FAQ o OpenWrt | Sprzedam różne routery | Oddam

2016-04-28 19:21:56

Wewnętrznym HDD wpiętym w SATA. Tam są wyłącznie pliki użytkowników dla Samby/FTP i DLNA.

2016-04-28 19:15:59

Specjalnie go zamówiłem pod debiana ze względu na dość małe rozmiary... Mam rozumieć, że nic się z nim nie wymyśli, tak?

2016-04-28 19:13:24

Urządzenie Rozruch   Początek      Koniec   Bloków   ID  System
/dev/sdb1            2048    15605759     7801856   83  Linux

2016-04-28 19:07:37

Mam na nim ext3 z wrzuconym debianem.

2016-04-28 19:02:13

Cześć, potrzebuje pomocy z odpaleniem debiana na chińskim pendrive. Debian wrzucony zgodnie z tutorialem na forum doozan. Na innym pendrive odpala bez problemu, na chińskim wynalazku niestety nie. Poniżej zrzut z konsoli:

U-Boot 2015.10-tld-1 (Nov 06 2015 - 16:19:43 -0800)
ZyXEL NSA310 1-Bay Power Media Server 


SoC:   Kirkwood 88F6281_A1
DRAM:  256 MiB (ECC not enabled)
WARNING: Caches not enabled
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
PHY reset timed out
MV88E1318 PHY initialized on egiga0
Hit any key to stop autoboot:  0 
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found

Partition Map for USB device 0  --   Partition Type: DOS

Part    Start Sector    Num Sectors    UUID        Type
  1    2048          15603712      00001098-01    83
loading envs from usb 0 ...
156 bytes read in 328 ms (0 Bytes/s)
importing envs ...
## Info: input data size = 16708 = 0x4144
3206562 bytes read in 459 ms (6.7 MiB/s)
7179935 bytes read in 640 ms (10.7 MiB/s)
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-4.5.0-kirkwood-tld-1
   Created:      2016-04-26  18:34:28 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3206498 Bytes = 3.1 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
   Image Name:   initramfs-4.4.0-kirkwood-tld-1
   Created:      2016-02-19   7:33:04 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    7179871 Bytes = 6.8 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
Using machid 0x118f from environment

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.5.0-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #4 PREEMPT Fri Mar 18 21:36:04 PDT 2016
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine model: ZyXEL NSA310
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sdb1 rootdelay=10 rootfstype=ext3 mtdparts=orion_nand:0x100000(uboot),0x80000(stock_uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2)
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 243396K/262144K available (6112K kernel code, 599K rwdata, 2024K rodata, 300K init, 315K bss, 18748K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07fa588   (8138 kB)
[    0.000000]       .init : 0xc07fb000 - 0xc0846000   ( 300 kB)
[    0.000000]       .data : 0xc0846000 - 0xc08dbc8c   ( 600 kB)
[    0.000000]        .bss : 0xc08dbc8c - 0xc092abe0   ( 316 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000008] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.000326] Console: colour dummy device 80x30
[    0.000357] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[    0.090101] pid_max: default: 32768 minimum: 301
[    0.090217] Security Framework initialized
[    0.090294] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090314] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091189] CPU: Testing write buffer coherency: ok
[    0.091647] Setting up static identity map for 0x8200 - 0x8258
[    0.091960] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
[    0.095716] devtmpfs: initialized
[    0.100874] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.101171] prandom: seed boundary self test passed
[    0.104910] prandom: 100 self tests passed
[    0.104934] pinctrl core: initialized pinctrl subsystem
[    0.106337] NET: Registered protocol family 16
[    0.106783] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.130104] cpuidle: using governor ladder
[    0.160106] cpuidle: using governor menu
[    0.160570] Feroceon L2: Enabling L2
[    0.160616] Feroceon L2: Cache support initialised.
[    0.166279] No ATAGs?
[    0.201538] vgaarb: loaded
[    0.201907] usbcore: registered new interface driver usbfs
[    0.201987] usbcore: registered new interface driver hub
[    0.202049] usbcore: registered new device driver usb
[    0.203184] clocksource: Switched to clocksource orion_clocksource
[    0.247758] VFS: Disk quotas dquot_6.6.0
[    0.247834] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.259362] NET: Registered protocol family 2
[    0.260165] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.260202] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.260233] TCP: Hash tables configured (established 2048 bind 2048)
[    0.260297] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.260320] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.260523] NET: Registered protocol family 1
[    0.260917] RPC: Registered named UNIX socket transport module.
[    0.260930] RPC: Registered udp transport module.
[    0.260937] RPC: Registered tcp transport module.
[    0.260944] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.261251] Unpacking initramfs...
[    0.903308] Freeing initrd memory: 7012K (c1100000 - c17d9000)
[    0.903469] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.904593] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.904670] audit: initializing netlink subsys (disabled)
[    0.904724] audit: type=2000 audit(0.900:1): initialized
[    0.905075] Initialise system trusted keyring
[    0.905462] zbud: loaded
[    0.906151] NFS: Registering the id_resolver key type
[    0.906188] Key type id_resolver registered
[    0.906198] Key type id_legacy registered
[    0.906227] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.906243] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.906475] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.907015] Key type big_key registered
[    0.926382] Key type asymmetric registered
[    0.926404] Asymmetric key parser 'x509' registered
[    0.926502] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.926520] io scheduler noop registered
[    0.926534] io scheduler deadline registered
[    0.926597] io scheduler cfq registered (default)
[    0.927930] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[    0.928627] irq: Cannot allocate irq_descs @ IRQ33, assuming pre-allocated
[    0.929072] irq: Cannot allocate irq_descs @ IRQ65, assuming pre-allocated
[    0.929924] mvebu-pcie mbus:pcie-controller: PCI host bridge to bus 0000:00
[    0.929942] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    0.929955] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[    0.929969] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.930370] PCI: bus0: Fast back to back transfers disabled
[    0.930396] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.943276] PCI: bus1: Fast back to back transfers disabled
[    0.943461] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff]
[    0.943477] pci 0000:00:01.0: BAR 13: assigned [io  0x10000-0x10fff]
[    0.943496] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref]
[    0.943513] pci 0000:01:00.0: BAR 4: assigned [mem 0xe0010000-0xe0013fff 64bit pref]
[    0.943537] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0014000-0xe0014fff 64bit pref]
[    0.943558] pci 0000:01:00.0: BAR 0: assigned [io  0x10000-0x100ff]
[    0.943574] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.943587] pci 0000:00:01.0:   bridge window [io  0x10000-0x10fff]
[    0.943602] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe00fffff]
[    0.943688] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
[    0.943999] mv_xor f1060800.xor: Marvell shared XOR driver
[    0.983890] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    0.984121] mv_xor f1060900.xor: Marvell shared XOR driver
[    1.023876] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    1.024354] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.025767] console [ttyS0] disabled
[    1.025831] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[    1.707541] console [ttyS0] enabled
[    1.712342] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[    1.718763] nand: Samsung NAND 128MiB 3,3V 8-bit
[    1.723421] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.731030] Scanning device for bad blocks
[    1.735412] Bad eraseblock 2 at 0x000000040000
[    1.739921] Bad eraseblock 3 at 0x000000060000
[    1.842566] 9 cmdlinepart partitions found on MTD device orion_nand
[    1.848884] Creating 9 MTD partitions on "orion_nand":
[    1.854065] 0x000000000000-0x000000100000 : "uboot"
[    1.860294] 0x000000100000-0x000000180000 : "stock_uboot_env"
[    1.867333] 0x000000180000-0x000000200000 : "key_store"
[    1.873831] 0x000000200000-0x000000280000 : "info"
[    1.879904] 0x000000280000-0x000000c80000 : "etc"
[    1.885954] 0x000000c80000-0x000001680000 : "kernel_1"
[    1.892369] 0x000001680000-0x000004640000 : "rootfs1"
[    1.898726] 0x000004640000-0x000005040000 : "kernel_2"
[    1.905155] 0x000005040000-0x000008000000 : "rootfs2"
[    1.912540] libphy: Fixed MDIO Bus: probed
[    1.917091] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.923695] ehci-pci: EHCI PCI platform driver
[    1.928232] ehci-orion: EHCI orion driver
[    1.932454] orion-ehci f1050000.ehci: EHCI Host Controller
[    1.938024] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[    1.945903] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[    1.963226] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[    1.969487] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.976340] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.983616] usb usb1: Product: EHCI Host Controller
[    1.988517] usb usb1: Manufacturer: Linux 4.5.0-kirkwood-tld-1 ehci_hcd
[    1.995178] usb usb1: SerialNumber: f1050000.ehci
[    2.000648] hub 1-0:1.0: USB hub found
[    2.004518] hub 1-0:1.0: 1 port detected
[    2.009441] mousedev: PS/2 mouse device common for all mice
[    2.015767] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0
[    2.022838] i2c /dev entries driver
[    2.029372] hidraw: raw HID events driver (C) Jiri Kosina
[    2.035238] drop_monitor: Initializing network drop monitor service
[    2.041797] NET: Registered protocol family 17
[    2.046633] Key type dns_resolver registered
[    2.051793] registered taskstats version 1
[    2.055982] Loading compiled-in X.509 certificates
[    2.060862] zswap: loaded using pool lzo/zbud
[    2.073322] Key type encrypted registered
[    2.078036] rtc-mv f1010300.rtc: setting system clock to 2016-04-28 18:02:56 UTC (1461866576)
[    2.089007] Freeing unused kernel memory: 300K (c07fb000 - c0846000)
Loading, please wait...
[    2.167429] systemd-udevd[84]: starting version 215
[    2.184320] random: systemd-udevd urandom read with 3 bits of entropy available
[    2.323294] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    2.485176] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    2.491935] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.511599] usb 1-1: Product: USB2.0 Hub
[    2.520930] hub 1-1:1.0: USB hub found
[    2.529555] hub 1-1:1.0: 4 ports detected
[    2.813218] usb 1-1.2: new high-speed USB device number 3 using orion-ehci
[    2.925410] usb 1-1.2: New USB device found, idVendor=090c, idProduct=1000
[    2.932331] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.939712] usb 1-1.2: Product: USB DISK
[    2.943669] usb 1-1.2: Manufacturer: SMI Corporation
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
done.
Gave up waiting for root device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
   - Check root= (did the system wait for the right device?)
 - Missing modules (cat /proc/modules; ls /dev)
ALERT!  /dev/sdb1 does not exist.  Dropping to a shell!
modprobe: can't change directory to '4.5.0-kirkwood-tld-1': No such file or directory
modprobe: can't change directory to '4.5.0-kirkwood-tld-1': No such file or directory
modprobe: can't change directory to '4.5.0-kirkwood-tld-1': No such file or directory
modprobe: can't change directory to '4.5.0-kirkwood-tld-1': No such file or directory
modprobe: can't change directory to '4.5.0-kirkwood-tld-1': No such file or directory
modprobe: can't change directory to '4.5.0-kirkwood-tld-1': No such file or directory
modprobe: can't change directory to '4.5.0-kirkwood-tld-1': No such file or directory
modprobe: can't change directory to '4.5.0-kirkwood-tld-1': No such file or directory


BusyBox v1.22.1 (Debian 1:1.22.0-9+deb8u1) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/bin/sh: can't access tty; job control turned off
(initramfs) [

printenv:

NSA310> printenv        
arcNumber=4022
baudrate=115200
bootargs=console=ttyS0,115200 root=/dev/sda1 rootdelay= rootfstype= mtdparts=orion_nand:0x100000(uboot),0x80000(stock_uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) init=/bin/systemd
bootcmd=run bootcmd_uenv; run bootcmd_usb; usb stop; run bootcmd_sata; reset
bootcmd_sata=run sata_init; run set_bootargs_sata; run sata_boot
bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi
bootcmd_usb=run usb_init; run set_bootargs_usb; run usb_boot
bootdelay=10
console=ttyS0,115200
device=0:1
ethact=egiga0
ethaddr=b6:d0:5e:0f:a1:17
led_error=orange blinking
led_exit=green off
led_init=green blinking
machid=118f
mainlineLinux=yes
mtdids=nand0=orion_nand
mtdparts=mtdparts=orion_nand:0x100000(uboot),0x80000(stock_uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2)
partition=nand0,2
rootdelay=10
rootfstype=ext3
sata_boot=mw 0x800000 0 1; run sata_load_uimage; if run sata_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi
sata_init=ide reset
sata_load_uimage=ext2load ide $device 0x800000 /boot/uImage
sata_load_uinitrd=ext2load ide $device 0x1100000 /boot/uInitrd
sata_root=/dev/sda1
set_bootargs_sata=setenv bootargs console=$console root=$sata_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts
set_bootargs_usb=setenv bootargs console=$console root=$usb_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts
stderr=serial
stdin=serial
stdout=serial
uenv_import=echo importing envs ...; env import -t 0x810000
uenv_load=usb start; setenv uenv_loaded 0; for devtype in usb; do for disknum in 0; do run uenv_read_disk; done; done
uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x810000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi
uenv_read_disk=if $devtype part $disknum; then run uenv_read; fi
usb_boot=mw 0x800000 0 1; run usb_load_uimage; if run usb_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi
usb_init=usb start
usb_load_uimage=ext4load usb $device 0x800000 /boot/uImage
usb_load_uinitrd=ext4load usb $device 0x1100000 /boot/uInitrd
usb_root=/dev/sdb1

Environment size: 2358/131068 bytes

Czy ktoś może podpowie, dlaczego nie chcę ruszyć?

2016-04-17 17:10:55

Cezary napisał/a:

Bartekk napisał/a:
Sterowniki od wifi w ar71xx bez zmian?
W stosunku do poprzedniej bez zmian większych.

A o dziwo na tej wersji problemów jak na razie od 2 dni żadnych nie doświadczyłem. WT3020 z 3372 również chodzi bez zająknięcia.

2016-04-09 22:03:39

Sterowniki od wifi w ar71xx bez zmian?

2016-03-28 12:57:31

jarek7714 napisał/a:

Bartekk napisał/a:
Lepszy fakt mobile, mi wychodzi 5zł/msc.
To to nie aktualne, także nie zawracajmy sobie głowy Fakt Mobile.

W sensie, że nie można przenieść się z faktu do RBM? Aż dziwne, bo startery u mnie dalej w sprzedaży, z ciekawości kupię i sprawdzę.

2016-03-28 09:55:14

Lepszy fakt mobile, mi wychodzi 5zł/msc.

2016-03-24 22:21:13

Dzięki, zrobiłem tak jak napisałeś i wszystko odpaliło.

2016-03-24 21:42:22

O to chodziło?

config zone
    option name 'n2n'
    option network 'n2n'
    option input 'ACCEPT'
        option output 'ACCEPT'
        option forward 'ACCEPT'
    option masq '1'


config redirect 'test'
    option name 'nsa310_ssh'
    option src 'wan'
    option dest 'n2n'
    option proto 'tcpudp'
    option src_dport '48563'
    option dest_ip '192.168.1.148'
    option dest_port '48563'

2016-03-24 20:52:25

Walczę z dostaniem się przez ssh do NAS'a z użyciem n2n lecz nie chcę mi to zadziałać. Bez problemu łączne się do routera. Poniżej configi:

root@OpenWrt:/etc/config# cat /etc/config/firewall

config defaults
    option syn_flood '1'
    option input 'ACCEPT'
    option output 'ACCEPT'
    option forward 'REJECT'

config zone
    option name 'lan'
    list network 'lan'
    option input 'ACCEPT'
    option output 'ACCEPT'
    option forward 'ACCEPT'

config zone
    option name 'wan'
    list network 'wan'
    list network 'wan6'
    option input 'REJECT'
    option output 'ACCEPT'
    option forward 'REJECT'
    option masq '1'
    option mtu_fix '1'

config forwarding
    option src 'lan'
    option dest 'wan'

config rule
    option name 'Allow-DHCP-Renew'
    option src 'wan'
    option proto 'udp'
    option dest_port '68'
    option target 'ACCEPT'
    option family 'ipv4'

config rule
    option name 'Allow-Ping'
    option src 'wan'
    option proto 'icmp'
    option icmp_type 'echo-request'
    option family 'ipv4'
    option target 'ACCEPT'

config rule
    option name 'Allow-IGMP'
    option src 'wan'
    option proto 'igmp'
    option family 'ipv4'
    option target 'ACCEPT'

config rule
    option name 'Allow-DHCPv6'
    option src 'wan'
    option proto 'udp'
    option src_ip 'fe80::/10'
    option src_port '547'
    option dest_ip 'fe80::/10'
    option dest_port '546'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-MLD'
    option src 'wan'
    option proto 'icmp'
    option src_ip 'fe80::/10'
    list icmp_type '130/0'
    list icmp_type '131/0'
    list icmp_type '132/0'
    list icmp_type '143/0'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-ICMPv6-Input'
    option src 'wan'
    option proto 'icmp'
    list icmp_type 'echo-request'
    list icmp_type 'echo-reply'
    list icmp_type 'destination-unreachable'
    list icmp_type 'packet-too-big'
    list icmp_type 'time-exceeded'
    list icmp_type 'bad-header'
    list icmp_type 'unknown-header-type'
    list icmp_type 'router-solicitation'
    list icmp_type 'neighbour-solicitation'
    list icmp_type 'router-advertisement'
    list icmp_type 'neighbour-advertisement'
    option limit '1000/sec'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-ICMPv6-Forward'
    option src 'wan'
    option dest '*'
    option proto 'icmp'
    list icmp_type 'echo-request'
    list icmp_type 'echo-reply'
    list icmp_type 'destination-unreachable'
    list icmp_type 'packet-too-big'
    list icmp_type 'time-exceeded'
    list icmp_type 'bad-header'
    list icmp_type 'unknown-header-type'
    option limit '1000/sec'
    option family 'ipv6'
    option target 'ACCEPT'

config include
    option path '/etc/firewall.user'

config rule
    option src 'wan'
    option dest 'lan'
    option proto 'esp'
    option target 'ACCEPT'

config rule
    option src 'wan'
    option dest 'lan'
    option dest_port '500'
    option proto 'udp'
    option target 'ACCEPT'

config forwarding
    option src 'lan'
    option dest 'n2n'





config redirect
    option name 'nsa310_ssh'
    option src 'n2n'
    option dest 'lan'
    option proto 'udp'
    option src_dport '48563'
    option dest_ip '192.168.1.148'
    option dest_port '48563'

root@OpenWrt:/etc/config# cat /etc/config/network

config interface 'loopback'
    option ifname 'lo'
    option proto 'static'
    option ipaddr '127.0.0.1'
    option netmask '255.0.0.0'

config globals 'globals'
    option ula_prefix 'fda9:45f4:1d09::/48'

config interface 'lan'
    option ifname 'eth0.1'
    option force_link '1'
    option type 'bridge'
    option proto 'static'
    option ipaddr '192.168.1.1'
    option netmask '255.255.255.0'
    option ip6assign '60'

config interface 'wan'
    option ifname 'eth0.2'
    option proto 'dhcp'
    option macaddr 'xxxxxxxxx'

config interface 'wan6'
    option ifname 'eth0.2'
    option proto 'dhcpv6'

config switch
    option name 'switch0'
    option reset '1'
    option enable_vlan '1'

config switch_vlan
    option device 'switch0'
    option vlan '1'
    option ports '0t 1 2 3 4'

config switch_vlan
    option device 'switch0'
    option vlan '2'
    option ports '0t 5'

config interface 'n2n'
    option ifname 'edge0'
    option proto 'static'
    option netmask '255.255.255.0'
    option ipaddr '1.2.3.2'

2016-03-24 18:24:06

Cezary napisał/a:

To CC na którym jest gargoyle ma nowsze sterowniki wifi, backport z trunka, CC na tym jeszcze nie udostępniłem. Więc sprawdź jak się w trunku zachowuje i ew zgłaszaj na dev.openwrt.org

DESIGNATED DRIVER (Bleeding Edge, r49037) - od południa wszystko ok.

2016-03-23 13:48:24

Na CC od Ciebie również się tak działo ale rzadziej, mamy 13;14 i od rana 3 razy padło. Teraz było tak, że wifi w ogóle nie było, wcześniej z rana było tak iż wifi było dostępne ale nie dało rady nawiązać połączenia.

2016-03-23 13:33:54

WD-N750 / co jakiś czas tracę wifi / fragment logu:

Wed Mar 23 11:16:58 2016 daemon.info hostapd: wlan0: STA xxxxxxxxxxx WPA: group key handshake completed (RSN)
Wed Mar 23 11:22:58 2016 authpriv.info dropbear[31558]: Exit (root): Disconnect received
Wed Mar 23 11:23:00 2016 daemon.info hostapd: wlan1: STA xxxxxxx IEEE 802.11: authenticated
Wed Mar 23 11:23:00 2016 daemon.info hostapd: wlan1: STA xxxxxxxx IEEE 802.11: associated (aid 1)
Wed Mar 23 11:23:00 2016 daemon.info hostapd: wlan1: STA xxxxx WPA: pairwise key handshake completed (RSN)
Wed Mar 23 11:23:00 2016 daemon.info dnsmasq-dhcp[23333]: DHCPREQUEST(br-lan) 192.168.1.236 xxxxxxxxx 
Wed Mar 23 11:23:00 2016 daemon.info dnsmasq-dhcp[23333]: DHCPACK(br-lan) 192.168.1.236 xxxxxxxxxxx android-167feca7b754c112
Wed Mar 23 11:23:15 2016 user.notice root: reboot
Wed Mar 23 11:23:16 2016 kern.info kernel: [77383.160000] device wlan1 left promiscuous mode
Wed Mar 23 11:23:16 2016 kern.info kernel: [77383.160000] br-lan: port 2(wlan1) entered disabled state
Wed Mar 23 11:23:16 2016 daemon.notice netifd: Network device 'wlan1' link is down
Wed Mar 23 11:23:16 2016 kern.info kernel: [77383.210000] device wlan0 left promiscuous mode
Wed Mar 23 11:23:16 2016 kern.info kernel: [77383.210000] br-lan: port 3(wlan0) entered disabled state
Wed Mar 23 11:23:16 2016 daemon.notice netifd: Network device 'wlan0' link is down
Wed Mar 23 13:24:00 2016 daemon.info dnsmasq-dhcp[23333]: DHCPREQUEST(br-lan) 192.168.1.107 xxxxxxxxxxxxx 
Wed Mar 23 13:24:00 2016 daemon.info dnsmasq-dhcp[23333]: DHCPACK(br-lan) 192.168.1.107 xxxxxxxxxx bartekk-K53SV
Wed Mar 23 13:24:01 2016 kern.info kernel: [84628.590000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 3 is up
Wed Mar 23 13:24:22 2016 daemon.err uhttpd[3590]: sh: write error: Broken pipe
Wed Mar 23 13:24:22 2016 daemon.err uhttpd[3590]: sh: write error: Broken pipe
Wed Mar 23 13:24:22 2016 daemon.err uhttpd[3590]: sh: write error: Broken pipe
Wed Mar 23 13:24:22 2016 daemon.err uhttpd[3590]: sh: write error: Broken pipe
Wed Mar 23 13:24:23 2016 daemon.err uhttpd[3590]: sh: write error: Broken pipe
Wed Mar 23 13:24:23 2016 daemon.err uhttpd[3590]: sh: write error: Broken pipe
Wed Mar 23 13:24:23 2016 daemon.err uhttpd[3590]: sh: write error: Broken pipe
Wed Mar 23 13:24:23 2016 daemon.err uhttpd[3590]: sh: write error: Broken pipe
Success

2016-03-20 18:12:46

Norbix1999 napisał/a:

Gruberek napisał/a:
5.39.95.124:9876
Supernode przestał działać
Proszę o naprawę

Udało Ci się znaleźć rozwiązanie problemu? Ja również nie mogę się połączyć z urządzeniami na tym adresie.

PS Supernode jest odpalony na v1, dlatego nie łączyło.

2016-03-19 14:46:10

Generowanie certyfikatów openvpn działa w porządku?

2016-03-13 10:50:07

intruder napisał/a:

edass napisał/a:
...jaką wersję FW i WEBUI do modemu e3372s-153...
E3372s-153_Update_22.286.03.00.00_L_ADB_TLN_02
Update_WEBUI_16.100.05.00.03_V7R2_CPIO_Mod1.5

http://4pda.ru/forum/index.php?showtopi … ry34621099

Czy to jest ta wersja ze wszystkim fiuczerami? Na drugim modemie miałem taki soft:

i miał wszystkie dostępne funkcje.

2016-02-19 16:43:21

Fakt mobile. Wychodzi 5zł/msc i RBM niecałe 17zł/msc(100Gb LTE). Używam aktualnie RBM, za 2 tygodnie się dowiem czy fakt również odpali, ale raczej nie powinno być z tym problemów.

2016-01-01 11:44:16

Czy któryś z kolegów, który ma router na biurku przetestować openwrt z poprawką dla failsafe mode? Mój niestety na dachu i nie mam tego sprawdzić, a jestem ciekaw czy zadziała. Niżej link z openwrt:

http://www.filedropper.com/openwrt-rami … sysupgrade

2015-12-29 16:32:34

Wystarczyło cdc-ether + usb-storage na kartę pamięci w modemie. Działa bez problemu.

2015-12-29 13:51:46

Co jakiś czas resetuje mi się router z 3372. Logi:

Mon Dec 21 20:41:25 2015 kern.debug kernel: [    8.190000] rt2880-pinmux pinctrl: request pin 72 (io72) for pio:72
Mon Dec 21 20:41:25 2015 kern.info kernel: [    8.200000] usbcore: registered new interface driver usb-storage
Mon Dec 21 20:41:25 2015 kern.info kernel: [    8.360000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Mon Dec 21 20:41:25 2015 user.info kernel: [    8.390000] init: - preinit -
Mon Dec 21 20:41:25 2015 kern.debug kernel: [    8.600000] usb 1-1: no of_node; not parsing pinctrl DT
Mon Dec 21 20:41:25 2015 kern.debug kernel: [    8.790000] usb-storage 1-1:1.2: no of_node; not parsing pinctrl DT
Mon Dec 21 20:41:25 2015 kern.info kernel: [    8.790000] usb-storage 1-1:1.2: USB Mass Storage device detected
Mon Dec 21 20:41:25 2015 kern.info kernel: [    8.810000] scsi host0: usb-storage 1-1:1.2
Mon Dec 21 20:41:25 2015 kern.notice kernel: [    9.820000] scsi 0:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
Mon Dec 21 20:41:25 2015 kern.debug kernel: [    9.830000] sd 0:0:0:0: no of_node; not parsing pinctrl DT
Mon Dec 21 20:41:25 2015 kern.notice kernel: [    9.910000] sd 0:0:0:0: [sda] Attached SCSI removable disk
Mon Dec 21 20:41:25 2015 kern.info kernel: [    9.950000] 8021q: adding VLAN 0 to HW filter on device eth0
Mon Dec 21 20:41:25 2015 kern.notice kernel: [   10.010000] random: mktemp urandom read with 17 bits of entropy available
Mon Dec 21 20:41:25 2015 user.info kernel: [   13.240000] mount_root: loading kmods from internal overlay
Mon Dec 21 20:41:25 2015 kern.notice kernel: [   14.380000] jffs2: notice: (370) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Mon Dec 21 20:41:25 2015 user.info kernel: [   14.420000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Mon Dec 21 20:41:25 2015 user.info kernel: [   14.450000] block: extroot: not configured
Mon Dec 21 20:41:25 2015 kern.notice kernel: [   14.700000] jffs2: notice: (366) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Mon Dec 21 20:41:25 2015 user.info kernel: [   15.610000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Mon Dec 21 20:41:25 2015 user.info kernel: [   15.640000] block: extroot: not configured
Mon Dec 21 20:41:25 2015 user.info kernel: [   15.650000] mount_root: switching to jffs2 overlay
Mon Dec 21 20:41:25 2015 user.info kernel: [   15.690000] procd: - early -
Mon Dec 21 20:41:25 2015 user.info kernel: [   15.700000] procd: - watchdog -
Mon Dec 21 20:41:25 2015 user.info kernel: [   16.750000] procd: - ubus -
Mon Dec 21 20:41:25 2015 user.info kernel: [   17.770000] procd: - init -
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.440000] NET: Registered protocol family 10
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.480000] gre: GRE over IPv4 demultiplexor driver
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.490000] ip_gre: GRE over IPv4 tunneling driver
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.510000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.660000] u32 classifier
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.670000]     input device check on
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.680000]     Actions configured
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.680000] Mirror/redirect action on
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.710000] netem: version 1.3
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.730000] fuse init (API version 7.23)
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.750000] usbcore: registered new interface driver cdc_acm
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.760000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.780000] usbcore: registered new interface driver cdc_wdm
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.790000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.810000] Backport generated by backports.git backports-20150129-0-gdd4a670
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.820000] ip_tables: (C) 2000-2006 Netfilter Core Team
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.850000] nf_conntrack version 0.5.0 (958 buckets, 3832 max)
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.880000] usbcore: registered new interface driver usblp
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.910000] usbcore: registered new interface driver usbserial
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.920000] usbcore: registered new interface driver usbserial_generic
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.930000] usbserial: USB Serial support registered for generic
Mon Dec 21 20:41:25 2015 kern.info kernel: [   19.990000] xt_time: kernel timezone is -0000
Mon Dec 21 20:41:25 2015 kern.debug kernel: [   20.000000] cdc_ether 1-1:1.0: no of_node; not parsing pinctrl DT
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.050000] cdc_ether 1-1:1.0 eth1: register 'cdc_ether' at usb-101c0000.ehci-1, CDC Ethernet Device, 0c:5b:8f:27:9a:64
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.080000] usbcore: registered new interface driver cdc_ether
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.130000] usbcore: registered new interface driver cdc_ncm
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.200000] cfg80211: Calling CRDA to update world regulatory domain
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.230000] usbcore: registered new interface driver huawei_cdc_ncm
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.300000] cfg80211: World regulatory domain updated:
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.310000] cfg80211:  DFS Master region: unset
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.310000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.330000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.350000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.370000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.380000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.400000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.420000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.430000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.450000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.490000] PPP generic driver version 2.4.2
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.510000] PPP MPPE Compression module registered
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.520000] NET: Registered protocol family 24
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.530000] PPTP driver version 0.8.5
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.560000] usbcore: registered new interface driver qmi_wwan
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.580000] usbcore: registered new interface driver rndis_host
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.610000] usbcore: registered new interface driver sierra
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.620000] usbserial: USB Serial support registered for Sierra USB modem
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.640000] usbcore: registered new interface driver sierra_net
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.670000] usbcore: registered new interface driver cdc_mbim
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.680000] usbcore: registered new interface driver option
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.690000] usbserial: USB Serial support registered for GSM modem (1-port)
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.740000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0500 detected
Mon Dec 21 20:41:25 2015 kern.info kernel: [   20.760000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
Mon Dec 21 20:41:25 2015 kern.debug kernel: [   20.770000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Mon Dec 21 20:41:27 2015 user.emerg syslog: 'radio0' is disabled
Mon Dec 21 20:41:27 2015 user.emerg syslog: 'radio0' is disabled
Mon Dec 21 20:41:28 2015 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Mon Dec 21 20:41:29 2015 daemon.err block: /dev/mtdblock6 is already mounted
Mon Dec 21 20:41:31 2015 authpriv.info dropbear[1262]: Not backgrounding
Mon Dec 21 20:41:32 2015 user.emerg syslog: SQM: QDISC fq_codel is useable.
Mon Dec 21 20:41:32 2015 user.notice SQM: QDISC fq_codel is useable.
Mon Dec 21 20:41:32 2015 user.emerg syslog: SQM: QDISC efq_codel is NOT useable.
Mon Dec 21 20:41:32 2015 user.notice SQM: QDISC efq_codel is NOT useable.
Mon Dec 21 20:41:32 2015 user.emerg syslog: SQM: QDISC nfq_codel is NOT useable.
Mon Dec 21 20:41:32 2015 user.notice SQM: QDISC nfq_codel is NOT useable.
Mon Dec 21 20:41:32 2015 user.emerg syslog: SQM: QDISC sfq is useable.
Mon Dec 21 20:41:32 2015 user.notice SQM: QDISC sfq is useable.
Mon Dec 21 20:41:32 2015 user.emerg syslog: SQM: QDISC codel is useable.
Mon Dec 21 20:41:32 2015 user.notice SQM: QDISC codel is useable.
Mon Dec 21 20:41:32 2015 user.emerg syslog: SQM: QDISC ns2_codel is NOT useable.
Mon Dec 21 20:41:32 2015 user.notice SQM: QDISC ns2_codel is NOT useable.
Mon Dec 21 20:41:32 2015 user.emerg syslog: SQM: QDISC pie is useable.
Mon Dec 21 20:41:32 2015 user.notice SQM: QDISC pie is useable.
Mon Dec 21 20:41:32 2015 user.emerg syslog: SQM: QDISC cake is NOT useable.
Mon Dec 21 20:41:32 2015 user.notice SQM: QDISC cake is NOT useable.
Mon Dec 21 20:41:33 2015 kern.info kernel: [   31.100000] 8021q: adding VLAN 0 to HW filter on device eth0
Mon Dec 21 20:41:33 2015 kern.info kernel: [   31.120000] device eth0.1 entered promiscuous mode
Mon Dec 21 20:41:33 2015 kern.info kernel: [   31.130000] device eth0 entered promiscuous mode
Mon Dec 21 20:41:33 2015 kern.info kernel: [   31.160000] br-lan: port 1(eth0.1) entered forwarding state
Mon Dec 21 20:41:33 2015 kern.info kernel: [   31.170000] br-lan: port 1(eth0.1) entered forwarding state
Mon Dec 21 20:41:33 2015 daemon.notice netifd: Interface 'lan' is enabled
Mon Dec 21 20:41:33 2015 daemon.notice netifd: Interface 'lan' is setting up now
Mon Dec 21 20:41:33 2015 daemon.notice netifd: Interface 'lan' is now up
Mon Dec 21 20:41:33 2015 daemon.notice netifd: Interface 'loopback' is enabled
Mon Dec 21 20:41:33 2015 daemon.notice netifd: Interface 'loopback' is setting up now
Mon Dec 21 20:41:33 2015 daemon.notice netifd: Interface 'loopback' is now up
Mon Dec 21 20:41:33 2015 kern.err kernel: [   31.240000] cdc_ether 1-1:1.0 eth1: kevent 12 may have been dropped
Mon Dec 21 20:41:33 2015 kern.err kernel: [   31.250000] cdc_ether 1-1:1.0 eth1: kevent 11 may have been dropped
Mon Dec 21 20:41:33 2015 kern.err kernel: [   31.270000] cdc_ether 1-1:1.0 eth1: kevent 11 may have been dropped
Mon Dec 21 20:41:33 2015 daemon.notice netifd: Interface 'wan' is enabled
Mon Dec 21 20:41:33 2015 daemon.notice netifd: Interface 'wan' is setting up now
Mon Dec 21 20:41:33 2015 daemon.notice netifd: Interface 'wan6' is enabled
Mon Dec 21 20:41:33 2015 daemon.notice netifd: Bridge 'br-lan' link is up
Mon Dec 21 20:41:33 2015 daemon.notice netifd: Interface 'lan' has link connectivity 
Mon Dec 21 20:41:34 2015 daemon.notice netifd: Network device 'eth0' link is up
Mon Dec 21 20:41:34 2015 daemon.notice netifd: VLAN 'eth0.2' link is up
Mon Dec 21 20:41:34 2015 daemon.notice netifd: Interface 'wan6' has link connectivity 
Mon Dec 21 20:41:34 2015 daemon.notice netifd: Interface 'wan6' is setting up now
Mon Dec 21 20:41:34 2015 daemon.notice netifd: VLAN 'eth0.1' link is up
Mon Dec 21 20:41:34 2015 daemon.notice netifd: Network device 'lo' link is up
Mon Dec 21 20:41:34 2015 daemon.notice netifd: Interface 'loopback' has link connectivity 
Mon Dec 21 20:41:34 2015 daemon.notice netifd: Network device 'eth1' link is up
Mon Dec 21 20:41:34 2015 daemon.notice netifd: Interface 'wan' has link connectivity 
Mon Dec 21 20:41:34 2015 daemon.notice netifd: wan (1566): udhcpc (v1.23.2) started
Mon Dec 21 20:41:34 2015 daemon.notice netifd: wan (1566): Sending discover...
Mon Dec 21 20:41:34 2015 daemon.notice netifd: wan (1566): Sending select for 192.168.8.100...
Mon Dec 21 20:41:34 2015 daemon.notice netifd: wan (1566): Lease of 192.168.8.100 obtained, lease time 86400
Mon Dec 21 20:41:35 2015 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Mon Dec 21 20:41:35 2015 daemon.notice netifd: Interface 'wan' is now up
Mon Dec 21 20:41:35 2015 kern.info kernel: [   33.170000] br-lan: port 1(eth0.1) entered forwarding state
Mon Dec 21 20:41:37 2015 user.emerg syslog: setting up led power
Mon Dec 21 20:41:38 2015 daemon.info procd: - init complete -
Mon Dec 21 20:41:40 2015 daemon.info dnsmasq[1713]: started, version 2.73 cachesize 150
Mon Dec 21 20:41:40 2015 daemon.info dnsmasq[1713]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Mon Dec 21 20:41:40 2015 daemon.info dnsmasq[1713]: DNS service limited to local subnets
Mon Dec 21 20:41:40 2015 daemon.info dnsmasq-dhcp[1713]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 12h
Mon Dec 21 20:41:40 2015 daemon.info dnsmasq[1713]: using local addresses only for domain lan
Mon Dec 21 20:41:40 2015 daemon.info dnsmasq[1713]: reading /tmp/resolv.conf.auto
Mon Dec 21 20:41:40 2015 daemon.info dnsmasq[1713]: using local addresses only for domain lan
Mon Dec 21 20:41:40 2015 daemon.info dnsmasq[1713]: using nameserver 192.168.8.1#53
Mon Dec 21 20:41:40 2015 daemon.info dnsmasq[1713]: using nameserver 192.168.8.1#53
Mon Dec 21 20:41:40 2015 daemon.info dnsmasq[1713]: read /etc/hosts - 1 addresses
Mon Dec 21 20:41:40 2015 daemon.info dnsmasq[1713]: read /tmp/hosts/dhcp - 1 addresses
Mon Dec 21 20:41:40 2015 daemon.info dnsmasq-dhcp[1713]: read /etc/ethers - 0 addresses
Mon Dec 21 20:41:42 2015 user.notice firewall: Reloading firewall due to ifup of wan (eth1)
Mon Dec 21 20:41:43 2015 user.notice ddns-scripts[1957]: myddns_ipv4: PID '1957' started at 2015-12-21 20:41
Mon Dec 21 20:41:43 2015 user.warn ddns-scripts[1957]: myddns_ipv4: Service section disabled! - TERMINATE
Mon Dec 21 20:41:43 2015 user.warn ddns-scripts[1957]: myddns_ipv4: PID '1957' exit WITH ERROR '1' at 2015-12-21 20:41
Mon Dec 21 20:41:44 2015 kern.notice kernel: [   41.460000] random: nonblocking pool is initialized
Sun Dec 27 18:16:05 2015 daemon.info dnsmasq-dhcp[1713]: DHCPREQUEST(br-lan) 192.168.2.214 00:90:a9:0b:a5:0a 
Sun Dec 27 18:16:05 2015 daemon.info dnsmasq-dhcp[1713]: DHCPACK(br-lan) 192.168.2.214 00:90:a9:0b:a5:0a 
Sun Dec 27 18:16:08 2015 daemon.warn odhcpd[1204]: DHCPV6 REQUEST IA_NA from 000300010090a90ba50a on br-lan: ok fd10:a0c1:4cc0::665/128 
Sun Dec 27 18:16:08 2015 daemon.warn odhcpd[1204]: DHCPV6 REQUEST IA_PD from 000300010090a90ba50a on br-lan: ok fd10:a0c1:4cc0:4::/62 
Sun Dec 27 18:16:08 2015 daemon.info dnsmasq[1713]: read /etc/hosts - 1 addresses
Sun Dec 27 18:16:08 2015 daemon.info dnsmasq[1713]: read /tmp/hosts/odhcpd - 1 addresses
Sun Dec 27 18:16:08 2015 daemon.info dnsmasq[1713]: read /tmp/hosts/dhcp - 1 addresses
Sun Dec 27 18:16:08 2015 daemon.info dnsmasq-dhcp[1713]: read /etc/ethers - 0 addresses
Sun Dec 27 18:16:08 2015 daemon.info dnsmasq[1713]: read /etc/hosts - 1 addresses
Sun Dec 27 18:16:08 2015 daemon.info dnsmasq[1713]: read /tmp/hosts/odhcpd - 1 addresses
Sun Dec 27 18:16:08 2015 daemon.info dnsmasq[1713]: read /tmp/hosts/dhcp - 1 addresses
Sun Dec 27 18:16:08 2015 daemon.info dnsmasq-dhcp[1713]: read /etc/ethers - 0 addresses
Mon Dec 28 00:16:05 2015 daemon.info dnsmasq-dhcp[1713]: DHCPREQUEST(br-lan) 192.168.2.214 00:90:a9:0b:a5:0a 
Mon Dec 28 00:16:05 2015 daemon.info dnsmasq-dhcp[1713]: DHCPACK(br-lan) 192.168.2.214 00:90:a9:0b:a5:0a 
Mon Dec 28 01:02:34 2015 daemon.notice netifd: wan (1566): Sending renew...
Mon Dec 28 01:02:34 2015 daemon.notice netifd: wan (1566): Lease of 192.168.8.100 obtained, lease time 86400
Mon Dec 28 06:16:05 2015 daemon.info dnsmasq-dhcp[1713]: DHCPREQUEST(br-lan) 192.168.2.214 00:90:a9:0b:a5:0a 
Mon Dec 28 06:16:05 2015 daemon.info dnsmasq-dhcp[1713]: DHCPACK(br-lan) 192.168.2.214 00:90:a9:0b:a5:0a 
Mon Dec 28 12:16:05 2015 daemon.info dnsmasq-dhcp[1713]: DHCPREQUEST(br-lan) 192.168.2.214 00:90:a9:0b:a5:0a 
Mon Dec 28 12:16:05 2015 daemon.info dnsmasq-dhcp[1713]: DHCPACK(br-lan) 192.168.2.214 00:90:a9:0b:a5:0a 
Mon Dec 28 13:02:34 2015 daemon.notice netifd: wan (1566): Sending renew...
Mon Dec 28 13:02:34 2015 daemon.notice netifd: wan (1566): Lease of 192.168.8.100 obtained, lease time 86400
Mon Dec 28 17:36:40 2015 kern.info kernel: [102877.960000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Mon Dec 28 18:16:05 2015 daemon.info dnsmasq-dhcp[1713]: DHCPREQUEST(br-lan) 192.168.2.214 00:90:a9:0b:a5:0a 
Mon Dec 28 18:16:05 2015 daemon.info dnsmasq-dhcp[1713]: DHCPACK(br-lan) 192.168.2.214 00:90:a9:0b:a5:0a 
Tue Dec 29 00:16:05 2015 daemon.info dnsmasq-dhcp[1713]: DHCPREQUEST(br-lan) 192.168.2.214 00:90:a9:0b:a5:0a 
Tue Dec 29 00:16:05 2015 daemon.info dnsmasq-dhcp[1713]: DHCPACK(br-lan) 192.168.2.214 00:90:a9:0b:a5:0a 
Tue Dec 29 01:02:34 2015 daemon.notice netifd: wan (1566): Sending renew...
Tue Dec 29 01:02:34 2015 daemon.notice netifd: wan (1566): Lease of 192.168.8.100 obtained, lease time 86400
Tue Dec 29 06:16:06 2015 daemon.info dnsmasq-dhcp[1713]: DHCPREQUEST(br-lan) 192.168.2.214 00:90:a9:0b:a5:0a 
Tue Dec 29 06:16:06 2015 daemon.info dnsmasq-dhcp[1713]: DHCPACK(br-lan) 192.168.2.214 00:90:a9:0b:a5:0a 
Tue Dec 29 12:16:05 2015 daemon.info dnsmasq-dhcp[1713]: DHCPREQUEST(br-lan) 192.168.2.214 00:90:a9:0b:a5:0a 
Tue Dec 29 12:16:05 2015 daemon.info dnsmasq-dhcp[1713]: DHCPACK(br-lan) 192.168.2.214 00:90:a9:0b:a5:0a 
Tue Dec 29 13:02:34 2015 daemon.notice netifd: wan (1566): Sending renew...
Tue Dec 29 13:02:35 2015 daemon.notice netifd: wan (1566): Lease of 192.168.8.100 obtained, lease time 86400

Ja niestety nie widzę nic złego. Korzystając, czy do działania hilinka 3372 na czystym openwrt potrzebuje jedynie modułu cdc_ether? Aktualnie mam wrzuconą wersję z luci, która w ogóle nie jest mi potrzebna, a zajmuje swoje + dodatkowe pakiety.

2015-12-15 21:38:30

Przyjmuje openwrt czy wyłącznie oryginalne firmware? Pytam, bo przygotował bym sobie pliki i jutro w pracy postawił go na nogi.

2015-12-15 18:59:33

Uwaliłem router i nie da się z nim połączyć po ssh. Mam dostępo przez failsafe, ale niestety na nim nie działa firstboot. W jaki sposób mogę teraz wrzucić nowe openwrt?

2015-12-10 18:13:25

Chyba chodziło Ci o akceleracje w celu poprawy wydajności niż szyfrowanie, bo nie mogę zrozumieć.

FAQ o OpenWrt | Sprzedam różne routery | Oddam

Opcje wyszukiwania (Strona 11 z 36)

Znalezione posty: 251 do 275 z 882

251 Odpowiedź przez Bartekk 2016-04-28 19:21:56

Odp: Debian 8.0 - nie bootuje z pendrive (18 odpowiedzi, napisanych Debian Mini HowTo)

252 Odpowiedź przez Bartekk 2016-04-28 19:15:59

Odp: Debian 8.0 - nie bootuje z pendrive (18 odpowiedzi, napisanych Debian Mini HowTo)

253 Odpowiedź przez Bartekk 2016-04-28 19:13:24

Odp: Debian 8.0 - nie bootuje z pendrive (18 odpowiedzi, napisanych Debian Mini HowTo)

254 Odpowiedź przez Bartekk 2016-04-28 19:07:37

Odp: Debian 8.0 - nie bootuje z pendrive (18 odpowiedzi, napisanych Debian Mini HowTo)

255 Temat przez Bartekk 2016-04-28 19:02:13

Temat: Debian 8.0 - nie bootuje z pendrive (18 odpowiedzi, napisanych Debian Mini HowTo)

256 Odpowiedź przez Bartekk 2016-04-17 17:10:55

Odp: Gargoyle 1.9.0.2 (204 odpowiedzi, napisanych Oprogramowanie / Software)

257 Odpowiedź przez Bartekk 2016-04-09 22:03:39

Odp: Gargoyle 1.9.0.2 (204 odpowiedzi, napisanych Oprogramowanie / Software)

258 Odpowiedź przez Bartekk 2016-03-28 12:57:31

Odp: Modem LTE (36 odpowiedzi, napisanych Oprogramowanie / Software)

259 Odpowiedź przez Bartekk 2016-03-28 09:55:14

Odp: Modem LTE (36 odpowiedzi, napisanych Oprogramowanie / Software)

260 Odpowiedź przez Bartekk 2016-03-24 22:21:13

Odp: LTE - dostęp z zewnątrz do sieci LAN (51 odpowiedzi, napisanych Oprogramowanie / Software)

261 Odpowiedź przez Bartekk 2016-03-24 21:42:22

Odp: LTE - dostęp z zewnątrz do sieci LAN (51 odpowiedzi, napisanych Oprogramowanie / Software)

262 Odpowiedź przez Bartekk 2016-03-24 20:52:25

Odp: LTE - dostęp z zewnątrz do sieci LAN (51 odpowiedzi, napisanych Oprogramowanie / Software)

263 Odpowiedź przez Bartekk 2016-03-24 18:24:06

Odp: Gargoyle 1.9.0.1 (304 odpowiedzi, napisanych Oprogramowanie / Software)

264 Odpowiedź przez Bartekk 2016-03-23 13:48:24

Odp: Gargoyle 1.9.0.1 (304 odpowiedzi, napisanych Oprogramowanie / Software)

265 Odpowiedź przez Bartekk 2016-03-23 13:33:54

Odp: Gargoyle 1.9.0.1 (304 odpowiedzi, napisanych Oprogramowanie / Software)

266 Odpowiedź przez Bartekk 2016-03-20 18:12:46

Odp: Wystawienie supernode n2n (10 odpowiedzi, napisanych Oprogramowanie / Software)

267 Odpowiedź przez Bartekk 2016-03-19 14:46:10

Odp: Gargoyle 1.9.0.1 (304 odpowiedzi, napisanych Oprogramowanie / Software)

268 Odpowiedź przez Bartekk 2016-03-13 10:50:07

Odp: 3ginfo ze wsparciem dla modemów Huawei HiLink (271 odpowiedzi, napisanych Oprogramowanie / Software)

269 Odpowiedź przez Bartekk 2016-02-19 16:43:21

Odp: Jaki Internet mobilny na karte? (9 odpowiedzi, napisanych Inne)

270 Odpowiedź przez Bartekk 2016-01-01 11:44:16

Odp: NEXX WT3020H (519 odpowiedzi, napisanych Oprogramowanie / Software)

271 Odpowiedź przez Bartekk 2015-12-29 16:32:34

Odp: NEXX WT3020H (519 odpowiedzi, napisanych Oprogramowanie / Software)

272 Odpowiedź przez Bartekk 2015-12-29 13:51:46

Odp: NEXX WT3020H (519 odpowiedzi, napisanych Oprogramowanie / Software)

273 Odpowiedź przez Bartekk 2015-12-15 21:38:30

Odp: NEXX WT3020H (519 odpowiedzi, napisanych Oprogramowanie / Software)

274 Odpowiedź przez Bartekk 2015-12-15 18:59:33

Odp: NEXX WT3020H (519 odpowiedzi, napisanych Oprogramowanie / Software)

275 Odpowiedź przez Bartekk 2015-12-10 18:13:25

Odp: Internet mobilny - VPN (11 odpowiedzi, napisanych Oprogramowanie / Software)

Znalezione posty: 251 do 275 z 882