Dzięki wielkie Cezary, jesteś niezastąpiony 
Skrypt dodany, pozostaje obserwacja
Strony 1
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
Opcje wyszukiwania
eko.one.pl → Posty przez bass
Znalezione posty: 24
1 2015-12-31 11:38:39
Odp: Zawieszanie się modemu Chaos Calmer 15.05 (2 odpowiedzi, napisanych Oprogramowanie / Software)
2 2015-12-30 12:32:54
Temat: Zawieszanie się modemu Chaos Calmer 15.05 (2 odpowiedzi, napisanych Oprogramowanie / Software)
Witam,
System OpenWrt Chaos Calmer 15.05 (r47662)
TP-Link TL-WR842N/ND v2
modem E3372^M podłączony przez aktywny hub
Dość nieregularnie wiesza się modem (led świeci na modemie) połączenie muli lub w ogóle nie ma. Po komendzie ifup wszystko wraca do normy. Poproszę o podpowiedzi co mogę zrobić.
Wed Dec 30 12:15:12 2015 daemon.info hostapd: wlan0: STA 68:17:29:12:5b:7e WPA: group key handshake completed (RSN)
Wed Dec 30 12:15:12 2015 daemon.info hostapd: wlan0: STA 30:0d:43:a1:6e:7c WPA: group key handshake completed (RSN)
Wed Dec 30 12:17:23 2015 authpriv.info dropbear[4528]: Exit (root): Exited normally
Wed Dec 30 12:21:24 2015 authpriv.info dropbear[5300]: Child connection from 192.168.1.186:60315
Wed Dec 30 12:21:33 2015 authpriv.notice dropbear[5300]: Password auth succeeded for 'root' from 192.168.1.186:60315
Wed Dec 30 12:21:40 2015 daemon.info pppd[5152]: Terminating on signal 15
Wed Dec 30 12:21:40 2015 daemon.info pppd[5152]: Connect time 15.2 minutes.
Wed Dec 30 12:21:40 2015 daemon.info pppd[5152]: Sent 2163497 bytes, received 8763801 bytes.
Wed Dec 30 12:21:40 2015 daemon.notice netifd: Network device '3g-modem' link is down
Wed Dec 30 12:21:40 2015 daemon.notice netifd: Network alias '3g-modem' link is down
Wed Dec 30 12:21:40 2015 daemon.notice netifd: Interface 'modem_6' has link connectivity loss
Wed Dec 30 12:21:40 2015 daemon.notice pppd[5152]: Connection terminated.
Wed Dec 30 12:21:40 2015 daemon.info pppd[5152]: Exit.
Wed Dec 30 12:21:40 2015 daemon.notice netifd: Interface 'modem' is now down
Wed Dec 30 12:21:40 2015 daemon.notice netifd: Interface 'modem' is setting up now
Wed Dec 30 12:21:41 2015 daemon.warn dnsmasq[2011]: no servers found in /tmp/resolv.conf.auto, will retry
Wed Dec 30 12:21:41 2015 daemon.notice netifd: modem (5411): comgt 12:21:41 -> -- Error Report --
Wed Dec 30 12:21:41 2015 daemon.notice netifd: modem (5411): comgt 12:21:41 -> ----> ^
Wed Dec 30 12:21:41 2015 daemon.notice netifd: modem (5411): comgt 12:21:41 -> Error @25, line 2, Can't ioctl set device. (1)
Wed Dec 30 12:21:41 2015 daemon.notice netifd: modem (5411):
Wed Dec 30 12:21:41 2015 daemon.notice netifd: Interface 'modem_6' is now down
Wed Dec 30 12:21:41 2015 daemon.notice netifd: Interface 'modem_6' is disabled
Wed Dec 30 12:21:41 2015 daemon.notice pppd[5458]: pppd 2.4.7 started by root, uid 0
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: abort on (BUSY)
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: abort on (NO CARRIER)
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: abort on (ERROR)
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: report (CONNECT)
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: timeout set to 10 seconds
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: send (AT&F^M)
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: expect (OK)
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: AT&F^M^M
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: OK
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: -- got it
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: send (ATE1^M)
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: expect (OK)
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: ^M
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: ATE1^M^M
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: OK
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: -- got it
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: send (AT+CGDCONT=1,"IP","internet"^M)
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: timeout set to 30 seconds
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: expect (OK)
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: ^M
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: AT+CGDCONT=1,"IP","internet"^M^M
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: OK
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: -- got it
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: send (ATD*99***1#^M)
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: expect (CONNECT)
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: ^M
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: ATD*99***1#^M^M
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: CONNECT
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: -- got it
Wed Dec 30 12:21:43 2015 local2.info chat[5460]: send ( ^M)
Wed Dec 30 12:21:43 2015 daemon.info pppd[5458]: Serial connection established.
Wed Dec 30 12:21:43 2015 kern.info kernel: [60427.110000] 3g-modem: renamed from ppp0
Wed Dec 30 12:21:44 2015 daemon.info pppd[5458]: Using interface 3g-modem
Wed Dec 30 12:21:44 2015 daemon.notice pppd[5458]: Connect: 3g-modem <--> /dev/ttyUSB1
Wed Dec 30 12:21:46 2015 daemon.warn pppd[5458]: Could not determine remote IP address: defaulting to 10.64.64.64
Wed Dec 30 12:21:46 2015 daemon.notice pppd[5458]: local IP address 100.93.251.20
Wed Dec 30 12:21:46 2015 daemon.notice pppd[5458]: remote IP address 10.64.64.64
Wed Dec 30 12:21:46 2015 daemon.notice pppd[5458]: primary DNS address 213.158.199.1
Wed Dec 30 12:21:46 2015 daemon.notice pppd[5458]: secondary DNS address 213.158.199.5
Wed Dec 30 12:21:47 2015 daemon.notice netifd: Network device '3g-modem' link is up
Wed Dec 30 12:21:47 2015 daemon.notice netifd: Interface 'modem' is now up
Wed Dec 30 12:21:47 2015 daemon.info dnsmasq[2011]: reading /tmp/resolv.conf.auto
Wed Dec 30 12:21:47 2015 daemon.info dnsmasq[2011]: using local addresses only for domain lan
Wed Dec 30 12:21:47 2015 daemon.info dnsmasq[2011]: using nameserver 213.158.199.1#53
Wed Dec 30 12:21:47 2015 daemon.info dnsmasq[2011]: using nameserver 213.158.199.5#53
Wed Dec 30 12:21:47 2015 daemon.notice netifd: Network alias '3g-modem' link is up
Wed Dec 30 12:21:47 2015 daemon.notice netifd: Interface 'modem_6' is enabled
Wed Dec 30 12:21:47 2015 daemon.notice netifd: Interface 'modem_6' has link connectivity
Wed Dec 30 12:21:47 2015 daemon.notice netifd: Interface 'modem_6' is setting up now
Wed Dec 30 12:21:48 2015 user.notice firewall: Reloading firewall due to ifup of modem (3g-modem)3 2015-04-30 07:33:54
Odp: Problem z drukarką Barrier Breaker (7 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
Modem Ci zawisł. Wyjmij go i podłącz jeszcze raz.
Próbowałem. Niestety restarty i podłaczanie na nowo nic nie daje.
4 2015-04-29 07:30:26
Odp: Problem z drukarką Barrier Breaker (7 odpowiedzi, napisanych Oprogramowanie / Software)
Będę próbował CUPS'a. Z tym że wczoraj wyskoczył problem taki, że modem przestał się logować do sieci.
Poproszę o spojrzenie co nie tak jest. O co chodzi z tym option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:02:08 2015 daemon.info xl2tpd[1620]: Listening on IP address 0.0.0.0, port 1701
Fri Apr 24 11:02:09 2015 kern.info kernel: [ 35.310000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Fri Apr 24 11:02:09 2015 kern.info kernel: [ 35.350000] device wlan0 entered promiscuous mode
Fri Apr 24 11:02:09 2015 kern.info kernel: [ 35.350000] br-lan: port 2(wlan0) entered forwarding state
Fri Apr 24 11:02:09 2015 kern.info kernel: [ 35.360000] br-lan: port 2(wlan0) entered forwarding state
Fri Apr 24 11:02:09 2015 kern.info kernel: [ 35.530000] br-lan: port 2(wlan0) entered disabled state
Fri Apr 24 11:02:10 2015 user.emerg syslog: setting up led WAN
Fri Apr 24 11:02:10 2015 user.emerg syslog: setting up led LAN1
Fri Apr 24 11:02:10 2015 user.emerg syslog: setting up led LAN2
Fri Apr 24 11:02:10 2015 user.emerg syslog: setting up led LAN3
Fri Apr 24 11:02:10 2015 user.emerg syslog: setting up led LAN4
Fri Apr 24 11:02:10 2015 user.emerg syslog: setting up led WLAN
Fri Apr 24 11:02:10 2015 user.emerg syslog: setting up led USB
Fri Apr 24 11:02:10 2015 kern.info kernel: [ 36.340000] br-lan: port 2(wlan0) entered forwarding state
Fri Apr 24 11:02:10 2015 kern.info kernel: [ 36.340000] br-lan: port 2(wlan0) entered forwarding state
Fri Apr 24 11:02:10 2015 kern.info kernel: [ 36.350000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Fri Apr 24 11:02:11 2015 daemon.notice netifd: Network device 'wlan0' link is up
Fri Apr 24 11:02:11 2015 user.emerg syslog: - init complete -
Fri Apr 24 11:02:12 2015 kern.info kernel: [ 38.340000] br-lan: port 2(wlan0) entered forwarding state
Fri Apr 24 11:02:14 2015 daemon.info dnsmasq[1758]: started, version 2.71 cachesize 150
Fri Apr 24 11:02:14 2015 daemon.info dnsmasq[1758]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Fri Apr 24 11:02:14 2015 daemon.info dnsmasq-dhcp[1758]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Fri Apr 24 11:02:14 2015 daemon.info dnsmasq[1758]: using local addresses only for domain lan
Fri Apr 24 11:02:14 2015 daemon.warn dnsmasq[1758]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Apr 24 11:02:14 2015 daemon.info dnsmasq[1758]: read /etc/hosts - 1 addresses
Fri Apr 24 11:02:14 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/dhcp - 1 addresses
Fri Apr 24 11:02:14 2015 daemon.info dnsmasq-dhcp[1758]: read /etc/ethers - 0 addresses
Fri Apr 24 11:02:15 2015 user.notice upnp daemon: external interface not found, not starting
Fri Apr 24 11:02:41 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: authenticated
Fri Apr 24 11:02:41 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: associated (aid 1)
Fri Apr 24 11:02:41 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df WPA: pairwise key handshake completed (RSN)
Fri Apr 24 11:02:41 2015 daemon.info dnsmasq-dhcp[1758]: DHCPREQUEST(br-lan) 192.168.1.115 a4:17:31:19:3d:df
Fri Apr 24 11:02:41 2015 daemon.info dnsmasq-dhcp[1758]: DHCPACK(br-lan) 192.168.1.115 a4:17:31:19:3d:df laptop-agi
Fri Apr 24 11:02:41 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: disassociated
Fri Apr 24 11:02:42 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Fri Apr 24 11:02:43 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: authenticated
Fri Apr 24 11:02:43 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: associated (aid 1)
Fri Apr 24 11:02:43 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df WPA: pairwise key handshake completed (RSN)
Fri Apr 24 11:02:43 2015 daemon.info dnsmasq-dhcp[1758]: DHCPREQUEST(br-lan) 192.168.1.115 a4:17:31:19:3d:df
Fri Apr 24 11:02:43 2015 daemon.info dnsmasq-dhcp[1758]: DHCPACK(br-lan) 192.168.1.115 a4:17:31:19:3d:df laptop-agi
Fri Apr 24 11:02:44 2015 daemon.warn odhcpd[1173]: DHCPV6 CONFIRM IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: not on-link
Fri Apr 24 11:02:44 2015 daemon.info dnsmasq[1758]: read /etc/hosts - 1 addresses
Fri Apr 24 11:02:44 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/odhcpd - 0 addresses
Fri Apr 24 11:02:44 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/dhcp - 1 addresses
Fri Apr 24 11:02:44 2015 daemon.info dnsmasq-dhcp[1758]: read /etc/ethers - 0 addresses
Fri Apr 24 11:02:45 2015 daemon.warn odhcpd[1173]: DHCPV6 CONFIRM IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: not on-link
Fri Apr 24 11:02:45 2015 daemon.warn odhcpd[1173]: DHCPV6 SOLICIT IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: ok fd53:a2bb:741c::637/128
Fri Apr 24 11:02:46 2015 daemon.warn odhcpd[1173]: DHCPV6 REQUEST IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: ok fd53:a2bb:741c::637/128
Fri Apr 24 11:02:46 2015 daemon.info dnsmasq[1758]: read /etc/hosts - 1 addresses
Fri Apr 24 11:02:46 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/odhcpd - 1 addresses
Fri Apr 24 11:02:46 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/dhcp - 1 addresses
Fri Apr 24 11:02:46 2015 daemon.info dnsmasq-dhcp[1758]: read /etc/ethers - 0 addresses
Fri Apr 24 11:03:20 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: authenticated
Fri Apr 24 11:03:20 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: associated (aid 1)
Fri Apr 24 11:03:20 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df WPA: pairwise key handshake completed (RSN)
Fri Apr 24 11:03:20 2015 daemon.info dnsmasq-dhcp[1758]: DHCPREQUEST(br-lan) 192.168.1.115 a4:17:31:19:3d:df
Fri Apr 24 11:03:20 2015 daemon.info dnsmasq-dhcp[1758]: DHCPACK(br-lan) 192.168.1.115 a4:17:31:19:3d:df laptop-agi
Fri Apr 24 11:03:21 2015 daemon.warn odhcpd[1173]: DHCPV6 CONFIRM IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: not on-link fd53:a2bb:741c::637/128
Fri Apr 24 11:03:21 2015 daemon.warn odhcpd[1173]: DHCPV6 SOLICIT IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: ok fd53:a2bb:741c::637/128
Fri Apr 24 11:03:21 2015 daemon.info dnsmasq[1758]: read /etc/hosts - 1 addresses
Fri Apr 24 11:03:21 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/odhcpd - 0 addresses
Fri Apr 24 11:03:21 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/dhcp - 1 addresses
Fri Apr 24 11:03:21 2015 daemon.info dnsmasq-dhcp[1758]: read /etc/ethers - 0 addresses
Fri Apr 24 11:03:22 2015 daemon.warn odhcpd[1173]: DHCPV6 REQUEST IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: ok fd53:a2bb:741c::637/128
Fri Apr 24 11:03:22 2015 daemon.info dnsmasq[1758]: read /etc/hosts - 1 addresses
Fri Apr 24 11:03:22 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/odhcpd - 1 addresses
Fri Apr 24 11:03:22 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/dhcp - 1 addresses
Fri Apr 24 11:03:22 2015 daemon.info dnsmasq-dhcp[1758]: read /etc/ethers - 0 addresses
Fri Apr 24 11:03:40 2015 kern.info kernel: [ 125.850000] usb 1-1.4: new high-speed USB device number 3 using ehci-platform
Fri Apr 24 11:03:40 2015 kern.info kernel: [ 125.970000] usb-storage 1-1.4:1.0: USB Mass Storage device detected
Fri Apr 24 11:03:40 2015 kern.info kernel: [ 125.970000] scsi0 : usb-storage 1-1.4:1.0
Fri Apr 24 11:03:40 2015 kern.info kernel: [ 126.380000] usb 1-1.4: USB disconnect, device number 3
Fri Apr 24 11:03:41 2015 kern.info kernel: [ 126.870000] usb 1-1.4: new high-speed USB device number 4 using ehci-platform
Fri Apr 24 11:03:41 2015 kern.info kernel: [ 126.990000] option 1-1.4:1.0: GSM modem (1-port) converter detected
Fri Apr 24 11:03:41 2015 kern.info kernel: [ 127.000000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
Fri Apr 24 11:03:41 2015 kern.info kernel: [ 127.000000] option 1-1.4:1.1: GSM modem (1-port) converter detected
Fri Apr 24 11:03:41 2015 kern.info kernel: [ 127.020000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
Fri Apr 24 11:03:41 2015 kern.info kernel: [ 127.030000] usb 1-1.4: MAC-Address: 00:1e:10:1f:00:00
Fri Apr 24 11:03:41 2015 kern.info kernel: [ 127.050000] huawei_cdc_ncm 1-1.4:1.2: cdc-wdm0: USB WDM device
Fri Apr 24 11:03:41 2015 kern.info kernel: [ 127.050000] huawei_cdc_ncm 1-1.4:1.2 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform-1.4, Huawei CDC NCM device, 00:1e:10:1f:00:00
Fri Apr 24 11:03:41 2015 kern.info kernel: [ 127.070000] usb-storage 1-1.4:1.3: USB Mass Storage device detected
Fri Apr 24 11:03:41 2015 kern.info kernel: [ 127.090000] scsi1 : usb-storage 1-1.4:1.3
Fri Apr 24 11:03:41 2015 kern.info kernel: [ 127.090000] usb-storage 1-1.4:1.4: USB Mass Storage device detected
Fri Apr 24 11:03:41 2015 kern.info kernel: [ 127.110000] scsi2 : usb-storage 1-1.4:1.4
Fri Apr 24 11:03:42 2015 daemon.notice netifd: Interface 'tmobile' is setting up now
Fri Apr 24 11:03:42 2015 kern.notice kernel: [ 128.090000] scsi 1:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
Fri Apr 24 11:03:42 2015 kern.notice kernel: [ 128.110000] scsi 2:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
Fri Apr 24 11:03:42 2015 kern.notice kernel: [ 128.150000] sd 2:0:0:0: [sda] Attached SCSI removable disk
Fri Apr 24 11:03:43 2015 user.err syslog: Unkown action change
Fri Apr 24 11:03:43 2015 user.err syslog: Unkown action change
Fri Apr 24 11:03:44 2015 kern.err kernel: [ 130.070000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:44 2015 daemon.notice netifd: tmobile (2049): Trying to set mode
Fri Apr 24 11:03:45 2015 daemon.notice netifd: tmobile (2049): comgt 11:03:45 -> -- Error Report --
Fri Apr 24 11:03:45 2015 daemon.notice netifd: tmobile (2049): comgt 11:03:45 -> ----> ^
Fri Apr 24 11:03:45 2015 daemon.notice netifd: tmobile (2049): comgt 11:03:45 -> Error @163, line 10, Could not write to COM device. (1)
Fri Apr 24 11:03:45 2015 daemon.notice netifd: tmobile (2049):
Fri Apr 24 11:03:45 2015 kern.err kernel: [ 131.120000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:45 2015 daemon.notice pppd[2142]: pppd 2.4.7 started by root, uid 0
Fri Apr 24 11:03:46 2015 local2.info chat[2144]: abort on (BUSY)
Fri Apr 24 11:03:46 2015 local2.info chat[2144]: abort on (NO CARRIER)
Fri Apr 24 11:03:46 2015 local2.info chat[2144]: abort on (ERROR)
Fri Apr 24 11:03:46 2015 local2.info chat[2144]: report (CONNECT)
Fri Apr 24 11:03:46 2015 local2.info chat[2144]: timeout set to 10 seconds
Fri Apr 24 11:03:46 2015 local2.info chat[2144]: send (AT&F^M)
Fri Apr 24 11:03:46 2015 local2.info chat[2144]: expect (OK)
Fri Apr 24 11:03:47 2015 local2.info chat[2144]: AT&F^M^M
Fri Apr 24 11:03:47 2015 local2.info chat[2144]: +CME ERROR
Fri Apr 24 11:03:47 2015 local2.info chat[2144]: -- failed
Fri Apr 24 11:03:47 2015 local2.info chat[2144]: Failed (ERROR)
Fri Apr 24 11:03:47 2015 daemon.err pppd[2142]: Connect script failed
Fri Apr 24 11:03:48 2015 kern.err kernel: [ 133.840000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:48 2015 daemon.info pppd[2142]: Exit.
Fri Apr 24 11:03:48 2015 daemon.notice netifd: Interface 'tmobile' is now down
Fri Apr 24 11:03:48 2015 daemon.notice netifd: Interface 'tmobile' is setting up now
Fri Apr 24 11:03:49 2015 kern.err kernel: [ 135.550000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:50 2015 daemon.notice netifd: tmobile (2150): Trying to set mode
Fri Apr 24 11:03:50 2015 daemon.notice netifd: tmobile (2150): comgt 11:03:50 -> -- Error Report --
Fri Apr 24 11:03:50 2015 daemon.notice netifd: tmobile (2150): comgt 11:03:50 -> ----> ^
Fri Apr 24 11:03:50 2015 daemon.notice netifd: tmobile (2150): comgt 11:03:50 -> Error @163, line 10, Could not write to COM device. (1)
Fri Apr 24 11:03:50 2015 daemon.notice netifd: tmobile (2150):
Fri Apr 24 11:03:50 2015 kern.err kernel: [ 136.610000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:51 2015 daemon.notice pppd[2165]: pppd 2.4.7 started by root, uid 0
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: abort on (BUSY)
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: abort on (NO CARRIER)
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: abort on (ERROR)
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: report (CONNECT)
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: timeout set to 10 seconds
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: send (AT&F^M)
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: expect (OK)
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: AT&F^M^M
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: +CME ERROR
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: -- failed
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: Failed (ERROR)
Fri Apr 24 11:03:52 2015 daemon.err pppd[2165]: Connect script failed
Fri Apr 24 11:03:53 2015 kern.err kernel: [ 139.200000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:53 2015 daemon.info pppd[2165]: Exit.
Fri Apr 24 11:03:53 2015 daemon.notice netifd: Interface 'tmobile' is now down
Fri Apr 24 11:03:53 2015 daemon.notice netifd: Interface 'tmobile' is setting up now
Fri Apr 24 11:03:55 2015 kern.err kernel: [ 140.920000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:55 2015 daemon.notice netifd: tmobile (2173): Trying to set mode
Fri Apr 24 11:03:56 2015 daemon.notice netifd: tmobile (2173): comgt 11:03:56 -> -- Error Report --
Fri Apr 24 11:03:56 2015 daemon.notice netifd: tmobile (2173): comgt 11:03:56 -> ----> ^
Fri Apr 24 11:03:56 2015 daemon.notice netifd: tmobile (2173): comgt 11:03:56 -> Error @163, line 10, Could not write to COM device. (1)
Fri Apr 24 11:03:56 2015 daemon.notice netifd: tmobile (2173):
Fri Apr 24 11:03:56 2015 kern.err kernel: [ 141.930000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:56 2015 daemon.notice pppd[2191]: pppd 2.4.7 started by root, uid 0
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: abort on (BUSY)
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: abort on (NO CARRIER)
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: abort on (ERROR)
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: report (CONNECT)
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: timeout set to 10 seconds
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: send (AT&F^M)
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: expect (OK)
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: AT&F^M^M
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: +CME ERROR
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: -- failed
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: Failed (ERROR)
Fri Apr 24 11:03:57 2015 daemon.err pppd[2191]: Connect script failed
Fri Apr 24 11:03:58 2015 kern.err kernel: [ 144.520000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:58 2015 daemon.info pppd[2191]: Exit.
Fri Apr 24 11:03:58 2015 daemon.notice netifd: Interface 'tmobile' is now down
Fri Apr 24 11:03:58 2015 daemon.notice netifd: Interface 'tmobile' is setting up now
Fri Apr 24 11:04:00 2015 kern.err kernel: [ 146.240000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:04:01 2015 daemon.notice netifd: tmobile (2199): Trying to set mode
Fri Apr 24 11:04:01 2015 daemon.notice netifd: tmobile (2199): comgt 11:04:01 -> -- Error Report --
Fri Apr 24 11:04:01 2015 daemon.notice netifd: tmobile (2199): comgt 11:04:01 -> ----> ^
Fri Apr 24 11:04:01 2015 daemon.notice netifd: tmobile (2199): comgt 11:04:01 -> Error @163, line 10, Could not write to COM device. (1)
Fri Apr 24 11:04:01 2015 daemon.notice netifd: tmobile (2199):
Fri Apr 24 11:04:01 2015 kern.err kernel: [ 147.300000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:04:01 2015 daemon.notice pppd[2214]: pppd 2.4.7 started by root, uid 0
Fri Apr 24 11:04:02 2015 local2.info chat[2216]: abort on (BUSY)
Fri Apr 24 11:04:02 2015 local2.info chat[2216]: abort on (NO CARRIER)
Fri Apr 24 11:04:02 2015 local2.info chat[2216]: abort on (ERROR)
Fri Apr 24 11:04:02 2015 local2.info chat[2216]: report (CONNECT)
Fri Apr 24 11:04:02 2015 local2.info chat[2216]: timeout set to 10 seconds
Fri Apr 24 11:04:02 2015 local2.info chat[2216]: send (AT&F^M)
Fri Apr 24 11:04:02 2015 local2.info chat[2216]: expect (OK)
Fri Apr 24 11:04:03 2015 local2.info chat[2216]: AT&F^M^M
Fri Apr 24 11:04:03 2015 local2.info chat[2216]: +CME ERROR
Fri Apr 24 11:04:03 2015 local2.info chat[2216]: -- failed
Fri Apr 24 11:04:03 2015 local2.info chat[2216]: Failed (ERROR)
Fri Apr 24 11:04:03 2015 daemon.err pppd[2214]: Connect script failed
Fri Apr 24 11:04:04 2015 kern.err kernel: [ 149.890000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:04:04 2015 daemon.info pppd[2214]: Exit.
Fri Apr 24 11:04:04 2015 daemon.notice netifd: Interface 'tmobile' is now down
Fri Apr 24 11:04:04 2015 daemon.notice netifd: Interface 'tmobile' is setting up now
Fri Apr 24 11:04:05 2015 kern.err kernel: [ 151.610000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:04:06 2015 daemon.notice netifd: tmobile (2222): Trying to set mode
Fri Apr 24 11:04:06 2015 daemon.notice netifd: tmobile (2222): comgt 11:04:06 -> -- Error Report --
Fri Apr 24 11:04:06 2015 daemon.notice netifd: tmobile (2222): comgt 11:04:06 -> ----> ^
Fri Apr 24 11:04:06 2015 daemon.notice netifd: tmobile (2222): comgt 11:04:06 -> Error @163, line 10, Could not write to COM device. (1)
Fri Apr 24 11:04:06 2015 daemon.notice netifd: tmobile (2222):
Fri Apr 24 11:04:06 2015 kern.err kernel: [ 152.670000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:04:07 2015 daemon.notice pppd[2237]: pppd 2.4.7 started by root, uid 0
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: abort on (BUSY)
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: abort on (NO CARRIER)
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: abort on (ERROR)
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: report (CONNECT)
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: timeout set to 10 seconds
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: send (AT&F^M)
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: expect (OK)
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: AT&F^M^M
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: +CME ERROR
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: -- failed
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: Failed (ERROR)
Fri Apr 24 11:04:08 2015 daemon.err pppd[2237]: Connect script failed
Fri Apr 24 11:04:09 2015 kern.err kernel: [ 155.260000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:04:09 2015 daemon.info pppd[2237]: Exit.
Fri Apr 24 11:04:09 2015 daemon.notice netifd: Interface 'tmobile' is now down
Fri Apr 24 11:04:09 2015 daemon.notice netifd: Interface 'tmobile' is setting up now
Fri Apr 24 11:04:11 2015 kern.err kernel: [ 156.990000] option1 ttyUSB1: option_instat_callback: error -2[ 0.000000] Linux version 3.10.49 (cezary@eko.one.pl) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #9 Sat Mar 28 08:55:37 CET 2015
[ 0.000000] MyLoader: sysp=9926862e, boardp=5f2bfe0e, parts=75c0efe4
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0001974c (MIPS 74Kc)
[ 0.000000] SoC: Atheros AR9341 rev 3
[ 0.000000] Clocks: CPU:535.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 80338b60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: board=TL-WR842N-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 28588k/32768k available (2386k kernel code, 4180k reserved, 620k data, 256k init, 0k highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.070000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.100000] MIPS: machine is TP-LINK TL-WR842N/ND v2
[ 0.520000] bio: create slab <bio-0> at 0
[ 0.520000] Switching to clocksource MIPS
[ 0.530000] NET: Registered protocol family 2
[ 0.530000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.540000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.550000] TCP: Hash tables configured (established 512 bind 512)
[ 0.550000] TCP: reno registered
[ 0.560000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.560000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.570000] NET: Registered protocol family 1
[ 0.570000] PCI: CLS 0 bytes, default 32
[ 0.590000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.600000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.610000] msgmni has been set to 55
[ 0.610000] io scheduler noop registered
[ 0.610000] io scheduler deadline registered (default)
[ 0.620000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.650000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[ 0.660000] console [ttyS0] enabled, bootconsole disabled
[ 0.670000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[ 0.680000] m25p80 spi0.0: found s25fl064k, expected m25p80
[ 0.690000] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[ 0.690000] 5 tp-link partitions found on MTD device spi0.0
[ 0.700000] Creating 5 MTD partitions on "spi0.0":
[ 0.700000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.710000] 0x000000020000-0x0000001303d8 : "kernel"
[ 0.710000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.730000] 0x0000001303d8-0x0000007f0000 : "rootfs"
[ 0.730000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.750000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.760000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.760000] 0x000000670000-0x0000007f0000 : "rootfs_data"
[ 0.770000] 0x0000007f0000-0x000000800000 : "art"
[ 0.780000] 0x000000020000-0x0000007f0000 : "firmware"
[ 0.800000] libphy: ag71xx_mdio: probed
[ 1.350000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
[ 1.370000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 1.920000] ag71xx-mdio.1: Found an AR934X built-in switch
[ 2.960000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.970000] TCP: cubic registered
[ 2.970000] NET: Registered protocol family 17
[ 2.980000] Bridge firewalling registered
[ 2.980000] 8021q: 802.1Q VLAN Support v1.8
[ 2.990000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 3.000000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 3.010000] Freeing unused kernel memory: 256K (80350000 - 80390000)
[ 6.450000] usbcore: registered new interface driver usbfs
[ 6.460000] usbcore: registered new interface driver hub
[ 6.460000] usbcore: registered new device driver usb
[ 6.510000] SCSI subsystem initialized
[ 6.520000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.530000] ehci-platform: EHCI generic platform driver
[ 6.540000] ehci-platform ehci-platform: EHCI Host Controller
[ 6.540000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 6.550000] ehci-platform ehci-platform: TX-TX IDP fix enabled
[ 6.560000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 6.590000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 6.590000] hub 1-0:1.0: USB hub found
[ 6.600000] hub 1-0:1.0: 1 port detected
[ 6.600000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.620000] usbcore: registered new interface driver usb-storage
[ 7.040000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 7.400000] hub 1-1:1.0: USB hub found
[ 7.400000] hub 1-1:1.0: 4 ports detected
[ 9.130000] eth1: link up (1000Mbps/Full duplex)
[ 12.190000] jffs2: notice: (372) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 33 of xref (0 dead, 9 orphan) found.
[ 12.210000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 12.220000] block: unable to load configuration (fstab: Entry not found)
[ 12.230000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[ 12.240000] block: extroot: not configured
[ 12.290000] jffs2: notice: (369) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 33 of xref (0 dead, 9 orphan) found.
[ 12.510000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 12.530000] block: unable to load configuration (fstab: Entry not found)
[ 12.530000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[ 12.550000] block: extroot: not configured
[ 12.580000] eth1: link down
[ 16.870000] NET: Registered protocol family 10
[ 16.900000] l2tp_core: L2TP core driver, V2.0
[ 16.900000] l2tp_netlink: L2TP netlink interface
[ 16.920000] gre: GRE over IPv4 demultiplexor driver
[ 16.940000] ip_gre: GRE over IPv4 tunneling driver
[ 16.950000] nf_conntrack version 0.5.0 (450 buckets, 1800 max)
[ 16.970000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.000000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[ 17.000000] Backport generated by backports.git backports-20140320-37-g5c33da0
[ 17.090000] cfg80211: Calling CRDA to update world regulatory domain
[ 17.090000] cfg80211: World regulatory domain updated:
[ 17.100000] cfg80211: DFS Master region: unset
[ 17.100000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 17.110000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.120000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.130000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.140000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.150000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 17.150000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 17.160000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.170000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 17.350000] u32 classifier
[ 17.350000] input device check on
[ 17.360000] Actions configured
[ 17.360000] Mirror/redirect action on
[ 17.390000] fuse init (API version 7.22)
[ 17.450000] usbcore: registered new interface driver cdc_acm
[ 17.460000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 17.470000] usbcore: registered new interface driver cdc_wdm
[ 17.490000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.550000] usbcore: registered new interface driver usblp
[ 17.580000] usbcore: registered new interface driver usbserial
[ 17.610000] usbcore: registered new interface driver usbserial_generic
[ 17.610000] usbserial: USB Serial support registered for generic
[ 17.720000] xt_time: kernel timezone is -0000
[ 17.770000] usbcore: registered new interface driver cdc_ether
[ 17.790000] usbcore: registered new interface driver cdc_ncm
[ 17.790000] usbcore: registered new interface driver huawei_cdc_ncm
[ 17.830000] PPP generic driver version 2.4.2
[ 17.830000] PPP MPPE Compression module registered
[ 17.850000] NET: Registered protocol family 24
[ 17.850000] PPTP driver version 0.8.5
[ 17.870000] usbcore: registered new interface driver qmi_wwan
[ 17.890000] usbcore: registered new interface driver rndis_host
[ 17.900000] usbcore: registered new interface driver sierra
[ 17.910000] usbserial: USB Serial support registered for Sierra USB modem
[ 17.920000] usbcore: registered new interface driver sierra_net
[ 17.950000] ath: EEPROM regdomain: 0x0
[ 17.950000] ath: EEPROM indicates default country code should be used
[ 17.950000] ath: doing EEPROM country->regdmn map search
[ 17.950000] ath: country maps to regdmn code: 0x3a
[ 17.950000] ath: Country alpha2 being used: US
[ 17.950000] ath: Regpair used: 0x3a
[ 17.970000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 17.970000] cfg80211: Calling CRDA for country: US
[ 17.980000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
[ 17.990000] cfg80211: Regulatory domain changed to country: US
[ 17.990000] cfg80211: DFS Master region: FCC
[ 18.000000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 18.010000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 18.010000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[ 18.020000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 18.030000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 18.040000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 18.060000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 18.070000] usbcore: registered new interface driver option
[ 18.090000] usbserial: USB Serial support registered for GSM modem (1-port)
[ 31.320000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 31.320000] device eth1 entered promiscuous mode
[ 31.340000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 31.360000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.020000] eth1: link up (1000Mbps/Full duplex)
[ 32.020000] br-lan: port 1(eth1) entered forwarding state
[ 32.030000] br-lan: port 1(eth1) entered forwarding state
[ 32.030000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 32.060000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 32.600000] cfg80211: Calling CRDA for country: PL
[ 32.610000] cfg80211: Regulatory domain changed to country: PL
[ 32.620000] cfg80211: DFS Master region: ETSI
[ 32.620000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 32.630000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 32.640000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 32.650000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
[ 32.660000] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
[ 32.660000] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 34.030000] br-lan: port 1(eth1) entered forwarding state
[ 35.310000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.350000] device wlan0 entered promiscuous mode
[ 35.350000] br-lan: port 2(wlan0) entered forwarding state
[ 35.360000] br-lan: port 2(wlan0) entered forwarding state
[ 35.530000] br-lan: port 2(wlan0) entered disabled state
[ 36.340000] br-lan: port 2(wlan0) entered forwarding state
[ 36.340000] br-lan: port 2(wlan0) entered forwarding state
[ 36.350000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 38.340000] br-lan: port 2(wlan0) entered forwarding state
[ 125.850000] usb 1-1.4: new high-speed USB device number 3 using ehci-platform
[ 125.970000] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 125.970000] scsi0 : usb-storage 1-1.4:1.0
[ 126.380000] usb 1-1.4: USB disconnect, device number 3
[ 126.870000] usb 1-1.4: new high-speed USB device number 4 using ehci-platform
[ 126.990000] option 1-1.4:1.0: GSM modem (1-port) converter detected
[ 127.000000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
[ 127.000000] option 1-1.4:1.1: GSM modem (1-port) converter detected
[ 127.020000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
[ 127.030000] usb 1-1.4: MAC-Address: 00:1e:10:1f:00:00
[ 127.050000] huawei_cdc_ncm 1-1.4:1.2: cdc-wdm0: USB WDM device
[ 127.050000] huawei_cdc_ncm 1-1.4:1.2 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform-1.4, Huawei CDC NCM device, 00:1e:10:1f:00:00
[ 127.070000] usb-storage 1-1.4:1.3: USB Mass Storage device detected
[ 127.090000] scsi1 : usb-storage 1-1.4:1.3
[ 127.090000] usb-storage 1-1.4:1.4: USB Mass Storage device detected
[ 127.110000] scsi2 : usb-storage 1-1.4:1.4
[ 128.090000] scsi 1:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 128.110000] scsi 2:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 128.150000] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 130.070000] option1 ttyUSB1: option_instat_callback: error -2
[ 131.120000] option1 ttyUSB1: option_instat_callback: error -2
[ 133.840000] option1 ttyUSB1: option_instat_callback: error -2
[ 135.550000] option1 ttyUSB1: option_instat_callback: error -2
[ 136.610000] option1 ttyUSB1: option_instat_callback: error -2
[ 139.200000] option1 ttyUSB1: option_instat_callback: error -25 2015-04-26 13:05:02
Odp: Problem z drukarką Barrier Breaker (7 odpowiedzi, napisanych Oprogramowanie / Software)
Zrobiłem wg tej instrukcji niestety nie ma komunikacji z drukarką
Click on the Start button and select Devices and Printers.
Click on "Add a printer."
In the Add Printer dialog select "Add a local printer."
Select "Create a new port:" and set the type of port to "Standard TCP/IP Port". Then click Next.
In the "Hostname or IP address:" field enter the IP address of your router.
The "Port name:" field may be set to something you like.
De-select "Query the printer and automatically select the driver to use," then click next.
The computer will then attempt to detect the TCP/IP port. This will take some time and will most likely fail. Failing this step is not a problem.
On the "Additional port information required" page set the device type to Custom and click "Settings…"
Verify the Printer Name or IP Address. The Protocol should be set to "Raw" and the Raw Settings Port Number should be 9100. Leave LPR Settings and SNMP Status Enabled empty or de-selected. Then click OK.
Select the correct printer driver and click next. You may need to install drivers if they are not already available.
Finish the remaining printer installation wizard steps as needed. The printer should now be installed and working!6 2015-04-26 10:43:28
Temat: Problem z drukarką Barrier Breaker (7 odpowiedzi, napisanych Oprogramowanie / Software)
Witam,
Mam router wr842nd v2 z podpiętym aktywnym hubem. Do huba modem 3g oraz stara drukarka HP deskjet 3600.
Modem ładnie chodzi, ale z drukarką mam problem.
Logi
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 16.600000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 16.600000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 16.610000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 16.720000] u32 classifier
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 16.730000] input device check on
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 16.730000] Actions configured
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 16.740000] Mirror/redirect action on
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 16.760000] fuse init (API version 7.22)
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 16.840000] usbcore: registered new interface driver cdc_acm
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 16.850000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 16.860000] usbcore: registered new interface driver cdc_wdm
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 16.870000] ip_tables: (C) 2000-2006 Netfilter Core Team
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 16.950000] usblp 1-1.1:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7204
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 16.960000] usbcore: registered new interface driver usblp
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 16.990000] usbcore: registered new interface driver usbserial
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.010000] usbcore: registered new interface driver usbserial_generic
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.010000] usbserial: USB Serial support registered for generic
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.120000] xt_time: kernel timezone is -0000
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.140000] usbcore: registered new interface driver cdc_ether
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.160000] usbcore: registered new interface driver cdc_ncm
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.180000] usb 1-1.4: MAC-Address: 00:1e:10:1f:00:00
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.180000] huawei_cdc_ncm 1-1.4:1.2: cdc-wdm0: USB WDM device
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.200000] huawei_cdc_ncm 1-1.4:1.2 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform-1.4, Huawei CDC NCM device, 00:1e:10:1f:00:00
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.210000] usbcore: registered new interface driver huawei_cdc_ncm
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.250000] PPP generic driver version 2.4.2
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.250000] PPP MPPE Compression module registered
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.270000] NET: Registered protocol family 24
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.270000] PPTP driver version 0.8.5
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.290000] usbcore: registered new interface driver qmi_wwan
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.310000] usbcore: registered new interface driver rndis_host
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.320000] usbcore: registered new interface driver sierra
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.320000] usbserial: USB Serial support registered for Sierra USB modem
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.340000] usbcore: registered new interface driver sierra_net
Fri Apr 24 11:01:55 2015 kern.debug kernel: [ 17.400000] ath: EEPROM regdomain: 0x0
Fri Apr 24 11:01:55 2015 kern.debug kernel: [ 17.400000] ath: EEPROM indicates default country code should be used
Fri Apr 24 11:01:55 2015 kern.debug kernel: [ 17.400000] ath: doing EEPROM country->regdmn map search
Fri Apr 24 11:01:55 2015 kern.debug kernel: [ 17.400000] ath: country maps to regdmn code: 0x3a
Fri Apr 24 11:01:55 2015 kern.debug kernel: [ 17.400000] ath: Country alpha2 being used: US
Fri Apr 24 11:01:55 2015 kern.debug kernel: [ 17.400000] ath: Regpair used: 0x3a
Fri Apr 24 11:01:55 2015 kern.debug kernel: [ 17.420000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.420000] cfg80211: Calling CRDA for country: US
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.430000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.440000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.450000] cfg80211: Regulatory domain changed to country: US
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.450000] cfg80211: DFS Master region: FCC
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.460000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.470000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.480000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.480000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.490000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.500000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.520000] usbcore: registered new interface driver option
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.520000] usbserial: USB Serial support registered for GSM modem (1-port)
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.530000] option 1-1.4:1.0: GSM modem (1-port) converter detected
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.560000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.560000] option 1-1.4:1.1: GSM modem (1-port) converter detected
Fri Apr 24 11:01:55 2015 kern.info kernel: [ 17.570000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
Fri Apr 24 11:01:59 2015 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Fri Apr 24 11:01:59 2015 user.err syslog: /dev/mtdblock3 is already mounted
Fri Apr 24 11:01:59 2015 user.emerg syslog: block: /dev/mtdblock3 is already mounted
Fri Apr 24 11:02:00 2015 authpriv.info dropbear[1325]: Not backgrounding
Fri Apr 24 11:02:00 2015 authpriv.warn dropbear[1326]: Failed listening on '22': Error listening: Address already in use
Fri Apr 24 11:02:00 2015 authpriv.info dropbear[1326]: Early exit: No listening ports available.
Fri Apr 24 11:02:01 2015 lpr.err p9100d[1339]: bind: Cannot assign requested address
Fri Apr 24 11:02:01 2015 lpr.err p9100d[1339]: accept: Bad file descriptor
Fri Apr 24 11:02:02 2015 user.err syslog: module is already loaded - xt_multiport
Fri Apr 24 11:02:02 2015 user.err syslog: module is already loaded - xt_comment
Fri Apr 24 11:02:02 2015 user.err syslog: module is already loaded - xt_length
Fri Apr 24 11:02:04 2015 user.err syslog: module is already loaded - xt_multiport
Fri Apr 24 11:02:04 2015 user.err syslog: module is already loaded - xt_comment
Fri Apr 24 11:02:04 2015 user.err syslog: module is already loaded - xt_length
Fri Apr 24 11:02:06 2015 kern.info kernel: [ 30.950000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Fri Apr 24 11:02:06 2015 kern.info kernel: [ 30.950000] device eth1 entered promiscuous mode
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'lan' is enabled
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'lan' is setting up now
Fri Apr 24 11:02:06 2015 kern.info kernel: [ 30.980000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'lan' is now up
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'loopback' is enabled
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'loopback' is now up
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'tmobile' is setting up now
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'wan' is enabled
Fri Apr 24 11:02:06 2015 kern.info kernel: [ 31.070000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Network device 'lo' link is up
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'loopback' has link connectivity
Fri Apr 24 11:02:07 2015 kern.info kernel: [ 32.330000] cfg80211: Calling CRDA for country: PL
Fri Apr 24 11:02:07 2015 kern.info kernel: [ 32.370000] cfg80211: Regulatory domain changed to country: PL
Fri Apr 24 11:02:07 2015 kern.info kernel: [ 32.370000] cfg80211: DFS Master region: ETSI
Fri Apr 24 11:02:07 2015 kern.info kernel: [ 32.380000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Fri Apr 24 11:02:07 2015 kern.info kernel: [ 32.390000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Fri Apr 24 11:02:07 2015 kern.info kernel: [ 32.390000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Fri Apr 24 11:02:07 2015 kern.info kernel: [ 32.400000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
Fri Apr 24 11:02:07 2015 kern.info kernel: [ 32.410000] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
Fri Apr 24 11:02:07 2015 kern.info kernel: [ 32.420000] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Fri Apr 24 11:02:08 2015 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Apr 24 11:02:08 2015 kern.err kernel: [ 33.240000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:02:09 2015 daemon.crit xl2tpd[1729]: setsockopt recvref[30]: Protocol not available
Fri Apr 24 11:02:09 2015 daemon.info xl2tpd[1729]: Using l2tp kernel support.
Fri Apr 24 11:02:09 2015 daemon.info xl2tpd[1730]: xl2tpd version xl2tpd-1.3.6 started on OpenWrt PID:1730
Fri Apr 24 11:02:09 2015 daemon.info xl2tpd[1730]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc.
Fri Apr 24 11:02:09 2015 daemon.info xl2tpd[1730]: Forked by Scott Balmos and David Stipp, (C) 2001
Fri Apr 24 11:02:09 2015 daemon.info xl2tpd[1730]: Inherited by Jeff McAdams, (C) 2002
Fri Apr 24 11:02:09 2015 daemon.info xl2tpd[1730]: Forked again by Xelerance (www.xelerance.com) (C) 2006
Fri Apr 24 11:02:09 2015 daemon.info xl2tpd[1730]: Listening on IP address 0.0.0.0, port 1701
Fri Apr 24 11:02:09 2015 daemon.notice netifd: tmobile (1594): Trying to set mode
Fri Apr 24 11:02:10 2015 kern.info kernel: [ 35.140000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Fri Apr 24 11:02:10 2015 kern.info kernel: [ 35.250000] device wlan0 entered promiscuous mode
Fri Apr 24 11:02:10 2015 kern.err kernel: [ 35.750000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:02:11 2015 user.emerg syslog: setting up led WAN
Fri Apr 24 11:02:11 2015 user.emerg syslog: setting up led LAN1
Fri Apr 24 11:02:11 2015 user.emerg syslog: setting up led LAN2
Fri Apr 24 11:02:11 2015 user.emerg syslog: setting up led LAN3
Fri Apr 24 11:02:11 2015 user.emerg syslog: setting up led LAN4
Fri Apr 24 11:02:11 2015 user.emerg syslog: setting up led WLAN
Fri Apr 24 11:02:11 2015 user.emerg syslog: setting up led USB
Fri Apr 24 11:02:11 2015 daemon.notice pppd[1791]: pppd 2.4.7 started by root, uid 0
Fri Apr 24 11:02:11 2015 kern.info kernel: [ 36.690000] br-lan: port 2(wlan0) entered forwarding state
Fri Apr 24 11:02:11 2015 kern.info kernel: [ 36.690000] br-lan: port 2(wlan0) entered forwarding state
Fri Apr 24 11:02:11 2015 kern.info kernel: [ 36.700000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Fri Apr 24 11:02:11 2015 daemon.notice netifd: Bridge 'br-lan' link is up
Fri Apr 24 11:02:11 2015 daemon.notice netifd: Interface 'lan' has link connectivity
Fri Apr 24 11:02:11 2015 kern.info kernel: [ 36.730000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Fri Apr 24 11:02:12 2015 user.emerg syslog: - init complete -
Fri Apr 24 11:02:12 2015 daemon.notice netifd: Network device 'wlan0' link is up
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: abort on (BUSY)
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: abort on (NO CARRIER)
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: abort on (ERROR)
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: report (CONNECT)
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: timeout set to 10 seconds
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: send (AT&F^M)
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: expect (OK)
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: AT&F^M^M
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: OK
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: -- got it
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: send (ATE1^M)
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: expect (OK)
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: ^M
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: ATE1^M^M
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: OK
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: -- got it
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: send (AT+CGDCONT=1,"IP","internet"^M)
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: timeout set to 30 seconds
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: expect (OK)
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: ^M
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: AT+CGDCONT=1,"IP","internet"^M^M
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: OK
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: -- got it
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: send (ATD*99***1#^M)
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: expect (CONNECT)
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: ^M
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: ATD*99***1#^M^M
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: CONNECT
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: -- got it
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: send ( ^M)
Fri Apr 24 11:02:13 2015 daemon.info pppd[1791]: Serial connection established.
Fri Apr 24 11:02:13 2015 daemon.info pppd[1791]: Using interface 3g-tmobile
Fri Apr 24 11:02:13 2015 daemon.notice pppd[1791]: Connect: 3g-tmobile <--> /dev/ttyUSB1
Fri Apr 24 11:02:13 2015 kern.info kernel: [ 38.690000] br-lan: port 2(wlan0) entered forwarding state
Fri Apr 24 11:02:15 2015 daemon.info dnsmasq[1890]: started, version 2.71 cachesize 150
Fri Apr 24 11:02:15 2015 daemon.info dnsmasq[1890]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Fri Apr 24 11:02:15 2015 daemon.info dnsmasq-dhcp[1890]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Fri Apr 24 11:02:15 2015 daemon.info dnsmasq[1890]: using local addresses only for domain lan
Fri Apr 24 11:02:15 2015 daemon.warn dnsmasq[1890]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Apr 24 11:02:15 2015 daemon.info dnsmasq[1890]: read /etc/hosts - 1 addresses
Fri Apr 24 11:02:15 2015 daemon.info dnsmasq[1890]: read /tmp/hosts/dhcp - 1 addresses
Fri Apr 24 11:02:15 2015 daemon.info dnsmasq-dhcp[1890]: read /etc/ethers - 0 addresses
Fri Apr 24 11:02:16 2015 user.notice upnp daemon: external interface not found, not starting
Fri Apr 24 11:02:16 2015 daemon.warn pppd[1791]: Could not determine remote IP address: defaulting to 10.64.64.64
Fri Apr 24 11:02:16 2015 daemon.notice pppd[1791]: local IP address 100.118.189.34
Fri Apr 24 11:02:16 2015 daemon.notice pppd[1791]: remote IP address 10.64.64.64
Fri Apr 24 11:02:16 2015 daemon.notice pppd[1791]: primary DNS address 213.158.199.1
Fri Apr 24 11:02:16 2015 daemon.notice pppd[1791]: secondary DNS address 213.158.199.5
Fri Apr 24 11:02:16 2015 daemon.notice netifd: Network device '3g-tmobile' link is up
Fri Apr 24 11:02:16 2015 daemon.notice netifd: Interface 'tmobile' is now up
Fri Apr 24 11:02:18 2015 user.notice firewall: Reloading firewall due to ifup of tmobile (3g-tmobile)
Fri Apr 24 11:02:18 2015 daemon.info dnsmasq[1890]: reading /tmp/resolv.conf.auto
Fri Apr 24 11:02:18 2015 daemon.info dnsmasq[1890]: using local addresses only for domain lan
Fri Apr 24 11:02:18 2015 daemon.info dnsmasq[1890]: using nameserver 213.158.199.1#53
Fri Apr 24 11:02:18 2015 daemon.info dnsmasq[1890]: using nameserver 213.158.199.5#53
Fri Apr 24 11:02:20 2015 daemon.err miniupnpd[2156]: could not open lease file: /var/upnp.leases
Fri Apr 24 11:02:20 2015 daemon.err miniupnpd[2156]: Why did you run me anyway?
Sun Apr 26 11:34:07 2015 daemon.info pppd[1791]: System time change detected.
Sun Apr 26 11:34:35 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: authenticated
Sun Apr 26 11:34:35 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: associated (aid 1)
Sun Apr 26 11:34:35 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df WPA: pairwise key handshake completed (RSN)
Sun Apr 26 11:34:35 2015 daemon.info dnsmasq-dhcp[1890]: DHCPREQUEST(br-lan) 192.168.1.115 a4:17:31:19:3d:df
Sun Apr 26 11:34:35 2015 daemon.info dnsmasq-dhcp[1890]: DHCPACK(br-lan) 192.168.1.115 a4:17:31:19:3d:df laptop-agi
Sun Apr 26 11:34:36 2015 daemon.warn odhcpd[1274]: DHCPV6 CONFIRM IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: not on-link
Sun Apr 26 11:34:36 2015 daemon.info dnsmasq[1890]: read /etc/hosts - 1 addresses
Sun Apr 26 11:34:36 2015 daemon.info dnsmasq[1890]: read /tmp/hosts/odhcpd - 0 addresses
Sun Apr 26 11:34:36 2015 daemon.info dnsmasq[1890]: read /tmp/hosts/dhcp - 1 addresses
Sun Apr 26 11:34:36 2015 daemon.info dnsmasq-dhcp[1890]: read /etc/ethers - 0 addresses
Sun Apr 26 11:34:37 2015 daemon.warn odhcpd[1274]: DHCPV6 CONFIRM IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: not on-link
Sun Apr 26 11:34:37 2015 daemon.warn odhcpd[1274]: DHCPV6 SOLICIT IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: ok fd53:a2bb:741c::637/128
Sun Apr 26 11:34:38 2015 daemon.warn odhcpd[1274]: DHCPV6 REQUEST IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: ok fd53:a2bb:741c::637/128
Sun Apr 26 11:34:38 2015 daemon.info dnsmasq[1890]: read /etc/hosts - 1 addresses
Sun Apr 26 11:34:38 2015 daemon.info dnsmasq[1890]: read /tmp/hosts/odhcpd - 1 addresses
Sun Apr 26 11:34:38 2015 daemon.info dnsmasq[1890]: read /tmp/hosts/dhcp - 1 addresses
Sun Apr 26 11:34:38 2015 daemon.info dnsmasq-dhcp[1890]: read /etc/ethers - 0 addresses[ 0.000000] Linux version 3.10.49 (cezary@eko.one.pl) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #9 Sat Mar 28 08:55:37 CET 2015
[ 0.000000] MyLoader: sysp=9926862e, boardp=5f2bfe0e, parts=75c0efe4
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0001974c (MIPS 74Kc)
[ 0.000000] SoC: Atheros AR9341 rev 3
[ 0.000000] Clocks: CPU:535.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 80338b60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: board=TL-WR842N-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 28588k/32768k available (2386k kernel code, 4180k reserved, 620k data, 256k init, 0k highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.070000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.100000] MIPS: machine is TP-LINK TL-WR842N/ND v2
[ 0.520000] bio: create slab <bio-0> at 0
[ 0.520000] Switching to clocksource MIPS
[ 0.530000] NET: Registered protocol family 2
[ 0.530000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.540000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.550000] TCP: Hash tables configured (established 512 bind 512)
[ 0.550000] TCP: reno registered
[ 0.560000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.560000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.570000] NET: Registered protocol family 1
[ 0.570000] PCI: CLS 0 bytes, default 32
[ 0.590000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.600000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.610000] msgmni has been set to 55
[ 0.610000] io scheduler noop registered
[ 0.610000] io scheduler deadline registered (default)
[ 0.620000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.650000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[ 0.660000] console [ttyS0] enabled, bootconsole disabled
[ 0.670000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[ 0.680000] m25p80 spi0.0: found s25fl064k, expected m25p80
[ 0.690000] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[ 0.690000] 5 tp-link partitions found on MTD device spi0.0
[ 0.700000] Creating 5 MTD partitions on "spi0.0":
[ 0.700000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.710000] 0x000000020000-0x0000001303d8 : "kernel"
[ 0.710000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.730000] 0x0000001303d8-0x0000007f0000 : "rootfs"
[ 0.730000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.750000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.760000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.760000] 0x000000670000-0x0000007f0000 : "rootfs_data"
[ 0.770000] 0x0000007f0000-0x000000800000 : "art"
[ 0.780000] 0x000000020000-0x0000007f0000 : "firmware"
[ 0.800000] libphy: ag71xx_mdio: probed
[ 1.350000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
[ 1.370000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 1.920000] ag71xx-mdio.1: Found an AR934X built-in switch
[ 2.960000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.970000] TCP: cubic registered
[ 2.970000] NET: Registered protocol family 17
[ 2.980000] Bridge firewalling registered
[ 2.980000] 8021q: 802.1Q VLAN Support v1.8
[ 2.990000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 3.000000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 3.010000] Freeing unused kernel memory: 256K (80350000 - 80390000)
[ 6.440000] usbcore: registered new interface driver usbfs
[ 6.450000] usbcore: registered new interface driver hub
[ 6.450000] usbcore: registered new device driver usb
[ 6.500000] SCSI subsystem initialized
[ 6.510000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.520000] ehci-platform: EHCI generic platform driver
[ 6.530000] ehci-platform ehci-platform: EHCI Host Controller
[ 6.530000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 6.540000] ehci-platform ehci-platform: TX-TX IDP fix enabled
[ 6.550000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 6.580000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 6.580000] hub 1-0:1.0: USB hub found
[ 6.590000] hub 1-0:1.0: 1 port detected
[ 6.590000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.610000] usbcore: registered new interface driver usb-storage
[ 7.030000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 7.390000] hub 1-1:1.0: USB hub found
[ 7.390000] hub 1-1:1.0: 4 ports detected
[ 7.680000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
[ 7.870000] usb 1-1.4: new high-speed USB device number 4 using ehci-platform
[ 7.980000] usb-storage 1-1.4:1.3: USB Mass Storage device detected
[ 7.990000] scsi0 : usb-storage 1-1.4:1.3
[ 7.990000] usb-storage 1-1.4:1.4: USB Mass Storage device detected
[ 8.000000] scsi1 : usb-storage 1-1.4:1.4
[ 8.990000] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 9.010000] scsi 1:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 9.020000] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 12.190000] jffs2: notice: (398) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 33 of xref (0 dead, 9 orphan) found.
[ 12.210000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 12.210000] block: unable to load configuration (fstab: Entry not found)
[ 12.220000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[ 12.230000] block: extroot: not configured
[ 12.280000] jffs2: notice: (395) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 33 of xref (0 dead, 9 orphan) found.
[ 12.510000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 12.520000] block: unable to load configuration (fstab: Entry not found)
[ 12.530000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[ 12.540000] block: extroot: not configured
[ 16.340000] NET: Registered protocol family 10
[ 16.370000] l2tp_core: L2TP core driver, V2.0
[ 16.380000] l2tp_netlink: L2TP netlink interface
[ 16.400000] gre: GRE over IPv4 demultiplexor driver
[ 16.420000] ip_gre: GRE over IPv4 tunneling driver
[ 16.440000] nf_conntrack version 0.5.0 (450 buckets, 1800 max)
[ 16.460000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.490000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[ 16.500000] Backport generated by backports.git backports-20140320-37-g5c33da0
[ 16.530000] cfg80211: Calling CRDA to update world regulatory domain
[ 16.530000] cfg80211: World regulatory domain updated:
[ 16.540000] cfg80211: DFS Master region: unset
[ 16.540000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 16.550000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.560000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.570000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.580000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.590000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 16.600000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 16.600000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.610000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 16.720000] u32 classifier
[ 16.730000] input device check on
[ 16.730000] Actions configured
[ 16.740000] Mirror/redirect action on
[ 16.760000] fuse init (API version 7.22)
[ 16.840000] usbcore: registered new interface driver cdc_acm
[ 16.850000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 16.860000] usbcore: registered new interface driver cdc_wdm
[ 16.870000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.950000] usblp 1-1.1:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7204
[ 16.960000] usbcore: registered new interface driver usblp
[ 16.990000] usbcore: registered new interface driver usbserial
[ 17.010000] usbcore: registered new interface driver usbserial_generic
[ 17.010000] usbserial: USB Serial support registered for generic
[ 17.120000] xt_time: kernel timezone is -0000
[ 17.140000] usbcore: registered new interface driver cdc_ether
[ 17.160000] usbcore: registered new interface driver cdc_ncm
[ 17.180000] usb 1-1.4: MAC-Address: 00:1e:10:1f:00:00
[ 17.180000] huawei_cdc_ncm 1-1.4:1.2: cdc-wdm0: USB WDM device
[ 17.200000] huawei_cdc_ncm 1-1.4:1.2 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform-1.4, Huawei CDC NCM device, 00:1e:10:1f:00:00
[ 17.210000] usbcore: registered new interface driver huawei_cdc_ncm
[ 17.250000] PPP generic driver version 2.4.2
[ 17.250000] PPP MPPE Compression module registered
[ 17.270000] NET: Registered protocol family 24
[ 17.270000] PPTP driver version 0.8.5
[ 17.290000] usbcore: registered new interface driver qmi_wwan
[ 17.310000] usbcore: registered new interface driver rndis_host
[ 17.320000] usbcore: registered new interface driver sierra
[ 17.320000] usbserial: USB Serial support registered for Sierra USB modem
[ 17.340000] usbcore: registered new interface driver sierra_net
[ 17.400000] ath: EEPROM regdomain: 0x0
[ 17.400000] ath: EEPROM indicates default country code should be used
[ 17.400000] ath: doing EEPROM country->regdmn map search
[ 17.400000] ath: country maps to regdmn code: 0x3a
[ 17.400000] ath: Country alpha2 being used: US
[ 17.400000] ath: Regpair used: 0x3a
[ 17.420000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 17.420000] cfg80211: Calling CRDA for country: US
[ 17.430000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
[ 17.440000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 17.450000] cfg80211: Regulatory domain changed to country: US
[ 17.450000] cfg80211: DFS Master region: FCC
[ 17.460000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 17.470000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 17.480000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[ 17.480000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 17.490000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 17.500000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 17.520000] usbcore: registered new interface driver option
[ 17.520000] usbserial: USB Serial support registered for GSM modem (1-port)
[ 17.530000] option 1-1.4:1.0: GSM modem (1-port) converter detected
[ 17.560000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
[ 17.560000] option 1-1.4:1.1: GSM modem (1-port) converter detected
[ 17.570000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
[ 30.950000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 30.950000] device eth1 entered promiscuous mode
[ 30.980000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 31.070000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.330000] cfg80211: Calling CRDA for country: PL
[ 32.370000] cfg80211: Regulatory domain changed to country: PL
[ 32.370000] cfg80211: DFS Master region: ETSI
[ 32.380000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 32.390000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 32.390000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 32.400000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
[ 32.410000] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
[ 32.420000] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 33.240000] option1 ttyUSB1: option_instat_callback: error -2
[ 35.140000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.250000] device wlan0 entered promiscuous mode
[ 35.750000] option1 ttyUSB1: option_instat_callback: error -2
[ 36.690000] br-lan: port 2(wlan0) entered forwarding state
[ 36.690000] br-lan: port 2(wlan0) entered forwarding state
[ 36.700000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.730000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 38.690000] br-lan: port 2(wlan0) entered forwarding stateKonfiguracja drukarki w LUCI
/dev/usb/lp0
interfejs LAN
port 9100
i niestety nie udaje mi się jej zainstalować pod windows 8.1.
Poproszę o podpowiedzi.
7 2013-07-12 17:32:49
Odp: Skrypt kopiowania plików - NSA310 (18 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
Umieść sobie reboot pod przyciskiem i zobacz czy działa
Zamieniłem przyciski POWER <-> COPY i działają
8 2013-07-12 16:41:49
Odp: Skrypt kopiowania plików - NSA310 (18 odpowiedzi, napisanych Oprogramowanie / Software)
Witam
Mam na NSA310 zainstalowanego debiana 7.1 przycisk power działa niestety nie mogę uruchomic przycisku COPY/SYNC.
Sam skrypt wywołany z konsoli kopiuje zawartość usb do wskazanego katalogu - niesty przycisk nie działa - konfiguracja jak w pierwszym poście.
9 2013-04-11 16:05:24
Odp: TL-WR1043ND + HUAWEI E3131 + Aero2 - nie widzi modemu (68 odpowiedzi, napisanych Oprogramowanie / Software)
hej,
zrobiłem firstboot'a i wszystko ładnie chodzi. Dzięki za wszelką pomoc.
Jednak ustawiłem mały serwerek na terminalu HP, ponieważ router TL-WR842ND nie dawał rady z serwerem dlna + samba + mpd + transmission do tego jeszcze miałem problem z ustawieniem głośników 5.1.
Teraz jest wszystko jak należy
pozdrawiam
10 2013-04-02 15:23:29
Odp: TL-WR1043ND + HUAWEI E3131 + Aero2 - nie widzi modemu (68 odpowiedzi, napisanych Oprogramowanie / Software)
Jednak jest jakiś problem z tym modemem.
Raz chodzi ok innym razem restartuje non stop
Logread
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.000000] Memory: 28976k/32768k available (2227k kernel code, 3792k reserved, 421k data, 216k init, 0k highmem)
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.000000] NR_IRQS:51
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.080000] pid_max: default: 32768 minimum: 301
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.080000] Mount-cache hash table entries: 512
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.090000] NET: Registered protocol family 16
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.090000] gpiochip_add: registered GPIOs 0 to 17 on device: ath79
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.100000] MIPS: machine is TP-LINK TL-MR3420
Jan 1 01:00:22 Gargoyle kern.warn kernel: [ 0.500000] registering PCI controller with io_map_base unset
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.540000] bio: create slab <bio-0> at 0
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.550000] PCI host bridge to bus 0000:00
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.550000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.560000] pci_bus 0000:00: root bus resource [io 0x0000]
Jan 1 01:00:22 Gargoyle kern.debug kernel: [ 0.560000] pci 0000:00:00.0: [168c:002e] type 0 class 0x000280
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.560000] pci 0000:00:00.0: fixup device configuration
Jan 1 01:00:22 Gargoyle kern.debug kernel: [ 0.570000] pci 0000:00:00.0: reg 10: [mem 0x10000000-0x1000ffff 64bit]
Jan 1 01:00:22 Gargoyle kern.debug kernel: [ 0.570000] pci 0000:00:00.0: supports D1
Jan 1 01:00:22 Gargoyle kern.debug kernel: [ 0.570000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.570000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.570000] pci 0000:00:00.0: using irq 40 for pin 1
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.580000] Switching to clocksource MIPS
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 0.580000] NET: Registered protocol family 2
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 12.680000] usbcore: registered new device driver usb
Jan 1 01:00:22 Gargoyle kern.warn kernel: [ 13.700000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Jan 1 01:00:22 Gargoyle kern.debug kernel: [ 13.710000] ath: EEPROM regdomain: 0x0
Jan 1 01:00:22 Gargoyle kern.debug kernel: [ 13.710000] ath: EEPROM indicates default country code should be used
Jan 1 01:00:22 Gargoyle kern.debug kernel: [ 13.710000] ath: doing EEPROM country->regdmn map search
Jan 1 01:00:22 Gargoyle kern.debug kernel: [ 13.710000] ath: country maps to regdmn code: 0x3a
Jan 1 01:00:22 Gargoyle kern.debug kernel: [ 13.710000] ath: Country alpha2 being used: US
Jan 1 01:00:22 Gargoyle kern.debug kernel: [ 13.710000] ath: Regpair used: 0x3a
Jan 1 01:00:22 Gargoyle kern.debug kernel: [ 13.720000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Jan 1 01:00:22 Gargoyle kern.debug kernel: [ 13.720000] Registered led device: ath9k-phy0
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 13.720000] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xb0000000, irq=40
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 13.730000] cfg80211: Calling CRDA for country: US
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 13.730000] cfg80211: Regulatory domain changed to country: US
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 13.740000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 13.750000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 13.760000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 13.760000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 13.770000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 13.780000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 13.790000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 14.470000] RPC: Registered named UNIX socket transport module.
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 14.480000] RPC: Registered udp transport module.
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 14.480000] RPC: Registered tcp transport module.
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 14.490000] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 14.990000] PPP generic driver version 2.4.2
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 15.140000] tun: Universal TUN/TAP device driver, 1.6
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 15.150000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 15.280000] GRE over IPv4 demultiplexor driver
Jan 1 01:00:22 Gargoyle kern.warn kernel: [ 15.400000] ip_gre: Unknown symbol icmpv6_send (err 0)
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 15.760000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 15.870000] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 16.320000] NET: Registered protocol family 24
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 16.550000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 16.560000] ehci-platform ehci-platform: Generic Platform EHCI Controller
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 16.560000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 16.600000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 16.620000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 16.620000] hub 1-0:1.0: USB hub found
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 16.630000] hub 1-0:1.0: 1 port detected
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 16.750000] nf_conntrack version 0.5.0 (456 buckets, 1824 max)
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 17.300000] PPTP driver version 0.8.5
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 18.130000] xt_time: kernel timezone is -0000
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 19.020000] Hooked IMQ after mangle on PREROUTING
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 19.020000] Hooked IMQ after nat on POSTROUTING
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 19.030000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 19.220000] Netfilter messages via NETLINK v0.30.
Jan 1 01:00:22 Gargoyle kern.notice kernel: [ 19.460000] ip_set: protocol 6
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 20.130000] usbcore: registered new interface driver cdc_acm
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 20.140000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 20.300000] usbcore: registered new interface driver usblp
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 20.330000] usbcore: registered new interface driver usbserial
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 20.340000] USB Serial support registered for generic
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 20.350000] usbcore: registered new interface driver usbserial_generic
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 20.350000] usbserial: USB Serial Driver core
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 20.440000] Initializing USB Mass Storage driver...
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 20.450000] usbcore: registered new interface driver usb-storage
Jan 1 01:00:22 Gargoyle kern.info kernel: [ 20.450000] USB Mass Storage support registered.
Jan 1 01:00:27 Gargoyle daemon.notice netifd: Interface 'lan' is now up
Jan 1 01:00:27 Gargoyle kern.info kernel: [ 27.840000] device eth0 entered promiscuous mode
Jan 1 01:00:27 Gargoyle daemon.notice netifd: Interface 'loopback' is now up
Jan 1 01:00:28 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Jan 1 01:00:28 Gargoyle user.notice ifup: Enabling Router Solicitations on lan (br-lan)
Jan 1 01:00:31 Gargoyle user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
Jan 1 01:00:32 Gargoyle kern.info kernel: [ 32.700000] cfg80211: Calling CRDA for country: PL
Jan 1 01:00:32 Gargoyle kern.info kernel: [ 32.700000] cfg80211: Regulatory domain changed to country: PL
Jan 1 01:00:32 Gargoyle kern.info kernel: [ 32.710000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 01:00:32 Gargoyle kern.info kernel: [ 32.720000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 1 01:00:32 Gargoyle kern.info kernel: [ 32.730000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 1 01:00:32 Gargoyle kern.info kernel: [ 32.730000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 1 01:00:32 Gargoyle kern.info kernel: [ 32.740000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 1 01:00:34 Gargoyle kern.info kernel: [ 34.740000] device wlan0 entered promiscuous mode
Jan 1 01:00:35 Gargoyle kern.info kernel: [ 35.110000] br-lan: port 2(wlan0) entered forwarding state
Jan 1 01:00:35 Gargoyle kern.info kernel: [ 35.110000] br-lan: port 2(wlan0) entered forwarding state
Jan 1 01:00:37 Gargoyle kern.info kernel: [ 37.110000] br-lan: port 2(wlan0) entered forwarding state
Apr 2 16:00:01 Gargoyle user.info sysinit: uci: Entry not found
Apr 2 16:00:02 Gargoyle user.info sysinit: Using intrapositioned negation (`--option ! this`) is deprecated in favor of extrapositioned (`! --option this`).
Apr 2 16:00:02 Gargoyle user.info sysinit: Bad argument `ACCEPT'
Apr 2 16:00:02 Gargoyle user.info sysinit: Try `iptables -h' or 'iptables --help' for more information.
Apr 2 16:00:02 Gargoyle user.info sysinit: Bad argument `MASQUERADE'
Apr 2 16:00:02 Gargoyle user.info sysinit: Try `iptables -h' or 'iptables --help' for more information.
Apr 2 16:00:04 Gargoyle user.info sysinit: Loading defaults
Apr 2 16:00:04 Gargoyle user.info sysinit: Loading synflood protection
Apr 2 16:00:05 Gargoyle user.info sysinit: Adding custom chains
Apr 2 16:00:06 Gargoyle user.info sysinit: Loading zones
Apr 2 16:00:07 Gargoyle user.info sysinit: Loading forwardings
Apr 2 16:00:07 Gargoyle user.info sysinit: Loading rules
Apr 2 16:00:08 Gargoyle user.info sysinit: Loading redirects
Apr 2 16:00:08 Gargoyle user.info sysinit: Loading includes
Apr 2 16:00:10 Gargoyle user.info sysinit: Optimizing conntrack
Apr 2 16:00:10 Gargoyle user.info sysinit: Loading interfaces
Apr 2 16:00:10 Gargoyle user.info firewall: adding lan (br-lan) to zone lan
Apr 2 16:00:11 Gargoyle daemon.info hostapd: wlan0: STA 5c:b5:24:59:33:97 IEEE 802.11: authenticated
Apr 2 16:00:11 Gargoyle daemon.info hostapd: wlan0: STA 5c:b5:24:59:33:97 IEEE 802.11: associated (aid 1)
Apr 2 16:00:11 Gargoyle daemon.info hostapd: wlan0: STA 5c:b5:24:59:33:97 WPA: pairwise key handshake completed (RSN)
Apr 2 16:00:13 Gargoyle authpriv.info dropbear[1672]: Running in background
Apr 2 16:00:14 Gargoyle daemon.warn httpd_gargoyle[1709]: started as root without requesting chroot(), warning only
Apr 2 16:00:14 Gargoyle daemon.notice httpd_gargoyle[1709]: httpd_gargoyle/1.0 14mar2008 starting on Gargoyle, port 80
Apr 2 16:00:15 Gargoyle user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Apr 2 16:00:15 Gargoyle user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Apr 2 16:00:17 Gargoyle daemon.info hostapd: wlan0: STA 00:19:d2:88:b9:6c IEEE 802.11: authenticated
Apr 2 16:00:17 Gargoyle daemon.info hostapd: wlan0: STA 00:19:d2:88:b9:6c IEEE 802.11: associated (aid 2)
Apr 2 16:00:17 Gargoyle daemon.info hostapd: wlan0: STA 00:19:d2:88:b9:6c WPA: pairwise key handshake completed (RSN)
Apr 2 16:00:19 Gargoyle daemon.info dnsmasq[1844]: started, version 2.62 cachesize 150
Apr 2 16:00:19 Gargoyle daemon.info dnsmasq[1844]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Apr 2 16:00:19 Gargoyle daemon.info dnsmasq-dhcp[1844]: DHCP, IP range 192.168.1.5 -- 192.168.1.23, lease time 8h
Apr 2 16:00:19 Gargoyle daemon.info dnsmasq[1844]: using local addresses only for domain lan
Apr 2 16:00:19 Gargoyle daemon.info dnsmasq[1844]: reading /tmp/resolv.conf.auto
Apr 2 16:00:19 Gargoyle daemon.warn dnsmasq[1844]: ignoring nameserver 192.168.1.1 - local interface
Apr 2 16:00:19 Gargoyle daemon.info dnsmasq[1844]: using local addresses only for domain lan
Apr 2 16:00:19 Gargoyle daemon.info dnsmasq[1844]: read /etc/hosts - 3 addresses
Apr 2 16:00:19 Gargoyle daemon.info dnsmasq-dhcp[1844]: read /etc/ethers - 1 addresses
Apr 2 16:00:19 Gargoyle user.err syslog: error starting threads: errno 89 (Function not implemented)
Apr 2 16:00:19 Gargoyle user.info sysinit: exportfs: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Apr 2 16:00:19 Gargoyle user.info sysinit: exportfs: can't lock /var/lib/nfs/etab for writing
Apr 2 16:00:19 Gargoyle user.info sysinit: exportfs: could not open /var/lib/nfs/.xtab.lock for locking: errno 2 (No such file or directory)
Apr 2 16:00:19 Gargoyle user.info sysinit: exportfs: can't lock /var/lib/nfs/xtab for writing
Apr 2 16:00:22 Gargoyle user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Apr 2 16:00:22 Gargoyle user.info sysinit: (Did you specify correct configuration file path?)
Apr 2 16:00:23 Gargoyle user.notice ifup: Enabling Router Solicitations on loopback (lo)
Apr 2 16:00:24 Gargoyle daemon.info dnsmasq-dhcp[1844]: DHCPDISCOVER(br-lan) 5c:b5:24:59:33:96
Apr 2 16:00:24 Gargoyle daemon.info dnsmasq-dhcp[1844]: DHCPOFFER(br-lan) 192.168.1.16 5c:b5:24:59:33:96
Apr 2 16:00:24 Gargoyle daemon.info dnsmasq-dhcp[1844]: DHCPREQUEST(br-lan) 192.168.1.23 00:19:d2:88:b9:6b
Apr 2 16:00:24 Gargoyle daemon.info dnsmasq-dhcp[1844]: DHCPACK(br-lan) 192.168.1.23 00:19:d2:88:b9:6b Notebook
Apr 2 16:00:24 Gargoyle daemon.info dnsmasq-dhcp[1844]: DHCPREQUEST(br-lan) 192.168.1.23 00:19:d2:88:b9:6b
Apr 2 16:00:24 Gargoyle daemon.info dnsmasq-dhcp[1844]: DHCPACK(br-lan) 192.168.1.23 00:19:d2:88:b9:6b Notebook
Apr 2 16:00:24 Gargoyle daemon.info dnsmasq-dhcp[1844]: DHCPREQUEST(br-lan) 192.168.1.16 5c:b5:24:59:33:96
Apr 2 16:00:24 Gargoyle daemon.info dnsmasq-dhcp[1844]: DHCPACK(br-lan) 192.168.1.16 5c:b5:24:59:33:96 android
Apr 2 16:00:26 Gargoyle daemon.info dnsmasq-dhcp[1844]: DHCPINFORM(br-lan) 192.168.1.23 00:19:d2:88:b9:6v
Apr 2 16:00:26 Gargoyle daemon.info dnsmasq-dhcp[1844]: DHCPACK(br-lan) 192.168.1.23 00:19:d2:88:b9:6v Notebook
Apr 2 16:00:47 Gargoyle user.notice root: vsftpd init: mounted = 0
Apr 2 16:00:47 Gargoyle user.info sysinit: ERROR: No drives attached, no directories to share!
Apr 2 16:00:47 Gargoyle user.info sysinit: setting up led USB
Apr 2 16:01:05 Gargoyle authpriv.info dropbear[2051]: Child connection from 192.168.1.23:63531
Apr 2 16:01:13 Gargoyle authpriv.notice dropbear[2051]: Password auth succeeded for 'root' from 192.168.1.23:63531
Success11 2013-03-29 09:43:14
Odp: TL-WR1043ND + HUAWEI E3131 + Aero2 - nie widzi modemu (68 odpowiedzi, napisanych Oprogramowanie / Software)
Jednak problem powraca. Jeśli wyciągnę modem lub zrestartuję router komendę
Cezary napisał/a:
echo "12d1 151d" > /sys/bus/usb-serial/drivers/option1/new_id
muszę ponowić.
12 2013-03-27 17:00:43
Odp: TL-WR1043ND + HUAWEI E3131 + Aero2 - nie widzi modemu (68 odpowiedzi, napisanych Oprogramowanie / Software)
wielkie dzięki
chodzi bez porównania lepiej od E220.
13 2013-03-27 16:48:14
Odp: TL-WR1043ND + HUAWEI E3131 + Aero2 - nie widzi modemu (68 odpowiedzi, napisanych Oprogramowanie / Software)
cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.03
S: Manufacturer=Linux 3.3.8 ehci_hcd
S: Product=Generic Platform EHCI Controller
S: SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=151d Rev= 1.02
S: Manufacturer=HUAWEI
S: Product=HUAWEI Mobile
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=cdc_ncm
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I:* If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=cdc_ncm
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=03 Driver=(none)
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=02 Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms14 2013-03-27 16:23:17
Odp: TL-WR1043ND + HUAWEI E3131 + Aero2 - nie widzi modemu (68 odpowiedzi, napisanych Oprogramowanie / Software)
ok dzięki za odpowiedź z tym że przez www jak ustawiam modem 3G to wywala błąd nie znaleziono urządzenia
15 2013-03-27 14:36:45
Odp: TL-WR1043ND + HUAWEI E3131 + Aero2 - nie widzi modemu (68 odpowiedzi, napisanych Oprogramowanie / Software)
Witam mam problem z tym modemem - nie mogę się podłączyć do sieci.
root@Gargoyle:~# ifconfig
br-lan Link encap:Ethernet HWaddr 64:70:02:52:CE:CD
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2546 errors:0 dropped:6 overruns:0 frame:0
TX packets:1266 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:189074 (184.6 KiB) TX bytes:386252 (377.1 KiB)
eth0 Link encap:Ethernet HWaddr 64:70:02:52:CE:CD
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:26901 errors:0 dropped:0 overruns:0 frame:0
TX packets:14809 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16457670 (15.6 MiB) TX bytes:997099 (973.7 KiB)
Interrupt:5
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:3168 errors:0 dropped:0 overruns:0 frame:0
TX packets:3168 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:190080 (185.6 KiB) TX bytes:190080 (185.6 KiB)
wlan0 Link encap:Ethernet HWaddr 64:70:02:52:CE:CE
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16001 errors:0 dropped:0 overruns:0 frame:0
TX packets:29389 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:1104326 (1.0 MiB) TX bytes:17551522 (16.7 MiB)
wwan0 Link encap:Ethernet HWaddr 58:2C:80:13:92:63
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)root@Gargoyle:~# uci show network
network.loopback=interface
network.loopback.ifname=lo
network.loopback.proto=static
network.loopback.ipaddr=127.0.0.1
network.loopback.netmask=255.0.0.0
network.lan=interface
network.lan.ifname=eth0
network.lan.type=bridge
network.lan.proto=static
network.lan.netmask=255.255.255.0
network.lan.dns=208.67.222.222 208.67.220.220
network.lan.ipaddr=192.168.1.3
network.wan=interface
network.wan.auto=1
network.wan.proto=dhcp
network.wan.dns=208.67.222.222 208.67.220.220
network.wan.peerdns=0
network.wan.ifname=wwan0
network.@switch[0]=switch
network.@switch[0].name=eth0
network.@switch[0].reset=1
network.@switch[0].enable_vlan=1
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device=eth0
network.@switch_vlan[0].vlan=1
network.@switch_vlan[0].ports=0 1 2 3 4poproszę o wskazówki
probowalem network.wan.ifname=wwan0
i network.wan.ifname=eth0
16 2013-03-13 22:05:07
Odp: Dźwięk 5.1/Stereo alsa (9 odpowiedzi, napisanych Oprogramowanie / Software)
Jeszcze pozostaje jeden problem z dzwiękiem.
Co jakiś czas muzyka się przycina.
Trochę duże użycie CPU przez mpd mi się zdaje - nieważne czy mp3 czy flac
Mem: 28288K used, 904K free, 0K shrd, 572K buff, 6128K cached
CPU: 84% usr 1% sys 0% nic 13% idle 0% io 0% irq 0% sirq
Load average: 1.45 1.28 1.14 2/70 4736
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
4513 1 root S 23156 79% 69% /usr/bin/mpd
17 2013-03-13 07:23:42
Odp: Dźwięk 5.1/Stereo alsa (9 odpowiedzi, napisanych Oprogramowanie / Software)
asound.conf
5.1 to stereo downmix
pcm.!default {
slave.pcm front
slave.channels 2
type route
ttable.0.0 1
ttable.1.1 1
ttable.0.4 1
ttable.1.5 1
#ttable.4.0 0.5
#ttable.4.1 0.5
#ttable.5.0 0.5
#ttable.5.1 0.5
}
jak robie speaker-test to gra tak jak chce, a mpd graja nadal tylko przednie 
takie ustawienie tez nic nie daje
pcm.!default {
type plug
slave.pcm "dmix"
slave.pcm "surround51"
slave.channels 6
route_policy duplicate
}
działam po omacku moge prosić o jakieś jeszcze wskazówki?
OK udało mi się przkopiować dzwięk na satelity z tym że teraz dzwięk przerywa...
Gotowe:
asound.conf
#Define the soundcard to use
pcm.snd_card {
type hw
card 0
device 0
}
# 6 channel dmix - output whatever audio, to all 8 speakers
pcm.dmix6 {
type dmix
ipc_key 321456 # any unique value
ipc_key_add_uid false
ipc_perm 0660
slave {
pcm "hw:0"
# rate 48000
channels 6
# period_time 0
# period_size 1024
# buffer_time 0
# buffer_size 5120
}
# Some cards, like the "nforce" variants require the following to be uncommented. It routes the audio to t he correct speakers.
bindings {
0 0
1 1
2 4
3 5
4 2
5 3
# 6 6
# 7 7
}
}
pcm.ch51dup {
type route
slave.pcm dmix6
slave.channels 6
ttable.0.0 1
ttable.1.1 1
ttable.0.2 0.5
ttable.1.3 0.5
ttable.0.5 1
ttable.1.5 1
#ttable.0.0 1
#ttable.1.1 1
#ttable.2.2 1
#ttable.3.3 1
#ttable.4.4 1
#ttable.5.5 1
}
mpd.conf
...
mixer_type "software"
audio_output {
type "alsa"
device "plug:ch51dup"
name "ch51dup"
auto_resample "no"
use_mmap "yes"
}
18 2013-03-11 22:57:18
Odp: Dźwięk 5.1/Stereo alsa (9 odpowiedzi, napisanych Oprogramowanie / Software)
ok
amixer set Speaker działa ok tylko nadal cisza w tylnich glosnikach przy mp3 filmu w 5.1 niestety nie mam do testow
mpd
Simple mixer control 'PCM',0
Capabilities: cvolume cswitch cswitch-joined penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 6928
Front Left: Capture 40 [1%] [-15.85dB] [on]
Front Right: Capture 40 [1%] [-15.85dB] [on]
BusyBox v1.19.4 (2013-01-19 12:07:48 CET) multi-call binary.
Usage: nice [-n ADJUST] [PROG ARGS]
Change scheduling priority, run PROG
-n ADJUST Adjust priority by ADJUST
19 2013-03-11 21:41:30
Odp: Dźwięk 5.1/Stereo alsa (9 odpowiedzi, napisanych Oprogramowanie / Software)
No ok tylko że to jest od sterowania glośnościa
mpd ładuje PCM, 0
a chciałbym żeby dawał na Speaker, 0
20 2013-03-11 13:15:11
Odp: Dźwięk 5.1/Stereo alsa (9 odpowiedzi, napisanych Oprogramowanie / Software)
Możesz mi podpowiedzieć co to za parametr by miał być? Nie ogarniam alsy w ogóle.
Co z plikiem .asoundrc gdzie go wrzucić w openwrt?
21 2013-03-10 22:49:56
Temat: Dźwięk 5.1/Stereo alsa (9 odpowiedzi, napisanych Oprogramowanie / Software)
Witam
Obecnie mam podłączoną kartę 5.1 grają tylko głośniki przód, chcę aby na satelitach leciała kopia przodu przy mp3 Jak się za to zabrać szukam różnych poradników nic nie pomaga ...
Jak zrobić restart alsy bez reboota router?
Czy da się ustawić dźwięk alsy po reboocie np na 30%?
root@Router:~# alsa
-ash: alsa: not found
root@Router:~# amixer
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch pswitch-joined penum
Playback channels: Front Left - Front Right - Rear Left - Rear Right - Front Center - Woofer - Side Left - Side Right
Limits: Playback 0 - 197
Mono:
Front Left: Playback 30 [15%] [-31.31dB] [on]
Front Right: Playback 30 [15%] [-31.31dB] [on]
Rear Left: Playback 30 [15%] [-31.31dB] [on]
Rear Right: Playback 30 [15%] [-31.31dB] [on]
Front Center: Playback 30 [15%] [-31.31dB] [on]
Woofer: Playback 30 [15%] [-31.31dB] [on]
Side Left: Playback 30 [15%] [-31.31dB] [on]
Side Right: Playback 30 [15%] [-31.31dB] [on]
Simple mixer control 'PCM',0
Capabilities: cvolume cswitch cswitch-joined penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 6928
Front Left: Capture 40 [1%] [-15.85dB] [on]
Front Right: Capture 40 [1%] [-15.85dB] [on]
Simple mixer control 'PCM Capture Source',0
Capabilities: enum
Items: 'Mic' 'Line' 'IEC958 In' 'Mixer'
Item0: 'Mic'
Simple mixer control 'Line',0
Capabilities: pvolume cvolume pswitch pswitch-joined cswitch cswitch-joined penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 8065 Capture 0 - 6928
Front Left: Playback 6144 [76%] [0.01dB] [off] Capture 4096 [59%] [0.01dB] [on]
Front Right: Playback 6144 [76%] [0.01dB] [off] Capture 4096 [59%] [0.01dB] [on]
Simple mixer control 'Mic',0
Capabilities: pvolume cvolume pswitch pswitch-joined cswitch cswitch-joined penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 8065 Capture 0 - 6928
Front Left: Playback 6144 [76%] [0.01dB] [off] Capture 4096 [59%] [0.01dB] [on]
Front Right: Playback 6144 [76%] [0.01dB] [off] Capture 4096 [59%] [0.01dB] [on]
Simple mixer control 'IEC958 In',0
Capabilities: cswitch cswitch-joined penum
Capture channels: Mono
Mono: Capture [on]
pcm!default {
type hw
card 0
slave.pcm "dmix"
slave.channels 6
route_policy duplicate
}
ctl.!default {
type hw
card 0
}22 2013-03-04 11:39:43
Odp: USB Audio - mpd nie startuje (4 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
/etc/init.d/mpd enable
A co jeśli to nie pomoże?
23 2013-03-04 11:37:26
Odp: Buczenie głośników i connection refused (3 odpowiedzi, napisanych Oprogramowanie / Software)
Dzięki za odpowiedź. Zdążyłeś też odpowiedzieć na post, który usunąłem, ponieważ przy wklejaniu zobaczyłem błędy, z którymi się uporałem.
Na razie musi zostać buczenie tak jak jest przy podkręceniu głośności na połowę nie słychać.
Pozostało mi brak startu na początku mpd pomimo włączenia enable i zmuszenie alsa do grania 5.1 może być stereo. Ale to będę szukał w innych wątkach.
24 2013-03-02 00:13:30
Temat: Buczenie głośników i connection refused (3 odpowiedzi, napisanych Oprogramowanie / Software)
Witam
Przede wszystkim wielkie dzięki dla Cezarego i innych użytkowników tego bardzo pomocnego forum.
OpenWRT dopiero poznaję, ale już jestem oczarowany możliwościami małego białego routerka.
Szukałem tylko czegoś żeby podpiąć modem GSM, a tu taka niespodzianka
Dzięki wam ustawiłem na TL-WR842ND OpenWrt z dyskami i takimi tam.
Wszystko ładnie chodzi, no prawie wszystko...
Podłączyłem kartę muzyczną mpd ładnie gra, ale na głośniki przechodzi buczenie jak jest włączony HDD.
Najmocniej słychać to na wyciszonych głośnikach. Coś wyczytałem o "pętli masy", ale kompletnie nie wiem jak się za to zabrać.
Druga sprawa, to zdarza się tak że router działa, rozdaje sieć ale nie można się do niego zalogować ani przez http ani SSH.
Od czego zacząć poszukiwania?
Pozdrawiam
Kamil
Znalezione posty: 24
Strony 1
eko.one.pl → Posty przez bass
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc