Jakby ktoś jeszcze walczył z tym sprzętem. Właśnie udało mi się zainstalować najnowsze Openwrt i działa (Wifi 10Mbps).
Wersja maksymalnie okrojona - sprzęt może działać jako Access Point i switch. Nie ma GUI, iptables itp. Moze oczywiscie wejsc przez ssh na router i wszystko sobie pokonfigurowac. Ale za to na kernelu 4.14 :-)
Wgrywanie jak na wiki od DIR-300 z tym ze:
Na serwer tftp wrzucilem:
ls -al /var/lib/tftpboot/
total 2888
drwxr-xr-x 2 root nogroup 4096 Aug 30 12:43 .
drwxr-xr-x 81 root root 4096 Aug 30 11:51 ..
-rwxr-xr-x 1 root root 1245184 Aug 30 12:42 openwrt-ath25-generic-kernel.lzma
-rw-r--r-- 1 root root 1703936 Aug 30 12:43 openwrt-ath25-generic-squashfs-rootfs.bin
później na konsoli przez telnet:
== Executing boot script in 4.990 seconds - enter ^C to abort
^C
DD-WRT>
DD-WRT> fis init
About to initialize [format] FLASH image system - continue (y/n)? y
*** Initialize FLASH Image System
... Erase from 0xbffe0000-0xbfff0000: .
... Program from 0x80ff0000-0x81000000 at 0xbffe0000: .
DD-WRT> ip_address -h 192.168.1.1
IP: 192.168.1.10/255.255.255.0, Gateway: 192.168.1.1
Default server: 192.168.1.1
DD-WRT> load -r -b %{FREEMEMLO} openwrt-ath25-generic-kernel.lzma
Using default protocol (TFTP)
Raw file loaded 0x80040800-0x801707ff, assumed entry at 0x80040800
DD-WRT> fis create -e 0x80041000 -r 0x80041000 vmlinux.bin.l7
... Erase from 0xbfc30000-0xbfd60000: ...................
... Program from 0x80040800-0x80170800 at 0xbfc30000: ...................
... Erase from 0xbffe0000-0xbfff0000: .
... Program from 0x80ff0000-0x81000000 at 0xbffe0000: .
DD-WRT>
DD-WRT> load -r -b %{FREEMEMLO} openwrt-ath25-generic-squashfs-rootfs.bin
Using default protocol (TFTP)
Raw file loaded 0x80040800-0x801e07ff, assumed entry at 0x80040800
DD-WRT> fis create rootfs
... Erase from 0xbfd60000-0xbff00000: ..........................
... Program from 0x80040800-0x801e0800 at 0xbfd60000: ..........................
... Erase from 0xbffe0000-0xbfff0000: .
... Program from 0x80ff0000-0x81000000 at 0xbffe0000: .
DD-WRT>
DD-WRT> reset
No i wstało:
root@OpenWrt:/# dmesg
[ 0.000000] Linux version 4.14.67 (kofec@E5420Mint) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7981-a6e11ccb13)) #0 Wed Aug 29 19:00:58 2018
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019064 (MIPS 4KEc)
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 01000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] On node 0 totalpages: 4096
[ 0.000000] free_area_init_node: node 0, pgdat 8039ed20, node_mem_map 80403020
[ 0.000000] Normal zone: 32 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 4096 pages, LIFO batch:0
[ 0.000000] random: get_random_bytes called from 0x803a2724 with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping off. Total pages: 4064
[ 0.000000] Kernel command line: console=ttyS0,9600 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 64 (order: -4, 256 bytes)
[ 0.000000] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Memory: 12076K/16384K available (2952K kernel code, 137K rwdata, 364K rodata, 184K init, 198K bss, 4308K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 128
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 20774570075 ns
[ 0.000044] sched_clock: 32 bits at 92MHz, resolution 10ns, wraps every 23342213114ns
[ 0.093925] Calibrating delay loop... 183.70 BogoMIPS (lpj=918528)
[ 0.247254] pid_max: default: 32768 minimum: 301
[ 0.303331] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.381815] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.478520] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.595452] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.670236] NET: Registered protocol family 16
[ 0.725362] Can't analyze schedule() prologue at 8031ebb8
[ 0.874847] clocksource: Switched to clocksource MIPS
[ 0.941291] NET: Registered protocol family 2
[ 0.996916] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 1.079706] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 1.155501] TCP: Hash tables configured (established 1024 bind 1024)
[ 1.232162] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 1.301397] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 1.377303] NET: Registered protocol family 1
[ 1.429005] PCI: CLS 0 bytes, default 16
[ 1.459740] Radio config found at offset 0xf8 (0x1f8)
[ 1.549079] Crashlog allocated RAM at address 0xf00000
[ 1.630362] workingset: timestamp_bits=30 max_order=12 bucket_order=0
[ 1.739465] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.808609] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 1.992085] io scheduler noop registered
[ 2.038321] io scheduler deadline registered (default)
[ 2.100486] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 2.196960] serial8250: ttyS0 at MMIO 0x11100000 (irq = 9, base_baud = 5750000) is a 16550A
[ 2.296346] console [ttyS0] enabled
[ 2.379633] bootconsole [early0] disabled
[ 2.480695] ar2315-spiflash ar2315-spiflash.0: 4096 Kbytes flash detected
[ 2.575388] Searching for RedBoot partition table in spiflash at offset 0x3d0000
[ 3.039138] Searching for RedBoot partition table in spiflash at offset 0x3e0000
[ 3.502859] 6 RedBoot partitions found on MTD device spiflash
[ 3.572014] Creating 6 MTD partitions on "spiflash":
[ 3.631853] 0x000000000000-0x000000030000 : "RedBoot"
[ 3.704474] 0x000000030000-0x000000160000 : "vmlinux.bin.l7"
[ 3.784163] 0x000000160000-0x0000003e0000 : "rootfs"
[ 3.849281] mtd: device 2 (rootfs) set to be root filesystem
[ 3.917851] 1 squashfs-split partitions found on MTD device rootfs
[ 3.992372] 0x0000002d0000-0x0000003e0000 : "rootfs_data"
[ 4.074338] 0x0000003e0000-0x0000003ef000 : "FIS directory"
[ 4.152968] 0x0000003ef000-0x0000003f0000 : "RedBoot config"
[ 4.232712] 0x0000003f0000-0x000000400000 : "boardconfig"
[ 4.376558] eth0: Atheros AR231x: 00:1e:58:85:6f:8e, irq 4
[ 4.519858] IP17xx: Found IP175C at 0:00
[ 4.688305] libphy: ar231x_eth_mii: probed
[ 4.906966] eth0: attached PHY driver [IC+ IP17xx] (mii_bus:phy_addr=0:00)
[ 4.996733] NET: Registered protocol family 17
[ 5.050827] 8021q: 802.1Q VLAN Support v1.8
[ 5.158519] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 5.245421] Freeing unused kernel memory: 184K
[ 5.298969] This architecture does not have kernel memory protection.
[ 5.694951] random: fast init done
[ 8.640944] init: Console is alive
[ 8.683616] init: - watchdog -
[ 11.214585] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 11.470643] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 11.569761] init: - preinit -
[ 15.415089] eth0: link up (100Mbps/full duplex)
[ 17.957847] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 18.098917] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 18.544184] procd: - early -
[ 18.580065] procd: - watchdog -
[ 19.630296] procd: - watchdog -
[ 19.671190] procd: - ubus -
[ 19.946288] random: ubusd: uninitialized urandom read (4 bytes read)
[ 20.025809] random: ubusd: uninitialized urandom read (4 bytes read)
[ 20.102960] random: ubusd: uninitialized urandom read (4 bytes read)
[ 20.188693] procd: - init -
[ 21.166424] kmodloader: loading kernel modules from /etc/modules.d/*
[ 21.251507] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 21.347929] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 22.287420] ath: EEPROM regdomain: 0x0
[ 22.287470] ath: EEPROM indicates default country code should be used
[ 22.287484] ath: doing EEPROM country->regdmn map search
[ 22.287530] ath: country maps to regdmn code: 0x3a
[ 22.287553] ath: Country alpha2 being used: US
[ 22.287568] ath: Regpair used: 0x3a
[ 22.290628] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 22.297900] ath5k: phy0: Atheros AR2317 chip found (MAC: 0x90, PHY: 0x48)
[ 22.496682] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 24.792537] urandom_read: 4 callbacks suppressed
[ 24.792579] random: jshn: uninitialized urandom read (4 bytes read)
[ 25.144620] random: jshn: uninitialized urandom read (4 bytes read)
[ 26.378829] random: jshn: uninitialized urandom read (4 bytes read)
[ 43.626312] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 44.015184] jffs2_build_filesystem(): unlocking the mtd device...
[ 44.015243] done.
[ 44.112911] jffs2_build_filesystem(): erasing all blocks after the end marker...
[ 59.213539] eth0: link up (100Mbps/full duplex)
[ 59.431960] br-lan: port 1(eth0.1) entered blocking state
[ 59.497131] br-lan: port 1(eth0.1) entered disabled state
[ 59.563771] device eth0.1 entered promiscuous mode
[ 59.621607] device eth0 entered promiscuous mode
[ 60.637489] br-lan: port 1(eth0.1) entered blocking state
[ 60.702589] br-lan: port 1(eth0.1) entered forwarding state
[ 67.826211] done.
[ 67.849791] jffs2: notice: (650) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 70.107830] overlayfs: upper fs does not support tmpfile.
[ 137.135206] random: crng init done
root@OpenWrt:/#
root@OpenWrt:/# free
total used free shared buffers cached
Mem: 12260 10500 1760 56 1192 3116
-/+ buffers/cache: 6192 6068
Swap: 0 0 0
root@OpenWrt:/#