Nie zakładając nowego tematu. Walczę teraz z NUT'em. Źródła mam pobrane, w configu pakiet zaznaczony i podczas kompilacji otrzymuje:
#
# Copyright © 2006-2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=nut
PKG_VERSION:=2.6.5
PKG_RELEASE:=2
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=http://www.networkupstools.org/source/2.6/
PKG_MD5SUM:=e6eac4fa04baff0d0a827d64efe81a7e
PKG_BUILD_DEPENDS:=libusb libnetsnmp
PKG_FIXUP:=autoreconf
PKG_INSTALL:=1
PKG_BUILD_PARALLEL:=1
define Package/nut/Default
URL:=http://www.networkupstools.org/
TITLE:= Network UPS Tools
DEPENDS:=@USB_SUPPORT +libnetsnmp +libpthread
SECTION:=utils
CATEGORY:=Utilities
endef
define Package/nut/description
Network UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
endef
define Package/nut
$(call Package/nut/Default)
MENU:=1
# TITLE+= (common)
endef
define Package/nut-server
$(call Package/nut/Default)
TITLE+= (server)
DEPENDS+= nut
endef
define Package/nut-client
$(call Package/nut/Default)
TITLE+= (client)
DEPENDS+= nut
endef
define Package/nut-logger
$(call Package/nut/Default)
TITLE+= (logger)
DEPENDS+= nut
endef
define Package/nut-monitor
$(call Package/nut/Default)
TITLE+= (monitor)
DEPENDS+= nut
endef
define Package/nut/install
$(INSTALL_DIR) $(1)/usr/lib
$(INSTALL_DIR) $(1)/etc/nut
$(CP) $(PKG_INSTALL_DIR)/usr/lib/libupsclient.so* $(1)/usr/lib/
$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/nut.conf.sample $(1)/etc/nut/nut.conf
ln -sf /var/run/ups.conf $(1)/etc/nut/ups.conf
endef
define Build/InstallDev
$(INSTALL_DIR) $(1)/usr/include
$(CP) $(PKG_INSTALL_DIR)/usr/include/*.h $(1)/usr/include
$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/*.pc $(1)/usr/lib/pkgconfig
$(CP) $(PKG_INSTALL_DIR)/usr/lib/lib* $(1)/usr/lib
endef
define Package/nut/conffiles
/etc/nut/nut.conf
endef
define Package/nut-client/install
$(INSTALL_DIR) $(1)/usr/bin
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/upsc $(1)/usr/bin
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/upsrw $(1)/usr/bin
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/upscmd $(1)/usr/bin
endef
define Package/nut-server/install
$(INSTALL_DIR) $(1)/etc/nut
$(INSTALL_DIR) $(1)/usr/sbin
$(INSTALL_DIR) $(1)/lib/nut
$(INSTALL_DIR) $(1)/usr/share/nut
$(INSTALL_DIR) $(1)/etc/init.d
$(INSTALL_BIN) ./files/ups.init $(1)/etc/init.d/ups
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/upsd $(1)/usr/sbin
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/lib/nut/upsdrvctl $(1)/lib/nut
$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/upsd.conf.sample $(1)/etc/nut/upsd.conf
ln -sf /var/run/upsd.users $(1)/etc/nut/upsd.users
$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/share/nut/cmdvartab $(1)/usr/share/nut/cmdvartab
$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/share/nut/driver.list $(1)/usr/share/nut/driver.list
endef
define Package/nut-server/conffiles
/etc/nut/upsd.conf
endef
define Package/nut-logger/install
$(INSTALL_DIR) $(1)/usr/bin
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/upslog $(1)/usr/bin
endef
define Package/nut-monitor/install
$(INSTALL_DIR) $(1)/usr/sbin
$(INSTALL_DIR) $(1)/etc/nut
$(INSTALL_DIR) $(1)/etc/init.d
$(INSTALL_BIN) ./files/upsmon.init $(1)/etc/init.d/upsmon
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/upsmon $(1)/usr/sbin
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/upssched $(1)/usr/sbin
ln -sf /var/run/upsmon.conf $(1)/etc/nut/upsmon.conf
$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/upssched.conf.sample $(1)/etc/nut/upssched.conf
endef
define Package/nut-monitor/conffiles
/etc/nut/upssched.conf
endef
define DriverPackage
define Package/nut-driver-$(1)
$(call Package/nut/Default)
TITLE += ($(1) driver)
DEPENDS += nut nut-server
ifeq ($(1),$(filter $(1),$(USB_LIBUSB_DRIVERLIST)))
DEPENDS+=libusb
endif
ifeq ($(1),$(filter $(1),$(SNMP_DRIVERLIST)))
DEPENDS+=libnetsnmp
endif
endef
# Deliberately empty (well, some spaces) in order to trigger a build
# failure. It should be overridden by the list below, and when updating
# to a new version of nut we will need to provide descriptions for any
# new drivers.
define Package/nut-driver-$(1)/description
endef
define Package/nut-driver-$(1)/install
$(INSTALL_DIR) $$(1)/lib/nut/
$(INSTALL_BIN) $$(PKG_INSTALL_DIR)/lib/nut/$(1) $$(1)/lib/nut/
ifeq ($(1),clone)
# Bundle clone and clone-outlet together
$(INSTALL_BIN) $$(PKG_INSTALL_DIR)/lib/nut/$(1)-outlet $$(1)/lib/nut/
endif
endef
endef
# These lists are lifted *directly* from drivers/Makefile.am in the nut
# source tree. This it to make it simpler to keep in sync when updating
# to a newer version of nut. Do not edit this manually.
#
# DO NOT EDIT (except to update with a fresh cut/paste)!
SERIAL_DRIVERLIST = bcmxcp belkin belkinunv bestfcom \
bestfortress bestuferrups bestups dummy-ups etapro everups \
gamatronic genericups isbmex liebert liebert-esp2 masterguard metasys \
oldmge-shut mge-utalk microdowell mge-shut oneac optiups powercom rhino \
safenet skel solis tripplite tripplitesu upscode2 victronups powerpanel \
blazer_ser clone clone-outlet ivtscd apcsmart apcsmart-old
SNMP_DRIVERLIST = snmp-ups
USB_LIBUSB_DRIVERLIST = usbhid-ups bcmxcp_usb tripplite_usb \
blazer_usb richcomm_usb
# END: DO NOT EDIT!
NUT_DRIVERS := $(filter-out skel clone-outlet,$(SERIAL_DRIVERLIST)) \
$(USB_LIBUSB_DRIVERLIST) $(SNMP_DRIVERLIST)
$(foreach d,$(NUT_DRIVERS),$(eval $(call DriverPackage,$(d))))
define DriverDescription
define Package/nut-driver-$(1)/description
$(2)
endef
endef
$(eval $(call DriverDescription,apcsmart,\
Driver for American Power Conversion Smart Protocol UPS equipment))
$(eval $(call DriverDescription,apcsmart-old,\
Driver for American Power Conversion Smart Protocol UPS equipment))
$(eval $(call DriverDescription,bcmxcp,\
Driver for UPSes supporting the serial BCM/XCP protocol))
$(eval $(call DriverDescription,bcmxcp_usb,\
Experimental driver for UPSes supporting the BCM/XCP protocol over USB))
$(eval $(call DriverDescription,belkin,\
Driver for Belkin serial UPS equipment))
$(eval $(call DriverDescription,belkinunv,\
Driver for Belkin "Universal UPS" and compatible))
$(eval $(call DriverDescription,bestfcom,\
Driver for Best Power Fortress/Ferrups))
$(eval $(call DriverDescription,bestfortress,\
Driver for old Best Fortress UPS equipment))
$(eval $(call DriverDescription,bestuferrups,\
Driver for Best Power Micro-Ferrups))
$(eval $(call DriverDescription,bestups,\
Driver for Best Power / SOLA (Phoenixtec protocol) UPS equipment))
$(eval $(call DriverDescription,blazer_ser,\
Driver for Megatec/Q1 protocol serial))
$(eval $(call DriverDescription,blazer_usb,\
Driver for Megatec/Q1 protocol USB))
$(eval $(call DriverDescription,clone,\
UPS driver clone))
$(eval $(call DriverDescription,dummy-ups,\
Driver for multi-purpose UPS emulation))
$(eval $(call DriverDescription,etapro,\
Driver for ETA UPS equipment))
$(eval $(call DriverDescription,everups,\
Driver for Ever UPS models))
$(eval $(call DriverDescription,gamatronic,\
Driver for Gamatronic UPS equipment))
$(eval $(call DriverDescription,genericups,\
Driver for contact-closure UPS equipment))
$(eval $(call DriverDescription,isbmex,\
Driver for ISBMEX UPS equipment))
$(eval $(call DriverDescription,ivtscd,\
driver for the IVT Solar Controller Device))
$(eval $(call DriverDescription,liebert,\
Driver for Liebert contact-closure UPS equipment))
$(eval $(call DriverDescription,liebert-esp2,\
Driver for Liebert UPS using the ESP-II protocol))
$(eval $(call DriverDescription,masterguard,\
Driver for Masterguard UPS equipment))
$(eval $(call DriverDescription,metasys,\
Driver for Meta System UPS equipment))
$(eval $(call DriverDescription,mge-shut,\
Driver for SHUT Protocol UPS equipment))
$(eval $(call DriverDescription,mge-utalk,\
Driver for MGE UPS SYSTEMS UTalk protocol equipment))
$(eval $(call DriverDescription,microdowell,\
Driver for Microdowell Enterprise UPS series))
$(eval $(call DriverDescription,oldmge-shut,\
Driver for SHUT Protocol UPS equipment))
$(eval $(call DriverDescription,oneac,\
Driver for Oneac UPS equipment))
$(eval $(call DriverDescription,optiups,\
Driver for Opti-UPS (Viewsonice) UPS and Zinto D (ONLINE-USV) equipment))
$(eval $(call DriverDescription,powercom,\
UPS driver for Powercom/Trust/Advice UPS equipment))
$(eval $(call DriverDescription,powerpanel,\
Driver for PowerPanel Plus compatible UPS equipment))
$(eval $(call DriverDescription,rhino,\
Driver for Brazilian Microsol RHINO UPS equipment))
$(eval $(call DriverDescription,richcomm_usb,\
Driver UPS equipment using Richcomm dry-contact to USB solution))
$(eval $(call DriverDescription,safenet,\
Driver for SafeNet compatible UPS equipment))
$(eval $(call DriverDescription,solis,\
Driver for Brazilian Microsol SOLIS UPS equipment))
$(eval $(call DriverDescription,tripplite,\
Driver for Tripp-Lite SmartPro UPS equipment))
$(eval $(call DriverDescription,tripplitesu,\
Driver for Tripp-Lite SmartOnline (SU) UPS equipment))
$(eval $(call DriverDescription,tripplite_usb,\
Driver for older Tripp Lite USB UPSes (not PDC HID)))
$(eval $(call DriverDescription,upscode2,\
Driver for UPScode II compatible UPS equipment))
$(eval $(call DriverDescription,usbhid-ups,\
Driver for USB/HID UPS equipment))
$(eval $(call DriverDescription,victronups,\
Driver for IMV/Victron UPS unit Match, Match Lite, NetUps))
$(eval $(call DriverDescription,snmp-ups,\
Multi-MIB Driver for SNMP UPS equipment))
include $(INCLUDE_DIR)/package.mk
CONFIGURE_ARGS += \
--without-ssl \
--with-pidpath=/var/run \
--with-statepath=/var/run \
--with-altpidpath=/var/run \
--sysconfdir=/etc/nut \
--with-drvpath=/lib/nut \
--datadir=/usr/share/nut \
--with-user=root \
--with-group=root \
--with-usb \
--with-snmp \
--without-libltdl \
--with-dev
$(eval $(call BuildPackage,nut))
$(eval $(call BuildPackage,nut-client))
$(eval $(call BuildPackage,nut-server))
$(eval $(call BuildPackage,nut-monitor))
$(eval $(call BuildPackage,nut-logger))
$(foreach d,$(NUT_DRIVERS),$(eval $(call BuildPackage,nut-driver-$(d))))
Teraz mam coś takiego:
Moje configi: