1 Temat przez bass (edytowany przez bass 2015-04-26 10:47:11)

  • bass
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-02-17
  • Posty: 26

Temat: Problem z drukarką Barrier Breaker

Witam,

Mam router wr842nd v2 z podpiętym aktywnym hubem. Do huba modem 3g oraz stara drukarka HP deskjet 3600.

Modem ładnie chodzi, ale z drukarką mam problem.

Logi

Fri Apr 24 11:01:55 2015 kern.info kernel: [   16.600000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Fri Apr 24 11:01:55 2015 kern.info kernel: [   16.600000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Fri Apr 24 11:01:55 2015 kern.info kernel: [   16.610000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Fri Apr 24 11:01:55 2015 kern.info kernel: [   16.720000] u32 classifier
Fri Apr 24 11:01:55 2015 kern.info kernel: [   16.730000]     input device check on
Fri Apr 24 11:01:55 2015 kern.info kernel: [   16.730000]     Actions configured
Fri Apr 24 11:01:55 2015 kern.info kernel: [   16.740000] Mirror/redirect action on
Fri Apr 24 11:01:55 2015 kern.info kernel: [   16.760000] fuse init (API version 7.22)
Fri Apr 24 11:01:55 2015 kern.info kernel: [   16.840000] usbcore: registered new interface driver cdc_acm
Fri Apr 24 11:01:55 2015 kern.info kernel: [   16.850000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Fri Apr 24 11:01:55 2015 kern.info kernel: [   16.860000] usbcore: registered new interface driver cdc_wdm
Fri Apr 24 11:01:55 2015 kern.info kernel: [   16.870000] ip_tables: (C) 2000-2006 Netfilter Core Team
Fri Apr 24 11:01:55 2015 kern.info kernel: [   16.950000] usblp 1-1.1:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7204
Fri Apr 24 11:01:55 2015 kern.info kernel: [   16.960000] usbcore: registered new interface driver usblp
Fri Apr 24 11:01:55 2015 kern.info kernel: [   16.990000] usbcore: registered new interface driver usbserial
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.010000] usbcore: registered new interface driver usbserial_generic
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.010000] usbserial: USB Serial support registered for generic
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.120000] xt_time: kernel timezone is -0000
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.140000] usbcore: registered new interface driver cdc_ether
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.160000] usbcore: registered new interface driver cdc_ncm
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.180000] usb 1-1.4: MAC-Address: 00:1e:10:1f:00:00
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.180000] huawei_cdc_ncm 1-1.4:1.2: cdc-wdm0: USB WDM device
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.200000] huawei_cdc_ncm 1-1.4:1.2 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform-1.4, Huawei CDC NCM device, 00:1e:10:1f:00:00
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.210000] usbcore: registered new interface driver huawei_cdc_ncm
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.250000] PPP generic driver version 2.4.2
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.250000] PPP MPPE Compression module registered
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.270000] NET: Registered protocol family 24
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.270000] PPTP driver version 0.8.5
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.290000] usbcore: registered new interface driver qmi_wwan
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.310000] usbcore: registered new interface driver rndis_host
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.320000] usbcore: registered new interface driver sierra
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.320000] usbserial: USB Serial support registered for Sierra USB modem
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.340000] usbcore: registered new interface driver sierra_net
Fri Apr 24 11:01:55 2015 kern.debug kernel: [   17.400000] ath: EEPROM regdomain: 0x0
Fri Apr 24 11:01:55 2015 kern.debug kernel: [   17.400000] ath: EEPROM indicates default country code should be used
Fri Apr 24 11:01:55 2015 kern.debug kernel: [   17.400000] ath: doing EEPROM country->regdmn map search
Fri Apr 24 11:01:55 2015 kern.debug kernel: [   17.400000] ath: country maps to regdmn code: 0x3a
Fri Apr 24 11:01:55 2015 kern.debug kernel: [   17.400000] ath: Country alpha2 being used: US
Fri Apr 24 11:01:55 2015 kern.debug kernel: [   17.400000] ath: Regpair used: 0x3a
Fri Apr 24 11:01:55 2015 kern.debug kernel: [   17.420000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.420000] cfg80211: Calling CRDA for country: US
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.430000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.440000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.450000] cfg80211: Regulatory domain changed to country: US
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.450000] cfg80211:  DFS Master region: FCC
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.460000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.470000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.480000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.480000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.490000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.500000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.520000] usbcore: registered new interface driver option
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.520000] usbserial: USB Serial support registered for GSM modem (1-port)
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.530000] option 1-1.4:1.0: GSM modem (1-port) converter detected
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.560000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.560000] option 1-1.4:1.1: GSM modem (1-port) converter detected
Fri Apr 24 11:01:55 2015 kern.info kernel: [   17.570000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
Fri Apr 24 11:01:59 2015 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Fri Apr 24 11:01:59 2015 user.err syslog: /dev/mtdblock3 is already mounted
Fri Apr 24 11:01:59 2015 user.emerg syslog: block: /dev/mtdblock3 is already mounted
Fri Apr 24 11:02:00 2015 authpriv.info dropbear[1325]: Not backgrounding
Fri Apr 24 11:02:00 2015 authpriv.warn dropbear[1326]: Failed listening on '22': Error listening: Address already in use
Fri Apr 24 11:02:00 2015 authpriv.info dropbear[1326]: Early exit: No listening ports available.
Fri Apr 24 11:02:01 2015 lpr.err p9100d[1339]: bind: Cannot assign requested address
Fri Apr 24 11:02:01 2015 lpr.err p9100d[1339]: accept: Bad file descriptor
Fri Apr 24 11:02:02 2015 user.err syslog: module is already loaded - xt_multiport
Fri Apr 24 11:02:02 2015 user.err syslog: module is already loaded - xt_comment
Fri Apr 24 11:02:02 2015 user.err syslog: module is already loaded - xt_length
Fri Apr 24 11:02:04 2015 user.err syslog: module is already loaded - xt_multiport
Fri Apr 24 11:02:04 2015 user.err syslog: module is already loaded - xt_comment
Fri Apr 24 11:02:04 2015 user.err syslog: module is already loaded - xt_length
Fri Apr 24 11:02:06 2015 kern.info kernel: [   30.950000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Fri Apr 24 11:02:06 2015 kern.info kernel: [   30.950000] device eth1 entered promiscuous mode
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'lan' is enabled
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'lan' is setting up now
Fri Apr 24 11:02:06 2015 kern.info kernel: [   30.980000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'lan' is now up
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'loopback' is enabled
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'loopback' is now up
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'tmobile' is setting up now
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'wan' is enabled
Fri Apr 24 11:02:06 2015 kern.info kernel: [   31.070000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Network device 'lo' link is up
Fri Apr 24 11:02:06 2015 daemon.notice netifd: Interface 'loopback' has link connectivity 
Fri Apr 24 11:02:07 2015 kern.info kernel: [   32.330000] cfg80211: Calling CRDA for country: PL
Fri Apr 24 11:02:07 2015 kern.info kernel: [   32.370000] cfg80211: Regulatory domain changed to country: PL
Fri Apr 24 11:02:07 2015 kern.info kernel: [   32.370000] cfg80211:  DFS Master region: ETSI
Fri Apr 24 11:02:07 2015 kern.info kernel: [   32.380000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Fri Apr 24 11:02:07 2015 kern.info kernel: [   32.390000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Fri Apr 24 11:02:07 2015 kern.info kernel: [   32.390000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Fri Apr 24 11:02:07 2015 kern.info kernel: [   32.400000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
Fri Apr 24 11:02:07 2015 kern.info kernel: [   32.410000] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
Fri Apr 24 11:02:07 2015 kern.info kernel: [   32.420000] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Fri Apr 24 11:02:08 2015 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Apr 24 11:02:08 2015 kern.err kernel: [   33.240000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:02:09 2015 daemon.crit xl2tpd[1729]: setsockopt recvref[30]: Protocol not available
Fri Apr 24 11:02:09 2015 daemon.info xl2tpd[1729]: Using l2tp kernel support.
Fri Apr 24 11:02:09 2015 daemon.info xl2tpd[1730]: xl2tpd version xl2tpd-1.3.6 started on OpenWrt PID:1730
Fri Apr 24 11:02:09 2015 daemon.info xl2tpd[1730]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc.
Fri Apr 24 11:02:09 2015 daemon.info xl2tpd[1730]: Forked by Scott Balmos and David Stipp, (C) 2001
Fri Apr 24 11:02:09 2015 daemon.info xl2tpd[1730]: Inherited by Jeff McAdams, (C) 2002
Fri Apr 24 11:02:09 2015 daemon.info xl2tpd[1730]: Forked again by Xelerance (www.xelerance.com) (C) 2006
Fri Apr 24 11:02:09 2015 daemon.info xl2tpd[1730]: Listening on IP address 0.0.0.0, port 1701
Fri Apr 24 11:02:09 2015 daemon.notice netifd: tmobile (1594): Trying to set mode
Fri Apr 24 11:02:10 2015 kern.info kernel: [   35.140000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Fri Apr 24 11:02:10 2015 kern.info kernel: [   35.250000] device wlan0 entered promiscuous mode
Fri Apr 24 11:02:10 2015 kern.err kernel: [   35.750000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:02:11 2015 user.emerg syslog: setting up led WAN
Fri Apr 24 11:02:11 2015 user.emerg syslog: setting up led LAN1
Fri Apr 24 11:02:11 2015 user.emerg syslog: setting up led LAN2
Fri Apr 24 11:02:11 2015 user.emerg syslog: setting up led LAN3
Fri Apr 24 11:02:11 2015 user.emerg syslog: setting up led LAN4
Fri Apr 24 11:02:11 2015 user.emerg syslog: setting up led WLAN
Fri Apr 24 11:02:11 2015 user.emerg syslog: setting up led USB
Fri Apr 24 11:02:11 2015 daemon.notice pppd[1791]: pppd 2.4.7 started by root, uid 0
Fri Apr 24 11:02:11 2015 kern.info kernel: [   36.690000] br-lan: port 2(wlan0) entered forwarding state
Fri Apr 24 11:02:11 2015 kern.info kernel: [   36.690000] br-lan: port 2(wlan0) entered forwarding state
Fri Apr 24 11:02:11 2015 kern.info kernel: [   36.700000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Fri Apr 24 11:02:11 2015 daemon.notice netifd: Bridge 'br-lan' link is up
Fri Apr 24 11:02:11 2015 daemon.notice netifd: Interface 'lan' has link connectivity 
Fri Apr 24 11:02:11 2015 kern.info kernel: [   36.730000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Fri Apr 24 11:02:12 2015 user.emerg syslog: - init complete -
Fri Apr 24 11:02:12 2015 daemon.notice netifd: Network device 'wlan0' link is up
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: abort on (BUSY)
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: abort on (NO CARRIER)
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: abort on (ERROR)
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: report (CONNECT)
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: timeout set to 10 seconds
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: send (AT&F^M)
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: expect (OK)
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: AT&F^M^M
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: OK
Fri Apr 24 11:02:12 2015 local2.info chat[1853]:  -- got it
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: send (ATE1^M)
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: expect (OK)
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: ^M
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: ATE1^M^M
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: OK
Fri Apr 24 11:02:12 2015 local2.info chat[1853]:  -- got it
Fri Apr 24 11:02:12 2015 local2.info chat[1853]: send (AT+CGDCONT=1,"IP","internet"^M)
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: timeout set to 30 seconds
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: expect (OK)
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: ^M
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: AT+CGDCONT=1,"IP","internet"^M^M
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: OK
Fri Apr 24 11:02:13 2015 local2.info chat[1853]:  -- got it
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: send (ATD*99***1#^M)
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: expect (CONNECT)
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: ^M
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: ATD*99***1#^M^M
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: CONNECT
Fri Apr 24 11:02:13 2015 local2.info chat[1853]:  -- got it
Fri Apr 24 11:02:13 2015 local2.info chat[1853]: send ( ^M)
Fri Apr 24 11:02:13 2015 daemon.info pppd[1791]: Serial connection established.
Fri Apr 24 11:02:13 2015 daemon.info pppd[1791]: Using interface 3g-tmobile
Fri Apr 24 11:02:13 2015 daemon.notice pppd[1791]: Connect: 3g-tmobile <--> /dev/ttyUSB1
Fri Apr 24 11:02:13 2015 kern.info kernel: [   38.690000] br-lan: port 2(wlan0) entered forwarding state
Fri Apr 24 11:02:15 2015 daemon.info dnsmasq[1890]: started, version 2.71 cachesize 150
Fri Apr 24 11:02:15 2015 daemon.info dnsmasq[1890]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Fri Apr 24 11:02:15 2015 daemon.info dnsmasq-dhcp[1890]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Fri Apr 24 11:02:15 2015 daemon.info dnsmasq[1890]: using local addresses only for domain lan
Fri Apr 24 11:02:15 2015 daemon.warn dnsmasq[1890]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Apr 24 11:02:15 2015 daemon.info dnsmasq[1890]: read /etc/hosts - 1 addresses
Fri Apr 24 11:02:15 2015 daemon.info dnsmasq[1890]: read /tmp/hosts/dhcp - 1 addresses
Fri Apr 24 11:02:15 2015 daemon.info dnsmasq-dhcp[1890]: read /etc/ethers - 0 addresses
Fri Apr 24 11:02:16 2015 user.notice upnp daemon: external interface not found, not starting
Fri Apr 24 11:02:16 2015 daemon.warn pppd[1791]: Could not determine remote IP address: defaulting to 10.64.64.64
Fri Apr 24 11:02:16 2015 daemon.notice pppd[1791]: local  IP address 100.118.189.34
Fri Apr 24 11:02:16 2015 daemon.notice pppd[1791]: remote IP address 10.64.64.64
Fri Apr 24 11:02:16 2015 daemon.notice pppd[1791]: primary   DNS address 213.158.199.1
Fri Apr 24 11:02:16 2015 daemon.notice pppd[1791]: secondary DNS address 213.158.199.5
Fri Apr 24 11:02:16 2015 daemon.notice netifd: Network device '3g-tmobile' link is up
Fri Apr 24 11:02:16 2015 daemon.notice netifd: Interface 'tmobile' is now up
Fri Apr 24 11:02:18 2015 user.notice firewall: Reloading firewall due to ifup of tmobile (3g-tmobile)
Fri Apr 24 11:02:18 2015 daemon.info dnsmasq[1890]: reading /tmp/resolv.conf.auto
Fri Apr 24 11:02:18 2015 daemon.info dnsmasq[1890]: using local addresses only for domain lan
Fri Apr 24 11:02:18 2015 daemon.info dnsmasq[1890]: using nameserver 213.158.199.1#53
Fri Apr 24 11:02:18 2015 daemon.info dnsmasq[1890]: using nameserver 213.158.199.5#53
Fri Apr 24 11:02:20 2015 daemon.err miniupnpd[2156]: could not open lease file: /var/upnp.leases
Fri Apr 24 11:02:20 2015 daemon.err miniupnpd[2156]: Why did you run me anyway?
Sun Apr 26 11:34:07 2015 daemon.info pppd[1791]: System time change detected.
Sun Apr 26 11:34:35 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: authenticated
Sun Apr 26 11:34:35 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: associated (aid 1)
Sun Apr 26 11:34:35 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df WPA: pairwise key handshake completed (RSN)
Sun Apr 26 11:34:35 2015 daemon.info dnsmasq-dhcp[1890]: DHCPREQUEST(br-lan) 192.168.1.115 a4:17:31:19:3d:df 
Sun Apr 26 11:34:35 2015 daemon.info dnsmasq-dhcp[1890]: DHCPACK(br-lan) 192.168.1.115 a4:17:31:19:3d:df laptop-agi
Sun Apr 26 11:34:36 2015 daemon.warn odhcpd[1274]: DHCPV6 CONFIRM IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: not on-link 
Sun Apr 26 11:34:36 2015 daemon.info dnsmasq[1890]: read /etc/hosts - 1 addresses
Sun Apr 26 11:34:36 2015 daemon.info dnsmasq[1890]: read /tmp/hosts/odhcpd - 0 addresses
Sun Apr 26 11:34:36 2015 daemon.info dnsmasq[1890]: read /tmp/hosts/dhcp - 1 addresses
Sun Apr 26 11:34:36 2015 daemon.info dnsmasq-dhcp[1890]: read /etc/ethers - 0 addresses
Sun Apr 26 11:34:37 2015 daemon.warn odhcpd[1274]: DHCPV6 CONFIRM IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: not on-link 
Sun Apr 26 11:34:37 2015 daemon.warn odhcpd[1274]: DHCPV6 SOLICIT IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: ok fd53:a2bb:741c::637/128 
Sun Apr 26 11:34:38 2015 daemon.warn odhcpd[1274]: DHCPV6 REQUEST IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: ok fd53:a2bb:741c::637/128 
Sun Apr 26 11:34:38 2015 daemon.info dnsmasq[1890]: read /etc/hosts - 1 addresses
Sun Apr 26 11:34:38 2015 daemon.info dnsmasq[1890]: read /tmp/hosts/odhcpd - 1 addresses
Sun Apr 26 11:34:38 2015 daemon.info dnsmasq[1890]: read /tmp/hosts/dhcp - 1 addresses
Sun Apr 26 11:34:38 2015 daemon.info dnsmasq-dhcp[1890]: read /etc/ethers - 0 addresses
[    0.000000] Linux version 3.10.49 (cezary@eko.one.pl) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #9 Sat Mar 28 08:55:37 CET 2015
[    0.000000] MyLoader: sysp=9926862e, boardp=5f2bfe0e, parts=75c0efe4
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001974c (MIPS 74Kc)
[    0.000000] SoC: Atheros AR9341 rev 3
[    0.000000] Clocks: CPU:535.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 80338b60, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=TL-WR842N-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 28588k/32768k available (2386k kernel code, 4180k reserved, 620k data, 256k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.070000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.100000] MIPS: machine is TP-LINK TL-WR842N/ND v2
[    0.520000] bio: create slab <bio-0> at 0
[    0.520000] Switching to clocksource MIPS
[    0.530000] NET: Registered protocol family 2
[    0.530000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.540000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.550000] TCP: Hash tables configured (established 512 bind 512)
[    0.550000] TCP: reno registered
[    0.560000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.560000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.570000] NET: Registered protocol family 1
[    0.570000] PCI: CLS 0 bytes, default 32
[    0.590000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.600000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.610000] msgmni has been set to 55
[    0.610000] io scheduler noop registered
[    0.610000] io scheduler deadline registered (default)
[    0.620000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.650000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[    0.660000] console [ttyS0] enabled, bootconsole disabled
[    0.670000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[    0.680000] m25p80 spi0.0: found s25fl064k, expected m25p80
[    0.690000] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[    0.690000] 5 tp-link partitions found on MTD device spi0.0
[    0.700000] Creating 5 MTD partitions on "spi0.0":
[    0.700000] 0x000000000000-0x000000020000 : "u-boot"
[    0.710000] 0x000000020000-0x0000001303d8 : "kernel"
[    0.710000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.730000] 0x0000001303d8-0x0000007f0000 : "rootfs"
[    0.730000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.750000] mtd: device 2 (rootfs) set to be root filesystem
[    0.760000] 1 squashfs-split partitions found on MTD device rootfs
[    0.760000] 0x000000670000-0x0000007f0000 : "rootfs_data"
[    0.770000] 0x0000007f0000-0x000000800000 : "art"
[    0.780000] 0x000000020000-0x0000007f0000 : "firmware"
[    0.800000] libphy: ag71xx_mdio: probed
[    1.350000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
[    1.370000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.920000] ag71xx-mdio.1: Found an AR934X built-in switch
[    2.960000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    2.970000] TCP: cubic registered
[    2.970000] NET: Registered protocol family 17
[    2.980000] Bridge firewalling registered
[    2.980000] 8021q: 802.1Q VLAN Support v1.8
[    2.990000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    3.000000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    3.010000] Freeing unused kernel memory: 256K (80350000 - 80390000)
[    6.440000] usbcore: registered new interface driver usbfs
[    6.450000] usbcore: registered new interface driver hub
[    6.450000] usbcore: registered new device driver usb
[    6.500000] SCSI subsystem initialized
[    6.510000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.520000] ehci-platform: EHCI generic platform driver
[    6.530000] ehci-platform ehci-platform: EHCI Host Controller
[    6.530000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    6.540000] ehci-platform ehci-platform: TX-TX IDP fix enabled
[    6.550000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    6.580000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    6.580000] hub 1-0:1.0: USB hub found
[    6.590000] hub 1-0:1.0: 1 port detected
[    6.590000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.610000] usbcore: registered new interface driver usb-storage
[    7.030000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    7.390000] hub 1-1:1.0: USB hub found
[    7.390000] hub 1-1:1.0: 4 ports detected
[    7.680000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
[    7.870000] usb 1-1.4: new high-speed USB device number 4 using ehci-platform
[    7.980000] usb-storage 1-1.4:1.3: USB Mass Storage device detected
[    7.990000] scsi0 : usb-storage 1-1.4:1.3
[    7.990000] usb-storage 1-1.4:1.4: USB Mass Storage device detected
[    8.000000] scsi1 : usb-storage 1-1.4:1.4
[    8.990000] scsi 0:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[    9.010000] scsi 1:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
[    9.020000] sd 1:0:0:0: [sda] Attached SCSI removable disk
[   12.190000] jffs2: notice: (398) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 33 of xref (0 dead, 9 orphan) found.
[   12.210000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   12.210000] block: unable to load configuration (fstab: Entry not found)
[   12.220000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[   12.230000] block: extroot: not configured
[   12.280000] jffs2: notice: (395) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 33 of xref (0 dead, 9 orphan) found.
[   12.510000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   12.520000] block: unable to load configuration (fstab: Entry not found)
[   12.530000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[   12.540000] block: extroot: not configured
[   16.340000] NET: Registered protocol family 10
[   16.370000] l2tp_core: L2TP core driver, V2.0
[   16.380000] l2tp_netlink: L2TP netlink interface
[   16.400000] gre: GRE over IPv4 demultiplexor driver
[   16.420000] ip_gre: GRE over IPv4 tunneling driver
[   16.440000] nf_conntrack version 0.5.0 (450 buckets, 1800 max)
[   16.460000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   16.490000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[   16.500000] Backport generated by backports.git backports-20140320-37-g5c33da0
[   16.530000] cfg80211: Calling CRDA to update world regulatory domain
[   16.530000] cfg80211: World regulatory domain updated:
[   16.540000] cfg80211:  DFS Master region: unset
[   16.540000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   16.550000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   16.560000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   16.570000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   16.580000] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[   16.590000] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   16.600000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   16.600000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   16.610000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   16.720000] u32 classifier
[   16.730000]     input device check on
[   16.730000]     Actions configured
[   16.740000] Mirror/redirect action on
[   16.760000] fuse init (API version 7.22)
[   16.840000] usbcore: registered new interface driver cdc_acm
[   16.850000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   16.860000] usbcore: registered new interface driver cdc_wdm
[   16.870000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   16.950000] usblp 1-1.1:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7204
[   16.960000] usbcore: registered new interface driver usblp
[   16.990000] usbcore: registered new interface driver usbserial
[   17.010000] usbcore: registered new interface driver usbserial_generic
[   17.010000] usbserial: USB Serial support registered for generic
[   17.120000] xt_time: kernel timezone is -0000
[   17.140000] usbcore: registered new interface driver cdc_ether
[   17.160000] usbcore: registered new interface driver cdc_ncm
[   17.180000] usb 1-1.4: MAC-Address: 00:1e:10:1f:00:00
[   17.180000] huawei_cdc_ncm 1-1.4:1.2: cdc-wdm0: USB WDM device
[   17.200000] huawei_cdc_ncm 1-1.4:1.2 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform-1.4, Huawei CDC NCM device, 00:1e:10:1f:00:00
[   17.210000] usbcore: registered new interface driver huawei_cdc_ncm
[   17.250000] PPP generic driver version 2.4.2
[   17.250000] PPP MPPE Compression module registered
[   17.270000] NET: Registered protocol family 24
[   17.270000] PPTP driver version 0.8.5
[   17.290000] usbcore: registered new interface driver qmi_wwan
[   17.310000] usbcore: registered new interface driver rndis_host
[   17.320000] usbcore: registered new interface driver sierra
[   17.320000] usbserial: USB Serial support registered for Sierra USB modem
[   17.340000] usbcore: registered new interface driver sierra_net
[   17.400000] ath: EEPROM regdomain: 0x0
[   17.400000] ath: EEPROM indicates default country code should be used
[   17.400000] ath: doing EEPROM country->regdmn map search
[   17.400000] ath: country maps to regdmn code: 0x3a
[   17.400000] ath: Country alpha2 being used: US
[   17.400000] ath: Regpair used: 0x3a
[   17.420000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   17.420000] cfg80211: Calling CRDA for country: US
[   17.430000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
[   17.440000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   17.450000] cfg80211: Regulatory domain changed to country: US
[   17.450000] cfg80211:  DFS Master region: FCC
[   17.460000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   17.470000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   17.480000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[   17.480000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[   17.490000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   17.500000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   17.520000] usbcore: registered new interface driver option
[   17.520000] usbserial: USB Serial support registered for GSM modem (1-port)
[   17.530000] option 1-1.4:1.0: GSM modem (1-port) converter detected
[   17.560000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
[   17.560000] option 1-1.4:1.1: GSM modem (1-port) converter detected
[   17.570000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
[   30.950000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   30.950000] device eth1 entered promiscuous mode
[   30.980000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   31.070000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   32.330000] cfg80211: Calling CRDA for country: PL
[   32.370000] cfg80211: Regulatory domain changed to country: PL
[   32.370000] cfg80211:  DFS Master region: ETSI
[   32.380000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   32.390000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   32.390000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   32.400000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
[   32.410000] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
[   32.420000] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   33.240000] option1 ttyUSB1: option_instat_callback: error -2
[   35.140000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   35.250000] device wlan0 entered promiscuous mode
[   35.750000] option1 ttyUSB1: option_instat_callback: error -2
[   36.690000] br-lan: port 2(wlan0) entered forwarding state
[   36.690000] br-lan: port 2(wlan0) entered forwarding state
[   36.700000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   36.730000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   38.690000] br-lan: port 2(wlan0) entered forwarding state

Konfiguracja drukarki w LUCI
/dev/usb/lp0
interfejs LAN
port 9100

i niestety nie udaje mi się jej zainstalować pod windows 8.1.

Poproszę o podpowiedzi.

2 Odpowiedź przez mar_w

  • mar_w
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-08-16
  • Posty: 2,124

Odp: Problem z drukarką Barrier Breaker

A czytałeś poradnik Printserwer?
Częstym błędem w Windowsie jest wskazywanie drukarki jako sieciowej, a w tym przypadku trzeba wskazać jako lokalną. Pokaż więcej co zrobiłeś dalej....

Xiaomi AX3000T @ Netgear R6220
* DVBT2 - T230C *

3 Odpowiedź przez bass

  • bass
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-02-17
  • Posty: 26

Odp: Problem z drukarką Barrier Breaker

Zrobiłem wg tej instrukcji niestety nie ma komunikacji z drukarką

Click on the Start button and select Devices and Printers.
Click on "Add a printer."
In the Add Printer dialog select "Add a local printer."
Select "Create a new port:" and set the type of port to "Standard TCP/IP Port". Then click Next.
In the "Hostname or IP address:" field enter the IP address of your router.
The "Port name:" field may be set to something you like.
De-select "Query the printer and automatically select the driver to use," then click next.
The computer will then attempt to detect the TCP/IP port. This will take some time and will most likely fail. Failing this step is not a problem.
On the "Additional port information required" page set the device type to Custom and click "Settings…"
Verify the Printer Name or IP Address. The Protocol should be set to "Raw" and the Raw Settings Port Number should be 9100. Leave LPR Settings and SNMP Status Enabled empty or de-selected. Then click OK.
Select the correct printer driver and click next. You may need to install drivers if they are not already available.
Finish the remaining printer installation wizard steps as needed. The printer should now be installed and working!

4 Odpowiedź przez mar_w

  • mar_w
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-08-16
  • Posty: 2,124

Odp: Problem z drukarką Barrier Breaker

Skoro wszystko dobrze zrobiłeś i nie działa to może powinieneś spróbować CUPS-a. Elegancki poradnik też jest.
Pakiet p910nd na pewno chodzi bardzo dobrze, bo u mnie Samsung tylko na nim śmiga, w odróżnieniu od CUPS-a, który wymaga dodatkowych plików, których nie ma. No cóż, takie życie. Jednemu chodzi to, a innemu tamto.

Xiaomi AX3000T @ Netgear R6220
* DVBT2 - T230C *

5 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,920

Odp: Problem z drukarką Barrier Breaker

PS? A drukarka nie potrzebuje firmware?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

6 Odpowiedź przez bass (edytowany przez bass 2015-04-29 07:34:49)

  • bass
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-02-17
  • Posty: 26

Odp: Problem z drukarką Barrier Breaker

Będę próbował CUPS'a. Z tym że wczoraj wyskoczył problem taki, że modem przestał się logować do sieci.

Poproszę o spojrzenie co nie tak jest. O co chodzi z tym option1 ttyUSB1: option_instat_callback: error -2

Fri Apr 24 11:02:08 2015 daemon.info xl2tpd[1620]: Listening on IP address 0.0.0.0, port 1701
Fri Apr 24 11:02:09 2015 kern.info kernel: [   35.310000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Fri Apr 24 11:02:09 2015 kern.info kernel: [   35.350000] device wlan0 entered promiscuous mode
Fri Apr 24 11:02:09 2015 kern.info kernel: [   35.350000] br-lan: port 2(wlan0) entered forwarding state
Fri Apr 24 11:02:09 2015 kern.info kernel: [   35.360000] br-lan: port 2(wlan0) entered forwarding state
Fri Apr 24 11:02:09 2015 kern.info kernel: [   35.530000] br-lan: port 2(wlan0) entered disabled state
Fri Apr 24 11:02:10 2015 user.emerg syslog: setting up led WAN
Fri Apr 24 11:02:10 2015 user.emerg syslog: setting up led LAN1
Fri Apr 24 11:02:10 2015 user.emerg syslog: setting up led LAN2
Fri Apr 24 11:02:10 2015 user.emerg syslog: setting up led LAN3
Fri Apr 24 11:02:10 2015 user.emerg syslog: setting up led LAN4
Fri Apr 24 11:02:10 2015 user.emerg syslog: setting up led WLAN
Fri Apr 24 11:02:10 2015 user.emerg syslog: setting up led USB
Fri Apr 24 11:02:10 2015 kern.info kernel: [   36.340000] br-lan: port 2(wlan0) entered forwarding state
Fri Apr 24 11:02:10 2015 kern.info kernel: [   36.340000] br-lan: port 2(wlan0) entered forwarding state
Fri Apr 24 11:02:10 2015 kern.info kernel: [   36.350000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Fri Apr 24 11:02:11 2015 daemon.notice netifd: Network device 'wlan0' link is up
Fri Apr 24 11:02:11 2015 user.emerg syslog: - init complete -
Fri Apr 24 11:02:12 2015 kern.info kernel: [   38.340000] br-lan: port 2(wlan0) entered forwarding state
Fri Apr 24 11:02:14 2015 daemon.info dnsmasq[1758]: started, version 2.71 cachesize 150
Fri Apr 24 11:02:14 2015 daemon.info dnsmasq[1758]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Fri Apr 24 11:02:14 2015 daemon.info dnsmasq-dhcp[1758]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Fri Apr 24 11:02:14 2015 daemon.info dnsmasq[1758]: using local addresses only for domain lan
Fri Apr 24 11:02:14 2015 daemon.warn dnsmasq[1758]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Apr 24 11:02:14 2015 daemon.info dnsmasq[1758]: read /etc/hosts - 1 addresses
Fri Apr 24 11:02:14 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/dhcp - 1 addresses
Fri Apr 24 11:02:14 2015 daemon.info dnsmasq-dhcp[1758]: read /etc/ethers - 0 addresses
Fri Apr 24 11:02:15 2015 user.notice upnp daemon: external interface not found, not starting
Fri Apr 24 11:02:41 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: authenticated
Fri Apr 24 11:02:41 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: associated (aid 1)
Fri Apr 24 11:02:41 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df WPA: pairwise key handshake completed (RSN)
Fri Apr 24 11:02:41 2015 daemon.info dnsmasq-dhcp[1758]: DHCPREQUEST(br-lan) 192.168.1.115 a4:17:31:19:3d:df 
Fri Apr 24 11:02:41 2015 daemon.info dnsmasq-dhcp[1758]: DHCPACK(br-lan) 192.168.1.115 a4:17:31:19:3d:df laptop-agi
Fri Apr 24 11:02:41 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: disassociated
Fri Apr 24 11:02:42 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Fri Apr 24 11:02:43 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: authenticated
Fri Apr 24 11:02:43 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: associated (aid 1)
Fri Apr 24 11:02:43 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df WPA: pairwise key handshake completed (RSN)
Fri Apr 24 11:02:43 2015 daemon.info dnsmasq-dhcp[1758]: DHCPREQUEST(br-lan) 192.168.1.115 a4:17:31:19:3d:df 
Fri Apr 24 11:02:43 2015 daemon.info dnsmasq-dhcp[1758]: DHCPACK(br-lan) 192.168.1.115 a4:17:31:19:3d:df laptop-agi
Fri Apr 24 11:02:44 2015 daemon.warn odhcpd[1173]: DHCPV6 CONFIRM IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: not on-link 
Fri Apr 24 11:02:44 2015 daemon.info dnsmasq[1758]: read /etc/hosts - 1 addresses
Fri Apr 24 11:02:44 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/odhcpd - 0 addresses
Fri Apr 24 11:02:44 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/dhcp - 1 addresses
Fri Apr 24 11:02:44 2015 daemon.info dnsmasq-dhcp[1758]: read /etc/ethers - 0 addresses
Fri Apr 24 11:02:45 2015 daemon.warn odhcpd[1173]: DHCPV6 CONFIRM IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: not on-link 
Fri Apr 24 11:02:45 2015 daemon.warn odhcpd[1173]: DHCPV6 SOLICIT IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: ok fd53:a2bb:741c::637/128 
Fri Apr 24 11:02:46 2015 daemon.warn odhcpd[1173]: DHCPV6 REQUEST IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: ok fd53:a2bb:741c::637/128 
Fri Apr 24 11:02:46 2015 daemon.info dnsmasq[1758]: read /etc/hosts - 1 addresses
Fri Apr 24 11:02:46 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/odhcpd - 1 addresses
Fri Apr 24 11:02:46 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/dhcp - 1 addresses
Fri Apr 24 11:02:46 2015 daemon.info dnsmasq-dhcp[1758]: read /etc/ethers - 0 addresses
Fri Apr 24 11:03:20 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: authenticated
Fri Apr 24 11:03:20 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df IEEE 802.11: associated (aid 1)
Fri Apr 24 11:03:20 2015 daemon.info hostapd: wlan0: STA a4:17:31:19:3d:df WPA: pairwise key handshake completed (RSN)
Fri Apr 24 11:03:20 2015 daemon.info dnsmasq-dhcp[1758]: DHCPREQUEST(br-lan) 192.168.1.115 a4:17:31:19:3d:df 
Fri Apr 24 11:03:20 2015 daemon.info dnsmasq-dhcp[1758]: DHCPACK(br-lan) 192.168.1.115 a4:17:31:19:3d:df laptop-agi
Fri Apr 24 11:03:21 2015 daemon.warn odhcpd[1173]: DHCPV6 CONFIRM IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: not on-link fd53:a2bb:741c::637/128 
Fri Apr 24 11:03:21 2015 daemon.warn odhcpd[1173]: DHCPV6 SOLICIT IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: ok fd53:a2bb:741c::637/128 
Fri Apr 24 11:03:21 2015 daemon.info dnsmasq[1758]: read /etc/hosts - 1 addresses
Fri Apr 24 11:03:21 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/odhcpd - 0 addresses
Fri Apr 24 11:03:21 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/dhcp - 1 addresses
Fri Apr 24 11:03:21 2015 daemon.info dnsmasq-dhcp[1758]: read /etc/ethers - 0 addresses
Fri Apr 24 11:03:22 2015 daemon.warn odhcpd[1173]: DHCPV6 REQUEST IA_NA from 0001000118532c3c7054d25bb5b8 on br-lan: ok fd53:a2bb:741c::637/128 
Fri Apr 24 11:03:22 2015 daemon.info dnsmasq[1758]: read /etc/hosts - 1 addresses
Fri Apr 24 11:03:22 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/odhcpd - 1 addresses
Fri Apr 24 11:03:22 2015 daemon.info dnsmasq[1758]: read /tmp/hosts/dhcp - 1 addresses
Fri Apr 24 11:03:22 2015 daemon.info dnsmasq-dhcp[1758]: read /etc/ethers - 0 addresses
Fri Apr 24 11:03:40 2015 kern.info kernel: [  125.850000] usb 1-1.4: new high-speed USB device number 3 using ehci-platform
Fri Apr 24 11:03:40 2015 kern.info kernel: [  125.970000] usb-storage 1-1.4:1.0: USB Mass Storage device detected
Fri Apr 24 11:03:40 2015 kern.info kernel: [  125.970000] scsi0 : usb-storage 1-1.4:1.0
Fri Apr 24 11:03:40 2015 kern.info kernel: [  126.380000] usb 1-1.4: USB disconnect, device number 3
Fri Apr 24 11:03:41 2015 kern.info kernel: [  126.870000] usb 1-1.4: new high-speed USB device number 4 using ehci-platform
Fri Apr 24 11:03:41 2015 kern.info kernel: [  126.990000] option 1-1.4:1.0: GSM modem (1-port) converter detected
Fri Apr 24 11:03:41 2015 kern.info kernel: [  127.000000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
Fri Apr 24 11:03:41 2015 kern.info kernel: [  127.000000] option 1-1.4:1.1: GSM modem (1-port) converter detected
Fri Apr 24 11:03:41 2015 kern.info kernel: [  127.020000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
Fri Apr 24 11:03:41 2015 kern.info kernel: [  127.030000] usb 1-1.4: MAC-Address: 00:1e:10:1f:00:00
Fri Apr 24 11:03:41 2015 kern.info kernel: [  127.050000] huawei_cdc_ncm 1-1.4:1.2: cdc-wdm0: USB WDM device
Fri Apr 24 11:03:41 2015 kern.info kernel: [  127.050000] huawei_cdc_ncm 1-1.4:1.2 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform-1.4, Huawei CDC NCM device, 00:1e:10:1f:00:00
Fri Apr 24 11:03:41 2015 kern.info kernel: [  127.070000] usb-storage 1-1.4:1.3: USB Mass Storage device detected
Fri Apr 24 11:03:41 2015 kern.info kernel: [  127.090000] scsi1 : usb-storage 1-1.4:1.3
Fri Apr 24 11:03:41 2015 kern.info kernel: [  127.090000] usb-storage 1-1.4:1.4: USB Mass Storage device detected
Fri Apr 24 11:03:41 2015 kern.info kernel: [  127.110000] scsi2 : usb-storage 1-1.4:1.4
Fri Apr 24 11:03:42 2015 daemon.notice netifd: Interface 'tmobile' is setting up now
Fri Apr 24 11:03:42 2015 kern.notice kernel: [  128.090000] scsi 1:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Fri Apr 24 11:03:42 2015 kern.notice kernel: [  128.110000] scsi 2:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
Fri Apr 24 11:03:42 2015 kern.notice kernel: [  128.150000] sd 2:0:0:0: [sda] Attached SCSI removable disk
Fri Apr 24 11:03:43 2015 user.err syslog: Unkown action change
Fri Apr 24 11:03:43 2015 user.err syslog: Unkown action change
Fri Apr 24 11:03:44 2015 kern.err kernel: [  130.070000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:44 2015 daemon.notice netifd: tmobile (2049): Trying to set mode
Fri Apr 24 11:03:45 2015 daemon.notice netifd: tmobile (2049): comgt 11:03:45 -> -- Error Report --
Fri Apr 24 11:03:45 2015 daemon.notice netifd: tmobile (2049): comgt 11:03:45 -> ---->                   ^
Fri Apr 24 11:03:45 2015 daemon.notice netifd: tmobile (2049): comgt 11:03:45 -> Error @163, line 10, Could not write to COM device. (1)
Fri Apr 24 11:03:45 2015 daemon.notice netifd: tmobile (2049): 
Fri Apr 24 11:03:45 2015 kern.err kernel: [  131.120000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:45 2015 daemon.notice pppd[2142]: pppd 2.4.7 started by root, uid 0
Fri Apr 24 11:03:46 2015 local2.info chat[2144]: abort on (BUSY)
Fri Apr 24 11:03:46 2015 local2.info chat[2144]: abort on (NO CARRIER)
Fri Apr 24 11:03:46 2015 local2.info chat[2144]: abort on (ERROR)
Fri Apr 24 11:03:46 2015 local2.info chat[2144]: report (CONNECT)
Fri Apr 24 11:03:46 2015 local2.info chat[2144]: timeout set to 10 seconds
Fri Apr 24 11:03:46 2015 local2.info chat[2144]: send (AT&F^M)
Fri Apr 24 11:03:46 2015 local2.info chat[2144]: expect (OK)
Fri Apr 24 11:03:47 2015 local2.info chat[2144]: AT&F^M^M
Fri Apr 24 11:03:47 2015 local2.info chat[2144]: +CME ERROR
Fri Apr 24 11:03:47 2015 local2.info chat[2144]:  -- failed
Fri Apr 24 11:03:47 2015 local2.info chat[2144]: Failed (ERROR)
Fri Apr 24 11:03:47 2015 daemon.err pppd[2142]: Connect script failed
Fri Apr 24 11:03:48 2015 kern.err kernel: [  133.840000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:48 2015 daemon.info pppd[2142]: Exit.
Fri Apr 24 11:03:48 2015 daemon.notice netifd: Interface 'tmobile' is now down
Fri Apr 24 11:03:48 2015 daemon.notice netifd: Interface 'tmobile' is setting up now
Fri Apr 24 11:03:49 2015 kern.err kernel: [  135.550000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:50 2015 daemon.notice netifd: tmobile (2150): Trying to set mode
Fri Apr 24 11:03:50 2015 daemon.notice netifd: tmobile (2150): comgt 11:03:50 -> -- Error Report --
Fri Apr 24 11:03:50 2015 daemon.notice netifd: tmobile (2150): comgt 11:03:50 -> ---->                   ^
Fri Apr 24 11:03:50 2015 daemon.notice netifd: tmobile (2150): comgt 11:03:50 -> Error @163, line 10, Could not write to COM device. (1)
Fri Apr 24 11:03:50 2015 daemon.notice netifd: tmobile (2150): 
Fri Apr 24 11:03:50 2015 kern.err kernel: [  136.610000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:51 2015 daemon.notice pppd[2165]: pppd 2.4.7 started by root, uid 0
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: abort on (BUSY)
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: abort on (NO CARRIER)
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: abort on (ERROR)
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: report (CONNECT)
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: timeout set to 10 seconds
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: send (AT&F^M)
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: expect (OK)
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: AT&F^M^M
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: +CME ERROR
Fri Apr 24 11:03:52 2015 local2.info chat[2167]:  -- failed
Fri Apr 24 11:03:52 2015 local2.info chat[2167]: Failed (ERROR)
Fri Apr 24 11:03:52 2015 daemon.err pppd[2165]: Connect script failed
Fri Apr 24 11:03:53 2015 kern.err kernel: [  139.200000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:53 2015 daemon.info pppd[2165]: Exit.
Fri Apr 24 11:03:53 2015 daemon.notice netifd: Interface 'tmobile' is now down
Fri Apr 24 11:03:53 2015 daemon.notice netifd: Interface 'tmobile' is setting up now
Fri Apr 24 11:03:55 2015 kern.err kernel: [  140.920000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:55 2015 daemon.notice netifd: tmobile (2173): Trying to set mode
Fri Apr 24 11:03:56 2015 daemon.notice netifd: tmobile (2173): comgt 11:03:56 -> -- Error Report --
Fri Apr 24 11:03:56 2015 daemon.notice netifd: tmobile (2173): comgt 11:03:56 -> ---->                   ^
Fri Apr 24 11:03:56 2015 daemon.notice netifd: tmobile (2173): comgt 11:03:56 -> Error @163, line 10, Could not write to COM device. (1)
Fri Apr 24 11:03:56 2015 daemon.notice netifd: tmobile (2173): 
Fri Apr 24 11:03:56 2015 kern.err kernel: [  141.930000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:56 2015 daemon.notice pppd[2191]: pppd 2.4.7 started by root, uid 0
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: abort on (BUSY)
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: abort on (NO CARRIER)
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: abort on (ERROR)
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: report (CONNECT)
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: timeout set to 10 seconds
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: send (AT&F^M)
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: expect (OK)
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: AT&F^M^M
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: +CME ERROR
Fri Apr 24 11:03:57 2015 local2.info chat[2193]:  -- failed
Fri Apr 24 11:03:57 2015 local2.info chat[2193]: Failed (ERROR)
Fri Apr 24 11:03:57 2015 daemon.err pppd[2191]: Connect script failed
Fri Apr 24 11:03:58 2015 kern.err kernel: [  144.520000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:03:58 2015 daemon.info pppd[2191]: Exit.
Fri Apr 24 11:03:58 2015 daemon.notice netifd: Interface 'tmobile' is now down
Fri Apr 24 11:03:58 2015 daemon.notice netifd: Interface 'tmobile' is setting up now
Fri Apr 24 11:04:00 2015 kern.err kernel: [  146.240000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:04:01 2015 daemon.notice netifd: tmobile (2199): Trying to set mode
Fri Apr 24 11:04:01 2015 daemon.notice netifd: tmobile (2199): comgt 11:04:01 -> -- Error Report --
Fri Apr 24 11:04:01 2015 daemon.notice netifd: tmobile (2199): comgt 11:04:01 -> ---->                   ^
Fri Apr 24 11:04:01 2015 daemon.notice netifd: tmobile (2199): comgt 11:04:01 -> Error @163, line 10, Could not write to COM device. (1)
Fri Apr 24 11:04:01 2015 daemon.notice netifd: tmobile (2199): 
Fri Apr 24 11:04:01 2015 kern.err kernel: [  147.300000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:04:01 2015 daemon.notice pppd[2214]: pppd 2.4.7 started by root, uid 0
Fri Apr 24 11:04:02 2015 local2.info chat[2216]: abort on (BUSY)
Fri Apr 24 11:04:02 2015 local2.info chat[2216]: abort on (NO CARRIER)
Fri Apr 24 11:04:02 2015 local2.info chat[2216]: abort on (ERROR)
Fri Apr 24 11:04:02 2015 local2.info chat[2216]: report (CONNECT)
Fri Apr 24 11:04:02 2015 local2.info chat[2216]: timeout set to 10 seconds
Fri Apr 24 11:04:02 2015 local2.info chat[2216]: send (AT&F^M)
Fri Apr 24 11:04:02 2015 local2.info chat[2216]: expect (OK)
Fri Apr 24 11:04:03 2015 local2.info chat[2216]: AT&F^M^M
Fri Apr 24 11:04:03 2015 local2.info chat[2216]: +CME ERROR
Fri Apr 24 11:04:03 2015 local2.info chat[2216]:  -- failed
Fri Apr 24 11:04:03 2015 local2.info chat[2216]: Failed (ERROR)
Fri Apr 24 11:04:03 2015 daemon.err pppd[2214]: Connect script failed
Fri Apr 24 11:04:04 2015 kern.err kernel: [  149.890000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:04:04 2015 daemon.info pppd[2214]: Exit.
Fri Apr 24 11:04:04 2015 daemon.notice netifd: Interface 'tmobile' is now down
Fri Apr 24 11:04:04 2015 daemon.notice netifd: Interface 'tmobile' is setting up now
Fri Apr 24 11:04:05 2015 kern.err kernel: [  151.610000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:04:06 2015 daemon.notice netifd: tmobile (2222): Trying to set mode
Fri Apr 24 11:04:06 2015 daemon.notice netifd: tmobile (2222): comgt 11:04:06 -> -- Error Report --
Fri Apr 24 11:04:06 2015 daemon.notice netifd: tmobile (2222): comgt 11:04:06 -> ---->                   ^
Fri Apr 24 11:04:06 2015 daemon.notice netifd: tmobile (2222): comgt 11:04:06 -> Error @163, line 10, Could not write to COM device. (1)
Fri Apr 24 11:04:06 2015 daemon.notice netifd: tmobile (2222): 
Fri Apr 24 11:04:06 2015 kern.err kernel: [  152.670000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:04:07 2015 daemon.notice pppd[2237]: pppd 2.4.7 started by root, uid 0
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: abort on (BUSY)
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: abort on (NO CARRIER)
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: abort on (ERROR)
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: report (CONNECT)
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: timeout set to 10 seconds
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: send (AT&F^M)
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: expect (OK)
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: AT&F^M^M
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: +CME ERROR
Fri Apr 24 11:04:08 2015 local2.info chat[2239]:  -- failed
Fri Apr 24 11:04:08 2015 local2.info chat[2239]: Failed (ERROR)
Fri Apr 24 11:04:08 2015 daemon.err pppd[2237]: Connect script failed
Fri Apr 24 11:04:09 2015 kern.err kernel: [  155.260000] option1 ttyUSB1: option_instat_callback: error -2
Fri Apr 24 11:04:09 2015 daemon.info pppd[2237]: Exit.
Fri Apr 24 11:04:09 2015 daemon.notice netifd: Interface 'tmobile' is now down
Fri Apr 24 11:04:09 2015 daemon.notice netifd: Interface 'tmobile' is setting up now
Fri Apr 24 11:04:11 2015 kern.err kernel: [  156.990000] option1 ttyUSB1: option_instat_callback: error -2
[    0.000000] Linux version 3.10.49 (cezary@eko.one.pl) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #9 Sat Mar 28 08:55:37 CET 2015
[    0.000000] MyLoader: sysp=9926862e, boardp=5f2bfe0e, parts=75c0efe4
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001974c (MIPS 74Kc)
[    0.000000] SoC: Atheros AR9341 rev 3
[    0.000000] Clocks: CPU:535.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 80338b60, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=TL-WR842N-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 28588k/32768k available (2386k kernel code, 4180k reserved, 620k data, 256k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.070000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.100000] MIPS: machine is TP-LINK TL-WR842N/ND v2
[    0.520000] bio: create slab <bio-0> at 0
[    0.520000] Switching to clocksource MIPS
[    0.530000] NET: Registered protocol family 2
[    0.530000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.540000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.550000] TCP: Hash tables configured (established 512 bind 512)
[    0.550000] TCP: reno registered
[    0.560000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.560000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.570000] NET: Registered protocol family 1
[    0.570000] PCI: CLS 0 bytes, default 32
[    0.590000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.600000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.610000] msgmni has been set to 55
[    0.610000] io scheduler noop registered
[    0.610000] io scheduler deadline registered (default)
[    0.620000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.650000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[    0.660000] console [ttyS0] enabled, bootconsole disabled
[    0.670000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[    0.680000] m25p80 spi0.0: found s25fl064k, expected m25p80
[    0.690000] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[    0.690000] 5 tp-link partitions found on MTD device spi0.0
[    0.700000] Creating 5 MTD partitions on "spi0.0":
[    0.700000] 0x000000000000-0x000000020000 : "u-boot"
[    0.710000] 0x000000020000-0x0000001303d8 : "kernel"
[    0.710000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.730000] 0x0000001303d8-0x0000007f0000 : "rootfs"
[    0.730000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.750000] mtd: device 2 (rootfs) set to be root filesystem
[    0.760000] 1 squashfs-split partitions found on MTD device rootfs
[    0.760000] 0x000000670000-0x0000007f0000 : "rootfs_data"
[    0.770000] 0x0000007f0000-0x000000800000 : "art"
[    0.780000] 0x000000020000-0x0000007f0000 : "firmware"
[    0.800000] libphy: ag71xx_mdio: probed
[    1.350000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
[    1.370000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.920000] ag71xx-mdio.1: Found an AR934X built-in switch
[    2.960000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    2.970000] TCP: cubic registered
[    2.970000] NET: Registered protocol family 17
[    2.980000] Bridge firewalling registered
[    2.980000] 8021q: 802.1Q VLAN Support v1.8
[    2.990000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    3.000000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    3.010000] Freeing unused kernel memory: 256K (80350000 - 80390000)
[    6.450000] usbcore: registered new interface driver usbfs
[    6.460000] usbcore: registered new interface driver hub
[    6.460000] usbcore: registered new device driver usb
[    6.510000] SCSI subsystem initialized
[    6.520000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.530000] ehci-platform: EHCI generic platform driver
[    6.540000] ehci-platform ehci-platform: EHCI Host Controller
[    6.540000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    6.550000] ehci-platform ehci-platform: TX-TX IDP fix enabled
[    6.560000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    6.590000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    6.590000] hub 1-0:1.0: USB hub found
[    6.600000] hub 1-0:1.0: 1 port detected
[    6.600000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.620000] usbcore: registered new interface driver usb-storage
[    7.040000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    7.400000] hub 1-1:1.0: USB hub found
[    7.400000] hub 1-1:1.0: 4 ports detected
[    9.130000] eth1: link up (1000Mbps/Full duplex)
[   12.190000] jffs2: notice: (372) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 33 of xref (0 dead, 9 orphan) found.
[   12.210000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   12.220000] block: unable to load configuration (fstab: Entry not found)
[   12.230000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[   12.240000] block: extroot: not configured
[   12.290000] jffs2: notice: (369) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 33 of xref (0 dead, 9 orphan) found.
[   12.510000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   12.530000] block: unable to load configuration (fstab: Entry not found)
[   12.530000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[   12.550000] block: extroot: not configured
[   12.580000] eth1: link down
[   16.870000] NET: Registered protocol family 10
[   16.900000] l2tp_core: L2TP core driver, V2.0
[   16.900000] l2tp_netlink: L2TP netlink interface
[   16.920000] gre: GRE over IPv4 demultiplexor driver
[   16.940000] ip_gre: GRE over IPv4 tunneling driver
[   16.950000] nf_conntrack version 0.5.0 (450 buckets, 1800 max)
[   16.970000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   17.000000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[   17.000000] Backport generated by backports.git backports-20140320-37-g5c33da0
[   17.090000] cfg80211: Calling CRDA to update world regulatory domain
[   17.090000] cfg80211: World regulatory domain updated:
[   17.100000] cfg80211:  DFS Master region: unset
[   17.100000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   17.110000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   17.120000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   17.130000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   17.140000] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[   17.150000] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   17.150000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   17.160000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   17.170000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   17.350000] u32 classifier
[   17.350000]     input device check on
[   17.360000]     Actions configured
[   17.360000] Mirror/redirect action on
[   17.390000] fuse init (API version 7.22)
[   17.450000] usbcore: registered new interface driver cdc_acm
[   17.460000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   17.470000] usbcore: registered new interface driver cdc_wdm
[   17.490000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.550000] usbcore: registered new interface driver usblp
[   17.580000] usbcore: registered new interface driver usbserial
[   17.610000] usbcore: registered new interface driver usbserial_generic
[   17.610000] usbserial: USB Serial support registered for generic
[   17.720000] xt_time: kernel timezone is -0000
[   17.770000] usbcore: registered new interface driver cdc_ether
[   17.790000] usbcore: registered new interface driver cdc_ncm
[   17.790000] usbcore: registered new interface driver huawei_cdc_ncm
[   17.830000] PPP generic driver version 2.4.2
[   17.830000] PPP MPPE Compression module registered
[   17.850000] NET: Registered protocol family 24
[   17.850000] PPTP driver version 0.8.5
[   17.870000] usbcore: registered new interface driver qmi_wwan
[   17.890000] usbcore: registered new interface driver rndis_host
[   17.900000] usbcore: registered new interface driver sierra
[   17.910000] usbserial: USB Serial support registered for Sierra USB modem
[   17.920000] usbcore: registered new interface driver sierra_net
[   17.950000] ath: EEPROM regdomain: 0x0
[   17.950000] ath: EEPROM indicates default country code should be used
[   17.950000] ath: doing EEPROM country->regdmn map search
[   17.950000] ath: country maps to regdmn code: 0x3a
[   17.950000] ath: Country alpha2 being used: US
[   17.950000] ath: Regpair used: 0x3a
[   17.970000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   17.970000] cfg80211: Calling CRDA for country: US
[   17.980000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
[   17.990000] cfg80211: Regulatory domain changed to country: US
[   17.990000] cfg80211:  DFS Master region: FCC
[   18.000000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   18.010000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   18.010000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[   18.020000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[   18.030000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   18.040000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   18.060000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   18.070000] usbcore: registered new interface driver option
[   18.090000] usbserial: USB Serial support registered for GSM modem (1-port)
[   31.320000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   31.320000] device eth1 entered promiscuous mode
[   31.340000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   31.360000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   32.020000] eth1: link up (1000Mbps/Full duplex)
[   32.020000] br-lan: port 1(eth1) entered forwarding state
[   32.030000] br-lan: port 1(eth1) entered forwarding state
[   32.030000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   32.060000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   32.600000] cfg80211: Calling CRDA for country: PL
[   32.610000] cfg80211: Regulatory domain changed to country: PL
[   32.620000] cfg80211:  DFS Master region: ETSI
[   32.620000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   32.630000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   32.640000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   32.650000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
[   32.660000] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
[   32.660000] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   34.030000] br-lan: port 1(eth1) entered forwarding state
[   35.310000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   35.350000] device wlan0 entered promiscuous mode
[   35.350000] br-lan: port 2(wlan0) entered forwarding state
[   35.360000] br-lan: port 2(wlan0) entered forwarding state
[   35.530000] br-lan: port 2(wlan0) entered disabled state
[   36.340000] br-lan: port 2(wlan0) entered forwarding state
[   36.340000] br-lan: port 2(wlan0) entered forwarding state
[   36.350000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   38.340000] br-lan: port 2(wlan0) entered forwarding state
[  125.850000] usb 1-1.4: new high-speed USB device number 3 using ehci-platform
[  125.970000] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[  125.970000] scsi0 : usb-storage 1-1.4:1.0
[  126.380000] usb 1-1.4: USB disconnect, device number 3
[  126.870000] usb 1-1.4: new high-speed USB device number 4 using ehci-platform
[  126.990000] option 1-1.4:1.0: GSM modem (1-port) converter detected
[  127.000000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
[  127.000000] option 1-1.4:1.1: GSM modem (1-port) converter detected
[  127.020000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
[  127.030000] usb 1-1.4: MAC-Address: 00:1e:10:1f:00:00
[  127.050000] huawei_cdc_ncm 1-1.4:1.2: cdc-wdm0: USB WDM device
[  127.050000] huawei_cdc_ncm 1-1.4:1.2 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform-1.4, Huawei CDC NCM device, 00:1e:10:1f:00:00
[  127.070000] usb-storage 1-1.4:1.3: USB Mass Storage device detected
[  127.090000] scsi1 : usb-storage 1-1.4:1.3
[  127.090000] usb-storage 1-1.4:1.4: USB Mass Storage device detected
[  127.110000] scsi2 : usb-storage 1-1.4:1.4
[  128.090000] scsi 1:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[  128.110000] scsi 2:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
[  128.150000] sd 2:0:0:0: [sda] Attached SCSI removable disk
[  130.070000] option1 ttyUSB1: option_instat_callback: error -2
[  131.120000] option1 ttyUSB1: option_instat_callback: error -2
[  133.840000] option1 ttyUSB1: option_instat_callback: error -2
[  135.550000] option1 ttyUSB1: option_instat_callback: error -2
[  136.610000] option1 ttyUSB1: option_instat_callback: error -2
[  139.200000] option1 ttyUSB1: option_instat_callback: error -2

7 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,920

Odp: Problem z drukarką Barrier Breaker

Modem Ci zawisł. Wyjmij go i podłącz jeszcze raz.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

8 Odpowiedź przez bass

  • bass
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-02-17
  • Posty: 26

Odp: Problem z drukarką Barrier Breaker

Cezary napisał/a:

Modem Ci zawisł. Wyjmij go i podłącz jeszcze raz.

Próbowałem. Niestety restarty i podłaczanie na nowo nic nie daje.