AT^SETPORT?
^SETPORT:FF;12,16
OKczy te ustawienia są ok?
Strony Poprzednia 1 2 3 4 Następna
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
Opcje wyszukiwania (Strona 2 z 4)
eko.one.pl → Posty przez slawekw
Znalezione posty: 26 do 50 z 84
26 2020-11-15 20:03:29
Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP (21 odpowiedzi, napisanych Oprogramowanie / Software)
27 2020-11-15 20:01:17
Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP (21 odpowiedzi, napisanych Oprogramowanie / Software)
podpiąłem modem pod windowsa, windows ładnie instalauje dla niego sterownik i moge sie podpiac do sieci orange bez problemu.
podpialem sie też puttym na serial port ktory sie pojawia po wpięciu modemu do laptopa, tj.
c:\>mode
Stan urządzenia COM10:
----------------------
Szybkość transmisji: 0
Parzystość: None
Bity danych: 0
Bity stopu: 1
Limit czasu: OFF
XON/XOFF: OFF
Uzgadnianie CTS: OFF
Uzgadnianie DSR: OFF
Czułość DSR: OFF
Obwód DTR: ON
Obwód RTS: ONi kilka komend AT odpalilem ladnie pokazuja stan modemu:
^RSSI:24
^HCSQ:"LTE",57,47,96,18
^RSSI:24
^HCSQ:"LTE",57,46,106,16
^RSSI:26
^HCSQ:"LTE",60,47,91,12
^RSSI:24
^HCSQ:"LTE",57,46,101,16
^RSSI:25
^HCSQ:"LTE",58,46,96,14
^RSSI:24
^HCSQ:"LTE",57,46,96,14
^RSSI:25
^HCSQ:"LTE",58,47,86,16
^RSSI:25
^HCSQ:"LTE",58,46,91,14
^RSSI:25
^HCSQ:"LTE",59,47,91,14
OK
^RSSI:25
^HCSQ:"LTE",58,47,96,16
^RSSI:24
^HCSQ:"LTE",57,46,86,16
ATI
Manufacturer: huawei
Model: E3372
Revision: 21.180.01.00.00
IMEI: xxxxxxxxxxxxxxxxx
+GCAP: +CGSM,+DS,+ES
OK
^RSSI:25
^HCSQ:"LTE",58,47,101,16
AT^FHVER
^FHVER:"E3372H-153 21.180.01.00.00,CL2E3372HM Ver.A"
OK
^RSSI:24
^HCSQ:"LTE",57,47,96,18
^RSSI:24
^HCSQ:"LTE",57,47,96,16
AT^VERSION?
^VERSION:BDT:Sep 30 2014, 15:17:21
^VERSION:EXTS:21.180.01.00.00
^VERSION:INTS:
^VERSION:EXTD:WEBUI_17.100.06.00.03_Hilink_V7R2_9x25_CPIO
^VERSION:INTD:
^VERSION:EXTH:CL2E3372HM Ver.A
^VERSION:INTH:
^VERSION:EXTU:E3372
^VERSION:INTU:
^VERSION:CFG:1004
^VERSION:PRL:
^VERSION:OEM:
^VERSION:INI:
OK28 2020-11-15 17:50:00
Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP (21 odpowiedzi, napisanych Oprogramowanie / Software)
W którym miejsciu mogłyby one być wyłączone? Konfiguracja /etc/config/network jest taka jak w moim pierwszym poście.
Tylko z modem LTE nie dziala internet (pomimo ze widac status 3ginfo to zadne dane nie "latają" bo nie podnosi sie publiczne IP z Orange)
Jeśli zmienię w network to:
config interface 'lan'
option ifname 'wlan0'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.202.193'
option netmask '255.255.255.192'
config interface 'wan'
option ifname 'wwan0'
option device '/dev/cdc-wdm0'
option apn 'internet'
option proto 'ncm'
option delay '10'
option auto '1'na to:
config interface 'lan'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
config interface 'wan'
option proto 'dhcp'
option ifname 'eth1'i podepnę port Ethernet (wtedy WAN) do mojej sieci domowej, to internet dziala przez moj domowyh ISP ok.
29 2020-11-15 17:04:54
Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP (21 odpowiedzi, napisanych Oprogramowanie / Software)
root@dir505:~# logread
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.000000] Linux version 4.14.195 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11208-ce6496d796)) #0 Sun Sep 6 16:19:39 2020
Sun Nov 15 16:00:23 2020 kern.debug kernel: [ 0.000000] MyLoader: sysp=9ba9322f, boardp=42065c8a, parts=254dd0b6
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] SoC: Atheros AR9330 rev 1
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] Determined physical RAM map:
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] memory: 04000000 @ 00000000 (usable)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Sun Nov 15 16:00:23 2020 kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Sun Nov 15 16:00:23 2020 kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] Zone ranges:
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] Movable zone start for each node
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] Early memory node ranges
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Sun Nov 15 16:00:23 2020 kern.debug kernel: [ 0.000000] On node 0 totalpages: 16384
Sun Nov 15 16:00:23 2020 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 804ecd40, node_mem_map 81000020
Sun Nov 15 16:00:23 2020 kern.debug kernel: [ 0.000000] Normal zone: 128 pages used for memmap
Sun Nov 15 16:00:23 2020 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Sun Nov 15 16:00:23 2020 kern.debug kernel: [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.000000] random: get_random_bytes called from 0x804f0740 with crng_init=0
Sun Nov 15 16:00:23 2020 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Sun Nov 15 16:00:23 2020 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.000000] Kernel command line: board=DIR-505-A1 console=ttyATH0,115200 mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k@0x80000(firmware) rootfstype=squashfs noinitrd
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] Memory: 59320K/65536K available (3950K kernel code, 197K rwdata, 516K rodata, 320K init, 212K bss, 6216K reserved, 0K cma-reserved)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] NR_IRQS: 51
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.000013] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.007590] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.092190] pid_max: default: 32768 minimum: 301
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.096913] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.102970] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.112946] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.121056] futex hash table entries: 256 (order: -1, 3072 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.128579] NET: Registered protocol family 16
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.133439] MIPS: machine is D-Link DIR-505 rev. A1
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.679343] clocksource: Switched to clocksource MIPS
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.684343] NET: Registered protocol family 2
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.688493] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.693858] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.699919] TCP: Hash tables configured (established 1024 bind 1024)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.706167] UDP hash table entries: 256 (order: 0, 4096 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.711599] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.717839] NET: Registered protocol family 1
Sun Nov 15 16:00:23 2020 kern.debug kernel: [ 0.721748] PCI: CLS 0 bytes, default 32
Sun Nov 15 16:00:23 2020 kern.warn kernel: [ 0.726097] Crashlog allocated RAM at address 0x3f00000
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.731581] workingset: timestamp_bits=30 max_order=14 bucket_order=0
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.744142] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.748332] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.771006] io scheduler noop registered
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.773375] io scheduler deadline registered (default)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.778884] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.787520] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.795392] console [ttyATH0] enabled
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.802166] bootconsole [early0] disabled
Sun Nov 15 16:00:23 2020 kern.warn kernel: [ 0.818961] m25p80 spi0.0: found mx25l6405d, expected m25p80
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.824158] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.828081] 6 cmdlinepart partitions found on MTD device spi0.0
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.834000] Creating 6 MTD partitions on "spi0.0":
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.838726] 0x000000000000-0x000000010000 : "u-boot"
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.845694] 0x000000010000-0x000000020000 : "art"
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.851828] 0x000000020000-0x000000030000 : "mac"
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.857017] 0x000000030000-0x000000040000 : "nvram"
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.863310] 0x000000040000-0x000000080000 : "language"
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.868982] 0x000000080000-0x000000800000 : "firmware"
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.884854] 2 uimage-fw partitions found on MTD device firmware
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.889381] 0x000000080000-0x000000203990 : "kernel"
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.895361] 0x000000203990-0x000000800000 : "rootfs"
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.900321] mtd: device 7 (rootfs) set to be root filesystem
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.904903] 1 squashfs-split partitions found on MTD device rootfs
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 0.911119] 0x000000470000-0x000000800000 : "rootfs_data"
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.921766] libphy: Fixed MDIO Bus: probed
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 0.946138] libphy: ag71xx_mdio: probed
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 1.570850] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 1.612758] eth0: Atheros AG71xx at 0xba000000, irq 5, mode: gmii
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 2.241143] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 2.249731] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 2.257304] NET: Registered protocol family 10
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 2.266926] Segment Routing with IPv6
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 2.269268] NET: Registered protocol family 17
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 2.273727] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 2.287319] 8021q: 802.1Q VLAN Support v1.8
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 2.293044] hctosys: unable to open rtc device (rtc0)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 2.303426] VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 2.311563] Freeing unused kernel memory: 320K
Sun Nov 15 16:00:23 2020 kern.warn kernel: [ 2.314547] This architecture does not have kernel memory protection.
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 2.539368] random: fast init done
Sun Nov 15 16:00:23 2020 user.info kernel: [ 3.282670] init: Console is alive
Sun Nov 15 16:00:23 2020 user.info kernel: [ 3.284938] init: - watchdog -
Sun Nov 15 16:00:23 2020 user.info kernel: [ 4.769696] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 4.864454] usbcore: registered new interface driver usbfs
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 4.868631] usbcore: registered new interface driver hub
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 4.873997] usbcore: registered new device driver usb
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 4.885923] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 4.893281] ehci-platform: EHCI generic platform driver
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 4.897171] ehci-platform ehci-platform: EHCI Host Controller
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 4.902919] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 4.912850] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 4.939401] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 4.945310] hub 1-0:1.0: USB hub found
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 4.948505] hub 1-0:1.0: 1 port detected
Sun Nov 15 16:00:23 2020 user.info kernel: [ 4.953538] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Sun Nov 15 16:00:23 2020 user.info kernel: [ 4.970012] init: - preinit -
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 5.637771] usb 1-1: new high-speed USB device number 2 using ehci-platform
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 5.855335] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 5.896638] random: procd: uninitialized urandom read (4 bytes read)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 7.930861] eth1: link up (100Mbps/Full duplex)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 7.933983] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 9.351998] jffs2: notice: (436) jffs2_build_xattr_subsystem: complete building xattr subsystem, 14 of xdatum (3 unchecked, 11 orphan) and 49 of xref (10 dead, 2 orphan) found.
Sun Nov 15 16:00:23 2020 user.info kernel: [ 9.370710] mount_root: switching to jffs2 overlay
Sun Nov 15 16:00:23 2020 kern.warn kernel: [ 9.410766] overlayfs: upper fs does not support tmpfile.
Sun Nov 15 16:00:23 2020 user.warn kernel: [ 9.424433] urandom-seed: Seeding with /etc/urandom.seed
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 9.683109] eth1: link down
Sun Nov 15 16:00:23 2020 user.info kernel: [ 9.704313] procd: - early -
Sun Nov 15 16:00:23 2020 user.info kernel: [ 9.705891] procd: - watchdog -
Sun Nov 15 16:00:23 2020 user.info kernel: [ 10.544035] procd: - watchdog -
Sun Nov 15 16:00:23 2020 user.info kernel: [ 10.546110] procd: - ubus -
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 10.697939] random: jshn: uninitialized urandom read (4 bytes read)
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 10.917118] random: ubusd: uninitialized urandom read (4 bytes read)
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 10.924491] random: ubusd: uninitialized urandom read (4 bytes read)
Sun Nov 15 16:00:23 2020 user.info kernel: [ 11.009529] procd: - init -
Sun Nov 15 16:00:23 2020 user.info kernel: [ 13.195402] kmodloader: loading kernel modules from /etc/modules.d/*
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 13.471436] ip6_tables: (C) 2000-2006 Netfilter Core Team
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 13.514262] usbcore: registered new interface driver cdc_wdm
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 13.540950] Loading modules backported from Linux version v4.19.137-0-gc076c79e03c6
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 13.547156] Backport generated by backports.git v4.19.137-1-0-g60c3a249
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 13.593530] ip_tables: (C) 2000-2006 Netfilter Core Team
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 13.628146] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 13.940904] xt_time: kernel timezone is -0000
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 13.959511] usbcore: registered new interface driver cdc_ether
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 13.985949] usbcore: registered new interface driver cdc_ncm
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 14.193395] huawei_cdc_ncm 1-1:1.1: MAC-Address: 00:1e:10:1f:00:00
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 14.198141] huawei_cdc_ncm 1-1:1.1: setting rx_max = 16384
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 14.236670] huawei_cdc_ncm 1-1:1.1: NDP will be placed at end of frame for this device.
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 14.243619] huawei_cdc_ncm 1-1:1.1: cdc-wdm0: USB WDM device
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 14.250347] huawei_cdc_ncm 1-1:1.1 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform-1, Huawei CDC NCM device, 00:1e:10:1f:00:00
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 14.261192] usbcore: registered new interface driver huawei_cdc_ncm
Sun Nov 15 16:00:23 2020 user.info kernel: [ 14.337488] urngd: v1.0.2 started.
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 14.483235] PPP generic driver version 2.4.2
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 14.510853] NET: Registered protocol family 24
Sun Nov 15 16:00:23 2020 kern.debug kernel: [ 14.663596] ath: EEPROM regdomain: 0x0
Sun Nov 15 16:00:23 2020 kern.debug kernel: [ 14.663610] ath: EEPROM indicates default country code should be used
Sun Nov 15 16:00:23 2020 kern.debug kernel: [ 14.663615] ath: doing EEPROM country->regdmn map search
Sun Nov 15 16:00:23 2020 kern.debug kernel: [ 14.663635] ath: country maps to regdmn code: 0x3a
Sun Nov 15 16:00:23 2020 kern.debug kernel: [ 14.663643] ath: Country alpha2 being used: US
Sun Nov 15 16:00:23 2020 kern.debug kernel: [ 14.663648] ath: Regpair used: 0x3a
Sun Nov 15 16:00:23 2020 kern.debug kernel: [ 14.678414] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sun Nov 15 16:00:23 2020 kern.info kernel: [ 14.681435] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Sun Nov 15 16:00:23 2020 user.info kernel: [ 14.770037] kmodloader: done loading kernel modules from /etc/modules.d/*
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 15.356861] random: crng init done
Sun Nov 15 16:00:23 2020 kern.notice kernel: [ 15.358825] random: 6 urandom warning(s) missed due to ratelimiting
Sun Nov 15 16:00:27 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Sun Nov 15 16:00:27 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: started, version 2.80 cachesize 150
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: DNS service limited to local subnets
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: using local addresses only for domain test
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: using local addresses only for domain onion
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: using local addresses only for domain localhost
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: using local addresses only for domain local
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: using local addresses only for domain invalid
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: using local addresses only for domain bind
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: using local addresses only for domain lan
Sun Nov 15 16:00:28 2020 daemon.warn dnsmasq[1010]: no servers found in /tmp/resolv.conf.auto, will retry
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: read /etc/hosts - 4 addresses
Sun Nov 15 16:00:29 2020 daemon.info dnsmasq[1010]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Sun Nov 15 16:00:29 2020 authpriv.info dropbear[1062]: Not backgrounding
Sun Nov 15 16:00:32 2020 user.notice : Added device handler type: 8021ad
Sun Nov 15 16:00:32 2020 user.notice : Added device handler type: 8021q
Sun Nov 15 16:00:32 2020 user.notice : Added device handler type: macvlan
Sun Nov 15 16:00:32 2020 user.notice : Added device handler type: veth
Sun Nov 15 16:00:32 2020 user.notice : Added device handler type: bridge
Sun Nov 15 16:00:32 2020 user.notice : Added device handler type: Network device
Sun Nov 15 16:00:32 2020 user.notice : Added device handler type: tunnel
Sun Nov 15 16:00:36 2020 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Sun Nov 15 16:00:36 2020 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Sun Nov 15 16:00:36 2020 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Sun Nov 15 16:00:36 2020 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Sun Nov 15 16:00:36 2020 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Sun Nov 15 16:00:36 2020 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Sun Nov 15 16:00:37 2020 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Sun Nov 15 16:00:37 2020 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Sun Nov 15 16:00:38 2020 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Sun Nov 15 16:00:38 2020 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Sun Nov 15 16:00:38 2020 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Sun Nov 15 16:00:40 2020 daemon.warn netifd: You have delegated IPv6-prefixes but haven't assigned them to any interface. Did you forget to set option ip6assign on your lan-interfaces?
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'loopback' is enabled
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'loopback' is setting up now
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'loopback' is now up
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'wan' is enabled
Sun Nov 15 16:00:40 2020 kern.info kernel: [ 36.101207] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'lan' is enabled
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'lan' is setting up now
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'lan' is now up
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Network device 'lo' link is up
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'loopback' has link connectivity
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Network device 'wwan0' link is up
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'wan' has link connectivity
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'wan' is setting up now
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'wan' is now up
Sun Nov 15 16:00:41 2020 daemon.err odhcpd[1173]: Failed to send to ff02::1%lan@br-lan (Permission denied)
Sun Nov 15 16:00:42 2020 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sun Nov 15 16:00:43 2020 daemon.info procd: - init complete -
Sun Nov 15 16:00:44 2020 user.notice firewall: Reloading firewall due to ifup of wan (wwan0)
Sun Nov 15 16:00:45 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sun Nov 15 16:00:45 2020 kern.info kernel: [ 41.153492] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sun Nov 15 16:00:45 2020 kern.info kernel: [ 41.187391] br-lan: port 1(wlan0) entered blocking state
Sun Nov 15 16:00:45 2020 kern.info kernel: [ 41.191362] br-lan: port 1(wlan0) entered disabled state
Sun Nov 15 16:00:45 2020 kern.info kernel: [ 41.197030] device wlan0 entered promiscuous mode
Sun Nov 15 16:00:45 2020 daemon.err hostapd: Using interface wlan0 with hwaddr c8:d3:a3:5b:44:42 and ssid "dir-505"
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1010]: exiting on receipt of SIGTERM
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: started, version 2.80 cachesize 150
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: DNS service limited to local subnets
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: using local addresses only for domain test
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: using local addresses only for domain onion
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: using local addresses only for domain localhost
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: using local addresses only for domain local
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: using local addresses only for domain invalid
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: using local addresses only for domain bind
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: using local addresses only for domain lan
Sun Nov 15 16:00:46 2020 daemon.warn dnsmasq[1625]: no servers found in /tmp/resolv.conf.auto, will retry
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: read /etc/hosts - 4 addresses
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: read /etc/hosts - 4 addresses
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Sun Nov 15 16:00:46 2020 kern.info kernel: [ 42.405644] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sun Nov 15 16:00:46 2020 kern.info kernel: [ 42.411037] br-lan: port 1(wlan0) entered blocking state
Sun Nov 15 16:00:46 2020 kern.info kernel: [ 42.415853] br-lan: port 1(wlan0) entered forwarding state
Sun Nov 15 16:00:46 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sun Nov 15 16:00:46 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sun Nov 15 16:00:46 2020 daemon.notice netifd: bridge 'br-lan' link is up
Sun Nov 15 16:00:46 2020 daemon.notice netifd: Interface 'lan' has link connectivity
Sun Nov 15 16:00:46 2020 kern.info kernel: [ 42.439835] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Sun Nov 15 16:00:47 2020 daemon.notice netifd: Network device 'wlan0' link is up
Sun Nov 15 16:00:47 2020 daemon.err odhcpd[1173]: Failed to send to ff02::1%lan@br-lan (Address not available)
Sun Nov 15 16:00:50 2020 daemon.info hostapd: wlan0: STA 68:94:23:8b:95:8d IEEE 802.11: authenticated
Sun Nov 15 16:00:50 2020 daemon.info hostapd: wlan0: STA 68:94:23:8b:95:8d IEEE 802.11: associated (aid 1)
Sun Nov 15 16:00:50 2020 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 68:94:23:8b:95:8d
Sun Nov 15 16:00:50 2020 daemon.info hostapd: wlan0: STA 68:94:23:8b:95:8d WPA: pairwise key handshake completed (RSN)
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1625]: exiting on receipt of SIGTERM
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: started, version 2.80 cachesize 150
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: DNS service limited to local subnets
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq-dhcp[1723]: DHCP, IP range 192.168.202.228 -- 192.168.202.254, lease time 12h
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: using local addresses only for domain test
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: using local addresses only for domain onion
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: using local addresses only for domain localhost
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: using local addresses only for domain local
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: using local addresses only for domain invalid
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: using local addresses only for domain bind
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: using local addresses only for domain lan
Sun Nov 15 16:00:52 2020 daemon.warn dnsmasq[1723]: no servers found in /tmp/resolv.conf.auto, will retry
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: read /etc/hosts - 4 addresses
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq-dhcp[1723]: read /etc/ethers - 0 addresses
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: read /etc/hosts - 4 addresses
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq-dhcp[1723]: read /etc/ethers - 0 addresses
Sun Nov 15 16:00:55 2020 daemon.info dnsmasq-dhcp[1723]: DHCPREQUEST(br-lan) 192.168.1.164 68:94:23:8b:95:8d
Sun Nov 15 16:00:55 2020 daemon.info dnsmasq-dhcp[1723]: DHCPNAK(br-lan) 192.168.1.164 68:94:23:8b:95:8d wrong network
Sun Nov 15 16:00:58 2020 daemon.info dnsmasq-dhcp[1723]: DHCPDISCOVER(br-lan) 68:94:23:8b:95:8d
Sun Nov 15 16:00:58 2020 daemon.info dnsmasq-dhcp[1723]: DHCPOFFER(br-lan) 192.168.202.253 68:94:23:8b:95:8d
Sun Nov 15 16:00:58 2020 daemon.info dnsmasq-dhcp[1723]: DHCPREQUEST(br-lan) 192.168.202.253 68:94:23:8b:95:8d
Sun Nov 15 16:00:58 2020 daemon.info dnsmasq-dhcp[1723]: DHCPACK(br-lan) 192.168.202.253 68:94:23:8b:95:8d Moni
Sun Nov 15 16:01:00 2020 authpriv.info dropbear[1762]: Child connection from 192.168.202.253:3348
Sun Nov 15 16:01:07 2020 authpriv.notice dropbear[1762]: Password auth succeeded for 'root' from 192.168.202.253:3348
root@dir505:~#30 2020-11-15 11:23:37
Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP (21 odpowiedzi, napisanych Oprogramowanie / Software)
root@dir505:~# cat /sys/kernel/debug/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 4.14
S: Manufacturer=Linux 4.14.195 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1506 Rev= 1.02
S: Manufacturer=HUAWEI_MOBILE
S: Product=HUAWEI_MOBILE
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=03 Prot=12 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=03 Prot=16 Driver=huawei_cdc_ncm
E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=2ms
I:* If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=03 Prot=16 Driver=huawei_cdc_ncm
E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms31 2020-11-15 11:12:17
Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP (21 odpowiedzi, napisanych Oprogramowanie / Software)
No właśnie tak chciałem pierwotnie (bo na innym ruterze, MR3020 używam właśnie /dev/ttyUSB0), ale na DIR-505 nie ma takiego urządzenia:
root@dir505:~# ls /dev/tty*
/dev/tty /dev/ttyS1 /dev/ttyS12 /dev/ttyS15 /dev/ttyS4 /dev/ttyS7
/dev/ttyATH0 /dev/ttyS10 /dev/ttyS13 /dev/ttyS2 /dev/ttyS5 /dev/ttyS8
/dev/ttyS0 /dev/ttyS11 /dev/ttyS14 /dev/ttyS3 /dev/ttyS6 /dev/ttyS9Tą nazwę urządzenie którą mam teraz wziąłem ze strony opisującej co prawda inny modem huawei i ten ruter, ale chociaż 3ginfo coś już wyświetla.
https://olibalam.blogspot.com/2018/08/d … enwrt.html
https://ctrlv.link/shots/2020/11/15/Q1Pc.png
Karta jest bez SIM, i internet z nią działa np. gdy włożę do telefonu.
Czy czegoś brakuje aby pojawiło się to urzędzenie ttyUSB0?
32 2020-11-14 23:11:41
Temat: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP (21 odpowiedzi, napisanych Oprogramowanie / Software)
OpenWrt 19.07.4, r11208-ce6496d796
Witam,
3ginfo pokazuje status:
root@dir505:/etc/config# 3ginfo
Status: Połączony
Czas polaczenia: 0d, 00:01:16
Przeslano danych: 0.0 B / 1.6 KiB
Operator: Orange
Tryb pracy: LTE
Sila sygnalu: 74%
Urzadzenie: huawei E3372
MCC MNC: 260 03
LAC: D30A (54026)
CID: 03A98E21 (61443617)
TAC: D30A (54026)
CSQ: 23
RSSI: -67 dBm
RSCP: -145 dBm
Ec/IO: -32 dB
RSRP: -99 dBm
SINR: 1 dB
RSRQ: -13 dBjednak na interfejsie WAN w ogóle nie pojawia się IP publiczne (Orange)
Jak robię ifdown/ifup wan (lub reboot) nic sie nie zmienia, w logu pojawia się:
Sat Nov 14 21:42:13 2020 daemon.notice netifd: Interface 'wan' is now down
Sat Nov 14 21:42:13 2020 daemon.notice netifd: Interface 'wan' is disabled
Sat Nov 14 21:42:13 2020 daemon.notice netifd: Network device 'wwan0' link is down
Sat Nov 14 21:42:13 2020 daemon.notice netifd: Interface 'wan' has link connectivity loss
Sat Nov 14 21:42:25 2020 daemon.notice netifd: Interface 'wan' is enabled
Sat Nov 14 21:42:25 2020 daemon.notice netifd: Network device 'wwan0' link is up
Sat Nov 14 21:42:25 2020 daemon.notice netifd: Interface 'wan' has link connectivityPoza tym w logu logi modulu:
Sat Nov 14 21:32:20 2020 kern.info kernel: [ 13.238781] usbcore: registered new interface driver cdc_wdm
Sat Nov 14 21:32:20 2020 kern.info kernel: [ 13.263498] Loading modules backported from Linux version v4.19.137-0-gc076c79e03c6
Sat Nov 14 21:32:20 2020 kern.info kernel: [ 13.269788] Backport generated by backports.git v4.19.137-1-0-g60c3a249
Sat Nov 14 21:32:20 2020 kern.info kernel: [ 13.312982] ip_tables: (C) 2000-2006 Netfilter Core Team
Sat Nov 14 21:32:20 2020 kern.info kernel: [ 13.352107] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Sat Nov 14 21:32:20 2020 kern.info kernel: [ 13.667772] xt_time: kernel timezone is -0000
Sat Nov 14 21:32:20 2020 kern.info kernel: [ 13.679867] usbcore: registered new interface driver cdc_ether
Sat Nov 14 21:32:20 2020 kern.info kernel: [ 13.717289] usbcore: registered new interface driver cdc_ncm
Sat Nov 14 21:32:20 2020 kern.info kernel: [ 13.903464] huawei_cdc_ncm 1-1:1.1: MAC-Address: 00:1e:10:1f:00:00
Sat Nov 14 21:32:20 2020 kern.info kernel: [ 13.908208] huawei_cdc_ncm 1-1:1.1: setting rx_max = 16384
Sat Nov 14 21:32:20 2020 kern.info kernel: [ 13.940501] huawei_cdc_ncm 1-1:1.1: NDP will be placed at end of frame for this device.
Sat Nov 14 21:32:20 2020 kern.info kernel: [ 13.947386] huawei_cdc_ncm 1-1:1.1: cdc-wdm0: USB WDM device
Sat Nov 14 21:32:20 2020 kern.info kernel: [ 13.954151] huawei_cdc_ncm 1-1:1.1 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform-1, Huawei CDC NCM device, 00:1e:10:1f:00:00
Sat Nov 14 21:32:20 2020 kern.info kernel: [ 13.965005] usbcore: registered new interface driver huawei_cdc_ncm
Sat Nov 14 21:32:20 2020 user.info kernel: [ 14.070007] urngd: v1.0.2 started.
Sat Nov 14 21:32:20 2020 kern.info kernel: [ 14.183825] PPP generic driver version 2.4.2
Sat Nov 14 21:32:20 2020 kern.info kernel: [ 14.201007] NET: Registered protocol family 24Czy mógłby ktoś zerknąć na moje ustawienie /etc/config/network czy coś tam jest nie tak jak powinno?
config interface 'lan'
option ifname 'wlan0'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.202.193'
option netmask '255.255.255.192'
config interface wan
option ifname 'wwan0'
option device /dev/cdc-wdm0
option apn internet
option proto ncm
option delay '10'
option auto '1'Access point dziala prawidłowo
Na "ip a" jest:
root@dir505:/etc/config# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether c8:d3:a3:5b:44:42 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel state DOWN qlen 1000
link/ether c8:d3:a3:5b:44:43 brd ff:ff:ff:ff:ff:ff
4: wwan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN qlen 1000
link/ether 00:1e:10:1f:00:00 brd ff:ff:ff:ff:ff:ff
inet6 fe80::21e:10ff:fe1f:0/64 scope link
valid_lft forever preferred_lft forever
6: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
link/ether c8:d3:a3:5b:44:42 brd ff:ff:ff:ff:ff:ff
inet 192.168.202.193/26 brd 192.168.202.255 scope global br-lan
valid_lft forever preferred_lft forever
inet6 fe80::cad3:a3ff:fe5b:4442/64 scope link
valid_lft forever preferred_lft forever
7: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
link/ether c8:d3:a3:5b:44:42 brd ff:ff:ff:ff:ff:ff
inet6 fe80::cad3:a3ff:fe5b:4442/64 scope link
valid_lft forever preferred_lft forever33 2020-04-18 12:36:54
Odp: Konfiguracja interfejsów TP-Link Archer C7 (13 odpowiedzi, napisanych Oprogramowanie / Software)
Tę instalację Openwrt 19.07.2 robiłem przedwczoraj i była to czysta instalacja od zera, nie susupdate (wcześniej miałem 18.06)
Nigdy nie używalem takiego IP 192.168.1.1 w swoich konfiguracjach (taki IP jest tylko używany kiedy startuje się ruter w tzw. "failsafe mode" aby zalogować się po kablu na root@192.168.1.1 gdzie można odpalić mount_root czy zresetować firstboot'em)
Na chodzącym systemie nigdy takiej adresacji nie używałem gdyż zawsze w ustawieniach /etc/config/network ustawiam swoja siec na tym iterfejsie "bridge".
To musi być coś, co przywędrowało z tą ostatnią wersją OpenWrt
Przeszukałem caly katalog root ( / ) i to IP nie występuje w żadnym sensownym pliku konfiguracyjnym, który mógłby być "winnym"
# find / -type f -exec grep -El '192\.168\.1\.1[[:space:]]*' {} \;
/bin/config_generate
/etc/config/openvpn_recipes
/etc/ethers
/etc/rc.local
/etc/avahi/avahi-daemon.conf
/lib/preinit/00_preinit.conf
/overlay/upper/etc/config/openvpn_recipes
/overlay/upper/etc/avahi/avahi-daemon.conf
/overlay/upper/etc/rc.local
/overlay/upper/usr/lib/lua/luci/model/cbi/minidlna.lua
/overlay/upper/usr/lib/lua/luci/model/cbi/openvpn-advanced.lua
/overlay/upper/usr/lib/lua/luci/model/cbi/openvpn-basic.lua
/overlay/upper/www/luci-static/resources/view/system/flash.js
/overlay/upper/bin/config_generate
# grep 192.168.1.1 /etc/rc.local
/sbin/ip a d 192.168.1.1/24 dev eth1.1
# grep 192.168.1.1 /etc/avahi/avahi-daemon.conf
#publish-dns-servers=192.168.1.1
# grep 192.168.1.1 /etc/config/openvpn_recipes
option server_bridge '192.168.1.1 255.255.255.0 192.168.1.128 192.168.1.254'Dodam, że serwis openvpn w ogóle nie chodzi (jest zdisejblowany).
34 2020-04-18 11:39:37
Odp: Konfiguracja interfejsów TP-Link Archer C7 (13 odpowiedzi, napisanych Oprogramowanie / Software)
a, widocznie to nieświadomie się samo zainstalowało jak jechałem z tym poradnikiem do samby...
https://eko.one.pl/?p=openwrt-samba#samba49
# opkg whatdepends avahi-dbus-daemon
Root set:
avahi-dbus-daemon
What depends on root set
libavahi-client 0.8-1 depends on avahi-dbus-daemon
samba4-libs 4.11.6-1 depends on libavahi-clientCzyli aby sie tego IP pozbyc muszę odinstalować tę sambę? Czy to IP jest jej do czegoś potrzebne? Można to avahi usunąć forc'em?
pozdrawiam,
S.
35 2020-04-18 09:41:44
Odp: Konfiguracja interfejsów TP-Link Archer C7 (13 odpowiedzi, napisanych Oprogramowanie / Software)
Nie znajduję nic co mogłoby podnosić to IP, wydaje mi się, że to jest cecha tego najnowszego OpwnWrt 19.07.2
Na razię recznie to usuwam - dodalem komendę do /etc/rc.local:
ip a d 192.168.1.1/24 dev eth1.1w momencie usuwania tego IP na "logread" pojawia się komunikat:
Sat Apr 18 10:37:55 2020 daemon.info avahi-daemon[1538]: Withdrawing address record for 192.168.1.1 on eth1.1.
Sat Apr 18 10:37:55 2020 daemon.info avahi-daemon[1538]: Leaving mDNS multicast group on interface eth1.1.IPv4 with address 192.168.1.1.
Sat Apr 18 10:37:55 2020 daemon.info avahi-daemon[1538]: Interface eth1.1.IPv4 no longer relevant for mDNS.Po usunięciu IP wszystko wygląda że działa ok.
36 2020-04-17 23:10:50
Odp: Konfiguracja interfejsów TP-Link Archer C7 (13 odpowiedzi, napisanych Oprogramowanie / Software)
Nic nie konfigurowalem sam, wiec prawdopodobnie jakis soft zainstalowalny z repo to "przywlókł"
W konfiguracji /etc/config/network nie ma tego IP
Jedyne to to co pokazałem we wcześnieszym wpisie - skrypt: /bin/config_generate
Wygląda, że jest on odpalany przez /etc/init.d/boot:
# find / -type f -exec grep -El '/bin/config_generate' {} \;
/etc/init.d/boot
pozdrawiam,
37 2020-04-17 21:28:21
Odp: Konfiguracja interfejsów TP-Link Archer C7 (13 odpowiedzi, napisanych Oprogramowanie / Software)
No właśnie mnie to zdziwiło bo na br-lan ja mam IP 192.168.171.1. Nie wiem skąd ten 192.168.1.1 na eth1.1 (w poprzednim OpenWrt 18.6 tego IP nie było a konfiguracja była można by rzec identyczna)
Generalnie sieć działa ok, klienci w LAN dostają IP z puli 192.168.171.x, internet działa ok.
I np. z klienta który dostał konfigurację:
Karta bezprzewodowej sieci LAN Połączenie sieci bezprzewodowej:
Sufiks DNS konkretnego połączenia : lan
Adres IPv4. . . . . . . . . . . . . : 192.168.171.103
Maska podsieci. . . . . . . . . . : 255.255.255.0
Brama domyślna. . . . . . . . . . : 192.168.171.1Mogę się zalogować na router po ssh (lub wejść na stronę Luci) zarówna na IP 192.168.171.1 jak i na to dziwne 192.168.1.1 - zgaduje że to idzie przez 192.168.171.1 i jakiś forwarding na ruterze. To IP 192.168.1.1 oczywiście też odpowiada na pinga z tej workstacji, z LAN.
Oto output ifconfig po rebucie:
# ifconfig
br-lan Link encap:Ethernet HWaddr C4:6E:2e:11:f7:56
inet addr:192.168.171.1 Bcast:192.168.170.255 Mask:255.255.255.0
inet6 addr: fe80::c11c:1fff:fe3c:f326/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1192 errors:0 dropped:4 overruns:0 frame:0
TX packets:1427 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:154558 (150.9 KiB) TX bytes:1089964 (1.0 MiB)
eth0 Link encap:Ethernet HWaddr C4:6E:2e:11:f7:57
inet6 addr: fe80::c11c:1fff:fe3c:f327/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1287 errors:0 dropped:0 overruns:0 frame:0
TX packets:942 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1064356 (1.0 MiB) TX bytes:130607 (127.5 KiB)
Interrupt:4
eth0.2 Link encap:Ethernet HWaddr C4:6E:2e:11:f7:57
inet addr:109.242.110.231 Bcast:109.242.110.255 Mask:255.255.254.0
inet6 addr: fe80::c11c:1fff:fe3c:f327/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1287 errors:0 dropped:0 overruns:0 frame:0
TX packets:920 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1041190 (1016.7 KiB) TX bytes:122778 (119.9 KiB)
eth1 Link encap:Ethernet HWaddr C4:6E:2e:11:f7:56
inet6 addr: fe80::c11c:1fff:fe3c:f326/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:720 errors:0 dropped:0 overruns:0 frame:0
TX packets:1299 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:98501 (96.1 KiB) TX bytes:992507 (969.2 KiB)
Interrupt:5
eth1.1 Link encap:Ethernet HWaddr C4:6E:2e:11:f7:56
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:719 errors:0 dropped:4 overruns:0 frame:0
TX packets:1268 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:85499 (83.4 KiB) TX bytes:982978 (959.9 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:50 errors:0 dropped:0 overruns:0 frame:0
TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6404 (6.2 KiB) TX bytes:6404 (6.2 KiB)
wlan0 Link encap:Ethernet HWaddr C4:6E:2e:11:f7:55
inet6 addr: fe80::c11c:1fff:fe3c:f325/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:117 errors:0 dropped:0 overruns:0 frame:0
TX packets:560 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:29702 (29.0 KiB) TX bytes:148848 (145.3 KiB)
wlan1 Link encap:Ethernet HWaddr C4:6E:2e:11:f7:56
inet6 addr: fe80::c11c:1fff:fe3c:f326/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:883 errors:0 dropped:0 overruns:0 frame:0
TX packets:998 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:189271 (184.8 KiB) TX bytes:308096 (300.8 KiB)38 2020-04-17 20:59:16
Odp: Konfiguracja interfejsów TP-Link Archer C7 (13 odpowiedzi, napisanych Oprogramowanie / Software)
Dziękuję Panu za odpowiedź.
Nie mogę jednak znaleźć informacji o tym IP 192.168.1.1, w jakim celu i co je konfiguruje skoro nie ma go w mojej konfiguracji sieci:
4: eth1.1@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
link/ether c4:6e:2e:11:f7:56 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/24 brd 192.168.1.255 scope global eth1.1Czy on musi byc podnoszony?
Występuje on np. w takim skrypcie /bin/config_generate:
pozdrawiam,
S
39 2020-04-17 17:39:40
Temat: Konfiguracja interfejsów TP-Link Archer C7 (13 odpowiedzi, napisanych Oprogramowanie / Software)
Witam,
Czy można skonfigurować interfejsy sieciowe (/etc/config/network) na tym modelu (posiada on fizyczny 1 port WAN i 4 porty LAN) aby konfiguracja była jak najprostsza (bez żadnych niepotrzebnych interfejsów vlan, typu eth1.1@eth1 czy eth0.2@eth0)?
Wszystkie porty LAN to jeden LAN. Port WAN podpięty do ISP/internetu.
Obecna konfiguracja jest taka jak dostarczona w firmware OpenWrt 19.07.2 dla tego modelu, jedyne co dodane to IP statyczne i SSIDy sieci wifi.
Czy dobrze rozumiem, że interfejs typu bridge eth1.1 jest tworzony w wirtualnym LAN ID1 obejmującym 4 porty LAN, a eth0.2 obejmuje tylko wirtualny LAN ID2 z portem WAN? Co znaczą te 0t, 6t w konfiguracjach tych vswitchy?
Co to znaczy, że w sekcji "option switch" jest reset i enable_vlan 1?
Czy w mojej konfiguracji możnaby to uprościć aby WAN IP bylo na eth0 i LAN IP używany do bridg'owania na eth1?
Nie rozumiem też skąd na interfejsie eth1.1 bierze się ten adres IP 192.168.1.1 skoro nie ma go nigdzie w konfiguracji - zresztą proszę zobaczyć pod spodem zrzut komendy "ip a".
Z góry dziękuję wyjaśnienie.
pozdrawiam,
S.
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fdce:d8e3:e332::/48'
config interface 'lan'
option type 'bridge'
option ifname 'eth1.1'
option proto 'static'
option ipaddr '192.168.170.1'
option netmask '255.255.255.0'
config interface 'wan'
option ifname 'eth0.2'
option proto 'dhcp'
option peerdns '0'
option delegate '0'
option dns '127.0.0.1 1.1.1.1 9.9.9.9 149.112.112.112 1.0.0.1 8.8.8.8 8.8.4.4'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '2 3 4 5 0t'
config switch_vlan
option device 'switch0'
option vlan '2'
option ports '1 6t'# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP qlen 1000
link/ether c4:6e:2e:11:f7:57 brd ff:ff:ff:ff:ff:ff
inet6 fe80::c11c:1fff:fe3c:f327/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP qlen 1000
link/ether c4:6e:2e:11:f7:56 brd ff:ff:ff:ff:ff:ff
inet6 fe80::c11c:1fff:fe3c:f326/64 scope link
valid_lft forever preferred_lft forever
4: eth1.1@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
link/ether c4:6e:2e:11:f7:56 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/24 brd 192.168.1.255 scope global eth1.1
valid_lft forever preferred_lft forever
7: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
link/ether c4:6e:2e:11:f7:56 brd ff:ff:ff:ff:ff:ff
inet 192.168.171.1/24 brd 192.168.170.255 scope global br-lan
valid_lft forever preferred_lft forever
inet6 fe80::c11c:1fff:fe3c:f326/64 scope link
valid_lft forever preferred_lft forever
8: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
link/ether c4:6e:2e:11:f7:57 brd ff:ff:ff:ff:ff:ff
inet 109.242.110.231/23 brd 109.242.110.255 scope global eth0.2
valid_lft forever preferred_lft forever
inet6 fe80::c11c:1fff:fe3c:f327/64 scope link
valid_lft forever preferred_lft forever
9: wlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
link/ether c4:6e:2e:11:f7:56 brd ff:ff:ff:ff:ff:ff
inet6 fe80::c11c:1fff:fe3c:f326/64 scope link
valid_lft forever preferred_lft forever
10: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
link/ether c4:6e:2e:11:f7:55 brd ff:ff:ff:ff:ff:ff
inet6 fe80::c11c:1fff:fe3c:f325/64 scope link
valid_lft forever preferred_lft forever40 2020-04-17 13:52:53
Odp: Błąd podczas logowania do Luci (OpenWrt 19.07.2 r10947-65030d8) (2 odpowiedzi, napisanych Oprogramowanie / Software)
ok, dziękuję za radę.
cofnąłem do poprzedniej wersji i zgodnie ze wskazówką:
https://github.com/openwrt/luci/commit/ … c6bab786f1
po zrobieniu zmiany w "/usr/lib/lua/luci/controller/minidlna.lua" już działa ok.
to:
running = (sys.call("pidof minidlnad >/dev/null") == 0),
na to:
running = (sys.call("pidof minidlna >/dev/null") == 0),
PS. w tej wersji snapshotowej którą miałęm krótko, proces serwera już nazywał się "minidland", więc pewnie w przyszłości będzie to tego powrót w tym skrypcie .lua
pozdrawiam,
S.
41 2020-04-17 13:12:43
Temat: Błąd podczas logowania do Luci (OpenWrt 19.07.2 r10947-65030d8) (2 odpowiedzi, napisanych Oprogramowanie / Software)
Witam,
na C7 Archer zainstalowalem wersję OpenWrt jak w temacie, logowanie do Luci działało ok jednak ponieważ minidlna nie działało więc odinstalowałem orginalne paczki minidlna i zainstalowałem podnownie ale z paczek ze snapshota jak ktoś zarekomendował na ten problem tu
https://downloads.openwrt.org/snapshots … s_24kc.ipk
https://downloads.openwrt.org/snapshots … 22_all.ipk
Jednak po tej opracji w trakcie logowania do Luci (po podaniu loginu i hasła) dostaję taki błąd:
PS. Wcześniej był też doinstalowany luci-ssl ale nie wiem czy to moze byc przyczyną tego błędu, kiedy po restarcie uhttpd certyfikat się wygenerował/aktywował (prawidłowo) bo bez tls, po http:// też przestało działać logowanie.
# /etc/init.d/uhttpd restart
4+0 records in
4+0 records out
Generating RSA private key, 2048 bit long modulus
Generating selfsigned certificate with subject 'C=ZZ,ST=Somewhere,L=Unknown,O=OpenWrtb133454c,CN=OpenWrt,' and validity 20200417112927-20220417112927
#Jak można zdiagnozować taki problem? czy są jakieś logi od luci? W /var/log mam tylko:
# ls /var/log
ddns lastlog log.nmbd log.smbd samba wtmppozdrawiam,
S.
42 2019-12-30 22:57:50
Odp: mr3020 v1 z openwrt jako klient AP i "dostawca" sieci kablem dla rpi2 (3 odpowiedzi, napisanych Oprogramowanie / Software)
Dziękuję, wszystko działa jak ta lala
Mam jeszcze dwa dodatkowe pytania:
Pytanie 1)
Nie rozumiem po co jest ustawiany ten "inny" IP w konfiguracji tego nowego rutera (tutaj mr3020):
config interface 'lan'
option ifname 'eth0'
option proto 'dhcp'
option ipaddr '192.168.2.1'Po co to IP musi tam być? (ip komenda nie pokazuje aby było one podniesione na mr3020)
Jak już odpaliłem:
# uci set network.bridge.ipaddr={IP_przydzielone_z_nadrzednego_routera}
# uci commit network
# reboot'To faktycznie mogę się dostać też na ruter po podpięciu kabla z niego do komputera (sieć interfejsie na komputerze auto/auto) - wcześniej mogłem tylko jak kabel był odpięty (komendy powyższe rozwiązały problem). Po podpięciu kabla komputer dostaje prawidłowo IP z rutera nadrzędnego - brak tylko DNS serwerów jak na innych w lanie - zamiast jest IP rutera nadrzędnego jako DNS server - można przekazywać te DNSy z nadrzędnego również?
Pytanie 2)
Czy to rozgłaszanie sieci bezprzewodowo na tym dodatkowym ruterze (opisane w drugiej części wskazanej instrukcji) nie będzie kolidowało z tą konfiguracją sekcji mode=sta?
Czy ten dodatkowy ruter (tutaj mr3020) może być jednocześnie i klientem nadrzędnego AP i sam być nowym AP (z tego co zrozumiałem nawet o tym samym SSID)? Czy takie samo SSID nie bedzie kolidowało/degradowało jakości obu AP?
jeszcze raz dziękuję i pozdrawiam.
43 2019-12-30 20:30:38
Temat: mr3020 v1 z openwrt jako klient AP i "dostawca" sieci kablem dla rpi2 (3 odpowiedzi, napisanych Oprogramowanie / Software)
witam,
Mam skonfigurowany AP na Openwrt na TP-Link Archer C7 (dynamicznie przydziela IP z puli 192.168.100.0/24 komputerom w sieci domowej), Raspberry Pi 2 (bez karty sieciowej) i router TP-Link MR3020 v1 na który wrzuciłem Lede 17.1.
Chciałbym wykorzystać MR3020 jako "kartę sieciową" dla Rpi2 w taki sposób, że samo MR3020 jest klientem AP na C7 (dostaje IP z DHCP na C7 z tej samej puli 192.168.100.0/24 i używa C7 jako bramy) i podpięty do niego kablem ethernet Rpi2 również dostaje IP z DHCP na C7 z tej samej puli adresowej i IP C7 jest też bramą dla niego).
Czy skonfigurowanie czegoś takiego byłoby możliwe? Z tego co pamiętam relayd może się do tego nadać, wdzięczny byłbym za przykładową konfiguracje sieci i relayd do takiego celu w openwrt na MR3020.
pozdrawiam,
Sławek
44 2019-07-21 19:52:18
Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN (7 odpowiedzi, napisanych Oprogramowanie / Software)
Po zainstalowaniu OpenWrt 18.06.4, r7808-ef686b7292 i z poniższą konfiguracją działa ok na tym ruterze (dostawca internety Vectra, dynamiczne IP na WAN). Może komuś się przyda.
/etc/config/network:
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fd8a:1513:f08c::/48'
config interface 'lan'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
config interface 'wan'
option ifname 'eth0.1'
option proto 'dhcp'
option peerdns '0'
option delegate '0'
option dns '1.1.1.1 1.0.0.1 9.9.9.9 149.112.112.112 8.8.8.8 8.8.4.4'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '4 6t'/etc/config/wireless:
config wifi-device 'radio0'
option type 'mac80211'
option channel '11'
option hwmode '11g'
option path 'platform/10300000.wmac'
option htmode 'HT20'
option disabled '0'
config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option ssid 'wifiname'
option encryption 'psk2'
option key 'wifihaslo'45 2019-03-18 21:46:51
Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN (7 odpowiedzi, napisanych Oprogramowanie / Software)
Przepraszam za zwłokę, oto te informacje (nie wszystkie komendy działają):
root@fd2wew:~# brtctl show
-ash: brtctl: not found
root@fd2wew:~# ifstatus wan
Interface wan not found
root@fd2wew:~# ubus -S list "network.interface.wan"
root@fd2wew:~# ubus call network.interface status "{ \"interface\" : \"wan\" }"
Command failed: Not found
root@fd2wew:~#Jest to 'vanilla' instalacja, bez żadnych dodatkowych paczek (brak internetu / WAN), zainstalowana przez tftp z http://downloads.openwrt.org/releases/1 … covery.bin
fd2wew:~# logread
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 0.000000] Linux version 4.14.95 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7552-2f11a9e)) #0 Mon Jan 28 08:54:32 2019
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] Board has DDR2
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] Analog PMU set to hw control
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] Digital PMU set to hw control
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] MIPS: machine is TP-Link TL-WR902AC v3
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] Determined physical RAM map:
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] memory: 04000000 @ 00000000 (usable)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Mon Mar 18 20:28:06 2019 kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Mon Mar 18 20:28:06 2019 kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] Zone ranges:
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] Movable zone start for each node
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] Early memory node ranges
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.000000] On node 0 totalpages: 16384
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 80422fc0, node_mem_map 81000040
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.000000] Normal zone: 128 pages used for memmap
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 0.000000] random: get_random_bytes called from 0x8042672c with crng_init=0
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] Writing ErrCtl register=0000000e
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] Readback ErrCtl register=0000000e
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] Memory: 60248K/65536K available (3592K kernel code, 183K rwdata, 464K rodata, 168K init, 206K bss, 5288K reserved, 0K cma-reserved)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] NR_IRQS: 256
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] intc: using register map from devicetree
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] CPU Clock: 580MHz
Mon Mar 18 20:28:06 2019 kern.crit kernel: [ 0.000000] timer_probe: no matching timers found
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.000012] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.007548] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.073500] pid_max: default: 32768 minimum: 301
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.078202] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.084556] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.097267] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.106758] futex hash table entries: 256 (order: -1, 3072 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.112710] pinctrl core: initialized pinctrl subsystem
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.119056] NET: Registered protocol family 16
Mon Mar 18 20:28:06 2019 kern.warn kernel: [ 0.127687] Can't analyze schedule() prologue at 8037dd78
Mon Mar 18 20:28:06 2019 kern.err kernel: [ 0.233139] mt7620-pci 10140000.pcie: Port 0 N_FTS = 1b105000
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.388427] PCI host bridge /pcie@10140000 ranges:
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.393003] MEM 0x0000000020000000..0x000000002fffffff
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.398042] IO 0x0000000010160000..0x000000001016ffff
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.420372] mt7621_gpio 10000600.gpio: registering 32 gpios
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.425956] mt7621_gpio 10000600.gpio: registering 32 gpios
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.431542] mt7621_gpio 10000600.gpio: registering 32 gpios
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.437818] PCI host bridge to bus 0000:00
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.441778] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.448358] pci_bus 0000:00: root bus resource [io 0xffffffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.454081] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.460625] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.468321] pci 0000:00:00.0: [14c3:0801] type 01 class 0x060400
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.468367] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.468385] pci 0000:00:00.0: reg 0x14: [mem 0x20200000-0x2020ffff]
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.468469] pci 0000:00:00.0: supports D1
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.468481] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.468926] pci 0000:01:00.0: [14c3:7650] type 00 class 0x028000
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.468980] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.469127] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.469388] pci 0000:01:00.1: [14c3:8650] type 00 class 0x0d1100
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.469437] pci 0000:01:00.1: reg 0x10: [mem 0x00000000-0x000fffff]
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.469583] pci 0000:01:00.1: supports D1
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.469596] pci 0000:01:00.1: PME# supported from D0 D1 D3hot D3cold
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.469828] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.469848] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.469901] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.476237] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.483009] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.489510] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.496088] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.502619] pci 0000:01:00.1: BAR 0: assigned [mem 0x20100000-0x201fffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.509183] pci 0000:00:00.0: PCI bridge to [bus 01]
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.513958] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.525409] clocksource: Switched to clocksource MIPS
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.531497] NET: Registered protocol family 2
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.536686] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.543379] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.549563] TCP: Hash tables configured (established 1024 bind 1024)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.555803] UDP hash table entries: 256 (order: 0, 4096 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.561404] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.567737] NET: Registered protocol family 1
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 0.571979] PCI: CLS 0 bytes, default 32
Mon Mar 18 20:28:06 2019 kern.warn kernel: [ 0.575365] Crashlog allocated RAM at address 0x3f00000
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.582052] workingset: timestamp_bits=30 max_order=14 bucket_order=0
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.594290] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.599911] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.619856] io scheduler noop registered
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.623590] io scheduler deadline registered (default)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.629566] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.638521] console [ttyS0] disabled
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.641960] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.650732] console [ttyS0] enabled
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.657722] bootconsole [early0] disabled
Mon Mar 18 20:28:06 2019 kern.err kernel: [ 0.666468] cacheinfo: Failed to find cpu0 device node
Mon Mar 18 20:28:06 2019 kern.warn kernel: [ 0.671684] cacheinfo: Unable to detect cache hierarchy for CPU 0
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.678647] spi-mt7621 10000b00.spi: sys_freq: 193333333
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.700110] m25p80 spi0.0: s25fl064k (8192 Kbytes)
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 0.705023] 4 fixed-partitions partitions found on MTD device spi0.0
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 0.711481] Creating 4 MTD partitions on "spi0.0":
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 0.716364] 0x000000000000-0x000000020000 : "boot"
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 0.722153] 0x000000020000-0x0000007c0000 : "firmware"
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 0.777890] 2 tplink-fw partitions found on MTD device firmware
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 0.783919] 0x000000020000-0x00000017f3d0 : "kernel"
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 0.789876] 0x00000017f3d0-0x0000007c0000 : "rootfs"
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 0.795737] mtd: device 3 (rootfs) set to be root filesystem
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 0.803037] 1 squashfs-split partitions found on MTD device rootfs
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 0.809384] 0x0000003d0000-0x0000007c0000 : "rootfs_data"
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 0.815849] 0x0000007c0000-0x0000007d0000 : "config"
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 0.821732] 0x0000007d0000-0x000000800000 : "factory"
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.828453] libphy: Fixed MDIO Bus: probed
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.844978] rt3050-esw 10110000.esw: link changed 0x00
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.851833] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.862130] NET: Registered protocol family 10
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.870839] Segment Routing with IPv6
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.874676] NET: Registered protocol family 17
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.879309] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.892464] 8021q: 802.1Q VLAN Support v1.8
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.909048] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 0.917171] Freeing unused kernel memory: 168K
Mon Mar 18 20:28:06 2019 kern.warn kernel: [ 0.921676] This architecture does not have kernel memory protection.
Mon Mar 18 20:28:06 2019 user.info kernel: [ 2.113446] init: Console is alive
Mon Mar 18 20:28:06 2019 user.info kernel: [ 2.117231] init: - watchdog -
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 2.409568] random: fast init done
Mon Mar 18 20:28:06 2019 user.info kernel: [ 3.461805] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.689608] usbcore: registered new interface driver usbfs
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.695257] usbcore: registered new interface driver hub
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.700826] usbcore: registered new device driver usb
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.711827] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.720174] ehci-platform: EHCI generic platform driver
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.735832] phy phy-10120000.usbphy.0: remote usb device wakeup disabled
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.742637] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.747960] ehci-platform 101c0000.ehci: EHCI Host Controller
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.753849] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.762010] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.795449] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.802853] hub 1-0:1.0: USB hub found
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.807133] hub 1-0:1.0: 1 port detected
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.814395] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.822239] ohci-platform: OHCI generic platform driver
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.827883] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.834803] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.842978] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.920534] hub 2-0:1.0: USB hub found
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 3.924737] hub 2-0:1.0: 1 port detected
Mon Mar 18 20:28:06 2019 user.info kernel: [ 3.933840] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Mon Mar 18 20:28:06 2019 user.info kernel: [ 3.951730] init: - preinit -
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 5.389934] rt3050-esw 10110000.esw: link changed 0x00
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 5.573587] random: procd: uninitialized urandom read (4 bytes read)
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 8.940986] jffs2: notice: (387) jffs2_build_xattr_subsystem: complete building xattr subsystem, 41 of xdatum (3 unchecked, 38 orphan) and 45 of xref (38 dead, 0 orphan) found.
Mon Mar 18 20:28:06 2019 user.info kernel: [ 8.959328] mount_root: switching to jffs2 overlay
Mon Mar 18 20:28:06 2019 kern.warn kernel: [ 8.998267] overlayfs: upper fs does not support tmpfile.
Mon Mar 18 20:28:06 2019 user.warn kernel: [ 9.010952] urandom-seed: Seeding with /etc/urandom.seed
Mon Mar 18 20:28:06 2019 user.info kernel: [ 9.064384] procd: - early -
Mon Mar 18 20:28:06 2019 user.info kernel: [ 9.068247] procd: - watchdog -
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 9.368818] rt3050-esw 10110000.esw: link changed 0x10
Mon Mar 18 20:28:06 2019 user.info kernel: [ 9.973936] procd: - watchdog -
Mon Mar 18 20:28:06 2019 user.info kernel: [ 9.977489] procd: - ubus -
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 10.247144] random: ubusd: uninitialized urandom read (4 bytes read)
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 10.333810] random: ubusd: uninitialized urandom read (4 bytes read)
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 10.340874] random: ubusd: uninitialized urandom read (4 bytes read)
Mon Mar 18 20:28:06 2019 user.info kernel: [ 10.348463] procd: - init -
Mon Mar 18 20:28:06 2019 user.info kernel: [ 10.901642] kmodloader: loading kernel modules from /etc/modules.d/*
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 11.001577] ip6_tables: (C) 2000-2006 Netfilter Core Team
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 11.020823] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 11.029015] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 11.039092] ip_tables: (C) 2000-2006 Netfilter Core Team
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 11.054299] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 11.130568] xt_time: kernel timezone is -0000
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 11.199619] mt76_wmac 10300000.wmac: ASIC revision: 76280001
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 12.227676] mt76_wmac 10300000.wmac: Firmware Version: 20151201
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 12.233701] mt76_wmac 10300000.wmac: Build Time: 20151201183641
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 12.255435] mt76_wmac 10300000.wmac: firmware init done
Mon Mar 18 20:28:06 2019 kern.debug kernel: [ 12.428556] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 12.475343] PPP generic driver version 2.4.2
Mon Mar 18 20:28:06 2019 kern.info kernel: [ 12.553998] NET: Registered protocol family 24
Mon Mar 18 20:28:06 2019 user.info kernel: [ 12.562761] kmodloader: done loading kernel modules from /etc/modules.d/*
Mon Mar 18 20:28:06 2019 kern.warn kernel: [ 13.650613] urandom_read: 5 callbacks suppressed
Mon Mar 18 20:28:06 2019 kern.notice kernel: [ 13.650623] random: jshn: uninitialized urandom read (4 bytes read)
Mon Mar 18 20:28:07 2019 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Mon Mar 18 20:28:07 2019 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: started, version 2.80 cachesize 150
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: DNS service limited to local subnets
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: using local addresses only for domain test
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: using local addresses only for domain onion
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: using local addresses only for domain localhost
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: using local addresses only for domain local
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: using local addresses only for domain invalid
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: using local addresses only for domain bind
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: using local addresses only for domain lan
Mon Mar 18 20:28:08 2019 daemon.warn dnsmasq[721]: no servers found in /tmp/resolv.conf.auto, will retry
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: read /etc/hosts - 4 addresses
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Mon Mar 18 20:28:08 2019 authpriv.info dropbear[748]: Not backgrounding
Mon Mar 18 20:28:09 2019 kern.info kernel: [ 17.387985] rt3050-esw 10110000.esw: link changed 0x00
Mon Mar 18 20:28:10 2019 user.notice : Added device handler type: tunnel
Mon Mar 18 20:28:10 2019 user.notice : Added device handler type: Network device
Mon Mar 18 20:28:10 2019 user.notice : Added device handler type: bridge
Mon Mar 18 20:28:10 2019 user.notice : Added device handler type: veth
Mon Mar 18 20:28:10 2019 user.notice : Added device handler type: macvlan
Mon Mar 18 20:28:10 2019 user.notice : Added device handler type: 8021ad
Mon Mar 18 20:28:10 2019 user.notice : Added device handler type: 8021q
Mon Mar 18 20:28:12 2019 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Mon Mar 18 20:28:12 2019 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Mon Mar 18 20:28:12 2019 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Mon Mar 18 20:28:13 2019 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Mon Mar 18 20:28:13 2019 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Mon Mar 18 20:28:13 2019 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Mon Mar 18 20:28:13 2019 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Mon Mar 18 20:28:13 2019 kern.info kernel: [ 21.380207] rt3050-esw 10110000.esw: link changed 0x10
Mon Mar 18 20:28:13 2019 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Mon Mar 18 20:28:14 2019 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Mon Mar 18 20:28:14 2019 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Mon Mar 18 20:28:14 2019 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Mon Mar 18 20:28:15 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led USB
Mon Mar 18 20:28:15 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led wlan2g
Mon Mar 18 20:28:15 2019 daemon.notice netifd: Interface 'loopback' is enabled
Mon Mar 18 20:28:15 2019 daemon.notice netifd: Interface 'loopback' is setting up now
Mon Mar 18 20:28:15 2019 daemon.notice netifd: Interface 'loopback' is now up
Mon Mar 18 20:28:15 2019 kern.info kernel: [ 23.271942] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Mon Mar 18 20:28:15 2019 daemon.notice netifd: Interface 'lan' is enabled
Mon Mar 18 20:28:15 2019 daemon.notice netifd: Interface 'lan' is setting up now
Mon Mar 18 20:28:15 2019 daemon.notice netifd: Interface 'lan' is now up
Mon Mar 18 20:28:15 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led lan
Mon Mar 18 20:28:15 2019 daemon.notice netifd: Network device 'lo' link is up
Mon Mar 18 20:28:15 2019 daemon.notice netifd: Interface 'loopback' has link connectivity
Mon Mar 18 20:28:16 2019 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Mon Mar 18 20:28:17 2019 daemon.info procd: - init complete -
Mon Mar 18 20:28:18 2019 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Mon Mar 18 20:28:18 2019 daemon.info dnsmasq[721]: read /etc/hosts - 4 addresses
Mon Mar 18 20:28:18 2019 daemon.info dnsmasq[721]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Mon Mar 18 20:28:19 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Mon Mar 18 20:28:19 2019 kern.info kernel: [ 27.103299] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mon Mar 18 20:28:19 2019 kern.info kernel: [ 27.114318] br-lan: port 1(wlan0) entered blocking state
Mon Mar 18 20:28:19 2019 kern.info kernel: [ 27.119805] br-lan: port 1(wlan0) entered disabled state
Mon Mar 18 20:28:19 2019 kern.info kernel: [ 27.125597] device wlan0 entered promiscuous mode
Mon Mar 18 20:28:19 2019 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Mon Mar 18 20:28:19 2019 daemon.err hostapd: Using interface wlan0 with hwaddr b0:4e:26:eb:4e:5a and ssid "samowar"
Mon Mar 18 20:28:19 2019 kern.info kernel: [ 27.659450] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mon Mar 18 20:28:19 2019 kern.info kernel: [ 27.666141] br-lan: port 1(wlan0) entered blocking state
Mon Mar 18 20:28:19 2019 kern.info kernel: [ 27.671534] br-lan: port 1(wlan0) entered forwarding state
Mon Mar 18 20:28:19 2019 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ENABLED
Mon Mar 18 20:28:19 2019 daemon.notice hostapd: wlan0: AP-ENABLED
Mon Mar 18 20:28:19 2019 daemon.notice netifd: bridge 'br-lan' link is up
Mon Mar 18 20:28:19 2019 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Mar 18 20:28:20 2019 kern.info kernel: [ 27.701086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Mon Mar 18 20:28:20 2019 daemon.notice netifd: Network device 'wlan0' link is up
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[721]: exiting on receipt of SIGTERM
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: started, version 2.80 cachesize 150
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: DNS service limited to local subnets
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq-dhcp[1366]: DHCP, IP range 192.168.171.100 -- 192.168.171.249, lease time 12h
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: using local addresses only for domain test
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: using local addresses only for domain onion
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: using local addresses only for domain localhost
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: using local addresses only for domain local
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: using local addresses only for domain invalid
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: using local addresses only for domain bind
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: using local addresses only for domain lan
Mon Mar 18 20:28:25 2019 daemon.warn dnsmasq[1366]: no servers found in /tmp/resolv.conf.auto, will retry
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: read /etc/hosts - 4 addresses
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq-dhcp[1366]: read /etc/ethers - 0 addresses
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: read /etc/hosts - 4 addresses
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq-dhcp[1366]: read /etc/ethers - 0 addresses
Mon Mar 18 20:28:38 2019 daemon.info hostapd: wlan0: STA 68:94:23:8b:95:8d IEEE 802.11: authenticated
Mon Mar 18 20:28:38 2019 daemon.info hostapd: wlan0: STA 68:94:23:8b:95:8d IEEE 802.11: associated (aid 1)
Mon Mar 18 20:28:38 2019 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 68:94:23:8b:95:8d
Mon Mar 18 20:28:38 2019 daemon.info hostapd: wlan0: STA 68:94:23:8b:95:8d WPA: pairwise key handshake completed (RSN)
Mon Mar 18 20:28:38 2019 daemon.info dnsmasq-dhcp[1366]: DHCPREQUEST(br-lan) 192.168.171.164 68:94:23:8b:95:8d
Mon Mar 18 20:28:38 2019 daemon.info dnsmasq-dhcp[1366]: DHCPACK(br-lan) 192.168.171.164 68:94:23:8b:95:8d lesspass
Mon Mar 18 20:28:42 2019 daemon.info dnsmasq-dhcp[1366]: DHCPINFORM(br-lan) 192.168.171.164 68:94:23:8b:95:8d
Mon Mar 18 20:28:42 2019 daemon.info dnsmasq-dhcp[1366]: DHCPACK(br-lan) 192.168.171.164 68:94:23:8b:95:8d lesspass
Mon Mar 18 20:28:57 2019 authpriv.info dropbear[1405]: Child connection from 192.168.171.164:3020
Mon Mar 18 20:29:03 2019 authpriv.notice dropbear[1405]: Password auth succeeded for 'root' from 192.168.171.164:3020
Mon Mar 18 20:29:13 2019 kern.notice kernel: [ 81.345478] random: crng init done46 2019-03-16 21:13:32
Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN (7 odpowiedzi, napisanych Oprogramowanie / Software)
Usunąłem tę linię z pliku "/etc/config/network", zrestartowałem router jednak dalej nie pojawia się IP na interfejsie WAN.
jak odpinam kabel i podpinam ponownie tylko takie dwie linie pojawiają się na "logread -f":
Wed Jan 30 15:43:16 2019 kern.info kernel: [ 225.160869] rt3050-esw 10110000.esw: link changed 0x00
Wed Jan 30 15:43:20 2019 kern.info kernel: [ 229.493801] rt3050-esw 10110000.esw: link changed 0x10root@fd2wew:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel state DOWN qlen 1000
link/ether b0:4e:21:3c:4e:5a brd ff:ff:ff:ff:ff:ff
4: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
link/ether b0:4e:21:3c:4e:5a brd ff:ff:ff:ff:ff:ff
inet 192.168.171.1/24 brd 192.168.171.255 scope global br-lan
valid_lft forever preferred_lft forever
inet6 fe80::b24e:26ff:feeb:4e5a/64 scope link
valid_lft forever preferred_lft forever
5: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
link/ether b0:4e:21:3c:4e:5a brd ff:ff:ff:ff:ff:ff
inet6 fe80::b24e:26ff:feeb:4e5a/64 scope link
valid_lft forever preferred_lft forever47 2019-03-16 19:57:17
Temat: TL-WR902AC v.3 - brak IP na interfejsie WAN (7 odpowiedzi, napisanych Oprogramowanie / Software)
Witam,
wrzuciłem OpenWrt 18.06.2 na TL-WR902AC v.3 skonfigurowałem 'network' i 'wireless' (ap). Moge sie podpiąć do sieci Wifi jednak na interfejsie WAN rutera nie konfiguruje się IP z DHCP (normalnie jak przepinam ten kabel od WAN do laptopa z konfiguracją auto/auto, IP jest ustawiane i internet działa. Czy to jakiś znany defekt softu dla tego modelu TP czy może moja konfiguracja jest zła?
/etc/config/network
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config interface 'lan'
option type 'bridge'
option ifname 'eth0.1'
option proto 'static'
option ipaddr '192.168.171.1'
option netmask '255.255.255.0'
config device 'wan'
option name 'eth0.1'
option proto 'dhcp'
option peerdns '0'
option delegate '0'
option dns '1.1.1.1 9.9.9.9 149.112.112.112 1.0.0.1 8.8.8.8 8.8.4.4'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '4 6t'root@fd2wew:/etc/config# ifup wan
Interface wan not found
root@fd2wew:/etc/config# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN qlen 1000
link/ether b0:4e:21:3c:4e:5a brd ff:ff:ff:ff:ff:ff
inet6 fe80::b24e:26ff:feeb:4e5a/64 scope link
valid_lft forever preferred_lft forever
4: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
link/ether b0:4e:21:3c:4e:5a brd ff:ff:ff:ff:ff:ff
inet 192.168.171.1/24 brd 192.168.171.255 scope global br-lan
valid_lft forever preferred_lft forever
inet6 fe80::b24e:26ff:feeb:4e5a/64 scope link
valid_lft forever preferred_lft forever
5: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
link/ether b0:4e:22:11:4e:5a brd ff:ff:ff:ff:ff:ff
6: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
link/ether b0:4e:21:3c:4e:5a brd ff:ff:ff:ff:ff:ff
inet6 fe80::b24e:26ff:feeb:4e5a/64 scope link
valid_lft forever preferred_lft forever48 2018-09-17 06:57:44
Odp: OpenVPN w trybie TUN - generowanie *.ovpn (96 odpowiedzi, napisanych Oprogramowanie / Software)
Dlatego naturalnym wydało mi się pytanie o dodatkowe zabezpieczenie w postaci jakiejś autoryzacji, zamiast samego .ovpn bez hasła z kompletem kluczy
Nie chciałbym marnować czasu na ciągły i pewnie zawodny monitoring logów
Ale rozumiem że to o co spytalem się nie da albo głupie pytanie
49 2018-09-16 11:34:40
Odp: OpenVPN w trybie TUN - generowanie *.ovpn (96 odpowiedzi, napisanych Oprogramowanie / Software)
Widzę tylko problem z ciągłym monitoringiem takich połączeń, żeby unieważnić certyfikat musiałbym w porę wykryć że ktoś inny używa mojego pliku klienckiegi .ovpn
50 2018-09-16 10:56:43
Odp: OpenVPN w trybie TUN - generowanie *.ovpn (96 odpowiedzi, napisanych Oprogramowanie / Software)
Czy można tu dodać jakąś autoryzację aby mieć jakieś zabezpieczenie na wypadek dostania się pliku .ovpn w niepowołane ręce?
Znalezione posty: 26 do 50 z 84
Strony Poprzednia 1 2 3 4 Następna
eko.one.pl → Posty przez slawekw
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc