• Zarejestrowany: 2021-05-23
  • Posty: 63

Temat: Netgear r6220 sieć wifi utrata połączenia

Witam czy ktoś może mi wyjaśnić co oznaczają takie logi kernela

br-lan: port 5(wlan0-1) entered disabled state
[152965.338013] br-lan: port 5(wlan0-1) entered blocking state
[152965.349225] br-lan: port 5(wlan0-1) entered forwarding

Wlan0-1 to połączenie radiowe z innym routerem dostawcy internetu

Problem jest ogólnie kamera wifi czasem wypada traci połączenie

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,053

Odp: Netgear r6220 sieć wifi utrata połączenia

Wcześniej pewnie będziesz miał informacje o zerwaniu i ponownym połączeniu. Uruchamia się po prostu.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez michalik

  • Zarejestrowany: 2021-05-23
  • Posty: 63

Odp: Netgear r6220 sieć wifi utrata połączenia

Sięgam więc wyżej czy wszystko jest w porządku ?

5670.546095] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 5670.726150] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[ 5670.739586] br-lan: port 5(wlan0-1) entered blocking state
[ 5670.751247] br-lan: port 5(wlan0-1) entered forwarding state
[ 5754.578091] device wlan0 entered promiscuous mode
[ 5754.787835] br-lan: port 5(wlan0-1) entered disabled state
[ 5755.138694] wlan0: deauthenticating from 14:4d:67:10:71:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 5758.345789] br-lan: port 5(wlan0-1) entered blocking state
[ 5758.356852] br-lan: port 5(wlan0-1) entered disabled state
[ 5758.368353] device wlan0-1 entered promiscuous mode
[ 5758.378346] br-lan: port 5(wlan0-1) entered blocking state
[ 5758.389385] br-lan: port 5(wlan0-1) entered forwarding state
[ 5758.405195] br-lan: port 5(wlan0-1) entered disabled state
[ 5762.233272] wlan0: authenticate with 14:4d:67:10:71:c8
[ 5762.250943] wlan0: send auth to 14:4d:67:10:71:c8 (try 1/3)
[ 5762.263638] wlan0: authenticated
[ 5762.271672] wlan0: associating with AP with corrupt beacon
[ 5762.282787] wlan0: associate with 14:4d:67:10:71:c8 (try 1/3)
[ 5762.298849] wlan0: RX AssocResp from 14:4d:67:10:71:c8 (capab=0x411 status=0 aid=1)
[ 5762.315050] wlan0: associated
[ 5762.415122] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 5762.595598] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[ 5762.609079] br-lan: port 5(wlan0-1) entered blocking state
[ 5762.620464] br-lan: port 5(wlan0-1) entered forwarding state
[ 6041.915872] device wlan0 entered promiscuous mode
[ 6042.164201] br-lan: port 5(wlan0-1) entered disabled state
[ 6042.536254] wlan0: deauthenticating from 14:4d:67:10:71:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6045.065078] br-lan: port 5(wlan0-1) entered blocking state
[ 6045.076125] br-lan: port 5(wlan0-1) entered disabled state
[ 6045.087642] device wlan0-1 entered promiscuous mode
[ 6045.097792] br-lan: port 5(wlan0-1) entered blocking state
[ 6045.108771] br-lan: port 5(wlan0-1) entered forwarding state
[ 6045.121821] br-lan: port 5(wlan0-1) entered disabled state
[ 6050.050475] wlan0: authenticate with 14:4d:67:10:71:c8
[ 6050.068219] wlan0: send auth to 14:4d:67:10:71:c8 (try 1/3)
[ 6050.083162] wlan0: authenticated
[ 6050.090531] wlan0: associating with AP with corrupt beacon
[ 6050.102214] wlan0: associate with 14:4d:67:10:71:c8 (try 1/3)
[ 6050.120542] wlan0: RX AssocResp from 14:4d:67:10:71:c8 (capab=0x411 status=0 aid=1)
[ 6050.136590] wlan0: associated
[ 6051.191985] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6051.362557] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[ 6051.375986] br-lan: port 5(wlan0-1) entered blocking state
[ 6051.387383] br-lan: port 5(wlan0-1) entered forwarding state
[49995.358450] device wlan0 entered promiscuous mode
[49995.565317] br-lan: port 5(wlan0-1) entered disabled state
[49995.968608] wlan0: deauthenticating from 14:4d:67:10:71:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[49998.976089] br-lan: port 5(wlan0-1) entered blocking state
[49998.987106] br-lan: port 5(wlan0-1) entered disabled state
[49998.998712] device wlan0-1 entered promiscuous mode
[49999.008708] br-lan: port 5(wlan0-1) entered blocking state
[49999.019717] br-lan: port 5(wlan0-1) entered forwarding state
[49999.035934] br-lan: port 5(wlan0-1) entered disabled state
[50001.863078] wlan0: authenticate with 14:4d:67:10:71:c8
[50001.880843] wlan0: send auth to 14:4d:67:10:71:c8 (try 1/3)
[50001.895711] wlan0: authenticated
[50001.903083] wlan0: associating with AP with corrupt beacon
[50001.914169] wlan0: associate with 14:4d:67:10:71:c8 (try 1/3)
[50001.930191] wlan0: RX AssocResp from 14:4d:67:10:71:c8 (capab=0x411 status=0 aid=1)
[50001.945792] wlan0: associated
[50002.054930] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[50002.225361] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[50002.238762] br-lan: port 5(wlan0-1) entered blocking state
[50002.250153] br-lan: port 5(wlan0-1) entered forwarding state
[50174.407412] device wlan0 entered promiscuous mode
[50174.615412] br-lan: port 5(wlan0-1) entered disabled state
[50174.966991] wlan0: deauthenticating from 14:4d:67:10:71:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[50178.255155] br-lan: port 5(wlan0-1) entered blocking state
[50178.266169] br-lan: port 5(wlan0-1) entered disabled state
[50178.277699] device wlan0-1 entered promiscuous mode
[50182.071600] wlan0: authenticate with 14:4d:67:10:71:c8
[50182.089308] wlan0: send auth to 14:4d:67:10:71:c8 (try 1/3)
[50182.102023] wlan0: authenticated
[50182.110011] wlan0: associating with AP with corrupt beacon
[50182.121724] wlan0: associate with 14:4d:67:10:71:c8 (try 1/3)
[50182.141748] wlan0: RX AssocResp from 14:4d:67:10:71:c8 (capab=0x411 status=0 aid=1)
[50182.158012] wlan0: associated
[50182.303320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[50182.473700] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[50182.487393] br-lan: port 5(wlan0-1) entered blocking state
[50182.498838] br-lan: port 5(wlan0-1) entered forwarding state
[50892.662895] device wlan0 entered promiscuous mode
[50892.681728] br-lan: port 5(wlan0-1) entered disabled state
[50893.262636] wlan0: deauthenticating from 14:4d:67:10:71:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[50896.256630] br-lan: port 5(wlan0-1) entered blocking state
[50896.267698] br-lan: port 5(wlan0-1) entered disabled state
[50896.279310] device wlan0-1 entered promiscuous mode
[50896.289458] br-lan: port 5(wlan0-1) entered blocking state
[50896.300431] br-lan: port 5(wlan0-1) entered forwarding state
[50896.313449] br-lan: port 5(wlan0-1) entered disabled state
[50901.086580] wlan0: authenticate with 14:4d:67:10:71:c8
[50901.104307] wlan0: send auth to 14:4d:67:10:71:c8 (try 1/3)
[50901.116984] wlan0: authenticated
[50901.124410] wlan0: associating with AP with corrupt beacon
[50901.135887] wlan0: associate with 14:4d:67:10:71:c8 (try 1/3)
[50901.152266] wlan0: RX AssocResp from 14:4d:67:10:71:c8 (capab=0x411 status=0 aid=1)
[50901.168474] wlan0: associated
[50901.268737] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[50901.469348] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[50901.482805] br-lan: port 5(wlan0-1) entered blocking state
[50901.494220] br-lan: port 5(wlan0-1) entered forwarding state
[124794.624522] device wlan0 entered promiscuous mode
[152964.075705] br-lan: port 5(wlan0-1) entered disabled state
[152964.678600] br-lan: port 5(wlan0-1) entered blocking state
[152964.689839] br-lan: port 5(wlan0-1) entered forwarding state
[152964.963717] wlan0: authenticate with 14:4d:67:10:71:c8
[152964.974652] wlan0: send auth to 14:4d:67:10:71:c8 (try 1/3)
[152964.990962] wlan0: authenticated
[152964.999368] wlan0: associating with AP with corrupt beacon
[152965.011297] wlan0: associate with 14:4d:67:10:71:c8 (try 1/3)
[152965.029210] wlan0: RX AssocResp from 14:4d:67:10:71:c8 (capab=0x411 status=0 aid=1)
[152965.044992] wlan0: associated
[152965.085639] br-lan: port 5(wlan0-1) entered disabled state
[152965.338013] br-lan: port 5(wlan0-1) entered blocking state
[152965.349225] br-lan: port 5(wlan0-1) entered forwarding state
[158104.255465] br-lan: port 5(wlan0-1) entered disabled state
[158104.955162] wlan0: deauthenticating from 14:4d:67:10:71:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[158107.448868] br-lan: port 5(wlan0-1) entered blocking state
[158107.460104] br-lan: port 5(wlan0-1) entered disabled state
[158107.471771] device wlan0-1 entered promiscuous mode
[158107.481930] br-lan: port 5(wlan0-1) entered blocking state
[158107.493121] br-lan: port 5(wlan0-1) entered forwarding state
[158107.519949] br-lan: port 5(wlan0-1) entered disabled state
[158117.179492] wlan0: authenticate with 14:4d:67:10:71:c8
[158117.197448] wlan0: send auth to 14:4d:67:10:71:c8 (try 1/3)
[158117.210861] wlan0: authenticated
[158117.218459] wlan0: associating with AP with corrupt beacon
[158117.229685] wlan0: associate with 14:4d:67:10:71:c8 (try 1/3)
[158117.250751] wlan0: RX AssocResp from 14:4d:67:10:71:c8 (capab=0x411 status=0 aid=1)
[158117.266484] wlan0: associated
[158117.370880] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[158117.541264] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[158117.554846] br-lan: port 5(wlan0-1) entered blocking state
[158117.566470] br-lan: port 5(wlan0-1) entered forwarding state
[160823.151096] device wlan0 entered promiscuous mode

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,053

Odp: Netgear r6220 sieć wifi utrata połączenia

Rozłącza ci po prostu połączenie, a zrobiłeś tak że masz klienta i ap na jednym radiu. Jak klient sie rozłączy to potrafi się i AP psuć, bo to jedno radio.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez michalik

  • Zarejestrowany: 2021-05-23
  • Posty: 63

Odp: Netgear r6220 sieć wifi utrata połączenia

Niestety nie mam innej możliwości ? Internet muszę udostępnić radiowo do tego routera a dalej muszę udostępnić połączenie dla kamery i innych urządzeń

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,053

Odp: Netgear r6220 sieć wifi utrata połączenia

To kup sobie drugie urządzenie, zepnij się klientem na 5GHz jak jest możliwość lub kup dodatkową kartę sieciową na usb do tego routera.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez michalik

  • Zarejestrowany: 2021-05-23
  • Posty: 63

Odp: Netgear r6220 sieć wifi utrata połączenia

A przy okazji w tym przypadku wndr3700

[   46.287113] br-lan: port 2(wlan0) entered blocking state
[   46.292430] br-lan: port 2(wlan0) entered disabled state
[   46.298095] device wlan0 entered promiscuous mode
[   48.838332] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   48.844914] br-lan: port 2(wlan0) entered blocking state
[   48.850220] br-lan: port 2(wlan0) entered listening state
[   50.913640] br-lan: port 2(wlan0) entered learning state
[   52.993640] br-lan: port 2(wlan0) entered forwarding state
[   52.999121] br-lan: topology change detected, propagating
[1324709.199458] device wlan0 left promiscuous mode
[1324709.204234] br-lan: port 2(wlan0) entered disabled state
[1324710.199570] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1324710.256589] br-lan: port 2(wlan0) entered blocking state
[1324710.262075] br-lan: port 2(wlan0) entered disabled state
[1324710.268008] device wlan0 entered promiscuous mode
[1324710.272976] br-lan: port 2(wlan0) entered blocking state
[1324710.278502] br-lan: port 2(wlan0) entered listening state
[1324710.433828] br-lan: port 2(wlan0) entered disabled state
[1324712.311894] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[1324712.318658] br-lan: port 2(wlan0) entered blocking state
[1324712.324184] br-lan: port 2(wlan0) entered listening state
[1324714.353711] br-lan: port 2(wlan0) entered learning state
[1324716.433691] br-lan: port 2(wlan0) entered forwarding state
[1324716.439363] br-lan: topology change detected, propagating
[3134956.316349] device wlan0 left promiscuous mode
[3134956.321154] br-lan: port 2(wlan0) entered disabled state
[3134959.409564] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[3134959.475634] br-lan: port 2(wlan0) entered blocking state
[3134959.481184] br-lan: port 2(wlan0) entered disabled state
[3134959.486952] device wlan0 entered promiscuous mode
[3134960.038058] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[3134960.044804] br-lan: port 2(wlan0) entered blocking state
[3134960.050328] br-lan: port 2(wlan0) entered listening state
[3134962.059548] br-lan: port 2(wlan0) entered learning state
[3134964.139537] br-lan: port 2(wlan0) entered forwarding state
[3134964.145219] br-lan: topology change detected, propagating
[3318311.797471] br-lan: port 2(wlan0) entered disabled state
[3318311.803140] br-lan: port 1(eth0) entered disabled state
[3318311.827494] device eth0 left promiscuous mode
[3318311.832217] br-lan: port 1(eth0) entered disabled state
[3318311.842482] eth0: link down
[3318311.876326] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[3318311.882522] device wlan0 left promiscuous mode
[3318311.887223] br-lan: port 2(wlan0) entered disabled state
[3318311.924421] eth0: link up (1000Mbps/Full duplex)
[3318311.929895] br-lan: port 1(eth0) entered blocking state
[3318311.935396] br-lan: port 1(eth0) entered disabled state
[3318311.941060] device eth0 entered promiscuous mode
[3318312.075379] br-lan: port 2(wlan0) entered blocking state
[3318312.080866] br-lan: port 2(wlan0) entered disabled state
[3318312.086752] device wlan0 entered promiscuous mode
[3318312.114567] br-lan: port 2(wlan0) entered blocking state
[3318312.120057] br-lan: port 2(wlan0) entered forwarding state
[3318312.125868] br-lan: port 1(eth0) entered blocking state
[3318312.131260] br-lan: port 1(eth0) entered forwarding state
[3365532.529150] device wlan0 left promiscuous mode
[3365532.533963] br-lan: port 2(wlan0) entered disabled state
[3365533.528405] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[3365533.586035] br-lan: port 2(wlan0) entered blocking state
[3365533.591524] br-lan: port 2(wlan0) entered disabled state
[3365533.597356] device wlan0 entered promiscuous mode
[3365533.602361] br-lan: port 2(wlan0) entered blocking state
[3365533.607883] br-lan: port 2(wlan0) entered forwarding state
[3365533.772715] br-lan: port 2(wlan0) entered disabled state
[3365534.040374] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[3365534.047117] br-lan: port 2(wlan0) entered blocking state
[3365534.052597] br-lan: port 2(wlan0) entered forwarding state

8 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,053

Odp: Netgear r6220 sieć wifi utrata połączenia

Nic ciekawego. Porty dodawały się do bridge.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

9 Odpowiedź przez pablo.see

  • Skąd: Augustów
  • Zarejestrowany: 2010-10-18
  • Posty: 177

Odp: Netgear r6220 sieć wifi utrata połączenia

Xiaomi Router 3G i Netgear R6220 widzę mają podobne problemy z wifi. Może kwestia MT7621 a może układów wifi, bardziej jednak pewnie sterowniki od wifi. Może układy radiowe z AX lepiej działają.

Modem: Huawei HG8245Q2  (Servire.net)
Router: Xiaomi AX3000T,          Soft: OpenWrt 24.10-SNAPSHOT r29077-f415748