776

Odp: Modem od routera MF286D

PiotrekK napisał/a:

Have you put proper APN? The wrong one limits the Internet connection only.

I did create a custom profile and set all the parameters by hand, but nothing changed.

PiotrekK napisał/a:

Or, you have another problem that the modem does not want to register with that SIM card.
Which one is your case, could you advise?

I see no error and I even received a SMS whilst using that SIM, so I surmise it's not a registration problem.

PiotrekK napisał/a:

As to the second question: What kind of update do you mean?

I understand Nordic b14 came out, but the update check fails...

Regards

777

Odp: Modem od routera MF286D

I assume you use a factory firmware, right? If so, I cannot tell you what to do next.

MF286D, r28557, Kernel 6.6.70
AW1000, r28636, Kernel 6.6.71
Poprawiamy tłumaczenie LuCI. Szczegóły w tym poście
Wypełnij ankietę.

778

Odp: Modem od routera MF286D

PiotrekK napisał/a:

I assume you use a factory firmware, right? If so, I cannot tell you what to do next.

For completeness, I found out that the connection actually worked (I double-checked with an ethernet one), but the ZTE update server doesn't.

Are there other reports about this b14 firmware? Parts of it should be an openwrt concern too.

779

Odp: Modem od routera MF286D

Thank you happycamper.
The available description of the new B14 looks promising but from the OpenWRT system level I cannot check the ZTE server's problem. I do not use the factory software.
If the B14 is available to make the upgrade by hand I will do so.

MF286D, r28557, Kernel 6.6.70
AW1000, r28636, Kernel 6.6.71
Poprawiamy tłumaczenie LuCI. Szczegóły w tym poście
Wypełnij ankietę.

780 (edytowany przez happycamper 2024-10-25 13:04:49)

Odp: Modem od routera MF286D

PiotrekK napisał/a:

Thank you happycamper.
The available description of the new B14 looks promising but from the OpenWRT system level I cannot check the ZTE server's problem. I do not use the factory software.

I understand. FYI (and everyone else's), the servers it attempt to contact are dmeu.ztems.com:443 and dleu.ztems.com:443.

PiotrekK napisał/a:

If the B14 is available to make the upgrade by hand I will do so.

Via the ZTE Framework you mean? And were, to your knowledge, Elisa or Play or anything else updated to the same effect, modem-wise?

Regards

EDIT: using this script, b14 is effectively available and I can download it.
I wonder if it might just be a matter of IMEI at this point.

781 (edytowany przez frutis 2024-10-25 14:44:21)

Odp: Modem od routera MF286D

happycamper napisał/a:

EDIT: using this script, b14 is effectively available and I can download it.

Can you post the url for update file?

EDIT: Nordic_MF286D_B14: http://dleu.ztems.com:80/zxmdmp/downloa … .0.1B02.up

A skrypt do aktualizacji ustawia:

#Set the added and modified parameters
nv set net_select="Only_LTE"
nv set default_lte_band_lock="0x2008080045"
nv set default_gw_band_lock="0x2000000400000"
nv set lte_band_lock="0x2008080045"
nv set gw_band_lock="0x2000000400000"
nv set fota_net_set="1"
nv set cr_version="Nordic_MF286D_B14"
nv set cr_inner_version="CR_TELIAMF286DV1.0.0B14"
nv set integrate_version="TELIA_MF286DV1.0.1B02"
nv set integrate_release_version="TELIA_MF286DV1.0.1B02"
nv set gsspone="ONW2Xh6dWMeFgj4biPKE"
nv set zte_dst_datastall_monitor_switch="1"
nv set DDNSProvider_default="no-ip.com;zoneedit.com;dyndns.org;freedns.afraid.org;"
nv set zte_syslog_enable="1"
nv set syslog_level="1"
nv set syslog_path="/etc_rw/log"
nv set key_local_id="0"
nv set key_syslog_name="key.log"
nv set key_syslog_size="512"
nv set cutoff_detect_switch="1"
nv set cutoff_net_link_detect_url_0="8.8.8.8"
nv set cutoff_net_link_detect_url_1=""
nv set cutoff_net_link_detect_url_2=""
nv set cutoff_net_link_detect_url_3="8.8.8.8"
nv set cutoff_net_link_detect_ping_times="2"
nv set cutoff_net_link_detect_timeout="5"
nv set log_manage_switch="0"

#Set the deleted parameters
nv set https_ServiceURL=""
nv set https_ServiceURL_bk=""
nv set https_ReportServiceURL=""
nv set tcm_server_url=""

782

Odp: Modem od routera MF286D

frutis napisał/a:
happycamper napisał/a:

EDIT: using this script, b14 is effectively available and I can download it.

Can you post the url for update file?

EDIT: Nordic_MF286D_B14: http://dleu.ztems.com:80/zxmdmp/downloa … .0.1B02.up

A skrypt do aktualizacji ustawia:
<omissis>

I suppose one could also use the TFTP method to upgrade, but I wouldn't want to force things.
Interesting the bit about DDNS, perhaps they support it now? Not that it would help much with CGNAT, but still...

783

Odp: Modem od routera MF286D

frutis napisał/a:
happycamper napisał/a:

EDIT: using this script, b14 is effectively available and I can download it.

Can you post the url for update file?

EDIT: Nordic_MF286D_B14: http://dleu.ztems.com:80/zxmdmp/downloa … .0.1B02.up

What's the outcome? Have you upgraded the modem?

MF286D, r28557, Kernel 6.6.70
AW1000, r28636, Kernel 6.6.71
Poprawiamy tłumaczenie LuCI. Szczegóły w tym poście
Wypełnij ankietę.

784

Odp: Modem od routera MF286D

Zauważcie że to zmieniło oznaczenia. Modem będzie jako 1.0.0B14 ale "integrate_version" już 1.0.1B02

Syslog doszedł i ddns i jak by sprawdzanie stanu łącza przez pingowanie googli?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

785

Odp: Modem od routera MF286D

Po upgrade zgłasza się tak:

Manufacturer: ZTE CORPORATION
Model: MF286DMODULE
Revision: BD_TELIAMF286DV1.0.0B14
SVN: 14
IMEI: .........................
+GCAP: +CGSM

MF286D, r28557, Kernel 6.6.70
AW1000, r28636, Kernel 6.6.71
Poprawiamy tłumaczenie LuCI. Szczegóły w tym poście
Wypełnij ankietę.

786 (edytowany przez happycamper 2024-10-25 19:09:21)

Odp: Modem od routera MF286D

PiotrekK napisał/a:

Po upgrade zgłasza się tak:

How did you perform the upgrade? FOTA or did it require some trickery?

EDIT: does the UI show DDNS support now?

787 (edytowany przez PiotrekK 2024-10-25 19:33:09)

Odp: Modem od routera MF286D

I have used the OpenWRT via WiFi and SSH.
I have not seen the DDNS yet.

MF286D, r28557, Kernel 6.6.70
AW1000, r28636, Kernel 6.6.71
Poprawiamy tłumaczenie LuCI. Szczegóły w tym poście
Wypełnij ankietę.

788

Odp: Modem od routera MF286D

@frutis Udało Ci się zrobić ten upgrade?

MF286D, r28557, Kernel 6.6.70
AW1000, r28636, Kernel 6.6.71
Poprawiamy tłumaczenie LuCI. Szczegóły w tym poście
Wypełnij ankietę.

789

Odp: Modem od routera MF286D

Cezary napisał/a:

Zauważcie że to zmieniło oznaczenia. Modem będzie jako 1.0.0B14 ale "integrate_version" już 1.0.1B02

Syslog doszedł i ddns i jak by sprawdzanie stanu łącza przez pingowanie googli?

Jak uruchomić tą komendę nv?

MF286D, r28557, Kernel 6.6.70
AW1000, r28636, Kernel 6.6.71
Poprawiamy tłumaczenie LuCI. Szczegóły w tym poście
Wypełnij ankietę.

790

Odp: Modem od routera MF286D

no w ori fw nv to jak uci ...

791 (edytowany przez PiotrekK 2024-10-25 20:55:23)

Odp: Modem od routera MF286D

Modem się zupgradował, ale LED się cały czas świeci na niebiesko (nie mruga) i nie mogę z nim dojść do ładu. Gada po USB, przedstawia się, ma dobry APN, ale połączyć się nie chce.

MF286D, r28557, Kernel 6.6.70
AW1000, r28636, Kernel 6.6.71
Poprawiamy tłumaczenie LuCI. Szczegóły w tym poście
Wypełnij ankietę.

792

Odp: Modem od routera MF286D

PiotrekK napisał/a:

@frutis Udało Ci się zrobić ten upgrade?

Nie robiłem aktualizacji tylko skryptem wyszukałem nową wersję.

793

Odp: Modem od routera MF286D

Ja zrobiłem... Na MF286D z Nordica ( z zainstalowanym openwrt ,modemem podniesionym do B12)  wrzuciłem s powrotem partycję mtd8 i mtd9 z B12 ( na żywca przez mtd update..)  , po czym po uruchomieniu orginału i wyszukaniu update znalazł je i się zaktualizował.
macie ten plik z B12 na BB14 ? Da się jakoś ściągnąć ,czy mimo to trzeba go z modemu ? No i backup partycji mtd8 i mtd9 by się też przydał z B14

794

Odp: Modem od routera MF286D

Zrobiłeś na oprogramowaniu ZTE i dobrze działa? Spróbuj na OpenWRT, bo u mnie nie chce banglać.
Pobierz ten plik
http://dleu.ztems.com/zxmdmp/download.d … .0.1B02.up

Zmień rozszerzenie *.up na *.zip i już masz pliki.

MF286D, r28557, Kernel 6.6.70
AW1000, r28636, Kernel 6.6.71
Poprawiamy tłumaczenie LuCI. Szczegóły w tym poście
Wypełnij ankietę.

795

Odp: Modem od routera MF286D

Tak , na razie na orginale działa dobrze.

796

Odp: Modem od routera MF286D

PiotrekK napisał/a:

Zrobiłeś na oprogramowaniu ZTE i dobrze działa?
Zmień rozszerzenie *.up na *.zip i już masz pliki.

I'm currently connected via serial, I've tried changing the IMEI, but Nordic B12 will still fail to perform FOTA,
with this on syslog:

DM_RemoveFile name /etc_rw/config/tree_zdm.xml
DM_RemoveFile name /etc_rw/config/FUMO_SESSION_KEY_dlResumeData.txt.0
DM_RemoveFile name /etc_rw/fota/image.zip

Any idea what else I might check before doing everything by hand?

797

Odp: Modem od routera MF286D

I had the same with mine one. The ZTE does not want to upgrade itself. I had to reinstall OpenWRT. Unfortunately, the OpenWRT does not work with it neither.

MF286D, r28557, Kernel 6.6.70
AW1000, r28636, Kernel 6.6.71
Poprawiamy tłumaczenie LuCI. Szczegóły w tym poście
Wypełnij ankietę.

798 (edytowany przez happycamper 2024-10-26 10:06:25)

Odp: Modem od routera MF286D

PiotrekK napisał/a:

I had the same with mine one. The ZTE does not want to upgrade itself. I had to reinstall OpenWRT. Unfortunately, the OpenWRT does not work with it neither.

I read a report in another forum from an user claiming to have managed to update to b14, but it wasn't a native nordic device.
He couldn't tell me more because the operation was performed remotely.

EDIT: I did it! Now I can see Nordic_MF286D_B14.
The trick apparently is that one has to enable automatic updates, possibly reboot and then recheck by hand.

Trouble is, I can't login from console anymore, not even with the usual password. I remember seeing something during the boot that changed it, but now no more?

799

Odp: Modem od routera MF286D

Congrats!

MF286D, r28557, Kernel 6.6.70
AW1000, r28636, Kernel 6.6.71
Poprawiamy tłumaczenie LuCI. Szczegóły w tym poście
Wypełnij ankietę.

800

Odp: Modem od routera MF286D

PiotrekK napisał/a:

Congrats!

Thanks:)

I booted openwrt via tftp, do you happen to know how to mount mtd partitions from there?
Are they in a special format?