• Zarejestrowany: 2016-07-17
  • Posty: 99

Temat: Openvpn, wolne transfery

Mam premium vpn od windscribe które po 8 godzinach walki z routerem skonfigurowałem pod openvpn na wiekowym routerze tplink wr842nd v1 z zainstalowanym openwrt.

Próbowałem 2 różne konfingi z dwoma różnymi serwerami i router max co wyciąga na download i upload zarówno na wifi oraz po kablu to 6 - 7Mbps, gdzie speedtest bez włączonego vpn w ustawieniach routera osiągaja po 45 - 47 Mbps downloadu, czyli max mojego łącza.

Czy jest to spowodowane limitem routera? Czytałem że korzystanie z vpn na routerze potrafi znacznie obciążyć cpu, ale podczas włączonego vpn i speedtestu, w logach procek praktycznie odpoczywa...

Config:

client
dev tun
proto udp
remote es.windscribe.com 443

nobind
auth-user-pass /etc/openvpn/windscribe.auth

resolv-retry infinite

auth SHA512
cipher AES-256-CBC
comp-lzo
verb 2
mute-replay-warnings
remote-cert-tls server
persist-key
persist-tun

reneg-sec 432000
resolv-retry infinite

key-direction 1

reneg-sec 432000
resolv-retry infinite

2 Odpowiedź przez ambrozy5

  • Zarejestrowany: 2015-01-27
  • Posty: 2,429

Odp: Openvpn, wolne transfery

to wolny procesor ale możesz mu ulżyć wyłączając kompresje i uzyć slabszego szyfrowania, inną opcją na lepszą jest wireguard

Dom : router https://i.imgur.com/IuB6Zwy.png | TP-LINK T1700G-28TQ |Zyxel XGS-1210-12 | 6x Ruckus r310 unleashed  + Ruckus icx7150-c12p | Truenas scale 124TB 25Gb| Xpenology 12TB | apc smart ups 750 lcd smile 100Mb/s - 25Gb/s
Podróżne : GL.Inet MT3000  +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip  + panel 285Wp + lifepo4 12v 60Ah .

3 Odpowiedź przez misiek735

  • Zarejestrowany: 2016-07-17
  • Posty: 99

Odp: Openvpn, wolne transfery

Zarówno na szyfrowaniu aes-cbc jak i aes-gcm transfery są słabe. Myślisz że TCP było by lepsze aniżeli UDP?

Jak wyłączyć kompresję? Nie jestem aż tak obeznany w tych sprawach.

Niestety ale wireguard nie jest wspierany przez windscribe. Chyba że jest jakiś specjalny sposób konfiguracji?

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,055

Odp: Openvpn, wolne transfery

wireguard to inny protokół. Jak nie wspiera to nie możesz skonfigurować.

I tak, masz słaby procek tam, możesz po prostu więcej nie osiągnąć.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez misiek735

  • Zarejestrowany: 2016-07-17
  • Posty: 99

Odp: Openvpn, wolne transfery

Kurcze, szkoda. Mam jeszcze w szufladzie tplinka mr3220 v2 ale to ten sam dziadek z prockiem 1 core 400 MHz, więc wątpię aby cokolwiek to dało

6 Odpowiedź przez sebastan

  • Zarejestrowany: 2012-10-05
  • Posty: 452

Odp: Openvpn, wolne transfery

Moja rada jest taka, by pomyśleć o nowej inwestycji. Wiem, ze różnie w życiu bywa i nieraz nie ma miejsca na inwestycje, ale koszt może być niewielki a różnica wielka.

7 Odpowiedź przez misiek735

  • Zarejestrowany: 2016-07-17
  • Posty: 99

Odp: Openvpn, wolne transfery

Nie no jasne, z tym to problemu nie mam. Kwestia tylko taka że najpierw wziąłem to co mam w szufladach. Jak się nie da to się kupi lepsze smile

W sumie to vpna zacząłem stawiać specjalnie ze względu na to że dziewczynie zachciało się Netflixa w TV. Więc kupiłem roczną subskrypcję, a że router od ponad roku działa nieprzerwanie to stwierdziłem że czemu by nie spróbować dograć openvpna, no i tu zaczęła się zabawa.

A tak z innej beczki to co sądzisz o xiaomi router? W sumie to u rodziców mam od daaawna xiaomi router r3 (bez portów giga), i mimo tego że jak go kupiłem to nie było żadnego openwrt to jestem zadowolony. Myślisz że xiaomi router 4 styknie jako inwestycja na kolejne lata czy lepiej zainwestować w sprawdzony r3g?

8 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,055

Odp: Openvpn, wolne transfery

R3G to teraz ze świeczką możesz szukać. Spóźniłeś z tym tak o rok.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

9 Odpowiedź przez sebastan

  • Zarejestrowany: 2012-10-05
  • Posty: 452

Odp: Openvpn, wolne transfery

Sam mam dwa R3G, co bym nie cudował, to problemu nie mam z nimi. Na jednym z gargoyle pracuje openvpn, wireguard, adguard.  Sprzętów o zbliżonej wydajności jest więcej za nieduże pieniądze, a dlatego radzę nową inwestycję,  że sam z doświadczenia wiem, że zawsze kiedy zwlekałem, to jak już się zdecydowałem, to pierwsza myśl była "dlaczego tak późno".

A moja szuflada też nie taka skromna, leży w piwnicy już WNDR4300, WDR3600, B525, NETGEAR810s, teraz mam dwa MIR3G, a w drodze do mnie AX3600.

10 Odpowiedź przez misiek735

  • Zarejestrowany: 2016-07-17
  • Posty: 99

Odp: Openvpn, wolne transfery

Ehhh to nazewnictwo xiaomi...

Miałem na myśli ten klocek, xiaomi router 3 pro
Myślałem że to się nazywa r3g, a to r3p...
Sorki

11 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,055

Odp: Openvpn, wolne transfery

r3p jest wspierany od jakiegoś czasu.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

12 Odpowiedź przez misiek735

  • Zarejestrowany: 2016-07-17
  • Posty: 99

Odp: Openvpn, wolne transfery

I chyba na r3p się zdecyduje, bo widzę że najnowszy xiaomi 4 jak i 4a ma o wiele mniej ramu niż sprawdzony r3p.

Dzięki!

13 Odpowiedź przez misiek735

  • Zarejestrowany: 2016-07-17
  • Posty: 99

Odp: Openvpn, wolne transfery

Pozwolę sobie odświeżyć temat, ponieważ zmagam się z problemem utworzenia połączenia na nowo zakupionym r3g. W pierwszym poście opisałem sposób połączenia na openwrt, aczkolwiek w chwili obecnej chciałbym z tego rozwiązania korzystać na Gargoyle.

W confingu gui znajdują się 4 pozycje do wypełnienia: CA Certificate, Client Certificate, Client Key oraz TLS-Auth Key. O ile windscribe udostępnia CA certificate oraz tls auth key, o tyle dwóch pozostałych pozycji znaleźć od dostawcy vpna nie mogę.
Podczas próby zapisania konfiguracji bez tych danych wyskakuje błąd "Could not find config file".

Tutaj znalazłem jakąś odpowiedź w tej kwestii:
https://www.gargoyle-router.com/phpbb/v … amp;t=9129
ale nie jestem pewien czy w chwili obecnej rozwiązanie napisane przez użytkownika encro ma sens, zwłaszcza że temat dotyczy innego dostawcy niż windscribe z którego ja korzystam.
Poza tym, czy to co napisał encro:
"Despite the TLS standard stating that a client key isn't required Gargoyle won't unfortunately let you bypass it." to prawda? Może istnieje już jakiś sposób obejścia tego?

Natknąłem się też na temat opisujący manualny sposób konfiguracji openvpn:
https://eko.one.pl/forum/viewtopic.php?id=17688
jednak podczas próby jego wykonania, w momencie wpisania "uci set openvpn.custom_config=openvpn" pojawił się error uci entry not found... A wpisując samo uci set pojawił się cały opis uci, więc zgłupiałem i odpuściłem temat manualnej konfiguracji.

14 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,055

Odp: Openvpn, wolne transfery

Gui OpenVPN w gargoyle oparte jest na certyfikatach i wspiera tylko taką formę. Wszystko inne - nie zrobisz tego z gui. Jeżeli masz więc inną konfigurację to odinstaluj plugin openvpn z gui, odinstaluj openvpn i zainstaluj openvpn z repo openwrt (koniecznie! openvpn z gagroyle m swoje skrypty) i normalnie konfiguruj ręcznie jak w zwykłym openwrt.
Ograniczeń gui nie przeskoczysz w żaden sposób.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

15 Odpowiedź przez misiek735

  • Zarejestrowany: 2016-07-17
  • Posty: 99

Odp: Openvpn, wolne transfery

Dziękuję za szybką odpowiedź. Jestem już po wykonaniu wszystkich kroków oraz po konfiguracji połączenia vpn wraz z aktywacją firewalla, wszystko szło jak po maśle bazując się na opisie Twojego tematu:
https://eko.one.pl/forum/viewtopic.php?id=17688

W chwili obecnej wszystko śmiga. Teraz moim marzeniem jest skonfigurowanie wszystkiego tak, aby jedna sieć wifi szła przez vpn a druga nie, więc zgaduję że czeka mnie zabawa z siecią gościnną oraz studiowanie tego wątku:
https://eko.one.pl/forum/viewtopic.php?id=15411

Dziękuję jeszcze raz za pomoc smile

16 Odpowiedź przez misiek735 (edytowany przez misiek735 2020-08-21 23:05:21)

  • Zarejestrowany: 2016-07-17
  • Posty: 99

Odp: Openvpn, wolne transfery

Jestem zmuszony kontynuować temat, ponieważ nie wszystko działa tak jak bym oczekiwał. Dodatkowo nie do końca rozumiem temat...

Po zrobieniu speedtestu na openvpn okazało się że xiaomi router 3g wyciąga max 15 mb downloadu i uploadu. Spodziewałem się o wiele większej prędkości.

Okazało się również że windscribe jakiś miesiąc temu zaczął w końcu wspierać wireguard, o czym dowiedziałem się przypadkowo, dlatego też zrezygnowałem z openvpn na rzecz wireguard. Zainstalowałem na routerze testowy obraz gargoyle 1.13 który ma wbudowane wygodne GUI z wireguard za co jestem niezmiernie wdzięczny smile No i czegoś właśnie nie rozumiem...

O ile openvpn osiągał te 15mb, to wygodą był fakt że po podłączeniu się do routera przez WiFi cały ruch przechodził przez vpn od windscribe - czyli wszystkie urządzenia smart typu kamery czy odkurzacze xiaomi jakie posiadam, jak i telefony i komputery były pod ochroną vpn na czym mi właśnie zależy.
Jednak z tego co widzę, wireguard- dla przykładu na telefonie- wymusza na mnie instalacje aplikacji oraz jej skonfigurowanie tak aby łączyła się z moim routerem, bo w przeciwnym razie na telefonie nie ma internetu. Nawet teraz, po poprawnej (tak mi się wydaje) konfiguracji, telefon twierdzi że nie ma internetu, gdzie w rzeczywistości jest - ale to w sumie mały szczegół.

Myślałem że pomysł posiadania vpn-a na routerze zwolni mnie z obowiązku instalacji aplikacji na wszystkich urządzeniach w domu tylko w celu bezpiecznego łączenia się z siecią. Równie dobrze na każdym kompie i telefonie mógłbym zainstalować aplikacje windscribe i z niej korzystać bez kombinacji z wireguard... A co z odkurzaczem czy kamerą? Na nich nie ma przecież aplikacji gdzie mogę zainstalować apke wireguard...

W związku z tym, czy da się ustawić wszystko tak, aby cały wireguard działał sobie na routerze z ustawieniami vpn-a bez potrzeby instalacji i konfiguracji aplikacji na wszystkich urządzeniach jakie mam w domu?

17 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,055

Odp: Openvpn, wolne transfery

No tak, tak samo jak przy openvpn. Nie wiem po co instalujesz na telefonie klienta wireguard jak to właśnie router ma robić za klienta, identycznie jak to robił przy openvpn. Tak jak myślałeś że ma to działać.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

18 Odpowiedź przez ad2014 (edytowany przez ad2014 2020-08-22 07:37:56)

  • ad2014
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-04
  • Posty: 1,139

Odp: Openvpn, wolne transfery

mam wrażenie że chyba   , albo jak czegoś nie rozumie , albo  @misiek735 nie za bardzo rozumie jak to działa .  Moim zdaniem  server powinien byc postawiony na routerze  ,skonfigurowany tak by byl dostep do lanu   - wtedy  łacząc sie z klienta na telefonie mamy dostep  do wszystkich urzadzen w sieci   np do kamer   łaczac sie bezpiecznym tunelem .  W przypadku płatenego servera  i tak ruch przechodzi przez zdalny serwer  co ograniacza bezpieczenstwo  to raz  a dwa i tak  musimy miec   apke do vireguard by dostac sie do servera  bo jak inaczej ?

19 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,055

Odp: Openvpn, wolne transfery

Po co ci apka do wireguard? Jak stawiasz klienta openvpn na routerze to na telefonie podłączonym do routera instalujesz openvpn? Nie. I tu ma działac tak samo z wireguardem.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

20 Odpowiedź przez misiek735

  • Zarejestrowany: 2016-07-17
  • Posty: 99

Odp: Openvpn, wolne transfery

W takim razie coś jest nie tak. Pobieram konfiguracje dla wireguard z oficjalnej strony windscribe i w gui wybieram załadowanie pliku z tą konfiguracją. Wszystko wygląda tak jak na załączonym screenshocie, i z chwilą wejścia online żadne z połączonych urządzeń do routera nie ma internetu. Oczywiście tam gdzie jest aaaa czy bbbb to jest wygenerowany i prawidłowo postawiony ciąg znaków i liczb, jedynie tylko na potrzeby prywatności wyedytowałem dane na screenshocie bo nie wiem co można, a czego lepiej nie udostępniać.

https://i.imgur.com/d2AbSqZ.jpg

21 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,055

Odp: Openvpn, wolne transfery

Sprawdź czy w ogóle pinguje się np. 8.8.8.8, adres dns oraz endpoint który masz tam podany w konfigu.

To dość prosta konfiguracja, więc nie ma zbytnio co tu zepsuć.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

22 Odpowiedź przez misiek735 (edytowany przez misiek735 2020-08-23 09:21:07)

  • Zarejestrowany: 2016-07-17
  • Posty: 99

Odp: Openvpn, wolne transfery

Niestety nic nie pinguje.

Zalogowałem się przez ssh do routera, i wpisałem najpierw ping 8.8.8.8 = zero odpowiedzi. To samo z adresem dns oraz z Endpoint.
Jedynie co pinguje to IP które jest na obrazku na zielono jako "online, IP:".

Załączam logi routera. Najpierw włączyłem wireguard tak aby wczytał konfigurację i aby był status online, potem tylko uruchomiłem ponownie router, tak aby sam krok po kroku wykonał całą procedurę bootowania oraz wczytywania confingu wireguard. Wtedy skopiowałem log który udostępniam.

23 Odpowiedź przez misiek735

  • Zarejestrowany: 2016-07-17
  • Posty: 99

Odp: Openvpn, wolne transfery

Usunąłem część powtarzalnego kodu, bo post był za długi. 

 Sun Aug 23 10:49:53 2020 kern.notice kernel: [    0.000000] Linux version 4.14.187 (cezary@eko.one.pl) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10707-75d11f665c)) #0 SMP Fri Jul 10 11:55:54 2020
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] MIPS: machine is Xiaomi Mi Router 3G
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] Determined physical RAM map:
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000]  memory: 10000000 @ 00000000 (usable)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] VPE topology {2,2} total 4
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] Zone ranges:
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000]   HighMem  empty
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] Movable zone start for each node
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] Early memory node ranges
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    0.000000] On node 0 totalpages: 65536
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 805727c0, node_mem_map 81003000
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    0.000000]   Normal zone: 512 pages used for memmap
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    0.000000]   Normal zone: 65536 pages, LIFO batch:15
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    0.000000] random: get_random_bytes called from 0x80575744 with crng_init=0
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] percpu: Embedded 14 pages/cpu s26224 r8192 d22928 u57344
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    0.000000] pcpu-alloc: s26224 r8192 d22928 u57344 alloc=14*4096
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65024
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] Writing ErrCtl register=00008020
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] Readback ErrCtl register=00008020
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] Memory: 252460K/262144K available (4749K kernel code, 239K rwdata, 588K rodata, 1260K init, 255K bss, 9684K reserved, 0K cma-reserved, 0K highmem)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] Hierarchical RCU implementation.
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] NR_IRQS: 256
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] CPU Clock: 880MHz
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.007814] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.073987] pid_max: default: 32768 minimum: 301
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.078758] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.085267] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.094101] Hierarchical SRCU implementation.
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.099266] smp: Bringing up secondary CPUs ...
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.104494] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.104503] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.104515] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.104652] CPU1 revision is: 0001992f (MIPS 1004Kc)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.164013] Synchronize counters for CPU 1: done.
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.198616] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.198626] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.198633] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.198705] CPU2 revision is: 0001992f (MIPS 1004Kc)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.255165] Synchronize counters for CPU 2: done.
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.285647] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.285654] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.285661] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.285737] CPU3 revision is: 0001992f (MIPS 1004Kc)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.340347] Synchronize counters for CPU 3: done.
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.370201] smp: Brought up 1 node, 4 CPUs
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.378178] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.387974] futex hash table entries: 1024 (order: 3, 32768 bytes)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.394281] pinctrl core: initialized pinctrl subsystem
Sun Aug 23 10:49:53 2020 kern.info kernel: [    0.400944] NET: Registered protocol family 16
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    0.411536] FPU Affinity set after 11720 emulations
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.412266] pull PCIe RST: RALINK_RSTCTRL = 4000000
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.717540] release PCIe RST: RALINK_RSTCTRL = 7000000
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.722591] ***** Xtal 40MHz *****
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.725945] release PCIe RST: RALINK_RSTCTRL = 7000000
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.731044] Port 0 N_FTS = 1b105000
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.734513] Port 1 N_FTS = 1b105000
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    0.737952] Port 2 N_FTS = 1b102800
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    1.892847] PCIE2 no card, disable it(RST&CLK)
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    1.897213]  -> 21007f2
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    1.899611] PCIE0 enabled
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    1.902205] PCIE1 enabled
Sun Aug 23 10:49:53 2020 kern.info kernel: [    1.904807] PCI host bridge /pcie@1e140000 ranges:
Sun Aug 23 10:49:53 2020 kern.info kernel: [    1.909579]  MEM 0x0000000060000000..0x000000006fffffff
Sun Aug 23 10:49:53 2020 kern.info kernel: [    1.914740]   IO 0x000000001e160000..0x000000001e16ffff
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    1.919935] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
Sun Aug 23 10:49:53 2020 kern.info kernel: [    1.935967] mt7621_gpio 1e000600.gpio: registering 32 gpios
Sun Aug 23 10:49:53 2020 kern.info kernel: [    1.941741] mt7621_gpio 1e000600.gpio: registering 32 gpios
Sun Aug 23 10:49:53 2020 kern.info kernel: [    1.947572] mt7621_gpio 1e000600.gpio: registering 32 gpios
Sun Aug 23 10:49:53 2020 kern.info kernel: [    1.955239] PCI host bridge to bus 0000:00
Sun Aug 23 10:49:53 2020 kern.info kernel: [    1.959356] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    1.966128] pci_bus 0000:00: root bus resource [io  0xffffffff]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    1.972018] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    1.978740] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.986664] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.986705] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.986718] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff]
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.986783] pci 0000:00:00.0: supports D1
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.986792] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.987061] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.987105] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.987124] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff]
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.987189] pci 0000:00:01.0: supports D1
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.987198] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.987672] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.987728] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.987858] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.988066] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.988302] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.988370] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.988416] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.988510] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.988701] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    1.988729] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
Sun Aug 23 10:49:53 2020 kern.info kernel: [    1.988811] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    1.995329] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.002280] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.008800] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.015743] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.022461] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.029219] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.036368] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.043129] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.049850] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.056604] pci 0000:00:00.0: PCI bridge to [bus 01]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.061514] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.068282] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.075518] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.082692] pci 0000:00:01.0: PCI bridge to [bus 02]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.087599] pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.094356] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff pref]
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.102945] clocksource: Switched to clocksource GIC
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.109433] NET: Registered protocol family 2
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.114488] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.121379] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.127836] TCP: Hash tables configured (established 2048 bind 2048)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.134251] UDP hash table entries: 256 (order: 1, 8192 bytes)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.140017] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.146495] NET: Registered protocol family 1
Sun Aug 23 10:49:53 2020 kern.debug kernel: [    2.150824] PCI: CLS 0 bytes, default 32
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.382910] 4 CPUs re-calibrate udelay(lpj = 2924544)
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    2.389375] Crashlog allocated RAM at address 0x3f00000
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.394850] workingset: timestamp_bits=30 max_order=16 bucket_order=0
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.408868] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.414667] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    2.424843] random: fast init done
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.431046] io scheduler noop registered
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.434960] io scheduler deadline registered (default)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.441140] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.451026] console [ttyS0] disabled
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.454623] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.463609] console [ttyS0] enabled
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.470462] bootconsole [early0] disabled
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    2.480779] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    2.487958] Enable NFI Clock
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    2.490829] # MTK NAND # : Use HW ECC
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.494517] Device found in MTK table, ID: c8d1, EXT_ID: 809540
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    2.500409] Support this Device in MTK table! c8d1
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    2.505379] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.511838] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.518176] nand: ESMT NAND 128MiB 3,3V 8-bit
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.522513] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.530090] Scanning device for bad blocks
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    2.678725] 10 fixed-partitions partitions found on MTD device MT7621-NAND
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    2.685585] Creating 10 MTD partitions on "MT7621-NAND":
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    2.690880] 0x000000000000-0x000000080000 : "Bootloader"
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    2.697227] 0x000000080000-0x0000000c0000 : "Config"
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    2.703188] 0x0000000c0000-0x000000100000 : "Bdata"
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    2.708925] 0x000000100000-0x000000140000 : "Factory"
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    2.714888] 0x000000140000-0x000000180000 : "crash"
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    2.720572] 0x000000180000-0x0000001c0000 : "crash_syslog"
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    2.726978] 0x0000001c0000-0x000000200000 : "reserved0"
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    2.733139] 0x000000200000-0x000000600000 : "kernel_stock"
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    2.739558] 0x000000600000-0x000000a00000 : "kernel"
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    2.745492] 0x000000a00000-0x000007f80000 : "ubi"
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    2.752050] [mtk_nand] probe successfully!
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    2.756908] Signature matched and data read!
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    2.761155] load_fact_bbt success 1023
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.765642] libphy: Fixed MDIO Bus: probed
Sun Aug 23 10:49:53 2020 kern.info kernel: [    2.835513] libphy: mdio: probed
Sun Aug 23 10:49:53 2020 kern.info kernel: [    4.239131] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
Sun Aug 23 10:49:53 2020 kern.info kernel: [    4.245802] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
Sun Aug 23 10:49:53 2020 kern.info kernel: [    4.256826] NET: Registered protocol family 10
Sun Aug 23 10:49:53 2020 kern.info kernel: [    4.263013] Segment Routing with IPv6
Sun Aug 23 10:49:53 2020 kern.info kernel: [    4.266777] NET: Registered protocol family 17
Sun Aug 23 10:49:53 2020 kern.info kernel: [    4.271277] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Sun Aug 23 10:49:53 2020 kern.info kernel: [    4.284196] 8021q: 802.1Q VLAN Support v1.8
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    4.291377] UBI: auto-attach mtd9
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    4.294765] ubi0: attaching mtd9
Sun Aug 23 10:49:53 2020 kern.info kernel: [    4.417368] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    5.388025] ubi0: scanning is finished
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    5.407718] ubi0: attached mtd9 (name "ubi", size 117 MiB)
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    5.413246] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    5.420088] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    5.426861] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    5.433807] ubi0: good PEBs: 940, bad PEBs: 0, corrupted PEBs: 0
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    5.439785] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    5.446992] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2132630503
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    5.456102] ubi0: available PEBs: 0, total reserved PEBs: 940, PEBs reserved for bad PEB handling: 20
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    5.465320] ubi0: background thread "ubi_bgt0d" started, PID 396
Sun Aug 23 10:49:53 2020 kern.info kernel: [    5.467072] block ubiblock0_0: created from ubi0:0(rootfs)
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    5.476809] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
Sun Aug 23 10:49:53 2020 kern.info kernel: [    5.483766] hctosys: unable to open rtc device (rtc0)
Sun Aug 23 10:49:53 2020 kern.info kernel: [    5.489045] usb_vbus: disabling
Sun Aug 23 10:49:53 2020 kern.info kernel: [    5.499016] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Sun Aug 23 10:49:53 2020 kern.info kernel: [    5.510410] Freeing unused kernel memory: 1260K
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    5.514965] This architecture does not have kernel memory protection.
Sun Aug 23 10:49:53 2020 user.info kernel: [    6.061737] init: Console is alive
Sun Aug 23 10:49:53 2020 user.info kernel: [    6.065510] init: - watchdog -
Sun Aug 23 10:49:53 2020 user.info kernel: [    7.918850] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.040727] usbcore: registered new interface driver usbfs
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.046352] usbcore: registered new interface driver hub
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.051808] usbcore: registered new device driver usb
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.081369] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    8.094224] SCSI subsystem initialized
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.101691] ehci-platform: EHCI generic platform driver
Sun Aug 23 10:49:53 2020 kern.warn kernel: [    8.113324] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.122251] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.127618] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.143107] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.152279] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.158996] hub 1-0:1.0: USB hub found
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.162832] hub 1-0:1.0: 2 ports detected
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.167511] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.172834] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.180345] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0  SuperSpeed
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.186966] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.195942] hub 2-0:1.0: USB hub found
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.199768] hub 2-0:1.0: 1 port detected
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.212493] usbcore: registered new interface driver usb-storage
Sun Aug 23 10:49:53 2020 kern.info kernel: [    8.220524] usbcore: registered new interface driver uas
Sun Aug 23 10:49:53 2020 user.info kernel: [    8.226293] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Sun Aug 23 10:49:53 2020 user.info kernel: [    8.243414] init: - preinit -
Sun Aug 23 10:49:53 2020 kern.info kernel: [    9.306991] mtk_soc_eth 1e100000.ethernet: PPE started
Sun Aug 23 10:49:53 2020 kern.notice kernel: [    9.379322] random: procd: uninitialized urandom read (4 bytes read)
Sun Aug 23 10:49:53 2020 user.info kernel: [   12.557688] mount_root: loading kmods from internal overlay
Sun Aug 23 10:49:53 2020 user.info kernel: [   12.611137] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Sun Aug 23 10:49:53 2020 user.info kernel: [   12.621941] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   13.134277] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 533
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   13.207568] UBIFS (ubi0:1): recovery needed
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   13.372316] UBIFS (ubi0:1): recovery completed
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   13.376949] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   13.384762] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   13.394651] UBIFS (ubi0:1): FS size: 107167744 bytes (102 MiB, 844 LEBs), journal size 5332992 bytes (5 MiB, 42 LEBs)
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   13.405222] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   13.411809] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 4F5D9701-A9CA-4052-A551-6A91EA2DE7AD, small LPT model
Sun Aug 23 10:49:53 2020 user.info kernel: [   13.425738] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Sun Aug 23 10:49:53 2020 user.info kernel: [   13.443278] block: extroot: not configured
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   13.483179] UBIFS (ubi0:1): un-mount UBI device 0
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   13.487895] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   13.500046] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 536
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   13.661992] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   13.669831] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   13.679720] UBIFS (ubi0:1): FS size: 107167744 bytes (102 MiB, 844 LEBs), journal size 5332992 bytes (5 MiB, 42 LEBs)
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   13.690290] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   13.696902] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 4F5D9701-A9CA-4052-A551-6A91EA2DE7AD, small LPT model
Sun Aug 23 10:49:53 2020 user.info kernel: [   14.079892] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Sun Aug 23 10:49:53 2020 user.info kernel: [   14.095781] block: extroot: not configured
Sun Aug 23 10:49:53 2020 user.info kernel: [   14.146335] mount_root: switching to ubifs overlay
Sun Aug 23 10:49:53 2020 user.warn kernel: [   14.206799] urandom-seed: Seeding with /etc/urandom.seed
Sun Aug 23 10:49:53 2020 kern.info kernel: [   14.303479] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
Sun Aug 23 10:49:53 2020 user.info kernel: [   14.318464] procd: - early -
Sun Aug 23 10:49:53 2020 user.info kernel: [   14.321446] procd: - watchdog -
Sun Aug 23 10:49:53 2020 user.info kernel: [   15.013205] procd: - watchdog -
Sun Aug 23 10:49:53 2020 user.info kernel: [   15.016781] procd: - ubus -
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   15.031764] random: jshn: uninitialized urandom read (4 bytes read)
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   15.123644] random: ubusd: uninitialized urandom read (4 bytes read)
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   15.133816] random: ubusd: uninitialized urandom read (4 bytes read)
Sun Aug 23 10:49:53 2020 user.info kernel: [   15.185309] procd: - init -
Sun Aug 23 10:49:53 2020 user.info kernel: [   15.834279] kmodloader: loading kernel modules from /etc/modules.d/*
Sun Aug 23 10:49:53 2020 kern.info kernel: [   15.945412] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   15.961594] Key type dns_resolver registered
Sun Aug 23 10:49:53 2020 user.info kernel: [   15.963797] urngd: v1.0.2 started.
Sun Aug 23 10:49:53 2020 kern.info kernel: [   15.985412] RPC: Registered named UNIX socket transport module.
Sun Aug 23 10:49:53 2020 kern.info kernel: [   15.991332] RPC: Registered udp transport module.
Sun Aug 23 10:49:53 2020 kern.info kernel: [   15.996060] RPC: Registered tcp transport module.
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.000739] RPC: Registered tcp NFSv4.1 backchannel transport module.
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.018809] tun: Universal TUN/TAP device driver, 1.6
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.035864] gre: GRE over IPv4 demultiplexor driver
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.042264] ip_gre: GRE over IPv4 tunneling driver
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.077301] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   16.094083] NFS: Registering the id_resolver key type
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   16.099177] Key type id_resolver registered
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   16.103596] Key type id_legacy registered
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.115958] ip6_tables: (C) 2000-2006 Netfilter Core Team
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.137322] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   16.139611] random: crng init done
Sun Aug 23 10:49:53 2020 kern.notice kernel: [   16.146763] random: 6 urandom warning(s) missed due to ratelimiting
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.209876] Mirror/redirect action on
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.222830] u32 classifier
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.225584]     input device check on
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.229260]     Actions configured
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.244599] GACT probability on
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.253522] Simple TC action Loaded
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.286675] fuse init (API version 7.26)
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.302571] usbcore: registered new interface driver cdc_acm
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.308268] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.318812] usbcore: registered new interface driver cdc_wdm
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.328914] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.336709] Backport generated by backports.git v4.19.120-1-0-g60c3a249
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.356768] Ebtables v2.0 registered
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.363957] ip_tables: (C) 2000-2006 Netfilter Core Team
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.536597] usbcore: registered new interface driver ums-alauda
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.544595] usbcore: registered new interface driver ums-cypress
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.552707] usbcore: registered new interface driver ums-datafab
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.561588] usbcore: registered new interface driver ums-freecom
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.570588] usbcore: registered new interface driver ums-isd200
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.579307] usbcore: registered new interface driver ums-jumpshot
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.588542] usbcore: registered new interface driver ums-karma
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.598394] usbcore: registered new interface driver ums-sddr09
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.607347] usbcore: registered new interface driver ums-sddr55
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.616771] usbcore: registered new interface driver ums-usbat
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.626670] usbcore: registered new interface driver usblp
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.649870] usbcore: registered new interface driver usbserial
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.656028] usbcore: registered new interface driver usbserial_generic
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.662812] usbserial: USB Serial support registered for generic
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.678021] wireguard: WireGuard 1.0.20200611 loaded. See www.wireguard.com for information.
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.686537] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.771539] xt_time: kernel timezone is -0000
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.780161] usbcore: registered new interface driver cdc_ether
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.793276] usbcore: registered new interface driver cdc_ncm
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.859194] usbcore: registered new interface driver huawei_cdc_ncm
Sun Aug 23 10:49:53 2020 kern.warn kernel: [   16.935119] bus=0x1, slot = 0x0, irq=0xff
Sun Aug 23 10:49:53 2020 kern.info kernel: [   16.939376] mt7603e 0000:01:00.0: ASIC revision: 76030010
Sun Aug 23 10:49:53 2020 kern.info kernel: [   17.974453] mt7603e 0000:01:00.0: Firmware Version: ap_pcie
Sun Aug 23 10:49:53 2020 kern.info kernel: [   17.980028] mt7603e 0000:01:00.0: Build Time: 20160107100755
Sun Aug 23 10:49:53 2020 kern.info kernel: [   18.022950] mt7603e 0000:01:00.0: firmware init done
Sun Aug 23 10:49:53 2020 kern.debug kernel: [   18.192834] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sun Aug 23 10:49:53 2020 kern.warn kernel: [   18.214709] bus=0x2, slot = 0x1, irq=0xff
Sun Aug 23 10:49:53 2020 kern.info kernel: [   18.218958] mt76x2e 0000:02:00.0: ASIC revision: 76120044
Sun Aug 23 10:49:53 2020 kern.info kernel: [   18.947765] mt76x2e 0000:02:00.0: ROM patch build: 20141115060606a
Sun Aug 23 10:49:53 2020 kern.info kernel: [   18.958750] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
Sun Aug 23 10:49:53 2020 kern.info kernel: [   18.964322] mt76x2e 0000:02:00.0: Build: 1
Sun Aug 23 10:49:53 2020 kern.info kernel: [   18.968438] mt76x2e 0000:02:00.0: Build Time: 201507311614____
Sun Aug 23 10:49:53 2020 kern.info kernel: [   18.993027] mt76x2e 0000:02:00.0: Firmware running!
Sun Aug 23 10:49:53 2020 kern.debug kernel: [   19.000666] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Sun Aug 23 10:49:53 2020 kern.info kernel: [   19.016416] PPP generic driver version 2.4.2
Sun Aug 23 10:49:53 2020 kern.info kernel: [   19.022715] NET: Registered protocol family 24
Sun Aug 23 10:49:53 2020 kern.info kernel: [   19.028683] PPTP driver version 0.8.5
Sun Aug 23 10:49:53 2020 kern.info kernel: [   19.035703] usbcore: registered new interface driver qmi_wwan
Sun Aug 23 10:49:53 2020 kern.info kernel: [   19.045957] usbcore: registered new interface driver rndis_host
Sun Aug 23 10:49:53 2020 kern.info kernel: [   19.055965] usbcore: registered new interface driver sierra
Sun Aug 23 10:49:53 2020 kern.info kernel: [   19.061660] usbserial: USB Serial support registered for Sierra USB modem
Sun Aug 23 10:49:53 2020 kern.info kernel: [   19.071853] usbcore: registered new interface driver sierra_net
Sun Aug 23 10:49:53 2020 kern.info kernel: [   19.086359] usbcore: registered new interface driver cdc_mbim
Sun Aug 23 10:49:53 2020 kern.info kernel: [   19.094453] usbcore: registered new interface driver option
Sun Aug 23 10:49:53 2020 kern.info kernel: [   19.100162] usbserial: USB Serial support registered for GSM modem (1-port)
Sun Aug 23 10:49:53 2020 kern.info kernel: [   19.112309] usbcore: registered new interface driver qcserial
Sun Aug 23 10:49:53 2020 kern.info kernel: [   19.118261] usbserial: USB Serial support registered for Qualcomm USB modem
Sun Aug 23 10:49:53 2020 user.info kernel: [   19.125747] kmodloader: done loading kernel modules from /etc/modules.d/*
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .bit
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .glue
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .parody
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .dyn
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .bbs
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .free
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .fur
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .geek
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .gopher
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .indy
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .ing
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .null
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .oss
Sun Aug 23 10:49:54 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .micro
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: started, version 2.80 cachesize 150
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: DNS service limited to local subnets
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using local addresses only for domain test
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using local addresses only for domain onion
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using local addresses only for domain localhost
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using local addresses only for domain local
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using local addresses only for domain invalid
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using local addresses only for domain bind
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain micro
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain micro
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain micro
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain oss
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain oss
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain oss
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain null
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain null
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain null
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain ing
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain ing
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain ing
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain indy
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain indy
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain indy
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain gopher
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain gopher
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain gopher
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain geek
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain geek
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain geek
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain fur
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain fur
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain fur
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain free
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain free
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain free
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain bbs
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain bbs
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain bbs
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: using 11 more nameservers
Sun Aug 23 10:49:55 2020 daemon.warn dnsmasq[1907]: no servers found in /tmp/resolv.conf.auto, will retry
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: read /etc/hosts - 5 addresses
Sun Aug 23 10:49:55 2020 daemon.info dnsmasq[1907]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Sun Aug 23 10:49:55 2020 authpriv.info dropbear[1940]: Not backgrounding
Sun Aug 23 10:49:57 2020 kern.warn kernel: [   24.055446] xt_bandwidth: timezone shift of 180 minutes detected, adjusting
Sun Aug 23 10:49:57 2020 kern.warn kernel: [   24.062395]                old minutes west=0, new minutes west=-180
Sun Aug 23 10:50:00 2020 user.notice : Added device handler type: 8021ad
Sun Aug 23 10:50:00 2020 user.notice : Added device handler type: 8021q
Sun Aug 23 10:50:00 2020 user.notice : Added device handler type: macvlan
Sun Aug 23 10:50:00 2020 user.notice : Added device handler type: veth
Sun Aug 23 10:50:00 2020 user.notice : Added device handler type: bridge
Sun Aug 23 10:50:00 2020 user.notice : Added device handler type: Network device
Sun Aug 23 10:50:00 2020 user.notice : Added device handler type: tunnel
Sun Aug 23 10:50:02 2020 kern.info kernel: [   29.393226] mtk_soc_eth 1e100000.ethernet: PPE started
Sun Aug 23 10:50:02 2020 kern.info kernel: [   29.403577] device eth0 entered promiscuous mode
Sun Aug 23 10:50:02 2020 kern.info kernel: [   29.409201] br-lan: port 1(eth0.1) entered blocking state
Sun Aug 23 10:50:02 2020 kern.info kernel: [   29.414741] br-lan: port 1(eth0.1) entered disabled state
Sun Aug 23 10:50:02 2020 kern.info kernel: [   29.420829] device eth0.1 entered promiscuous mode
Sun Aug 23 10:50:02 2020 kern.info kernel: [   29.428627] br-lan: port 1(eth0.1) entered blocking state
Sun Aug 23 10:50:02 2020 kern.info kernel: [   29.434076] br-lan: port 1(eth0.1) entered forwarding state
Sun Aug 23 10:50:02 2020 kern.info kernel: [   29.440186] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Interface 'lan' is enabled
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Interface 'lan' is setting up now
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Interface 'lan' is now up
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: reading /tmp/resolv.conf.auto
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using local addresses only for domain test
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using local addresses only for domain onion
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using local addresses only for domain localhost
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using local addresses only for domain local
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using local addresses only for domain invalid
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using local addresses only for domain bind
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain micro
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain micro
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain micro
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain oss
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain oss
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain oss
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain null
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain null
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain null
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain ing
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain ing
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain ing
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain indy
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain indy
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain indy
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain gopher
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain gopher
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain gopher
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Interface 'loopback' is enabled
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Interface 'loopback' is setting up now
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain geek
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain geek
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Interface 'loopback' is now up
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain geek
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain fur
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain fur
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain fur
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain free
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain free
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain free
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain bbs
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain bbs
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain bbs
Sun Aug 23 10:50:02 2020 daemon.warn dnsmasq[1907]: ignoring nameserver 192.168.2.1 - local interface
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Interface 'wan' is enabled
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Interface 'wan6' is enabled
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Interface 'wg0' is setting up now
Sun Aug 23 10:50:02 2020 daemon.info dnsmasq[1907]: using 11 more nameservers
Sun Aug 23 10:50:02 2020 daemon.notice netifd: bridge 'br-lan' link is up
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Interface 'lan' has link connectivity
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Network device 'eth0' link is up
Sun Aug 23 10:50:02 2020 daemon.notice netifd: VLAN 'eth0.1' link is up
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Network device 'lo' link is up
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Interface 'loopback' has link connectivity
Sun Aug 23 10:50:02 2020 daemon.notice netifd: VLAN 'eth0.2' link is up
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Interface 'wan' has link connectivity
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Interface 'wan' is setting up now
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Interface 'wan6' has link connectivity
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Interface 'wan6' is setting up now
Sun Aug 23 10:50:02 2020 daemon.notice netifd: Interface 'wan6' is now up
Sun Aug 23 10:50:03 2020 daemon.notice netifd: wan (2579): udhcpc: started, v1.30.1
Sun Aug 23 10:50:03 2020 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sun Aug 23 10:50:03 2020 daemon.notice netifd: wan (2579): udhcpc: sending discover
Sun Aug 23 10:50:03 2020 kern.info kernel: [   30.486794] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Sun Aug 23 10:50:03 2020 daemon.notice netifd: wan (2579): udhcpc: sending select for 192.168.11.144
Sun Aug 23 10:50:03 2020 daemon.err odhcpd[2427]: Failed to send to ff02::1%lan@br-lan (Address not available)
Sun Aug 23 10:50:04 2020 daemon.notice netifd: wan (2579): udhcpc: lease of 192.168.11.144 obtained, lease time 43200
Sun Aug 23 10:50:04 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Sun Aug 23 10:50:04 2020 daemon.notice netifd: Interface 'wan' is now up
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: reading /tmp/resolv.conf.auto
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using local addresses only for domain test
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using local addresses only for domain onion
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using local addresses only for domain localhost
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using local addresses only for domain local
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using local addresses only for domain invalid
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using local addresses only for domain bind
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain micro
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain micro
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain micro
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain oss
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain oss
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain oss
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain null
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain null
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain null
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain ing
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain ing
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain ing
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain indy
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain indy
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain indy
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain gopher
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain gopher
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain gopher
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain geek
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain geek
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain geek
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain fur
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain fur
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain fur
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain free
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain free
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain free
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.142.171.235#53 for domain bbs
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 95.211.32.162#53 for domain bbs
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using nameserver 66.244.95.20#53 for domain bbs
Sun Aug 23 10:50:04 2020 daemon.warn dnsmasq[1907]: ignoring nameserver 192.168.2.1 - local interface
Sun Aug 23 10:50:04 2020 daemon.info dnsmasq[1907]: using 12 more nameservers
Sun Aug 23 10:50:05 2020 user.err : error starting threads: errno 2 (No such file or directory)
Sun Aug 23 10:50:06 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sun Aug 23 10:50:06 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Sun Aug 23 10:50:06 2020 kern.info kernel: [   32.583813] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sun Aug 23 10:50:06 2020 daemon.notice procd: /etc/rc.d/S60nfsd: exportfs: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Sun Aug 23 10:50:06 2020 daemon.notice procd: /etc/rc.d/S60nfsd: exportfs: can't lock /var/lib/nfs/etab for writing
Sun Aug 23 10:50:06 2020 daemon.notice procd: /etc/rc.d/S60nfsd: Command failed: Not found
Sun Aug 23 10:50:06 2020 kern.info kernel: [   33.066898] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Sun Aug 23 10:50:06 2020 kern.info kernel: [   33.073042] br-lan: port 2(wlan0) entered blocking state
Sun Aug 23 10:50:06 2020 kern.info kernel: [   33.078405] br-lan: port 2(wlan0) entered disabled state
Sun Aug 23 10:50:06 2020 kern.info kernel: [   33.084498] device wlan0 entered promiscuous mode
Sun Aug 23 10:50:06 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Sun Aug 23 10:50:06 2020 kern.info kernel: [   33.156171] br-lan: port 3(wlan1) entered blocking state
Sun Aug 23 10:50:06 2020 kern.info kernel: [   33.161533] br-lan: port 3(wlan1) entered disabled state
Sun Aug 23 10:50:06 2020 kern.info kernel: [   33.167684] device wlan1 entered promiscuous mode
Sun Aug 23 10:50:06 2020 kern.info kernel: [   33.172756] br-lan: port 3(wlan1) entered blocking state
Sun Aug 23 10:50:06 2020 kern.info kernel: [   33.178213] br-lan: port 3(wlan1) entered forwarding state
Sun Aug 23 10:50:06 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Sun Aug 23 10:50:06 2020 daemon.err hostapd: Using interface wlan0 with hwaddr ec:41:18:0d:ed:ad and ssid "Gargoyle test"
Sun Aug 23 10:50:06 2020 daemon.err hostapd: Using interface wlan1 with hwaddr ec:41:18:0d:ed:ae and ssid "Gargoyle 5 ghz test"
Sun Aug 23 10:50:07 2020 daemon.notice procd: /etc/rc.d/S90ddns_gargoyle: ERROR: No valid dynamic DNS service configurations defined
Sun Aug 23 10:50:07 2020 daemon.notice procd: /etc/rc.d/S90ddns_gargoyle: (Did you specify correct configuration file path?)
Sun Aug 23 10:50:40 2020 kern.info kernel: [   33.670476] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sun Aug 23 10:50:40 2020 kern.info kernel: [   33.767297] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sun Aug 23 10:50:40 2020 kern.info kernel: [   33.774275] br-lan: port 2(wlan0) entered blocking state
Sun Aug 23 10:50:40 2020 kern.info kernel: [   33.779647] br-lan: port 2(wlan0) entered forwarding state
Sun Aug 23 10:50:40 2020 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ENABLED
Sun Aug 23 10:50:40 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Sun Aug 23 10:50:40 2020 daemon.notice netifd: Interface 'wg0' is now up
Sun Aug 23 10:50:40 2020 daemon.notice netifd: Network device 'wg0' link is up
Sun Aug 23 10:50:40 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ENABLED
Sun Aug 23 10:50:40 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sun Aug 23 10:50:40 2020 daemon.notice netifd: Network device 'wlan1' link is up
Sun Aug 23 10:50:40 2020 daemon.notice netifd: Network device 'wlan0' link is up
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[1907]: exiting on receipt of SIGTERM
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: started, version 2.80 cachesize 150
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: DNS service limited to local subnets
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq-dhcp[3946]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 12h
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: using local addresses only for domain test
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: using local addresses only for domain onion

Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: using 11 more nameservers
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: reading /tmp/resolv.conf.auto
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: using local addresses only for domain test
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: using local addresses only for domain onion
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: using local addresses only for domain localhost
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: using local addresses only for domain local
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: using local addresses only for domain invalid
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: using local addresses only for domain bind
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: using nameserver 95.142.171.235#53 for domain micro

Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: using nameserver 66.244.95.20#53 for domain bbs
Sun Aug 23 10:50:43 2020 daemon.warn dnsmasq[3946]: ignoring nameserver 192.168.2.1 - local interface
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: using 12 more nameservers
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: read /etc/hosts - 5 addresses
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq-dhcp[3946]: read /etc/ethers - 0 addresses
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: read /etc/hosts - 5 addresses
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq[3946]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sun Aug 23 10:50:43 2020 daemon.info dnsmasq-dhcp[3946]: read /etc/ethers - 0 addresses
Sun Aug 23 10:51:06 2020 user.notice root: vsftpd init: mounted = 0
Sun Aug 23 10:51:06 2020 daemon.notice procd: /etc/rc.d/S90vsftpd: ERROR: No drives attached, no directories to share!
Sun Aug 23 10:51:06 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led WAN (amber)
Sun Aug 23 10:51:06 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN1 (amber)
Sun Aug 23 10:51:06 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN2 (amber)
Sun Aug 23 10:51:06 2020 daemon.info procd: - init complete -
Sun Aug 23 10:51:07 2020 daemon.info hostapd: wlan1: STA ca:7c:26:d4:f6:af IEEE 802.11: authenticated
Sun Aug 23 10:51:07 2020 daemon.notice hostapd: wlan1: STA-OPMODE-N_SS-CHANGED ca:7c:26:d4:f6:af 2
Sun Aug 23 10:51:07 2020 daemon.info hostapd: wlan1: STA ca:7c:26:d4:f6:af IEEE 802.11: associated (aid 1)
Sun Aug 23 10:51:07 2020 daemon.notice hostapd: wlan1: AP-STA-CONNECTED ca:7c:26:d4:f6:af
Sun Aug 23 10:51:07 2020 daemon.info hostapd: wlan1: STA ca:7c:26:d4:f6:af RADIUS: starting accounting session 736B8D8E8EC26F17
Sun Aug 23 10:51:07 2020 daemon.info hostapd: wlan1: STA ca:7c:26:d4:f6:af WPA: pairwise key handshake completed (RSN)
Sun Aug 23 10:51:11 2020 daemon.info dnsmasq-dhcp[3946]: DHCPDISCOVER(br-lan) ca:7c:26:d4:f6:af
Sun Aug 23 10:51:11 2020 daemon.info dnsmasq-dhcp[3946]: DHCPOFFER(br-lan) 192.168.2.177 ca:7c:26:d4:f6:af
Sun Aug 23 10:51:11 2020 daemon.info dnsmasq-dhcp[3946]: DHCPDISCOVER(br-lan) ca:7c:26:d4:f6:af
Sun Aug 23 10:51:11 2020 daemon.info dnsmasq-dhcp[3946]: DHCPOFFER(br-lan) 192.168.2.177 ca:7c:26:d4:f6:af
Sun Aug 23 10:51:11 2020 daemon.info dnsmasq-dhcp[3946]: DHCPREQUEST(br-lan) 192.168.2.177 ca:7c:26:d4:f6:af
Sun Aug 23 10:51:11 2020 daemon.info dnsmasq-dhcp[3946]: DHCPACK(br-lan) 192.168.2.177 ca:7c:26:d4:f6:af OnePlus7
Sun Aug 23 10:51:23 2020 user.notice firewall: Reloading firewall due to ifup of wan6 (eth0.2)
Sun Aug 23 10:51:26 2020 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
Success

24 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,055

Odp: Openvpn, wolne transfery

Raczej wg show pokąz. Ale jak ci się endpoint nie pinguje to jest raczej źle. Sprawdzałeś tą samą konfigurację np. na telefonie czy windowsie czy działa?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

25 Odpowiedź przez misiek735

  • Zarejestrowany: 2016-07-17
  • Posty: 99

Odp: Openvpn, wolne transfery

Na windowsie działa. Wczytałem ten sam config co na routerze, i wszystko jest ok, tzn. po wpisaniu "my ip" w google widzę ip które pokrywa się z tym z programu wireguard.

root@Gargoyle:~# wg show
interface: wg0
  public key: aPe0DZ2xxxxxxxxxSHmEk1JqjI=
  private key: (hidden)
  listening port: 51820

peer: Z3xxxxxxxxxxxxxxxxxxxxxsk2unuD1accZPWQ=
  endpoint: 194.34.133.83:443
  allowed ips: 0.0.0.0/0
  transfer: 0 B received, 4.05 KiB sent
root@Gargoyle:~#