• Skąd: Warszawa
  • Zarejestrowany: 2018-10-06
  • Posty: 617

Temat: OpenWRT losowo się nie uruchamia (brak komunikacji)

Cześć,

Przekompilowałem sobie jądro i system, wymieniłem flash na większy (64MB) i zauważyłem, że co kilkanaście uruchomień urządzenia nie mam z nim komunikacji po LAN oraz VPN. Proszę o pomoc w analizie i rozwiązania tego problemu. Oto dziennik, kiedy udało mi się uchwycić, kiedy urządzenie się nie "uruchamia". Log zgrałem przez UART. 

# logread
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.000000] Linux version 5.4.188 (root@Intel-D510MO) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16554-1d4dea6d4f)) #0 SMP Sat Apr 16 12:59:34 2022
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] printk: bootconsole [early0] enabled
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] MIPS: machine is UniElec U7621-06 (64M flash)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] VPE topology {2,2} total 4
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] Zone ranges:
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000]   HighMem  empty
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] Movable zone start for each node
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] Early memory node ranges
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
Thu Sep  1 19:19:48 2022 kern.debug kernel: [    0.000000] On node 0 totalpages: 65536
Thu Sep  1 19:19:48 2022 kern.debug kernel: [    0.000000]   Normal zone: 576 pages used for memmap
Thu Sep  1 19:19:48 2022 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Sep  1 19:19:48 2022 kern.debug kernel: [    0.000000]   Normal zone: 65536 pages, LIFO batch:15
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] percpu: Embedded 14 pages/cpu s26736 r8192 d22416 u57344
Thu Sep  1 19:19:48 2022 kern.debug kernel: [    0.000000] pcpu-alloc: s26736 r8192 d22416 u57344 alloc=14*4096
Thu Sep  1 19:19:48 2022 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64960
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] Writing ErrCtl register=00071812
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] Readback ErrCtl register=00071812
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] Memory: 250480K/262144K available (5916K kernel code, 202K rwdata, 1268K rodata, 1240K init, 230K bss, 11664K reserved, 0K cma-reserved, 0K highmem)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] NR_IRQS: 256
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x36c/0x584 with crng_init=0
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] CPU Clock: 880MHz
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.015514] Calibrating delay loop... 583.68 BogoMIPS (lpj=1167360)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.055874] pid_max: default: 32768 minimum: 301
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.065250] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.079658] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.098139] rcu: Hierarchical SRCU implementation.
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.108355] smp: Bringing up secondary CPUs ...
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    7.883414] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    7.883426] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    7.883440] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.883558] CPU1 revision is: 0001992f (MIPS 1004Kc)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.145592] Synchronize counters for CPU 1: done.
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    7.975338] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    7.975346] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    7.975356] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.975420] CPU2 revision is: 0001992f (MIPS 1004Kc)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.240152] Synchronize counters for CPU 2: done.
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    8.065691] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    8.065699] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    8.065707] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Thu Sep  1 19:19:48 2022 kern.info kernel: [    8.065776] CPU3 revision is: 0001992f (MIPS 1004Kc)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.327763] Synchronize counters for CPU 3: done.
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.387383] smp: Brought up 1 node, 4 CPUs
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.399981] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.419290] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.433152] pinctrl core: initialized pinctrl subsystem
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.445226] NET: Registered protocol family 16
Thu Sep  1 19:19:48 2022 kern.debug kernel: [    0.467218] FPU Affinity set after 4688 emulations
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.486845] clocksource: Switched to clocksource GIC
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.498526] NET: Registered protocol family 2
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.507522] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.522573] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.539137] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.554297] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.568474] TCP: Hash tables configured (established 2048 bind 2048)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.581216] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.594116] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.608195] NET: Registered protocol family 1
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.616767] PCI: CLS 0 bytes, default 32
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.714807] 4 CPUs re-calibrate udelay(lpj = 1167360)
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.726297] random: fast init done
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.727826] workingset: timestamp_bits=14 max_order=16 bucket_order=2
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.759407] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.770909] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.795129] mt7621_gpio 1e000600.gpio: registering 32 gpios
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.806569] mt7621_gpio 1e000600.gpio: registering 32 gpios
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.817896] mt7621_gpio 1e000600.gpio: registering 32 gpios
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.829758] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.843833] printk: console [ttyS0] disabled
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.852298] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.870217] printk: console [ttyS0] enabled
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.878492] printk: bootconsole [early0] disabled
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.890761] spi-mt7621 1e000b00.spi: sys_freq: 220000000
Thu Sep  1 19:19:48 2022 kern.info kernel: [    0.897499] spi-nor spi0.0: mx66l51235l (65536 Kbytes)
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.902715] 4 fixed-partitions partitions found on MTD device spi0.0
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.909058] Creating 4 MTD partitions on "spi0.0":
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.913851] 0x000000000000-0x000000030000 : "bootloader"
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.920549] 0x000000030000-0x000000040000 : "config"
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.927000] 0x000000040000-0x000000050000 : "factory"
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.933469] 0x000000050000-0x000004000000 : "firmware"
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.940309] 2 uimage-fw partitions found on MTD device firmware
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.946262] Creating 2 MTD partitions on "firmware":
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.951260] 0x000000000000-0x0000002569de : "kernel"
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.957526] 0x0000002569de-0x000003fb0000 : "rootfs"
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.963707] mtd: device 5 (rootfs) set to be root filesystem
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.969517] 1 squashfs-split partitions found on MTD device rootfs
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    0.975701] 0x000001a90000-0x000003fb0000 : "rootfs_data"
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.009551] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.019488] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 22
Thu Sep  1 19:19:48 2022 kern.err kernel: [    1.030153] mt7621-pci 1e140000.pcie: Parsing DT failed
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.038393] NET: Registered protocol family 10
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.044413] Segment Routing with IPv6
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.048223] NET: Registered protocol family 17
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.053032] 8021q: 802.1Q VLAN Support v1.8
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.059797] gpio-export gpio-export: 1 gpio(s) exported
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.065285] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.083546] mt7530 mdio-bus:1f port0 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.093537] mt7530 mdio-bus:1f port1 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.103522] mt7530 mdio-bus:1f port2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.113458] mt7530 mdio-bus:1f port3 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.123637] mt7530 mdio-bus:1f port4 (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.133668] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.144913] DSA: tree 0 setup
Thu Sep  1 19:19:48 2022 kern.err kernel: [    1.148246] rt2880-pinmux pinctrl: pcie is already enabled
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.153896] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.161500] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.268927] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.274504] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.380025] mt7621-pci 1e140000.pcie: PCIE0 enabled
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.384893] mt7621-pci 1e140000.pcie: PCIE1 enabled
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.389760] mt7621-pci 1e140000.pcie: PCIE2 enabled
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.394634] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.404099] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.410453] pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.417317] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.424181] pci_bus 0000:00: root bus resource [bus 00-ff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.429702] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.435736] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.441994] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.448327] pci 0000:00:00.0: supports D1
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.452333] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.458464] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.464505] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.470762] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.477082] pci 0000:00:01.0: supports D1
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.481089] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.487175] pci 0000:00:02.0: [0e8d:0801] type 01 class 0x060400
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.493204] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.499467] pci 0000:00:02.0: reg 0x14: [mem 0x00000000-0x0000ffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.505803] pci 0000:00:02.0: supports D1
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.509809] pci 0000:00:02.0: PME# supported from D0 D1 D3hot
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.516824] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.524830] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.532818] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.541039] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.547088] pci 0000:01:00.0: reg 0x10: [io  0x0000-0x0007]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.552657] pci 0000:01:00.0: reg 0x14: [io  0x0000-0x0003]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.558226] pci 0000:01:00.0: reg 0x18: [io  0x0000-0x0007]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.563804] pci 0000:01:00.0: reg 0x1c: [io  0x0000-0x0003]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.569374] pci 0000:01:00.0: reg 0x20: [io  0x0000-0x001f]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.574947] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.581208] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.588025] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.603157] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.608388] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.614470] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.621247] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff pref]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.628459] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.635297] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.641343] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.647744] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.655206] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.660437] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.666518] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.673296] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff pref]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.680506] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.687364] pci 0000:03:00.0: [14c3:7612] type 00 class 0x028000
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.693418] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.700233] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.707028] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.714458] pci 0000:00:02.0: PCI bridge to [bus 03-ff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.719699] pci 0000:00:02.0:   bridge window [io  0x0000-0x0fff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.725780] pci 0000:00:02.0:   bridge window [mem 0x00000000-0x000fffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.732558] pci 0000:00:02.0:   bridge window [mem 0x00000000-0x000fffff pref]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.739768] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.746432] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.753034] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.759985] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.766590] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.773541] pci 0000:00:02.0: BAR 0: no space for [mem size 0x80000000]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.780142] pci 0000:00:02.0: BAR 0: failed to assign [mem size 0x80000000]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.787094] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.793869] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.801080] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.807858] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.815069] pci 0000:00:02.0: BAR 8: assigned [mem 0x60400000-0x604fffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.821847] pci 0000:00:02.0: BAR 9: assigned [mem 0x60500000-0x605fffff pref]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.829058] pci 0000:00:00.0: BAR 1: assigned [mem 0x60600000-0x6060ffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.835842] pci 0000:00:01.0: BAR 1: assigned [mem 0x60610000-0x6061ffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.842620] pci 0000:00:02.0: BAR 1: assigned [mem 0x60620000-0x6062ffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.849401] pci 0000:00:00.0: BAR 7: assigned [io  0x1e160000-0x1e160fff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.856179] pci 0000:00:01.0: BAR 7: assigned [io  0x1e161000-0x1e161fff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.862957] pci 0000:00:02.0: BAR 7: assigned [io  0x1e162000-0x1e162fff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.869743] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.876954] pci 0000:01:00.0: BAR 5: assigned [mem 0x60000000-0x600001ff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.883737] pci 0000:01:00.0: BAR 4: assigned [io  0x1e160000-0x1e16001f]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.890514] pci 0000:01:00.0: BAR 0: assigned [io  0x1e160020-0x1e160027]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.897302] pci 0000:01:00.0: BAR 2: assigned [io  0x1e160028-0x1e16002f]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.904084] pci 0000:01:00.0: BAR 1: assigned [io  0x1e160030-0x1e160033]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.910866] pci 0000:01:00.0: BAR 3: assigned [io  0x1e160034-0x1e160037]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.917643] pci 0000:00:00.0: PCI bridge to [bus 01]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.922600] pci 0000:00:00.0:   bridge window [io  0x1e160000-0x1e160fff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.929377] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.936153] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.943369] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.950143] pci 0000:00:01.0: PCI bridge to [bus 02]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.955105] pci 0000:00:01.0:   bridge window [io  0x1e161000-0x1e161fff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.961877] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.968652] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff pref]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.975869] pci 0000:03:00.0: BAR 0: assigned [mem 0x60400000-0x604fffff 64bit]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.983176] pci 0000:03:00.0: BAR 6: assigned [mem 0x60500000-0x6050ffff pref]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.990380] pci 0000:00:02.0: PCI bridge to [bus 03]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    1.995340] pci 0000:00:02.0:   bridge window [io  0x1e162000-0x1e162fff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    2.002111] pci 0000:00:02.0:   bridge window [mem 0x60400000-0x604fffff]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    2.008887] pci 0000:00:02.0:   bridge window [mem 0x60500000-0x605fffff pref]
Thu Sep  1 19:19:48 2022 kern.info kernel: [    2.016820] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off
Thu Sep  1 19:19:48 2022 kern.info kernel: [    2.017195] hctosys: unable to open rtc device (rtc0)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    2.035469] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
Thu Sep  1 19:19:48 2022 kern.info kernel: [    2.047417] Freeing unused kernel memory: 1240K
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    2.051967] This architecture does not have kernel memory protection.
Thu Sep  1 19:19:48 2022 kern.info kernel: [    2.058411] Run /sbin/init as init process
Thu Sep  1 19:19:48 2022 user.info kernel: [    3.049939] init: Console is alive
Thu Sep  1 19:19:48 2022 user.info kernel: [    3.053683] init: - watchdog -
Thu Sep  1 19:19:48 2022 user.info kernel: [    6.203134] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.433005] usbcore: registered new interface driver usbfs
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.438625] usbcore: registered new interface driver hub
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.444066] usbcore: registered new device driver usb
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.462352] ANTFS Module: Version 07.19-b41ba529
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.499452] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    6.513548] SCSI subsystem initialized
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.521719] ehci-fsl: Freescale EHCI Host controller driver
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.528837] ehci-platform: EHCI generic platform driver
Thu Sep  1 19:19:48 2022 kern.debug kernel: [    6.546643] libata version 3.00 loaded.
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.550761] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=24
Thu Sep  1 19:19:48 2022 kern.debug kernel: [    6.556218] ahci 0000:01:00.0: version 3.0
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.556256] pci 0000:00:00.0: enabling device (0004 -> 0007)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.561916] ahci 0000:01:00.0: enabling device (0000 -> 0003)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.567819] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.574482] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.582565] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.593177] scsi host0: ahci
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.597141] scsi host1: ahci
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.600588] ata1: SATA max UDMA/133 abar m512@0x60000000 port 0x60000100 irq 24
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.607911] ata2: SATA max UDMA/133 abar m512@0x60000000 port 0x60000180 irq 24
Thu Sep  1 19:19:48 2022 kern.info kernel: [    6.930869] ata1: SATA link down (SStatus 0 SControl 300)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.250853] ata2: SATA link down (SStatus 0 SControl 300)
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    7.265076] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    7.273869] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.282930] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.288273] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.303018] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000290010
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.312235] xhci-mtk 1e1c0000.xhci: irq 21, io mem 0x1e1c0000
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.319487] hub 1-0:1.0: USB hub found
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.323375] hub 1-0:1.0: 2 ports detected
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.328147] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.333569] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.341062] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.347598] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.356643] hub 2-0:1.0: USB hub found
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.360556] hub 2-0:1.0: 1 port detected
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.406513] usbcore: registered new interface driver usb-storage
Thu Sep  1 19:19:48 2022 user.info kernel: [    7.416012] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Sep  1 19:19:48 2022 user.info kernel: [    7.431253] init: - preinit -
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.531724] mmc0: new high speed SDHC card at address 1234
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.542174] mmcblk0: mmc0:1234 SA32G 29.1 GiB
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.548835]  mmcblk0: p1
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.770907] usb 1-2: new high-speed USB device number 2 using xhci-mtk
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.985874] hub 1-2:1.0: USB hub found
Thu Sep  1 19:19:48 2022 kern.info kernel: [    7.989919] hub 1-2:1.0: 4 ports detected
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    8.147886] random: procd: uninitialized urandom read (4 bytes read)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    8.378916] usb 1-2.2: new high-speed USB device number 3 using xhci-mtk
Thu Sep  1 19:19:48 2022 kern.info kernel: [    8.586723] usb-storage 1-2.2:1.0: USB Mass Storage device detected
Thu Sep  1 19:19:48 2022 kern.info kernel: [    8.593885] scsi host2: usb-storage 1-2.2:1.0
Thu Sep  1 19:19:48 2022 kern.info kernel: [    8.659383] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
Thu Sep  1 19:19:48 2022 kern.info kernel: [    8.667746] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Thu Sep  1 19:19:48 2022 kern.info kernel: [    8.676277] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Sep  1 19:19:48 2022 kern.info kernel: [    8.778903] usb 1-2.4: new high-speed USB device number 4 using xhci-mtk
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    8.881253] random: jshn: uninitialized urandom read (4 bytes read)
Thu Sep  1 19:19:48 2022 kern.info kernel: [    8.984774] hub 1-2.4:1.0: USB hub found
Thu Sep  1 19:19:48 2022 kern.info kernel: [    8.989017] hub 1-2.4:1.0: 4 ports detected
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    9.002002] random: jshn: uninitialized urandom read (4 bytes read)
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    9.171354] urandom_read: 4 callbacks suppressed
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    9.171366] random: jshn: uninitialized urandom read (4 bytes read)
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    9.217133] random: jshn: uninitialized urandom read (4 bytes read)
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    9.253177] random: jshn: uninitialized urandom read (4 bytes read)
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    9.608113] scsi 2:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    9.618070] scsi 2:0:0:1: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
Thu Sep  1 19:19:48 2022 kern.warn kernel: [    9.627742] sd 2:0:0:1: Power-on or device reset occurred
Thu Sep  1 19:19:48 2022 kern.notice kernel: [    9.635475] sd 2:0:0:1: [sda] Attached SCSI removable disk
Thu Sep  1 19:19:48 2022 user.info kernel: [   13.508683] mount_root: loading kmods from internal overlay
Thu Sep  1 19:19:48 2022 user.info kernel: [   13.550458] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Thu Sep  1 19:19:48 2022 user.info kernel: [   13.558990] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Thu Sep  1 19:19:48 2022 kern.notice kernel: [   13.931918] crng init done
Thu Sep  1 19:19:48 2022 kern.notice kernel: [   14.983815] jffs2: notice: (691) jffs2_build_xattr_subsystem: complete building xattr subsystem, 56 of xdatum (12 unchecked, 44 orphan) and 58 of xref (44 dead, 0 orphan) found.
Thu Sep  1 19:19:48 2022 user.info kernel: [   15.000650] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Sep  1 19:19:48 2022 user.info kernel: [   15.017548] block: extroot: not configured
Thu Sep  1 19:19:48 2022 kern.notice kernel: [   15.290540] jffs2: notice: (689) jffs2_build_xattr_subsystem: complete building xattr subsystem, 56 of xdatum (12 unchecked, 44 orphan) and 58 of xref (44 dead, 0 orphan) found.
Thu Sep  1 19:19:48 2022 user.info kernel: [   16.259446] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Sep  1 19:19:48 2022 user.info kernel: [   16.273058] block: extroot: not configured
Thu Sep  1 19:19:48 2022 user.info kernel: [   16.279106] mount_root: switching to jffs2 overlay
Thu Sep  1 19:19:48 2022 kern.warn kernel: [   16.291030] overlayfs: upper fs does not support tmpfile.
Thu Sep  1 19:19:48 2022 user.warn kernel: [   16.302324] urandom-seed: Seeding with /etc/urandom.seed
Thu Sep  1 19:19:48 2022 user.info kernel: [   16.479260] procd: - early -
Thu Sep  1 19:19:48 2022 user.info kernel: [   16.482248] procd: - watchdog -
Thu Sep  1 19:19:48 2022 user.info kernel: [   17.087141] procd: - watchdog -
Thu Sep  1 19:19:48 2022 user.info kernel: [   17.094131] procd: - ubus -
Thu Sep  1 19:19:48 2022 user.info kernel: [   17.278718] procd: - init -
Thu Sep  1 19:19:48 2022 user.info kernel: [   18.229397] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.355783] usb 1-2.2: USB disconnect, device number 3
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.405527] tun: Universal TUN/TAP device driver, 1.6
Thu Sep  1 19:19:48 2022 user.info kernel: [   18.426652] urngd: v1.0.2 started.
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.469608] GACT probability on
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.474488] Mirror/redirect action on
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.491132] u32 classifier
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.493851]     input device check on
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.497666]     Actions configured
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.531696] fuse: init (API version 7.31)
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.542555] Loading modules backported from Linux version v5.10.110-0-g3238bffaf992
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.550243] Backport generated by backports.git v5.10.110-1-0-g1fbde860
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.592969] usbcore: registered new interface driver usbserial_generic
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.599796] usbserial: USB Serial support registered for generic
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.646565] xt_time: kernel timezone is -0000
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.653535] usbcore: registered new interface driver cdc_ether
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.767048] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=25
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.772609] pci 0000:00:01.0: enabling device (0004 -> 0007)
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.778307] mt7603e 0000:02:00.0: enabling device (0000 -> 0002)
Thu Sep  1 19:19:48 2022 kern.info kernel: [   18.784622] mt7603e 0000:02:00.0: ASIC revision: 76030010
Thu Sep  1 19:19:48 2022 kern.info kernel: [   19.190985] usb 1-2.2: new high-speed USB device number 5 using xhci-mtk
Thu Sep  1 19:19:48 2022 kern.info kernel: [   19.405570] cdc_ether 1-2.2:1.0 eth1: register 'cdc_ether' at usb-1e1c0000.xhci-2.2, CDC Ethernet Device, 0c:5b:8f:27:9a:64
Thu Sep  1 19:19:48 2022 kern.info kernel: [   19.433079] usb-storage 1-2.2:1.2: USB Mass Storage device detected
Thu Sep  1 19:19:48 2022 kern.info kernel: [   19.461323] scsi host2: usb-storage 1-2.2:1.2
Thu Sep  1 19:19:48 2022 kern.info kernel: [   19.477112] mt7603e 0000:02:00.0: Firmware Version: ap_pcie
Thu Sep  1 19:19:48 2022 kern.info kernel: [   19.482897] mt7603e 0000:02:00.0: Build Time: 20160107100755
Thu Sep  1 19:19:48 2022 kern.info kernel: [   19.514986] mt7603e 0000:02:00.0: firmware init done
Thu Sep  1 19:19:48 2022 kern.debug kernel: [   19.703286] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Sep  1 19:19:48 2022 kern.info kernel: [   19.733800] mt7621-pci 1e140000.pcie: bus=3 slot=2 irq=26
Thu Sep  1 19:19:48 2022 kern.info kernel: [   19.739422] pci 0000:00:02.0: enabling device (0004 -> 0007)
Thu Sep  1 19:19:48 2022 kern.info kernel: [   19.745296] mt76x2e 0000:03:00.0: enabling device (0000 -> 0002)
Thu Sep  1 19:19:48 2022 kern.info kernel: [   19.751916] mt76x2e 0000:03:00.0: ASIC revision: 76120044
Thu Sep  1 19:19:48 2022 kern.info kernel: [   20.155714] mt76x2e 0000:03:00.0: ROM patch build: 20141115060606a
Thu Sep  1 19:19:48 2022 kern.info kernel: [   20.166152] mt76x2e 0000:03:00.0: Firmware Version: 0.0.00
Thu Sep  1 19:19:48 2022 kern.info kernel: [   20.171803] mt76x2e 0000:03:00.0: Build: 1
Thu Sep  1 19:19:48 2022 kern.info kernel: [   20.175978] mt76x2e 0000:03:00.0: Build Time: 201507311614____
Thu Sep  1 19:19:48 2022 kern.info kernel: [   20.198994] mt76x2e 0000:03:00.0: Firmware running!
Thu Sep  1 19:19:48 2022 kern.debug kernel: [   20.206099] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Thu Sep  1 19:19:48 2022 kern.info kernel: [   20.215888] usbcore: registered new interface driver mt76x2u
Thu Sep  1 19:19:48 2022 kern.info kernel: [   20.224980] usbcore: registered new interface driver pl2303
Thu Sep  1 19:19:48 2022 kern.info kernel: [   20.230970] usbserial: USB Serial support registered for pl2303
Thu Sep  1 19:19:48 2022 kern.info kernel: [   20.242662] PPP generic driver version 2.4.2
Thu Sep  1 19:19:48 2022 kern.info kernel: [   20.249554] NET: Registered protocol family 24
Thu Sep  1 19:19:48 2022 kern.info kernel: [   20.258913] usbcore: registered new interface driver rndis_host
Thu Sep  1 19:19:48 2022 user.info kernel: [   20.322216] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Sep  1 19:19:48 2022 kern.notice kernel: [   20.499594] scsi 2:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
Thu Sep  1 19:19:48 2022 kern.warn kernel: [   20.511658] sd 2:0:0:0: Power-on or device reset occurred
Thu Sep  1 19:19:48 2022 kern.notice kernel: [   20.521523] sd 2:0:0:0: [sda] Attached SCSI removable disk
Thu Sep  1 19:19:50 2022 daemon.info dnsmasq[2400]: Connected to system UBus
Thu Sep  1 19:19:50 2022 daemon.info dnsmasq[2400]: started, version 2.85 cachesize 150
Thu Sep  1 19:19:50 2022 daemon.info dnsmasq[2400]: DNS service limited to local subnets
Thu Sep  1 19:19:50 2022 daemon.info dnsmasq[2400]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Sep  1 19:19:50 2022 daemon.info dnsmasq[2400]: UBus support enabled: connected to system bus
Thu Sep  1 19:19:50 2022 daemon.info dnsmasq[2400]: using only locally-known addresses for domain test
Thu Sep  1 19:19:50 2022 daemon.info dnsmasq[2400]: using only locally-known addresses for domain onion
Thu Sep  1 19:19:50 2022 daemon.info dnsmasq[2400]: using only locally-known addresses for domain localhost
Thu Sep  1 19:19:50 2022 daemon.info dnsmasq[2400]: using only locally-known addresses for domain local
Thu Sep  1 19:19:50 2022 daemon.info dnsmasq[2400]: using only locally-known addresses for domain invalid
Thu Sep  1 19:19:50 2022 daemon.info dnsmasq[2400]: using only locally-known addresses for domain bind
Thu Sep  1 19:19:50 2022 daemon.info dnsmasq[2400]: using nameserver 192.168.180.1#53 for domain vpn
Thu Sep  1 19:19:50 2022 daemon.info dnsmasq[2400]: using only locally-known addresses for domain lan
Thu Sep  1 19:19:50 2022 daemon.warn dnsmasq[2400]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Thu Sep  1 19:19:50 2022 daemon.info dnsmasq[2400]: read /etc/hosts - 4 addresses
Thu Sep  1 19:19:50 2022 daemon.info dnsmasq[2400]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Sep  1 19:19:50 2022 authpriv.info dropbear[2567]: Not backgrounding
Thu Sep  1 19:19:52 2022 user.warn mwan3-init[2751]: invalid ipv6 address 0.0.0.0/0 specified for rule default_rule
Thu Sep  1 19:19:53 2022 user.notice : Added device handler type: bonding
Thu Sep  1 19:19:53 2022 user.notice : Added device handler type: 8021ad
Thu Sep  1 19:19:53 2022 user.notice : Added device handler type: 8021q
Thu Sep  1 19:19:53 2022 user.notice : Added device handler type: macvlan
Thu Sep  1 19:19:53 2022 user.notice : Added device handler type: veth
Thu Sep  1 19:19:53 2022 user.notice : Added device handler type: bridge
Thu Sep  1 19:19:53 2022 user.notice : Added device handler type: Network device
Thu Sep  1 19:19:53 2022 user.notice : Added device handler type: tunnel
Thu Sep  1 19:19:54 2022 daemon.notice wpa_supplicant[3017]: Successfully initialized wpa_supplicant
Thu Sep  1 19:19:56 2022 daemon.warn netifd: You have delegated IPv6-prefixes but haven't assigned them to any interface. Did you forget to set option ip6assign on your lan-interfaces?
Thu Sep  1 19:19:56 2022 kern.info kernel: [   29.906527] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
Thu Sep  1 19:19:56 2022 kern.info kernel: [   29.923176] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
Thu Sep  1 19:19:56 2022 kern.info kernel: [   29.931375] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Thu Sep  1 19:19:56 2022 kern.info kernel: [   29.938729] mt7530 mdio-bus:1f port0: configuring for phy/gmii link mode
Thu Sep  1 19:19:56 2022 kern.info kernel: [   29.947333] 8021q: adding VLAN 0 to HW filter on device port0
Thu Sep  1 19:19:56 2022 kern.info kernel: [   29.956337] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Sep  1 19:19:56 2022 kern.info kernel: [   29.963699] br-lan: port 1(port0) entered blocking state
Thu Sep  1 19:19:56 2022 kern.info kernel: [   29.969122] br-lan: port 1(port0) entered disabled state
Thu Sep  1 19:19:56 2022 kern.info kernel: [   29.975711] device port0 entered promiscuous mode
Thu Sep  1 19:19:56 2022 kern.info kernel: [   29.980521] device eth0 entered promiscuous mode
Thu Sep  1 19:19:56 2022 daemon.notice netifd: Interface 'lan' is enabled
Thu Sep  1 19:19:56 2022 daemon.notice netifd: Interface 'lan' is setting up now
Thu Sep  1 19:19:56 2022 daemon.notice netifd: Interface 'lan' is now up
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.014719] mt7530 mdio-bus:1f port1: configuring for phy/gmii link mode
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.030606] 8021q: adding VLAN 0 to HW filter on device port1
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.041003] br-lan: port 2(port1) entered blocking state
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.046425] br-lan: port 2(port1) entered disabled state
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.053059] device port1 entered promiscuous mode
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.070033] mt7530 mdio-bus:1f port2: configuring for phy/gmii link mode
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.077512] 8021q: adding VLAN 0 to HW filter on device port2
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.087150] br-lan: port 3(port2) entered blocking state
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.092621] br-lan: port 3(port2) entered disabled state
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.100121] device port2 entered promiscuous mode
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.117030] mt7530 mdio-bus:1f port3: configuring for phy/gmii link mode
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.124608] 8021q: adding VLAN 0 to HW filter on device port3
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.134644] br-lan: port 4(port3) entered blocking state
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.140192] br-lan: port 4(port3) entered disabled state
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.147705] device port3 entered promiscuous mode
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.166201] mt7530 mdio-bus:1f port4: configuring for phy/gmii link mode
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.173706] 8021q: adding VLAN 0 to HW filter on device port4
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.183699] br-lan: port 5(port4) entered blocking state
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.189212] br-lan: port 5(port4) entered disabled state
Thu Sep  1 19:19:56 2022 kern.info kernel: [   30.196911] device port4 entered promiscuous mode
Thu Sep  1 19:19:56 2022 daemon.notice netifd: Interface 'loopback' is enabled
Thu Sep  1 19:19:56 2022 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Sep  1 19:19:56 2022 daemon.notice netifd: Interface 'loopback' is now up
Thu Sep  1 19:19:56 2022 daemon.notice netifd: Interface 'wan' is enabled
Thu Sep  1 19:19:56 2022 daemon.notice netifd: Interface 'wan' is setting up now
Thu Sep  1 19:19:56 2022 daemon.notice netifd: Network device 'eth0' link is up
Thu Sep  1 19:19:56 2022 daemon.notice netifd: Network device 'lo' link is up
Thu Sep  1 19:19:56 2022 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Sep  1 19:19:56 2022 daemon.notice netifd: Network device 'eth1' link is up
Thu Sep  1 19:19:56 2022 daemon.notice netifd: Interface 'wan' has link connectivity
Thu Sep  1 19:19:56 2022 daemon.notice netifd: wan (3490): udhcpc: started, v1.33.2
Thu Sep  1 19:20:56 2022 kern.err kernel: [   90.250839] rcu: INFO: rcu_sched self-detected stall on CPU
Thu Sep  1 19:20:56 2022 kern.err kernel: [   90.256426] rcu:   0-....: (14999 ticks this GP) idle=166/1/0x40000002 softirq=2638/2642 fqs=6499
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.265254]       (t=15000 jiffies g=2785 q=7838)
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.269505] NMI backtrace for cpu 0
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.272981] CPU: 0 PID: 76 Comm: kworker/0:1 Not tainted 5.4.188 #0
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.279278] Workqueue: events usbnet_change_mtu [usbnet]
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.284564] Stack : 80652b2c 8fc0dd24 806d0000 80720000 8fdca900 80664ae4 00000000 80658970
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.292885]         8071a2d0 80720000 00000000 8007e6d0 00000000 00000001 8fc0dce0 544a21f8
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.301204]         00000000 00000000 00000000 00000000 0000005d 00000191 6e616863 6d5f6567
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.309522]         00000000 00000004 00000000 000442ee 00000000 80740000 00000000 00000000
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.317840]         80658970 8071a2d0 80720000 00000000 00000003 8035c2a0 00000000 80870000
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.326159]         ...
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.328593] Call Trace:
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.331052] [<8000b64c>] show_stack+0x30/0x100
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.335513] [<805a6620>] dump_stack+0xa4/0xdc
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.339861] [<805aca84>] nmi_cpu_backtrace+0xe4/0x134
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.344890] [<805acc30>] nmi_trigger_cpumask_backtrace+0x15c/0x194
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.351069] [<8008e2e8>] rcu_dump_cpu_stacks+0xe0/0x12c
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.356277] [<80092f70>] rcu_sched_clock_irq+0x6e0/0x948
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.361580] [<800981f4>] update_process_times+0x2c/0x78
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.366808] [<800aa7b4>] tick_handle_periodic+0x34/0xd0
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.372023] [<803f20f0>] gic_compare_interrupt+0x7c/0x9c
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.377311] [<80085878>] handle_percpu_devid_irq+0xbc/0x19c
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.382874] [<8007f728>] generic_handle_irq+0x40/0x58
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.387924] [<802fcc1c>] gic_handle_local_int+0x98/0x120
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.393212] [<802fce68>] gic_irq_dispatch+0x10/0x20
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.398066] [<8007f728>] generic_handle_irq+0x40/0x58
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.403120] [<805c6fb4>] do_IRQ+0x1c/0x2c
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.407112] [<802fc6c4>] plat_irq_dispatch+0x64/0x104
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.412142] [<80006d08>] except_vec_vi_end+0xb8/0xc4
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.417085] [<805aa5f8>] kobject_put+0x3c/0x164
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.421719] [<8f1c9590>] usb_hcd_unlink_urb+0xb0/0xd4 [usbcore]
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.427645] [<8e3a8e34>] usbnet_status_stop+0xdc/0x204 [usbnet]
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.433550] [<8e3a9310>] usbnet_link_change+0x9c/0x104 [usbnet]
Thu Sep  1 19:20:56 2022 kern.warn kernel: [   90.439455] [<8e3aa6ac>] usbnet_change_mtu+0x49c/0xa80 [usbnet]
Thu Sep  1 19:21:30 2022 kern.err kernel: [  124.102873] rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... } 15506 jiffies s: 33 root: 0x1/.
Thu Sep  1 19:21:30 2022 kern.err kernel: [  124.113332] rcu: blocking rcu_node structures:
Thu Sep  1 19:21:30 2022 kern.info kernel: [  124.117805] Task dump for CPU 0:
Thu Sep  1 19:21:30 2022 kern.info kernel: [  124.121051] kworker/0:1     R  running task        0    76      2 0x00100004
Thu Sep  1 19:21:30 2022 kern.info kernel: [  124.128173] Workqueue: events usbnet_change_mtu [usbnet]
Thu Sep  1 19:21:30 2022 kern.warn kernel: [  124.133501] Stack : 8fe03d0c 80044924 00000000 00000001 00000001 00000000 00000000 00000000
Thu Sep  1 19:21:30 2022 kern.warn kernel: [  124.141871]         8fedf1b8 fffffff5 00000004 80044f4c 00000004 8fe0d190 8fedf178 00000001
Thu Sep  1 19:21:30 2022 kern.warn kernel: [  124.150234]         00000000 00000000 00000001 8fedf148 8e755400 8fedf1ac 00000000 00000000
Thu Sep  1 19:21:30 2022 kern.warn kernel: [  124.158598]         8fedf178 8f3cb0cc 8e7b1480 00000190 8fe0d1b4 00000190 00000a20 ffff58ef
Thu Sep  1 19:21:30 2022 kern.warn kernel: [  124.166968]         00000000 00000001 8e0abc00 00000001 8f1e21e4 00000001 8f3d7838 806d0000
Thu Sep  1 19:21:30 2022 kern.warn kernel: [  124.175347]         ...
Thu Sep  1 19:21:30 2022 kern.warn kernel: [  124.177787] Call Trace:
Thu Sep  1 19:21:30 2022 kern.warn kernel: [  124.180278] [<805c20e8>] __schedule+0x4f8/0x638
Thu Sep  1 19:23:56 2022 kern.err kernel: [  270.262889] rcu: INFO: rcu_sched self-detected stall on CPU
Thu Sep  1 19:23:56 2022 kern.err kernel: [  270.268479] rcu:   0-....: (60002 ticks this GP) idle=166/1/0x40000004 softirq=2638/2642 fqs=25497
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.277392]       (t=60003 jiffies g=2785 q=7907)
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.281643] NMI backtrace for cpu 0
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.285120] CPU: 0 PID: 76 Comm: kworker/0:1 Not tainted 5.4.188 #0
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.291413] Workqueue: events usbnet_change_mtu [usbnet]
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.296699] Stack : 80652b2c 8fc0dbcc 806d0000 80720000 8fdca900 80664ae4 00000000 80658970
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.305020]         8071a2d0 80720000 00000000 8007e6d0 00000000 00000001 8fc0db88 544a21f8
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.313339]         00000000 00000000 00000000 00000000 0000005d 000001c1 6e616863 6d5f6567
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.321657]         00000000 0000000d 00000000 00047255 00000000 80740000 00000000 00000000
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.329976]         80658970 8071a2d0 80720000 00000000 00000003 8035c2a0 00000000 80870000
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.338295]         ...
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.340729] Call Trace:
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.343191] [<8000b64c>] show_stack+0x30/0x100
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.347649] [<805a6620>] dump_stack+0xa4/0xdc
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.351998] [<805aca84>] nmi_cpu_backtrace+0xe4/0x134
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.357027] [<805acc30>] nmi_trigger_cpumask_backtrace+0x15c/0x194
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.363204] [<8008e2e8>] rcu_dump_cpu_stacks+0xe0/0x12c
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.368412] [<80092f70>] rcu_sched_clock_irq+0x6e0/0x948
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.373715] [<800981f4>] update_process_times+0x2c/0x78
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.378940] [<800aa7b4>] tick_handle_periodic+0x34/0xd0
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.384153] [<803f20f0>] gic_compare_interrupt+0x7c/0x9c
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.389441] [<80085878>] handle_percpu_devid_irq+0xbc/0x19c
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.395005] [<8007f728>] generic_handle_irq+0x40/0x58
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.400055] [<802fcc1c>] gic_handle_local_int+0x98/0x120
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.405342] [<802fce68>] gic_irq_dispatch+0x10/0x20
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.410199] [<8007f728>] generic_handle_irq+0x40/0x58
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.415252] [<805c6fb4>] do_IRQ+0x1c/0x2c
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.419244] [<802fc6c4>] plat_irq_dispatch+0x64/0x104
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.424274] [<80006d08>] except_vec_vi_end+0xb8/0xc4
Thu Sep  1 19:23:56 2022 kern.warn kernel: [  270.429245] [<80030b98>] irq_exit+0x98/0xb0
Thu Sep  1 19:24:42 2022 kern.err kernel: [  316.614940] rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... } 63634 jiffies s: 33 root: 0x1/.
Thu Sep  1 19:24:42 2022 kern.err kernel: [  316.625405] rcu: blocking rcu_node structures:
Thu Sep  1 19:24:42 2022 kern.info kernel: [  316.629885] Task dump for CPU 0:
Thu Sep  1 19:24:43 2022 kern.info kernel: [  316.633145] kworker/0:1     R  running task        0    76      2 0x00100004
Thu Sep  1 19:24:43 2022 kern.info kernel: [  316.640267] Workqueue: events usbnet_change_mtu [usbnet]
Thu Sep  1 19:24:43 2022 kern.warn kernel: [  316.645595] Stack : 8fe03d0c 80044924 00000000 00000001 00000001 00000000 00000000 00000000
Thu Sep  1 19:24:43 2022 kern.warn kernel: [  316.653962]         8fedf1b8 fffffff5 00000004 80044f4c 00000004 8fe0d190 8fedf178 00000001
Thu Sep  1 19:24:43 2022 kern.warn kernel: [  316.662335]         8f3d7838 8d734180 00000000 00003c00 ffffffef 00001800 00000000 00000000
Thu Sep  1 19:24:43 2022 kern.warn kernel: [  316.670708]         8f3d7838 806d0000 00000000 00003c00 ffffffef 00001800 00000001 f61b22aa
Thu Sep  1 19:24:43 2022 kern.warn kernel: [  316.679088]         00000001 8e7b1638 00000010 8f3c126c 00000000 8f3c8760 8fe02000 8fe03d88
Thu Sep  1 19:24:43 2022 kern.warn kernel: [  316.687453]         ...
Thu Sep  1 19:24:43 2022 kern.warn kernel: [  316.689894] Call Trace:
Thu Sep  1 19:24:43 2022 kern.warn kernel: [  316.692381] [<805c20e8>] __schedule+0x4f8/0x638
Thu Sep  1 19:26:56 2022 kern.err kernel: [  450.274907] rcu: INFO: rcu_sched self-detected stall on CPU
Thu Sep  1 19:26:56 2022 kern.err kernel: [  450.280498] rcu:   0-....: (105005 ticks this GP) idle=166/1/0x40000004 softirq=2638/2642 fqs=44216
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.289497]       (t=105006 jiffies g=2785 q=8405)
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.293834] NMI backtrace for cpu 0
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.297311] CPU: 0 PID: 76 Comm: kworker/0:1 Not tainted 5.4.188 #0
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.303607] Workqueue: events usbnet_change_mtu [usbnet]
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.308893] Stack : 80652b2c 8fc0dbcc 806d0000 80720000 8fdca900 80664ae4 00000000 80658970
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.317214]         8071a2d0 80720000 00000000 8007e6d0 00000000 00000001 8fc0db88 544a21f8
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.325533]         00000000 00000000 00000000 00000000 0000005d 000001ed 6e616863 6d5f6567
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.333852]         00000000 00000016 00000000 0004a1f7 00000000 80740000 00000000 00000000
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.342170]         80658970 8071a2d0 80720000 00000000 00000003 8035c2a0 00000000 80870000
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.350489]         ...
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.352922] Call Trace:
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.355384] [<8000b64c>] show_stack+0x30/0x100
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.359845] [<805a6620>] dump_stack+0xa4/0xdc
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.364194] [<805aca84>] nmi_cpu_backtrace+0xe4/0x134
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.369223] [<805acc30>] nmi_trigger_cpumask_backtrace+0x15c/0x194
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.375400] [<8008e2e8>] rcu_dump_cpu_stacks+0xe0/0x12c
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.380608] [<80092f70>] rcu_sched_clock_irq+0x6e0/0x948
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.385911] [<800981f4>] update_process_times+0x2c/0x78
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.391136] [<800aa7b4>] tick_handle_periodic+0x34/0xd0
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.396350] [<803f20f0>] gic_compare_interrupt+0x7c/0x9c
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.401637] [<80085878>] handle_percpu_devid_irq+0xbc/0x19c
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.407202] [<8007f728>] generic_handle_irq+0x40/0x58
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.412251] [<802fcc1c>] gic_handle_local_int+0x98/0x120
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.417539] [<802fce68>] gic_irq_dispatch+0x10/0x20
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.422395] [<8007f728>] generic_handle_irq+0x40/0x58
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.427448] [<805c6fb4>] do_IRQ+0x1c/0x2c
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.431441] [<802fc6c4>] plat_irq_dispatch+0x64/0x104
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.436472] [<80006d08>] except_vec_vi_end+0xb8/0xc4
Thu Sep  1 19:26:56 2022 kern.warn kernel: [  450.441442] [<80030b98>] irq_exit+0x98/0xb0
Thu Sep  1 19:27:43 2022 kern.err kernel: [  496.838917] rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... } 108690 jiffies s: 33 root: 0x1/.
Thu Sep  1 19:27:43 2022 kern.err kernel: [  496.849464] rcu: blocking rcu_node structures:
Thu Sep  1 19:27:43 2022 kern.info kernel: [  496.853926] Task dump for CPU 0:
Thu Sep  1 19:27:43 2022 kern.info kernel: [  496.857178] kworker/0:1     R  running task        0    76      2 0x00100004
Thu Sep  1 19:27:43 2022 kern.info kernel: [  496.864302] Workqueue: events usbnet_change_mtu [usbnet]
Thu Sep  1 19:27:43 2022 kern.warn kernel: [  496.869633] Stack : 8fe03d0c 80044924 00000000 00000001 00000001 00000000 00000000 00000000
Thu Sep  1 19:27:43 2022 kern.warn kernel: [  496.878000]         8fedf1b8 fffffff5 00000000 00000001 00000004 8fe0d190 8fedf178 00000001
Thu Sep  1 19:27:43 2022 kern.warn kernel: [  496.886362]         8f3d7838 8e755f80 00000000 00003c00 ffffffef 00001800 00000001 f61b22aa
Thu Sep  1 19:27:43 2022 kern.warn kernel: [  496.894731]         8fedf178 8f3cb0cc 8e7b1080 00000190 8fe0d1b4 00000190 00000a20 0000c4ef
Thu Sep  1 19:27:43 2022 kern.warn kernel: [  496.903098]         8d734e00 00000190 00000000 8f3cb904 00000000 8f3cdd2c 8fe02000 8fe03d88
Thu Sep  1 19:27:43 2022 kern.warn kernel: [  496.911477]         ...
Thu Sep  1 19:27:43 2022 kern.warn kernel: [  496.913924] Call Trace:
Thu Sep  1 19:27:43 2022 kern.warn kernel: [  496.916411] [<805c20e8>] __schedule+0x4f8/0x638
Thu Sep  1 19:28:31 2022 daemon.info procd: Instance network::instance1 pid 3089 not stopped on SIGTERM, sending SIGKILL instead

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 117,012

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

Wywalił ci się kernel. Zgłoś to na https://github.com/openwrt/openwrt/issues

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez tinware

  • Skąd: Warszawa
  • Zarejestrowany: 2018-10-06
  • Posty: 617

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

Znalazłem podobny temat u Ciebie na forum:
https://eko.one.pl/forum/viewtopic.php?id=21822

Zastanawiam się, czy samemu nie skopałem sprawy.

Przy wymianie kości zrobiłem tak:
1. zgrałem flash 16MB do pliku SOP-8
2. nagrałem z pliku na kość 64MB SOP-16
3. Flash się nie zwiększył, więc nagrałem wersje sysupgrade "64mb"
4. Potem własny firmware

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 117,012

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

Tamten wątek nie ma nic wspólnego z tym że kernel Ci się wyłożył.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez tinware (edytowany przez tinware 2022-09-04 20:13:40)

  • Skąd: Warszawa
  • Zarejestrowany: 2018-10-06
  • Posty: 617

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

Podłączyłem drugą taką samą płytę, z tym samym firmware i okazuje się, że tam działa wszystko dobrze. Płyta nie jest w obudowie, nie ma dołączonego huba usb, przetwornicy step-down, ma inne karty WiFi. Podłączyłem oba routery pod taki dogniazdkowy włącznik/wyłącznik i strzelam zasilaniem - cyklicznie włączam na 2 minuty, wyłączam na 1 minute, skryptem z komputera loguje czy działa czy nie działa. W ten sposób zamieniając wszystkie komponenty próbuje wyłapać co jest przyczyną tego problemu - obudowa, płyta pcb, przetwornica, hub usb, przejściówka minipcie-usb, modem usb, karty wifi 2x.

Czy po samym logu jesteś w stanie mi coś zasugerować, gdzie szukać przyczyny?

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 117,012

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

Workqueue: events usbnet_change_mtu [usbnet]

Poleciało coś związane z siecią na usb, choć nie wiem czy to mtu to akurat nie przypadek.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez tinware

  • Skąd: Warszawa
  • Zarejestrowany: 2018-10-06
  • Posty: 617

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

usbnet - zapewne chodzi o mój modem lte e3372h, ale pamiętam, że robiłem też test bez niego i tak samo nie miałem komunikacji po uruchomieniu. Fakt, nie sprawdzałem wtedy loga po UART. No nic, porównuje i szukam dalej smile

8 Odpowiedź przez tinware (edytowany przez tinware 2022-09-05 01:34:14)

  • Skąd: Warszawa
  • Zarejestrowany: 2018-10-06
  • Posty: 617

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

To chyba problem z nowymi Flashami, druga płyta która była sprawna też zaczyna mieć problemy z uruchamianiem się

▒▒▒▒▒▒f▒▒fx▒f▒ff~`▒▒▒xxf▒▒▒▒▒▒▒▒▒▒f▒▒▒f▒▒h▒r▒¢▒▒▒▒printk: console [ttyS0] enabled
[    0.884778] printk: console [ttyS0] enabled
[    0.893052] printk: bootconsole [early0] disabled
[    0.893052] printk: bootconsole [early0] disabled
[    0.905563] spi-mt7621 1e000b00.spi: sys_freq: 220000000
[    0.912174] spi-nor spi0.0: mx66l51235l (65536 Kbytes)
[    0.917409] 4 fixed-partitions partitions found on MTD device spi0.0
[    0.923778] Creating 4 MTD partitions on "spi0.0":
[    0.928579] 0x000000000000-0x000000030000 : "bootloader"
[    0.935398] 0x000000030000-0x000000040000 : "config"
[    0.941793] 0x000000040000-0x000000050000 : "factory"
[    0.948275] 0x000000050000-0x000001000000 : "firmware"
[    0.955013] 2 uimage-fw partitions found on MTD device firmware
[    0.960969] Creating 2 MTD partitions on "firmware":
[    0.965952] 0x000000000000-0x00000024290c : "kernel"
[    0.972300] 0x00000024290c-0x000000fb0000 : "rootfs"
[    0.978670] mtd: device 5 (rootfs) set to be root filesystem
[    0.984477] 1 squashfs-split partitions found on MTD device rootfs
[    0.990665] 0x0000004e0000-0x000000fb0000 : "rootfs_data"
[    1.026368] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    1.036301] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 22
[    1.046901] mt7621-pci 1e140000.pcie: Parsing DT failed
[    1.054924] NET: Registered protocol family 10
[    1.060964] Segment Routing with IPv6
[    1.064834] NET: Registered protocol family 17
[    1.069366] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.082540] 8021q: 802.1Q VLAN Support v1.8
[    1.089112] gpio-export gpio-export: 1 gpio(s) exported
[    1.094597] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    1.112168] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY]
[    1.122022] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY]
[    1.131868] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
[    1.141622] mt7530 mdio-bus:1f lan4 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
[    1.151498] mt7530 mdio-bus:1f wan (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY]
[    1.161237] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode
[    1.172459] DSA: tree 0 setup
[    1.175792] rt2880-pinmux pinctrl: pcie is already enabled
[    1.181422] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
[    1.189020] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
[    1.296439] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
[    1.302016] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
[    1.407524] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK)
[    1.414471] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
[    1.421421] mt7621-pci 1e140000.pcie: PCIE0 enabled
[    1.426296] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[    1.435766] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
[    1.442119] pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
[    1.448983] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    1.455848] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.461364] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    1.467392] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.473662] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    1.479993] pci 0000:00:00.0: supports D1
[    1.483999] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    1.491143] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.499343] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
[    1.505391] pci 0000:01:00.0: reg 0x10: [io  0x0000-0x0007]
[    1.510962] pci 0000:01:00.0: reg 0x14: [io  0x0000-0x0003]
[    1.516535] pci 0000:01:00.0: reg 0x18: [io  0x0000-0x0007]
[    1.522104] pci 0000:01:00.0: reg 0x1c: [io  0x0000-0x0003]
[    1.527677] pci 0000:01:00.0: reg 0x20: [io  0x0000-0x001f]
[    1.533247] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
[    1.539507] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.546322] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[    1.561400] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    1.566633] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    1.572720] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    1.579493] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff pref]
[    1.586705] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.593350] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    1.599962] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    1.606910] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    1.613690] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[    1.620901] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
[    1.627683] pci 0000:00:00.0: BAR 7: assigned [io  0x1e160000-0x1e160fff]
[    1.634464] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
[    1.641675] pci 0000:01:00.0: BAR 5: assigned [mem 0x60000000-0x600001ff]
[    1.648456] pci 0000:01:00.0: BAR 4: assigned [io  0x1e160000-0x1e16001f]
[    1.655234] pci 0000:01:00.0: BAR 0: assigned [io  0x1e160020-0x1e160027]
[    1.662017] pci 0000:01:00.0: BAR 2: assigned [io  0x1e160028-0x1e16002f]
[    1.668800] pci 0000:01:00.0: BAR 1: assigned [io  0x1e160030-0x1e160033]
[    1.675579] pci 0000:01:00.0: BAR 3: assigned [io  0x1e160034-0x1e160037]
[    1.682371] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.687330] pci 0000:00:00.0:   bridge window [io  0x1e160000-0x1e160fff]
[    1.694108] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    1.700885] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
[    1.708727] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off
[    1.709019] hctosys: unable to open rtc device (rtc0)
[    1.728589] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    1.740570] Freeing unused kernel memory: 1252K
[    1.745119] This architecture does not have kernel memory protection.
[    1.751540] Run /sbin/init as init process
[    2.430820] init: Console is alive
[    2.434513] init: - watchdog -
[    3.103924] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.238340] usbcore: registered new interface driver usbfs
[    3.243991] usbcore: registered new interface driver hub
[    3.249434] usbcore: registered new device driver usb
[    3.263390] SCSI subsystem initialized
[    3.282422] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=24
[    3.287911] pci 0000:00:00.0: enabling device (0004 -> 0007)
[    3.293570] ahci 0000:01:00.0: enabling device (0000 -> 0003)
[    3.299467] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[    3.306136] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    3.314232] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[    3.324694] scsi host0: ahci
[    3.328700] scsi host1: ahci
[    3.332150] ata1: SATA max UDMA/133 abar m512@0x60000000 port 0x60000100 irq 24
[    3.339466] ata2: SATA max UDMA/133 abar m512@0x60000000 port 0x60000180 irq 24
[    3.663659] ata1: SATA link down (SStatus 0 SControl 300)
[    3.983633] ata2: SATA link down (SStatus 0 SControl 300)
[    3.996375] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
[    4.005119] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
[    4.014094] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    4.019439] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[    4.035783] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000290010
[    4.045003] xhci-mtk 1e1c0000.xhci: irq 21, io mem 0x1e1c0000
[    4.052259] hub 1-0:1.0: USB hub found
[    4.056122] hub 1-0:1.0: 2 ports detected
[    4.060732] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    4.066076] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[    4.073568] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
[    4.080119] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.089072] hub 2-0:1.0: USB hub found
[    4.092981] hub 2-0:1.0: 1 port detected
[    4.138703] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.155984] init: - preinit -
[    5.039398] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[    5.047813] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    5.056299] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.280510] random: jshn: uninitialized urandom read (4 bytes read)
[    5.394562] random: jshn: uninitialized urandom read (4 bytes read)
[    5.433762] random: jshn: uninitialized urandom read (4 bytes read)
[    5.656623] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[    5.663719] 8021q: adding VLAN 0 to HW filter on device lan1
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    9.911342] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002d0000: 0xa9b7 instead
[    9.920831] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002d0004: 0xfb04 instead
[    9.930282] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002d0008: 0x98f8 instead
[    9.939735] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002d000c: 0xd84a instead
[    9.949186] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002d0010: 0xf15b instead
[    9.958635] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002d0014: 0x08ab instead
[    9.968089] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002d0018: 0xfee1 instead
[    9.977539] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002d001c: 0x0ec6 instead
[    9.986990] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002d0020: 0xa1e5 instead
[    9.996444] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002d0024: 0xe1bd instead
[   10.005899] jffs2: Further such events for this erase block will not be printed
[   10.018733] jffs2: Empty flash at 0x002d0100 ends at 0x002d0800
[   10.030393] jffs2: Empty flash at 0x002d1900 ends at 0x002d27a0
[   10.044771] jffs2: Empty flash at 0x002d36fc ends at 0x002d55b4
[   10.064745] jffs2: Empty flash at 0x002d6510 ends at 0x002da280
[   10.079114] jffs2: Empty flash at 0x002db1dc ends at 0x002dd094
[   10.093701] jffs2: Empty flash at 0x002def4c ends at 0x002dfe00
[   10.100029] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e0000: 0x73c4 instead
[   10.109483] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e0004: 0x8186 instead
[   10.118933] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e0008: 0xb4f4 instead
[   10.128388] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e000c: 0x9b84 instead
[   10.137838] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e0010: 0xca94 instead
[   10.147289] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e0014: 0x86a6 instead
[   10.156743] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e0018: 0x5138 instead
[   10.166203] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e001c: 0x3583 instead
[   10.175668] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e0020: 0xbbce instead
[   10.185122] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e0024: 0xf626 instead
[   10.194568] jffs2: Further such events for this erase block will not be printed
[   10.210297] jffs2: Empty flash at 0x002e0e04 ends at 0x002e2cbc
[   10.221909] jffs2: Empty flash at 0x002e3c18 ends at 0x002e4b74
[   10.236287] jffs2: Empty flash at 0x002e5ad0 ends at 0x002e7988
[   10.250645] jffs2: Empty flash at 0x002e88e4 ends at 0x002ea79c
[   10.270521] jffs2: Empty flash at 0x002eb6f8 ends at 0x002ef468
[   10.278387] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002f0000: 0xd6d2 instead
[   10.287845] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002f0004: 0x3faf instead
[   10.297302] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002f0008: 0x1115 instead
[   10.306753] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002f000c: 0xd7bf instead
[   10.316207] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002f0010: 0x8c8d instead
[   10.325657] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002f0014: 0x6832 instead
[   10.335107] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002f0018: 0x10c0 instead
[   10.344561] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002f001c: 0x31b2 instead
[   10.354011] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002f0020: 0xd64b instead
[   10.363460] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002f0024: 0x066d instead
[   10.372909] jffs2: Further such events for this erase block will not be printed
[   10.396747] jffs2: Empty flash at 0x002f03c4 ends at 0x002f5090
[   10.411108] jffs2: Empty flash at 0x002f6000 ends at 0x002f7ea4
[   10.430982] jffs2: Empty flash at 0x002f8e00 ends at 0x002fcb70
[   10.445599] jffs2: Empty flash at 0x002fea28 ends at 0x002ff984
[   10.452869] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00300000: 0x83ba instead
[   10.462323] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00300004: 0x3838 instead
[   10.471777] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00300008: 0xd903 instead
[   10.481227] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0030000c: 0x7892 instead
[   10.490677] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00300010: 0x22c7 instead
[   10.500132] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00300014: 0xc6c3 instead
[   10.509583] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00300018: 0x335e instead
[   10.519033] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0030001c: 0x0f69 instead
[   10.528487] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00300020: 0xe128 instead
[   10.537938] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00300024: 0x8fa7 instead
[   10.547383] jffs2: Further such events for this erase block will not be printed
[   10.563051] jffs2: Empty flash at 0x003008e0 ends at 0x00302798
[   10.604934] jffs2: Empty flash at 0x003036f4 ends at 0x0030ef44
[   10.612877] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00310000: 0x5026 instead
[   10.622335] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00310004: 0x1277 instead
[   10.631790] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00310008: 0x319f instead
[   10.641240] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0031000c: 0xb398 instead
[   10.650690] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00310010: 0x3edb instead
[   10.660147] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00310014: 0x89f4 instead
[   10.669609] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00310018: 0xd325 instead
[   10.679065] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0031001c: 0x6393 instead
[   10.688524] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00310020: 0x67ff instead
[   10.697975] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00310024: 0xb201 instead
[   10.707419] jffs2: Further such events for this erase block will not be printed

9 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 117,012

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

A tu coś źle wgrałeś (zostały śmieci we flash, flash nie został skasowany itd). Zrób firstboota, na najlepiej zrób mtd -r erase rootfs_data

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

10 Odpowiedź przez tinware

  • Skąd: Warszawa
  • Zarejestrowany: 2018-10-06
  • Posty: 617

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

Bo mam obawy, że te moje nowe Flashe to są "china quality", czyli podróbki. Wlutowałem do jednej płyty starego Flasha 16MB (tej wcześniej niby nie działającej, niestety mam w niej teraz OpenWRT v17) i porównuje przez noc.

Ta 16MB bez obudowy nie uruchomiła się 3 razy, a ta z flashem 64MB w obudowie przez noc nie podniosła się 54 razy hmm
Rano przełączyłem cykl 4 minuty włączone, 6 minut wyłączone - brak już pomysłów.
Wieczorem zamienię płyty na odwrót i sprawdzę.

11 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 117,012

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

W sumie to wszystkie kości są "chińskie" smile. Możesz ew kupić z tme czy innego mousera jakieś dobre jakościowo kości i zobaczyć.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

12 Odpowiedź przez tinware (edytowany przez tinware 2022-09-05 10:19:53)

  • Skąd: Warszawa
  • Zarejestrowany: 2018-10-06
  • Posty: 617

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

Tak, wiem właśnie. Na razie zrobię to o czym mówiłem, a kości jakich potrzebuje według producenta płyty to MX66L51235FMI-10G
lub MX25L51245GMI-08G.

13 Odpowiedź przez tinware (edytowany przez tinware 2022-09-05 15:33:42)

  • Skąd: Warszawa
  • Zarejestrowany: 2018-10-06
  • Posty: 617

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

Cykl - włączam na 4 minuty, wyłączam na 6 minut. 

1. Płyta ze starym flash 16MB, OpenWRT v17, jedną kartą Wi-Fi w trybie klient:
Wynik: bezbłędnie smile

2022-09-05 14:53:19 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 14:51:06 | Nawiazano polaczenie z 192.168.180.211 po 0:07:50s
2022-09-05 14:43:19 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 14:41:00 | Nawiazano polaczenie z 192.168.180.211 po 0:00:10s
2022-09-05 14:40:53 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 14:40:31 | Nawiazano polaczenie z 192.168.180.211 po 0:07:16s
2022-09-05 14:33:18 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 14:30:48 | Nawiazano polaczenie z 192.168.180.211 po 0:07:28s
2022-09-05 14:23:23 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 14:20:43 | Nawiazano polaczenie z 192.168.180.211 po 0:07:23s
2022-09-05 14:13:23 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 14:10:52 | Nawiazano polaczenie z 192.168.180.211 po 0:07:31s
2022-09-05 14:03:24 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 14:01:01 | Nawiazano polaczenie z 192.168.180.211 po 0:07:38s
2022-09-05 13:53:26 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 13:51:27 | Nawiazano polaczenie z 192.168.180.211 po 0:00:07s
2022-09-05 13:51:23 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 13:50:39 | Nawiazano polaczenie z 192.168.180.211 po 0:07:16s
2022-09-05 13:43:26 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 13:40:44 | Nawiazano polaczenie z 192.168.180.211 po 0:07:19s
2022-09-05 13:33:28 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 13:30:42 | Nawiazano polaczenie z 192.168.180.211 po 0:07:17s
2022-09-05 13:23:28 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 13:21:02 | Nawiazano polaczenie z 192.168.180.211 po 0:07:34s
2022-09-05 13:13:31 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 13:10:49 | Nawiazano polaczenie z 192.168.180.211 po 0:07:21s
2022-09-05 13:03:31 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 13:00:51 | Nawiazano polaczenie z 192.168.180.211 po 0:07:22s
2022-09-05 12:53:32 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 12:50:45 | Nawiazano polaczenie z 192.168.180.211 po 0:07:16s
2022-09-05 12:43:32 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 12:40:54 | Nawiazano polaczenie z 192.168.180.211 po 0:07:23s
2022-09-05 12:33:34 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 12:31:07 | Nawiazano polaczenie z 192.168.180.211 po 0:07:34s
2022-09-05 12:23:36 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 12:20:56 | Nawiazano polaczenie z 192.168.180.211 po 0:07:23s
2022-09-05 12:13:36 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 12:10:50 | Nawiazano polaczenie z 192.168.180.211 po 0:07:16s
2022-09-05 12:03:37 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 12:00:57 | Nawiazano polaczenie z 192.168.180.211 po 0:07:21s
2022-09-05 11:53:39 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 11:50:59 | Nawiazano polaczenie z 192.168.180.211 po 0:07:22s
2022-09-05 11:43:40 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 11:41:03 | Nawiazano polaczenie z 192.168.180.211 po 0:07:27s
2022-09-05 11:33:39 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 11:30:51 | Nawiazano polaczenie z 192.168.180.211 po 0:07:11s
2022-09-05 11:23:43 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 11:21:03 | Nawiazano polaczenie z 192.168.180.211 po 0:07:24s
2022-09-05 11:13:42 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 11:10:53 | Nawiazano polaczenie z 192.168.180.211 po 0:07:12s
2022-09-05 11:03:44 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 11:01:07 | Nawiazano polaczenie z 192.168.180.211 po 0:07:27s
2022-09-05 10:53:43 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 10:50:58 | Nawiazano polaczenie z 192.168.180.211 po 0:07:16s
2022-09-05 10:43:45 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 10:41:12 | Nawiazano polaczenie z 192.168.180.211 po 0:07:28s
2022-09-05 10:33:47 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 10:31:00 | Nawiazano polaczenie z 192.168.180.211 po 0:07:16s
2022-09-05 10:23:47 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 10:21:01 | Nawiazano polaczenie z 192.168.180.211 po 0:07:16s
2022-09-05 10:13:48 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 10:10:59 | Nawiazano polaczenie z 192.168.180.211 po 0:07:12s
2022-09-05 10:03:50 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 10:01:01 | Nawiazano polaczenie z 192.168.180.211 po 0:07:13s
2022-09-05 09:53:51 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 09:51:12 | Nawiazano polaczenie z 192.168.180.211 po 0:07:24s
2022-09-05 09:43:51 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 09:41:02 | Nawiazano polaczenie z 192.168.180.211 po 0:07:11s
2022-09-05 09:33:54 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 09:31:18 | Nawiazano polaczenie z 192.168.180.211 po 0:07:27s
2022-09-05 09:23:54 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 09:21:22 | Nawiazano polaczenie z 192.168.180.211 po 0:07:30s
2022-09-05 09:13:55 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 09:11:10 | Nawiazano polaczenie z 192.168.180.211 po 0:07:16s
2022-09-05 09:03:57 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 09:01:20 | Nawiazano polaczenie z 192.168.180.211 po 0:07:27s
2022-09-05 08:53:56 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 08:51:23 | Nawiazano polaczenie z 192.168.180.211 po 0:07:28s
2022-09-05 08:43:58 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 08:41:26 | Nawiazano polaczenie z 192.168.180.211 po 0:07:28s
2022-09-05 08:34:01 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 08:31:24 | Nawiazano polaczenie z 192.168.180.211 po 0:07:27s
2022-09-05 08:24:00 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 08:21:12 | Nawiazano polaczenie z 192.168.180.211 po 0:07:13s
2022-09-05 08:14:02 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 08:11:27 | Nawiazano polaczenie z 192.168.180.211 po 0:07:28s
2022-09-05 08:04:02 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 08:01:32 | Nawiazano polaczenie z 192.168.180.211 po 0:07:32s
2022-09-05 07:54:03 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 07:51:17 | Nawiazano polaczenie z 192.168.180.211 po 0:07:16s
2022-09-05 07:44:04 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 07:41:29 | Nawiazano polaczenie z 192.168.180.211 po 0:07:27s
2022-09-05 07:34:05 | Wykryto brak polaczenia z 192.168.180.211
2022-09-05 07:31:21 | Nawiazano polaczenie z 192.168.180.211 po 0:07:16s

2. Płyta z nowym flash 64MB, OpenWRT v21, w obudowie, dwie karty Wi-Fi, hub, przetwornica, modem lte:
Wynik: Nie uruchomiła się 18 razy

2022-09-05 14:43:19 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 14:40:23 | Nawiazano polaczenie z 192.168.180.204 po 0:17:04s
2022-09-05 14:23:22 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 14:20:29 | Nawiazano polaczenie z 192.168.180.204 po 0:07:10s
2022-09-05 14:13:22 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 14:10:35 | Nawiazano polaczenie z 192.168.180.204 po 0:17:11s
2022-09-05 13:53:27 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 13:51:26 | Nawiazano polaczenie z 192.168.180.204 po 0:00:06s
2022-09-05 13:51:23 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 13:50:35 | Nawiazano polaczenie z 192.168.180.204 po 0:17:11s
2022-09-05 13:33:27 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 13:30:32 | Nawiazano polaczenie z 192.168.180.204 po 0:07:06s
2022-09-05 13:23:29 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 13:20:34 | Nawiazano polaczenie z 192.168.180.204 po 0:37:04s
2022-09-05 12:43:33 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 12:40:37 | Nawiazano polaczenie z 192.168.180.204 po 0:07:06s
2022-09-05 12:33:34 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 12:30:41 | Nawiazano polaczenie z 192.168.180.204 po 0:27:08s
2022-09-05 12:03:36 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 12:00:43 | Nawiazano polaczenie z 192.168.180.204 po 0:07:08s
2022-09-05 11:53:38 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 11:51:04 | Nawiazano polaczenie z 192.168.180.204 po 0:07:27s
2022-09-05 11:43:40 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 11:40:43 | Nawiazano polaczenie z 192.168.180.204 po 0:07:07s
2022-09-05 11:33:39 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 11:31:05 | Nawiazano polaczenie z 192.168.180.204 po 0:07:27s
2022-09-05 11:23:41 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 11:20:45 | Nawiazano polaczenie z 192.168.180.204 po 0:07:05s
2022-09-05 11:13:43 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 11:10:50 | Nawiazano polaczenie z 192.168.180.204 po 0:07:09s
2022-09-05 11:03:44 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 11:01:03 | Nawiazano polaczenie z 192.168.180.204 po 0:00:10s
2022-09-05 11:00:56 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 11:00:45 | Nawiazano polaczenie z 192.168.180.204 po 0:07:05s
2022-09-05 10:53:43 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 10:51:06 | Nawiazano polaczenie z 192.168.180.204 po 0:00:13s
2022-09-05 10:50:56 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 10:50:45 | Nawiazano polaczenie z 192.168.180.204 po 0:46:57s
2022-09-05 10:03:51 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 10:01:01 | Nawiazano polaczenie z 192.168.180.204 po 0:17:11s
2022-09-05 09:43:53 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 09:40:57 | Nawiazano polaczenie z 192.168.180.204 po 0:07:08s
2022-09-05 09:33:52 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 09:30:56 | Nawiazano polaczenie z 192.168.180.204 po 0:07:06s
2022-09-05 09:23:53 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 09:20:58 | Nawiazano polaczenie z 192.168.180.204 po 0:17:04s
2022-09-05 09:03:57 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 09:01:17 | Nawiazano polaczenie z 192.168.180.204 po 0:00:13s
2022-09-05 09:01:07 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 09:00:56 | Nawiazano polaczenie z 192.168.180.204 po 0:26:59s
2022-09-05 08:34:00 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 08:31:20 | Nawiazano polaczenie z 192.168.180.204 po 0:00:12s
2022-09-05 08:31:11 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 08:31:00 | Nawiazano polaczenie z 192.168.180.204 po 0:17:01s
2022-09-05 08:14:02 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 08:11:06 | Nawiazano polaczenie z 192.168.180.204 po 0:17:04s
2022-09-05 07:54:05 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 07:51:09 | Nawiazano polaczenie z 192.168.180.204 po 0:07:07s
2022-09-05 07:44:05 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 07:41:09 | Nawiazano polaczenie z 192.168.180.204 po 0:07:05s
2022-09-05 07:34:07 | Wykryto brak polaczenia z 192.168.180.204
2022-09-05 07:31:15 | Nawiazano polaczenie z 192.168.180.204 po 0:07:10s

Zamienię teraz płyty i ponownie przetestuję. A flash z TME w bajońskiej cenie już w drodze smile

14 Odpowiedź przez tinware

  • Skąd: Warszawa
  • Zarejestrowany: 2018-10-06
  • Posty: 617

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

I zamieniłem płyty miejscami. Płyta z 16MB w obudowie nie uruchomiła się 2 razy, a ta z 64MB 5 razy przez 15 godzin strzelania prądem. A kilka dni temu były też sytuację, że po 5-10 razy ręcznie musiałem resetować prądem, bo nie mogłem uruchomić routera po zaniku zasilania. Ciężka sprawa będzie znaleźć przyczynę, ale dzisiaj będę miał nowy flash i mam nadzieję, że to rozwiąże sprawę. W końcu od wymiany tych flashy cały problem się zaczął dziać.

15 Odpowiedź przez tinware

  • Skąd: Warszawa
  • Zarejestrowany: 2018-10-06
  • Posty: 617

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

Niestety, po wymianie kości jest to samo. Spróbować przesiąść się na v22?

16 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 117,012

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

Nie masz nic do stracenia...

PS. Jeszcze jedno - jeżeli sam kompilujesz soft to zmniejsz spi-max-frequency na coś mniejszego.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

17 Odpowiedź przez tinware

  • Skąd: Warszawa
  • Zarejestrowany: 2018-10-06
  • Posty: 617

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

W którym miejscu to znajdę?

18 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 117,012

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

W źródłach: target/linux/ramips/dts jeden z plików mt7621_unielec_u7621-* w zależności z którego obrazu korzystasz. Bo używasz unieleca, tak?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

19 Odpowiedź przez tinware

  • Skąd: Warszawa
  • Zarejestrowany: 2018-10-06
  • Posty: 617

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

Tak, tak - u7621-06

20 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 117,012

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

Więc to do zmiany: https://github.com/openwrt/openwrt/blob … 4m.dts#L22 jeżeli używasz 64m

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

21 Odpowiedź przez tinware (edytowany przez tinware 2022-09-06 21:12:12)

  • Skąd: Warszawa
  • Zarejestrowany: 2018-10-06
  • Posty: 617

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

Dla kości 16MB (128mb):

spi-max-frequency = <14000000>;

Dla kości 64MB (512mb):

spi-max-frequency = <10000000>;

Co ustawić dla 64MB?
P.S.: Wypaliłem sobie też system na 16MB, brakuje co prawda w nim jakiejś Samby, którą mam w firmware dla kości 64MB, ale można to porównać jak działa

22 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 117,012

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

Np. 5000000? Będzie dość wolny ten flash, ale będziesz widział czy to kwestia taktowania flash czy nie.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

23 Odpowiedź przez tinware (edytowany przez tinware 2022-09-06 21:22:29)

  • Skąd: Warszawa
  • Zarejestrowany: 2018-10-06
  • Posty: 617

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

Ok, kompiluje się. Jedyne co zauważyłem, to problem pojawia się po dłuższym postoju routera. Tak jak teraz od razu po ograniu kości, 5 razy go próbowałem uruchomić, aż w końcu zadziałał.

Mam jeszcze pomysł nagrać na tą kość 64MB moją starą kompilację v17 16MB.

24 Odpowiedź przez tinware

  • Skąd: Warszawa
  • Zarejestrowany: 2018-10-06
  • Posty: 617

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

make[6]: *** [CMakeFiles/blobmsg_json.dir/build.make:82: CMakeFiles/blobmsg_json.dir/blobmsg_json.c.o] Error 1
make[6]: Leaving directory '/root/OpenWRT/u7621-06_v21.02.3_64MB_compilator/build_dir/hostpkg/libubox-2021-05-16-b14c4688'
make[5]: *** [CMakeFiles/Makefile2:228: CMakeFiles/blobmsg_json.dir/all] Error 2
make[5]: Leaving directory '/root/OpenWRT/u7621-06_v21.02.3_64MB_compilator/build_dir/hostpkg/libubox-2021-05-16-b14c4688'
make[4]: *** [Makefile:149: all] Error 2
make[4]: Leaving directory '/root/OpenWRT/u7621-06_v21.02.3_64MB_compilator/build_dir/hostpkg/libubox-2021-05-16-b14c4688'
make[3]: *** [Makefile:114: /root/OpenWRT/u7621-06_v21.02.3_64MB_compilator/build_dir/hostpkg/libubox-2021-05-16-b14c4688/.built] Error 2
make[3]: Leaving directory '/root/OpenWRT/u7621-06_v21.02.3_64MB_compilator/package/libs/libubox'
time: package/libs/libubox/host-compile#11.04#2.46#13.34
    ERROR: package/libs/libubox [host] failed to build.
make[2]: *** [package/Makefile:114: package/libs/libubox/host/compile] Error 1
make[2]: Leaving directory '/root/OpenWRT/u7621-06_v21.02.3_64MB_compilator'
make[1]: *** [package/Makefile:110: /root/OpenWRT/u7621-06_v21.02.3_64MB_compilator/staging_dir/target-mipsel_24kc_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/root/OpenWRT/u7621-06_v21.02.3_64MB_compilator'
make: *** [/root/OpenWRT/u7621-06_v21.02.3_64MB_compilator/include/toplevel.mk:230: world] Błąd 2

Tak zakończyła się kompilacja zmiany spi-max-frequency

25 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 117,012

Odp: OpenWRT losowo się nie uruchamia (brak komunikacji)

Tylko że do kompilacji dts to on jeszcze nie dotarł. Usuń build_dir/hostpkg/libubox-2021-05-16-b14c4688 i ponów kompilację.

Ps. nie powinieneś kompilować jako root, kompilacja dobrze idzie ze zwykłego usera.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona