1 Temat przez Cocon

  • Cocon
  • Użytkownik
  • Nieaktywny
  • Skąd: Smardy Dolne k. Kluczborka
  • Zarejestrowany: 2014-09-08
  • Posty: 41

Temat: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

Witam wszystkich serdecznie
Posiadam ruter TP-Link WR-1043ND-V2 z gargoyle 1.6.2.1_01 i modem huawei e3276s-150 z sieci PLUS. Po podłączeniu anten do modemu i modemu do rutera nie mam dostępu do internetu. Dioda na modemie świeci na zielono w sposób ciągły co oznacza, że modem jest w stanie zalogowania do sieci PLUS, a neta nie ma, prawdopodobnie coś nie tak ustawiłem w parametrach rutera, ale nie wiem co. Pragnę nadmienić, że jak wepnę modem do PC to komputer nawiązuje połączenie z internetem (LTE) i net śmiga aż miło, i dioda z modemu również świeci ciągle na zielono, czyli modem jest sprawny. Proszę o pomoc w rozwiązaniu tego problemu. Poniżej logi z rutera:

Jan  1 01:00:38 Gargoyle kern.warn kernel: [    0.000000] Movable zone start PFN for each node
Jan  1 01:00:38 Gargoyle kern.warn kernel: [    0.000000] Early memory PFN ranges
Jan  1 01:00:38 Gargoyle kern.warn kernel: [    0.000000]     0: 0x00000000 -> 0x00004000
Jan  1 01:00:38 Gargoyle kern.debug kernel: [    0.000000] On node 0 totalpages: 16384
Jan  1 01:00:38 Gargoyle kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 802fdf20, node_mem_map 81000000
Jan  1 01:00:38 Gargoyle kern.debug kernel: [    0.000000]   Normal zone: 128 pages used for memmap
Jan  1 01:00:38 Gargoyle kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Jan  1 01:00:38 Gargoyle kern.debug kernel: [    0.000000]   Normal zone: 16256 pages, LIFO batch:3
Jan  1 01:00:38 Gargoyle kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jan  1 01:00:38 Gargoyle kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Jan  1 01:00:38 Gargoyle kern.warn kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Jan  1 01:00:38 Gargoyle kern.notice kernel: [    0.000000] Kernel command line:  board=TL-WR1043ND-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 01:00:38 Gargoyle kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Jan  1 01:00:38 Gargoyle kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.000000] Memory: 61424k/65536k available (2256k kernel code, 4112k reserved, 425k data, 220k init, 0k highmem)
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.000000] NR_IRQS:51
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.000000] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.060000] pid_max: default: 32768 minimum: 301
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.060000] Mount-cache hash table entries: 512
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.070000] NET: Registered protocol family 16
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.070000] gpiochip_add: registered GPIOs 0 to 23 on device: ath79
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.080000] MIPS: machine is TP-LINK TL-WR1043ND v2
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.490000] bio: create slab <bio-0> at 0
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.500000] Switching to clocksource MIPS
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.500000] NET: Registered protocol family 2
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.510000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.510000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.520000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.520000] TCP: Hash tables configured (established 2048 bind 2048)
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.530000] TCP reno registered
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.530000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.540000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.540000] NET: Registered protocol family 1
Jan  1 01:00:38 Gargoyle kern.debug kernel: [    0.550000] PCI: CLS 0 bytes, default 32
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.560000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.560000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.570000] msgmni has been set to 119
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.580000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.590000] io scheduler noop registered
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.590000] io scheduler deadline registered (default)
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.600000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.630000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.630000] console [ttyS0] enabled, bootconsole disabled
Jan  1 01:00:38 Gargoyle kern.warn kernel: [    0.650000] m25p80 spi0.0: found s25fl064k, expected m25p80
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.650000] m25p80 spi0.0: s25fl064k (8192 Kbytes)
Jan  1 01:00:38 Gargoyle kern.notice kernel: [    0.660000] 5 tp-link partitions found on MTD device spi0.0
Jan  1 01:00:38 Gargoyle kern.notice kernel: [    0.660000] Creating 5 MTD partitions on "spi0.0":
Jan  1 01:00:38 Gargoyle kern.notice kernel: [    0.670000] 0x000000000000-0x000000020000 : "u-boot"
Jan  1 01:00:38 Gargoyle kern.notice kernel: [    0.670000] 0x000000020000-0x00000010eef0 : "kernel"
Jan  1 01:00:38 Gargoyle kern.warn kernel: [    0.680000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Jan  1 01:00:38 Gargoyle kern.notice kernel: [    0.690000] 0x00000010eef0-0x0000007f0000 : "rootfs"
Jan  1 01:00:38 Gargoyle kern.warn kernel: [    0.700000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Jan  1 01:00:38 Gargoyle kern.notice kernel: [    0.710000] mtd: partition "rootfs" set to be root filesystem
Jan  1 01:00:38 Gargoyle kern.info kernel: [    0.720000] mtd: partition "rootfs_data" created automatically, ofs=680000, len=170000
Jan  1 01:00:38 Gargoyle kern.notice kernel: [    0.730000] 0x000000680000-0x0000007f0000 : "rootfs_data"
Jan  1 01:00:38 Gargoyle kern.info kernel: [   35.440000] xt_time: kernel timezone is -0000
Jan  1 01:00:38 Gargoyle kern.info kernel: [   35.950000]     Hooked IMQ after mangle on PREROUTING
Jan  1 01:00:38 Gargoyle kern.info kernel: [   35.950000]     Hooked IMQ after nat on POSTROUTING
Jan  1 01:00:38 Gargoyle kern.info kernel: [   35.960000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.100000] Netfilter messages via NETLINK v0.30.
Jan  1 01:00:38 Gargoyle kern.notice kernel: [   36.250000] ip_set: protocol 6
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.690000] usbcore: registered new interface driver cdc_acm
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.690000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.790000] usbcore: registered new interface driver usblp
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.820000] usbcore: registered new interface driver usbserial
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.830000] USB Serial support registered for generic
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.830000] usbcore: registered new interface driver usbserial_generic
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.840000] usbserial: USB Serial Driver core
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.900000] USB Serial support registered for Sierra USB modem
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.910000] usbcore: registered new interface driver sierra
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.910000] sierra: v.1.7.40:USB Driver for Sierra Wireless USB modems
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.930000] usbcore: registered new interface driver sierra_net
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.090000] usbcore: registered new interface driver cdc_wdm
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.110000] usbcore: registered new interface driver cdc_ether
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.220000] usb 1-1: MAC-Address: 0x0c:0x5b:0x8f:0x27:0x9a:0x64
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.230000] cdc_ncm 1-1:1.1: wwan0: register 'cdc_ncm' at usb-ehci-platform.0-1, Mobile Broadband Network Device, 0c:5b:8f:27:9a:64
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.240000] usbcore: registered new interface driver cdc_ncm
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.290000] usbcore: registered new interface driver qmi_wwan
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.310000] usbcore: registered new interface driver rndis_host
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.380000] USB Serial support registered for GSM modem (1-port)
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.390000] option 1-1:1.0: GSM modem (1-port) converter detected
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.390000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.400000] usbcore: registered new interface driver option
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.400000] option: v0.7.2:USB Driver for GSM modems
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.420000] USB Serial support registered for Qualcomm USB modem
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.430000] usbcore: registered new interface driver qcserial
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.530000] fuse init (API version 7.18)
Jan  1 01:00:42 Gargoyle kern.info kernel: [   42.690000] eth1: link up (1000Mbps/Full duplex)
Jan  1 01:00:42 Gargoyle kern.info kernel: [   42.690000] device eth1 entered promiscuous mode
Jan  1 01:00:42 Gargoyle kern.info kernel: [   42.700000] br-lan: port 1(eth1) entered forwarding state
Jan  1 01:00:42 Gargoyle kern.info kernel: [   42.700000] br-lan: port 1(eth1) entered forwarding state
Jan  1 01:00:42 Gargoyle daemon.notice netifd: Interface 'lan' is now up
Jan  1 01:00:42 Gargoyle daemon.notice netifd: Interface 'loopback' is now up
Jan  1 01:00:42 Gargoyle kern.info kernel: [   42.710000] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan  1 01:00:42 Gargoyle kern.info kernel: [   42.920000] eth0: link up (1000Mbps/Full duplex)
Jan  1 01:00:42 Gargoyle kern.info kernel: [   42.920000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan  1 01:00:42 Gargoyle user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Jan  1 01:00:43 Gargoyle daemon.notice netifd: wan (963): Trying to set mode
Jan  1 01:00:43 Gargoyle kern.info kernel: [   43.690000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Jan  1 01:00:44 Gargoyle kern.info kernel: [   44.700000] br-lan: port 1(eth1) entered forwarding state
Jan  1 01:00:45 Gargoyle user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform.0
Jan  1 01:00:47 Gargoyle daemon.notice netifd: wan (963): Trying to set mode
Jan  1 01:00:48 Gargoyle kern.info kernel: [   48.110000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan  1 01:00:48 Gargoyle kern.info kernel: [   48.120000] device wlan0 entered promiscuous mode
Jan  1 01:00:48 Gargoyle kern.info kernel: [   48.290000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:00:48 Gargoyle kern.info kernel: [   48.300000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:00:48 Gargoyle kern.info kernel: [   48.300000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan  1 01:00:50 Gargoyle kern.info kernel: [   50.300000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 03:03:00 Gargoyle daemon.notice netifd: wan (1231): udhcpc (v1.19.4) started
Jan  1 03:03:00 Gargoyle daemon.notice netifd: wan (1231): Sending discover...
Jan  1 03:03:00 Gargoyle user.notice usb-modeswitch: 2-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform.1
Jan  1 03:03:01 Gargoyle authpriv.info dropbear[1347]: Running in background
Jan  1 03:03:01 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
Jan  1 03:03:01 Gargoyle daemon.crit httpd_gargoyle[1404]: bind 0.0.0.0 - Address already in use
Jan  1 03:03:01 Gargoyle daemon.crit httpd_gargoyle[1404]: bind 0.0.0.0 - Address already in use
Jan  1 03:03:01 Gargoyle daemon.warn httpd_gargoyle[1406]: started as root without requesting chroot(), warning only
Jan  1 03:03:01 Gargoyle daemon.notice httpd_gargoyle[1406]: httpd_gargoyle/1.0 14mar2008 starting on Gargoyle, port 80
Jan  1 03:03:01 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
Jan  1 03:03:02 Gargoyle user.notice usb-modeswitch: 1-1:1.2: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
Jan  1 03:03:02 Gargoyle user.notice usb-modeswitch: 1-1:1.3: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
Jan  1 03:03:03 Gargoyle daemon.notice netifd: wan (1231): Sending discover...
Jan  1 03:03:03 Gargoyle user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Jan  1 03:03:03 Gargoyle user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Jan  1 03:03:03 Gargoyle user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Jan  1 03:03:06 Gargoyle daemon.notice netifd: wan (1231): Sending discover...
Jan  1 03:03:07 Gargoyle daemon.info dnsmasq[1944]: started, version 2.66 cachesize 150
Jan  1 03:03:07 Gargoyle daemon.info dnsmasq[1944]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
Jan  1 03:03:07 Gargoyle daemon.info dnsmasq-dhcp[1944]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Jan  1 03:03:07 Gargoyle daemon.info dnsmasq[1944]: using local addresses only for domain lan
Jan  1 03:03:07 Gargoyle daemon.info dnsmasq[1944]: reading /tmp/resolv.conf.auto
Jan  1 03:03:07 Gargoyle daemon.warn dnsmasq[1944]: ignoring nameserver 192.168.1.1 - local interface
Jan  1 03:03:07 Gargoyle daemon.info dnsmasq[1944]: using local addresses only for domain lan
Jan  1 03:03:07 Gargoyle daemon.info dnsmasq[1944]: read /etc/hosts - 2 addresses
Jan  1 03:03:07 Gargoyle daemon.info dnsmasq-dhcp[1944]: read /etc/ethers - 0 addresses
Jan  1 03:03:07 Gargoyle user.err syslog: error starting threads: errno 89 (Function not implemented)
Jan  1 03:03:07 Gargoyle user.info sysinit: exportfs: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Jan  1 03:03:07 Gargoyle user.info sysinit: exportfs: can't lock /var/lib/nfs/etab for writing
Jan  1 03:03:07 Gargoyle user.info sysinit: exportfs: could not open /var/lib/nfs/.xtab.lock for locking: errno 2 (No such file or directory)
Jan  1 03:03:07 Gargoyle user.info sysinit: exportfs: can't lock /var/lib/nfs/xtab for writing
Jan  1 03:03:09 Gargoyle user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Jan  1 03:03:09 Gargoyle user.info sysinit: (Did you specify correct configuration file path?)
Jan  1 03:03:34 Gargoyle user.notice root: vsftpd init: mounted = 0
Jan  1 03:03:34 Gargoyle user.info sysinit: ERROR: No drives attached, no directories to share!
Jan  1 03:03:34 Gargoyle user.info sysinit: setting up led USB
Jan  1 03:03:34 Gargoyle user.info sysinit: setting up led WLAN
Jan  1 03:05:35 Gargoyle daemon.info dnsmasq-dhcp[1944]: DHCPINFORM(br-lan) 192.168.1.235 00:04:4b:80:80:03
Jan  1 03:05:35 Gargoyle daemon.info dnsmasq-dhcp[1944]: DHCPACK(br-lan) 192.168.1.235 00:04:4b:80:80:03 DOM-Komputer
Success

ruter: Linksys WRT3200ACM
AP: TP-Link TL-WR1043ND V2

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,242

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

uci show network

pokaż.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez Cocon

  • Cocon
  • Użytkownik
  • Nieaktywny
  • Skąd: Smardy Dolne k. Kluczborka
  • Zarejestrowany: 2014-09-08
  • Posty: 41

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

teraz jestem w firmie, jak wrócę do domu za godzinę to sprawdzę, tymczasem.

ruter: Linksys WRT3200ACM
AP: TP-Link TL-WR1043ND V2

4 Odpowiedź przez chrobi32

  • Zarejestrowany: 2014-02-14
  • Posty: 39

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

witam mam
podobny zestaw tyle ze cp
może ktoś mi pomoże rozszyfrowac tego loga:
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  2, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1a40 ProdID=0101 Rev= 1.11
S:  Product=USB 2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1506 Rev= 1.02
S:  Manufacturer=HUAWEI Technology
S:  Product=HUAWEI Mobile
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

bo mi net zrywa co jakiś czas
dzieki

5 Odpowiedź przez chrobi32

  • Zarejestrowany: 2014-02-14
  • Posty: 39

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

może jeszcze to pomoże
root@Gargoyle:~# uci show network
network.loopback=interface
network.loopback.ifname=lo
network.loopback.proto=static
network.loopback.ipaddr=127.0.0.1
network.loopback.netmask=255.0.0.0
network.lan=interface
network.lan.ifname=eth1
network.lan.type=bridge
network.lan.proto=static
network.lan.ipaddr=192.168.1.1
network.lan.netmask=255.255.255.0
network.lan.dns=8.8.8.8 8.8.4.4
network.wan=interface
network.wan.proto=ndis
network.wan.device=/dev/ttyUSB0
network.wan.apn=internet.cp
network.wan.mobile_isp=Polska - Cyfrowy Polsat LTE
network.wan.peerdns=0
network.wan.ifname=wwan0
network.wan.service=ndis
network.wan.dns=8.8.8.8 8.8.4.4
network.@switch[0]=switch
network.@switch[0].name=switch0
network.@switch[0].reset=1
network.@switch[0].enable_vlan=1
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device=switch0
network.@switch_vlan[0].vlan=1
network.@switch_vlan[0].ports=0 1 2 3 4
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device=switch0
network.@switch_vlan[1].vlan=2
network.@switch_vlan[1].ports=5 6

root@Gargoyle:~# 3ginfo
Status: Połączony
Czas polaczenia: 0d, 00:19:33
Przeslano danych: 172.3 MiB / 122.9 MiB
Operator: Plus
Tryb pracy: LTE
Sila sygnalu: 58%
Urzadzenie: huawei E3276
MCC MNC: 260 01
LAC: C351 (50001)
LCID: 00307F01 (3178241)
RNC: - (-)
eNB: 00307F (12415)
CID: 0001 (1)
CSQ: 18
RSSI: -77 dBm

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,242

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

@chrobi32: przecież Ci działa. Jak zrywa to połączy się ponownie.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez chrobi32

  • Zarejestrowany: 2014-02-14
  • Posty: 39

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

cześć
często jest tak ze muszę robić restart urządzenia,  a czasem nawet tak ze fizycznie muszę wkładać modem do huba- bo inaczej nie wstanie , zmieniłem ruter na wr1043 z mr3420( myślałem ze będzie ok ) i dalej chyba coś jest nie tak

8 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,242

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

To tu żadnych ustawień nie ma jak Ci się modem wiesza lub nie chce przełączyć.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

9 Odpowiedź przez chrobi32

  • Zarejestrowany: 2014-02-14
  • Posty: 39

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

może  to on jest winny -wymuszam LTE na oryginalnym sofcie z polsatu, a on w garygole pokazuje mi UMTS i brak zasięgu po czym za chwile się łączy i jest w LTE ( myślałem ze to wina huba- jaki jest zapis błędu w połączeniu w czasie odczytu loga?)

10 Odpowiedź przez chrobi32

  • Zarejestrowany: 2014-02-14
  • Posty: 39

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

patrz działał kilkadziesiąt minut nagle zwiecha  moze coś wyczytacie z tego

ep  8 19:39:41 Gargoyle daemon.info dnsmasq[8754]: read /etc/hosts - 2 addresses
Sep  8 19:39:41 Gargoyle daemon.notice netifd: Interface 'wan' is now up
Sep  8 19:39:43 Gargoyle daemon.info dnsmasq[8754]: reading /tmp/resolv.conf.auto
Sep  8 19:39:43 Gargoyle daemon.info dnsmasq[8754]: using nameserver 8.8.4.4#53
Sep  8 19:39:43 Gargoyle daemon.info dnsmasq[8754]: using nameserver 8.8.8.8#53
Sep  8 19:39:43 Gargoyle daemon.info dnsmasq[8754]: using nameserver 8.8.4.4#53
Sep  8 19:39:43 Gargoyle daemon.info dnsmasq[8754]: using nameserver 8.8.8.8#53
Sep  8 19:39:43 Gargoyle daemon.info dnsmasq[8754]: using local addresses only for domain lan
Sep  8 19:40:01 Gargoyle cron.info crond[8338]: crond: USER root pid 8817 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:40:03 Gargoyle daemon.info hostapd: wlan0: STA 08:60:6e:a2:f1:2b IEEE 802.11: authenticated
Sep  8 19:40:03 Gargoyle daemon.info hostapd: wlan0: STA 08:60:6e:a2:f1:2b IEEE 802.11: associated (aid 1)
Sep  8 19:40:03 Gargoyle daemon.info hostapd: wlan0: STA 08:60:6e:a2:f1:2b WPA: pairwise key handshake completed (RSN)
Sep  8 19:40:04 Gargoyle user.notice firewall: Reloading firewall due to ifup of wan (wwan0)
Sep  8 19:40:57 Gargoyle kern.info kernel: [ 2276.320000] ADDRCONF(NETDEV_UP): tmpsta: link is not ready
Sep  8 19:41:00 Gargoyle cron.info crond[9225]: crond: crond (busybox 1.19.4) started, log level 5
Sep  8 19:41:07 Gargoyle cron.info crond[9578]: crond: crond (busybox 1.19.4) started, log level 5
Sep  8 19:42:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9630 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:42:24 Gargoyle authpriv.info dropbear[9636]: Child connection from 192.168.1.201:56987
Sep  8 19:42:33 Gargoyle authpriv.notice dropbear[9636]: Password auth succeeded for 'root' from 192.168.1.201:56987
Sep  8 19:43:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9696 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:44:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9703 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:45:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9709 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:46:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9715 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:47:02 Gargoyle cron.info crond[9578]: crond: USER root pid 9721 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:48:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9727 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:49:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9735 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:49:39 Gargoyle daemon.info hostapd: wlan0: STA 08:60:6e:a2:f1:2b WPA: group key handshake completed (RSN)
Sep  8 19:50:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9745 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:51:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9751 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Sep  8 19:51:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9753 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:51:52 Gargoyle authpriv.info dropbear[9636]: Exit (root): Exited normally
Sep  8 19:52:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9759 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:52:03 Gargoyle authpriv.info dropbear[9765]: Child connection from 192.168.1.201:57022
Sep  8 19:52:11 Gargoyle authpriv.notice dropbear[9765]: Password auth succeeded for 'root' from 192.168.1.201:57022
Sep  8 19:53:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9824 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:54:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9832 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:55:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9838 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:56:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9844 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:57:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9850 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:58:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9942 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:59:01 Gargoyle cron.info crond[9578]: crond: USER root pid 9952 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 19:59:39 Gargoyle daemon.info hostapd: wlan0: STA 08:60:6e:a2:f1:2b WPA: group key handshake completed (RSN)
Sep  8 20:00:01 Gargoyle cron.info crond[9578]: crond: USER root pid 10043 cmd date -u  +"%Y.%m.%d-%H:%M:%S" >/usr/data/time_backup
Sep  8 20:00:01 Gargoyle cron.info crond[9578]: crond: USER root pid 10044 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Sep  8 20:00:01 Gargoyle cron.info crond[9578]: crond: USER root pid 10046 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:00:01 Gargoyle cron.info crond[9578]: crond: USER root pid 10047 cmd /tmp/bw_backup/do_bw_backup.sh
Sep  8 20:01:01 Gargoyle cron.info crond[9578]: crond: USER root pid 10075 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Sep  8 20:01:01 Gargoyle cron.info crond[9578]: crond: USER root pid 10076 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:02:01 Gargoyle cron.info crond[9578]: crond: USER root pid 10083 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:03:01 Gargoyle cron.info crond[9578]: crond: USER root pid 10545 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:04:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11026 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:05:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11032 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:06:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11038 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:07:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11044 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:08:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11050 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:09:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11057 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:09:38 Gargoyle daemon.info hostapd: wlan0: STA 08:60:6e:a2:f1:2b WPA: group key handshake completed (RSN)
Sep  8 20:10:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11063 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:11:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11069 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Sep  8 20:11:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11070 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:12:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11370 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:13:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11476 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:14:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11483 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:15:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11489 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:16:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11495 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:17:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11501 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:18:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11507 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:19:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11514 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:19:38 Gargoyle daemon.info hostapd: wlan0: STA 08:60:6e:a2:f1:2b WPA: group key handshake completed (RSN)
Sep  8 20:20:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11520 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:21:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11526 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Sep  8 20:21:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11527 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:22:01 Gargoyle cron.info crond[9578]: crond: USER root pid 11534 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:23:01 Gargoyle cron.info crond[9578]: crond: USER root pid 12077 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:24:01 Gargoyle cron.info crond[9578]: crond: USER root pid 12583 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:25:01 Gargoyle cron.info crond[9578]: crond: USER root pid 13046 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:26:01 Gargoyle cron.info crond[9578]: crond: USER root pid 13052 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:27:01 Gargoyle cron.info crond[9578]: crond: USER root pid 13718 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:28:01 Gargoyle cron.info crond[9578]: crond: USER root pid 14105 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:29:01 Gargoyle cron.info crond[9578]: crond: USER root pid 14496 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:29:38 Gargoyle daemon.info hostapd: wlan0: STA 08:60:6e:a2:f1:2b WPA: group key handshake completed (RSN)
Sep  8 20:30:01 Gargoyle cron.info crond[9578]: crond: USER root pid 14890 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:31:01 Gargoyle cron.info crond[9578]: crond: USER root pid 15198 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Sep  8 20:31:01 Gargoyle cron.info crond[9578]: crond: USER root pid 15199 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:31:13 Gargoyle authpriv.info dropbear[9765]: Exit (root): Exited normally
Sep  8 20:32:01 Gargoyle cron.info crond[9578]: crond: USER root pid 15206 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:33:01 Gargoyle cron.info crond[9578]: crond: USER root pid 15212 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:34:01 Gargoyle cron.info crond[9578]: crond: USER root pid 15219 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:35:01 Gargoyle cron.info crond[9578]: crond: USER root pid 15317 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:36:01 Gargoyle cron.info crond[9578]: crond: USER root pid 15323 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:37:01 Gargoyle cron.info crond[9578]: crond: USER root pid 15329 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:38:01 Gargoyle cron.info crond[9578]: crond: USER root pid 15335 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:39:01 Gargoyle cron.info crond[9578]: crond: USER root pid 15342 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:39:13 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Sep  8 20:39:13 Gargoyle daemon.notice netifd: wan (15354): Trying to set mode
Sep  8 20:39:14 Gargoyle kern.info kernel: [ 5773.340000] cdc_ncm: wwan0: network connection: disconnected
Sep  8 20:39:17 Gargoyle daemon.notice netifd: wan (8737): Received SIGTERM
Sep  8 20:39:17 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Sep  8 20:39:18 Gargoyle kern.info kernel: [ 5777.470000] ADDRCONF(NETDEV_UP): wwan0: link is not ready
Sep  8 20:39:18 Gargoyle daemon.notice netifd: wan (15409): Trying to set mode
Sep  8 20:39:22 Gargoyle daemon.notice netifd: wan (15409): Trying to set mode
Sep  8 20:39:23 Gargoyle kern.info kernel: [ 5782.480000] cdc_ncm: wwan0: 150 mbit/s downlink 150 mbit/s uplink
Sep  8 20:39:23 Gargoyle kern.info kernel: [ 5782.490000] cdc_ncm: wwan0: network connection: connected
Sep  8 20:39:23 Gargoyle kern.info kernel: [ 5782.490000] ADDRCONF(NETDEV_CHANGE): wwan0: link becomes ready
Sep  8 20:39:23 Gargoyle daemon.info dnsmasq[8754]: reading /tmp/resolv.conf.auto
Sep  8 20:39:23 Gargoyle daemon.info dnsmasq[8754]: using nameserver 8.8.4.4#53
Sep  8 20:39:23 Gargoyle daemon.info dnsmasq[8754]: using nameserver 8.8.8.8#53
Sep  8 20:39:23 Gargoyle daemon.info dnsmasq[8754]: using local addresses only for domain lan
Sep  8 20:39:26 Gargoyle daemon.notice netifd: wan (15423): udhcpc (v1.19.4) started
Sep  8 20:39:26 Gargoyle daemon.notice netifd: wan (15423): Sending discover...
Sep  8 20:39:26 Gargoyle daemon.notice netifd: wan (15423): Sending select for 100.125.83.0...
Sep  8 20:39:26 Gargoyle daemon.notice netifd: wan (15423): Lease of 100.125.83.0 obtained, lease time 518400
Sep  8 20:39:26 Gargoyle daemon.notice netifd: Interface 'wan' is now up
Sep  8 20:39:26 Gargoyle user.notice firewall: Reloading firewall due to ifup of wan (wwan0)
Sep  8 20:39:30 Gargoyle daemon.info dnsmasq[8754]: reading /tmp/resolv.conf.auto
Sep  8 20:39:30 Gargoyle daemon.info dnsmasq[8754]: using nameserver 8.8.4.4#53
Sep  8 20:39:30 Gargoyle daemon.info dnsmasq[8754]: using nameserver 8.8.8.8#53
Sep  8 20:39:30 Gargoyle daemon.info dnsmasq[8754]: using nameserver 8.8.4.4#53
Sep  8 20:39:30 Gargoyle daemon.info dnsmasq[8754]: using nameserver 8.8.8.8#53
Sep  8 20:39:30 Gargoyle daemon.info dnsmasq[8754]: using local addresses only for domain lan
Sep  8 20:39:38 Gargoyle daemon.info hostapd: wlan0: STA 08:60:6e:a2:f1:2b WPA: group key handshake completed (RSN)
Sep  8 20:40:01 Gargoyle cron.info crond[9578]: crond: USER root pid 15717 cmd /usr/lib/gargoyle/ping_watchdog.sh 240 3 8.8.8.8 wan
Sep  8 20:40:13 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Sep  8 20:40:13 Gargoyle daemon.notice netifd: wan (15752): Trying to set mode
Sep  8 20:40:17 Gargoyle daemon.notice netifd: wan (15423): Received SIGTERM
Sep  8 20:40:17 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Sep  8 20:40:18 Gargoyle daemon.notice netifd: wan (15888): Trying to set mode
Sep  8 20:40:19 Gargoyle daemon.info dnsmasq[8754]: reading /tmp/resolv.conf.auto
Sep  8 20:40:19 Gargoyle daemon.info dnsmasq[8754]: using nameserver 8.8.4.4#53
Sep  8 20:40:19 Gargoyle daemon.info dnsmasq[8754]: using nameserver 8.8.8.8#53
Sep  8 20:40:19 Gargoyle daemon.info dnsmasq[8754]: using local addresses only for domain lan
Sep  8 20:40:22 Gargoyle daemon.notice netifd: wan (15888): Trying to set mode
Sep  8 20:40:22 Gargoyle cron.info crond[15913]: crond: crond (busybox 1.19.4) started, log level 5
Sep  8 20:40:23 Gargoyle daemon.notice netifd: wan (15888): Error setting WWAN mode!
Sep  8 20:40:26 Gargoyle daemon.notice netifd: wan (15993): udhcpc (v1.19.4) started
Sep  8 20:40:26 Gargoyle daemon.notice netifd: wan (15993): Sending discover...
Sep  8 20:40:26 Gargoyle daemon.notice netifd: wan (15993): Sending select for 100.125.83.0...
Sep  8 20:40:26 Gargoyle daemon.notice netifd: wan (15993): Lease of 100.125.83.0 obtained, lease time 518400
Sep  8 20:40:26 Gargoyle daemon.notice netifd: Interface 'wan' is now up
Sep  8 20:40:29 Gargoyle cron.info crond[16030]: crond: crond (busybox 1.19.4) started, log level 5
Sep  8 20:40:30 Gargoyle daemon.info dnsmasq[8754]: reading /tmp/resolv.conf.auto
Sep  8 20:40:30 Gargoyle daemon.info dnsmasq[8754]: using nameserver 8.8.4.4#53
Sep  8 20:40:30 Gargoyle daemon.info dnsmasq[8754]: using nameserver 8.8.8.8#53
Sep  8 20:40:30 Gargoyle daemon.info dnsmasq[8754]: using nameserver 8.8.4.4#53
Sep  8 20:40:30 Gargoyle daemon.info dnsmasq[8754]: using nameserver 8.8.8.8#53
Sep  8 20:40:30 Gargoyle daemon.info dnsmasq[8754]: using local addresses only for domain lan
Sep  8 20:40:37 Gargoyle cron.info crond[16512]: crond: crond (busybox 1.19.4) started, log level 5
Sep  8 20:40:38 Gargoyle kern.info kernel: [ 5857.510000] cdc_ncm: wwan0: network connection: disconnected
Success



już od zmysłów odchodzę restart i działa - pomocy!

11 Odpowiedź przez chrobi32

  • Zarejestrowany: 2014-02-14
  • Posty: 39

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

a teraz co się stało:))
logread: can't find syslogd buffer: No such file or directory
Success
idę spać:)

12 Odpowiedź przez Cocon

  • Cocon
  • Użytkownik
  • Nieaktywny
  • Skąd: Smardy Dolne k. Kluczborka
  • Zarejestrowany: 2014-09-08
  • Posty: 41

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

witam, trochę poszperałem na forum i znalazłem odpowiedź tutaj http://eko.one.pl/forum/viewtopic.php?id=7236, ustawiłem interfejs WAN na wwan0 i pomogło internet już jest, teraz zabawa z optymalizacją, dziękuję Cezary za tę pomocną dłoń.

ruter: Linksys WRT3200ACM
AP: TP-Link TL-WR1043ND V2

13 Odpowiedź przez Cocon

  • Cocon
  • Użytkownik
  • Nieaktywny
  • Skąd: Smardy Dolne k. Kluczborka
  • Zarejestrowany: 2014-09-08
  • Posty: 41

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

Cezary mam jeszcze takie pytanie, chciałbym odpalić wizualizację statusu połączenia 3G (komórkowego) przez stronę www, tak jak tu http://eko.one.pl/?p=openwrt-3ginfo#inf … gnostyczne, projekt 3ginfo zainstalowałem w ruterze ale coś nie widzę tej wizualizacji jak wpiszę adres rutera na www, czyli http://192.168.2.1:81 czy możesz coś podpowiedzieć?

uci show 3ginfo
3ginfo.@3ginfo[0]=3ginfo
3ginfo.@3ginfo[0].http_port=81
3ginfo.@3ginfo[0].qos=0
3ginfo.@3ginfo[0].language=pl
3ginfo.@3ginfo[0].device=/dev/ttyUSB0


3ginfo-test

+CSQ: 21,99
^SYSINFOEX:2,3,0,1,,6,"LTE",101,"LTE"
^SYSINFO:2,3,0,5,1,,4
+COPS: 0,2,"26001",7
+CREG: 2,1,"7149","004E9803"
+CGREG: 2,1,"7149","004E9803"
+CGEQNEG: 1,2,64000,128000,0,0,0,1500,"1E3","1E5",0,100,2
DEVICE:huawei E3276
---------------------------------------------------------------
/dev/tty      /dev/ttyS10   /dev/ttyS13   /dev/ttyS2    /dev/ttyS5    /dev/ttyS8
/dev/ttyS0    /dev/ttyS11   /dev/ttyS14   /dev/ttyS3    /dev/ttyS6    /dev/ttyS9
/dev/ttyS1    /dev/ttyS12   /dev/ttyS15   /dev/ttyS4    /dev/ttyS7    /dev/ttyUSB0
---------------------------------------------------------------

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1506 Rev= 1.02
S:  Manufacturer=HUAWEI Technology
S:  Product=HUAWEI Mobile
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
---------------------------------------------------------------
3ginfo.@3ginfo[0]=3ginfo
3ginfo.@3ginfo[0].http_port=81
3ginfo.@3ginfo[0].qos=0
3ginfo.@3ginfo[0].language=pl
3ginfo.@3ginfo[0].device=/dev/ttyUSB0
root@Gargoyle:~# /etc/config/3ginfo
-ash: /etc/config/3ginfo: Permission denied
root@Gargoyle:~# uci show 3ginfo
3ginfo.@3ginfo[0]=3ginfo
3ginfo.@3ginfo[0].http_port=81
3ginfo.@3ginfo[0].qos=0
3ginfo.@3ginfo[0].language=pl
3ginfo.@3ginfo[0].device=/dev/ttyUSB0
root@Gargoyle:~# uci set 3ginfo.@3ginfo[0].device=/dev/ttyUSB1
root@Gargoyle:~# uci commit 3ginfo
root@Gargoyle:~# uci show 3ginfo
3ginfo.@3ginfo[0]=3ginfo
3ginfo.@3ginfo[0].http_port=81
3ginfo.@3ginfo[0].qos=0
3ginfo.@3ginfo[0].language=pl
3ginfo.@3ginfo[0].device=/dev/ttyUSB1
root@Gargoyle:~# /etc/config/3ginfo
-ash: /etc/config/3ginfo: Permission denied
root@Gargoyle:~#
root@Gargoyle:~# uci set 3ginfo.@3ginfo[0].device=/dev/ttyUSB2
root@Gargoyle:~# uci commit 3ginfo
root@Gargoyle:~# uci show 3ginfo
3ginfo.@3ginfo[0]=3ginfo
3ginfo.@3ginfo[0].http_port=81
3ginfo.@3ginfo[0].qos=0
3ginfo.@3ginfo[0].language=pl
3ginfo.@3ginfo[0].device=/dev/ttyUSB2
root@Gargoyle:~# 3ginfo-test
Brak urzadzenia /dev/ttyUSB2!
root@Gargoyle:~# uci set 3ginfo.@3ginfo[0].device=/dev/ttyUSB1
root@Gargoyle:~# uci commit 3ginfo
root@Gargoyle:~# uci show 3ginfo
3ginfo.@3ginfo[0]=3ginfo
3ginfo.@3ginfo[0].http_port=81
3ginfo.@3ginfo[0].qos=0
3ginfo.@3ginfo[0].language=pl
3ginfo.@3ginfo[0].device=/dev/ttyUSB1
root@Gargoyle:~# 3ginfo-test
Brak urzadzenia /dev/ttyUSB1!
root@Gargoyle:~# uci set 3ginfo.@3ginfo[0].device=/dev/ttyUSB0
root@Gargoyle:~# uci commit 3ginfo
root@Gargoyle:~# uci show 3ginfo
3ginfo.@3ginfo[0]=3ginfo
3ginfo.@3ginfo[0].http_port=81
3ginfo.@3ginfo[0].qos=0
3ginfo.@3ginfo[0].language=pl
3ginfo.@3ginfo[0].device=/dev/ttyUSB0
root@Gargoyle:~#
root@Gargoyle:~# 3ginfo-test

+CSQ: 22,99
^SYSINFOEX:2,3,0,1,,6,"LTE",101,"LTE"
^SYSINFO:2,3,0,5,1,,4
+COPS: 0,2,"26001",7
+CREG: 2,1,"7149","004E9803"
+CGREG: 2,1,"7149","004E9803"
+CGEQNEG: 1,2,64000,128000,0,0,0,1500,"1E3","1E5",0,100,2
DEVICE:huawei E3276
---------------------------------------------------------------
/dev/tty      /dev/ttyS10   /dev/ttyS13   /dev/ttyS2    /dev/ttyS5    /dev/ttyS8
/dev/ttyS0    /dev/ttyS11   /dev/ttyS14   /dev/ttyS3    /dev/ttyS6    /dev/ttyS9
/dev/ttyS1    /dev/ttyS12   /dev/ttyS15   /dev/ttyS4    /dev/ttyS7    /dev/ttyUSB0
---------------------------------------------------------------

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1506 Rev= 1.02
S:  Manufacturer=HUAWEI Technology
S:  Product=HUAWEI Mobile
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
---------------------------------------------------------------
3ginfo.@3ginfo[0]=3ginfo
3ginfo.@3ginfo[0].http_port=81
3ginfo.@3ginfo[0].qos=0
3ginfo.@3ginfo[0].language=pl
3ginfo.@3ginfo[0].device=/dev/ttyUSB0

ruter: Linksys WRT3200ACM
AP: TP-Link TL-WR1043ND V2

14 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,242

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

/etc/init.d/3ginfo start...

Jeżeli Ci wystarczy to po prostu plugin 3ginfo do garogoyle zainstaluj.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

15 Odpowiedź przez Cocon

  • Cocon
  • Użytkownik
  • Nieaktywny
  • Skąd: Smardy Dolne k. Kluczborka
  • Zarejestrowany: 2014-09-08
  • Posty: 41

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

zrobiłem tak:

root@Gargoyle:~# opkg update
Downloading package list for attitude_adjustment source...
Package list for attitude_adjustment downloaded successfully.

Downloading package list for 3ginfo source...
Package list for 3ginfo downloaded successfully.

Downloading package list for eko1 source...
Package list for eko1 downloaded successfully.

Downloading package list for gargoylepl_plugins source...
Package list for gargoylepl_plugins downloaded successfully.

Downloading package list for gargoylepl_packages source...
Package list for gargoylepl_packages downloaded successfully.

root@Gargoyle:~# opkg install 3ginfo
Preparing to install the following packages, which will require 30966 bytes:
        uhttpd, 3ginfo

Preparing to install package uhttpd...
        Downloading...
        Downloaded uhttpd successfully.
        Installing uhttpd...
        Successfully installed uhttpd.
Preparing to install package 3ginfo...
        Downloading...
        Downloaded 3ginfo successfully.
        Installing 3ginfo...
        Successfully installed 3ginfo.
Installation of packages successful.

root@Gargoyle:~# /etc/init.d/3ginfo enable
root@Gargoyle:~# /etc/init.d/3ginfo start

Dzięki bardzo Cezary zadziałało smile

ruter: Linksys WRT3200ACM
AP: TP-Link TL-WR1043ND V2

16 Odpowiedź przez Cocon

  • Cocon
  • Użytkownik
  • Nieaktywny
  • Skąd: Smardy Dolne k. Kluczborka
  • Zarejestrowany: 2014-09-08
  • Posty: 41

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

http://files.tinypic.pl/i/00575/bg3q5elffavi_t.jpg

Tak wygląda teraz status, fajnie to działa i już wiem do jakiego BTSa jestem podłączony po numerze eNB bo mam do dyspozycji 3 i będę próbował podłączyć się do najlepszego. Fajnie by było jeszcze widzieć jego nazwę i tu jest pytanie, Cezary gdzie mam i jak wrzucić ten pliczek z BtS'ami, 26001.clf

ruter: Linksys WRT3200ACM
AP: TP-Link TL-WR1043ND V2

17 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,242

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

A gdzie chcesz, przecież to ty w konfigu określasz gdzie jest plik dostępny.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

18 Odpowiedź przez Cocon

  • Cocon
  • Użytkownik
  • Nieaktywny
  • Skąd: Smardy Dolne k. Kluczborka
  • Zarejestrowany: 2014-09-08
  • Posty: 41

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

uci set 3ginfo.@3ginfo[0].clf='/tmp/26001.clf'
uci commit 3ginfo

chyba taką składnię muszę wpisać, żeby go na ruter wrzucić, bo modem mam wpięty bezpośrednio do rutera, i nie mam w nim karty SD, czy tak?

ruter: Linksys WRT3200ACM
AP: TP-Link TL-WR1043ND V2

19 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,242

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

Tylko żebyś pamięci nie zapchał jeżeli plik jest duży.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

20 Odpowiedź przez Cocon

  • Cocon
  • Użytkownik
  • Nieaktywny
  • Skąd: Smardy Dolne k. Kluczborka
  • Zarejestrowany: 2014-09-08
  • Posty: 41

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

Zrobiłem, ale coś nie pokazuje nazwy BTS'a

root@Gargoyle:~# 3ginfo-test

+CSQ: 20,99
^SYSINFOEX:2,3,0,1,,6,"LTE",101,"LTE"
^SYSINFO:2,3,0,5,1,,4
+COPS: 0,2,"26001",7
+CREG: 2,1,"7149","004E9803"
+CGREG: 2,1,"7149","004E9803"
+CGEQNEG: 1,2,64000,128000,0,0,0,1500,"1E3","1E5",0,100,2
DEVICE:huawei E3276
---------------------------------------------------------------
/dev/tty      /dev/ttyS10   /dev/ttyS13   /dev/ttyS2    /dev/ttyS5    /dev/ttyS8
/dev/ttyS0    /dev/ttyS11   /dev/ttyS14   /dev/ttyS3    /dev/ttyS6    /dev/ttyS9
/dev/ttyS1    /dev/ttyS12   /dev/ttyS15   /dev/ttyS4    /dev/ttyS7    /dev/ttyUSB0
---------------------------------------------------------------

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1506 Rev= 1.02
S:  Manufacturer=HUAWEI Technology
S:  Product=HUAWEI Mobile
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
---------------------------------------------------------------
3ginfo.@3ginfo[0]=3ginfo
3ginfo.@3ginfo[0].http_port=81
3ginfo.@3ginfo[0].qos=0
3ginfo.@3ginfo[0].language=pl
3ginfo.@3ginfo[0].device=/dev/ttyUSB0
3ginfo.@3ginfo[0].clf=/tmp/26001.clf

ruter: Linksys WRT3200ACM
AP: TP-Link TL-WR1043ND V2

21 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,242

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

Więc odszukaj czy w te dane 260/01/7149/9803 masz w ogóle w pliku.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

22 Odpowiedź przez Cocon

  • Cocon
  • Użytkownik
  • Nieaktywny
  • Skąd: Smardy Dolne k. Kluczborka
  • Zarejestrowany: 2014-09-08
  • Posty: 41

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

Nie nie mam takiego ciągu znaków

ruter: Linksys WRT3200ACM
AP: TP-Link TL-WR1043ND V2

23 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,242

Odp: WR-1043ND-V2 z gargoyle i huawei e3276s-150 w PLUS brak LTE

Jak nie masz tam takich danych (nie / tylko oddzielonych średnikami) to i 3ginfo nic nie wyświetli, no sorry.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona