• Zarejestrowany: 2015-11-18
  • Posty: 87

Temat: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

OpenWrt 19.07.4, r11208-ce6496d796

Witam,
3ginfo pokazuje status:

root@dir505:/etc/config# 3ginfo
Status: Połączony
Czas polaczenia: 0d, 00:01:16
Przeslano danych: 0.0 B / 1.6 KiB
Operator: Orange
Tryb pracy: LTE
Sila sygnalu: 74%
Urzadzenie: huawei E3372
MCC MNC: 260 03
LAC: D30A (54026)
CID: 03A98E21 (61443617)
TAC: D30A (54026)
CSQ: 23
RSSI: -67 dBm
RSCP: -145 dBm
Ec/IO: -32 dB
RSRP: -99 dBm
SINR: 1 dB
RSRQ: -13 dB

jednak na interfejsie WAN w ogóle nie pojawia się IP publiczne (Orange)

Jak robię ifdown/ifup wan (lub reboot) nic sie nie zmienia, w logu pojawia się:

Sat Nov 14 21:42:13 2020 daemon.notice netifd: Interface 'wan' is now down
Sat Nov 14 21:42:13 2020 daemon.notice netifd: Interface 'wan' is disabled
Sat Nov 14 21:42:13 2020 daemon.notice netifd: Network device 'wwan0' link is down
Sat Nov 14 21:42:13 2020 daemon.notice netifd: Interface 'wan' has link connectivity loss
Sat Nov 14 21:42:25 2020 daemon.notice netifd: Interface 'wan' is enabled
Sat Nov 14 21:42:25 2020 daemon.notice netifd: Network device 'wwan0' link is up
Sat Nov 14 21:42:25 2020 daemon.notice netifd: Interface 'wan' has link connectivity

Poza tym w logu logi modulu:

Sat Nov 14 21:32:20 2020 kern.info kernel: [   13.238781] usbcore: registered new interface driver cdc_wdm
Sat Nov 14 21:32:20 2020 kern.info kernel: [   13.263498] Loading modules backported from Linux version v4.19.137-0-gc076c79e03c6
Sat Nov 14 21:32:20 2020 kern.info kernel: [   13.269788] Backport generated by backports.git v4.19.137-1-0-g60c3a249
Sat Nov 14 21:32:20 2020 kern.info kernel: [   13.312982] ip_tables: (C) 2000-2006 Netfilter Core Team
Sat Nov 14 21:32:20 2020 kern.info kernel: [   13.352107] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Sat Nov 14 21:32:20 2020 kern.info kernel: [   13.667772] xt_time: kernel timezone is -0000
Sat Nov 14 21:32:20 2020 kern.info kernel: [   13.679867] usbcore: registered new interface driver cdc_ether
Sat Nov 14 21:32:20 2020 kern.info kernel: [   13.717289] usbcore: registered new interface driver cdc_ncm
Sat Nov 14 21:32:20 2020 kern.info kernel: [   13.903464] huawei_cdc_ncm 1-1:1.1: MAC-Address: 00:1e:10:1f:00:00
Sat Nov 14 21:32:20 2020 kern.info kernel: [   13.908208] huawei_cdc_ncm 1-1:1.1: setting rx_max = 16384
Sat Nov 14 21:32:20 2020 kern.info kernel: [   13.940501] huawei_cdc_ncm 1-1:1.1: NDP will be placed at end of frame for this device.
Sat Nov 14 21:32:20 2020 kern.info kernel: [   13.947386] huawei_cdc_ncm 1-1:1.1: cdc-wdm0: USB WDM device
Sat Nov 14 21:32:20 2020 kern.info kernel: [   13.954151] huawei_cdc_ncm 1-1:1.1 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform-1, Huawei CDC NCM device, 00:1e:10:1f:00:00
Sat Nov 14 21:32:20 2020 kern.info kernel: [   13.965005] usbcore: registered new interface driver huawei_cdc_ncm
Sat Nov 14 21:32:20 2020 user.info kernel: [   14.070007] urngd: v1.0.2 started.
Sat Nov 14 21:32:20 2020 kern.info kernel: [   14.183825] PPP generic driver version 2.4.2
Sat Nov 14 21:32:20 2020 kern.info kernel: [   14.201007] NET: Registered protocol family 24

Czy mógłby ktoś zerknąć na moje ustawienie /etc/config/network czy coś tam jest nie tak jak powinno?

config interface 'lan'
        option ifname 'wlan0'
        option type 'bridge'
        option proto 'static'
        option ipaddr '192.168.202.193'
        option netmask '255.255.255.192'

config interface wan
        option ifname 'wwan0'
        option device  /dev/cdc-wdm0
        option apn     internet
        option proto   ncm
        option delay '10'
        option auto '1'

Access point dziala prawidłowo

Na "ip a" jest:

root@dir505:/etc/config# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether c8:d3:a3:5b:44:42 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel state DOWN qlen 1000
    link/ether c8:d3:a3:5b:44:43 brd ff:ff:ff:ff:ff:ff
4: wwan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN qlen 1000
    link/ether 00:1e:10:1f:00:00 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::21e:10ff:fe1f:0/64 scope link
       valid_lft forever preferred_lft forever
6: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
    link/ether c8:d3:a3:5b:44:42 brd ff:ff:ff:ff:ff:ff
    inet 192.168.202.193/26 brd 192.168.202.255 scope global br-lan
       valid_lft forever preferred_lft forever
    inet6 fe80::cad3:a3ff:fe5b:4442/64 scope link
       valid_lft forever preferred_lft forever
7: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
    link/ether c8:d3:a3:5b:44:42 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::cad3:a3ff:fe5b:4442/64 scope link
       valid_lft forever preferred_lft forever

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,230

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

Zmień /dev/cdc-wdm0 na /dev/ttyUSB0

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez slawekw

  • Zarejestrowany: 2015-11-18
  • Posty: 87

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

No właśnie tak chciałem pierwotnie (bo na innym ruterze, MR3020 używam właśnie /dev/ttyUSB0), ale na DIR-505 nie ma takiego urządzenia:

root@dir505:~# ls /dev/tty*
/dev/tty      /dev/ttyS1    /dev/ttyS12   /dev/ttyS15   /dev/ttyS4    /dev/ttyS7
/dev/ttyATH0  /dev/ttyS10   /dev/ttyS13   /dev/ttyS2    /dev/ttyS5    /dev/ttyS8
/dev/ttyS0    /dev/ttyS11   /dev/ttyS14   /dev/ttyS3    /dev/ttyS6    /dev/ttyS9

Tą nazwę urządzenie którą mam teraz wziąłem ze strony opisującej co prawda inny modem huawei i ten ruter, ale chociaż 3ginfo coś już wyświetla.
https://olibalam.blogspot.com/2018/08/d … enwrt.html

https://ctrlv.link/shots/2020/11/15/Q1Pc.png

Karta jest bez SIM, i internet z nią działa np. gdy włożę do telefonu.

Czy czegoś brakuje aby pojawiło się to urzędzenie ttyUSB0?

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,230

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

Pokaż wynik

cat /sys/kernel/debug/usb/devices

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez slawekw

  • Zarejestrowany: 2015-11-18
  • Posty: 87

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

root@dir505:~# cat /sys/kernel/debug/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 4.14
S:  Manufacturer=Linux 4.14.195 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1506 Rev= 1.02
S:  Manufacturer=HUAWEI_MOBILE
S:  Product=HUAWEI_MOBILE
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=03 Prot=12 Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=03 Prot=16 Driver=huawei_cdc_ncm
E:  Ad=83(I) Atr=03(Int.) MxPS=  16 Ivl=2ms
I:* If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=03 Prot=16 Driver=huawei_cdc_ncm
E:  Ad=83(I) Atr=03(Int.) MxPS=  16 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,230

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

Zrestartuj router i pokaż pełny wynik logread

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez slawekw

  • Zarejestrowany: 2015-11-18
  • Posty: 87

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

root@dir505:~# logread
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.000000] Linux version 4.14.195 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11208-ce6496d796)) #0 Sun Sep 6 16:19:39 2020
Sun Nov 15 16:00:23 2020 kern.debug kernel: [    0.000000] MyLoader: sysp=9ba9322f, boardp=42065c8a, parts=254dd0b6
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] SoC: Atheros AR9330 rev 1
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] Determined physical RAM map:
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000]  memory: 04000000 @ 00000000 (usable)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Sun Nov 15 16:00:23 2020 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Sun Nov 15 16:00:23 2020 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] Zone ranges:
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] Movable zone start for each node
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] Early memory node ranges
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Sun Nov 15 16:00:23 2020 kern.debug kernel: [    0.000000] On node 0 totalpages: 16384
Sun Nov 15 16:00:23 2020 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 804ecd40, node_mem_map 81000020
Sun Nov 15 16:00:23 2020 kern.debug kernel: [    0.000000]   Normal zone: 128 pages used for memmap
Sun Nov 15 16:00:23 2020 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Sun Nov 15 16:00:23 2020 kern.debug kernel: [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.000000] random: get_random_bytes called from 0x804f0740 with crng_init=0
Sun Nov 15 16:00:23 2020 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Sun Nov 15 16:00:23 2020 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.000000] Kernel command line:  board=DIR-505-A1 console=ttyATH0,115200 mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k@0x80000(firmware) rootfstype=squashfs noinitrd
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] Memory: 59320K/65536K available (3950K kernel code, 197K rwdata, 516K rodata, 320K init, 212K bss, 6216K reserved, 0K cma-reserved)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] NR_IRQS: 51
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.000013] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.007590] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.092190] pid_max: default: 32768 minimum: 301
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.096913] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.102970] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.112946] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.121056] futex hash table entries: 256 (order: -1, 3072 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.128579] NET: Registered protocol family 16
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.133439] MIPS: machine is D-Link DIR-505 rev. A1
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.679343] clocksource: Switched to clocksource MIPS
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.684343] NET: Registered protocol family 2
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.688493] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.693858] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.699919] TCP: Hash tables configured (established 1024 bind 1024)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.706167] UDP hash table entries: 256 (order: 0, 4096 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.711599] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.717839] NET: Registered protocol family 1
Sun Nov 15 16:00:23 2020 kern.debug kernel: [    0.721748] PCI: CLS 0 bytes, default 32
Sun Nov 15 16:00:23 2020 kern.warn kernel: [    0.726097] Crashlog allocated RAM at address 0x3f00000
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.731581] workingset: timestamp_bits=30 max_order=14 bucket_order=0
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.744142] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.748332] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.771006] io scheduler noop registered
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.773375] io scheduler deadline registered (default)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.778884] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.787520] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.795392] console [ttyATH0] enabled
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.802166] bootconsole [early0] disabled
Sun Nov 15 16:00:23 2020 kern.warn kernel: [    0.818961] m25p80 spi0.0: found mx25l6405d, expected m25p80
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.824158] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.828081] 6 cmdlinepart partitions found on MTD device spi0.0
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.834000] Creating 6 MTD partitions on "spi0.0":
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.838726] 0x000000000000-0x000000010000 : "u-boot"
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.845694] 0x000000010000-0x000000020000 : "art"
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.851828] 0x000000020000-0x000000030000 : "mac"
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.857017] 0x000000030000-0x000000040000 : "nvram"
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.863310] 0x000000040000-0x000000080000 : "language"
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.868982] 0x000000080000-0x000000800000 : "firmware"
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.884854] 2 uimage-fw partitions found on MTD device firmware
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.889381] 0x000000080000-0x000000203990 : "kernel"
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.895361] 0x000000203990-0x000000800000 : "rootfs"
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.900321] mtd: device 7 (rootfs) set to be root filesystem
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.904903] 1 squashfs-split partitions found on MTD device rootfs
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    0.911119] 0x000000470000-0x000000800000 : "rootfs_data"
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.921766] libphy: Fixed MDIO Bus: probed
Sun Nov 15 16:00:23 2020 kern.info kernel: [    0.946138] libphy: ag71xx_mdio: probed
Sun Nov 15 16:00:23 2020 kern.info kernel: [    1.570850] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch
Sun Nov 15 16:00:23 2020 kern.info kernel: [    1.612758] eth0: Atheros AG71xx at 0xba000000, irq 5, mode: gmii
Sun Nov 15 16:00:23 2020 kern.info kernel: [    2.241143] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
Sun Nov 15 16:00:23 2020 kern.info kernel: [    2.249731] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
Sun Nov 15 16:00:23 2020 kern.info kernel: [    2.257304] NET: Registered protocol family 10
Sun Nov 15 16:00:23 2020 kern.info kernel: [    2.266926] Segment Routing with IPv6
Sun Nov 15 16:00:23 2020 kern.info kernel: [    2.269268] NET: Registered protocol family 17
Sun Nov 15 16:00:23 2020 kern.info kernel: [    2.273727] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Sun Nov 15 16:00:23 2020 kern.info kernel: [    2.287319] 8021q: 802.1Q VLAN Support v1.8
Sun Nov 15 16:00:23 2020 kern.info kernel: [    2.293044] hctosys: unable to open rtc device (rtc0)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    2.303426] VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
Sun Nov 15 16:00:23 2020 kern.info kernel: [    2.311563] Freeing unused kernel memory: 320K
Sun Nov 15 16:00:23 2020 kern.warn kernel: [    2.314547] This architecture does not have kernel memory protection.
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    2.539368] random: fast init done
Sun Nov 15 16:00:23 2020 user.info kernel: [    3.282670] init: Console is alive
Sun Nov 15 16:00:23 2020 user.info kernel: [    3.284938] init: - watchdog -
Sun Nov 15 16:00:23 2020 user.info kernel: [    4.769696] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Sun Nov 15 16:00:23 2020 kern.info kernel: [    4.864454] usbcore: registered new interface driver usbfs
Sun Nov 15 16:00:23 2020 kern.info kernel: [    4.868631] usbcore: registered new interface driver hub
Sun Nov 15 16:00:23 2020 kern.info kernel: [    4.873997] usbcore: registered new device driver usb
Sun Nov 15 16:00:23 2020 kern.info kernel: [    4.885923] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sun Nov 15 16:00:23 2020 kern.info kernel: [    4.893281] ehci-platform: EHCI generic platform driver
Sun Nov 15 16:00:23 2020 kern.info kernel: [    4.897171] ehci-platform ehci-platform: EHCI Host Controller
Sun Nov 15 16:00:23 2020 kern.info kernel: [    4.902919] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Sun Nov 15 16:00:23 2020 kern.info kernel: [    4.912850] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Sun Nov 15 16:00:23 2020 kern.info kernel: [    4.939401] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Sun Nov 15 16:00:23 2020 kern.info kernel: [    4.945310] hub 1-0:1.0: USB hub found
Sun Nov 15 16:00:23 2020 kern.info kernel: [    4.948505] hub 1-0:1.0: 1 port detected
Sun Nov 15 16:00:23 2020 user.info kernel: [    4.953538] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Sun Nov 15 16:00:23 2020 user.info kernel: [    4.970012] init: - preinit -
Sun Nov 15 16:00:23 2020 kern.info kernel: [    5.637771] usb 1-1: new high-speed USB device number 2 using ehci-platform
Sun Nov 15 16:00:23 2020 kern.info kernel: [    5.855335] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    5.896638] random: procd: uninitialized urandom read (4 bytes read)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    7.930861] eth1: link up (100Mbps/Full duplex)
Sun Nov 15 16:00:23 2020 kern.info kernel: [    7.933983] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Sun Nov 15 16:00:23 2020 kern.notice kernel: [    9.351998] jffs2: notice: (436) jffs2_build_xattr_subsystem: complete building xattr subsystem, 14 of xdatum (3 unchecked, 11 orphan) and 49 of xref (10 dead, 2 orphan) found.
Sun Nov 15 16:00:23 2020 user.info kernel: [    9.370710] mount_root: switching to jffs2 overlay
Sun Nov 15 16:00:23 2020 kern.warn kernel: [    9.410766] overlayfs: upper fs does not support tmpfile.
Sun Nov 15 16:00:23 2020 user.warn kernel: [    9.424433] urandom-seed: Seeding with /etc/urandom.seed
Sun Nov 15 16:00:23 2020 kern.info kernel: [    9.683109] eth1: link down
Sun Nov 15 16:00:23 2020 user.info kernel: [    9.704313] procd: - early -
Sun Nov 15 16:00:23 2020 user.info kernel: [    9.705891] procd: - watchdog -
Sun Nov 15 16:00:23 2020 user.info kernel: [   10.544035] procd: - watchdog -
Sun Nov 15 16:00:23 2020 user.info kernel: [   10.546110] procd: - ubus -
Sun Nov 15 16:00:23 2020 kern.notice kernel: [   10.697939] random: jshn: uninitialized urandom read (4 bytes read)
Sun Nov 15 16:00:23 2020 kern.notice kernel: [   10.917118] random: ubusd: uninitialized urandom read (4 bytes read)
Sun Nov 15 16:00:23 2020 kern.notice kernel: [   10.924491] random: ubusd: uninitialized urandom read (4 bytes read)
Sun Nov 15 16:00:23 2020 user.info kernel: [   11.009529] procd: - init -
Sun Nov 15 16:00:23 2020 user.info kernel: [   13.195402] kmodloader: loading kernel modules from /etc/modules.d/*
Sun Nov 15 16:00:23 2020 kern.info kernel: [   13.471436] ip6_tables: (C) 2000-2006 Netfilter Core Team
Sun Nov 15 16:00:23 2020 kern.info kernel: [   13.514262] usbcore: registered new interface driver cdc_wdm
Sun Nov 15 16:00:23 2020 kern.info kernel: [   13.540950] Loading modules backported from Linux version v4.19.137-0-gc076c79e03c6
Sun Nov 15 16:00:23 2020 kern.info kernel: [   13.547156] Backport generated by backports.git v4.19.137-1-0-g60c3a249
Sun Nov 15 16:00:23 2020 kern.info kernel: [   13.593530] ip_tables: (C) 2000-2006 Netfilter Core Team
Sun Nov 15 16:00:23 2020 kern.info kernel: [   13.628146] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Sun Nov 15 16:00:23 2020 kern.info kernel: [   13.940904] xt_time: kernel timezone is -0000
Sun Nov 15 16:00:23 2020 kern.info kernel: [   13.959511] usbcore: registered new interface driver cdc_ether
Sun Nov 15 16:00:23 2020 kern.info kernel: [   13.985949] usbcore: registered new interface driver cdc_ncm
Sun Nov 15 16:00:23 2020 kern.info kernel: [   14.193395] huawei_cdc_ncm 1-1:1.1: MAC-Address: 00:1e:10:1f:00:00
Sun Nov 15 16:00:23 2020 kern.info kernel: [   14.198141] huawei_cdc_ncm 1-1:1.1: setting rx_max = 16384
Sun Nov 15 16:00:23 2020 kern.info kernel: [   14.236670] huawei_cdc_ncm 1-1:1.1: NDP will be placed at end of frame for this device.
Sun Nov 15 16:00:23 2020 kern.info kernel: [   14.243619] huawei_cdc_ncm 1-1:1.1: cdc-wdm0: USB WDM device
Sun Nov 15 16:00:23 2020 kern.info kernel: [   14.250347] huawei_cdc_ncm 1-1:1.1 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform-1, Huawei CDC NCM device, 00:1e:10:1f:00:00
Sun Nov 15 16:00:23 2020 kern.info kernel: [   14.261192] usbcore: registered new interface driver huawei_cdc_ncm
Sun Nov 15 16:00:23 2020 user.info kernel: [   14.337488] urngd: v1.0.2 started.
Sun Nov 15 16:00:23 2020 kern.info kernel: [   14.483235] PPP generic driver version 2.4.2
Sun Nov 15 16:00:23 2020 kern.info kernel: [   14.510853] NET: Registered protocol family 24
Sun Nov 15 16:00:23 2020 kern.debug kernel: [   14.663596] ath: EEPROM regdomain: 0x0
Sun Nov 15 16:00:23 2020 kern.debug kernel: [   14.663610] ath: EEPROM indicates default country code should be used
Sun Nov 15 16:00:23 2020 kern.debug kernel: [   14.663615] ath: doing EEPROM country->regdmn map search
Sun Nov 15 16:00:23 2020 kern.debug kernel: [   14.663635] ath: country maps to regdmn code: 0x3a
Sun Nov 15 16:00:23 2020 kern.debug kernel: [   14.663643] ath: Country alpha2 being used: US
Sun Nov 15 16:00:23 2020 kern.debug kernel: [   14.663648] ath: Regpair used: 0x3a
Sun Nov 15 16:00:23 2020 kern.debug kernel: [   14.678414] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sun Nov 15 16:00:23 2020 kern.info kernel: [   14.681435] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Sun Nov 15 16:00:23 2020 user.info kernel: [   14.770037] kmodloader: done loading kernel modules from /etc/modules.d/*
Sun Nov 15 16:00:23 2020 kern.notice kernel: [   15.356861] random: crng init done
Sun Nov 15 16:00:23 2020 kern.notice kernel: [   15.358825] random: 6 urandom warning(s) missed due to ratelimiting
Sun Nov 15 16:00:27 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Sun Nov 15 16:00:27 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: started, version 2.80 cachesize 150
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: DNS service limited to local subnets
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: using local addresses only for domain test
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: using local addresses only for domain onion
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: using local addresses only for domain localhost
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: using local addresses only for domain local
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: using local addresses only for domain invalid
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: using local addresses only for domain bind
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: using local addresses only for domain lan
Sun Nov 15 16:00:28 2020 daemon.warn dnsmasq[1010]: no servers found in /tmp/resolv.conf.auto, will retry
Sun Nov 15 16:00:28 2020 daemon.info dnsmasq[1010]: read /etc/hosts - 4 addresses
Sun Nov 15 16:00:29 2020 daemon.info dnsmasq[1010]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Sun Nov 15 16:00:29 2020 authpriv.info dropbear[1062]: Not backgrounding
Sun Nov 15 16:00:32 2020 user.notice : Added device handler type: 8021ad
Sun Nov 15 16:00:32 2020 user.notice : Added device handler type: 8021q
Sun Nov 15 16:00:32 2020 user.notice : Added device handler type: macvlan
Sun Nov 15 16:00:32 2020 user.notice : Added device handler type: veth
Sun Nov 15 16:00:32 2020 user.notice : Added device handler type: bridge
Sun Nov 15 16:00:32 2020 user.notice : Added device handler type: Network device
Sun Nov 15 16:00:32 2020 user.notice : Added device handler type: tunnel
Sun Nov 15 16:00:36 2020 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Sun Nov 15 16:00:36 2020 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Sun Nov 15 16:00:36 2020 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Sun Nov 15 16:00:36 2020 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Sun Nov 15 16:00:36 2020 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Sun Nov 15 16:00:36 2020 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Sun Nov 15 16:00:37 2020 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Sun Nov 15 16:00:37 2020 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Sun Nov 15 16:00:38 2020 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Sun Nov 15 16:00:38 2020 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Sun Nov 15 16:00:38 2020 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Sun Nov 15 16:00:40 2020 daemon.warn netifd: You have delegated IPv6-prefixes but haven't assigned them to any interface. Did you forget to set option ip6assign on your lan-interfaces?
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'loopback' is enabled
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'loopback' is setting up now
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'loopback' is now up
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'wan' is enabled
Sun Nov 15 16:00:40 2020 kern.info kernel: [   36.101207] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'lan' is enabled
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'lan' is setting up now
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'lan' is now up
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Network device 'lo' link is up
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'loopback' has link connectivity
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Network device 'wwan0' link is up
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'wan' has link connectivity
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'wan' is setting up now
Sun Nov 15 16:00:40 2020 daemon.notice netifd: Interface 'wan' is now up
Sun Nov 15 16:00:41 2020 daemon.err odhcpd[1173]: Failed to send to ff02::1%lan@br-lan (Permission denied)
Sun Nov 15 16:00:42 2020 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sun Nov 15 16:00:43 2020 daemon.info procd: - init complete -
Sun Nov 15 16:00:44 2020 user.notice firewall: Reloading firewall due to ifup of wan (wwan0)
Sun Nov 15 16:00:45 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sun Nov 15 16:00:45 2020 kern.info kernel: [   41.153492] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sun Nov 15 16:00:45 2020 kern.info kernel: [   41.187391] br-lan: port 1(wlan0) entered blocking state
Sun Nov 15 16:00:45 2020 kern.info kernel: [   41.191362] br-lan: port 1(wlan0) entered disabled state
Sun Nov 15 16:00:45 2020 kern.info kernel: [   41.197030] device wlan0 entered promiscuous mode
Sun Nov 15 16:00:45 2020 daemon.err hostapd: Using interface wlan0 with hwaddr c8:d3:a3:5b:44:42 and ssid "dir-505"
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1010]: exiting on receipt of SIGTERM
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: started, version 2.80 cachesize 150
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: DNS service limited to local subnets
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: using local addresses only for domain test
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: using local addresses only for domain onion
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: using local addresses only for domain localhost
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: using local addresses only for domain local
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: using local addresses only for domain invalid
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: using local addresses only for domain bind
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: using local addresses only for domain lan
Sun Nov 15 16:00:46 2020 daemon.warn dnsmasq[1625]: no servers found in /tmp/resolv.conf.auto, will retry
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: read /etc/hosts - 4 addresses
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: read /etc/hosts - 4 addresses
Sun Nov 15 16:00:46 2020 daemon.info dnsmasq[1625]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Sun Nov 15 16:00:46 2020 kern.info kernel: [   42.405644] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sun Nov 15 16:00:46 2020 kern.info kernel: [   42.411037] br-lan: port 1(wlan0) entered blocking state
Sun Nov 15 16:00:46 2020 kern.info kernel: [   42.415853] br-lan: port 1(wlan0) entered forwarding state
Sun Nov 15 16:00:46 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sun Nov 15 16:00:46 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sun Nov 15 16:00:46 2020 daemon.notice netifd: bridge 'br-lan' link is up
Sun Nov 15 16:00:46 2020 daemon.notice netifd: Interface 'lan' has link connectivity
Sun Nov 15 16:00:46 2020 kern.info kernel: [   42.439835] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Sun Nov 15 16:00:47 2020 daemon.notice netifd: Network device 'wlan0' link is up
Sun Nov 15 16:00:47 2020 daemon.err odhcpd[1173]: Failed to send to ff02::1%lan@br-lan (Address not available)
Sun Nov 15 16:00:50 2020 daemon.info hostapd: wlan0: STA 68:94:23:8b:95:8d IEEE 802.11: authenticated
Sun Nov 15 16:00:50 2020 daemon.info hostapd: wlan0: STA 68:94:23:8b:95:8d IEEE 802.11: associated (aid 1)
Sun Nov 15 16:00:50 2020 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 68:94:23:8b:95:8d
Sun Nov 15 16:00:50 2020 daemon.info hostapd: wlan0: STA 68:94:23:8b:95:8d WPA: pairwise key handshake completed (RSN)
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1625]: exiting on receipt of SIGTERM
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: started, version 2.80 cachesize 150
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: DNS service limited to local subnets
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq-dhcp[1723]: DHCP, IP range 192.168.202.228 -- 192.168.202.254, lease time 12h
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: using local addresses only for domain test
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: using local addresses only for domain onion
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: using local addresses only for domain localhost
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: using local addresses only for domain local
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: using local addresses only for domain invalid
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: using local addresses only for domain bind
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: using local addresses only for domain lan
Sun Nov 15 16:00:52 2020 daemon.warn dnsmasq[1723]: no servers found in /tmp/resolv.conf.auto, will retry
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: read /etc/hosts - 4 addresses
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq-dhcp[1723]: read /etc/ethers - 0 addresses
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: read /etc/hosts - 4 addresses
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq[1723]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Sun Nov 15 16:00:52 2020 daemon.info dnsmasq-dhcp[1723]: read /etc/ethers - 0 addresses
Sun Nov 15 16:00:55 2020 daemon.info dnsmasq-dhcp[1723]: DHCPREQUEST(br-lan) 192.168.1.164 68:94:23:8b:95:8d
Sun Nov 15 16:00:55 2020 daemon.info dnsmasq-dhcp[1723]: DHCPNAK(br-lan) 192.168.1.164 68:94:23:8b:95:8d wrong network
Sun Nov 15 16:00:58 2020 daemon.info dnsmasq-dhcp[1723]: DHCPDISCOVER(br-lan) 68:94:23:8b:95:8d
Sun Nov 15 16:00:58 2020 daemon.info dnsmasq-dhcp[1723]: DHCPOFFER(br-lan) 192.168.202.253 68:94:23:8b:95:8d
Sun Nov 15 16:00:58 2020 daemon.info dnsmasq-dhcp[1723]: DHCPREQUEST(br-lan) 192.168.202.253 68:94:23:8b:95:8d
Sun Nov 15 16:00:58 2020 daemon.info dnsmasq-dhcp[1723]: DHCPACK(br-lan) 192.168.202.253 68:94:23:8b:95:8d Moni
Sun Nov 15 16:01:00 2020 authpriv.info dropbear[1762]: Child connection from 192.168.202.253:3348
Sun Nov 15 16:01:07 2020 authpriv.notice dropbear[1762]: Password auth succeeded for 'root' from 192.168.202.253:3348
root@dir505:~#

8 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,230

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

Nie wyłączyłeś sobie interfejsów w tym modemie?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

9 Odpowiedź przez slawekw

  • Zarejestrowany: 2015-11-18
  • Posty: 87

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

W którym miejsciu mogłyby one być wyłączone? Konfiguracja /etc/config/network jest taka jak w moim pierwszym poście.

Tylko z modem LTE nie dziala internet (pomimo ze widac status 3ginfo to zadne dane nie "latają" bo nie podnosi sie publiczne IP z Orange)

Jeśli zmienię w network to:

config interface 'lan'
        option ifname  'wlan0'
        option type    'bridge'
        option proto   'static'
        option ipaddr  '192.168.202.193'
        option netmask '255.255.255.192'

config interface 'wan'
        option ifname  'wwan0'
        option device  '/dev/cdc-wdm0'
        option apn     'internet'
        option proto   'ncm'
        option delay   '10'
        option auto    '1'

na to:

config interface 'lan'
        option type 'bridge'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'
        option ip6assign '60'

config interface 'wan'
        option proto 'dhcp'
        option ifname 'eth1'

i podepnę port Ethernet (wtedy WAN) do mojej sieci domowej, to internet dziala przez moj domowyh ISP ok.

10 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,230

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

Nie w openwrt, w modemie. Przez at^setport możliwe jest sterowanie interfejsami które modem udostępnia, poszukaj na forum.

Pytanie tylko czy mając /dev/cdc-wdm* jesteś jeszcze w stanie pogadać z modemem poleceniami AT. Czy ten modem podłączony do windowsa działa? Czy możesz w sofcie włączyć inne interfejsy?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

11 Odpowiedź przez slawekw

  • Zarejestrowany: 2015-11-18
  • Posty: 87

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

podpiąłem modem pod windowsa, windows ładnie instalauje dla niego sterownik i moge sie podpiac do sieci orange bez problemu.

podpialem sie też puttym na serial port ktory sie pojawia po wpięciu modemu do laptopa, tj.

c:\>mode

Stan urządzenia COM10:
----------------------
    Szybkość transmisji:             0
    Parzystość:                      None
    Bity danych:                     0
    Bity  stopu:                     1
    Limit czasu:                     OFF
    XON/XOFF:                        OFF
    Uzgadnianie CTS:                 OFF
    Uzgadnianie DSR:                 OFF
    Czułość DSR:                     OFF
    Obwód DTR:                       ON
    Obwód RTS:                       ON

i kilka komend AT odpalilem ladnie pokazuja stan modemu:

^RSSI:24

^HCSQ:"LTE",57,47,96,18

^RSSI:24

^HCSQ:"LTE",57,46,106,16

^RSSI:26

^HCSQ:"LTE",60,47,91,12

^RSSI:24

^HCSQ:"LTE",57,46,101,16

^RSSI:25

^HCSQ:"LTE",58,46,96,14

^RSSI:24

^HCSQ:"LTE",57,46,96,14

^RSSI:25

^HCSQ:"LTE",58,47,86,16

^RSSI:25

^HCSQ:"LTE",58,46,91,14

^RSSI:25

^HCSQ:"LTE",59,47,91,14

OK

^RSSI:25

^HCSQ:"LTE",58,47,96,16

^RSSI:24

^HCSQ:"LTE",57,46,86,16
ATI
Manufacturer: huawei
Model: E3372
Revision: 21.180.01.00.00
IMEI: xxxxxxxxxxxxxxxxx
+GCAP: +CGSM,+DS,+ES

OK

^RSSI:25

^HCSQ:"LTE",58,47,101,16
AT^FHVER
^FHVER:"E3372H-153 21.180.01.00.00,CL2E3372HM Ver.A"

OK

^RSSI:24

^HCSQ:"LTE",57,47,96,18

^RSSI:24

^HCSQ:"LTE",57,47,96,16
AT^VERSION?
^VERSION:BDT:Sep 30 2014, 15:17:21
^VERSION:EXTS:21.180.01.00.00
^VERSION:INTS:
^VERSION:EXTD:WEBUI_17.100.06.00.03_Hilink_V7R2_9x25_CPIO
^VERSION:INTD:
^VERSION:EXTH:CL2E3372HM Ver.A
^VERSION:INTH:
^VERSION:EXTU:E3372
^VERSION:INTU:
^VERSION:CFG:1004
^VERSION:PRL:
^VERSION:OEM:
^VERSION:INI:

OK

12 Odpowiedź przez slawekw

  • Zarejestrowany: 2015-11-18
  • Posty: 87

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

AT^SETPORT?
^SETPORT:FF;12,16

OK

czy te ustawienia są ok?

13 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,230

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

Domyślnie sa inne: https://eko.one.pl/forum/viewtopic.php?id=11711 brakuje "1"

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

14 Odpowiedź przez slawekw

  • Zarejestrowany: 2015-11-18
  • Posty: 87

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

Nie zmienialem ustawień portów tego modemu - znalazlem, że ustawiałem je tak w 2015 roku (wyłączałem niepotrzebne porty w tym slot na kartę sd czy "cd")
http://blog.asiantuntijakaveri.fi/2015/ … -from.html

Ale pogrzebałem jeszcze i znalazłem jedną paczkę:
comgt-ncm - 0.32-32 - NCM 3G/4G Support - po jej doinstalowaniu IP z Orange się konfiguruje na interfejsie WAN

root@dir505:~# opkg list-installed|grep ncm
kmod-usb-net-cdc-ncm - 4.14.195-1
kmod-usb-net-huawei-cdc-ncm - 4.14.195-1
root@dir505:~# opkg list|grep ncm
comgt-ncm - 0.32-32 - NCM 3G/4G Support
kmod-usb-net-cdc-ncm - 4.14.195-1 - Kernel support for CDC NCM connections
kmod-usb-net-cdc-ncm - 4.14.195-1 - Kernel support for CDC NCM connections
kmod-usb-net-huawei-cdc-ncm - 4.14.195-1 - Kernel support for Huawei CDC NCM connections
kmod-usb-net-huawei-cdc-ncm - 4.14.195-1 - Kernel support for Huawei CDC NCM connections
luci-proto-ncm - git-20.319.48994-50b7ab5-1 - Support for NCM
root@dir505:~# opkg install comgt-ncm
Installing comgt-ncm (0.32-32) to root...
Downloading http://downloads.openwrt.org/releases/19.07.4/targets/ar71xx/generic/packages/comgt-ncm_0.32-32_mips_24kc.ipk
Installing kmod-usb-serial (4.14.195-1) to root...
Downloading http://downloads.openwrt.org/releases/19.07.4/targets/ar71xx/generic/kmods/4.14.195-1-342af9e4f67b3447c53216ab8e3b12a1/kmod-usb-serial_4.14.195-1_mips_24kc.ipk
Installing kmod-usb-serial-wwan (4.14.195-1) to root...
Downloading http://downloads.openwrt.org/releases/19.07.4/targets/ar71xx/generic/kmods/4.14.195-1-342af9e4f67b3447c53216ab8e3b12a1/kmod-usb-serial-wwan_4.14.195-1_mips_24kc.ipk
Installing kmod-usb-serial-option (4.14.195-1) to root...
Downloading http://downloads.openwrt.org/releases/19.07.4/targets/ar71xx/generic/kmods/4.14.195-1-342af9e4f67b3447c53216ab8e3b12a1/kmod-usb-serial-option_4.14.195-1_mips_24kc.ipk
Configuring kmod-usb-serial.
Configuring kmod-usb-serial-wwan.
Configuring kmod-usb-serial-option.
Configuring comgt-ncm.
root@dir505:~# df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root                 2560      2560         0 100% /rom
tmpfs                    29820       932     28888   3% /tmp
/dev/mtdblock8            3648       696      2952  19% /overlay
overlayfs:/overlay        3648       696      2952  19% /
tmpfs                      512         0       512   0% /dev
root@dir505:~# cp network_orange /etc/config/network
root@dir505:~# /etc/init.d/network restart
Connection reset by 192.168.1.1 port 22


(logowanie ponowne)


root@dir505:~# ping wp.pl
PING wp.pl (212.77.98.9): 56 data bytes
64 bytes from 212.77.98.9: seq=0 ttl=55 time=31.625 ms
64 bytes from 212.77.98.9: seq=1 ttl=55 time=41.251 ms
64 bytes from 212.77.98.9: seq=2 ttl=55 time=41.914 ms

--- wp.pl ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 31.625/38.263/41.914 ms
root@dir505:~#

Jedyny efekt "uboczny" jakis zaobserwowałem to że 3ginfo teraz nie pokazuje parametrów modemu (widać tylko traffic):

root@dir505:~# 3ginfo
Status: Połączony
Czas polaczenia: 0d, 00:34:10
Przeslano danych: 56.4 MiB / 16.8 MiB
Operator: ---
Tryb pracy: -
Sila sygnalu: 0%
Urzadzenie:
MCC MNC: - -
LAC: - (-)
CID: - (-)
TAC: - (-)
CSQ: -
RSSI: - dBm
RSCP: - dBm
Ec/IO: - dB
RSRP: - dBm
SINR: - dB
RSRQ: - dB

15 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,230

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

No to jak poprzednio miałeś bez ncm? Ustawiłeś proto ncm a nie doinstalowałeś pakietu do jego obsługi?

W 3ginfo MUSI być ustanowiony inny interfejs niż jest wykorzystywany do połączenia. Inaczej nie może rozmawiać z modemem przy pomocy poleceń AT.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

16 Odpowiedź przez slawekw

  • Zarejestrowany: 2015-11-18
  • Posty: 87

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

Poprzednio były zainstalowane paczki ncm ale nie ta brakująca.
Zresztą jechalem z instrukacjami ktore w ogóle o niej nie mówiły - były za to te moduly w procedurach które mialem zainstalowane:

kmod-usb-net-cdc-ncm - 4.14.195-1
kmod-usb-net-huawei-cdc-ncm - 4.14.195-1

Nie wiem, moze nie trafilem na stronę z właściwymi instrukcjami, więc robilem trochę po omacku.

17 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,230

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

Trzeba było spojrzeć na eko.one.pl a nie szukać po innych stronach...

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

18 Odpowiedź przez slawekw

  • Zarejestrowany: 2015-11-18
  • Posty: 87

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

ok, widzę, że pojawił się również /dev/ttyUSB0 - jak go skonfgurowalem w 3ginfo to juz dziala ok.

Jaka jest różnica między cdc-wdm0 i ttyUSB0? Ma to znaczenie który z tych dwóch plików urządzeń jest ustawiony w /etc/config/network?

root@dir505:~# 3ginfo
Status: Połączony
Czas polaczenia: 0d, 00:30:21
Przeslano danych: 103.2 MiB / 143.5 MiB
Operator: Orange
Tryb pracy: LTE
Sila sygnalu: 100%
Urzadzenie: huawei E3372
MCC MNC: 260 03
LAC: D30A (54026)
CID: 03A98D15 (61443349)
TAC: D30A (54026)
CSQ: 31
RSSI: -51 dBm
RSCP: -145 dBm
Ec/IO: -32 dB
RSRP: -81 dBm
SINR: -2 dB
RSRQ: -14 dB
root@dir505:~#

19 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,230

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

W tym konkretnym przypadku to po prostu inne interfejsy szeregowe. Dla modemów z qmi to /dev/cdc-wdm0 jest jest interfejsem komunikacyjnym.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

20 Odpowiedź przez slawekw

  • Zarejestrowany: 2015-11-18
  • Posty: 87

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

Cezary napisał/a:

Trzeba było spojrzeć na eko.one.pl a nie szukać po innych stronach...

próbowałem jechać z eko.one.pl
np. https://eko.one.pl/?p=openwrt-modemylte

ale tam chyba nie ma tej paczku którą doisntalowalem.
Czy może jest jakaś inna instrukcja do tego modemu E3372?

Czy moze powinienem byl to zrobic inaczej jeszcze - bez tej doinstalowanej paczki?

21 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,230

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

Jak zwykle pod latarnią najciemniej: https://eko.one.pl/?p=openwrt-3g to jest link nad tym który podałeś na eko.one.pl

A ty spojrzałeś po prostu na spis modemów który nie był aktualizowany od 6 lat...

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

22 Odpowiedź przez slawekw

  • Zarejestrowany: 2015-11-18
  • Posty: 87

Odp: Modem LTE Huawei E3372 + D-Link DIR-505: brak WAN IP

fakt, keirowalem się pozycjonowaniem google, zwracał mi tamten stary link jako pierwszy  ;-)