Edit. Zabawa w terminalu uparte jest ten modem, chatgpt się pogubił już za cholerę nie che to wypuścić routingu ani adresu na interfejs eth przyjmuje wszystkie ustawienia ustawia routing firewall kolega robot twierdzi że musi działać! A on nie działa 
próbowałem z vlan i nic czyli ten deamon musi pewnie wydawać mu komendy aby go wybudzić, kolega wyżej z tematu pisał że ma frimware do wersji nie brandowanej chętnie bym takie wgrał widać że to jest to samo co poprzednik zte 830 a tam jest semi conductor.
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
Opcje wyszukiwania (Strona 1 z 3)
eko.one.pl → Posty przez michalik
Znalezione posty: 1 do 25 z 61
1 2026-04-18 21:24:50
Odp: ZTE MF258 (92 odpowiedzi, napisanych Sprzęt / Hardware)
2 2026-04-15 10:47:21
Odp: ZTE MF258 (92 odpowiedzi, napisanych Sprzęt / Hardware)
MiG25 napisał/a:
Trzeba jeszcze pamiętać o zasilaniu. Pewnie ten router z openwrt netgear nie ma PoE na gnieździe WAN , trzeba jakiś PoE iniector wymyśleć. ( w sumie to w tym gitcie też jest to napisane ,więc nie ,żebym jakąś Amerykę odkrył
).
To podstawa tego typu urządzeń jak ktoś kupuje to myślę że temat podstawy działania tych urządzeń jest mu znany, tam jest pasywny po 24v dość popularne z ubiquity zasilacze z Poe 24v na rynku, można też podłączyć adapter z mikrotik i zasilacz 24v
Generalnie jestem tutaj w temacie na forum dotyczącym poprzednika ZTE wf830 ten modem odu działa samodzielnie ma własne GUI u mnie już 2 takie działają na dachach, więc terez uderzyłem w nowszy model 258 z nadzieją że też można tak zrobić ale jak dotychczas nie udało się chociaż jeszcze nie wylutowałem się do konsoli, napewno spróbuję z tym demonem
3 2026-04-14 16:23:19
Odp: ZTE MF258 (92 odpowiedzi, napisanych Sprzęt / Hardware)
No dobrze czyli jeśli mam router z openwrt netgear nie zależny zrobię ten przepis to mając tylko odu z tej anteny będę mógł korzystać będzie działać? Przerabiałem wcześniejszy model wf830 i on działa samodzielnie ale tam jest konsola dostępna
4 2026-04-14 16:17:05
Odp: ZTE MF258 (92 odpowiedzi, napisanych Sprzęt / Hardware)
Ale czy odu ma interfejs własny ? Znalazłem taki przepis https://github.com/nedyarrd/lted_mf258
5 2026-04-14 14:28:50
Odp: ZTE MF258 (92 odpowiedzi, napisanych Sprzęt / Hardware)
Z tego co doczytałem to jest na jednostkę wewnętrzna idu a ja mam tylko odu
6 2026-04-14 10:43:12
Odp: ZTE MF258 (92 odpowiedzi, napisanych Sprzęt / Hardware)
Ktoś uruchomił na tym openwrt ? I działa ?
7 2026-04-14 09:57:00
Odp: ZTE MF258 (92 odpowiedzi, napisanych Sprzęt / Hardware)
Witam, coś udało się zrobić ciekawego z tą jednostką ? Kupiłem taki chce go uruchomić samodzielnie udało mi się uruchomić tak poprzedni model ZTE
8 2026-04-07 19:26:17
Odp: D-link Dwr 920 (2 odpowiedzi, napisanych Sprzęt / Hardware)
A zrobię zdjęcia jak na razie nie widziałem też miejsca w które konsolę by dało rady tam w ogóle podłączyć
9 2026-04-04 15:45:30
Temat: D-link Dwr 920 (2 odpowiedzi, napisanych Sprzęt / Hardware)
Witam, mam klika sztuk d-link Dwr 920 wszystkie mają ten sam problem po uruchomieniu świeci się power zielony i internet czerwony i nic się nie dzieje obydwa porty rj45 nie aktywne nienawidzą kabla, nie działa reset nie mogę wprowadzić w tryb awaryjny odzyskiwania, ktoś za ten router ? Czy jest możliwość naprawy ?
10 2025-08-30 22:34:22
Odp: ZTE WF830 ODU – brak dostępu po zmianie APN, szukam instrukcji (65 odpowiedzi, napisanych Inne)
Myślałem tylko że wymyśliłem coś innego ale wychodzi na to samo raczej,
Zaczynamy wiec od zera modem zablokowany po ruszeniu apn świecą się wszystkie kontrolki
1. wlutowanie się w port szeregowy programator cp2102 na USB słuszna uwaga kolegi o tym napięciu jednak dość długo (3 nocki bawiłem się na napięcie standardowe 3v i nic się nie stało)
2. Program Tera Term prędkość bit najwyższa, komendy - shell - ifconfig eth0 169.254.0.1 netmask 255.255.255.0 up
3. modem połączony z komputerem przewodowo - ustawiamy stałe ip 169.254.0.2, maska 255.255.255.0, brama 169.254.0.1
w przeglądarce adres 169.254.0.1 = otwiera się interfejs GUI
3. W interfejsie GUI - factory reset apply (wyskoczy informacja że coś tam LTE device nie działa ok dajemy wchodzimy do LTE
setting klikamy enable on (wyskoczy informacja uruchom ponownie OK) obserwujemy konsole reboot leci modem wstanie na ustawieniach fabrycznych OK (dhcp juz działa ale adres ustawiłem taki sam jak w dhcp domyślny wiec nie trzeba grzebać powrót interfejs GUI działa
4. Program putty adres 169.254.0.1 port 23 other telnet otwieramy konsolę login root hasło: gct lub Si8a&2vV9 u mnie było to drugie i chwała temu kto je tutaj na forum udostępnił 
, wydajemy komendy
ucfg set config lan vlan ENABLE 0
ucfg set config wan lte apntable apn1 pdn_label aero2 (lub np. Plus, Pley, Orange)
ucfg set config wan lte apntable apn1 apn_name darmowy (dla aero2, u mnie 'internet' dla plusa)
robimy reboot (komenda reset) po tym resecie mój modem wstał już połączony z internetem oczywiście wcześniej włożona karta sim bez pinu i wsunie to gotowe działa programator można odłączyć
Teraz najważniejsze przetestowałem wszystko i powiem czego nie tykać w GUI !!!!!!!!!!! bo jeśli ruszymy mamy powtórkę wszystkiego od początku ! APN jak chcemy zmienić to tylko przez telnet i komendy ucfg ! !
LTE
- LTE APN Table (cokolwiek ruszysz lub wyłączysz index przyjmie ustawienia do pierwszego reboot i modem zablokowany)
- IMEI nie ruszamy
- AIR PLANE MODE disable
- UE Mode PS mode 2 (chociaż to przełączałem i po restarcie wszystko było ok)
- PLMN Search Type (można spokojnie zmieniać sobie)
- PLMN Search Extension Info ( można zmieniać)
- EMM Timer ( można zmieniać)
- PSM Timer( można zmieniać)
- Location Service ( można zmieniać)
- IMS PCAP ( tego nie tykałem nie wiem lepiej nie ruszać)
Sim Pin ( nie sprawdzałem najlepiej aby karta była bez pinu i nic tam nie ruszać)
SMS
- Configuration - SMS Over IP (przełączyłem na disable)
- SMS Status - SCA (numer centrum SMS u mnie zgodny z operatorem nie ruszałęm)
- Message (miałem zapisane sms od poprzedniego własciciela zrobiłem delete)
Grzebanie w SMS nic nie porobiło sie wiec można tam grzebać
VoLTE (enable OFF) Testowałem to nic sie nie działo nie zawiesił się ale czytałem ze i tak to nie działa bez jednostki IDU wiec nie ma sensu tego ruszać lepiej wyłączyć
Wimax (nie jestem pewny ale robiłem off i miałem blokadę po restarcie wiec lepiej tego nie ruszać a ja jeszcze sprawdzę)
Network
można grzebać tylko jak wyłączałem
Ethernet Network, USB Network, - traciłem dostęp do konsoli i dostawał świra o vlan i blokada wiec lepiej nie grzebać tam
Może ktoś ma jeszcze jakieś ciekawe komendy ustawienia w konsoli do wdrożenia to mogę posprawdzać
Edit
komenda w telnet
ucfg set config wan wimax ENABLE 0
wyłączamy wimax sprawdzone wszystko działa !
11 2025-08-29 21:55:09
Odp: ZTE WF830 ODU – brak dostępu po zmianie APN, szukam instrukcji (65 odpowiedzi, napisanych Inne)
Zrobione jest inny sposób jakby ktoś chciał opiszę
12 2025-08-29 20:44:16
Odp: ZTE WF830 ODU – brak dostępu po zmianie APN, szukam instrukcji (65 odpowiedzi, napisanych Inne)
Zatrzymaj bridge:
ifconfig br0 down
brctl delbr br0
Ustaw IP na eth0 zamiast na br0:
ifconfig eth0 192.168.1.1 netmask 255.255.255.0 up
to wprowadzam w shell i sukces dostałem sie do gui konsoli ale każdy reboot przywraca stan poprzedni nie mogę tych vlan wyłączyć nie wiem moze trzeba do innej powłoki wejść
13 2025-08-29 08:03:12
Odp: ZTE WF830 ODU – brak dostępu po zmianie APN, szukam instrukcji (65 odpowiedzi, napisanych Inne)
Dobrze mam telnet ale nie mogę w nim pisać w konsoli, łączę się przez tera term log się ładuje następnie wprowadzam komendę Shell i tam wprowadzić komendy do zmiany ? Z czego pamiętam bo teraz nie wiem czy dobrze wprowadzałem nie chciały te komendy działać, i u mnie ładuje się zestaw numer 2 w logu
Edit.
ucfg get config
NOK
Może wprowadzam ta komendę gdzieś źle
14 2025-08-28 22:22:42
Odp: ZTE WF830 ODU – brak dostępu po zmianie APN, szukam instrukcji (65 odpowiedzi, napisanych Inne)
czy mogę prosić o pomoc jak połączyć sie przez scp albo jak wgrac ten plik konfiguracji przez tera term
15 2025-08-27 15:23:50
Odp: ZTE WF830 ODU – brak dostępu po zmianie APN, szukam instrukcji (65 odpowiedzi, napisanych Inne)
Dzięki będę próbować mam nadzieję że samo cfg wystarczy może wgram poprostu całe twoje i ustawie APN mój tylko
16 2025-08-27 08:12:09
Odp: ZTE WF830 Problem z modemem LTE (5 odpowiedzi, napisanych Inne)
O znalazłem ten sam problem
https://eko.one.pl/forum/viewtopic.php? … 54#p323154
17 2025-08-27 07:59:02
Odp: ZTE WF830 ODU – brak dostępu po zmianie APN, szukam instrukcji (65 odpowiedzi, napisanych Inne)
Witam, u mnie ta sama sytuacja po zakupie zmiana APN i zong coś potrafię ale nie tak głęboko więc jestem tu udało się postawić ten sprzęt ? Prosiłbym o instrukcje w konsoli już jestem łącze sie przez uart
18 2025-08-27 07:44:22
Odp: ZTE WF830 Problem z modemem LTE (5 odpowiedzi, napisanych Inne)
W konsoli wszystko wstaje uruchamia tego demona i ten log z LTE szukałem firmware nigdzie nic nie ma kurde nawet te gui jakieś dziwne było ktoś tu na forum pisałem że postawił jakieś firmware
19 2025-08-27 07:22:12
Odp: ZTE WF830 Problem z modemem LTE (5 odpowiedzi, napisanych Inne)
To już udało mi się dowiedzieć, kupiłem go używany odpaliłem gui wskoczyło z logo
GCT, włożyłem swoją kartę SIM było nawet połączenie w statusie po czym ustawiem apn wyłączałem ethernet USB w opcji i reboot i tak się stało dlaczego miało by upalić modem ?
20 2025-08-26 23:45:09
Temat: ZTE WF830 Problem z modemem LTE (5 odpowiedzi, napisanych Inne)
witam, kupiłem LTE WF830 po uruchomieniu dostałem sie przez lan do gui dokonałem ustawień wpisałem APN, po restarcie nie mogę sie dostać do gui wszystkie kontrolki sie świecą, wlutowałem sie do portu szeregowego oto końcowy log
***************************************
* LTE DAEMON START *
***************************************
lted: ind_watchdog_init()
lted: [SERVER] new connection request
lted: [SERVER] assigns client index 0
act=0
lted: [SERVER] new connection request
lted: [SERVER] assigns client index 1
lted_client_init_ex success[SMS]Wait LTE PS INIT..
Disable GPS Module ...
Not Used
ugserver: [main 1024]Start UGServer.
modify zm zone info ---> running
Server Bind Failed: Cannot assign requested address
zone @off(0x00000000)
Server Bind Failed: Cannot assign requested address
lted: [SERVER] new connection request
lted: [SERVER] assigns client index 2
lted_client_init_ex successatcm: [atcm]There is no LTE device, please check LTE device or LTE F/W
[SMS]There is no LTE device, please check LTE device or LTE F/W
[SMS]Wait LTE PS INIT..
atcm: [atcm]There is no LTE device, please check LTE device or LTE F/W
[SMS]There is no LTE device, please check LTE device or LTE F/W
[SMS]Wait LTE PS INIT..
atcm: [atcm]There is no LTE device, please check LTE device or LTE F/W
[SMS]There is no LTE device, please check LTE device or LTE F/W
[SMS]Wait LTE PS INIT..
atcm: [atcm]There is no LTE device, please check LTE device or LTE F/W
[SMS]There is no LTE device, please check LTE device or LTE F/W
[SMS]Wait LTE PS INIT..
atcm: [atcm]There is no LTE device, please check LTE device or LTE F/W
[SMS]There is no LTE device, please check LTE device or LTE F/W
[SMS]Wait LTE PS INIT..
atcm: [atcm]There is no LTE device, please check LTE device or LTE F/W
[SMS]There is no LTE device, please check LTE device or LTE F/W
[SMS]Wait LTE PS INIT..
atcm: [atcm]There is no LTE device, please check LTE device or LTE F/W
[SMS]There is no LTE device, please check LTE device or LTE F/W
[SMS]Wait LTE PS INIT..
atcm: [atcm]There is no LTE device, please check LTE device or LTE F/W
[SMS]There is no LTE device, please check LTE device or LTE F/W
[SMS]Wait LTE PS INIT..
atcm: [atcm]There is no LTE device, please check LTE device or LTE F/W
[SMS]There is no LTE device, please check LTE device or LTE F/W
[SMS]Wait LTE PS INIT..
reset nie działa da sie to urządzenie uratować ? co sie stało ?
21 2023-12-28 16:05:06
Odp: Netgear wndr3700 v4 wypadanie wifi (3 odpowiedzi, napisanych Sprzęt / Hardware)
O proszę, sprawdzam raczej nie ma chociaż może coś bawiłem się i coś się uruchomiło takiego
Można to jakoś sprawdzić ?
22 2023-12-27 11:53:57
Temat: Netgear wndr3700 v4 wypadanie wifi (3 odpowiedzi, napisanych Sprzęt / Hardware)
Witam czy ktoś może sprawdzić logi wszystko było w porządku przez dłuższy czas, aktualnie wifi na chwilę się traci w homeassistant moje urządzenia tracą połączenie za chwilę wracają
[ 0.000000] Linux version 5.15.137 (cezary@eko.one.pl) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23004-7f0db09513) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 Wed Nov 15 10:00:19 2023
[ 0.000000] printk: bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[ 0.000000] MIPS: machine is Netgear WNDR3700 v4
[ 0.000000] SoC: Atheros AR9344 rev 2
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
[ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 120232K/131072K available (6643K kernel code, 582K rwdata, 836K rodata, 1212K init, 222K bss, 10840K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 51
[ 0.000000] CPU clock: 560.000 MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
[ 0.000002] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
[ 0.008398] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[ 0.085007] pid_max: default: 32768 minimum: 301
[ 0.091066] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.098893] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.115597] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.126137] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.133653] pinctrl core: initialized pinctrl subsystem
[ 0.141467] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.148459] thermal_sys: Registered thermal governor 'step_wise'
[ 0.151708] gpio-18 (netgear:ext:lna0): hogged as output/high
[ 0.164267] gpio-19 (netgear:ext:lna1): hogged as output/high
[ 0.185184] clocksource: Switched to clocksource MIPS
[ 0.192310] NET: Registered PF_INET protocol family
[ 0.197892] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.206776] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.215758] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.224021] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.232216] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.239751] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.246692] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.253682] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.261647] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.267795] PCI: CLS 0 bytes, default 32
[ 0.276097] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[ 0.289560] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.295845] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.308036] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.320698] pinctrl-single 1804002c.pinmux: 544 pins, size 68
[ 0.328254] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.338255] printk: console [ttyS0] disabled
[ 0.342897] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 2500000) is a 16550A
[ 0.352162] printk: console [ttyS0] enabled
[ 0.361078] printk: bootconsole [early0] disabled
[ 0.392858] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1
[ 0.399390] nand: Micron NAND 128MiB 3,3V 8-bit
[ 0.403995] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.411756] Scanning device for bad blocks
[ 0.499871] 12 fixed-partitions partitions found on MTD device ar934x-nand
[ 0.506936] OF: Bad cell count for /ahb/nand@1b000200/partitions
[ 0.513076] OF: Bad cell count for /ahb/nand@1b000200/partitions
[ 0.519954] OF: Bad cell count for /ahb/nand@1b000200/partitions
[ 0.526155] OF: Bad cell count for /ahb/nand@1b000200/partitions
[ 0.532513] Creating 12 MTD partitions on "ar934x-nand":
[ 0.537965] 0x000000000000-0x000000040000 : "u-boot"
[ 0.547256] 0x000000040000-0x000000080000 : "u-boot-env"
[ 0.553910] 0x000000080000-0x0000000c0000 : "caldata"
[ 0.562268] 0x0000000c0000-0x000000140000 : "pot"
[ 0.568274] 0x000000140000-0x000000340000 : "language"
[ 0.576689] 0x000000340000-0x0000003c0000 : "config"
[ 0.582927] 0x0000003c0000-0x0000006c0000 : "traffic_meter"
[ 0.591660] 0x0000006c0000-0x000000ac0000 : "kernel"
[ 0.598039] 0x000000ac0000-0x000001fc0000 : "ubiconcat0"
[ 0.606685] 0x0000006c0000-0x000001fc0000 : "firmware"
[ 0.736009] 0x000001fc0000-0x000002000000 : "caldata_backup"
[ 0.743053] 0x000002000000-0x000008000000 : "ubiconcat1"
[ 0.758941] Concatenating MTD devices:
[ 0.762764] (0): "ubiconcat0"
[ 0.765852] (1): "ubiconcat1"
[ 0.768869] into device "ubi-concat"
[ 0.772535] 1 fixed-partitions partitions found on MTD device ubi-concat
[ 0.779359] Creating 1 MTD partitions on "ubi-concat":
[ 0.784580] 0x000000000000-0x000007500000 : "ubi"
[ 1.151191] switch0: Atheros AR8327 rev. 4 switch registered on mdio.0
[ 1.805446] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[ 1.816782] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
[ 1.827520] NET: Registered PF_INET6 protocol family
[ 1.846670] Segment Routing with IPv6
[ 1.850499] In-situ OAM (IOAM) with IPv6
[ 1.854653] NET: Registered PF_PACKET protocol family
[ 1.859935] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.873485] 8021q: 802.1Q VLAN Support v1.8
[ 1.882804] PCI host bridge to bus 0000:00
[ 1.887043] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 1.894031] pci_bus 0000:00: root bus resource [io 0x0000]
[ 1.899708] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.907811] pci 0000:00:00.0: [168c:0033] type 00 class 0x028000
[ 1.913951] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
[ 1.920912] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 1.927814] pci 0000:00:00.0: supports D1
[ 1.931889] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 1.939511] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 1.946324] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
[ 1.953776] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
[ 1.966516] UBI: auto-attach mtd12
[ 1.970015] ubi0: attaching mtd12
[ 2.901869] ubi0: scanning is finished
[ 2.917144] ubi0: attached mtd12 (name "ubi", size 117 MiB)
[ 2.922830] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.929862] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.936783] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.943851] ubi0: good PEBs: 936, bad PEBs: 0, corrupted PEBs: 0
[ 2.949966] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 2.957309] ubi0: max/mean erase counter: 14/4, WL threshold: 4096, image sequence number: 1621285393
[ 2.966689] ubi0: available PEBs: 0, total reserved PEBs: 936, PEBs reserved for bad PEB handling: 19
[ 2.976150] ubi0: background thread "ubi_bgt0d" started, PID 235
[ 2.984078] block ubiblock0_0: created from ubi0:0(rootfs)
[ 2.989730] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 3.003278] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 3.016282] Freeing unused kernel image (initmem) memory: 1212K
[ 3.022305] This architecture does not have kernel memory protection.
[ 3.028885] Run /sbin/init as init process
[ 3.033040] with arguments:
[ 3.033046] /sbin/init
[ 3.033052] with environment:
[ 3.033058] HOME=/
[ 3.033064] TERM=linux
[ 3.581417] init: Console is alive
[ 3.585506] init: - watchdog -
[ 5.756477] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 5.861686] usbcore: registered new interface driver usbfs
[ 5.867434] usbcore: registered new interface driver hub
[ 5.872914] usbcore: registered new device driver usb
[ 5.962080] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.982655] SCSI subsystem initialized
[ 5.993743] fsl-ehci: Freescale EHCI Host controller driver
[ 6.002963] ehci-platform: EHCI generic platform driver
[ 6.008780] ehci-platform 1b000000.usb: EHCI Host Controller
[ 6.014619] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
[ 6.022757] ehci-platform 1b000000.usb: irq 3, io mem 0x1b000000
[ 6.055208] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
[ 6.062507] hub 1-0:1.0: USB hub found
[ 6.067322] hub 1-0:1.0: 1 port detected
[ 6.082738] usbcore: registered new interface driver usb-storage
[ 6.092238] usbcore: registered new interface driver uas
[ 6.099193] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.117155] init: - preinit -
[ 7.359644] random: jshn: uninitialized urandom read (4 bytes read)
[ 7.536414] random: jshn: uninitialized urandom read (4 bytes read)
[ 7.794448] mtdblock: MTD device 'caldata' is NAND, please consider using UBI block devices instead.
[ 7.827107] random: jshn: uninitialized urandom read (4 bytes read)
[ 8.482892] random: jshn: uninitialized urandom read (4 bytes read)
[ 9.524798] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is up
[ 9.531130] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[ 9.537391] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 3 is up
[ 9.543636] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 4 is up
[ 9.549893] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 5 is up
[ 9.557426] eth0: link up (1000Mbps/Full duplex)
[ 9.596237] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 9.614026] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 9.761370] random: procd: uninitialized urandom read (4 bytes read)
[ 11.896406] mount_root: loading kmods from internal overlay
[ 11.965426] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 11.979939] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 12.264476] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 12.270550] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 413
[ 12.339352] UBIFS (ubi0:1): recovery needed
[ 12.553185] UBIFS (ubi0:1): recovery completed
[ 12.557863] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 12.565851] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 12.575931] UBIFS (ubi0:1): FS size: 107167744 bytes (102 MiB, 844 LEBs), max 855 LEBs, journal size 5332992 bytes (5 MiB, 42 LEBs)
[ 12.587967] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 12.594688] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 000108A4-D6FD-4561-BD2B-C8B6A4EAD7DB, small LPT model
[ 12.608086] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 12.620823] block: extroot: not configured
[ 12.625396] UBIFS (ubi0:1): un-mount UBI device 0
[ 12.630220] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 12.642636] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 12.648686] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 416
[ 12.705242] random: crng init done
[ 12.708726] random: 5 urandom warning(s) missed due to ratelimiting
[ 12.821321] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 12.829349] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 12.839432] UBIFS (ubi0:1): FS size: 107167744 bytes (102 MiB, 844 LEBs), max 855 LEBs, journal size 5332992 bytes (5 MiB, 42 LEBs)
[ 12.851458] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 12.858181] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 000108A4-D6FD-4561-BD2B-C8B6A4EAD7DB, small LPT model
[ 12.876644] mount_root: loading kmods from internal overlay
[ 13.055587] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 13.066172] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 13.134126] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 13.145945] block: extroot: not configured
[ 13.153073] mount_root: switching to ubifs overlay
[ 13.170722] urandom-seed: Seeding with /etc/urandom.seed
[ 13.274140] eth0: link down
[ 13.304069] procd: - early -
[ 13.307507] procd: - watchdog -
[ 14.165497] procd: - watchdog -
[ 14.177249] procd: - ubus -
[ 14.396401] procd: - init -
[ 17.133687] kmodloader: loading kernel modules from /etc/modules.d/*
[ 18.158780] tun: Universal TUN/TAP device driver, 1.6
[ 18.247909] ksmbd: The ksmbd server is experimental, use at your own risk.
[ 18.287037] GACT probability on
[ 18.297202] Mirror/redirect action on
[ 18.359716] u32 classifier
[ 18.362492] input device check on
[ 18.366272] Actions configured
[ 18.475492] ntfs3: Max link count 4000
[ 18.479321] ntfs3: Enabled Linux POSIX ACLs support
[ 18.571656] usbcore: registered new interface driver cdc_acm
[ 18.577474] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 18.627231] usbcore: registered new interface driver cdc_wdm
[ 18.676336] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b
[ 18.683948] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36
[ 18.817994] usbcore: registered new interface driver usblp
[ 18.849968] usbcore: registered new interface driver usbserial_generic
[ 18.856769] usbserial: USB Serial support registered for generic
[ 18.992844] xt_time: kernel timezone is -0000
[ 19.000412] usbcore: registered new interface driver cdc_ether
[ 19.038665] usbcore: registered new interface driver cdc_ncm
[ 19.157289] usbcore: registered new interface driver huawei_cdc_ncm
[ 20.085242] PPP generic driver version 2.4.2
[ 20.093060] NET: Registered PF_PPPOX protocol family
[ 20.138657] usbcore: registered new interface driver qmi_wwan
[ 20.168518] usbcore: registered new interface driver rndis_host
[ 20.218087] usbcore: registered new interface driver sierra
[ 20.223854] usbserial: USB Serial support registered for Sierra USB modem
[ 20.301640] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 20.309660] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 20.518889] usbcore: registered new interface driver cdc_mbim
[ 20.588222] usbcore: registered new interface driver option
[ 20.593990] usbserial: USB Serial support registered for GSM modem (1-port)
[ 20.669947] usbcore: registered new interface driver qcserial
[ 20.675951] usbserial: USB Serial support registered for Qualcomm USB modem
[ 20.799952] ath: EEPROM regdomain: 0x0
[ 20.799982] ath: EEPROM indicates default country code should be used
[ 20.799989] ath: doing EEPROM country->regdmn map search
[ 20.800007] ath: country maps to regdmn code: 0x3a
[ 20.800017] ath: Country alpha2 being used: US
[ 20.800025] ath: Regpair used: 0x3a
[ 20.813537] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 20.815895] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=12
[ 20.823172] ath9k 0000:00:00.0: enabling device (0000 -> 0002)
[ 20.950665] ath: EEPROM regdomain: 0x0
[ 20.950693] ath: EEPROM indicates default country code should be used
[ 20.950701] ath: doing EEPROM country->regdmn map search
[ 20.950719] ath: country maps to regdmn code: 0x3a
[ 20.950729] ath: Country alpha2 being used: US
[ 20.950738] ath: Regpair used: 0x3a
[ 20.961301] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 20.963484] gpio-496 (netgear:power:usb): hogged as output/high
[ 20.969904] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=16
[ 21.075921] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 21.199382] urngd: v1.0.2 started.
[ 58.045221] eth0: link up (1000Mbps/Full duplex)
[ 58.068815] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 58.078351] br-lan: port 1(eth0.1) entered blocking state
[ 58.083863] br-lan: port 1(eth0.1) entered disabled state
[ 58.089755] device eth0.1 entered promiscuous mode
[ 58.094633] device eth0 entered promiscuous mode
[ 58.162532] br-lan: port 1(eth0.1) entered blocking state
[ 58.168115] br-lan: port 1(eth0.1) entered forwarding state
[ 58.291518] br-wan: port 1(eth0.2) entered blocking state
[ 58.297109] br-wan: port 1(eth0.2) entered disabled state
[ 58.385289] device eth0.2 entered promiscuous mode
[ 58.425649] br-wan: port 1(eth0.2) entered blocking state
[ 58.431166] br-wan: port 1(eth0.2) entered listening state
[ 65.617916] ath: EEPROM regdomain: 0x8268
[ 65.622013] ath: EEPROM indicates we should expect a country code
[ 65.628264] ath: doing EEPROM country->regdmn map search
[ 65.633655] ath: country maps to regdmn code: 0x37
[ 65.638537] ath: Country alpha2 being used: PL
[ 65.643050] ath: Regpair used: 0x37
[ 65.646600] ath: regdomain 0x8268 dynamically updated by user
[ 65.652508] ath: EEPROM regdomain: 0x8268
[ 65.656599] ath: EEPROM indicates we should expect a country code
[ 65.662785] ath: doing EEPROM country->regdmn map search
[ 65.668184] ath: country maps to regdmn code: 0x37
[ 65.673042] ath: Country alpha2 being used: PL
[ 65.677561] ath: Regpair used: 0x37
[ 65.681101] ath: regdomain 0x8268 dynamically updated by user
[ 66.946682] ksmbd: The ksmbd server is experimental, use at your own risk.
[ 67.065231] br-wan: port 1(eth0.2) entered learning state
[ 72.932258] br-lan: port 2(vlan1) entered blocking state
[ 72.937741] br-lan: port 2(vlan1) entered disabled state
[ 72.943500] device vlan1 entered promiscuous mode
[ 74.277539] br-lan: port 3(phy0-ap0) entered blocking state
[ 74.283229] br-lan: port 3(phy0-ap0) entered disabled state
[ 74.289314] device phy0-ap0 entered promiscuous mode
[ 75.288552] br-lan: port 2(vlan1) entered blocking state
[ 75.294001] br-lan: port 2(vlan1) entered forwarding state
[ 75.385253] br-wan: port 1(eth0.2) entered forwarding state
[ 75.390967] br-wan: topology change detected, propagating
[ 78.496891] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap0: link becomes ready
[ 78.503945] br-lan: port 3(phy0-ap0) entered blocking state
[ 78.509684] br-lan: port 3(phy0-ap0) entered forwarding state
[43209.696618] br-wan: port 1(eth0.2) entered disabled state
[43209.719171] br-wan: port 1(eth0.2) entered blocking state
[43209.724729] br-wan: port 1(eth0.2) entered listening state
[43217.967518] br-wan: port 1(eth0.2) entered learning state
[43226.287407] br-wan: port 1(eth0.2) entered forwarding state
[43226.293098] br-wan: topology change detected, propagating
[55580.236838] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is down
[55582.316586] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is up
[56219.830585] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[56223.990174] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[56340.469121] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[56343.589034] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[56404.954635] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[56407.028005] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[64809.755737] br-wan: port 1(eth0.2) entered disabled state
[64809.777551] br-wan: port 1(eth0.2) entered blocking state
[64809.783144] br-wan: port 1(eth0.2) entered listening state
[64818.378073] br-wan: port 1(eth0.2) entered learning state
[64826.697986] br-wan: port 1(eth0.2) entered forwarding state
[64826.703702] br-wan: topology change detected, propagating
[73874.680751] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 3 is down
[74024.438819] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 3 is up
[74048.372087] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 3 is down
[74071.238326] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 3 is up
[84998.489066] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[85000.556839] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[85057.756185] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[85329.192966] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[85342.713018] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[85346.872691] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[85403.032353] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[85406.152146] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[85926.670316] ksmbd: The ksmbd server is experimental, use at your own risk.
[85978.305995] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[85982.465699] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[86062.545060] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[86065.665143] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[86409.861779] br-wan: port 1(eth0.2) entered disabled state
[86409.883031] br-wan: port 1(eth0.2) entered blocking state
[86409.888585] br-wan: port 1(eth0.2) entered listening state
[86418.140416] br-wan: port 1(eth0.2) entered learning state
[86426.460354] br-wan: port 1(eth0.2) entered forwarding state
[86426.466059] br-wan: topology change detected, propagating
[105322.458515] ksmbd: PDU length(5198676) excceed maximum allowed pdu size(16384) on connection(0)
[108009.904637] br-wan: port 1(eth0.2) entered disabled state
[108009.927039] br-wan: port 1(eth0.2) entered blocking state
[108009.932715] br-wan: port 1(eth0.2) entered listening state
[108018.549931] br-wan: port 1(eth0.2) entered learning state
[108026.869816] br-wan: port 1(eth0.2) entered forwarding state
[108026.875613] br-wan: topology change detected, propagating
[121972.487421] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is down
[121974.567112] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is up
[121976.647360] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is down
[121978.727101] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is up
[121990.167242] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is down
[121991.206986] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is up
[121997.447150] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is down
[121999.526892] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is up
[129610.967865] br-wan: port 1(eth0.2) entered disabled state
[129610.989493] br-wan: port 1(eth0.2) entered blocking state
[129610.995164] br-wan: port 1(eth0.2) entered listening state
[129619.612797] br-wan: port 1(eth0.2) entered learning state
[129627.932738] br-wan: port 1(eth0.2) entered forwarding state
[129627.938547] br-wan: topology change detected, propagating
[141276.049531] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[141280.208885] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[141374.848092] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[141377.967830] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[143375.785697] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is down
[143377.865399] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is up
[144414.734373] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[144418.894061] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[144480.253636] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[144483.373307] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[144729.864163] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[144734.010461] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[144833.849604] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[144836.969296] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[145494.242194] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[145498.401861] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[145598.241078] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[145601.360749] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[146152.554878] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[146156.714470] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[146255.514091] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[146258.633360] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[151211.986274] br-wan: port 1(eth0.2) entered disabled state
[151212.007358] br-wan: port 1(eth0.2) entered blocking state
[151212.013022] br-wan: port 1(eth0.2) entered listening state
[151220.658664] br-wan: port 1(eth0.2) entered learning state
[151228.978547] br-wan: port 1(eth0.2) entered forwarding state
[151228.984326] br-wan: topology change detected, propagating
[158156.106971] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[158160.266610] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[158255.945883] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[158259.065604] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[160757.120236] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[160760.239927] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[160822.640000] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[160825.759348] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[161069.117032] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[161073.276719] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[161171.035981] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[161174.155728] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[161942.707985] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[161946.867655] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[162043.586960] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[162046.706656] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[165159.396141] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[165163.555928] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[165269.635076] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[165272.754864] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[166000.747947] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[166003.867516] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[166109.946759] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[166113.066466] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[172812.049667] br-wan: port 1(eth0.2) entered disabled state
[172812.071180] br-wan: port 1(eth0.2) entered blocking state
[172812.076807] br-wan: port 1(eth0.2) entered listening state
[172820.438124] br-wan: port 1(eth0.2) entered learning state
[172828.758067] br-wan: port 1(eth0.2) entered forwarding state
[172828.763842] br-wan: topology change detected, propagating
[194412.101923] br-wan: port 1(eth0.2) entered disabled state
[194412.122552] br-wan: port 1(eth0.2) entered blocking state
[194412.128181] br-wan: port 1(eth0.2) entered listening state
[194420.220898] br-wan: port 1(eth0.2) entered learning state
[194428.540775] br-wan: port 1(eth0.2) entered forwarding state
[194428.546563] br-wan: topology change detected, propagating
[216012.135564] br-wan: port 1(eth0.2) entered disabled state
[216012.155968] br-wan: port 1(eth0.2) entered blocking state
[216012.161618] br-wan: port 1(eth0.2) entered listening state
[216020.637393] br-wan: port 1(eth0.2) entered learning state
[216028.957368] br-wan: port 1(eth0.2) entered forwarding state
[216028.963156] br-wan: topology change detected, propagating
[237612.172088] br-wan: port 1(eth0.2) entered disabled state
[237612.193003] br-wan: port 1(eth0.2) entered blocking state
[237612.198656] br-wan: port 1(eth0.2) entered listening state
[237620.416078] br-wan: port 1(eth0.2) entered learning state
[237628.736008] br-wan: port 1(eth0.2) entered forwarding state
[237628.741820] br-wan: topology change detected, propagating
[246059.129478] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is down
[246060.169225] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is up
[248395.025236] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[248398.144698] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[248453.264700] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[248456.384092] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[251426.592723] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[251430.752423] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[251538.911477] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[251542.031737] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[252300.183708] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[252304.343287] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[252358.422852] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[252361.542723] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[254431.680598] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[254435.840307] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[254659.438447] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[254662.558643] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[254718.717694] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[254720.797864] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[255387.430956] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[255389.510255] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[255531.988738] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[255536.148777] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[255645.347772] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[255648.467213] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[256335.900699] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[256340.060032] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[256394.139729] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[256397.259230] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[257686.845699] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[257691.005414] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[257751.325349] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[257754.445141] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[259213.182271] br-wan: port 1(eth0.2) entered disabled state
[259213.204714] br-wan: port 1(eth0.2) entered blocking state
[259213.210362] br-wan: port 1(eth0.2) entered listening state
[259221.468336] br-wan: port 1(eth0.2) entered learning state
[259229.788208] br-wan: port 1(eth0.2) entered forwarding state
[259229.794008] br-wan: topology change detected, propagating
[259297.788569] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[259301.947946] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[259410.107385] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[259413.226746] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[259468.346522] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[259470.426091] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[260620.654421] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[260622.733677] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[260670.573787] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[260674.733141] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[260782.892657] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[260786.011923] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[260841.131653] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[260843.211331] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[264523.731774] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[264526.851511] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[264597.571008] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[264601.730693] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[264655.810362] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[264658.930022] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[265720.838997] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[265724.998532] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[265898.677148] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[265901.796935] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[265955.876451] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
[265957.956049] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[280812.173720] br-wan: port 1(eth0.2) entered disabled state
[280812.193403] br-wan: port 1(eth0.2) entered blocking state
[280812.199077] br-wan: port 1(eth0.2) entered listening state
[280820.598759] br-wan: port 1(eth0.2) entered learning state
[280828.918668] br-wan: port 1(eth0.2) entered forwarding state
[280828.924455] br-wan: topology change detected, propagating
[302412.198769] br-wan: port 1(eth0.2) entered disabled state
[302412.218993] br-wan: port 1(eth0.2) entered blocking state
[302412.224630] br-wan: port 1(eth0.2) entered listening state
[302420.375215] br-wan: port 1(eth0.2) entered learning state
[302428.695115] br-wan: port 1(eth0.2) entered forwarding state
[302428.700902] br-wan: topology change detected, propagating
[303098.049170] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is down
[303105.328479] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is up
[303116.768636] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is down
[303118.848370] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is up
[303125.088544] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is down
[303127.168283] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is up
[319248.035574] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is down
[319249.075218] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is up
[324012.214976] br-wan: port 1(eth0.2) entered disabled state
[324012.236234] br-wan: port 1(eth0.2) entered blocking state
[324012.241883] br-wan: port 1(eth0.2) entered listening state
[324020.784938] br-wan: port 1(eth0.2) entered learning state
[324029.104877] br-wan: port 1(eth0.2) entered forwarding state
[324029.110677] br-wan: topology change detected, propagating
[340194.929272] br-lan: port 3(phy0-ap0) entered disabled state
[340194.979922] br-lan: port 3(phy0-ap0) entered disabled state
[340194.995108] device phy0-ap0 left promiscuous mode
[340195.000103] br-lan: port 3(phy0-ap0) entered disabled state
[340197.650478] br-lan: port 3(phy0-ap0) entered blocking state
[340197.656509] br-lan: port 3(phy0-ap0) entered disabled state
[340197.662623] device phy0-ap0 entered promiscuous mode
[340199.433956] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap0: link becomes ready
[340199.441012] br-lan: port 3(phy0-ap0) entered blocking state
[340199.446866] br-lan: port 3(phy0-ap0) entered forwarding state
[341995.541436] device phy0-ap0 left promiscuous mode
[341995.546621] br-lan: port 3(phy0-ap0) entered disabled state
[341999.739346] br-lan: port 3(phy0-ap0) entered blocking state
[341999.745324] br-lan: port 3(phy0-ap0) entered disabled state
[341999.751691] device phy0-ap0 entered promiscuous mode
[341999.757530] br-lan: port 3(phy0-ap0) entered blocking state
[341999.763331] br-lan: port 3(phy0-ap0) entered forwarding state
[342000.072167] ksmbd: The ksmbd server is experimental, use at your own risk.
[342249.199086] br-lan: port 3(phy0-ap0) entered disabled state
[342249.266790] br-lan: port 3(phy0-ap0) entered disabled state
[342249.281224] device phy0-ap0 left promiscuous mode
[342249.286559] br-lan: port 3(phy0-ap0) entered disabled state
[342249.776862] br-lan: port 3(phy0-ap0) entered blocking state
[342249.782885] br-lan: port 3(phy0-ap0) entered disabled state
[342249.789188] device phy0-ap0 entered promiscuous mode
[342249.794565] br-lan: port 3(phy0-ap0) entered blocking state
[342249.800350] br-lan: port 3(phy0-ap0) entered forwarding state
[342250.202702] br-lan: port 3(phy0-ap0) entered disabled state
[342251.827615] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap0: link becomes ready
[342251.835328] br-lan: port 3(phy0-ap0) entered blocking state
[342251.841126] br-lan: port 3(phy0-ap0) entered forwarding state
[342264.246171] ksmbd: The ksmbd server is experimental, use at your own risk.
[345613.282588] br-wan: port 1(eth0.2) entered disabled state
[345613.303420] br-wan: port 1(eth0.2) entered blocking state
[345613.309105] br-wan: port 1(eth0.2) entered listening state
[345621.837061] br-wan: port 1(eth0.2) entered learning state
[345630.156962] br-wan: port 1(eth0.2) entered forwarding state
[345630.162759] br-wan: topology change detected, propagating
[367212.424568] br-wan: port 1(eth0.2) entered disabled state
[367212.444404] br-wan: port 1(eth0.2) entered blocking state
[367212.450094] br-wan: port 1(eth0.2) entered listening state
[367220.966771] br-wan: port 1(eth0.2) entered learning state
[367229.286660] br-wan: port 1(eth0.2) entered forwarding state
[367229.292463] br-wan: topology change detected, propagating
[388812.466922] br-wan: port 1(eth0.2) entered disabled state
[388812.489492] br-wan: port 1(eth0.2) entered blocking state
[388812.495178] br-wan: port 1(eth0.2) entered listening state
[388820.740184] br-wan: port 1(eth0.2) entered learning state
[388829.060095] br-wan: port 1(eth0.2) entered forwarding state
[388829.065886] br-wan: topology change detected, propagating
23 2022-11-28 23:01:48
Odp: Netgear r6220 sieć wifi utrata połączenia (8 odpowiedzi, napisanych Oprogramowanie / Software)
A przy okazji w tym przypadku wndr3700
[ 46.287113] br-lan: port 2(wlan0) entered blocking state
[ 46.292430] br-lan: port 2(wlan0) entered disabled state
[ 46.298095] device wlan0 entered promiscuous mode
[ 48.838332] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 48.844914] br-lan: port 2(wlan0) entered blocking state
[ 48.850220] br-lan: port 2(wlan0) entered listening state
[ 50.913640] br-lan: port 2(wlan0) entered learning state
[ 52.993640] br-lan: port 2(wlan0) entered forwarding state
[ 52.999121] br-lan: topology change detected, propagating
[1324709.199458] device wlan0 left promiscuous mode
[1324709.204234] br-lan: port 2(wlan0) entered disabled state
[1324710.199570] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1324710.256589] br-lan: port 2(wlan0) entered blocking state
[1324710.262075] br-lan: port 2(wlan0) entered disabled state
[1324710.268008] device wlan0 entered promiscuous mode
[1324710.272976] br-lan: port 2(wlan0) entered blocking state
[1324710.278502] br-lan: port 2(wlan0) entered listening state
[1324710.433828] br-lan: port 2(wlan0) entered disabled state
[1324712.311894] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[1324712.318658] br-lan: port 2(wlan0) entered blocking state
[1324712.324184] br-lan: port 2(wlan0) entered listening state
[1324714.353711] br-lan: port 2(wlan0) entered learning state
[1324716.433691] br-lan: port 2(wlan0) entered forwarding state
[1324716.439363] br-lan: topology change detected, propagating
[3134956.316349] device wlan0 left promiscuous mode
[3134956.321154] br-lan: port 2(wlan0) entered disabled state
[3134959.409564] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[3134959.475634] br-lan: port 2(wlan0) entered blocking state
[3134959.481184] br-lan: port 2(wlan0) entered disabled state
[3134959.486952] device wlan0 entered promiscuous mode
[3134960.038058] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[3134960.044804] br-lan: port 2(wlan0) entered blocking state
[3134960.050328] br-lan: port 2(wlan0) entered listening state
[3134962.059548] br-lan: port 2(wlan0) entered learning state
[3134964.139537] br-lan: port 2(wlan0) entered forwarding state
[3134964.145219] br-lan: topology change detected, propagating
[3318311.797471] br-lan: port 2(wlan0) entered disabled state
[3318311.803140] br-lan: port 1(eth0) entered disabled state
[3318311.827494] device eth0 left promiscuous mode
[3318311.832217] br-lan: port 1(eth0) entered disabled state
[3318311.842482] eth0: link down
[3318311.876326] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[3318311.882522] device wlan0 left promiscuous mode
[3318311.887223] br-lan: port 2(wlan0) entered disabled state
[3318311.924421] eth0: link up (1000Mbps/Full duplex)
[3318311.929895] br-lan: port 1(eth0) entered blocking state
[3318311.935396] br-lan: port 1(eth0) entered disabled state
[3318311.941060] device eth0 entered promiscuous mode
[3318312.075379] br-lan: port 2(wlan0) entered blocking state
[3318312.080866] br-lan: port 2(wlan0) entered disabled state
[3318312.086752] device wlan0 entered promiscuous mode
[3318312.114567] br-lan: port 2(wlan0) entered blocking state
[3318312.120057] br-lan: port 2(wlan0) entered forwarding state
[3318312.125868] br-lan: port 1(eth0) entered blocking state
[3318312.131260] br-lan: port 1(eth0) entered forwarding state
[3365532.529150] device wlan0 left promiscuous mode
[3365532.533963] br-lan: port 2(wlan0) entered disabled state
[3365533.528405] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[3365533.586035] br-lan: port 2(wlan0) entered blocking state
[3365533.591524] br-lan: port 2(wlan0) entered disabled state
[3365533.597356] device wlan0 entered promiscuous mode
[3365533.602361] br-lan: port 2(wlan0) entered blocking state
[3365533.607883] br-lan: port 2(wlan0) entered forwarding state
[3365533.772715] br-lan: port 2(wlan0) entered disabled state
[3365534.040374] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[3365534.047117] br-lan: port 2(wlan0) entered blocking state
[3365534.052597] br-lan: port 2(wlan0) entered forwarding state
24 2022-11-28 22:20:03
Odp: Netgear r6220 sieć wifi utrata połączenia (8 odpowiedzi, napisanych Oprogramowanie / Software)
Niestety nie mam innej możliwości ? Internet muszę udostępnić radiowo do tego routera a dalej muszę udostępnić połączenie dla kamery i innych urządzeń
25 2022-11-28 22:04:06
Odp: Netgear r6220 sieć wifi utrata połączenia (8 odpowiedzi, napisanych Oprogramowanie / Software)
Sięgam więc wyżej czy wszystko jest w porządku ?
5670.546095] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 5670.726150] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[ 5670.739586] br-lan: port 5(wlan0-1) entered blocking state
[ 5670.751247] br-lan: port 5(wlan0-1) entered forwarding state
[ 5754.578091] device wlan0 entered promiscuous mode
[ 5754.787835] br-lan: port 5(wlan0-1) entered disabled state
[ 5755.138694] wlan0: deauthenticating from 14:4d:67:10:71:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 5758.345789] br-lan: port 5(wlan0-1) entered blocking state
[ 5758.356852] br-lan: port 5(wlan0-1) entered disabled state
[ 5758.368353] device wlan0-1 entered promiscuous mode
[ 5758.378346] br-lan: port 5(wlan0-1) entered blocking state
[ 5758.389385] br-lan: port 5(wlan0-1) entered forwarding state
[ 5758.405195] br-lan: port 5(wlan0-1) entered disabled state
[ 5762.233272] wlan0: authenticate with 14:4d:67:10:71:c8
[ 5762.250943] wlan0: send auth to 14:4d:67:10:71:c8 (try 1/3)
[ 5762.263638] wlan0: authenticated
[ 5762.271672] wlan0: associating with AP with corrupt beacon
[ 5762.282787] wlan0: associate with 14:4d:67:10:71:c8 (try 1/3)
[ 5762.298849] wlan0: RX AssocResp from 14:4d:67:10:71:c8 (capab=0x411 status=0 aid=1)
[ 5762.315050] wlan0: associated
[ 5762.415122] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 5762.595598] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[ 5762.609079] br-lan: port 5(wlan0-1) entered blocking state
[ 5762.620464] br-lan: port 5(wlan0-1) entered forwarding state
[ 6041.915872] device wlan0 entered promiscuous mode
[ 6042.164201] br-lan: port 5(wlan0-1) entered disabled state
[ 6042.536254] wlan0: deauthenticating from 14:4d:67:10:71:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6045.065078] br-lan: port 5(wlan0-1) entered blocking state
[ 6045.076125] br-lan: port 5(wlan0-1) entered disabled state
[ 6045.087642] device wlan0-1 entered promiscuous mode
[ 6045.097792] br-lan: port 5(wlan0-1) entered blocking state
[ 6045.108771] br-lan: port 5(wlan0-1) entered forwarding state
[ 6045.121821] br-lan: port 5(wlan0-1) entered disabled state
[ 6050.050475] wlan0: authenticate with 14:4d:67:10:71:c8
[ 6050.068219] wlan0: send auth to 14:4d:67:10:71:c8 (try 1/3)
[ 6050.083162] wlan0: authenticated
[ 6050.090531] wlan0: associating with AP with corrupt beacon
[ 6050.102214] wlan0: associate with 14:4d:67:10:71:c8 (try 1/3)
[ 6050.120542] wlan0: RX AssocResp from 14:4d:67:10:71:c8 (capab=0x411 status=0 aid=1)
[ 6050.136590] wlan0: associated
[ 6051.191985] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6051.362557] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[ 6051.375986] br-lan: port 5(wlan0-1) entered blocking state
[ 6051.387383] br-lan: port 5(wlan0-1) entered forwarding state
[49995.358450] device wlan0 entered promiscuous mode
[49995.565317] br-lan: port 5(wlan0-1) entered disabled state
[49995.968608] wlan0: deauthenticating from 14:4d:67:10:71:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[49998.976089] br-lan: port 5(wlan0-1) entered blocking state
[49998.987106] br-lan: port 5(wlan0-1) entered disabled state
[49998.998712] device wlan0-1 entered promiscuous mode
[49999.008708] br-lan: port 5(wlan0-1) entered blocking state
[49999.019717] br-lan: port 5(wlan0-1) entered forwarding state
[49999.035934] br-lan: port 5(wlan0-1) entered disabled state
[50001.863078] wlan0: authenticate with 14:4d:67:10:71:c8
[50001.880843] wlan0: send auth to 14:4d:67:10:71:c8 (try 1/3)
[50001.895711] wlan0: authenticated
[50001.903083] wlan0: associating with AP with corrupt beacon
[50001.914169] wlan0: associate with 14:4d:67:10:71:c8 (try 1/3)
[50001.930191] wlan0: RX AssocResp from 14:4d:67:10:71:c8 (capab=0x411 status=0 aid=1)
[50001.945792] wlan0: associated
[50002.054930] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[50002.225361] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[50002.238762] br-lan: port 5(wlan0-1) entered blocking state
[50002.250153] br-lan: port 5(wlan0-1) entered forwarding state
[50174.407412] device wlan0 entered promiscuous mode
[50174.615412] br-lan: port 5(wlan0-1) entered disabled state
[50174.966991] wlan0: deauthenticating from 14:4d:67:10:71:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[50178.255155] br-lan: port 5(wlan0-1) entered blocking state
[50178.266169] br-lan: port 5(wlan0-1) entered disabled state
[50178.277699] device wlan0-1 entered promiscuous mode
[50182.071600] wlan0: authenticate with 14:4d:67:10:71:c8
[50182.089308] wlan0: send auth to 14:4d:67:10:71:c8 (try 1/3)
[50182.102023] wlan0: authenticated
[50182.110011] wlan0: associating with AP with corrupt beacon
[50182.121724] wlan0: associate with 14:4d:67:10:71:c8 (try 1/3)
[50182.141748] wlan0: RX AssocResp from 14:4d:67:10:71:c8 (capab=0x411 status=0 aid=1)
[50182.158012] wlan0: associated
[50182.303320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[50182.473700] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[50182.487393] br-lan: port 5(wlan0-1) entered blocking state
[50182.498838] br-lan: port 5(wlan0-1) entered forwarding state
[50892.662895] device wlan0 entered promiscuous mode
[50892.681728] br-lan: port 5(wlan0-1) entered disabled state
[50893.262636] wlan0: deauthenticating from 14:4d:67:10:71:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[50896.256630] br-lan: port 5(wlan0-1) entered blocking state
[50896.267698] br-lan: port 5(wlan0-1) entered disabled state
[50896.279310] device wlan0-1 entered promiscuous mode
[50896.289458] br-lan: port 5(wlan0-1) entered blocking state
[50896.300431] br-lan: port 5(wlan0-1) entered forwarding state
[50896.313449] br-lan: port 5(wlan0-1) entered disabled state
[50901.086580] wlan0: authenticate with 14:4d:67:10:71:c8
[50901.104307] wlan0: send auth to 14:4d:67:10:71:c8 (try 1/3)
[50901.116984] wlan0: authenticated
[50901.124410] wlan0: associating with AP with corrupt beacon
[50901.135887] wlan0: associate with 14:4d:67:10:71:c8 (try 1/3)
[50901.152266] wlan0: RX AssocResp from 14:4d:67:10:71:c8 (capab=0x411 status=0 aid=1)
[50901.168474] wlan0: associated
[50901.268737] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[50901.469348] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[50901.482805] br-lan: port 5(wlan0-1) entered blocking state
[50901.494220] br-lan: port 5(wlan0-1) entered forwarding state
[124794.624522] device wlan0 entered promiscuous mode
[152964.075705] br-lan: port 5(wlan0-1) entered disabled state
[152964.678600] br-lan: port 5(wlan0-1) entered blocking state
[152964.689839] br-lan: port 5(wlan0-1) entered forwarding state
[152964.963717] wlan0: authenticate with 14:4d:67:10:71:c8
[152964.974652] wlan0: send auth to 14:4d:67:10:71:c8 (try 1/3)
[152964.990962] wlan0: authenticated
[152964.999368] wlan0: associating with AP with corrupt beacon
[152965.011297] wlan0: associate with 14:4d:67:10:71:c8 (try 1/3)
[152965.029210] wlan0: RX AssocResp from 14:4d:67:10:71:c8 (capab=0x411 status=0 aid=1)
[152965.044992] wlan0: associated
[152965.085639] br-lan: port 5(wlan0-1) entered disabled state
[152965.338013] br-lan: port 5(wlan0-1) entered blocking state
[152965.349225] br-lan: port 5(wlan0-1) entered forwarding state
[158104.255465] br-lan: port 5(wlan0-1) entered disabled state
[158104.955162] wlan0: deauthenticating from 14:4d:67:10:71:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[158107.448868] br-lan: port 5(wlan0-1) entered blocking state
[158107.460104] br-lan: port 5(wlan0-1) entered disabled state
[158107.471771] device wlan0-1 entered promiscuous mode
[158107.481930] br-lan: port 5(wlan0-1) entered blocking state
[158107.493121] br-lan: port 5(wlan0-1) entered forwarding state
[158107.519949] br-lan: port 5(wlan0-1) entered disabled state
[158117.179492] wlan0: authenticate with 14:4d:67:10:71:c8
[158117.197448] wlan0: send auth to 14:4d:67:10:71:c8 (try 1/3)
[158117.210861] wlan0: authenticated
[158117.218459] wlan0: associating with AP with corrupt beacon
[158117.229685] wlan0: associate with 14:4d:67:10:71:c8 (try 1/3)
[158117.250751] wlan0: RX AssocResp from 14:4d:67:10:71:c8 (capab=0x411 status=0 aid=1)
[158117.266484] wlan0: associated
[158117.370880] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[158117.541264] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[158117.554846] br-lan: port 5(wlan0-1) entered blocking state
[158117.566470] br-lan: port 5(wlan0-1) entered forwarding state
[160823.151096] device wlan0 entered promiscuous mode
Znalezione posty: 1 do 25 z 61
eko.one.pl → Posty przez michalik
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc