Hi guys, I wanted to ask for some information: what are the credentials to access the Nordic B14 system via the serial port? What are the login and password to enter the Nordic system?

Hey guys... Is it true that nordic b15 has been released?

Can you help me understand how to redo via JTAG? Any additional suggestions, like the chip or things like that?

I installed flash_erase from the nand-utils package and formatted mtd0, which gave an error: "skip bad block." I installed OpenWrt multiple times, and occasionally it would load the firmware or kernel immediately, while OpenWrt sysupgrade would block it multiple times before starting. Only some versions worked. In the end, it stopped giving me any response from uBoot. Pressing ESC no longer stops anything. If you have any additional suggestions, let me know. By the way, I’m selling the modem module with the original IMEI on eBay.

Hi guys, I have a serious problem. I'm connected via the serial port, and after installing OpenWRT with the Telia B12 module, I rebooted the system, but I'm getting the error you see on the screen. How can I fix it? If I press ESC, the boot is not recognized.

Please solution?

https://ibb.co/HTf34Nk

It doesn’t allow me to type any commands, and the LAN connection drops intermittently with a strange IP address.

Can any of you modify the ZTE framework using the mtd8.bin file with admin access to the root_ulmage file using the admin password, on B12? I uploaded the mtd8.bin file and just wanted to know if someone is able to do it. We know very well that this method blocks updates to B14, as it has already been tested. This way, even without a serial connection, the 4G band lock feature can be used.

Hello guys

Dump Nordic all version + Module Modem Telia All
https://drive.google.com/file/d/1wJLRoi … p=drivesdk

Dump Nordic B11 all package pass login: admin

https://drive.google.com/file/d/1PtEsh7 … p=drivesdk

Downgrade OpenWrt to Nordic:

mtd -e web write mtd8.bin web
mtd -e rootfs write mtd9.bin rootfs

mtd write mtd8.bin /dev/mtd8
mtd -r write mtd9.bin /dev/mtd9

Flag -r (reboot system now) and Nordic return Nordic version upload

Stick has already replied to me on the Italian forum, nothing can be done.

This, is photo module qualcom
https://ibb.co/3CWSzXc
https://ibb.co/3CWSzXc
https://ibb.co/5G68Ggt
https://ibb.co/G5HKhSF
https://ibb.co/CmhjgZW
https://ibb.co/ZftJjFy
https://ibb.co/TLvMxVn
https://ibb.co/2MZrcGd
https://ibb.co/MMJNB4Y
https://ibb.co/jbVR7K5

Can you enter this module in 9008?

"I solved it, guys, thanks to everyone. Here's the solution:
Using Nordic's serial interface, I issued the following commands to the two partitions showing skib bad block:
```
flash_erase -N /dev/mtd4 0 0
flash_erase -N /dev/mtd11 0 0
```
(I executed this command from Nordic's serial interface)
Then, to restore partitions mtd4 and 11, I used the kmod-mtd-rw package with its appropriate command.
Finally, I wrote the partitions with the following commands:
```
mtd write mtd4.bin /dev/mtd4
mtd write mtd11.bin /dev/mtd11
```
Thanks to everyone for the support."

So I'm trying it without the Nordic B12 working, but the issue is that the reset button doesn't work, and I can't test any SIM cards except for other Italian ones that start automatically. I'll do that. Let's see, I'll keep it on for two weeks. But I doubt that anything will change.

Basically, I tried using OpenWrt to send the command "nand erase mtd4," but U-Boot indicates "skipping bad block," the same happens with mtd11. I really want to remove them since I have the Nordic dumps. The issue is that the partitions I would like to delete, as the reset button doesn't work even with Nordic, I would like to fix everything to make the router work correctly.

If you could be clearer with me, I kindly ask: if I have to use Nordic, my main problem is not so much those partitions. I would like to fix the reset button that only works with OpenWrt; with Nordic, it doesn't. I would like to point out that my problem is this:

When I start Nordic with any firmware, I enter the password at login, and then everything crashes, I can't do anything anymore. If I try to access the web page, there are problems: nothing opens after entering the password.

P.S. I'll warn you about another thing, and then you let me know what to do. The problem I encounter is that if I load any firmware through the framework, it reaches 99%, but from the serial console, I see it says "Root_ulmage." I insert the "Root_ulmage" file via TFTP, also present in the framework; it installs it through its IP server. But the web interface always crashes.