: 0d, 00:00:47                                                      |
 | Load: 0.70 0.19 0.06                                                      |
 | Flash:                                                                    |
 | Memory: total: 118.6MB, free: 107.0MB, used: 9%                           |
 | Leases: 0                                                                 |
[   51.072790] eth0: link up (1000Mbps/Full duplex)
[   51.077600] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   51.101846] br-lan: port 1(eth0.1) entered blocking state
[   51.107452] br-lan: port 1(eth0.1) entered disabled state
[   51.113353] device eth0.1 entered promiscuous mode
[   51.118319] device eth0 entered promiscuous mode
[   51.144064] br-lan: port 1(eth0.1) entered blocking state
[   51.149705] br-lan: port 1(eth0.1) entered forwarding state
 | lan: static, 192.168.1.1                                                  |
 -----------------------------------------------------------------------------
 === WARNING! ================================================================
 There is no root password defined on this device!
 Use the "passwd" command to set up a new password
 in order to prevent unauthorized SSH logins.
 -----------------------------------------------------------------------------
root@OpenWrt:/# [   52.098909] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready

root@OpenWrt:/# sysupgrade -n /tmp/openwrt-22.03.5-ath79-nand-zte_mf286r-squashf
s-sysupgrade.bin
Fri Sep  1 15:20:37 CEST 2023 upgrade: Commencing upgrade. Closing all shell sessions.
Watchdog handover: fd=3
- watchdog -
Watchdog did not previously reset the system
Fri Sep  1 15:20:37 CEST 2023 upgrade: Sending TERM to remaining processes ...
Fri Sep  1 15:20:42 CEST 2023 upgrade: Sending KILL to remaining processes ...
[  207.743672] stage2 (2029): drop_caches: 3
Fri Sep  1 15:20:48 CEST 2023 upgrade: Switching to ramdisk...
Fri Sep  1 13:20:50 UTC 2023 upgrade: Performing system upgrade...
verifying sysupgrade tar file integrity
Unlocking kernel ...

Writing from <stdin> to kernel ...
[  211.707662] ubi0: attaching mtd9
[  213.593036] ubi0: scanning is finished
[  213.597152] ubi0 error: 0x8047c860: the layout volume was not found
[  213.603879] ubi0 error: 0x804803bc: failed to attach mtd9, error -22
ubiattach: error!: cannot attach mtd9
           error 22 (Invalid argument)
ubiformat: mtd9 (nand), size 128319488 bytes (122.3 MiB), 979 eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes
[  218.655739] ubi0: attaching mtd96 -- 94 % cote
ubiformat: formatting erasebloc[  221.368095] ubi0: scanning is finished
[  221.405522] ubi0: attached mtd9 (name "ubi", size 122 MiB)
[  221.411254] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[  221.418352] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[  221.425379] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[  221.432582] ubi0: good PEBs: 977, bad PEBs: 2, corrupted PEBs: 0
[  221.438791] ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128
[  221.446244] ubi0: max/mean erase counter: 0/0, WL threshold: 4096, image sequence number: 703555130
[  221.455590] ubi0: available PEBs: 955, total reserved PEBs: 22, PEBs reserved for bad PEB handling: 18
[  221.465243] ubi0: background thread "ubi_bgt0d" started, PID 2728
UBI device number 0, total 977 LEBs (124055552 bytes, 118.3 MiB), available 955 LEBs (121262080 bytes, 115.6 MiB), LEB size 126976 bytes (124.0 KiB)
Volume ID 0, size 36 LEBs (4571136 bytes, 4.3 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs", alignment 1
Set volume size to 116690944
Volume ID 1, size 919 LEBs (116690944 bytes, 111.2 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs_data", alignment 1
Unlocking kernel ...

Writing from <stdin> to kernel ...
sysupgrade successful
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource busy
[  227.647262] reboot: Restarting system
�*֕�˝���k��K�K��KA��·V°j�*֕�˝�L�k��K�X���)�C!�A������Ţ��f��U��KA��¸����
                                                �i���&�0�C!jVղW�ݠ�t�.2�ɠ�+��J���
                                                                                �i���I��э!*֕�˝���ѥ.2�:��X"�t���:����ɰC!U�e�W�1&�f+���K��.��(J��:��,j                                                       a�"���,V�� �Q�        ��Z�VJE���5���+�h�����S(       ��I���Nš��O����Nš��E����n填�NY� �݀ŤI����Ů"զ���ekŲ��ծW���KA��·V°j��+��j���*��
                               ѡ_�+�_Y��_Z+�iX+�e鲍�N����
                                                         ѤnV͠Z2�a��      j�ikA��р���5
                                                                                    a��uա�U٥ו٩W+ѩO�������A�&� ��+}��[ו��B�T��Tꁣ�k�������Y�D����k��j��+ZE��!�%ȡ+��%է��Ŵݭ��5
                                           ��r����lZ+� .V�hY*��Zky���a�K}��ج5�թ�5մ�S���A��K�٧��a0�=��a7٤
gY��i���/V      ꂰa0����e����% ,�kꂐI��0C�j�ѩ�0�L����� ����b����m�e�����!����/� Ҕ�ʘ�t�.ꂀ&)��H� �b�Ť
                                                                                                    �Ѳ��i������C!��Q����W���6�ՠ�ɂ���N�ʹi�.�H�$�Ʌn�VV���W���b�n�A�X��d��������0J����
                                                   �$:��ik��K�mYk�zY�� ,�   ʓ���j
                                                                                 ��EŲW�݀MV٥r��!H[��  ��00��00��Li��x v�rsi�� 5��0.��6 ��ui��er��uil�hos�� (��ps��pe��rt��inu�-mu��-g�� (��en��t ��C 1�.2.��r2��34��f1��25��e)��1.2�0, ��U �� (��U ��nu��ls)�2.3�� #��Th��Ap��27��0:2�:15��02��
��  ��0.0�000�� C��0 ��vi��on��s: �001��50��MI�� 7��c)��[ �� 0��000�0] ��PS��ma��in��is��TE �F28��
[�   ��00��00��So�� Q��lc��m A�her�� Q��95�� v�� 1��ev �
�  ��0.0�000�� I��tr��no��fo��d o� em��y ��di��bl��g ��it��
���  ��.0��00�� Pr�mar��da�� c��he��2k�� 4-�ay,��IP�� c��he��li��es��lin�siz��32��yt��
[��  ��00��00]�Zon��ra��es��
                            [  � 0.��00��] ��No��al�� [m�m 0�000��00��00��00��0x��000�000��ff��f]��[ �� 0��000�0] ��va��e ��ne����  ��0.��00��] E�rly��em��y ��de��an��s
��   ��.0��00�� I��tm�� se�up ��de�� [��m ��00��000�000�000��0x��00��00��ff��ff]�
                                                                                 �  ��0.��00��] B�ilt�� z��el��ts��mo��lit� gr��pi�� o��  ��ta��pag�s: ��48��
�[ �� 0��00��0]��en��y ��che�has��ta��e ��tr��s:��638� (o��er��4,��55�� b��es,�lin��r)����  ��.0��00�� In�de-��ch��ha�� t��le��ntr�es:��19��(o��er��3,��276� by��s,��in��r)��[��  0�000�00]��ri��ng��rr��l ��gis�er=��00��00��[ �� 0��000�0] ��ad��ck��rr��l ��gis�er=��00��00���  ��0.0�000�� m�� a��o-��it��sta�k:o��, ��ap��ll��:o��, h�ap ��ee��ff���  ��0.��000�] M��or�� 1��50��/1��072� av��la��e ��38�� k��nel�cod�, 6��K ��da��, ��8K��oda�a, ��44��in��, ��4K��ss,�105��K ��se��ed��0K��ma-�ese��ed��
                                                                                                               [�   ��00��00��SL��: ��ali�n=3�� O��er��-3��Mi��bje�ts=�� C��s=�� N��es��
�  ��0.0�000�] N��IR��: ��
��  ��.0��00�� C�� cl�ck:��75��00��Hz��[ �  0��00��0]��lo��so��ce��MIP�: m��k:��xf��ff��f ��x_c�cle�� 0��ff��ff�� m��_id�e_n�� 4�[ �� 0��08��5]��al��rat�ng �ela��lo��..��38��84��ogo�IPS��lp��19��21�� 2�s, ��ap��ev��y ��41��311�ns
[��  ��07��17]�pid��ax��de��ul�� 3��68��ini�um:��01��[ �  0��79��7]��ou��-c��he �ash��ab�� e��ri��: ��24 �ord��: �� 4��6 ��te�� l��ear�
[  ��0.��75��] ��un��oin�-ca��e ��sh��ab�� e��rie�: 1��4 ��rd��: �� 4��6 ��tes� li��ar��
                                                                                        ��  ��.0��67�� dy�dbg��Ig��re��mp�� _��e�[��  ��10��51��cl��kso�rce��ji��ie�� m��k:��xff�fff�� m��_c��le�� 0��fff�fff��ma��id��_n�� 1��126�446�750��0 ��
[�   ��11��64��fu��x ��sh �abl��en��ie�� 2�� (��der� -1��30�� b��es��li��ar��
                                                                             ��  ��.1��03�� p��ctr� co��: ��it��li��d ��nct�l s��sy��em��[  � 0.��55��] ��T:��eg��ter�d p��to��l ��mi�� 1��
��   �0.2��45�� I��id��ts��as��tab�e e��ri��: ��48��or��r: �, 1��84��yt��, ��ne��)�ys:�Reg��te��d ��er��l ��ve��or �ste��wi��'
[��  ��21��44��tcp�lis��n_��rt��dr��as��has� ta��e ��tr��s:��12��ord�r: �� 4��6 ��te�� l��ear�
�  ��0.��67��] ��P e�tab��sh�� h��h ��bl��ent�ies��10�� (��de�� 0��409� by��s,��in��r)��[ �� 0��34��7] �CP ��nd��as��ta��e ��tri�s: ��24��or��r:��, ��96 �yte�� l��ea��
[  ��0.��23��] ��P:��ash�tab��s ��nf��ur�� (��tab�ish�� 1��4 ��nd��02��
��  ��.2��14�� UD� ha�� t��le��nt��es��256�(or��r:��, ��96��yt��, l�nea��
[ �� 0��56��9]��DP��it��has� ta��e ��tr��s:��56��ord�r: �� 4��6 ��te�� l��ear�
[��  ��26��27]�NET��Re��st��ed��ro��co��fam�ly ��
                                                 �   �0.2��34�� P��: ��S ��byt�s, ��fa��t ��
��  ��0.��86��] ��ua��fs:�ver��on��.0��20��/0��31)�Phi��ip��ou��er���   �0.2��81�� j��s2��ve��io��2.2�(NA��) ��UM��RY��(L��A) �RTI��) ��MO��_P��OR��Y) �c) ��01��00��Re��Ha�� In�.
�  ��0.3�682�� B��ck��ay�� S��I g�ner�� (��g)��ri��r ��rsi�n 0�4 l��de��(m��or��52��
                                                                                    �   �0.3��11�� p��ct��-s��gle�180��02��pi��ux��54��pi��, s�ze ��
[  � 0.��42��] ��ri��: ��50/�655��dr��er��16��or��, ��Q s�ari�� e��bl��
[��  ��33��55��pr��tk:�con��le��tt��0]��is��le��
                                                �  ��0.3�761�� 1��20��0.��rt��tty�0 a��MM�� 0��80��00��(ir� = �� b��e_��ud�� 1��25��) i� a ��55��
[    0.346763] printk: console [ttyS0] enabled
[    0.346763] printk: console [ttyS0] enabled
[    0.355825] printk: bootconsole [early0] disabled
[    0.355825] printk: bootconsole [early0] disabled
[    0.382289] spi-nand spi0.1: GigaDevice SPI NAND was found.
[    0.388058] spi-nand spi0.1: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
[    0.398870] 6 fixed-partitions partitions found on MTD device (null)
[    0.405529] OF: Bad cell count for /ahb/spi@1f000000/flash@1/partitions
[    0.412413] OF: Bad cell count for /ahb/spi@1f000000/flash@1/partitions
[    0.419955] OF: Bad cell count for /ahb/spi@1f000000/flash@1/partitions
[    0.426851] OF: Bad cell count for /ahb/spi@1f000000/flash@1/partitions
[    0.434427] Creating 6 MTD partitions on "(null)":
[    0.439394] 0x000000000000-0x0000000a0000 : "fota-flag"
[    0.448926] 0x0000000a0000-0x000000120000 : "art"
[    0.456241] 0x000000120000-0x0000001a0000 : "mac"
[    0.463616] 0x0000001a0000-0x000001800000 : "ubiconcat0"
[    0.500420] 0x000001800000-0x000001c00000 : "kernel"
[    0.512636] 0x000001c00000-0x000008000000 : "ubiconcat1"
[    0.659491] spi-nor spi0.0: gd25q16 (2048 Kbytes)
[    0.664448] 3 fixed-partitions partitions found on MTD device spi0.0
[    0.671010] Creating 3 MTD partitions on "spi0.0":
[    0.675990] 0x000000000000-0x0000000a0000 : "u-boot"
[    0.682885] 0x0000000a0000-0x0000000c0000 : "u-boot-env"
[    0.689305] 0x0000000c0000-0x000000200000 : "reserved1"
[    0.698384] Concatenating MTD devices:
[    0.702333] (0): "ubiconcat0"
[    0.705394] (1): "ubiconcat1"
[    0.708448] into device "ubi-concat"
[    0.712181] 1 fixed-partitions partitions found on MTD device ubi-concat
[    0.719097] Creating 1 MTD partitions on "ubi-concat":
[    0.724426] 0x000000000000-0x000007a60000 : "ubi"
[    1.425861] switch0: Atheros AR8337 rev. 2 switch registered on mdio.0
[    2.083347] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
[    2.094624] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: sgmii
[    2.103332] NET: Registered protocol family 10
[    2.115475] Segment Routing with IPv6
[    2.119375] NET: Registered protocol family 17
[    2.124105] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    2.137497] 8021q: 802.1Q VLAN Support v1.8
[    2.145765] PCI host bridge /ahb/pcie-controller@18250000 ranges:
[    2.152141]  MEM 0x0000000012000000..0x0000000013ffffff
[    2.157540]   IO 0x0000000000000000..0x0000000000000000
[    2.163103] PCI host bridge to bus 0000:00
[    2.167347] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[    2.174477] pci_bus 0000:00: root bus resource [io  0x0000]
[    2.180232] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    2.187253] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    2.195502] pci 0000:00:00.0: [168c:0056] type 00 class 0x028000
[    2.201735] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    2.208885] pci 0000:00:00.0: PME# supported from D0 D3hot
[    2.215810] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    2.222713] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[    2.235212] UBI: auto-attach mtd9
[    2.238663] ubi0: attaching mtd9
[    4.931315] ubi0: scanning is finished
[    4.969188] ubi0: attached mtd9 (name "ubi", size 122 MiB)
[    4.974919] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.982034] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    4.989039] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.996234] ubi0: good PEBs: 977, bad PEBs: 2, corrupted PEBs: 0
[    5.002442] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    5.009900] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 703555130
[    5.019244] ubi0: available PEBs: 0, total reserved PEBs: 977, PEBs reserved for bad PEB handling: 18
[    5.028865] ubi0: background thread "ubi_bgt0d" started, PID 348
[    5.037947] block ubiblock0_0: created from ubi0:0(rootfs)
[    5.043674] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    5.073801] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    5.088020] Freeing unused kernel memory: 1244K
[    5.092722] This architecture does not have kernel memory protection.
[    5.099383] Run /sbin/init as init process
[    5.903190] init: Console is alive
[    5.907129] init: - watchdog -
[    7.518890] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    7.657988] usbcore: registered new interface driver usbfs
[    7.663791] usbcore: registered new interface driver hub
[    7.669352] usbcore: registered new device driver usb
[    7.684196] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.693657] fsl-ehci: Freescale EHCI Host controller driver
[    7.700948] ehci-platform: EHCI generic platform driver
[    7.706742] ehci-platform 1b000000.usb: EHCI Host Controller
[    7.712669] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
[    7.720882] ehci-platform 1b000000.usb: irq 13, io mem 0x1b000000
[    7.751875] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
[    7.759083] hub 1-0:1.0: USB hub found
[    7.763747] hub 1-0:1.0: 1 port detected
[    7.768595] ehci-platform 1b400000.usb: EHCI Host Controller
[    7.774517] ehci-platform 1b400000.usb: new USB bus registered, assigned bus number 2
[    7.782766] ehci-platform 1b400000.usb: irq 14, io mem 0x1b400000
[    7.811873] ehci-platform 1b400000.usb: USB 2.0 started, EHCI 1.00
[    7.819055] hub 2-0:1.0: USB hub found
[    7.823737] hub 2-0:1.0: 1 port detected
[    7.831120] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    7.849073] init: - preinit -
[    8.762669] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    8.980260] random: procd: uninitialized urandom read (4 bytes read)
[    9.249695] random: jshn: uninitialized urandom read (4 bytes read)
[    9.331417] random: jshn: uninitialized urandom read (4 bytes read)
[   10.794931] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 5 is up
[   10.802659] eth0: link up (1000Mbps/Full duplex)
[   10.819493] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   10.835298] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   15.200045] UBIFS (ubi0:1): default file-system created
[   15.208304] UBIFS (ubi0:1): Mounting in unauthenticated mode
[   15.222635] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 494
[   15.494611] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   15.502744] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   15.512994] UBIFS (ubi0:1): FS size: 115294208 bytes (109 MiB, 908 LEBs), journal size 5713920 bytes (5 MiB, 45 LEBs)
[   15.523947] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[   15.530779] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 38CBE00E-3F0A-415B-93CF-8139C28EB25D, small LPT model
[   15.547889] mount_root: overlay filesystem has not been fully initialized yet
[   15.556340] mount_root: switching to ubifs overlay
[   15.581810] urandom-seed: Seed file not found (/etc/urandom.seed)
[   15.720201] eth0: link down
[   15.741628] procd: - early -
[   15.746163] procd: - watchdog -
[   16.586391] procd: - watchdog -
[   16.754213] procd: - ubus -
[   17.172039] random: ubusd: uninitialized urandom read (4 bytes read)
[   17.181166] random: ubusd: uninitialized urandom read (4 bytes read)
[   17.202407] random: ubusd: uninitialized urandom read (4 bytes read)
[   17.239269] procd: - init -
Please press Enter to activate this console.
[   18.627459] random: jshn: uninitialized urandom read (4 bytes read)
[   18.684576] random: ubusd: uninitialized urandom read (4 bytes read)
[   18.691513] random: ubus: uninitialized urandom read (4 bytes read)
[   19.298374] kmodloader: loading kernel modules from /etc/modules.d/*
[   19.770248] urngd: v1.0.2 started.
[   19.822731] cdc_acm 1-1:1.2: ttyACM0: USB ACM device
[   19.842252] usbcore: registered new interface driver cdc_acm
[   19.848129] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   19.892396] usbcore: registered new interface driver cdc_wdm
[   19.906894] Loading modules backported from Linux version v5.15.92-0-ge515b9902f5f
[   19.914781] Backport generated by backports.git v5.15.92-1-0-gdfe0f60c
[   20.009181] usbcore: registered new interface driver usbserial_generic
[   20.016070] usbserial: USB Serial support registered for generic
[   20.065546] cdc_ether 1-1:1.6 usb0: register 'cdc_ether' at usb-1b000000.usb-1, ZTE CDC Ethernet Device, 42:6c:b5:0d:bf:13
[   20.077205] usbcore: registered new interface driver cdc_ether
[   20.121719] usbcore: registered new interface driver cdc_ncm
[   20.147145] random: crng init done
[   20.150669] random: 28 urandom warning(s) missed due to ratelimiting
[   20.213085] usbcore: registered new interface driver huawei_cdc_ncm
[   20.435229] PPP generic driver version 2.4.2
[   20.442964] NET: Registered protocol family 24
[   20.468765] rndis_host 1-1:1.0 usb1: register 'rndis_host' at usb-1b000000.usb-1, ZTE RNDIS device, 62:aa:c7:13:6d:10
[   20.480002] usbcore: registered new interface driver rndis_host
[   20.609281] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x56.
[   20.619058] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002)
[   20.625878] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[   23.317997] ath10k_pci 0000:00:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
[   23.327566] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   23.346755] ath10k_pci 0000:00:00.0: firmware ver 10.4b-ct-9888-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 59e741e7
[   23.688242] ath10k_pci 0000:00:00.0: Loading BDF type 0
[   23.695597] ath10k_pci 0000:00:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=31 from ath10k/QCA9888/hw2.0/board-2.bin
[   24.132816] ath10k_pci 0000:00:00.0: failed to fetch board-2.bin or board.bin from ath10k/QCA9888/hw2.0
[   24.142577] ath10k_pci 0000:00:00.0: failed to fetch board file: -12
[   24.172059] ath10k_pci 0000:00:00.0: could not probe fw (-12)
[   24.234107] usbcore: registered new interface driver option
[   24.239944] usbserial: USB Serial support registered for GSM modem (1-port)
[   24.302444] Data bus error, epc == 8033539c, ra == 820a2cf4
[   24.308209] Oops[#1]:
[   24.310557] CPU: 0 PID: 742 Comm: kmodloader Not tainted 5.10.176 #0
[   24.317109] $ 0   : 00000000 00000001 deadc0de 00014000
[   24.322511] $ 4   : b81143fc 000143fc 82001c14 00000004
[   24.327914] $ 8   : 00000000 8039ae7c ffffffff ffffffff
[   24.333317] $12   : ffffffff 00000020 00000000 ffffffff
[   24.338720] $16   : 81f54080 00000018 81bafb44 81bafb48
[   24.344122] $20   : 81baff43 80000003 00010000 00014000
[   24.349525] $24   : 00000000 8045d890
[   24.354929] $28   : 81bae000 81bafad0 00031018 820a2cf4
[   24.360332] Hi    : 00004b5c
[   24.363298] Lo    : 4e910000
[   24.366268] epc   : 8033539c 0x8033539c
[   24.370239] ra    : 820a2cf4 0x820a2cf4 [ath9k_hw@bee3bff4+0x54ec0]
[   24.376701] Status: 1100dc03 KERNEL EXL IE
[   24.381030] Cause : 4080801c (ExcCode 07)
[   24.385170] PrId  : 00019750 (MIPS 74Kc)
[   24.389218] Modules linked in: ath9k(+) ath9k_common pppoe ppp_async option nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet ath9k_hw ath10k_pci ath10k_core ath usb_wwan rndis_host pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mac80211 huawei_cdc_ncm cfg80211 cdc_ncm cdc_ether usbserial usbnet slhc nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_ipv6 nf_log_ipv4 nf_log_common nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c hwmon crc_ccitt compat cdc_wdm cdc_acm sha256_generic libsha256 seqiv jitterentropy_rng drbg hmac cmac fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug phy_ar7100_usb usbcore nls_base usb_common mii crc32c_generic
[   24.471835] Process kmodloader (pid: 742, threadinfo=8015015b, task=f837bf19, tls=77ea2df0)
[   24.480449] Stack : 00000005 00000003 00000dc0 00000000 81bafaec 00000000 00000220 000003ff
[   24.489087]         81dc9000 00008000 81f54080 81f540a8 820a0000 81bafbb4 820d0000 820a3e14
[   24.497723]         00000000 81f54080 00020000 00007000 ffffffe0 81f545b8 81f540a8 820d1f50
[   24.506361]         80c98e4c 00000000 80c02d00 00000cc0 000186a0 ffffffff 81f54080 820d0558
[   24.514999]         99999999 00008000 00000100 81f540a8 00000000 81bafbb4 820d0000 82095348
[   24.523636]         ...
[   24.526163] Call Trace:
[   24.526221] [<820a0000>] 0x820a0000 [ath9k_hw@bee3bff4+0x54ec0]
[   24.534862] [<820a3e14>] 0x820a3e14 [ath9k_hw@bee3bff4+0x54ec0]
[   24.541012] [<82095348>] 0x82095348 [ath9k_hw@bee3bff4+0x54ec0]
[   24.547151] [<82086cd4>] 0x82086cd4 [ath9k_hw@bee3bff4+0x54ec0]
[   24.553284] [<80416d68>] 0x80416d68
[   24.556915] [<800a0000>] 0x800a0000
[   24.560535] [<82002864>] 0x82002864 [ath9k@35998916+0x192b0]
[   24.566381] [<82004948>] 0x82004948 [ath9k@35998916+0x192b0]
[   24.572220] [<800c44e4>] 0x800c44e4
[   24.575850] [<82010090>] 0x82010090 [ath9k@35998916+0x192b0]
[   24.581700] [<8023f8a0>] 0x8023f8a0
[   24.585309] [<8039fdc0>] 0x8039fdc0
[   24.588917] [<80241f80>] 0x80241f80
[   24.592526] [<80414d9c>] 0x80414d9c
[   24.596127] [<804129d8>] 0x804129d8
[   24.599737] [<80413508>] 0x80413508
[   24.603346] [<804150d8>] 0x804150d8
[   24.606956] [<80384bb8>] 0x80384bb8
[   24.610551] [<80413518>] 0x80413518
[   24.614152] [<80413594>] 0x80413594
[   24.617763] [<80413518>] 0x80413518
[   24.621365] [<80410564>] 0x80410564
[   24.624986] [<80411c7c>] 0x80411c7c
[   24.628606] [<800ebd40>] 0x800ebd40
[   24.632208] [<80413d78>] 0x80413d78
[   24.635812] [<8201f000>] 0x8201f000 [ath9k@35998916+0x192b0]
[   24.641654] [<8201f018>] 0x8201f018 [ath9k@35998916+0x192b0]
[   24.647493] [<80060970>] 0x80060970
[   24.651096] [<800ea170>] 0x800ea170
[   24.654697] [<801a4164>] 0x801a4164
[   24.658319] [<800ea190>] 0x800ea190
[   24.661920] [<800ec150>] 0x800ec150
[   24.665532] [<8006e1ac>] 0x8006e1ac
[   24.669142]
[   24.670679] Code: 0000000f  8c820000  0000000f <03e00008> 00000000  0000000f  94820000  3042ffff  0000000f
[   24.680759]
[   24.682352] ---[ end trace 25185cd94d5bed13 ]---
[   24.687114] Kernel panic - not syncing: Fatal exception
[   24.692511] Rebooting in 1 seconds..