Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Oprogramowanie / Software → OpenWRT i LUCi
Strony Poprzednia 1 2 3 4 5 6 Następna
Zaloguj się lub zarejestruj by napisać odpowiedź
Witam,
Tak jak pisałem, jestem green. OpenWRT zastosowałem bo chciałem mieć server FTP na routerku i działało dzięki opisanym procedurom na stronie. Mówisz nieznanym dla mnie językiem.
Czy jest możliwość otrzymania poprzedniej wersji kompilacji obrazu z września ? Udało mi się załadować oryginalny soft za pomocą sysupgrade, ale mimo wszystko chciałbym jednak mieć OpenWRT, a na tamtej wersji wszystko chulało
Nie, nie przechowuję kopii archiwalnych obrazów. Ale ponieważ u mnie chodzi to u Ciebie też musi.
Zaloguj przez telnet lub ssh jeżeli ustawiłeś hasło i wykonaj po prostu polecenie logread. I pokaż co wypisał.
Witam
U mnie też nie działa luci
To jest to co wypisuje logread
root@OpenWrt:~# logread
Jan 1 01:00:08 OpenWrt user.warn kernel: Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Jan 1 01:00:08 OpenWrt user.warn kernel: Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Jan 1 01:00:08 OpenWrt user.info kernel: Writing ErrCtl register=00000000
Jan 1 01:00:08 OpenWrt user.info kernel: Readback ErrCtl register=00000000
Jan 1 01:00:08 OpenWrt user.info kernel: Memory: 29304k/32768k available (2111k kernel code, 3464k reserved, 397k data, 152k init, 0k highmem)
Jan 1 01:00:08 OpenWrt user.info kernel: SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan 1 01:00:08 OpenWrt user.info kernel: Hierarchical RCU implementation.
Jan 1 01:00:08 OpenWrt user.info kernel: NR_IRQS:56
Jan 1 01:00:08 OpenWrt user.info kernel: Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Jan 1 01:00:08 OpenWrt user.warn kernel: Mount-cache hash table entries: 512
Jan 1 01:00:08 OpenWrt user.info kernel: NET: Registered protocol family 16
Jan 1 01:00:08 OpenWrt user.notice kernel: MIPS: machine is TP-LINK TL-WR1043ND
Jan 1 01:00:08 OpenWrt user.warn kernel: bio: create slab <bio-0> at 0
Jan 1 01:00:08 OpenWrt user.info kernel: Switching to clocksource MIPS
Jan 1 01:00:08 OpenWrt user.info kernel: NET: Registered protocol family 2
Jan 1 01:00:08 OpenWrt user.info kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:00:08 OpenWrt user.info kernel: TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Jan 1 01:00:08 OpenWrt user.info kernel: TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:00:08 OpenWrt user.info kernel: TCP: Hash tables configured (established 1024 bind 1024)
Jan 1 01:00:08 OpenWrt user.info kernel: TCP reno registered
Jan 1 01:00:08 OpenWrt user.info kernel: NET: Registered protocol family 1
Jan 1 01:00:08 OpenWrt user.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan 1 01:00:08 OpenWrt user.warn kernel: Registering mini_fo version $Id$
Jan 1 01:00:08 OpenWrt user.info kernel: JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
Jan 1 01:00:08 OpenWrt user.warn kernel: yaffs Oct 10 2010 13:13:33 Installing.
Jan 1 01:00:08 OpenWrt user.info kernel: msgmni has been set to 57
Jan 1 01:00:08 OpenWrt user.info kernel: io scheduler noop registered
Jan 1 01:00:08 OpenWrt user.info kernel: io scheduler deadline registered (default)
Jan 1 01:00:08 OpenWrt user.info kernel: Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Jan 1 01:00:08 OpenWrt user.info kernel: serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
Jan 1 01:00:08 OpenWrt user.info kernel: console [ttyS0] enabled, bootconsole disabled
Jan 1 01:00:08 OpenWrt user.info kernel: Atheros AR71xx SPI Controller driver version 0.2.4
Jan 1 01:00:08 OpenWrt user.info kernel: m25p80 spi0.0: m25p64 (8192 Kbytes)
Jan 1 01:00:08 OpenWrt user.debug kernel: spi0.0: searching for MyLoader partition table at offset 0x10000
Jan 1 01:00:08 OpenWrt user.debug kernel: spi0.0: searching for MyLoader partition table at offset 0x20000
Jan 1 01:00:08 OpenWrt user.debug kernel: spi0.0: searching for MyLoader partition table at offset 0x30000
Jan 1 01:00:08 OpenWrt user.debug kernel: spi0.0: searching for MyLoader partition table at offset 0x40000
Jan 1 01:00:08 OpenWrt user.debug kernel: spi0.0: no MyLoader partition table found
Jan 1 01:00:08 OpenWrt user.notice kernel: Searching for RedBoot partition table in spi0.0 at offset 0x7e0000
Jan 1 01:00:08 OpenWrt user.notice kernel: Searching for RedBoot partition table in spi0.0 at offset 0x7f0000
Jan 1 01:00:08 OpenWrt user.notice kernel: No RedBoot partition table detected in spi0.0
Jan 1 01:00:08 OpenWrt user.notice kernel: spi0.0: no WRT160NL signature found
Jan 1 01:00:08 OpenWrt user.notice kernel: Creating 5 MTD partitions on "spi0.0":
Jan 1 01:00:08 OpenWrt user.notice kernel: 0x000000000000-0x000000020000 : "u-boot"
Jan 1 01:00:08 OpenWrt user.notice kernel: 0x000000020000-0x000000160000 : "kernel"
Jan 1 01:00:08 OpenWrt user.notice kernel: 0x000000160000-0x0000007f0000 : "rootfs"
Jan 1 01:00:08 OpenWrt user.notice kernel: mtd: partition "rootfs" set to be root filesystem
Jan 1 01:00:08 OpenWrt user.info kernel: mtd: partition "rootfs_data" created automatically, ofs=480000, len=370000
Jan 1 01:00:08 OpenWrt user.notice kernel: 0x000000480000-0x0000007f0000 : "rootfs_data"
Jan 1 01:00:08 OpenWrt user.notice kernel: 0x0000007f0000-0x000000800000 : "art"
Jan 1 01:00:08 OpenWrt user.notice kernel: 0x000000020000-0x0000007f0000 : "firmware"
Jan 1 01:00:08 OpenWrt user.notice kernel: Realtek RTL8366RB ethernet switch driver version 0.2.2
Jan 1 01:00:08 OpenWrt user.info kernel: rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
Jan 1 01:00:08 OpenWrt user.info kernel: rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
Jan 1 01:00:08 OpenWrt user.info kernel: rtl8366rb: probed
Jan 1 01:00:08 OpenWrt user.info kernel: eth0: Atheros AG71xx at 0xb9000000, irq 4
Jan 1 01:00:08 OpenWrt user.debug kernel: eth0: using fixed link parameters
Jan 1 01:00:08 OpenWrt user.info kernel: Atheros AR71xx hardware watchdog driver version 0.1.0
Jan 1 01:00:08 OpenWrt user.debug kernel: ar71xx-wdt: timeout=15 secs (max=21)
Jan 1 01:00:08 OpenWrt user.info kernel: TCP westwood registered
Jan 1 01:00:08 OpenWrt user.info kernel: NET: Registered protocol family 17
Jan 1 01:00:08 OpenWrt user.info kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Jan 1 01:00:08 OpenWrt user.info kernel: All bugs added by David S. Miller <davem@redhat.com>
Jan 1 01:00:08 OpenWrt user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Jan 1 01:00:08 OpenWrt user.info kernel: Freeing unused kernel memory: 152k freed
Jan 1 01:00:08 OpenWrt user.warn kernel: Please be patient, while OpenWrt loads ...
Jan 1 01:00:08 OpenWrt user.info kernel: gpio-buttons driver version 0.1.2
Jan 1 01:00:08 OpenWrt user.info kernel: input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Jan 1 01:00:08 OpenWrt user.info kernel: Button Hotplug driver version 0.3.1
Jan 1 01:00:08 OpenWrt user.debug kernel: ar71xx: pll_reg 0xb8050014: 0x1a000000
Jan 1 01:00:08 OpenWrt user.info kernel: eth0: link up (1000Mbps/Full duplex)
Jan 1 01:00:08 OpenWrt user.info kernel: Registered led device: tl-wr1043nd:green:usb
Jan 1 01:00:08 OpenWrt user.info kernel: Registered led device: tl-wr1043nd:green:system
Jan 1 01:00:08 OpenWrt user.info kernel: Registered led device: tl-wr1043nd:green:qss
Jan 1 01:00:08 OpenWrt user.info kernel: Registered led device: tl-wr1043nd:green:wlan
Jan 1 01:00:08 OpenWrt user.info kernel: mini_fo: using base directory: /
Jan 1 01:00:08 OpenWrt user.info kernel: mini_fo: using storage directory: /overlay
Jan 1 01:00:08 OpenWrt user.info kernel: eth0: link down
Jan 1 01:00:08 OpenWrt user.debug kernel: ar71xx: pll_reg 0xb8050014: 0x1a000000
Jan 1 01:00:08 OpenWrt user.info kernel: eth0: link up (1000Mbps/Full duplex)
Jan 1 01:00:09 OpenWrt user.info kernel: device eth0.1 entered promiscuous mode
Jan 1 01:00:09 OpenWrt user.info kernel: device eth0 entered promiscuous mode
Jan 1 01:00:09 OpenWrt user.info kernel: br-lan: port 1(eth0.1) entering forwarding state
Jan 1 01:00:09 OpenWrt user.info kernel: Compat-wireless backport release: compat-wireless--2010-09-02-9-gf63dbfd
Jan 1 01:00:09 OpenWrt user.info kernel: Backport based on wireless-2.6.git v2.6.36-rc4-47529-g4697e4e
Jan 1 01:00:10 OpenWrt user.info kernel: cfg80211: Calling CRDA to update world regulatory domain
Jan 1 01:00:11 OpenWrt user.notice kernel: SCSI subsystem initialized
Jan 1 01:00:11 OpenWrt user.info sysinit: 0.openwrt.pool.ntp.org: Unknown host
Jan 1 01:00:11 OpenWrt user.info sysinit: 1.openwrt.pool.ntp.org: Unknown host
Jan 1 01:00:11 OpenWrt user.info sysinit: 2.openwrt.pool.ntp.org: Unknown host
Jan 1 01:00:11 OpenWrt user.info sysinit: 3.openwrt.pool.ntp.org: Unknown host
Jan 1 01:00:12 OpenWrt user.info kernel: usbcore: registered new interface driver usbfs
Jan 1 01:00:12 OpenWrt user.info kernel: usbcore: registered new interface driver hub
Jan 1 01:00:12 OpenWrt user.info kernel: usbcore: registered new device driver usb
Jan 1 01:00:13 OpenWrt user.info kernel: cfg80211: World regulatory domain updated:
Jan 1 01:00:13 OpenWrt user.info kernel: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 01:00:13 OpenWrt user.info kernel: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 01:00:13 OpenWrt user.info kernel: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 1 01:00:13 OpenWrt user.info kernel: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 1 01:00:13 OpenWrt user.info kernel: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 01:00:13 OpenWrt user.info kernel: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 01:00:14 OpenWrt user.debug kernel: phy0: Selected rate control algorithm 'ath9k_rate_control'
Jan 1 01:00:14 OpenWrt user.info kernel: phy0: Atheros AR9100 MAC/BB Rev:0 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
Jan 1 01:00:15 OpenWrt user.info kernel: PPP generic driver version 2.4.2
Jan 1 01:00:16 OpenWrt user.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 01:00:16 OpenWrt user.info kernel: NET: Registered protocol family 24
Jan 1 01:00:16 OpenWrt user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 01:00:16 OpenWrt user.info kernel: ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
Jan 1 01:00:16 OpenWrt user.info kernel: ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
Jan 1 01:00:16 OpenWrt user.info kernel: ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
Jan 1 01:00:16 OpenWrt user.info kernel: ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
Jan 1 01:00:16 OpenWrt user.info kernel: usb usb1: configuration #1 chosen from 1 choice
Jan 1 01:00:16 OpenWrt user.info kernel: hub 1-0:1.0: USB hub found
Jan 1 01:00:16 OpenWrt user.info kernel: hub 1-0:1.0: 1 port detected
Jan 1 01:00:17 OpenWrt user.warn kernel: nf_conntrack version 0.5.0 (460 buckets, 1840 max)
Jan 1 01:00:17 OpenWrt user.warn kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Jan 1 01:00:17 OpenWrt user.warn kernel: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
Jan 1 01:00:17 OpenWrt user.warn kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Jan 1 01:00:17 OpenWrt user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_2.6.32.16_ehci_hcd Product=Atheros_AR91xx_built-in_EHCI_controller Serial=ar71xx-ehci
Jan 1 01:00:17 OpenWrt user.info kernel: usbcore: registered new interface driver usbserial
Jan 1 01:00:17 OpenWrt user.info kernel: USB Serial support registered for generic
Jan 1 01:00:17 OpenWrt user.info kernel: usbcore: registered new interface driver usbserial_generic
Jan 1 01:00:17 OpenWrt user.info kernel: usbserial: USB Serial Driver core
Jan 1 01:00:17 OpenWrt user.info kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:17 OpenWrt user.info kernel: usbcore: registered new interface driver usb-storage
Jan 1 01:00:17 OpenWrt user.info kernel: USB Mass Storage support registered.
Jan 1 01:00:18 OpenWrt user.info kernel: USB Serial support registered for GSM modem (1-port)
Jan 1 01:00:18 OpenWrt user.info kernel: usbcore: registered new interface driver option
Jan 1 01:00:18 OpenWrt user.info kernel: option: v0.7.2:USB Driver for GSM modems
Jan 1 01:00:18 OpenWrt user.info kernel: fuse init (API version 7.13)
Jan 1 01:00:18 OpenWrt user.info sysinit: WARNING: /lib/functions/fsck not found
Jan 1 01:00:18 OpenWrt user.info sysinit: 'radio0' is disabled
Jan 1 01:00:19 OpenWrt user.info sysinit: 'radio0' is disabled
Jan 1 01:00:19 OpenWrt user.info sysinit: Loading defaults
Jan 1 01:00:20 OpenWrt user.info sysinit: Loading synflood protection
Jan 1 01:00:20 OpenWrt user.info sysinit: Adding custom chains
Jan 1 01:00:21 OpenWrt user.info sysinit: Loading zones
Jan 1 01:00:21 OpenWrt user.info sysinit: Loading forwarding
Jan 1 01:00:21 OpenWrt user.info sysinit: Loading redirects
Jan 1 01:00:21 OpenWrt user.info sysinit: Loading rules
Jan 1 01:00:21 OpenWrt user.info sysinit: Loading includes
Jan 1 01:00:21 OpenWrt user.info sysinit: Loading zone defaults
Jan 1 01:00:22 OpenWrt user.notice root: adding lan (br-lan) to firewall zone lan
Jan 1 01:00:22 OpenWrt user.notice root: adding wan (eth0.2) to firewall zone wan
Jan 1 01:00:23 OpenWrt authpriv.info dropbear[1138]: Running in background
Jan 1 01:00:23 OpenWrt user.notice root: starting ntpclient
Oct 13 10:34:29 OpenWrt user.notice rdate: Synced with ptbtime1.ptb.de
Oct 13 10:34:29 OpenWrt user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Oct 13 10:34:29 OpenWrt user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Oct 13 10:34:33 OpenWrt daemon.info dnsmasq[1263]: started, version 2.55 cachesize 150
Oct 13 10:34:33 OpenWrt daemon.info dnsmasq[1263]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Oct 13 10:34:33 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCP, IP range 192.168.1.100 -- 192.168.1.250, lease time 12h
Oct 13 10:34:33 OpenWrt daemon.info dnsmasq[1263]: using local addresses only for domain lan
Oct 13 10:34:33 OpenWrt daemon.info dnsmasq[1263]: reading /tmp/resolv.conf.auto
Oct 13 10:34:33 OpenWrt daemon.info dnsmasq[1263]: using nameserver 192.0.2.1#53
Oct 13 10:34:33 OpenWrt daemon.info dnsmasq[1263]: using nameserver 192.0.2.2#53
Oct 13 10:34:33 OpenWrt daemon.info dnsmasq[1263]: using local addresses only for domain lan
Oct 13 10:34:33 OpenWrt daemon.info dnsmasq[1263]: read /etc/hosts - 1 addresses
Oct 13 10:34:33 OpenWrt daemon.info dnsmasq-dhcp[1263]: read /etc/ethers - 0 addresses
Oct 13 10:34:35 OpenWrt user.info sysinit: setting up led WLAN
Oct 13 10:34:35 OpenWrt user.debug kernel: ar71xx-wdt: enabling watchdog timer
Oct 13 10:35:35 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCPREQUEST(br-lan) 10.12.4.238 00:0f:86:f1:85:84
Oct 13 10:35:35 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCPNAK(br-lan) 10.12.4.238 00:0f:86:f1:85:84 wrong network
Oct 13 10:35:35 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCPREQUEST(br-lan) 10.12.4.238 00:0f:86:f1:85:84
Oct 13 10:35:35 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCPNAK(br-lan) 10.12.4.238 00:0f:86:f1:85:84 wrong network
Oct 13 10:35:35 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCPREQUEST(br-lan) 10.12.4.238 00:0f:86:f1:85:84
Oct 13 10:35:35 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCPNAK(br-lan) 10.12.4.238 00:0f:86:f1:85:84 wrong network
Oct 13 10:35:35 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCPREQUEST(br-lan) 10.12.4.238 00:0f:86:f1:85:84
Oct 13 10:35:35 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCPNAK(br-lan) 10.12.4.238 00:0f:86:f1:85:84 wrong network
Oct 13 10:35:42 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCPDISCOVER(br-lan) 00:0f:86:f1:85:84
Oct 13 10:35:42 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCPOFFER(br-lan) 192.168.1.157 00:0f:86:f1:85:84
Oct 13 10:35:42 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCPREQUEST(br-lan) 192.168.1.157 00:0f:86:f1:85:84
Oct 13 10:35:42 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCPACK(br-lan) 192.168.1.157 00:0f:86:f1:85:84 SipuraSPA
Oct 13 10:38:22 OpenWrt authpriv.info dropbear[1294]: Child connection from 192.168.1.101:2213
Oct 13 10:38:22 OpenWrt authpriv.notice dropbear[1294]: password auth succeeded for 'root' from 192.168.1.101:2213
Oct 13 10:40:44 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCPINFORM(br-lan) 192.168.1.101 00:1f:d0:99:5c:9a
Oct 13 10:40:44 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCPACK(br-lan) 192.168.1.101 00:1f:d0:99:5c:9a seba
Oct 13 10:44:31 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCPINFORM(br-lan) 192.168.1.101 00:1f:d0:99:5c:9a
Oct 13 10:44:31 OpenWrt daemon.info dnsmasq-dhcp[1263]: DHCPACK(br-lan) 192.168.1.101 00:1f:d0:99:5c:9a sebaa tu ps
root@OpenWrt:~# ps
PID USER VSZ STAT COMMAND
1 root 1364 S init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [events/0]
5 root 0 SW [khelper]
8 root 0 SW [async/mgr]
41 root 0 SW [sync_supers]
43 root 0 SW [bdi-default]
45 root 0 SW [kblockd/0]
70 root 0 SW [kswapd0]
71 root 0 SW [aio/0]
72 root 0 SW [crypto/0]
84 root 0 SW [mtdblockd]
90 root 0 SW [ar71xx-spi]
223 root 0 SW [ipolldevd]
277 root 0 SWN [jffs2_gcd_mtd3]
293 root 1364 S init
310 root 1368 S syslogd -C16
312 root 1352 S klogd
326 root 772 S /sbin/hotplug2 --override --persistent --set-worker /
480 root 0 SW [cfg80211]
590 root 0 SW [khubd]
650 root 0 SW [phy0]
1138 root 1136 S /usr/sbin/dropbear -p 22 -P /var/run/dropbear.1.pid
1147 root 1860 S /usr/sbin/uhttpd -f -h /www -r OpenWrt -x /cgi-bin -t
1154 root 824 S /usr/sbin/ntpclient -i 600 -s -l -D -p 123 -h 0.openw
1166 root 1044 S vsftpd
1173 root 1368 S udhcpc -t 0 -i eth0.2 -b -p /var/run/dhcp-eth0.2.pid
1263 nobody 904 S /usr/sbin/dnsmasq -K -D -y -Z -b -E -s lan -S /lan/ -
1272 root 2624 S N smbd -D
1274 root 2124 S nmbd -D
1291 root 1360 S watchdog -t 5 /dev/watchdog
1311 root 1192 S /usr/sbin/dropbear -p 22 -P /var/run/dropbear.1.pid
1312 root 1364 S -ash
1317 root 1356 R ps
root@OpenWrt:~# Pokaż jeszcze ps. I wieczorem będziecie mieli nową wersję.
Cezary.
Przy okazji jak robisz paczke, za Ci bardzo ja, ze swojej strony dziekuje, ale czy jest w OpenWRT obsluga UPNP?
Pytam, bo mam playera HD (Ferguson Ariva 110) na linuxie (chyba debianopodobny), ktorego firmware nie ma zainstalowanego radia internetowego (strumien), a moze sie laczyc po sieci poprzez UPNP.
Pozdrawiam.
Tak, i standardowo w obrazie jest upnp, tylko trzeba to włączyć, bo domyślnie jest wyłączony.
Witam Cezary,
Jeżeli dzisiaj pojawi się poprawiony obraz...
...jesteś Wielki.
pozdrawiam
@Cezary
Poki nie mam luci, jaka komenda sie wlacza upnp i w ktorym pliku to znajde?
Pozdrawiam.
EDIT.
W sensie czy to ma tak jakos wygladac (w sensie nazw pakietow):
cd /tmp
wget http://www.users.on.net/~ed.luck/libupnp_1.2.1a_mipsel.ipk
ipkg install libupnp_1.2.1a_mipsel.ipk
wget http://www.users.on.net/~ed.luck/linux-igd_1.0.1.ipk
ipkg install ./linux-igd_1.0.1.ipk
/etc/init.d/S65upnpd startEDIT2.
Cezary, czytalem, ze UPnP jest niezabezpieczony.
Czy jest mozliwosc otwarcia UPnP wylacznie na LAN?
Bo jak rozumiem DoS na ruterach ma to wylaczone domyslnie wlasnie ze wzgledow bezpieczenstwa.
Cezary licze na nowy obraz bez luci 
A nie, sorry, ja nie dokładam. Trzeba zainstalować pakiet luci-app-upnp i przez luci będzie można sobie to wyklikać. Domyślnie wan jest niedostępny, wiec nie ma obawy że ktoś się do upnp dostanie. Gorzej z wirusami ze strony lan .
@Juno: w openwrt nie ma ipkg, jest opkg. Robisz:
opkg update
opkg instal luci-app-upnp Ok. Dzieki za info.
To poczekam na paczke.
Pozdrawiam.
Hmm, nie musisz. To standardowy składnik repo, wiec po prostu to zainstaluj.
Poki nie dziala luci to nie bede tykal.
PS. możesz gargoyle srpawdzić, ma upnp w standardzie. Tyle że montowanie jest z automatu i z gui tego nie wyklikasz bo gargoyle jeszcze tego nie posiada.
I cant start luci too, only blank page, uhttpd running, nothing in logread.
Witam,
To jak Cezary, mem dzisiaj czekac cierpliwie na obraz czy mam jechac jeszcze na TPLinku ?
Z góry dzięki za zaangażowanie.
Pozdrawiam
Czekaj, robią się.
Nowe obrazy są wgrane. Upgrade wykonujecie przez sysupgrade, jak to opisane na stronie jest. I luci działa, co by nie było...
Cezary, mi udało się wczoraj wrócić do obrazu TPLinka oryginalnego, więc teraz nie mam opcji Ssysupgrade. Będzie obraz do załadowania ze strony oryginalnego softu ?
Czy może załadować najpierw tą niedziałającą wersję Factory i następnie poprawioną przez sysupgrade ?
Nie, ładujesz wersje factory po prostu przez www. Działającą...
I am using extroot, if I want to install new image, should I use normally sysupgrade?
Yes, in the same way.
I've just installed latest image and luci still not working, same as before (blank page, uhttpd running, logread clean)
Tested before I wrote. I works, really.
I believe you. If I try to run manually luci I get always this error:
/usr/bin/lua: error loading module 'luci.cacheloader' from file '/usr/lib/lua/luci/cacheloader.lua':
/usr/lib/lua/luci/cacheloader.lua: bad header in precompiled chunk
stack traceback:
[C]: ?
[C]: in function 'require'
./luci:2: in main chunk
[C]: ?
Strony Poprzednia 1 2 3 4 5 6 Następna
Zaloguj się lub zarejestruj by napisać odpowiedź
eko.one.pl → Oprogramowanie / Software → OpenWRT i LUCi
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc