Witam.
----------------------------------------------------------------
| Machine: TP-Link TL-WDR3600 v1                               |
| Uptime: 0d, 00:01:55                                         |
| Load: 1.16 0.40 0.14                                         |
| Flash: total: 26.2G, free: 24.4G, used: 2%                   |
| Memory: total: 126620K, free: 106988K, used: 15%

przy próbach inslalacji cups :
root@Gargoyle:~# opkg install cups
ERROR: Not enough space in destination root to install specified packages:
    libcupsmime, libstdcpp, cups, libpng, libcupsppdc, libcupscgi, libcups, libjpeg, libusb-1.0

mój mount:
root@Gargoyle:~# mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,noatime)
sysfs on /sys type sysfs (rw,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime,size=63312k)
tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,noatime,mode=600)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlayfs (rw,relatime,lowerdir=/,upperdir=/overlay)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
none on /proc/bus/usb type usbfs (rw,relatime)
nfsd on /proc/fs/nfsd type nfsd (rw,relatime)
/dev/sda1 on /overlay type ext4 (rw,noatime,user_xattr,barrier=1,data=ordered)

root@Gargoyle:~# mount  | grep /dev/sd
/dev/sda1 on /overlay type ext4 (rw,noatime,user_xattr,barrier=1,data=ordered)
root@Gargoyle:~# df -h  | grep /dev/sd
/dev/sda1                26.2G    525.5M     24.4G   2% /overlay

folder dla dodatków to dev/sda1
proszę o sugestie.
Pozdrawiam.