Kupiłem od chińczyków NEXX 3020F (jeszcze leci)
Chciałbym podłączyć go w samochodzie z modemem HUAWEI E173.
Jestem słaby w takich sprawach. Mam kilka pytań laika.

Chce mieć na nim OPENWRT. Jeżeli bedę postępował wg tej instrucji:

http://www.securityskeptic.com/2016/01/ … outer.html

Once you have an Internet connection, telnet to the WT3020 at 192.168.8.1 using the default Nexx account credentials I show here. I've copied the commands I used and the output from the scripts below:

$ telnet 192.168.8.1
Trying 192.168.8.1...
Connected to 192.168.8.1.
Escape character is '^]'.

(none) login: nexxadmin
Password: y1n2inc.com0755

BusyBox v1.12.1 (2015-02-05 18:04:51 HKT) built-in shell (ash)
Enter 'help' for a list of built-in commands.

# cd /tmp
# wget http://downloads.openwrt.org/chaos_calm … penwrt-15.
05-ramips-mt7620-wt3020-8M-squashfs-sysupgrade.bin
Connecting to downloads.openwrt.org (78.24.191.177:80)
openwrt-15.05-ramips 100% |*******************************| 3328k 00:00:00 ETA
# mtd_write -r write openwrt-15.05-ramips-mt7620-wt3020-8M-squashfs-sysupgrade.bin mtd3
Unlocking mtd3 ...
Writing from openwrt-15.05-ramips-mt7620-wt3020-8M-squashfs-sysupgrade.bin to mtd3 ... [e]
#reboot

Warning. Your Nexx may force close telnet. Don't panic. Reboot via a power cycle.

At this point, you should be running the openWRT software. Note that openWRT assigns the IP address 192.168.1.1 to the internal LAN port. This is different from what NEXX assigns. If you're still able to connect to 192.168.8.1, something went awry: lather, rinse, repeat.

Wszystko będzie ok?

Którą później wersję OpenWRT z GUI www wybrać?
W jaki sposób Zainstalować?

Dziękuję.