Jest coś takiego
root@Gargoyle:~# ps | grep mjpg
2767 root 1208 S grep mjpg Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
Opcje wyszukiwania (Strona 9 z 61)
eko.one.pl → Posty przez jarek7714
Znalezione posty: 201 do 225 z 1,504
201 2020-11-25 20:31:57
Odp: Instalacja mjpg-streamer Gargoyle 1.12.0 (36 odpowiedzi, napisanych Oprogramowanie / Software)
202 2020-11-25 20:27:46
Odp: Instalacja mjpg-streamer Gargoyle 1.12.0 (36 odpowiedzi, napisanych Oprogramowanie / Software)
IP mam ustawione na 192.168.22.1 (ale wcześniej zmieniałem także na 192.168.1.1 i też nie działał), próbuję wejść na 192.168.22.1:8080 ale nie otwiera się strona (nie świeci też dioda przy kamerze, jedynie port USB w routerze led wyświetla jako aktywny).
203 2020-11-25 20:20:54
Odp: Instalacja mjpg-streamer Gargoyle 1.12.0 (36 odpowiedzi, napisanych Oprogramowanie / Software)
root@Gargoyle:~# uci show mjpg-streamer
mjpg-streamer.core=mjpg-streamer
mjpg-streamer.core.input='uvc'
mjpg-streamer.core.output='http'
mjpg-streamer.core.device='/dev/video0'
mjpg-streamer.core.resolution='640x480'
mjpg-streamer.core.yuv='0'
mjpg-streamer.core.quality='80'
mjpg-streamer.core.fps='5'
mjpg-streamer.core.led='auto'
mjpg-streamer.core.www='/www/webcam'
mjpg-streamer.core.port='8080'
mjpg-streamer.core.username='openwrt'
mjpg-streamer.core.password='openwrt'
mjpg-streamer.core.enabled='1'
root@Gargoyle:~# ls /dev/video*
/dev/video0
root@Gargoyle:~# .
204 2020-11-25 20:14:43
Odp: Instalacja mjpg-streamer Gargoyle 1.12.0 (36 odpowiedzi, napisanych Oprogramowanie / Software)
Coś takiego
root@Gargoyle:~# logread
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 0.000000] Linux version 4.9.198 (eric@Osiris) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7897-9d401013fc) ) #0 Tue Nov 5 14:12:18 2019
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 0.000000] MyLoader: sysp=aaaa5554, boardp=aaaa5554, parts=aaaa5554
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] SoC: Atheros AR7161 rev 2
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] Determined physical RAM map:
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] memory: 04000000 @ 00000000 (usable)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Wed Nov 25 20:07:48 2020 kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Wed Nov 25 20:07:48 2020 kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] Zone ranges:
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] Movable zone start for each node
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] Early memory node ranges
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 0.000000] On node 0 totalpages: 16384
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 8047c7c4, node_mem_map 81000020
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 0.000000] Normal zone: 128 pages used for memmap
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 0.000000] Kernel command line: board=DIR-825-B1 console=ttyS0,115200 mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy) rootfstype=squashfs noinitrd
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] Memory: 59776K/65536K available (3235K kernel code, 168K rwdata, 808K rodata, 324K init, 205K bss, 5760K reserved, 0K cma-reserved)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] NR_IRQS:51
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] Clocks: CPU:680.000MHz, DDR:340.000MHz, AHB:170.000MHz, Ref:40.000MHz
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5621354254 ns
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.000008] sched_clock: 32 bits at 340MHz, resolution 2ns, wraps every 6316128254ns
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.007798] Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.070516] pid_max: default: 32768 minimum: 301
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.075215] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.081820] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.091042] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.100900] futex hash table entries: 256 (order: -1, 3072 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.107448] NET: Registered protocol family 16
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 0.113037] MIPS: machine is D-Link DIR-825 rev. B1
Wed Nov 25 20:07:48 2020 kern.warn kernel: [ 0.421290] registering PCI controller with io_map_base unset
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 2.578027] random: fast init done
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.818940] PCI host bridge to bus 0000:00
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.823048] pci_bus 0000:00: root bus resource [mem 0x10000000-0x16ffffff]
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.829948] pci_bus 0000:00: root bus resource [io 0x0000]
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.835508] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.842287] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 2.850237] pci 0000:00:11.0: [168c:ff1d] type 00 class 0x020000
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.850247] pci 0000:00:11.0: fixup device configuration
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 2.856772] pci 0000:00:11.0: reg 0x10: [mem 0x00000000-0x0000ffff]
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 2.856838] pci 0000:00:11.0: PME# supported from D0 D3hot
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 2.857023] pci 0000:00:12.0: [168c:ff1d] type 00 class 0x020000
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.857032] pci 0000:00:12.0: fixup device configuration
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 2.863547] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x0000ffff]
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 2.863604] pci 0000:00:12.0: PME# supported from D0 D3hot
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 2.863763] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.863788] pci 0000:00:11.0: BAR 0: assigned [mem 0x10000000-0x1000ffff]
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.870591] pci 0000:00:12.0: BAR 0: assigned [mem 0x10010000-0x1001ffff]
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.877377] pci 0000:00:11.0: using irq 40 for pin 1
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.882343] pci 0000:00:12.0: using irq 41 for pin 1
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.887875] clocksource: Switched to clocksource MIPS
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.893814] NET: Registered protocol family 2
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.898900] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.905868] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.912265] TCP: Hash tables configured (established 1024 bind 1024)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.918713] UDP hash table entries: 256 (order: 0, 4096 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.924547] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.931007] NET: Registered protocol family 1
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 2.935395] PCI: CLS 0 bytes, default 32
Wed Nov 25 20:07:48 2020 kern.warn kernel: [ 2.939311] Crashlog allocated RAM at address 0x3f00000
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.945440] workingset: timestamp_bits=30 max_order=14 bucket_order=0
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.957454] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.963308] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.980267] io scheduler noop registered
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.984184] io scheduler deadline registered (default)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.989683] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 2.996360] console [ttyS0] disabled
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.019993] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 10625000) is a 16550A
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.028704] console [ttyS0] enabled
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.035658] bootconsole [early0] disabled
Wed Nov 25 20:07:48 2020 kern.warn kernel: [ 3.046501] m25p80 spi0.0: found s25sl064a, expected m25p80
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.052128] m25p80 spi0.0: s25sl064a (8192 Kbytes)
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 3.056947] 6 cmdlinepart partitions found on MTD device spi0.0
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 3.062860] Creating 6 MTD partitions on "spi0.0":
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 3.067646] 0x000000000000-0x000000040000 : "uboot"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 3.074513] 0x000000040000-0x000000050000 : "config"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 3.081227] 0x000000050000-0x000000660000 : "firmware"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 3.096621] 2 uimage-fw partitions found on MTD device firmware
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 3.102563] 0x000000050000-0x0000001aad94 : "kernel"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 3.108875] 0x0000001aad94-0x000000660000 : "rootfs"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 3.115190] mtd: device 4 (rootfs) set to be root filesystem
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 3.120942] 1 squashfs-split partitions found on MTD device rootfs
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 3.127113] 0x000000520000-0x000000660000 : "rootfs_data"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 3.134278] 0x000000660000-0x000000670000 : "caldata"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 3.141082] 0x000000670000-0x000000800000 : "unknown"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 3.147811] 0x0000007f0000-0x000000800000 : "caldata_copy"
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 3.155354] Realtek RTL8366S ethernet switch driver version 0.2.2
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.161527] rtl8366s rtl8366s: using GPIO pins 5 (SDA) and 7 (SCK)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.167799] rtl8366s rtl8366s: RTL8366 ver. 1 chip found
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.197948] rtl8366s rtl8366s: applying initvals
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.234215] libphy: rtl8366s: probed
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.238418] libphy: Fixed MDIO Bus: probed
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.266766] libphy: ag71xx_mdio: probed
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.609552] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.949841] ag71xx ag71xx.1: connected to PHY at rtl8366s:04 [uid=001cc960, driver=Generic PHY]
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.959155] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:RGMII
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.966707] NET: Registered protocol family 10
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.974292] NET: Registered protocol family 17
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.978836] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 3.991853] 8021q: 802.1Q VLAN Support v1.8
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 4.002383] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 4.010450] Freeing unused kernel memory: 324K
Wed Nov 25 20:07:48 2020 kern.warn kernel: [ 4.014885] This architecture does not have kernel memory protection.
Wed Nov 25 20:07:48 2020 user.info kernel: [ 4.655904] init: Console is alive
Wed Nov 25 20:07:48 2020 user.info kernel: [ 4.659568] init: - watchdog -
Wed Nov 25 20:07:48 2020 user.info kernel: [ 6.093034] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.234799] usbcore: registered new interface driver usbfs
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.240410] usbcore: registered new interface driver hub
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.245784] usbcore: registered new device driver usb
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.255616] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 6.269671] SCSI subsystem initialized
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.277953] ehci-platform: EHCI generic platform driver
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.283253] ehci-platform ehci-platform: EHCI Host Controller
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.289047] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.297056] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.327917] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.334976] hub 1-0:1.0: USB hub found
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.339050] hub 1-0:1.0: 2 ports detected
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.345849] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.353407] ohci-platform: OHCI generic platform driver
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.358770] ohci-platform ohci-platform: Generic Platform OHCI controller
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.365562] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.373547] ohci-platform ohci-platform: irq 14, io mem 0x1c000000
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.452694] hub 2-0:1.0: USB hub found
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.456710] hub 2-0:1.0: 2 ports detected
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.472873] usbcore: registered new interface driver usb-storage
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 6.481105] usbcore: registered new interface driver uas
Wed Nov 25 20:07:48 2020 user.info kernel: [ 6.487003] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Wed Nov 25 20:07:48 2020 user.info kernel: [ 6.504655] init: - preinit -
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 7.010567] usb 1-1: new high-speed USB device number 2 using ehci-platform
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 7.336522] ar71xx: pll_reg 0xb8050010: 0x11110000
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 7.336540] eth0: link up (1000Mbps/Full duplex)
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 7.359431] random: procd: uninitialized urandom read (4 bytes read)
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 10.586566] jffs2: notice: (489) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Wed Nov 25 20:07:48 2020 user.info kernel: [ 10.604748] mount_root: switching to jffs2 overlay
Wed Nov 25 20:07:48 2020 user.warn kernel: [ 10.686594] urandom-seed: Seeding with /etc/urandom.seed
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 10.769924] eth0: link down
Wed Nov 25 20:07:48 2020 user.info kernel: [ 10.783886] procd: - early -
Wed Nov 25 20:07:48 2020 user.info kernel: [ 10.786846] procd: - watchdog -
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 11.315266] random: jshn: uninitialized urandom read (4 bytes read)
Wed Nov 25 20:07:48 2020 user.info kernel: [ 11.438956] procd: - watchdog -
Wed Nov 25 20:07:48 2020 user.info kernel: [ 11.442328] procd: - ubus -
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 11.660701] random: jshn: uninitialized urandom read (4 bytes read)
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 11.675817] random: ubusd: uninitialized urandom read (4 bytes read)
Wed Nov 25 20:07:48 2020 user.info kernel: [ 11.685210] procd: - init -
Wed Nov 25 20:07:48 2020 user.info kernel: [ 12.480700] kmodloader: loading kernel modules from /etc/modules.d/*
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 12.568272] tun: Universal TUN/TAP device driver, 1.6
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 12.573319] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 12.583873] gre: GRE over IPv4 demultiplexor driver
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 12.590785] ip_gre: GRE over IPv4 tunneling driver
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 12.611991] ip6_tables: (C) 2000-2006 Netfilter Core Team
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 12.822979] Linux video capture interface: v2.00
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 12.926908] u32 classifier
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 12.929671] input device check on
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 12.933324] Actions configured
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 12.953012] Mirror/redirect action on
Wed Nov 25 20:07:48 2020 kern.notice kernel: [ 13.003332] Bridge firewalling registered
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.013943] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.021984] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.105264] Ebtables v2.0 registered
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.146031] ip_tables: (C) 2000-2006 Netfilter Core Team
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.167253] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.348683] Netfilter messages via NETLINK v0.30.
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.416839] xt_time: kernel timezone is -0000
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.499367] ctnetlink v0.93: registering with nfnetlink.
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.516389] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.562974] PPP generic driver version 2.4.2
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.570563] PPP MPPE Compression module registered
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.577360] NET: Registered protocol family 24
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.583736] PPTP driver version 0.8.5
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.632975] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam HD-6000 for Notebooks (045e:076f)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.647400] input: Microsoft® LifeCam HD-6000 for as /devices/platform/ehci-platform/usb1/1-1/1-1:1.0/input/input0
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.658019] usbcore: registered new interface driver uvcvideo
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.663749] USB Video Class driver (1.1.1)
Wed Nov 25 20:07:48 2020 kern.warn kernel: [ 13.721396] PCI: Enabling device 0000:00:11.0 (0000 -> 0002)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.732268] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 13.741036] ath: EEPROM regdomain: 0x0
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 13.741041] ath: EEPROM indicates default country code should be used
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 13.741043] ath: doing EEPROM country->regdmn map search
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 13.741054] ath: country maps to regdmn code: 0x3a
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 13.741059] ath: Country alpha2 being used: US
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 13.741062] ath: Regpair used: 0x3a
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 13.754858] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.758137] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
Wed Nov 25 20:07:48 2020 kern.warn kernel: [ 13.843514] PCI: Enabling device 0000:00:12.0 (0000 -> 0002)
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.854433] ath: phy1: Ignoring endianness difference in EEPROM magic bytes.
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 13.863217] ath: EEPROM regdomain: 0x0
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 13.863221] ath: EEPROM indicates default country code should be used
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 13.863224] ath: doing EEPROM country->regdmn map search
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 13.863235] ath: country maps to regdmn code: 0x3a
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 13.863240] ath: Country alpha2 being used: US
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 13.863243] ath: Regpair used: 0x3a
Wed Nov 25 20:07:48 2020 kern.debug kernel: [ 13.879380] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Wed Nov 25 20:07:48 2020 kern.info kernel: [ 13.882526] ieee80211 phy1: Atheros AR9280 Rev:2 mem=0xb0010000, irq=41
Wed Nov 25 20:07:48 2020 user.info kernel: [ 13.914154] kmodloader: done loading kernel modules from /etc/modules.d/*
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .bit
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .glue
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .parody
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .dyn
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .bbs
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .free
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .fur
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .geek
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .gopher
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .indy
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .ing
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .null
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .oss
Wed Nov 25 20:07:48 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain .micro
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: started, version 2.80 cachesize 150
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: DNS service limited to local subnets
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using local addresses only for domain test
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using local addresses only for domain onion
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using local addresses only for domain localhost
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using local addresses only for domain local
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using local addresses only for domain invalid
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using local addresses only for domain bind
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain micro
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain micro
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain micro
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain oss
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain oss
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain oss
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain null
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain null
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain null
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain ing
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain ing
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain ing
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain indy
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain indy
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain indy
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain gopher
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain gopher
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain gopher
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain geek
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain geek
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain geek
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain fur
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain fur
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain fur
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain free
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain free
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain free
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.142.171.235#53 for domain bbs
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 95.211.32.162#53 for domain bbs
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using nameserver 66.244.95.20#53 for domain bbs
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: using 12 more nameservers
Wed Nov 25 20:07:49 2020 daemon.warn dnsmasq[1168]: no servers found in /tmp/resolv.conf.auto, will retry
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: read /etc/hosts - 5 addresses
Wed Nov 25 20:07:49 2020 daemon.info dnsmasq[1168]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Wed Nov 25 20:07:50 2020 authpriv.info dropbear[1195]: Not backgrounding
Wed Nov 25 20:07:52 2020 kern.info kernel: [ 19.337941] rtl8366s rtl8366s: applying initvals
Wed Nov 25 20:07:52 2020 user.notice : Added device handler type: tunnel
Wed Nov 25 20:07:52 2020 user.notice : Added device handler type: Network device
Wed Nov 25 20:07:52 2020 user.notice : Added device handler type: bridge
Wed Nov 25 20:07:52 2020 user.notice : Added device handler type: veth
Wed Nov 25 20:07:52 2020 user.notice : Added device handler type: macvlan
Wed Nov 25 20:07:52 2020 user.notice : Added device handler type: 8021ad
Wed Nov 25 20:07:52 2020 user.notice : Added device handler type: 8021q
Wed Nov 25 20:07:54 2020 kern.debug kernel: [ 22.038778] ar71xx: pll_reg 0xb8050010: 0x11110000.
205 2020-11-25 19:47:47
Odp: Instalacja mjpg-streamer Gargoyle 1.12.0 (36 odpowiedzi, napisanych Oprogramowanie / Software)
Włączam wg poradnika z eko ale nie działa 
206 2020-11-25 19:32:59
Odp: Instalacja mjpg-streamer Gargoyle 1.12.0 (36 odpowiedzi, napisanych Oprogramowanie / Software)
Mam coś takiego
root@Gargoyle:~# ls /etc/config
dhcp mjpg-streamer qos_gargoyle webmon_gargoyle
dropbear network system wireless
firewall openvpn ubootenv
gargoyle openvpn_gargoyle uhttpd .
207 2020-11-25 19:30:02
Odp: Instalacja mjpg-streamer Gargoyle 1.12.0 (36 odpowiedzi, napisanych Oprogramowanie / Software)
Mam mjpg-streamer_r182-10_mips_24kc.ipk, jakim poleceniem sprawdzić konfig /etc/config mjpg-streamer?
208 2020-11-25 19:17:11
Odp: Instalacja mjpg-streamer Gargoyle 1.12.0 (36 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
W zależności od wersji jaką masz - albo uruchamiasz ręcznie albo w /etc/config musisz to sobie najpierw odblokować.
Mam dokładnie tą z linku (instalowałem poprzez wget/tmp), a jak to odblokować w /etc/config?
209 2020-11-25 19:10:57
Odp: Instalacja mjpg-streamer Gargoyle 1.12.0 (36 odpowiedzi, napisanych Oprogramowanie / Software)
Z Gargoyle nie mogę (25% flash mam zablokowane-mam firmware sysupgrade a nie fat), każdy KB pamięci jest ważny, a zainstalowałem już OpenVPN. Cezary zainstalowałem z podanego linku, ale mi nie działa, czy wymaga jakiegoś specjalnego uruchomienia? (wpisałem polecenia z instalacji https://eko.one.pl/?p=openwrt-webcam ).
210 2020-11-24 19:03:56
Temat: Instalacja mjpg-streamer Gargoyle 1.12.0 (36 odpowiedzi, napisanych Oprogramowanie / Software)
Próbuję w angielskiej wersji Gargoyle doinstalować mjpg-streamer, ale niestety nie ma dostępnego tego pakietu
opkg install mjpg-streamer
ERROR: No package named mjpg-streamer found, try updating your package lists . Czy można zainstalować go z innego źródła/jakiego?
Device Name:Gargoyle
Gargoyle Version:1.12.0
Model:D-Link DIR-825 rev. B1
Device Configuration:Gateway
Memory Usage:19MB / 58.6MB (32.4%)
Connections:27/4096
CPU Load Averages:0.00 / 0.00 / 0.00 (1/5/15 minutes 211 2020-11-18 16:59:26
Odp: DIR-825 za mało miejsca na aktualizację (33 odpowiedzi, napisanych Oprogramowanie / Software)
Ja tego nie ogarnę, mam 2 sztuki-może ktoś się zgłosi na priv i zrobi to odpłatnie? 
212 2020-11-17 20:59:53
Odp: DIR-825 za mało miejsca na aktualizację (33 odpowiedzi, napisanych Oprogramowanie / Software)
Nie mam pojęcia, w nim to mam taki miks zrobiony że masakra (tj. ta 1-wersja, druga to kupiona kiedyś używka z Allegro "prawie nie śmigana"-gdzie wszedł Twój soft open-wrt fat z tego wątku, ale nie mogłem się do niego wbić, bo wołał hasła którego teoretycznie nie powinno być, zaraz do niego spróbuję wrzucić). P.S Tu jest trochę inny komunikat-ale też woła danych kalibracyjnych...
root@Gargoyle:~# cd /tmp
root@Gargoyle:/tmp# wget http://users.atw.hu/vargalex/openwrt-ar71xx-generic-dir
-825-b1-fat-squashfs-sysupgrade.bin
Connecting to users.atw.hu (88.151.96.4:80)
openwrt-ar71xx-gener 100% |*******************************| 3008k 0:00:00 ETA
root@Gargoyle:/tmp# sysupgrade -i openwrt-ar71xx-generic-dir-825-b1-fat-squashfs
-sysupgrade.bin
Do you have a backup of the caldata partition? (y/N): y
Keep config files over reflash (Y/n): y
Edit config file list (y/N): n
Saving config files...
Sending TERM to remaining processes ... syslogd klogd hotplug2 ubusd netifd dnsmasq ntpd crond
Sending KILL to remaining processes ... crond
Switching to ramdisk...
Performing system upgrade...
no valid calibration data found in caldata
unable to backup calibration data .
213 2020-11-17 20:42:46
Odp: DIR-825 za mało miejsca na aktualizację (33 odpowiedzi, napisanych Oprogramowanie / Software)
Po wgraniu Twojego obrazu Gargoyle factory 1.6.2 woła kopii danych kalibracyjnych
root@Gargoyle:/tmp# sysupgrade -i openwrt-ar71xx-generic-dir-825-b1-fat-squashfs
-sysupgrade.bin
Do you have a backup of the caldata partition? (y/N): y
Keep config files over reflash (Y/n): y
Edit config file list (y/N): n
Saving config files...
Sending TERM to remaining processes ... syslogd klogd hotplug2 ubusd netifd dnsmasq ntpd crond
Sending KILL to remaining processes ... crond
Switching to ramdisk...
Performing system upgrade...
calibration data mismatch caldata:8f0df00dd96bd8fa58089910ade38d67 caldata_copy:a294ae924ced36ac2257f6f06902c84f
unable to backup calibration data
root@Gargoyle:/tmp# 214 2020-11-16 21:25:40
Odp: DIR-825 za mało miejsca na aktualizację (33 odpowiedzi, napisanych Oprogramowanie / Software)
W tym wyżej był fat-do którego nie mogłem się wbić ("nieprawidłowe hasło"). Router spisałem już na straty, ale z ciekawości spróbowałem wgrać Gargoyle 1.4 poprzez recovery D-Link na starym netbook z Windows XP i mimo że nie chciał wcześniej na MacOSX żadnej wersji systemu, to tutaj zaskoczył.Mam jeszcze 2 sztukę (było DD-WRT) i efekt jest identyczny. Obecnie wersja angielska Gargoyle 1.12.
215 2020-11-12 23:09:13
Odp: DIR-825 za mało miejsca na aktualizację (33 odpowiedzi, napisanych Oprogramowanie / Software)
Co jest nie tak w tym obrazie/routerze że nie chce wykonać aktualizacji?
root@Gargoyle:~# cd /tmp
root@Gargoyle:/tmp# wget http://users.atw.hu/vargalex/openwrt-ar71xx-generic-dir
-825-b1-fat-squashfs-sysupgrade.bin
Downloading 'http://users.atw.hu/vargalex/openwrt-ar71xx-generic-dir-825-b1-fat-squashfs-sysupgrade.bin'
Connecting to 88.151.96.4:80
Writing to 'openwrt-ar71xx-generic-dir-825-b1-fat-squashfs-sysupgrade.bin'
openwrt-ar71xx-gener 100% |*******************************| 3008k 0:00:00 ETA
Download completed (3080192 bytes)
root@Gargoyle:/tmp# sysupgrade -i openwrt-ar71xx-generic-dir-825-b1-fat-squashfs
-sysupgrade.bin
Image metadata not found
Do you have a backup of the caldata partition? (y/N): y
Keep config files over reflash (Y/n): y
Edit config file list (y/N): n
Saving config files...
Commencing upgrade. Closing all shell sessions.
Connection to 192.168.1.1 closed by remote host.
Connection to 192.168.1.1 closed.
[Proces zakończony]216 2020-01-20 18:32:52
Odp: DIR-825 za mało miejsca na aktualizację (33 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
No to u mnie nigdy nie było hasła w openwrt. Wprowadź do w failsafe i zobacz czy się do niego dostaniesz.
Niestety tutaj jest jakieś hasło, którego nie można wyzerować, po wprowadzeniu w failsafe odpowiada na ping, niestety do SSH ani telnetu nie można się zalogować
ssh: connect to host 192.168.1.1 port 22: Connection refused
[Proces zakończony] .
217 2020-01-17 12:55:50
Odp: DIR-825 za mało miejsca na aktualizację (33 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
Oficjalne 15.05? To tam jeszcze telnet może być, sprawdź.
Nie to z eko, link wyżej, telnet jest zablokowany. Dziwne to OpenWRT- niby działa przycisk resetu, ale i tak woła swojego hasła.
218 2020-01-17 03:23:40
Odp: DIR-825 za mało miejsca na aktualizację (33 odpowiedzi, napisanych Oprogramowanie / Software)
Zainstalowałem openwrt-15.05-ar71xx-generic-dir-825-b1-fat-squashfs-sysupgrade.bin, wszystko poszło za pierwszym razem. Niestety nie mogę się dostać do routera poprzez SSH aby zainstalować Luci (woła mi hasła?)
root@192.168.1.1's password:
Permission denied, please try again.
root@192.168.1.1's password:
Permission denied, please try again.
root@192.168.1.1's password:
root@192.168.1.1: Permission denied (publickey,password).
[Proces zakończony] . Da się coś z tym zrobić czy sprzęt do kosza?
219 2019-09-04 19:24:18
Odp: Netgear R6220 instalacje OpenWrt (634 odpowiedzi, napisanych Oprogramowanie / Software)
Dzięki, jak zwykle Cezary celnie potrafisz rozmawiać z tym linuxem 
. Ten poradnik instalacji jest "średni" dla laików, chyba Twój będzie lepszy 
R6220 login: admin
Password:
Welcome to
_______ _______ ___ __ ____ _ _ ___
| ___ \| __ || | |__|| \ | || | / /
| |___| || |__| || |__ __ | \| || |/ /
| _ /| _ || || || |\ || \
|__| \__\|__| |__||______||__||_| \____||_|\___\
=System Architecture Department=
#
# ls /mnt/shares/
U
#
# cd /mnt/shares/U
#
# mtd_write write gargoyle-1.11.0.4-ramips-mt7621-r6220-squashfs-rootfs.bin Root
fs
Unlocking Rootfs ...
Writing from gargoyle-1.11.0.4-ramips-mt7621-r6220-squashfs-rootfs.bin to Rootfs ... [w]
#
# mtd_write write gargoyle-1.11.0.4-ramips-mt7621-r6220-squashfs-kernel.bin Kern
el
Unlocking Kernel ...
Writing from gargoyle-1.11.0.4-ramips-mt7621-r6220-squashfs-kernel.bin to Kernel ... [w]
#
# reboot , zmienną może być wykrywana pamięć (u mnie jako "U") i oczywiście oprogramowanie. P.S Co jest z tymi routerami "nie halo"? Że są dostępne w cenie odzieży na wagę.
220 2019-09-04 18:52:48
Odp: Netgear R6220 instalacje OpenWrt (634 odpowiedzi, napisanych Oprogramowanie / Software)
Jest coś takiego
Password:
Welcome to
_______ _______ ___ __ ____ _ _ ___
| ___ \| __ || | |__|| \ | || | / /
| |___| || |__| || |__ __ | \| || |/ /
| _ /| _ || || || |\ || \
|__| \__\|__| |__||______||__||_| \____||_|\___\
=System Architecture Department=
#
# ls /mnt/shares/
U
#
# cd /mnt/shares/U
#
# mtd_write write gargoyle-1.11.0.4-ramips-mt7621-r6220-squashfs-rootfs.bin
Usage: mtd [<options> ...] <command> [<arguments> ...] <device>
The device is in the format of mtdX (eg: mtd4) or its label.
mtd recognizes these commands:
unlock unlock the device
erase erase all data on device
write <imagefile>|- write <imagefile> (use - for stdin) to device
Following options are available:
-q quiet mode (once: no [w] on writing,
twice: no status messages)
-r reboot after successful command
-e <device> erase <device> before executing the command
-v output writing info. (1 more -v would output HTML format.)
-o <num> file offset
-l <num> length in file
-w read after write action to check
Example: To write linux.trx to mtd4 labeled as linux and reboot afterwards
mtd -r write linux.trx linux
#
# mtd_write write gargoyle-1.11.0.4-ramips-mt7621-r6220-squashfs-kernel.bin
Usage: mtd [<options> ...] <command> [<arguments> ...] <device>
The device is in the format of mtdX (eg: mtd4) or its label.
mtd recognizes these commands:
unlock unlock the device
erase erase all data on device
write <imagefile>|- write <imagefile> (use - for stdin) to device
Following options are available:
-q quiet mode (once: no [w] on writing,
twice: no status messages)
-r reboot after successful command
-e <device> erase <device> before executing the command
-v output writing info. (1 more -v would output HTML format.)
-o <num> file offset
-l <num> length in file
-w read after write action to check
Example: To write linux.trx to mtd4 labeled as linux and reboot afterwards
mtd -r write linux.trx linux
#
# ls
gargoyle-1.11.0.4-ramips-mt7621-r6220-squashfs-kernel.bin
gargoyle-1.11.0.4-ramips-mt7621-r6220-squashfs-rootfs.bin221 2019-09-04 18:42:23
Odp: Netgear R6220 instalacje OpenWrt (634 odpowiedzi, napisanych Oprogramowanie / Software)
Zrobiłem taki myk
R6220 login: admin
Password:
Welcome to
_______ _______ ___ __ ____ _ _ ___
| ___ \| __ || | |__|| \ | || | / /
| |___| || |__| || |__ __ | \| || |/ /
| _ /| _ || || || |\ || \
|__| \__\|__| |__||______||__||_| \____||_|\___\
=System Architecture Department=
#
# ls /mnt/shares/
U
#
# cd /mnt/shares/U
#
# mtd_write write rootfs.bin Rootfs
getFileSize: No such file or directory
Couldn't open image file: rootfs.bin!
#
# mtd_write write gargoyle-1.11.0.4-ramips-mt7621-r6220-squashfs-rootfs.bin
Usage: mtd [<options> ...] <command> [<arguments> ...] <device>
The device is in the format of mtdX (eg: mtd4) or its label.
mtd recognizes these commands:
unlock unlock the device
erase erase all data on device
write <imagefile>|- write <imagefile> (use - for stdin) to device
Following options are available:
-q quiet mode (once: no [w] on writing,
twice: no status messages)
-r reboot after successful command
-e <device> erase <device> before executing the command
-v output writing info. (1 more -v would output HTML format.)
-o <num> file offset
-l <num> length in file
-w read after write action to check
Example: To write linux.trx to mtd4 labeled as linux and reboot afterwards
mtd -r write linux.trx linux
#
# mtd_write write gargoyle-1.11.0.4-ramips-mt7621-r6220-squashfs-kernel.bin
Usage: mtd [<options> ...] <command> [<arguments> ...] <device>
The device is in the format of mtdX (eg: mtd4) or its label.
mtd recognizes these commands:
unlock unlock the device
erase erase all data on device
write <imagefile>|- write <imagefile> (use - for stdin) to device
Following options are available:
-q quiet mode (once: no [w] on writing,
twice: no status messages)
-r reboot after successful command
-e <device> erase <device> before executing the command
-v output writing info. (1 more -v would output HTML format.)
-o <num> file offset
-l <num> length in file
-w read after write action to check
Example: To write linux.trx to mtd4 labeled as linux and reboot afterwards
mtd -r write linux.trx linux
#
#reboot i bez zmian?
222 2019-09-04 18:10:25
Odp: Netgear R6220 instalacje OpenWrt (634 odpowiedzi, napisanych Oprogramowanie / Software)
Coś mi nie wychodzi
# ls /mnt/shares/
U
#
# cd /mnt/shares/myUdisk
-sh: cd: can't cd to /mnt/shares/myUdisk
#
# mtd_write write rootfs.bin Rootfs
getFileSize: No such file or directory
Couldn't open image file: rootfs.bin!
#
# mtd_write write kernel.bin Kernel
getFileSize: No such file or directory
Couldn't open image file: kernel.bin!223 2019-09-04 17:56:29
Odp: Netgear R6220 instalacje OpenWrt (634 odpowiedzi, napisanych Oprogramowanie / Software)
Co robię nie tak że nie mogę zainstalować Gargoyle na ww routerze? Pendrive sformatowany pod windows XP jak jako FAT (widoczny poprzez oprogramowanie factory)
ls /mnt/shares/ to find out of your USB disk. 'myUdisk' for example.
ls: to: No such file or directory
ls: find: No such file or directory
ls: out: No such file or directory
ls: of: No such file or directory
ls: your: No such file or directory
ls: USB: No such file or directory
ls: disk.: No such file or directory
ls: myUdisk: No such file or directory
ls: for: No such file or directory
ls: example.: No such file or directory
/mnt/shares/:
U224 2019-05-02 20:24:57
Odp: D-Link DIR-825 B2 (26 odpowiedzi, napisanych Oprogramowanie / Software)
Ja w swoim egzemplarzu DIR-825 mam DD-WRT (innego softu nie przyjmuje, nawet przez recovery). Od jakiegoś czasu leży na półce (używam go zamiennie z TL WDR3600), choć ma lepsze radio to jestem skazany na TL ze względu na wręcz banalną konfigurację OpenVPN w Gargoyle.
225 2019-02-20 16:44:56
Odp: Intellus IC1 2xminiPCI GigabitEth JA76PF2 OpenWrt (9 odpowiedzi, napisanych Oprogramowanie / Software)
Niby wszystko ok (jak dla mnie "zielonego")
root@Gargoyle:~# ipconfig
-ash: ipconfig: not found
root@Gargoyle:~# ifconfig
br-lan Link encap:Ethernet HWaddr 00:15:61:90:5A:78
inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fdcb:ad4f:31cc::1/60 Scope:Global
inet6 addr: fe80::215:61ff:fe90:5a78/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:380566 errors:0 dropped:0 overruns:0 frame:0
TX packets:445490 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:107717569 (102.7 MiB) TX bytes:600254136 (572.4 MiB)
eth0 Link encap:Ethernet HWaddr 00:15:61:90:5A:78
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:380588 errors:0 dropped:0 overruns:0 frame:0
TX packets:445495 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:113049393 (107.8 MiB) TX bytes:600254554 (572.4 MiB)
Interrupt:4
eth1 Link encap:Ethernet HWaddr 00:15:61:90:5A:79
inet addr:192.168.55.166 Bcast:192.168.55.255 Mask:255.255.255.0
inet6 addr: fe80::215:61ff:fe90:5a79/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:440401 errors:0 dropped:0 overruns:0 frame:0
TX packets:373771 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:599477632 (571.7 MiB) TX bytes:112207526 (107.0 MiB)
Interrupt:5
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:178 errors:0 dropped:0 overruns:0 frame:0
TX packets:178 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:14280 (13.9 KiB) TX bytes:14280 (13.9 KiB) .
Znalezione posty: 201 do 225 z 1,504
eko.one.pl → Posty przez jarek7714
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc