root@OpenWrt:~# mount
tmpfs on / type tmpfs (rw,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
tmpfs on /dev type tmpfs (rw,nosuid,noexec,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,noatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
bpffs on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,noatime,mode=700)
pstore on /sys/fs/pstore type pstore (rw,noatime)

;   89.288179] p$$ ▒,   hk|▒xJ▒F▒֡▒1▒
RP▒     ▒Q
          ▒ >▒▒▒ AH!4u▒▒▒(▒▒%+!e>J▒▒r;▒/▒uy▒▒▒▒▒▒▒▒;▒▒~▒▒▒▒o▒▒▒▒▒▒▒▒v▒▒▒▒▒W▒▒▒▒▒▒▒▒▒▒_▒▒▒▒▒k▒▒▒▒m▒▒▒▒▒▒▒▒▒▒▒▒_▒▒w▒;▒▒▒▒▒▒▒▒▒▒▒▒▒▒?▒w▒▒oW▒▒▒▒▒▒▒▒޿▒▒▒▒▒▒n▒▒▒▒<▒▒߶▒}?▒▒▒▒▒▒▒▒Ϻ▒▒o▒▒▒▒▒▒翟▒▒▒▒▒▒▒▒▒޶▒▒▒▒▒▒▒▒\o▒▒▒▒▒▒▒▒▒▒▒▒▒▒;▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒{▒▒▒ɽ▒Y▒▒<▒▒▒▒▒c▒۶▒▒▒+▒▒▒▒▒w▒▒▒▒▒▒▒▒g▒▒޿7▒▒▒▒▒▒▒▒▒▒▒m▒▒▒▒▒▒▒▒▒▒-▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒۽▒m▒▒▒▒▒▒▒~>▒▒▒▒o▒▒▒▒▒▒▒▒▒▒:▒g▒w▒▒▒▒▒^▒▒▒<▒▒▒▒}▒{▒?▒▒▒▒▒▒▒▒▒_▒▒?▒▒▒ܸ▒{_~▒▒▒▒▒▒▒▒▒▒▒▒▒?▒▒▒뿿▒~▒w▒▒߿▒▒▒▒{▒▒▒▒▒▒▒▒}▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒{▒▒▒▒▒▒▒▒▒▒▒▒▒
F0: 102B 0000
FA: 1040 0000
FA: 1040 0000 [0200]
F9: 103F 0000
F3: 1001 0000 [0200]
F3: 1001 0000
F6: 300C 0028
F5: 0000 0000
V0: 0000 0000 [0001]
00: 0000 0000
BP: 2400 0041 [0000]
G0: 1190 0000
EC: 0000 0000 [3000]
T0: 0000 026A [010F]
Jump to BL

NOTICE:  BL2: v2.10.0   (release):OpenWrt v2024.01.17~bacca82a-3 (mt7986-sdmmc-ddr4)
NOTICE:  BL2: Built : 06:54:40, Nov 13 2024
NOTICE:  WDT: Cold boot
NOTICE:  WDT: disabled
NOTICE:  CPU: MT7986 (2000MHz)
NOTICE:  EMI: Using DDR4 settings
NOTICE:  EMI: Detected DRAM size: 2048MB
NOTICE:  EMI: complex R/W mem test passed
NOTICE:  BL2: Booting BL31
NOTICE:  BL31: v2.10.0  (release):OpenWrt v2024.01.17~bacca82a-3 (mt7986-sdmmc-ddr4)
NOTICE:  BL31: Built : 06:54:40, Nov 13 2024


U-Boot 2024.10-OpenWrt-r28019-e39f5d4b36 (Nov 13 2024 - 06:54:40 +0000)

CPU:   MediaTek MT7986
Model: BananaPi BPi-R3
DRAM:  2 GiB
Core:  54 devices, 24 uclasses, devicetree: embed
jedec_spi_nor spi_nor@0: unrecognized JEDEC id bytes: ff, ef, aa
MMC:   mmc@11230000: 0
Loading Environment from MMC... Reading from redundant MMC(0)... OK
In:    serial@11002000
Out:   serial@11002000
Err:   serial@11002000
Loading Environment from MMC... Reading from redundant MMC(0)... OK
Net:   eth0: ethernet@15100000

        ( ( ( OpenWrt ) ) )  [SD card]       U-Boot 2024.10-OpenWrt-r28019-e39f5d4b36 (Nov 13 2024 - 06:54:40 +0000)

      1. Run default boot command.
      2. Boot system via TFTP.
      3. Boot production system from SD card.
      4. Boot recovery system from SD card.
      5. Load production system via TFTP then write to SD card.
      6. Load recovery system via TFTP then write to SD card.
      7. Install bootloader, recovery and production to NOR.
      8. Install bootloader, recovery and production to NAND.
      9. Reboot.
      a. Reset all settings to factory defaults.
      0. Exit


  Press UP/DOWN to move, ENTER to select, ESC to quit
spi-nand: spi_nand spi_nand@1: Winbond SPI NAND was found.
spi-nand: spi_nand spi_nand@1: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
jedec_spi_nor spi_nor@0: unrecognized JEDEC id bytes: 00, ef, aa
'spi-nand0' is now active device
* spi-nand0
  - device: spi_nand@1
  - parent: spi@1100a000
  - driver: spi_nand
  - type: NAND flash
  - block size:        0x20000 bytes
  - page size:         0x800 bytes
  - OOB size:          64 bytes
  - OOB available:     24 bytes
  - 0x000000000000-0x000008000000 : "spi-nand0"
          - 0x000000000000-0x000000200000 : "bl2"
          - 0x000000200000-0x000008000000 : "ubi"

MMC read: dev # 0, block # 131072, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 131072, count 27592 ... 27592 blocks read: OK
## Loading kernel from FIT Image at 46000000 ...
   Using 'config-mt7986a-bananapi-bpi-r3' configuration
   Trying 'kernel-1' kernel subimage
     Description:  ARM64 OpenWrt Linux-6.6.60
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x46001000
     Data Size:    5627455 Bytes = 5.4 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x44000000
     Entry Point:  0x44000000
     Hash algo:    crc32
     Hash value:   7498ad4b
     Hash algo:    sha1
     Hash value:   27fa70c7f2e29d5d3b36eb1e3144587218023240
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 46000000 ...
   Using 'config-mt7986a-bananapi-bpi-r3' configuration
   Trying 'fdt-1' fdt subimage
     Description:  ARM64 OpenWrt bananapi_bpi-r3 device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x4655f000
     Data Size:    31911 Bytes = 31.2 KiB
     Architecture: AArch64
     Load Address: 0x43f00000
     Hash algo:    crc32
     Hash value:   fb34b654
     Hash algo:    sha1
     Hash value:   106d770129570c451e33f57e0cc3e411aa0a1d75
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Loading fdt from 0x4655f000 to 0x43f00000
## Loading fdt from FIT Image at 46000000 ...
   Using 'mt7986a-bananapi-bpi-r3-sd' configuration
   Trying 'fdt-mt7986a-bananapi-bpi-r3-sd' fdt subimage
     Description:  ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-sd
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x4656a000
     Data Size:    836 Bytes = 836 Bytes
     Architecture: AArch64
     Hash algo:    crc32
     Hash value:   d42f2ae8
     Hash algo:    sha1
     Hash value:   17df94373cd82dec3921ddc92c3a61bcc4cef81d
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 46000000 ...
   Using 'mt7986a-bananapi-bpi-r3-nand' configuration
   Trying 'fdt-mt7986a-bananapi-bpi-r3-nand' fdt subimage
     Description:  ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-nand
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x46568000
     Data Size:    1166 Bytes = 1.1 KiB
     Architecture: AArch64
     Hash algo:    crc32
     Hash value:   80cf140c
     Hash algo:    sha1
     Hash value:   cd9c9ecb32a6ebeb009f82eb718e49d29feff6a1
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x43f00000
Working FDT set to 43f00000
## Loading loadables from FIT Image at 46000000 ...
   Trying 'rootfs-1' loadables subimage
     Description:  ARM64 OpenWrt bananapi_bpi-r3 rootfs
     Type:         Filesystem Image
     Compression:  uncompressed
     Data Start:   0x4656c000
     Data Size:    8441856 Bytes = 8.1 MiB
     Hash algo:    crc32
     Hash value:   bcbb09f4
     Hash algo:    sha1
     Hash value:   d0832264a433a3f311385cfbf2c947b1dd05adf5
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Uncompressing Kernel Image to 44000000
   Loading Device Tree to 00000000be7e0000, end 00000000be7ea0fa ... OK
Working FDT set to be7e0000
Add 'ramoops@42ff0000' node failed: FDT_ERR_EXISTS
set /chosen/rootdisk to bootrom media: rootdisk-sd (phandle 0x00000059)

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.6.60 (cezary@eko.one.pl) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28010-49d8f4b833) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Fri Nov 15 23:11:29 2024
[    0.000000] Machine model: Bananapi BPI-R3
[    0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000
[    0.000000] OF: reserved mem: 0x0000000043000000..0x000000004302ffff (192 KiB) nomap non-reusable secmon@43000000
[    0.000000] OF: reserved mem: 0x000000004fc00000..0x000000004fcfffff (1024 KiB) nomap non-reusable wmcpu-reserved@4fc00000
[    0.000000] OF: reserved mem: 0x000000004fd00000..0x000000004fd3ffff (256 KiB) nomap non-reusable wo-emi@4fd00000
[    0.000000] OF: reserved mem: 0x000000004fd40000..0x000000004fd7ffff (256 KiB) nomap non-reusable wo-emi@4fd40000
[    0.000000] OF: reserved mem: 0x000000004fd80000..0x000000004ffbffff (2304 KiB) nomap non-reusable wo-data@4fd80000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000042ffffff]
[    0.000000]   node   0: [mem 0x0000000043000000-0x000000004302ffff]
[    0.000000]   node   0: [mem 0x0000000043030000-0x000000004fbfffff]
[    0.000000]   node   0: [mem 0x000000004fc00000-0x000000004ffbffff]
[    0.000000]   node   0: [mem 0x000000004ffc0000-0x00000000bfffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.4
[    0.000000] percpu: Embedded 18 pages/cpu s35560 r8192 d29976 u73728
[    0.000000] pcpu-alloc: s35560 r8192 d29976 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: root=/dev/fit0 rootwait
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516096
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 2MB
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000bf67f000-0x00000000bf87f000] (2MB)
[    0.000000] Memory: 2037972K/2097152K available (9024K kernel code, 998K rwdata, 1668K rodata, 448K init, 305K bss, 59180K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 640 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: 0xffffffc080010080
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
[    0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
[    0.000069] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
[    0.000077] pid_max: default: 32768 minimum: 301
[    0.002050] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.002061] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.003607] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.003991] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.004093] rcu: Hierarchical SRCU implementation.
[    0.004095] rcu:     Max phase no-delay instances is 1000.
[    0.004416] smp: Bringing up secondary CPUs ...
[    0.004678] Detected VIPT I-cache on CPU1
[    0.004713] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
[    0.004740] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.005038] Detected VIPT I-cache on CPU2
[    0.005060] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000
[    0.005071] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.005333] Detected VIPT I-cache on CPU3
[    0.005350] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000
[    0.005360] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.005386] smp: Brought up 1 node, 4 CPUs
[    0.005390] SMP: Total of 4 processors activated.
[    0.005392] CPU features: detected: 32-bit EL0 Support
[    0.005395] CPU features: detected: CRC32 instructions
[    0.005419] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.005422] CPU: All CPU(s) started at EL2
[    0.005424] alternatives: applying system-wide alternatives
[    0.008463] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.008479] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.009353] pinctrl core: initialized pinctrl subsystem
[    0.010206] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.010743] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.010771] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.010794] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.011106] thermal_sys: Registered thermal governor 'fair_share'
[    0.011110] thermal_sys: Registered thermal governor 'bang_bang'
[    0.011111] thermal_sys: Registered thermal governor 'step_wise'
[    0.011113] thermal_sys: Registered thermal governor 'user_space'
[    0.011166] ASID allocator initialised with 65536 entries
[    0.011853] pstore: Using crash dump compression: deflate
[    0.011857] pstore: Registered ramoops as persistent store backend
[    0.011859] ramoops: using 0x10000@0x42ff0000, ecc: 0
[    0.018817] Modules: 29616 pages in range for non-PLT usage
[    0.018826] Modules: 521136 pages in range for PLT usage
[    0.019740] cryptd: max_cpu_qlen set to 1000
[    0.020617] SCSI subsystem initialized
[    0.020699] libata version 3.00 loaded.
[    0.021775] clocksource: Switched to clocksource arch_sys_counter
[    0.023389] NET: Registered PF_INET protocol family
[    0.023507] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.025054] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.025073] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.025080] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.025149] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.025485] TCP: Hash tables configured (established 16384 bind 16384)
[    0.025782] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[    0.025894] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.025920] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.026190] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.026213] PCI: CLS 0 bytes, default 64
[    0.027211] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    0.030504] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.030509] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.052081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.053779] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges:
[    0.053800] mtk-pcie-gen3 11280000.pcie: Parsing ranges property...
[    0.053809] mtk-pcie-gen3 11280000.pcie:      MEM 0x0020000000..0x002fffffff -> 0x0020000000
[    0.053929] /soc/pcie@11280000: Failed to get clk index: 0 ret: -517
[    0.053936] mtk-pcie-gen3 11280000.pcie: failed to get clocks
[    0.056982] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.059822] printk: console [ttyS0] disabled
[    0.080153] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 116, base_baud = 2500000) is a ST16650V2
[    0.080189] printk: console [ttyS0] enabled
[    0.912192] 11003000.serial: ttyS1 at MMIO 0x11003000 (irq = 117, base_baud = 1625000) is a ST16650V2
[    0.942202] 11004000.serial: ttyS2 at MMIO 0x11004000 (irq = 118, base_baud = 1625000) is a ST16650V2
[    0.952114] mtk_rng 1020f000.rng: registered RNG driver
[    0.960154] loop: module loaded
[    0.964905] spi-nand spi0.0: Winbond SPI NAND was found.
[    0.970214] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
[    0.978584] 2 fixed-partitions partitions found on MTD device spi0.0
[    0.984952] OF: Bad cell count for /soc/spi@1100a000/spi_nand@0/partitions
[    0.991924] OF: Bad cell count for /soc/spi@1100a000/spi_nand@0/partitions
[    0.998978] Creating 2 MTD partitions on "spi0.0":
[    1.003775] 0x000000200000-0x000008000000 : "ubi"
[    1.146245] ubi0: default fastmap pool size: 50
[    1.150779] ubi0: default fastmap WL pool size: 25
[    1.155561] ubi0: attaching mtd0
[    4.853833] ubi0: scanning is finished
[    4.899161] ubi0: attached mtd0 (name "ubi", size 126 MiB)
[    4.904663] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.911518] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    4.918287] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.925230] ubi0: good PEBs: 1008, bad PEBs: 0, corrupted PEBs: 0
[    4.931302] ubi0: user volume: 7, internal volumes: 1, max. volumes count: 128
[    4.938503] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
[    4.946833] ubi0: available PEBs: 0, total reserved PEBs: 1008, PEBs reserved for bad PEB handling: 20
[    4.956119] ubi0: background thread "ubi_bgt0d" started, PID 294
[    4.958418] block ubiblock0_2: created from ubi0:2(fit)
[    4.967471] 0x000000000000-0x000000200000 : "bl2"
[    5.105560] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc081800000, irq 123
[    5.115356] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc081800000, irq 123
[    5.125056] i2c_dev: i2c /dev entries driver
[    5.131253] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[    5.139880] NET: Registered PF_INET6 protocol family
[    5.145518] Segment Routing with IPv6
[    5.149189] In-situ OAM (IOAM) with IPv6
[    5.153165] NET: Registered PF_PACKET protocol family
[    5.158221] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    5.171286] 8021q: 802.1Q VLAN Support v1.8
[    5.189437] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges:
[    5.196767] mtk-pcie-gen3 11280000.pcie: Parsing ranges property...
[    5.203025] mtk-pcie-gen3 11280000.pcie:      MEM 0x0020000000..0x002fffffff -> 0x0020000000
[    5.211476] debugfs: File 'type' in directory 'phy-soc:t-phy.0' already present!
[    5.218856] debugfs: File 'efuse' in directory 'phy-soc:t-phy.0' already present!
[    5.226320] debugfs: File 'intr' in directory 'phy-soc:t-phy.0' already present!
[    5.233696] debugfs: File 'tx-imp' in directory 'phy-soc:t-phy.0' already present!
[    5.241241] debugfs: File 'rx-imp' in directory 'phy-soc:t-phy.0' already present!
[    5.256315] mmc0: host does not support reading read-only switch, assuming write-enable
[    5.266410] mmc0: new high speed SDHC card at address 59b4
[    5.272782] mmcblk0: mmc0:59b4 SD    7.23 GiB
[    5.281968] Alternate GPT is invalid, using primary GPT.
[    5.287285]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
[    5.508805] mtk-pcie-gen3 11280000.pcie: set MEM trans window[0]: cpu_addr = 0x20000000, pci_addr = 0x20000000, size = 0x10000000
[    5.520761] mtk-pcie-gen3 11280000.pcie: PCI host bridge to bus 0000:00
[    5.527371] pci_bus 0000:00: root bus resource [bus 00-ff]
[    5.532844] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
[    5.539698] pci_bus 0000:00: scanning bus
[    5.543719] pci 0000:00:00.0: [14c3:1f32] type 01 class 0x060400
[    5.549719] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[    5.556555] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    5.562635] pci 0000:00:00.0: PME# disabled
[    5.567590] pci_bus 0000:00: fixups for bus
[    5.571760] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 0
[    5.578447] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    5.586437] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 1
[    5.593183] pci_bus 0000:01: scanning bus
[    5.597202] pci 0000:01:00.0: [2646:501c] type 00 class 0x010802
[    5.603222] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    5.610210] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[    5.651811] pci_bus 0000:01: fixups for bus
[    5.655980] pci_bus 0000:01: bus scan returning with max=01
[    5.661534] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    5.668139] pci_bus 0000:00: bus scan returning with max=01
[    5.673711] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
[    5.680479] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x20107fff 64bit]
[    5.687778] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x20003fff 64bit]
[    5.695081] pci 0000:00:00.0: PCI bridge to [bus 01]
[    5.700030] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
[    5.706914] pcieport 0000:00:00.0: assign IRQ: got 130
[    5.712046] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    5.718130] pcieport 0000:00:00.0: enabling bus mastering
[    5.723995] mtk-pcie-gen3 11280000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11280c00 data 0
[    5.732422] mtk-pcie-gen3 11280000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11280c00 data 1
[    5.740837] mtk-pcie-gen3 11280000.pcie: msi#0x2 address_hi 0x0 address_lo 0x11280c00 data 2
[    5.749254] mtk-pcie-gen3 11280000.pcie: msi#0x3 address_hi 0x0 address_lo 0x11280c00 data 3
[    5.757672] mtk-pcie-gen3 11280000.pcie: msi#0x4 address_hi 0x0 address_lo 0x11280c00 data 4
[    5.766089] mtk-pcie-gen3 11280000.pcie: msi#0x5 address_hi 0x0 address_lo 0x11280c00 data 5
[    5.774508] mtk-pcie-gen3 11280000.pcie: msi#0x6 address_hi 0x0 address_lo 0x11280c00 data 6
[    5.782926] mtk-pcie-gen3 11280000.pcie: msi#0x7 address_hi 0x0 address_lo 0x11280c00 data 7
[    5.791341] mtk-pcie-gen3 11280000.pcie: msi#0x8 address_hi 0x0 address_lo 0x11280c00 data 8
[    5.799758] mtk-pcie-gen3 11280000.pcie: msi#0x9 address_hi 0x0 address_lo 0x11280c00 data 9
[    5.808175] mtk-pcie-gen3 11280000.pcie: msi#0xa address_hi 0x0 address_lo 0x11280c00 data 10
[    5.816680] mtk-pcie-gen3 11280000.pcie: msi#0xb address_hi 0x0 address_lo 0x11280c00 data 11
[    5.825185] mtk-pcie-gen3 11280000.pcie: msi#0xc address_hi 0x0 address_lo 0x11280c00 data 12
[    5.833690] mtk-pcie-gen3 11280000.pcie: msi#0xd address_hi 0x0 address_lo 0x11280c00 data 13
[    5.842193] mtk-pcie-gen3 11280000.pcie: msi#0xe address_hi 0x0 address_lo 0x11280c00 data 14
[    5.850694] mtk-pcie-gen3 11280000.pcie: msi#0xf address_hi 0x0 address_lo 0x11280c00 data 15
[    5.859198] mtk-pcie-gen3 11280000.pcie: msi#0x10 address_hi 0x0 address_lo 0x11280c00 data 16
[    5.867788] mtk-pcie-gen3 11280000.pcie: msi#0x11 address_hi 0x0 address_lo 0x11280c00 data 17
[    5.876379] mtk-pcie-gen3 11280000.pcie: msi#0x12 address_hi 0x0 address_lo 0x11280c00 data 18
[    5.884970] mtk-pcie-gen3 11280000.pcie: msi#0x13 address_hi 0x0 address_lo 0x11280c00 data 19
[    5.893563] mtk-pcie-gen3 11280000.pcie: msi#0x14 address_hi 0x0 address_lo 0x11280c00 data 20
[    5.902154] mtk-pcie-gen3 11280000.pcie: msi#0x15 address_hi 0x0 address_lo 0x11280c00 data 21
[    5.910741] mtk-pcie-gen3 11280000.pcie: msi#0x16 address_hi 0x0 address_lo 0x11280c00 data 22
[    5.919331] mtk-pcie-gen3 11280000.pcie: msi#0x17 address_hi 0x0 address_lo 0x11280c00 data 23
[    5.927922] mtk-pcie-gen3 11280000.pcie: msi#0x18 address_hi 0x0 address_lo 0x11280c00 data 24
[    5.936515] mtk-pcie-gen3 11280000.pcie: msi#0x19 address_hi 0x0 address_lo 0x11280c00 data 25
[    5.945105] mtk-pcie-gen3 11280000.pcie: msi#0x1a address_hi 0x0 address_lo 0x11280c00 data 26
[    5.953695] mtk-pcie-gen3 11280000.pcie: msi#0x1b address_hi 0x0 address_lo 0x11280c00 data 27
[    5.962286] mtk-pcie-gen3 11280000.pcie: msi#0x1c address_hi 0x0 address_lo 0x11280c00 data 28
[    5.970873] mtk-pcie-gen3 11280000.pcie: msi#0x1d address_hi 0x0 address_lo 0x11280c00 data 29
[    5.979463] mtk-pcie-gen3 11280000.pcie: msi#0x1e address_hi 0x0 address_lo 0x11280c00 data 30
[    5.988054] mtk-pcie-gen3 11280000.pcie: msi#0x1f address_hi 0x0 address_lo 0x11280c00 data 31
[    5.997164] mtk-pcie-gen3 11280000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11280c00 data 0
[    6.005691] pcieport 0000:00:00.0: PME: Signaling with IRQ 131
[    6.011690] pcieport 0000:00:00.0: AER: enabled with IRQ 131
[    6.017407] pcieport 0000:00:00.0: save config 0x00: 0x1f3214c3
[    6.023316] pcieport 0000:00:00.0: save config 0x04: 0x00100406
[    6.029217] pcieport 0000:00:00.0: save config 0x08: 0x06040001
[    6.035121] pcieport 0000:00:00.0: save config 0x0c: 0x00010000
[    6.041021] pcieport 0000:00:00.0: save config 0x10: 0x20100004
[    6.046927] pcieport 0000:00:00.0: save config 0x14: 0x00000000
[    6.052831] pcieport 0000:00:00.0: save config 0x18: 0x00010100
[    6.058731] pcieport 0000:00:00.0: save config 0x1c: 0x000001f1
[    6.064635] pcieport 0000:00:00.0: save config 0x20: 0x20002000
[    6.070535] pcieport 0000:00:00.0: save config 0x24: 0x0001fff1
[    6.076445] pcieport 0000:00:00.0: save config 0x28: 0x00000000
[    6.082350] pcieport 0000:00:00.0: save config 0x2c: 0x00000000
[    6.088250] pcieport 0000:00:00.0: save config 0x30: 0x00000000
[    6.094154] pcieport 0000:00:00.0: save config 0x34: 0x00000080
[    6.100054] pcieport 0000:00:00.0: save config 0x38: 0x00000000
[    6.105958] pcieport 0000:00:00.0: save config 0x3c: 0x00020182
[    6.113415] FIT: Detected U-Boot 2024.10-OpenWrt-r28019-e39f5d4b36
[    6.119587] FIT: Selected configuration: "config-mt7986a-bananapi-bpi-r3" (OpenWrt bananapi_bpi-r3)
[    6.128688] FIT:           kernel sub-image 0x00001000..0x0055ee3e "kernel-1" (ARM64 OpenWrt Linux-6.6.60)
[    6.138425] FIT:          flat_dt sub-image 0x0055f000..0x00566ca6 "fdt-1" (ARM64 OpenWrt bananapi_bpi-r3 device tree blob)
[    6.149634] FIT:          flat_dt sub-image 0x00567000..0x005673dd "fdt-mt7986a-bananapi-bpi-r3-emmc" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-emmc)
[    6.165957] FIT:          flat_dt sub-image 0x00568000..0x0056848d "fdt-mt7986a-bananapi-bpi-r3-nand" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-nand)
[    6.182282] FIT:          flat_dt sub-image 0x00569000..0x005694bd "fdt-mt7986a-bananapi-bpi-r3-nor" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-nor)
[    6.198430] FIT:          flat_dt sub-image 0x0056a000..0x0056a343 "fdt-mt7986a-bananapi-bpi-r3-sd" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-sd)
[    6.214407] FIT:          flat_dt sub-image 0x0056b000..0x0056b555 "fdt-mt7986a-bananapi-bpi-r3-respeaker-2mics" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-respeaker-2mics)
[    6.232631] FIT:       filesystem sub-image 0x0056c000..0x00d78fff "rootfs-1" (ARM64 OpenWrt bananapi_bpi-r3 rootfs)
[    6.243588] block mmcblk0p7: mapped 1 uImage.FIT filesystem sub-image as /dev/fit0
[    6.251405] block mmcblk0p7: mapped remaining space as /dev/fitrw
[    6.343939] mt7530-mdio mdio-bus:1f: configuring for fixed/2500base-x link mode
[    6.352979] mt7530-mdio mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx
[    6.363455] mt7530-mdio mdio-bus:1f wan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7531 PHY] (irq=132)
[    6.385535] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=133)
[    6.407409] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=134)
[    6.429272] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=135)
[    6.451146] mt7530-mdio mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7531 PHY] (irq=136)
[    6.462414] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode
[    6.469131] DSA: tree 0 setup
[    6.472361] clk: Disabling unused clocks
[    6.483628] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
[    6.490874] Freeing unused kernel memory: 448K
[    6.495421] Run /sbin/init as init process
[    6.499502]   with arguments:
[    6.502465]     /sbin/init
[    6.505157]   with environment:
[    6.508281]     HOME=/
[    6.510625]     TERM=linux
[    6.658682] init: Console is alive
[    6.662198] init: - watchdog -
[    7.106999] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    7.136538] usbcore: registered new interface driver usbfs
[    7.142091] usbcore: registered new interface driver hub
[    7.147415] usbcore: registered new device driver usb
[    7.156678] gpio_button_hotplug: loading out-of-tree module taints kernel.
[    7.163937] mt7986a-pinctrl 1001f000.pinctrl: pin GPIO_4 already requested by 11280000.pcie; cannot claim for pinctrl_moore:521
[    7.175442] mt7986a-pinctrl 1001f000.pinctrl: pin-9 (pinctrl_moore:521) status -22
[    7.183002] gpio-keys: probe of gpio-keys failed with error -22
[    7.192262] nvme 0000:01:00.0: assign IRQ: got 130
[    7.197199] nvme nvme0: pci function 0000:01:00.0
[    7.201934] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[    7.207671] nvme 0000:01:00.0: enabling bus mastering
[    7.212802] mtk-pcie-gen3 11280000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11280c00 data 1
[    7.221239] nvme 0000:01:00.0: save config 0x00: 0x501c2646
[    7.226805] nvme 0000:01:00.0: save config 0x04: 0x00100406
[    7.232375] nvme 0000:01:00.0: save config 0x08: 0x01080201
[    7.237929] nvme 0000:01:00.0: save config 0x0c: 0x00000000
[    7.243498] nvme 0000:01:00.0: save config 0x10: 0x20000004
[    7.249053] nvme 0000:01:00.0: save config 0x14: 0x00000000
[    7.254629] nvme 0000:01:00.0: save config 0x18: 0x00000000
[    7.260184] nvme 0000:01:00.0: save config 0x1c: 0x00000000
[    7.265748] nvme 0000:01:00.0: save config 0x20: 0x00000000
[    7.271303] nvme 0000:01:00.0: save config 0x24: 0x00000000
[    7.276861] nvme 0000:01:00.0: save config 0x28: 0x00000000
[    7.282419] nvme 0000:01:00.0: save config 0x2c: 0x501c2646
[    7.287974] nvme 0000:01:00.0: save config 0x30: 0x00000000
[    7.293532] nvme 0000:01:00.0: save config 0x34: 0x00000080
[    7.299087] nvme 0000:01:00.0: save config 0x38: 0x00000000
[    7.304644] nvme 0000:01:00.0: save config 0x3c: 0x00000182
[    7.332735] hwmon hwmon1: temp1_input not attached to any thermal zone
[    7.339268] hwmon hwmon1: temp3_input not attached to any thermal zone
[    7.348812] nvme nvme0: allocated 64 MiB host memory buffer.
[    7.371310] mtk-pcie-gen3 11280000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11280c00 data 1
[    7.379760] mtk-pcie-gen3 11280000.pcie: msi#0x2 address_hi 0x0 address_lo 0x11280c00 data 2
[    7.388199] mtk-pcie-gen3 11280000.pcie: msi#0x3 address_hi 0x0 address_lo 0x11280c00 data 3
[    7.396639] mtk-pcie-gen3 11280000.pcie: msi#0x4 address_hi 0x0 address_lo 0x11280c00 data 4
[    7.405080] mtk-pcie-gen3 11280000.pcie: msi#0x5 address_hi 0x0 address_lo 0x11280c00 data 5
[    7.418231] nvme nvme0: 4/0/0 default/read/poll queues
[    7.429164] xhci-mtk 11200000.usb: supply vbus not found, using dummy regulator
[    7.436591] xhci-mtk 11200000.usb: supply vusb33 not found, using dummy regulator
[    7.444912] xhci-mtk 11200000.usb: xHCI Host Controller
[    7.450137] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1
[    7.460591] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000200010
[    7.469747] xhci-mtk 11200000.usb: irq 142, io mem 0x11200000
[    7.475579] xhci-mtk 11200000.usb: xHCI Host Controller
[    7.480792] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2
[    7.488175] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
[    7.495546] hub 1-0:1.0: USB hub found
[    7.499301] hub 1-0:1.0: 2 ports detected
[    7.503687] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    7.512060] hub 2-0:1.0: USB hub found
[    7.515816] hub 2-0:1.0: 1 port detected
[    7.524353] usbcore: registered new interface driver usb-storage
[    7.531071] usbcore: registered new interface driver uas
[    7.536583] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    7.552220] init: - preinit -
[    7.812282] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[    7.820737] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
[    7.961785] usb 1-1: new high-speed USB device number 2 using xhci-mtk
[    8.142504] hub 1-1:1.0: USB hub found
[    8.146305] hub 1-1:1.0: 4 ports detected
[    9.021778] random: crng init done
[   11.630397] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   15.885663] mount_root: loading kmods from internal overlay
[   15.900105] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[   15.910029] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[   17.711083] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[   17.717935] block: unable to load configuration (fstab: Entry not found)
[   17.724656] block: attempting to load /tmp/overlay/etc/config/fstab
[   17.730939] block: unable to load configuration (fstab: Entry not found)
[   17.737649] block: attempting to load /etc/config/fstab
[   17.744289] block: unable to load configuration (fstab: Entry not found)
[   17.750994] block: no usable configuration
[   17.761117] UBIFS (ubi0:6): Mounting in unauthenticated mode
[   17.766855] UBIFS (ubi0:6): background thread "ubifs_bgt0_6" started, PID 922
[   18.125091] UBIFS (ubi0:6): UBIFS: mounted UBI device 0, volume 6, name "rootfs_data"
[   18.132923] UBIFS (ubi0:6): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   18.142815] UBIFS (ubi0:6): FS size: 89391104 bytes (85 MiB, 704 LEBs), max 715 LEBs, journal size 4444160 bytes (4 MiB, 35 LEBs)
[   18.154440] UBIFS (ubi0:6): reserved for root: 4222162 bytes (4123 KiB)
[   18.161032] UBIFS (ubi0:6): media format: w5/r0 (latest is w5/r0), UUID 2B5A501B-E190-4EDD-9A86-10A4B1A23A79, small LPT model
[   18.176172] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[   18.183251] block: unable to load configuration (fstab: Entry not found)
[   18.189963] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[   18.196436] block: unable to load configuration (fstab: Entry not found)
[   18.203155] block: attempting to load /etc/config/fstab
[   18.208397] block: unable to load configuration (fstab: Entry not found)
[   18.215109] block: no usable configuration
[   18.229989] UBIFS (ubi0:6): un-mount UBI device 0
[   18.234696] UBIFS (ubi0:6): background thread "ubifs_bgt0_6" stops
[   18.261281] F2FS-fs (fitrw): Found nat_bits in checkpoint
[   18.275254] F2FS-fs (fitrw): Mounted with checkpoint version = 6eb89b81
[   19.842250] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[   19.849082] block: unable to load configuration (fstab: Entry not found)
[   19.855814] block: attempting to load /tmp/overlay/etc/config/fstab
[   19.862377] block: unable to load configuration (fstab: Entry not found)
[   19.869084] block: attempting to load /etc/config/fstab
[   19.874401] block: unable to load configuration (fstab: Entry not found)
[   19.881105] block: no usable configuration
[   19.890983] UBIFS (ubi0:6): Mounting in unauthenticated mode
[   19.896714] UBIFS (ubi0:6): background thread "ubifs_bgt0_6" started, PID 930
[   20.255258] UBIFS (ubi0:6): UBIFS: mounted UBI device 0, volume 6, name "rootfs_data"
[   20.263086] UBIFS (ubi0:6): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   20.272978] UBIFS (ubi0:6): FS size: 89391104 bytes (85 MiB, 704 LEBs), max 715 LEBs, journal size 4444160 bytes (4 MiB, 35 LEBs)
[   20.284602] UBIFS (ubi0:6): reserved for root: 4222162 bytes (4123 KiB)
[   20.291195] UBIFS (ubi0:6): media format: w5/r0 (latest is w5/r0), UUID 2B5A501B-E190-4EDD-9A86-10A4B1A23A79, small LPT model
[   20.306327] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[   20.313406] block: unable to load configuration (fstab: Entry not found)
[   20.320118] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[   20.326593] block: unable to load configuration (fstab: Entry not found)
[   20.333314] block: attempting to load /etc/config/fstab
[   20.338556] block: unable to load configuration (fstab: Entry not found)
[   20.345269] block: no usable configuration
[   20.360153] UBIFS (ubi0:6): un-mount UBI device 0
[   20.364858] UBIFS (ubi0:6): background thread "ubifs_bgt0_6" stops
[   20.376294] mount_root: overlay filesystem has not been fully initialized yet
[   20.383687] mount_root: switching to f2fs overlay
[   20.392437] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[   20.405281] urandom-seed: Seed file not found (/etc/urandom.seed)
[   20.435493] procd: - early -
[   20.438420] procd: - watchdog -
Failed to connect to ubus
[   20.972126] procd: - watchdog -
[   20.987062] procd: - ubus -
[   21.156331] procd: - init -
Please press Enter to activate this console.
[   21.365349] kmodloader: loading kernel modules from /etc/modules.d/*
[   21.395854] OpenVPN data channel offload (ovpn-dco) 2.0.0 -- (C) 2020-2023 OpenVPN, Inc.
[   21.405638] tun: Universal TUN/TAP device driver, 1.6
[   21.418201] i2c-gpio i2c-gpio-0: using lines 528 (SDA) and 529 (SCL)
[   21.424918] i2c-gpio i2c-gpio-1: using lines 530 (SDA) and 531 (SCL)
[   21.435827] ntfs3: Enabled Linux POSIX ACLs support
[   21.442753] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0
[   21.461112] usbcore: registered new interface driver cdc_acm
[   21.466797] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   21.475675] usbcore: registered new interface driver cdc_wdm
[   21.481690] Loading modules backported from Linux version v6.11.2-0-g7aa21fec187b
[   21.487019] urngd: v1.0.2 started.
[   21.489180] Backport generated by backports.git v6.1.110-1-32-gc61f71fe0942
[   21.505136] sfp sfp-1: Host maximum power 3.0W
[   21.510169] sfp sfp-2: Host maximum power 3.0W
[   21.517245] usbcore: registered new interface driver usblp
[   21.525340] usbcore: registered new interface driver usbserial_generic
[   21.531912] usbserial: USB Serial support registered for generic
[   21.538612] usbcore: registered new interface driver cdc_ether
[   21.545439] usbcore: registered new interface driver cdc_ncm
[   21.558536] usbcore: registered new interface driver huawei_cdc_ncm
[   21.975547] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20240823160739a
[   21.975547]
[   22.105452] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20240823160804
[   22.204086] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20240823160840
[   42.711779] mt798x-wmac 18000000.wifi: Retry message 00000002 (seq 11)
[   63.191778] mt798x-wmac 18000000.wifi: Message 00000002 (seq 11) timeout
[   63.198466] mt798x-wmac 18000000.wifi: Failed to start WA firmware
[   63.198484] Unable to handle kernel write to read-only memory at virtual address 0000000000000008
[   63.213477] Mem abort info:
[   63.216255]   ESR = 0x0000000096000045
[   63.219987]   EC = 0x25: DABT (current EL), IL = 32 bits
[   63.225284]   SET = 0, FnV = 0
[   63.228323]   EA = 0, S1PTW = 0
[   63.231447]   FSC = 0x05: level 1 translation fault
[   63.236309] Data abort info:
[   63.239174]   ISV = 0, ISS = 0x00000045, ISS2 = 0x00000000
[   63.244641]   CM = 0, WnR = 1, TnD = 0, TagAccess = 0
[   63.249673]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[   63.254969] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000049967000
[   63.261389] [0000000000000008] pgd=0800000049bf9003, p4d=0800000049bf9003, pud=0800000049bf9003, pmd=0000000000000000
[   63.271978] Internal error: Oops: 0000000096000045 [#1] SMP
[   63.277532] Modules linked in: mt7915e(O+) mt76_connac_lib(O) mt76(O) mac80211(O) libchacha20poly1305 huawei_cdc_ncm chacha_neon cfg80211(O) cdc_ncm cdc_ether usbserial usbnet usblp ts_kmp ts_fsm ts_bm slhc sfp poly1305_neon nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 mdio_i2c libcurve25519_generic libcrc32c libchacha compat(O) cdc_wdm cdc_acm crypto_safexcel ntfs3 pwm_fan i2c_gpio i2c_algo_bit ksmbd nls_ucs2_utils cifs_arc4 asn1_decoder oid_registry tun ovpn_dco_v2(O) udp_tunnel ip6_udp_tunnel netfs nls_utf8 nls_iso8859_1 nls_cp437 sha512_arm64 sha1_ce sha1_generic seqiv md5 geniv des_generic libdes authencesn authenc uas usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_mtk_hcd xhci_hcd nvme nvme_core gpio_button_hotplug(O) vfat fat exfat usbcore usb_common aquantia mii
[   63.349348] CPU: 1 PID: 292 Comm: kworker/u8:3 Tainted: G           O       6.6.60 #0
[   63.357155] Hardware name: Bananapi BPI-R3 (DT)
[   63.361667] Workqueue: mt76 0xffffffc0790ade08 [mt7915e@00000000c26bc545+0x1b000]
[   63.369133] pstate: a0400005 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   63.376073] pc : 0xffffffc079081ab0 [mt76@00000000082ec4ab+0xc000]
[   63.382234] lr : 0xffffffc079082078 [mt76@00000000082ec4ab+0xc000]
[   63.388394] sp : ffffffc08152bc10
[   63.391692] x29: ffffffc08152bc10 x28: ffffffc08152bc80 x27: ffffff8009e39fe0
[   63.398807] x26: ffffffffffff5af8 x25: ffffff8009e31ff8 x24: ffffff8009e35678
[   63.405923] x23: ffffff8009e32790 x22: ffffff8009e31fe0 x21: ffffff8009e32008
[   63.413038] x20: ffffff8009e31fe0 x19: ffffff8009e31fe0 x18: ffffff800112b32c
[   63.420155] x17: ffffff800112b000 x16: 0000000000000028 x15: 000003743ac8edee
[   63.427270] x14: 0000000000000000 x13: 0000000000000020 x12: 0101010101010101
[   63.434385] x11: 7f7f7f7f7f7f7f7f x10: fefefefefefefeff x9 : 7f7f7f7f7f7f7f7f
[   63.441501] x8 : 8080808080808080 x7 : ffffff8000fc7440 x6 : ffffffffffff2460
[   63.448616] x5 : ffffffc08152bc78 x4 : 0000000000000000 x3 : ffffff8009e32010
[   63.455732] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
[   63.462848] Call trace:
[   63.465280]  0xffffffc079081ab0 [mt76@00000000082ec4ab+0xc000]
[   63.471094]  0xffffffc079082078 [mt76@00000000082ec4ab+0xc000]
[   63.476908]  0xffffffc0790aea24 [mt7915e@00000000c26bc545+0x1b000]
[   63.483068]  0xffffffc080056fac
[   63.486193]  0xffffffc0800573ec
[   63.489318]  0xffffffc08005ea8c
[   63.492443]  0xffffffc080013024
[   63.495570] Code: f94037e3 eb00007f 54000120 a94306c2 (f900045c)
[   63.501643] ---[ end trace 0000000000000000 ]---
[   63.510945] pstore: backend (ramoops) writing error (-28)
[   63.516326] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[   63.523178] SMP: stopping secondary CPUs
[   63.527087] Kernel Offset: disabled
[   63.530557] CPU features: 0x0,00000000,00000000,1000400b
[   63.535849] Memory Limit: none
[   63.543433] Rebooting in 1 seconds..

lsblk /dev/mmcblk0 /dev/mtdblock* -o START,SIZE,FSTYPE,NAME,PARTLABEL

root@BananaPi_BPi-R3 /root [#]# lsblk /dev/mmcblk0 /dev/mtdblock* -o START,SIZE,FSTYPE,NAME,PARTLABEL
 START  SIZE FSTYPE NAME        PARTLABEL
        126M ubi    mtdblock0
          2M        mtdblock1
        7.4G        mmcblk0
    34    4M        ├─mmcblk0p1 bl2
  8192  512K        ├─mmcblk0p2 ubootenv
  9216    2M        ├─mmcblk0p3 factory
 13312    4M        ├─mmcblk0p4 fip
 24576   32M        ├─mmcblk0p5 recovery
 90112   20M        ├─mmcblk0p6 install
131072  104M        └─mmcblk0p7 production
root@BananaPi_BPi-R3 /root [#]#