• Zarejestrowany: 2010-08-06
  • Posty: 123

Temat: NEXX WT3020H

Cześć, możecie podrzucić linki do obrazu dla NEXXa, najlepiej z gargulcem, w zmianach pisze że obraz jest ale nie mogę go znaleźć, będe wdzięczny za pomoc.

2 Odpowiedź przez pepe2k

  • pepe2k
  • pepe2k
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-29
  • Posty: 5,028

Odp: NEXX WT3020H

http://dl.eko.one.pl/barrier_breaker/ramips/

Szukaj: openwrt-ramips-mt7620n-wt3020-*

Gargoyle na to aktualnie nie ma.

3 Odpowiedź przez neonbloow

  • Zarejestrowany: 2010-08-06
  • Posty: 123

Odp: NEXX WT3020H

Dzięki, zainstalowałem, routerek jest genialny. Pozdrawiam

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,863

Odp: NEXX WT3020H

Wrzuć tu wynik logread po starcie systemu.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez neonbloow

  • Zarejestrowany: 2010-08-06
  • Posty: 123

Odp: NEXX WT3020H

Wed Nov 19 14:07:25 2014 kern.debug kernel: [    5.270000] rt2880-pinmux pinctrl.1: request pin 72 (io72) for pio:72
Wed Nov 19 14:07:25 2014 kern.info kernel: [    5.280000] usbcore: registered new interface driver usb-storage
Wed Nov 19 14:07:25 2014 kern.info kernel: [    5.830000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Wed Nov 19 14:07:25 2014 kern.notice kernel: [    9.600000] jffs2: notice: (319) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 11 of xref (0 dead, 3 orphan) found.
Wed Nov 19 14:07:25 2014 kern.notice kernel: [    9.920000] jffs2: notice: (316) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 11 of xref (0 dead, 3 orphan) found.
Wed Nov 19 14:07:25 2014 kern.info kernel: [   12.570000] NET: Registered protocol family 10
Wed Nov 19 14:07:25 2014 kern.info kernel: [   12.620000] nf_conntrack version 0.5.0 (964 buckets, 3856 max)
Wed Nov 19 14:07:25 2014 kern.info kernel: [   12.670000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Wed Nov 19 14:07:25 2014 kern.info kernel: [   12.690000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Wed Nov 19 14:07:25 2014 kern.info kernel: [   12.710000] ohci-platform 101c1000.ohci: Generic Platform OHCI Controller
Wed Nov 19 14:07:25 2014 kern.info kernel: [   12.720000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
Wed Nov 19 14:07:25 2014 kern.info kernel: [   12.740000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   12.820000] usb usb2: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   12.820000] hub 2-0:1.0: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.info kernel: [   12.820000] hub 2-0:1.0: USB hub found
Wed Nov 19 14:07:25 2014 kern.info kernel: [   12.820000] hub 2-0:1.0: 1 port detected
Wed Nov 19 14:07:25 2014 kern.info kernel: [   12.850000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
Wed Nov 19 14:07:25 2014 kern.info kernel: [   12.870000] Backport generated by backports.git backports-20140320-37-g5c33da0
Wed Nov 19 14:07:25 2014 kern.info kernel: [   12.900000] ip_tables: (C) 2000-2006 Netfilter Core Team
Wed Nov 19 14:07:25 2014 kern.info kernel: [   12.970000] usbcore: registered new interface driver usbserial
Wed Nov 19 14:07:25 2014 kern.info kernel: [   12.990000] usbcore: registered new interface driver usbserial_generic
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.010000] usbserial: USB Serial support registered for generic
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.040000] xt_time: kernel timezone is -0000
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.080000] cfg80211: Calling CRDA to update world regulatory domain
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.090000] cfg80211: World regulatory domain updated:
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.100000] cfg80211:  DFS Master region: unset
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.110000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.130000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.150000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.160000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.180000] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.190000] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.210000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.230000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.240000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.300000] PPP generic driver version 2.4.2
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.320000] usb 2-1: new full-speed USB device number 2 using ohci-platform
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.330000] NET: Registered protocol family 24
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.370000] usbcore: registered new interface driver sierra
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.390000] usbserial: USB Serial support registered for Sierra USB modem
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.420000] usbcore: registered new interface driver option
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.430000] usbserial: USB Serial support registered for GSM modem (1-port)
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.550000] usb 2-1: not running at top speed; connect to a high speed hub
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   13.580000] usb 2-1: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   13.590000] usb-storage 2-1:1.0: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.590000] usb-storage 2-1:1.0: USB Mass Storage device detected
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   13.600000] option 2-1:1.0: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.600000] option 2-1:1.0: GSM modem (1-port) converter detected
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   13.630000] option1 ttyUSB0: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.630000] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   13.660000] usb-storage 2-1:1.1: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.660000] usb-storage 2-1:1.1: USB Mass Storage device detected
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   13.690000] usb-storage 2-1:1.2: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.690000] usb-storage 2-1:1.2: USB Mass Storage device detected
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   13.710000] usb-storage 2-1:1.3: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.710000] usb-storage 2-1:1.3: USB Mass Storage device detected
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   13.730000] option 2-1:1.3: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.730000] option 2-1:1.3: GSM modem (1-port) converter detected
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   13.750000] option1 ttyUSB1: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.750000] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   13.770000] usb-storage 2-1:1.4: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.770000] usb-storage 2-1:1.4: USB Mass Storage device detected
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   13.790000] option 2-1:1.4: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.790000] option 2-1:1.4: GSM modem (1-port) converter detected
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   13.810000] option1 ttyUSB2: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.810000] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   13.830000] usb-storage 2-1:1.5: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.830000] usb-storage 2-1:1.5: USB Mass Storage device detected
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.850000] scsi5 : usb-storage 2-1:1.5
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   13.870000] usb-storage 2-1:1.6: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.870000] usb-storage 2-1:1.6: USB Mass Storage device detected
Wed Nov 19 14:07:25 2014 kern.info kernel: [   13.890000] scsi6 : usb-storage 2-1:1.6
Wed Nov 19 14:07:25 2014 kern.notice kernel: [   14.860000] scsi 5:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Wed Nov 19 14:07:25 2014 kern.notice kernel: [   14.890000] scsi 6:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   14.920000] sd 5:0:0:0: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   14.920000] sd 6:0:0:0: no of_node; not parsing pinctrl DT
Wed Nov 19 14:07:25 2014 kern.notice kernel: [   14.960000] sd 6:0:0:0: [sda] Attached SCSI removable disk
Wed Nov 19 14:07:25 2014 kern.info kernel: [   15.110000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0500 detected
Wed Nov 19 14:07:25 2014 kern.info kernel: [   15.120000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
Wed Nov 19 14:07:25 2014 kern.debug kernel: [   15.140000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Wed Nov 19 14:07:27 2014 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Wed Nov 19 14:07:28 2014 user.err syslog: /dev/mtdblock5 is already mounted
Wed Nov 19 14:07:28 2014 user.emerg syslog: block: /dev/mtdblock5 is already mounted
Wed Nov 19 14:07:29 2014 authpriv.info dropbear[1150]: Not backgrounding
Wed Nov 19 14:07:29 2014 user.emerg syslog: setting up led power
Wed Nov 19 14:07:30 2014 user.emerg syslog: - init complete -
Wed Nov 19 14:07:30 2014 kern.info kernel: [   21.680000] device eth0.1 entered promiscuous mode
Wed Nov 19 14:07:30 2014 kern.info kernel: [   21.690000] device eth0 entered promiscuous mode
Wed Nov 19 14:07:30 2014 kern.info kernel: [   21.700000] br-lan: port 1(eth0.1) entered forwarding state
Wed Nov 19 14:07:30 2014 kern.info kernel: [   21.710000] br-lan: port 1(eth0.1) entered forwarding state
Wed Nov 19 14:07:30 2014 daemon.notice netifd: Interface 'lan' is enabled
Wed Nov 19 14:07:30 2014 daemon.notice netifd: Interface 'lan' is setting up now
Wed Nov 19 14:07:30 2014 daemon.notice netifd: Interface 'lan' is now up
Wed Nov 19 14:07:30 2014 daemon.notice netifd: Interface 'AERO' is setting up now
Wed Nov 19 14:07:30 2014 daemon.notice netifd: Interface 'loopback' is enabled
Wed Nov 19 14:07:30 2014 daemon.notice netifd: Interface 'loopback' is setting up now
Wed Nov 19 14:07:30 2014 daemon.notice netifd: Interface 'loopback' is now up
Wed Nov 19 14:07:30 2014 daemon.notice netifd: Interface 'wan' is enabled
Wed Nov 19 14:07:30 2014 daemon.notice netifd: Network device 'eth0' link is up
Wed Nov 19 14:07:30 2014 daemon.notice netifd: VLAN 'eth0.2' link is up
Wed Nov 19 14:07:30 2014 daemon.notice netifd: Interface 'wan' has link connectivity
Wed Nov 19 14:07:31 2014 daemon.notice netifd: wan (1269): udhcpc (v1.22.1) started
Wed Nov 19 14:07:31 2014 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Nov 19 14:07:31 2014 kern.info kernel: [   22.700000] cfg80211: Calling CRDA for country: PL
Wed Nov 19 14:07:31 2014 kern.info kernel: [   22.740000] cfg80211: Regulatory domain changed to country: PL
Wed Nov 19 14:07:31 2014 kern.info kernel: [   22.750000] cfg80211:  DFS Master region: ETSI
Wed Nov 19 14:07:31 2014 kern.info kernel: [   22.760000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Wed Nov 19 14:07:31 2014 kern.info kernel: [   22.770000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Wed Nov 19 14:07:31 2014 kern.info kernel: [   22.790000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Wed Nov 19 14:07:31 2014 kern.info kernel: [   22.810000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
Wed Nov 19 14:07:31 2014 kern.info kernel: [   22.820000] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
Wed Nov 19 14:07:31 2014 kern.info kernel: [   22.840000] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Wed Nov 19 14:07:31 2014 daemon.warn odhcpd[1095]: DHCPV6 SOLICIT IA_NA from 000100011bc3f94fbc5ff4dca1fd on br-lan: ok fd88:f654:71c8::863/128
Wed Nov 19 14:07:31 2014 daemon.notice netifd: wan (1269): Sending discover...
Wed Nov 19 14:07:32 2014 kern.info kernel: [   23.710000] br-lan: port 1(eth0.1) entered forwarding state
Wed Nov 19 14:07:32 2014 kern.err kernel: [   23.880000] option1 ttyUSB0: option_instat_callback: error -2
Wed Nov 19 14:07:32 2014 daemon.warn odhcpd[1095]: DHCPV6 SOLICIT IA_NA from 000100011bc3f94fbc5ff4dca1fd on br-lan: ok fd88:f654:71c8::863/128
Wed Nov 19 14:07:33 2014 daemon.notice netifd: AERO (1223): Trying to set mode
Wed Nov 19 14:07:33 2014 kern.info kernel: [   24.660000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Nov 19 14:07:33 2014 kern.info kernel: [   24.670000] device wlan0 entered promiscuous mode
Wed Nov 19 14:07:33 2014 kern.info kernel: [   24.910000] br-lan: port 2(wlan0) entered forwarding state
Wed Nov 19 14:07:33 2014 kern.info kernel: [   24.920000] br-lan: port 2(wlan0) entered forwarding state
Wed Nov 19 14:07:33 2014 kern.info kernel: [   24.930000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Wed Nov 19 14:07:33 2014 daemon.warn odhcpd[1095]: DHCPV6 REQUEST IA_NA from 000100011bc3f94fbc5ff4dca1fd on br-lan: ok fd88:f654:71c8::863/128
Wed Nov 19 14:07:33 2014 daemon.notice netifd: Network device 'wlan0' link is up
Wed Nov 19 14:07:34 2014 kern.err kernel: [   25.170000] option1 ttyUSB0: option_instat_callback: error -2
Wed Nov 19 14:07:34 2014 daemon.notice pppd[1401]: pppd 2.4.7 started by root, uid 0
Wed Nov 19 14:07:34 2014 daemon.notice netifd: wan (1269): Sending discover...
Wed Nov 19 14:07:35 2014 daemon.info dnsmasq[1414]: started, version 2.71 cachesize 150
Wed Nov 19 14:07:35 2014 daemon.info dnsmasq[1414]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Wed Nov 19 14:07:35 2014 daemon.info dnsmasq-dhcp[1414]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Wed Nov 19 14:07:35 2014 daemon.info dnsmasq[1414]: using local addresses only for domain lan
Wed Nov 19 14:07:35 2014 daemon.warn dnsmasq[1414]: no servers found in /tmp/resolv.conf.auto, will retry
Wed Nov 19 14:07:35 2014 daemon.info dnsmasq[1414]: read /etc/hosts - 1 addresses
Wed Nov 19 14:07:35 2014 daemon.info dnsmasq[1414]: read /tmp/hosts/dhcp - 1 addresses
Wed Nov 19 14:07:35 2014 daemon.info dnsmasq[1414]: read /tmp/hosts/odhcpd - 1 addresses
Wed Nov 19 14:07:35 2014 daemon.info dnsmasq-dhcp[1414]: read /etc/ethers - 0 addresses
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: abort on (BUSY)
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: abort on (NO CARRIER)
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: abort on (ERROR)
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: report (CONNECT)
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: timeout set to 10 seconds
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: send (AT&F^M)
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: expect (OK)
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: AT&F^M^M
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: OK
Wed Nov 19 14:07:35 2014 local2.info chat[1433]:  -- got it
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: send (ATE1^M)
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: expect (OK)
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: ^M
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: ATE1^M^M
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: OK
Wed Nov 19 14:07:35 2014 local2.info chat[1433]:  -- got it
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: send (AT+CGDCONT=1,"IP","darmowy"^M)
Wed Nov 19 14:07:35 2014 kern.info kernel: [   26.920000] br-lan: port 2(wlan0) entered forwarding state
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: timeout set to 30 seconds
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: expect (OK)
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: ^M
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: AT+CGDCONT=1,"IP","darmowy"^M^M
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: OK
Wed Nov 19 14:07:35 2014 local2.info chat[1433]:  -- got it
Wed Nov 19 14:07:35 2014 local2.info chat[1433]: send (ATD*99***1#^M)
Wed Nov 19 14:07:36 2014 local2.info chat[1433]: expect (CONNECT)
Wed Nov 19 14:07:36 2014 local2.info chat[1433]: ^M
Wed Nov 19 14:07:36 2014 local2.info chat[1433]: ATD*99***1#^M^M
Wed Nov 19 14:07:36 2014 local2.info chat[1433]: CONNECT
Wed Nov 19 14:07:36 2014 local2.info chat[1433]:  -- got it
Wed Nov 19 14:07:36 2014 local2.info chat[1433]: send ( ^M)
Wed Nov 19 14:07:36 2014 daemon.info pppd[1401]: Serial connection established.
Wed Nov 19 14:07:36 2014 daemon.info pppd[1401]: Using interface 3g-AERO
Wed Nov 19 14:07:36 2014 daemon.notice pppd[1401]: Connect: 3g-AERO <--> /dev/ttyUSB0
Wed Nov 19 14:07:37 2014 daemon.notice netifd: wan (1269): Sending discover...
Wed Nov 19 14:07:40 2014 authpriv.info dropbear[1488]: Child connection from 192.168.1.215:64898
Wed Nov 19 14:07:41 2014 daemon.info dnsmasq-dhcp[1414]: DHCPREQUEST(br-lan) 192.168.1.215 bc:5f:f4:dc:a1:fd
Wed Nov 19 14:07:41 2014 daemon.info dnsmasq-dhcp[1414]: DHCPACK(br-lan) 192.168.1.215 bc:5f:f4:dc:a1:fd WIN-GUKM9L8T9B4
Wed Nov 19 14:07:41 2014 daemon.warn pppd[1401]: Could not determine remote IP address: defaulting to 10.64.64.64
Wed Nov 19 14:07:41 2014 daemon.notice pppd[1401]: local  IP address 78.30.108.69
Wed Nov 19 14:07:41 2014 daemon.notice pppd[1401]: remote IP address 10.64.64.64
Wed Nov 19 14:07:41 2014 daemon.notice pppd[1401]: primary   DNS address 193.41.112.14
Wed Nov 19 14:07:41 2014 daemon.notice pppd[1401]: secondary DNS address 193.41.112.18
Wed Nov 19 14:07:41 2014 daemon.notice netifd: Network device '3g-AERO' link is up
Wed Nov 19 14:07:42 2014 daemon.notice netifd: Interface 'AERO' is now up
Wed Nov 19 14:07:42 2014 user.notice firewall: Reloading firewall due to ifup of AERO (3g-AERO)
Wed Nov 19 14:07:47 2014 authpriv.notice dropbear[1488]: Password auth succeeded for 'root' from 192.168.1.215:64898
Wed Nov 19 14:07:48 2014 daemon.info dnsmasq[1414]: reading /tmp/resolv.conf.auto
Wed Nov 19 14:07:48 2014 daemon.info dnsmasq[1414]: using local addresses only for domain lan
Wed Nov 19 14:07:48 2014 daemon.info dnsmasq[1414]: using nameserver 193.41.112.14#53
Wed Nov 19 14:07:48 2014 daemon.info dnsmasq[1414]: using nameserver 193.41.112.18#53
Thu Nov 20 12:06:34 2014 daemon.info pppd[1401]: System time change detected.
Thu Nov 20 12:06:48 2014 daemon.warn pppd[1401]: IPV6CP: timeout sending Config-Requests

Mam skonfigurowane połączenie z AREO2 stąd taka informacja w logach

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,863

Odp: NEXX WT3020H

I brakuje pierwszych 4 sekund smile

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez neonbloow

  • Zarejestrowany: 2010-08-06
  • Posty: 123

Odp: NEXX WT3020H

nie wiem czemu nie wylistował, po pracy jak dotrę do domu, to zrzucę do pliku.

8 Odpowiedź przez neonbloow

  • Zarejestrowany: 2010-08-06
  • Posty: 123

Odp: NEXX WT3020H

Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.170000] Switching to clocksource MIPS
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.180000] NET: Registered protocol family 2
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.190000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.200000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.210000] TCP: Hash tables configured (established 512 bind 512)
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.230000] TCP: reno registered
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.230000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.240000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.260000] NET: Registered protocol family 1
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.270000] rt-timer 10000100.timer: maximum frequncy is 2441Hz
Thu Nov 20 12:10:54 2014 kern.debug kernel: [    0.280000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.290000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.310000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.330000] msgmni has been set to 120
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.330000] io scheduler noop registered
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.340000] io scheduler deadline registered (default)
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.350000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Nov 20 12:10:54 2014 kern.debug kernel: [    0.370000] serial8250 serial8250: no of_node; not parsing pinctrl DT
Thu Nov 20 12:10:54 2014 kern.debug kernel: [    0.370000] pinctrl core: add 1 pinmux maps
Thu Nov 20 12:10:54 2014 kern.debug kernel: [    0.370000] rt2880-pinmux pinctrl.1: found group selector 3 for uartlite
Thu Nov 20 12:10:54 2014 kern.debug kernel: [    0.370000] rt2880-pinmux pinctrl.1: request pin 15 (io15) for 10000c00.uartlite
Thu Nov 20 12:10:54 2014 kern.debug kernel: [    0.370000] rt2880-pinmux pinctrl.1: request pin 16 (io16) for 10000c00.uartlite
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.370000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20) is a 16550A
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.390000] console [ttyS0] enabled, bootconsole disabled
Thu Nov 20 12:10:54 2014 kern.debug kernel: [    0.410000] pinctrl core: add 1 pinmux maps
Thu Nov 20 12:10:54 2014 kern.debug kernel: [    0.410000] rt2880-pinmux pinctrl.1: found group selector 2 for spi
Thu Nov 20 12:10:54 2014 kern.debug kernel: [    0.410000] rt2880-pinmux pinctrl.1: request pin 3 (io3) for 10000b00.spi
Thu Nov 20 12:10:54 2014 kern.debug kernel: [    0.410000] rt2880-pinmux pinctrl.1: request pin 4 (io4) for 10000b00.spi
Thu Nov 20 12:10:54 2014 kern.debug kernel: [    0.410000] rt2880-pinmux pinctrl.1: request pin 5 (io5) for 10000b00.spi
Thu Nov 20 12:10:54 2014 kern.debug kernel: [    0.410000] rt2880-pinmux pinctrl.1: request pin 6 (io6) for 10000b00.spi
Thu Nov 20 12:10:54 2014 kern.warn kernel: [    0.410000] m25p80 spi32766.0: found en25q64, expected w25q64
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.430000] m25p80 spi32766.0: en25q64 (8192 Kbytes)
Thu Nov 20 12:10:54 2014 kern.notice kernel: [    0.440000] 4 ofpart partitions found on MTD device spi32766.0
Thu Nov 20 12:10:54 2014 kern.notice kernel: [    0.450000] Creating 4 MTD partitions on "spi32766.0":
Thu Nov 20 12:10:54 2014 kern.notice kernel: [    0.460000] 0x000000000000-0x000000030000 : "u-boot"
Thu Nov 20 12:10:54 2014 kern.notice kernel: [    0.470000] 0x000000030000-0x000000040000 : "u-boot-env"
Thu Nov 20 12:10:54 2014 kern.notice kernel: [    0.480000] 0x000000040000-0x000000050000 : "factory"
Thu Nov 20 12:10:54 2014 kern.notice kernel: [    0.490000] 0x000000050000-0x000000800000 : "firmware"
Thu Nov 20 12:10:54 2014 kern.notice kernel: [    0.500000] 0x000000158079-0x000000800000 : "rootfs"
Thu Nov 20 12:10:54 2014 kern.warn kernel: [    0.510000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Thu Nov 20 12:10:54 2014 kern.notice kernel: [    0.540000] mtd: device 4 (rootfs) set to be root filesystem
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.550000] mtd: partition "rootfs_data" created automatically, ofs=0x3b0000, len=0x450000
Thu Nov 20 12:10:54 2014 kern.notice kernel: [    0.570000] 0x0000003b0000-0x000000800000 : "rootfs_data"
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.580000] ralink_soc_eth 10100000.ethernet: loaded mt7530 driver
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.600000] eth0: done loading
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.600000] rt3xxx-usbphy usbphy.3: loaded
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.610000] rt2880_wdt 10000120.watchdog: Initialized
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.620000] TCP: cubic registered
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.630000] NET: Registered protocol family 17
Thu Nov 20 12:10:54 2014 kern.notice kernel: [    0.640000] Bridge firewalling registered
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.650000] 8021q: 802.1Q VLAN Support v1.8
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.670000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Thu Nov 20 12:10:54 2014 kern.info kernel: [    0.680000] Freeing unused kernel memory: 200K (802ee000 - 80320000)
Thu Nov 20 12:10:54 2014 kern.info kernel: [    4.840000] usbcore: registered new interface driver usbfs
Thu Nov 20 12:10:54 2014 kern.info kernel: [    4.850000] usbcore: registered new interface driver hub
Thu Nov 20 12:10:54 2014 kern.info kernel: [    4.870000] usbcore: registered new device driver usb
Thu Nov 20 12:10:54 2014 kern.debug kernel: [    4.910000] rt2880-pinmux pinctrl.1: request pin 1 (io1) for pio:1
Thu Nov 20 12:10:54 2014 kern.notice kernel: [    4.910000] SCSI subsystem initialized
Thu Nov 20 12:10:54 2014 kern.info kernel: [    4.930000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Nov 20 12:10:54 2014 kern.info kernel: [    4.940000] ehci-platform: EHCI generic platform driver
Thu Nov 20 12:10:54 2014 kern.info kernel: [    5.150000] rt3xxx-usbphy usbphy.3: remote usb device wakeup disabled
Thu Nov 20 12:10:54 2014 kern.info kernel: [    5.170000] rt3xxx-usbphy usbphy.3: UTMI 16bit 30MHz
Thu Nov 20 12:10:54 2014 kern.info kernel: [    5.180000] ehci-platform 101c0000.ehci: EHCI Host Controller
Thu Nov 20 12:10:54 2014 kern.info kernel: [    5.190000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
Thu Nov 20 12:10:54 2014 kern.info kernel: [    5.200000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
Thu Nov 20 12:10:54 2014 kern.info kernel: [    5.240000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
Thu Nov 20 12:10:54 2014 kern.debug kernel: [    5.250000] usb usb1: no of_node; not parsing pinctrl DT
Thu Nov 20 12:10:54 2014 kern.debug kernel: [    5.250000] hub 1-0:1.0: no of_node; not parsing pinctrl DT
Thu Nov 20 12:10:54 2014 kern.info kernel: [    5.250000] hub 1-0:1.0: USB hub found
Thu Nov 20 12:10:54 2014 kern.info kernel: [    5.260000] hub 1-0:1.0: 1 port detected
Thu Nov 20 12:10:54 2014 kern.warn kernel: [    5.270000] leds-gpio gpio-leds.5: pins are not configured from the driver
Thu Nov 20 12:10:54 2014 kern.debug kernel: [    5.280000] rt2880-pinmux pinctrl.1: request pin 72 (io72) for pio:72
Thu Nov 20 12:10:54 2014 kern.info kernel: [    5.290000] usbcore: registered new interface driver usb-storage
Thu Nov 20 12:10:54 2014 kern.notice kernel: [    8.610000] jffs2: notice: (319) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 13 of xref (0 dead, 5 orphan) found.
Thu Nov 20 12:10:54 2014 kern.notice kernel: [    8.930000] jffs2: notice: (316) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 13 of xref (0 dead, 5 orphan) found.
Thu Nov 20 12:10:54 2014 kern.info kernel: [   11.530000] NET: Registered protocol family 10
Thu Nov 20 12:10:54 2014 kern.info kernel: [   11.600000] nf_conntrack version 0.5.0 (964 buckets, 3856 max)
Thu Nov 20 12:10:54 2014 kern.info kernel: [   11.620000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Nov 20 12:10:54 2014 kern.info kernel: [   11.660000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Thu Nov 20 12:10:54 2014 kern.info kernel: [   11.670000] ohci-platform 101c1000.ohci: Generic Platform OHCI Controller
Thu Nov 20 12:10:54 2014 kern.info kernel: [   11.680000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
Thu Nov 20 12:10:54 2014 kern.info kernel: [   11.700000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
Thu Nov 20 12:10:54 2014 kern.debug kernel: [   11.780000] usb usb2: no of_node; not parsing pinctrl DT
Thu Nov 20 12:10:54 2014 kern.debug kernel: [   11.780000] hub 2-0:1.0: no of_node; not parsing pinctrl DT
Thu Nov 20 12:10:54 2014 kern.info kernel: [   11.780000] hub 2-0:1.0: USB hub found
Thu Nov 20 12:10:54 2014 kern.info kernel: [   11.780000] hub 2-0:1.0: 1 port detected
Thu Nov 20 12:10:54 2014 kern.info kernel: [   11.870000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
Thu Nov 20 12:10:54 2014 kern.info kernel: [   11.890000] Backport generated by backports.git backports-20140320-37-g5c33da0
Thu Nov 20 12:10:54 2014 kern.info kernel: [   11.930000] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Nov 20 12:10:54 2014 kern.info kernel: [   11.990000] usbcore: registered new interface driver usbserial
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.010000] usbcore: registered new interface driver usbserial_generic
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.030000] usbserial: USB Serial support registered for generic
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.060000] xt_time: kernel timezone is -0000
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.100000] cfg80211: Calling CRDA to update world regulatory domain
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.110000] cfg80211: World regulatory domain updated:
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.120000] cfg80211:  DFS Master region: unset
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.130000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.150000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.170000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.180000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.200000] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.210000] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.230000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.250000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.260000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.340000] PPP generic driver version 2.4.2
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.360000] NET: Registered protocol family 24
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.400000] usbcore: registered new interface driver sierra
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.430000] usbserial: USB Serial support registered for Sierra USB modem
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.480000] usbcore: registered new interface driver option
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.500000] usbserial: USB Serial support registered for GSM modem (1-port)
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.650000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0500 detected
Thu Nov 20 12:10:54 2014 kern.info kernel: [   12.660000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
Thu Nov 20 12:10:54 2014 kern.debug kernel: [   12.690000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Nov 20 12:10:56 2014 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Thu Nov 20 12:10:56 2014 user.err syslog: /dev/mtdblock5 is already mounted
Thu Nov 20 12:10:56 2014 user.emerg syslog: block: /dev/mtdblock5 is already mounted
Thu Nov 20 12:10:57 2014 authpriv.info dropbear[962]: Not backgrounding
Thu Nov 20 12:10:58 2014 user.emerg syslog: setting up led power
Thu Nov 20 12:10:59 2014 kern.info kernel: [   19.180000] device eth0.1 entered promiscuous mode
Thu Nov 20 12:10:59 2014 kern.info kernel: [   19.190000] device eth0 entered promiscuous mode
Thu Nov 20 12:10:59 2014 kern.info kernel: [   19.200000] br-lan: port 1(eth0.1) entered forwarding state
Thu Nov 20 12:10:59 2014 kern.info kernel: [   19.210000] br-lan: port 1(eth0.1) entered forwarding state
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Interface 'lan' is enabled
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Interface 'lan' is setting up now
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Interface 'lan' is now up
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Interface 'AERO' is setting up now
Thu Nov 20 12:10:59 2014 user.emerg syslog: - init complete -
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Interface 'loopback' is enabled
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Interface 'loopback' is now up
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Interface 'wan' is enabled
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Network device 'eth0' link is up
Thu Nov 20 12:10:59 2014 daemon.notice netifd: VLAN 'eth0.2' link is up
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Interface 'wan' has link connectivity
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Interface 'wan' is setting up now
Thu Nov 20 12:10:59 2014 daemon.notice netifd: VLAN 'eth0.1' link is up
Thu Nov 20 12:10:59 2014 daemon.notice netifd: VLAN 'eth0.1' link is down
Thu Nov 20 12:10:59 2014 daemon.notice netifd: VLAN 'eth0.1' link is up
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Bridge 'br-lan' link is up
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Network device 'lo' link is up
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Nov 20 12:10:59 2014 daemon.notice netifd: VLAN 'eth0.2' link is down
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Interface 'wan' has link connectivity loss
Thu Nov 20 12:10:59 2014 daemon.notice netifd: VLAN 'eth0.2' link is up
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Interface 'wan' has link connectivity
Thu Nov 20 12:10:59 2014 daemon.notice netifd: Interface 'AERO' is now down
Thu Nov 20 12:10:59 2014 daemon.notice netifd: wan (1089): udhcpc (v1.22.1) started
Thu Nov 20 12:11:00 2014 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Nov 20 12:11:00 2014 kern.info kernel: [   20.340000] cfg80211: Calling CRDA for country: PL
Thu Nov 20 12:11:00 2014 daemon.notice netifd: wan (1089): Sending discover...
Thu Nov 20 12:11:00 2014 kern.info kernel: [   20.360000] cfg80211: Regulatory domain changed to country: PL
Thu Nov 20 12:11:00 2014 kern.info kernel: [   20.370000] cfg80211:  DFS Master region: ETSI
Thu Nov 20 12:11:00 2014 kern.info kernel: [   20.380000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Thu Nov 20 12:11:00 2014 kern.info kernel: [   20.400000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Thu Nov 20 12:11:00 2014 kern.info kernel: [   20.410000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Thu Nov 20 12:11:00 2014 kern.info kernel: [   20.430000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
Thu Nov 20 12:11:00 2014 kern.info kernel: [   20.450000] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
Thu Nov 20 12:11:00 2014 kern.info kernel: [   20.460000] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Thu Nov 20 12:11:01 2014 kern.info kernel: [   21.210000] br-lan: port 1(eth0.1) entered forwarding state
Thu Nov 20 12:11:01 2014 kern.info kernel: [   22.050000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Thu Nov 20 12:11:01 2014 kern.info kernel: [   22.060000] device wlan0 entered promiscuous mode
Thu Nov 20 12:11:02 2014 kern.info kernel: [   22.290000] br-lan: port 2(wlan0) entered forwarding state
Thu Nov 20 12:11:02 2014 kern.info kernel: [   22.300000] br-lan: port 2(wlan0) entered forwarding state
Thu Nov 20 12:11:02 2014 kern.info kernel: [   22.310000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Thu Nov 20 12:11:02 2014 daemon.notice netifd: Network device 'wlan0' link is up
Thu Nov 20 12:11:03 2014 daemon.notice netifd: wan (1089): Sending discover...
Thu Nov 20 12:11:03 2014 user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override
Thu Nov 20 12:11:03 2014 daemon.info dnsmasq[1211]: started, version 2.71 cachesize 150
Thu Nov 20 12:11:03 2014 daemon.info dnsmasq[1211]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Thu Nov 20 12:11:03 2014 daemon.info dnsmasq[1211]: using local addresses only for domain lan
Thu Nov 20 12:11:03 2014 daemon.warn dnsmasq[1211]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Nov 20 12:11:03 2014 daemon.info dnsmasq[1211]: read /etc/hosts - 1 addresses
Thu Nov 20 12:11:03 2014 daemon.info dnsmasq[1211]: read /tmp/hosts/dhcp - 1 addresses
Thu Nov 20 12:11:04 2014 kern.info kernel: [   24.300000] br-lan: port 2(wlan0) entered forwarding state
Thu Nov 20 12:11:06 2014 daemon.notice netifd: wan (1089): Sending discover...
Thu Nov 20 12:11:09 2014 kern.info kernel: [   29.630000] usb 1-1: new high-speed USB device number 89 using ehci-platform
Thu Nov 20 12:11:29 2014 authpriv.info dropbear[1261]: Child connection from 192.168.1.10:61642

9 Odpowiedź przez Gruberek

  • Skąd: Piotrków Tryb.
  • Zarejestrowany: 2013-08-04
  • Posty: 712

Odp: NEXX WT3020H

Odkopię temat smile

Testował już ktoś ten router? Jak z wydajnością w porównaniu do minirouterów tp-link'a? Czy przy podpięciu do mocniejszego zasilacza jest w stanie uciągnąć modem LTE? Czy openwrt działa stabilnie na tym routerze?

Home: ZyXEL NBG6817 (OpenWrt)
NAS: HP ProLiant MicroServer Gen8 E3-1265L V2, 16 GB (PVE)

Gruberek's Strona

10 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,863

Odp: NEXX WT3020H

OpenWrt działa bez problemu.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

11 Odpowiedź przez Gruberek

  • Skąd: Piotrków Tryb.
  • Zarejestrowany: 2013-08-04
  • Posty: 712

Odp: NEXX WT3020H

Router aktualnie można kupić za $13.59. Znajdzie się coś lepszego w podobnej kasie?

Home: ZyXEL NBG6817 (OpenWrt)
NAS: HP ProLiant MicroServer Gen8 E3-1265L V2, 16 GB (PVE)

Gruberek's Strona

12 Odpowiedź przez pepe2k

  • pepe2k
  • pepe2k
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-29
  • Posty: 5,028

Odp: NEXX WT3020H

Gruberek napisał/a:

Router aktualnie można kupić za $13.59. Znajdzie się coś lepszego w podobnej kasie?

W podobnym rozmiarze? Nope.

13 Odpowiedź przez secam7

  • secam7
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-02-19
  • Posty: 431

Odp: NEXX WT3020H

Mam, używam, chwalę sobie, za te pieniądze IMHO nie ma nic lepszego.
Wydajność na poziomie 500MHz tp-linków.
Mam dobry sygnał, ale e398 i e3272 (w trybie ncm) działają bez problemów.
Używam trunku CC, nowy sterownik ncm w 3.18 jest naprawdę niezły.
Swoje robi też 64MB RAM i 8MB flash, podobno łatwo wymienialne na 16MB.
Jak ktoś nie potrzebuje portów 1Gb i radia 5GHz, to polecam!

14 Odpowiedź przez Gruberek

  • Skąd: Piotrków Tryb.
  • Zarejestrowany: 2013-08-04
  • Posty: 712

Odp: NEXX WT3020H

Ja chcę wifi w ciężarówce sobie zrobić więc 5GHz mi nie potrzebne smile Skoro tak go wszyscy zachwalają to kupuję smile

Home: ZyXEL NBG6817 (OpenWrt)
NAS: HP ProLiant MicroServer Gen8 E3-1265L V2, 16 GB (PVE)

Gruberek's Strona

15 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,863

Odp: NEXX WT3020H

Tylko - za 15-16 będzie bez usb, więc uważaj co kupujesz.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

16 Odpowiedź przez Gruberek (edytowany przez Gruberek 2015-04-16 17:00:26)

  • Skąd: Piotrków Tryb.
  • Zarejestrowany: 2013-08-04
  • Posty: 712

Odp: NEXX WT3020H

Na pewno jest z USB. Wersja H lub F w tej samej cenie:

http://www.aliexpress.com/item/Smallest … 34334.html
http://www.aliexpress.com/item/Smallest … 72692.html

EDIT:
Żeby się upewnić napisałem do sprzedawcy i mam potwierdzenie, że jest to wersja z 8 MB flash i portem USB. Jutro mam dostać dokładną specyfikację i instrukcję na maila.

Home: ZyXEL NBG6817 (OpenWrt)
NAS: HP ProLiant MicroServer Gen8 E3-1265L V2, 16 GB (PVE)

Gruberek's Strona

17 Odpowiedź przez secam7

  • secam7
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-02-19
  • Posty: 431

Odp: NEXX WT3020H

To taki mój nowy rekord, po wifii i na nexx wt3020, szkoda że router ten niedostępny jest za PLN. sad

http://www.speedtest.net/result/4315732811.png

18 Odpowiedź przez Gruberek

  • Skąd: Piotrków Tryb.
  • Zarejestrowany: 2013-08-04
  • Posty: 712

Odp: NEXX WT3020H

W końcu dotarł do mnie Nexx WT3020F. Pierwsze testy z modemem e3372 wypadły całkiem nieźle biorąc pod uwagę fakt, że działał na ładowarce od telefonu, która daje tylko 0,85A i bez aktywnego HUB'a.

http://www.speedtest.net/result/4373076553.png

Home: ZyXEL NBG6817 (OpenWrt)
NAS: HP ProLiant MicroServer Gen8 E3-1265L V2, 16 GB (PVE)

Gruberek's Strona

19 Odpowiedź przez simono

  • simono
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-08-10
  • Posty: 596

Odp: NEXX WT3020H

Ile jest wolne flash po wgraniu openwrt?

20 Odpowiedź przez Gruberek

  • Skąd: Piotrków Tryb.
  • Zarejestrowany: 2013-08-04
  • Posty: 712

Odp: NEXX WT3020H

root@OpenWrt:~# df -h
Filesystem                Size      Used Available Use% Mounted on
rootfs                    1.6M    412.0K      1.2M  25% /

BB z luci i zainstalowanym nano.

Home: ZyXEL NBG6817 (OpenWrt)
NAS: HP ProLiant MicroServer Gen8 E3-1265L V2, 16 GB (PVE)

Gruberek's Strona

21 Odpowiedź przez andrut

  • andrut
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-05-11
  • Posty: 290

Odp: NEXX WT3020H

Ten router to majstersztyk, przestawiłem wszystkie sieci z różnych staroci (często bez n-ki).
Dobra ładowarka (nie siejąca zakłócająceniami!!!) to podstawa do jego bezawaryjnej pracy.
Jeśli macie z nim problemy, to na pewno jest wina niefiltrowanego zasilania. Empirycznie potwierdzone.

prognoza pogody dla Warszawy

22 Odpowiedź przez JarekMk

  • Zarejestrowany: 2014-11-09
  • Posty: 328

Odp: NEXX WT3020H

Gruberek napisał/a:

Na pewno jest z USB. Wersja H lub F w tej samej cenie:

http://www.aliexpress.com/item/Smallest … 34334.html
http://www.aliexpress.com/item/Smallest … 72692.html

EDIT:
Żeby się upewnić napisałem do sprzedawcy i mam potwierdzenie, że jest to wersja z 8 MB flash i portem USB. Jutro mam dostać dokładną specyfikację i instrukcję na maila.

Która wersja lepsza: F czy H?

Nigdy z Ali nie zamawiałem - nie ma problemu? Na skrytkę pocztową też dojdzie?

JarekMk's Strona

23 Odpowiedź przez Gruberek

  • Skąd: Piotrków Tryb.
  • Zarejestrowany: 2013-08-04
  • Posty: 712

Odp: NEXX WT3020H

Nie różnią się niczym z wyjątkiem softu. Mam wersję F, a wczoraj zamówiłem trochę większą ilość w wersji H. Jak zamierzasz wgrać openwrt to bierz ten, który jest tańszy. Na Ali zamawiałem już kilka razy. Najdłużej czekałem właśnie na ten router, bo ponad 3 tygodnie. Co do skrytki pocztowej to się nie wypowiem, bo nie korzystam.

Home: ZyXEL NBG6817 (OpenWrt)
NAS: HP ProLiant MicroServer Gen8 E3-1265L V2, 16 GB (PVE)

Gruberek's Strona

24 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,863

Odp: NEXX WT3020H

A opis co jest czym jest tu: http://wiki.openwrt.org/toh/nexx/wt3020

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

25 Odpowiedź przez Gruberek

  • Skąd: Piotrków Tryb.
  • Zarejestrowany: 2013-08-04
  • Posty: 712

Odp: NEXX WT3020H

Na wiki podają, że siedzą w nich W25Q64BV, a w moim ( wersja F ) jest EN25Q64.

PS. Jak by ktoś potrzebował wsad z wersji F to pisać.

Home: ZyXEL NBG6817 (OpenWrt)
NAS: HP ProLiant MicroServer Gen8 E3-1265L V2, 16 GB (PVE)

Gruberek's Strona