• Zarejestrowany: 2012-01-13
  • Posty: 1,519

Temat: Instalacja mjpg-streamer Gargoyle 1.12.0

Próbuję w angielskiej wersji Gargoyle doinstalować mjpg-streamer, ale niestety nie ma dostępnego tego pakietu 

 opkg install mjpg-streamer
ERROR: No package named mjpg-streamer found, try updating your package lists

. Czy można zainstalować go z innego źródła/jakiego? 

 
Device Name:Gargoyle
Gargoyle Version:1.12.0
Model:D-Link DIR-825 rev. B1
Device Configuration:Gateway
Memory Usage:19MB / 58.6MB (32.4%)
Connections:27/4096
CPU Load Averages:0.00 / 0.00 / 0.00 (1/5/15 minutes

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,993

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

Z repo openwrt: https://downloads.openwrt.org/releases/ … /packages/

Tylko czy na pewno to chcesz jak gargoyle ma swój: gargoyle-mjpg-streamer który jest używany przez plugin-gargoyle-webcam?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez jarek7714

  • Zarejestrowany: 2012-01-13
  • Posty: 1,519

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

Z Gargoyle nie mogę (25% flash mam zablokowane-mam firmware sysupgrade a nie fat), każdy KB pamięci jest ważny, a zainstalowałem już OpenVPN. Cezary zainstalowałem z podanego linku, ale mi nie działa, czy wymaga jakiegoś specjalnego uruchomienia? (wpisałem polecenia z instalacji https://eko.one.pl/?p=openwrt-webcam ).

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,993

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

W zależności od wersji jaką masz - albo uruchamiasz ręcznie albo w /etc/config musisz to sobie najpierw odblokować.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez jarek7714

  • Zarejestrowany: 2012-01-13
  • Posty: 1,519

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

Cezary napisał/a:

W zależności od wersji jaką masz - albo uruchamiasz ręcznie albo w /etc/config musisz to sobie najpierw odblokować.

Mam dokładnie tą z linku (instalowałem poprzez wget/tmp), a jak to odblokować w /etc/config?

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,993

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

Nadal nie wiem jaką masz wersję. Zobacz czy w /etc/config masz plik od mjpg-streamer, jeżeli tak to zobacz jego zawartość.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez jarek7714

  • Zarejestrowany: 2012-01-13
  • Posty: 1,519

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

Mam mjpg-streamer_r182-10_mips_24kc.ipk, jakim poleceniem sprawdzić konfig /etc/config mjpg-streamer?

8 Odpowiedź przez Cezary (edytowany przez Cezary 2020-11-25 19:31:31)

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,993

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

ls /etc/config/mjpg-streamer

uci show mjpg-streamer

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

9 Odpowiedź przez jarek7714

  • Zarejestrowany: 2012-01-13
  • Posty: 1,519

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

Mam coś takiego 

 root@Gargoyle:~# ls /etc/config
dhcp              mjpg-streamer     qos_gargoyle      webmon_gargoyle
dropbear          network           system            wireless
firewall          openvpn           ubootenv
gargoyle          openvpn_gargoyle  uhttpd

.

10 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,993

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

No masz. Włącz sobie w nim enabled, ustaw co potrzebujesz, zrestartuj demona.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

11 Odpowiedź przez jarek7714

  • Zarejestrowany: 2012-01-13
  • Posty: 1,519

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

Włączam wg poradnika z eko ale nie działa sad

12 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,993

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

I co masz w logach? smile

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

13 Odpowiedź przez jarek7714

  • Zarejestrowany: 2012-01-13
  • Posty: 1,519

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

Coś takiego 

 root@Gargoyle:~# logread
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    0.000000] Linux version 4.9.198 (eric@Osiris) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7897-9d401013fc) ) #0 Tue Nov 5 14:12:18 2019
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    0.000000] MyLoader: sysp=aaaa5554, boardp=aaaa5554, parts=aaaa5554
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] SoC: Atheros AR7161 rev 2
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] Determined physical RAM map:
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000]  memory: 04000000 @ 00000000 (usable)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Wed Nov 25 20:07:48 2020 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Wed Nov 25 20:07:48 2020 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] Zone ranges:
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] Movable zone start for each node
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] Early memory node ranges
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    0.000000] On node 0 totalpages: 16384
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 8047c7c4, node_mem_map 81000020
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    0.000000]   Normal zone: 128 pages used for memmap
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    0.000000] Kernel command line:  board=DIR-825-B1 console=ttyS0,115200 mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy) rootfstype=squashfs noinitrd
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] Memory: 59776K/65536K available (3235K kernel code, 168K rwdata, 808K rodata, 324K init, 205K bss, 5760K reserved, 0K cma-reserved)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] NR_IRQS:51
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] Clocks: CPU:680.000MHz, DDR:340.000MHz, AHB:170.000MHz, Ref:40.000MHz
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5621354254 ns
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.000008] sched_clock: 32 bits at 340MHz, resolution 2ns, wraps every 6316128254ns
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.007798] Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.070516] pid_max: default: 32768 minimum: 301
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.075215] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.081820] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.091042] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.100900] futex hash table entries: 256 (order: -1, 3072 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.107448] NET: Registered protocol family 16
Wed Nov 25 20:07:48 2020 kern.info kernel: [    0.113037] MIPS: machine is D-Link DIR-825 rev. B1
Wed Nov 25 20:07:48 2020 kern.warn kernel: [    0.421290] registering PCI controller with io_map_base unset
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    2.578027] random: fast init done
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.818940] PCI host bridge to bus 0000:00
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.823048] pci_bus 0000:00: root bus resource [mem 0x10000000-0x16ffffff]
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.829948] pci_bus 0000:00: root bus resource [io  0x0000]
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.835508] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.842287] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    2.850237] pci 0000:00:11.0: [168c:ff1d] type 00 class 0x020000
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.850247] pci 0000:00:11.0: fixup device configuration
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    2.856772] pci 0000:00:11.0: reg 0x10: [mem 0x00000000-0x0000ffff]
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    2.856838] pci 0000:00:11.0: PME# supported from D0 D3hot
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    2.857023] pci 0000:00:12.0: [168c:ff1d] type 00 class 0x020000
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.857032] pci 0000:00:12.0: fixup device configuration
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    2.863547] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x0000ffff]
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    2.863604] pci 0000:00:12.0: PME# supported from D0 D3hot
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    2.863763] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.863788] pci 0000:00:11.0: BAR 0: assigned [mem 0x10000000-0x1000ffff]
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.870591] pci 0000:00:12.0: BAR 0: assigned [mem 0x10010000-0x1001ffff]
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.877377] pci 0000:00:11.0: using irq 40 for pin 1
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.882343] pci 0000:00:12.0: using irq 41 for pin 1
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.887875] clocksource: Switched to clocksource MIPS
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.893814] NET: Registered protocol family 2
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.898900] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.905868] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.912265] TCP: Hash tables configured (established 1024 bind 1024)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.918713] UDP hash table entries: 256 (order: 0, 4096 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.924547] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.931007] NET: Registered protocol family 1
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    2.935395] PCI: CLS 0 bytes, default 32
Wed Nov 25 20:07:48 2020 kern.warn kernel: [    2.939311] Crashlog allocated RAM at address 0x3f00000
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.945440] workingset: timestamp_bits=30 max_order=14 bucket_order=0
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.957454] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.963308] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.980267] io scheduler noop registered
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.984184] io scheduler deadline registered (default)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.989683] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Wed Nov 25 20:07:48 2020 kern.info kernel: [    2.996360] console [ttyS0] disabled
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.019993] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 10625000) is a 16550A
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.028704] console [ttyS0] enabled
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.035658] bootconsole [early0] disabled
Wed Nov 25 20:07:48 2020 kern.warn kernel: [    3.046501] m25p80 spi0.0: found s25sl064a, expected m25p80
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.052128] m25p80 spi0.0: s25sl064a (8192 Kbytes)
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    3.056947] 6 cmdlinepart partitions found on MTD device spi0.0
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    3.062860] Creating 6 MTD partitions on "spi0.0":
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    3.067646] 0x000000000000-0x000000040000 : "uboot"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    3.074513] 0x000000040000-0x000000050000 : "config"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    3.081227] 0x000000050000-0x000000660000 : "firmware"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    3.096621] 2 uimage-fw partitions found on MTD device firmware
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    3.102563] 0x000000050000-0x0000001aad94 : "kernel"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    3.108875] 0x0000001aad94-0x000000660000 : "rootfs"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    3.115190] mtd: device 4 (rootfs) set to be root filesystem
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    3.120942] 1 squashfs-split partitions found on MTD device rootfs
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    3.127113] 0x000000520000-0x000000660000 : "rootfs_data"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    3.134278] 0x000000660000-0x000000670000 : "caldata"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    3.141082] 0x000000670000-0x000000800000 : "unknown"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    3.147811] 0x0000007f0000-0x000000800000 : "caldata_copy"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    3.155354] Realtek RTL8366S ethernet switch driver version 0.2.2
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.161527] rtl8366s rtl8366s: using GPIO pins 5 (SDA) and 7 (SCK)
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.167799] rtl8366s rtl8366s: RTL8366 ver. 1 chip found
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.197948] rtl8366s rtl8366s: applying initvals
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.234215] libphy: rtl8366s: probed
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.238418] libphy: Fixed MDIO Bus: probed
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.266766] libphy: ag71xx_mdio: probed
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.609552] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.949841] ag71xx ag71xx.1: connected to PHY at rtl8366s:04 [uid=001cc960, driver=Generic PHY]
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.959155] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:RGMII
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.966707] NET: Registered protocol family 10
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.974292] NET: Registered protocol family 17
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.978836] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Wed Nov 25 20:07:48 2020 kern.info kernel: [    3.991853] 8021q: 802.1Q VLAN Support v1.8
Wed Nov 25 20:07:48 2020 kern.info kernel: [    4.002383] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Wed Nov 25 20:07:48 2020 kern.info kernel: [    4.010450] Freeing unused kernel memory: 324K
Wed Nov 25 20:07:48 2020 kern.warn kernel: [    4.014885] This architecture does not have kernel memory protection.
Wed Nov 25 20:07:48 2020 user.info kernel: [    4.655904] init: Console is alive
Wed Nov 25 20:07:48 2020 user.info kernel: [    4.659568] init: - watchdog -
Wed Nov 25 20:07:48 2020 user.info kernel: [    6.093034] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.234799] usbcore: registered new interface driver usbfs
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.240410] usbcore: registered new interface driver hub
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.245784] usbcore: registered new device driver usb
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.255616] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    6.269671] SCSI subsystem initialized
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.277953] ehci-platform: EHCI generic platform driver
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.283253] ehci-platform ehci-platform: EHCI Host Controller
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.289047] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.297056] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.327917] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.334976] hub 1-0:1.0: USB hub found
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.339050] hub 1-0:1.0: 2 ports detected
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.345849] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.353407] ohci-platform: OHCI generic platform driver
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.358770] ohci-platform ohci-platform: Generic Platform OHCI controller
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.365562] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.373547] ohci-platform ohci-platform: irq 14, io mem 0x1c000000
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.452694] hub 2-0:1.0: USB hub found
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.456710] hub 2-0:1.0: 2 ports detected
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.472873] usbcore: registered new interface driver usb-storage
Wed Nov 25 20:07:48 2020 kern.info kernel: [    6.481105] usbcore: registered new interface driver uas
Wed Nov 25 20:07:48 2020 user.info kernel: [    6.487003] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Wed Nov 25 20:07:48 2020 user.info kernel: [    6.504655] init: - preinit -
Wed Nov 25 20:07:48 2020 kern.info kernel: [    7.010567] usb 1-1: new high-speed USB device number 2 using ehci-platform
Wed Nov 25 20:07:48 2020 kern.debug kernel: [    7.336522] ar71xx: pll_reg 0xb8050010: 0x11110000
Wed Nov 25 20:07:48 2020 kern.info kernel: [    7.336540] eth0: link up (1000Mbps/Full duplex)
Wed Nov 25 20:07:48 2020 kern.notice kernel: [    7.359431] random: procd: uninitialized urandom read (4 bytes read)
Wed Nov 25 20:07:48 2020 kern.notice kernel: [   10.586566] jffs2: notice: (489) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Wed Nov 25 20:07:48 2020 user.info kernel: [   10.604748] mount_root: switching to jffs2 overlay
Wed Nov 25 20:07:48 2020 user.warn kernel: [   10.686594] urandom-seed: Seeding with /etc/urandom.seed
Wed Nov 25 20:07:48 2020 kern.info kernel: [   10.769924] eth0: link down
Wed Nov 25 20:07:48 2020 user.info kernel: [   10.783886] procd: - early -
Wed Nov 25 20:07:48 2020 user.info kernel: [   10.786846] procd: - watchdog -
Wed Nov 25 20:07:48 2020 kern.notice kernel: [   11.315266] random: jshn: uninitialized urandom read (4 bytes read)
Wed Nov 25 20:07:48 2020 user.info kernel: [   11.438956] procd: - watchdog -
Wed Nov 25 20:07:48 2020 user.info kernel: [   11.442328] procd: - ubus -
Wed Nov 25 20:07:48 2020 kern.notice kernel: [   11.660701] random: jshn: uninitialized urandom read (4 bytes read)
Wed Nov 25 20:07:48 2020 kern.notice kernel: [   11.675817] random: ubusd: uninitialized urandom read (4 bytes read)
Wed Nov 25 20:07:48 2020 user.info kernel: [   11.685210] procd: - init -
Wed Nov 25 20:07:48 2020 user.info kernel: [   12.480700] kmodloader: loading kernel modules from /etc/modules.d/*
Wed Nov 25 20:07:48 2020 kern.info kernel: [   12.568272] tun: Universal TUN/TAP device driver, 1.6
Wed Nov 25 20:07:48 2020 kern.info kernel: [   12.573319] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Wed Nov 25 20:07:48 2020 kern.info kernel: [   12.583873] gre: GRE over IPv4 demultiplexor driver
Wed Nov 25 20:07:48 2020 kern.info kernel: [   12.590785] ip_gre: GRE over IPv4 tunneling driver
Wed Nov 25 20:07:48 2020 kern.info kernel: [   12.611991] ip6_tables: (C) 2000-2006 Netfilter Core Team
Wed Nov 25 20:07:48 2020 kern.info kernel: [   12.822979] Linux video capture interface: v2.00
Wed Nov 25 20:07:48 2020 kern.info kernel: [   12.926908] u32 classifier
Wed Nov 25 20:07:48 2020 kern.info kernel: [   12.929671]     input device check on
Wed Nov 25 20:07:48 2020 kern.info kernel: [   12.933324]     Actions configured
Wed Nov 25 20:07:48 2020 kern.info kernel: [   12.953012] Mirror/redirect action on
Wed Nov 25 20:07:48 2020 kern.notice kernel: [   13.003332] Bridge firewalling registered
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.013943] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.021984] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.105264] Ebtables v2.0 registered
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.146031] ip_tables: (C) 2000-2006 Netfilter Core Team
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.167253] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.348683] Netfilter messages via NETLINK v0.30.
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.416839] xt_time: kernel timezone is -0000
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.499367] ctnetlink v0.93: registering with nfnetlink.
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.516389] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.562974] PPP generic driver version 2.4.2
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.570563] PPP MPPE Compression module registered
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.577360] NET: Registered protocol family 24
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.583736] PPTP driver version 0.8.5
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.632975] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam HD-6000 for Notebooks (045e:076f)
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.647400] input: Microsoft® LifeCam HD-6000 for as /devices/platform/ehci-platform/usb1/1-1/1-1:1.0/input/input0
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.658019] usbcore: registered new interface driver uvcvideo
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.663749] USB Video Class driver (1.1.1)
Wed Nov 25 20:07:48 2020 kern.warn kernel: [   13.721396] PCI: Enabling device 0000:00:11.0 (0000 -> 0002)
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.732268] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
Wed Nov 25 20:07:48 2020 kern.debug kernel: [   13.741036] ath: EEPROM regdomain: 0x0
Wed Nov 25 20:07:48 2020 kern.debug kernel: [   13.741041] ath: EEPROM indicates default country code should be used
Wed Nov 25 20:07:48 2020 kern.debug kernel: [   13.741043] ath: doing EEPROM country->regdmn map search
Wed Nov 25 20:07:48 2020 kern.debug kernel: [   13.741054] ath: country maps to regdmn code: 0x3a
Wed Nov 25 20:07:48 2020 kern.debug kernel: [   13.741059] ath: Country alpha2 being used: US
Wed Nov 25 20:07:48 2020 kern.debug kernel: [   13.741062] ath: Regpair used: 0x3a
Wed Nov 25 20:07:48 2020 kern.debug kernel: [   13.754858] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.758137] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
Wed Nov 25 20:07:48 2020 kern.warn kernel: [   13.843514] PCI: Enabling device 0000:00:12.0 (0000 -> 0002)
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.854433] ath: phy1: Ignoring endianness difference in EEPROM magic bytes.
Wed Nov 25 20:07:48 2020 kern.debug kernel: [   13.863217] ath: EEPROM regdomain: 0x0
Wed Nov 25 20:07:48 2020 kern.debug kernel: [   13.863221] ath: EEPROM indicates default country code should be used
Wed Nov 25 20:07:48 2020 kern.debug kernel: [   13.863224] ath: doing EEPROM country->regdmn map search
Wed Nov 25 20:07:48 2020 kern.debug kernel: [   13.863235] ath: country maps to regdmn code: 0x3a
Wed Nov 25 20:07:48 2020 kern.debug kernel: [   13.863240] ath: Country alpha2 being used: US
Wed Nov 25 20:07:48 2020 kern.debug kernel: [   13.863243] ath: Regpair used: 0x3a
Wed Nov 25 20:07:48 2020 kern.debug kernel: [   13.879380] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Wed Nov 25 20:07:48 2020 kern.info kernel: [   13.882526] ieee80211 phy1: Atheros AR9280 Rev:2 mem=0xb0010000, irq=41
Wed Nov 25 20:07:48 2020 user.info kernel: [   13.914154] kmodloader: done loading kernel modules from /etc/modules.d/*
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .bit
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .glue
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .parody
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .dyn
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .bbs
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .free
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .fur
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .geek
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .gopher
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .indy
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .ing
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .null
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .oss
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .micro
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: started, version 2.80 cachesize 150
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: DNS service limited to local subnets
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using local addresses only for domain test
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using local addresses only for domain onion
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using local addresses only for domain localhost
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using local addresses only for domain local
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using local addresses only for domain invalid
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using local addresses only for domain bind
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain micro
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain micro
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain micro
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain oss
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain oss
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain oss
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain null
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain null
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain null
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain ing
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain ing
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain ing
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain indy
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain indy
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain indy
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain gopher
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain gopher
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain gopher
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain geek
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain geek
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain geek
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain fur
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain fur
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain fur
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain free
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain free
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain free
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain bbs
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain bbs
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain bbs
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using 12 more nameservers
Wed Nov 25 20:07:49 2020 daemon.warn dnsmasq[1168]: no servers found in /tmp/resolv.conf.auto, will retry
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: read /etc/hosts - 5 addresses
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Wed Nov 25 20:07:50 2020 authpriv.info dropbear[1195]: Not backgrounding
Wed Nov 25 20:07:52 2020 kern.info kernel: [   19.337941] rtl8366s rtl8366s: applying initvals
Wed Nov 25 20:07:52 2020 user.notice : Added device handler type: tunnel
Wed Nov 25 20:07:52 2020 user.notice : Added device handler type: Network device
Wed Nov 25 20:07:52 2020 user.notice : Added device handler type: bridge
Wed Nov 25 20:07:52 2020 user.notice : Added device handler type: veth
Wed Nov 25 20:07:52 2020 user.notice : Added device handler type: macvlan
Wed Nov 25 20:07:52 2020 user.notice : Added device handler type: 8021ad
Wed Nov 25 20:07:52 2020 user.notice : Added device handler type: 8021q
Wed Nov 25 20:07:54 2020 kern.debug kernel: [   22.038778] ar71xx: pll_reg 0xb8050010: 0x11110000

.

14 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,993

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

Pokaż

uci show mjpg-streamer
ls /dev/video*

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

15 Odpowiedź przez jarek7714

  • Zarejestrowany: 2012-01-13
  • Posty: 1,519

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

 root@Gargoyle:~# uci show mjpg-streamer
mjpg-streamer.core=mjpg-streamer
mjpg-streamer.core.input='uvc'
mjpg-streamer.core.output='http'
mjpg-streamer.core.device='/dev/video0'
mjpg-streamer.core.resolution='640x480'
mjpg-streamer.core.yuv='0'
mjpg-streamer.core.quality='80'
mjpg-streamer.core.fps='5'
mjpg-streamer.core.led='auto'
mjpg-streamer.core.www='/www/webcam'
mjpg-streamer.core.port='8080'
mjpg-streamer.core.username='openwrt'
mjpg-streamer.core.password='openwrt'
mjpg-streamer.core.enabled='1'
root@Gargoyle:~# ls /dev/video*
/dev/video0
root@Gargoyle:~#

.

16 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,993

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

Wejdź przeglądarką na http://192.168.1.1:8080 czy jakie tam masz ip routera.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

17 Odpowiedź przez jarek7714

  • Zarejestrowany: 2012-01-13
  • Posty: 1,519

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

IP mam ustawione na 192.168.22.1 (ale wcześniej zmieniałem także na 192.168.1.1 i też nie działał), próbuję wejść na 192.168.22.1:8080 ale nie otwiera się strona (nie świeci też dioda przy kamerze, jedynie port USB w routerze led wyświetla jako aktywny).

18 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,993

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

ps | grep mjpg

pokaż. Jeżeli nic nie ma zrób

/etc/init.d/mjpg-streamer start

i pokaż co wypisał na konsoli.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

19 Odpowiedź przez jarek7714

  • Zarejestrowany: 2012-01-13
  • Posty: 1,519

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

Jest coś takiego 

 root@Gargoyle:~# ps | grep mjpg
 2767 root      1208 S    grep mjpg

20 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,993

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

W ogóle nie jest uruchomiony. Uruchom.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

21 Odpowiedź przez jarek7714

  • Zarejestrowany: 2012-01-13
  • Posty: 1,519

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

I właśnie z tym uruchomieniem jest problem 

 /etc/init.d/mjpg-streamer start

- nie działa.

22 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,993

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

Ale co wypisuje? Jeżeli nic to ponownie zrób ps | grep mjpg i zobacz czy faktycznie nie jest uruchomiony.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

23 Odpowiedź przez jarek7714

  • Zarejestrowany: 2012-01-13
  • Posty: 1,519

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

 root@Gargoyle:~# ps | grep mjpg
 2767 root      1208 S    grep mjpg
root@Gargoyle:~# /etc/init.d/mjpg-streamer start
root@Gargoyle:~# ps | grep mjpg
 2790 root      1208 S    grep mjpg

24 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,993

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

Zrób samo

/usr/bin/mjpg_streamer

i pokaż co wypisał

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

25 Odpowiedź przez jarek7714

  • Zarejestrowany: 2012-01-13
  • Posty: 1,519

Odp: Instalacja mjpg-streamer Gargoyle 1.12.0

 root@Gargoyle:~# /usr/bin/mjpg_streamer
MJPG Streamer Version.: 2.0
 o: www-folder-path...: disabled
 o: HTTP TCP port.....: 8080
 o: username:password.: disabled
 o: commands..........: enabled