Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Sprzęt / Hardware → ZTE MF296D
Strony 1
Zaloguj się lub zarejestruj by napisać odpowiedź
Hello, guys. I wanted to know some information about the ZTE MF296D router. Do you have any updates on whether it's possible to change the IMEI, and especially how to disassemble it? Can you give me some tips? The model is the one in the photo.
https://ibb.co/4snFH8Y
https://ibb.co/6wt0KDs
https://ibb.co/9sCL5sc
Thanks for response.
https://ztedevices.com/en-gl/zte-mf296d-router/
Forget, not supported by openwrt.
This is LTE cat.6 , so if there is modem on mPCIe inside ,it is same as MF286/A/R and or MF287 https://eko.one.pl/forum/viewtopic.php?id=23495
This, is photo module qualcom
https://ibb.co/3CWSzXc
https://ibb.co/3CWSzXc
https://ibb.co/5G68Ggt
https://ibb.co/G5HKhSF
https://ibb.co/CmhjgZW
https://ibb.co/ZftJjFy
https://ibb.co/TLvMxVn
https://ibb.co/2MZrcGd
https://ibb.co/MMJNB4Y
https://ibb.co/jbVR7K5
Can you enter this module in 9008?
Based on CPU ZX297520: sitll, not supported by openwrt.
Ok thank you
The module can be connected to an external adapter. And then it can probably be put into that mode. More information can be found here: https://github.com/stich86/ZTE-MF289F-R … l_brick.md
Maybe @stich86 or @smereka will suggest something on this topic.
The module can be connected to an external adapter. And then it can probably be put into that mode. More information can be found here: https://github.com/stich86/ZTE-MF289F-R … l_brick.md
Maybe @stich86 or @smereka will suggest something on this topic.
Stick has already replied to me on the Italian forum, nothing can be done.
Strony 1
Zaloguj się lub zarejestruj by napisać odpowiedź
eko.one.pl → Sprzęt / Hardware → ZTE MF296D
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc