26 Odpowiedź przez bbarwik

  • Zarejestrowany: 2013-08-22
  • Posty: 78

Odp: Problemy z Extrootem

System raz padł, prawdopodobnie niechcący ruszyłem pendrive podłączając modem.

Aug 31 20:56:47 OpenWrt kern.notice kernel: [ 1573.390000] sd 19:0:0:0: [sdc] 15564800 512-byte logical blocks: (7.96 GB/7.42 GiB)
Aug 31 20:56:47 OpenWrt kern.notice kernel: [ 1573.400000] sd 19:0:0:0: [sdc] Write Protect is off
Aug 31 20:56:47 OpenWrt kern.debug kernel: [ 1573.400000] sd 19:0:0:0: [sdc] Mode Sense: 0f 0e 00 00
Aug 31 20:56:47 OpenWrt kern.notice kernel: [ 1573.400000] sd 19:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 31 20:56:47 OpenWrt kern.info kernel: [ 1573.430000]  sdc: sdc1
Aug 31 20:56:47 OpenWrt kern.notice kernel: [ 1573.430000] sd 19:0:0:0: [sdc] Attached SCSI removable disk
Aug 31 20:56:48 OpenWrt kern.info kernel: [ 1573.550000]  sdb: sdb1 sdb2
Aug 31 20:56:48 OpenWrt kern.err kernel: [ 1573.560000] sd 15:0:0:0: [sdb] No Caching mode page present
Aug 31 20:56:48 OpenWrt kern.err kernel: [ 1573.560000] sd 15:0:0:0: [sdb] Assuming drive cache: write through
Aug 31 20:56:48 OpenWrt kern.notice kernel: [ 1573.570000] sd 15:0:0:0: [sdb] Attached SCSI removable disk
Aug 31 20:56:48 OpenWrt kern.crit kernel: [ 1573.920000] EXT4-fs error (device sda2): ext4_read_inode_bitmap:161: comm ash: Cannot read inode bitmap - block_group = 0                               , inode_bitmap = 962
Aug 31 20:56:48 OpenWrt kern.crit kernel: [ 1573.930000] EXT4-fs error (device sda2) in ext4_new_inode:941: IO failure
Aug 31 20:56:49 OpenWrt kern.crit kernel: [ 1574.500000] EXT4-fs error (device sda2): ext4_read_inode_bitmap:161: comm ash: Cannot read inode bitmap - block_group = 0                               , inode_bitmap = 962
Aug 31 20:56:49 OpenWrt kern.crit kernel: [ 1574.520000] EXT4-fs error (device sda2) in ext4_new_inode:941: IO failure
Aug 31 20:56:49 OpenWrt kern.crit kernel: [ 1575.120000] EXT4-fs error (device sda2): ext4_read_inode_bitmap:161: comm ash: Cannot read inode bitmap - block_group = 0                               , inode_bitmap = 962
Aug 31 20:56:49 OpenWrt kern.crit kernel: [ 1575.140000] EXT4-fs error (device sda2) in ext4_new_inode:941: IO failure
root@OpenWrt:/www/camera# logread
Aug 31 20:56:32 OpenWrt kern.err kernel: [ 1557.540000] Buffer I/O error on device sda2, logical block 0
Aug 31 20:56:32 OpenWrt kern.warn kernel: [ 1557.550000] lost page write due to I/O error on sda2
Aug 31 20:56:32 OpenWrt kern.crit kernel: [ 1557.550000] EXT4-fs error (device sda2): ext4_find_entry:935: inode #442764: comm wget: reading directory lblock 0
Aug 31 20:56:32 OpenWrt kern.info kernel: [ 1557.660000] sd 0:0:0:0: [sda] Unhandled error code
Aug 31 20:56:32 OpenWrt kern.info kernel: [ 1557.660000] sd 0:0:0:0: [sda]  Result: hostbyte=0x07 driverbyte=0x00
Aug 31 20:56:32 OpenWrt kern.info kernel: [ 1557.670000] sd 0:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 dc 08 08 00 00 08
Aug 31 20:56:32 OpenWrt kern.err kernel: [ 1557.670000] option: option_instat_callback: error -71
Aug 31 20:56:32 OpenWrt kern.warn kernel: [ 1557.680000]  00
Aug 31 20:56:32 OpenWrt kern.err kernel: [ 1557.680000] end_request: I/O error, dev sda, sector 14419976
Aug 31 20:56:32 OpenWrt kern.crit kernel: [ 1557.690000] EXT4-fs error (device sda2): ext4_read_inode_bitmap:161: comm wget: Cannot read inode bitmap - block_group = 54, inode_bitmap = 1769473
Aug 31 20:56:32 OpenWrt kern.crit kernel: [ 1557.700000] EXT4-fs error (device sda2) in ext4_new_inode:941: IO failure
Aug 31 20:56:32 OpenWrt kern.err kernel: [ 1557.710000] EXT4-fs (sda2): previous I/O error to superblock detected
Aug 31 20:56:32 OpenWrt kern.info kernel: [ 1557.820000] sd 0:0:0:0: [sda] Unhandled error code
Aug 31 20:56:32 OpenWrt kern.info kernel: [ 1557.820000] sd 0:0:0:0: [sda]  Result: hostbyte=0x07 driverbyte=0x00
Aug 31 20:56:32 OpenWrt kern.info kernel: [ 1557.830000] sd 0:0:0:0: [sda] CDB: cdb[0]=0x2a: 2a 00 00 04 08 00 00 00 08 00
Aug 31 20:56:32 OpenWrt kern.err kernel: [ 1557.830000] end_request: I/O error, dev sda, sector 264192
Aug 31 20:56:32 OpenWrt kern.err kernel: [ 1557.840000] Buffer I/O error on device sda2, logical block 0
Aug 31 20:56:32 OpenWrt kern.warn kernel: [ 1557.850000] lost page write due to I/O error on sda2
Aug 31 20:56:32 OpenWrt kern.err kernel: [ 1557.890000] option: option_instat_callback: error -71
Aug 31 20:56:32 OpenWrt kern.err kernel: [ 1558.090000] option: option_instat_callback: error -71
Aug 31 20:56:32 OpenWrt kern.err kernel: [ 1558.290000] option: option_instat_callback: error -71
Aug 31 20:56:33 OpenWrt kern.err kernel: [ 1558.490000] option: option_instat_callback: error -71
Aug 31 20:56:33 OpenWrt kern.err kernel: [ 1558.680000] option: option_instat_callback: error -71
Aug 31 20:56:33 OpenWrt kern.err kernel: [ 1558.880000] option: option_instat_callback: error -71
Aug 31 20:56:33 OpenWrt kern.err kernel: [ 1559.080000] option: option_instat_callback: error -71
Aug 31 20:56:33 OpenWrt kern.err kernel: [ 1559.280000] option: option_instat_callback: error -71
Aug 31 20:56:33 OpenWrt authpriv.info dropbear[3774]: Child connection from 192.168.3.207:55082
Aug 31 20:56:33 OpenWrt kern.err kernel: [ 1559.480000] option: option_instat_callback: error -71
Aug 31 20:56:34 OpenWrt kern.err kernel: [ 1559.670000] option: option_instat_callback: error -71
Aug 31 20:56:34 OpenWrt kern.err kernel: [ 1559.870000] option: option_instat_callback: error -71
Aug 31 20:56:34 OpenWrt kern.err kernel: [ 1560.070000] option: option_instat_callback: error -71
Aug 31 20:56:34 OpenWrt kern.err kernel: [ 1560.270000] option: option_instat_callback: error -71
Aug 31 20:56:34 OpenWrt kern.err kernel: [ 1560.470000] option: option_instat_callback: error -71
Aug 31 20:56:35 OpenWrt kern.err kernel: [ 1560.660000] option: option_instat_callback: error -71
Aug 31 20:56:35 OpenWrt kern.err kernel: [ 1560.860000] option: option_instat_callback: error -71
Aug 31 20:56:35 OpenWrt kern.err kernel: [ 1561.060000] option: option_instat_callback: error -71
Aug 31 20:56:35 OpenWrt kern.err kernel: [ 1561.260000] option: option_instat_callback: error -71
Aug 31 20:56:35 OpenWrt kern.err kernel: [ 1561.460000] option: option_instat_callback: error -71
Aug 31 20:56:36 OpenWrt kern.err kernel: [ 1561.650000] option: option_instat_callback: error -71
Aug 31 20:56:36 OpenWrt authpriv.notice dropbear[3774]: Password auth succeeded for 'root' from 192.168.3.207:55082
Aug 31 20:56:36 OpenWrt kern.err kernel: [ 1561.850000] option: option_instat_callback: error -71
Aug 31 20:56:36 OpenWrt authpriv.info dropbear[3774]: Exit (root): Exited normally
Aug 31 20:56:36 OpenWrt kern.err kernel: [ 1562.050000] option: option_instat_callback: error -71
Aug 31 20:56:36 OpenWrt kern.err kernel: [ 1562.250000] option: option_instat_callback: error -71
Aug 31 20:56:36 OpenWrt kern.err kernel: [ 1562.450000] option: option_instat_callback: error -71
Aug 31 20:56:37 OpenWrt kern.err kernel: [ 1562.640000] option: option_instat_callback: error -71
Aug 31 20:56:37 OpenWrt kern.err kernel: [ 1562.840000] option: option_instat_callback: error -71
Aug 31 20:56:37 OpenWrt kern.err kernel: [ 1563.040000] option: option_instat_callback: error -71
Aug 31 20:56:37 OpenWrt kern.err kernel: [ 1563.240000] option: option_instat_callback: error -71
Aug 31 20:56:37 OpenWrt kern.err kernel: [ 1563.440000] option: option_instat_callback: error -71
Aug 31 20:56:38 OpenWrt kern.err kernel: [ 1563.630000] option: option_instat_callback: error -71
Aug 31 20:56:38 OpenWrt kern.err kernel: [ 1563.830000] option: option_instat_callback: error -71
Aug 31 20:56:38 OpenWrt kern.err kernel: [ 1564.030000] option: option_instat_callback: error -71
Aug 31 20:56:38 OpenWrt kern.err kernel: [ 1564.230000] option: option_instat_callback: error -71
Aug 31 20:56:38 OpenWrt kern.err kernel: [ 1564.430000] option: option_instat_callback: error -71
Aug 31 20:56:39 OpenWrt kern.err kernel: [ 1564.620000] option: option_instat_callback: error -71
Aug 31 20:56:39 OpenWrt kern.err kernel: [ 1564.820000] option: option_instat_callback: error -71
Aug 31 20:56:39 OpenWrt kern.err kernel: [ 1565.020000] option: option_instat_callback: error -71
Aug 31 20:56:39 OpenWrt kern.err kernel: [ 1565.220000] option: option_instat_callback: error -71
Aug 31 20:56:39 OpenWrt kern.err kernel: [ 1565.420000] option: option_instat_callback: error -71
Aug 31 20:56:40 OpenWrt kern.err kernel: [ 1565.610000] option: option_instat_callback: error -71
Aug 31 20:56:40 OpenWrt kern.err kernel: [ 1565.810000] option: option_instat_callback: error -71
Aug 31 20:56:40 OpenWrt kern.err kernel: [ 1566.010000] option: option_instat_callback: error -71
Aug 31 20:56:40 OpenWrt kern.err kernel: [ 1566.210000] option: option_instat_callback: error -71
Aug 31 20:56:40 OpenWrt kern.err kernel: [ 1566.410000] option: option_instat_callback: error -71
Aug 31 20:56:41 OpenWrt kern.err kernel: [ 1566.600000] option: option_instat_callback: error -71
Aug 31 20:56:41 OpenWrt kern.err kernel: [ 1566.800000] option: option_instat_callback: error -71
Aug 31 20:56:41 OpenWrt kern.err kernel: [ 1567.000000] option: option_instat_callback: error -71
Aug 31 20:56:41 OpenWrt kern.err kernel: [ 1567.200000] option: option_instat_callback: error -71
Aug 31 20:56:41 OpenWrt kern.err kernel: [ 1567.400000] option: option_instat_callback: error -71
Aug 31 20:56:42 OpenWrt kern.err kernel: [ 1567.590000] option: option_instat_callback: error -71
Aug 31 20:56:42 OpenWrt kern.err kernel: [ 1567.790000] option: option_instat_callback: error -71
Aug 31 20:56:42 OpenWrt kern.err kernel: [ 1567.990000] option: option_instat_callback: error -71
Aug 31 20:56:42 OpenWrt kern.err kernel: [ 1568.190000] option: option_instat_callback: error -71
Aug 31 20:56:42 OpenWrt kern.err kernel: [ 1568.390000] option: option_instat_callback: error -71
Aug 31 20:56:43 OpenWrt kern.err kernel: [ 1568.580000] option: option_instat_callback: error -71
Aug 31 20:56:43 OpenWrt kern.err kernel: [ 1568.780000] option: option_instat_callback: error -71
Aug 31 20:56:43 OpenWrt kern.err kernel: [ 1568.980000] option: option_instat_callback: error -71
Aug 31 20:56:43 OpenWrt kern.err kernel: [ 1569.180000] option: option_instat_callback: error -71
Aug 31 20:56:43 OpenWrt kern.err kernel: [ 1569.380000] option: option_instat_callback: error -71
Aug 31 20:56:44 OpenWrt kern.err kernel: [ 1569.570000] option: option_instat_callback: error -71
Aug 31 20:56:44 OpenWrt kern.err kernel: [ 1569.770000] option: option_instat_callback: error -71
Aug 31 20:56:44 OpenWrt kern.err kernel: [ 1569.970000] option: option_instat_callback: error -71
Aug 31 20:56:44 OpenWrt kern.err kernel: [ 1570.170000] option: option_instat_callback: error -71
Aug 31 20:56:44 OpenWrt kern.err kernel: [ 1570.370000] option: option_instat_callback: error -71
Aug 31 20:56:45 OpenWrt kern.err kernel: [ 1570.560000] option: option_instat_callback: error -71
Aug 31 20:56:45 OpenWrt kern.err kernel: [ 1570.760000] option: option_instat_callback: error -71
Aug 31 20:56:45 OpenWrt kern.err kernel: [ 1570.960000] option: option_instat_callback: error -71
Aug 31 20:56:45 OpenWrt kern.info kernel: [ 1571.140000] usb 1-1.1: USB disconnect, device number 3
Aug 31 20:56:45 OpenWrt kern.err kernel: [ 1571.160000] option: option_instat_callback: error -71
Aug 31 20:56:45 OpenWrt kern.emerg kernel: [ 1571.180000] journal commit I/O error
Aug 31 20:56:45 OpenWrt kern.emerg kernel: [ 1571.180000] journal commit I/O error
Aug 31 20:56:45 OpenWrt kern.emerg kernel: [ 1571.180000] journal commit I/O error
Aug 31 20:56:45 OpenWrt kern.emerg kernel: [ 1571.190000] journal commit I/O error
Aug 31 20:56:45 OpenWrt kern.emerg kernel: [ 1571.190000] journal commit I/O error
Aug 31 20:56:45 OpenWrt kern.emerg kernel: [ 1571.190000] journal commit I/O error
Aug 31 20:56:45 OpenWrt kern.emerg kernel: [ 1571.200000] journal commit I/O error
Aug 31 20:56:45 OpenWrt kern.emerg kernel: [ 1571.200000] journal commit I/O error
Aug 31 20:56:45 OpenWrt kern.emerg kernel: [ 1571.210000] journal commit I/O error
Aug 31 20:56:45 OpenWrt kern.emerg kernel: [ 1571.210000] journal commit I/O error
Aug 31 20:56:45 OpenWrt kern.emerg kernel: [ 1571.210000] journal commit I/O error
Aug 31 20:56:45 OpenWrt kern.info kernel: [ 1571.230000] usb 1-1.2: USB disconnect, device number 8
Aug 31 20:56:45 OpenWrt kern.err kernel: [ 1571.240000] option: option_instat_callback: error -143
Aug 31 20:56:45 OpenWrt kern.info kernel: [ 1571.250000] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
Aug 31 20:56:45 OpenWrt kern.info kernel: [ 1571.260000] option 1-1.2:1.0: device disconnected
Aug 31 20:56:45 OpenWrt kern.info kernel: [ 1571.260000] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
Aug 31 20:56:45 OpenWrt kern.info kernel: [ 1571.270000] option 1-1.2:1.1: device disconnected
Aug 31 20:56:45 OpenWrt kern.crit kernel: [ 1571.300000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #252: comm ls: reading directory lblock 0
Aug 31 20:56:45 OpenWrt kern.info kernel: [ 1571.410000] usb 1-1: reset high-speed USB device number 2 using ehci-platform
Aug 31 20:56:46 OpenWrt kern.crit kernel: [ 1571.820000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #879: comm ls: reading directory lblock 0
Aug 31 20:56:46 OpenWrt kern.info kernel: [ 1571.860000] usb 1-1.1: new high-speed USB device number 9 using ehci-platform
Aug 31 20:56:46 OpenWrt kern.info kernel: [ 1572.080000] scsi15 : usb-storage 1-1.1:1.0
Aug 31 20:56:46 OpenWrt kern.info kernel: [ 1572.170000] usb 1-1.2: new high-speed USB device number 10 using ehci-platform
Aug 31 20:56:46 OpenWrt kern.crit kernel: [ 1572.250000] EXT4-fs error (device sda2): ext4_find_entry:935: inode #2: comm exe: reading directory lblock 0
Aug 31 20:56:46 OpenWrt kern.crit kernel: [ 1572.260000] EXT4-fs error (device sda2): ext4_read_inode_bitmap:161: comm mkdir: Cannot read inode bitmap - block_group = 55, inode_bitmap = 1802241
Aug 31 20:56:46 OpenWrt kern.crit kernel: [ 1572.280000] EXT4-fs error (device sda2) in ext4_new_inode:941: IO failure
Aug 31 20:56:46 OpenWrt kern.info kernel: [ 1572.300000] option 1-1.2:1.0: GSM modem (1-port) converter detected
Aug 31 20:56:46 OpenWrt kern.info kernel: [ 1572.310000] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0
Aug 31 20:56:46 OpenWrt kern.info kernel: [ 1572.320000] option 1-1.2:1.1: GSM modem (1-port) converter detected
Aug 31 20:56:46 OpenWrt kern.info kernel: [ 1572.330000] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1
Aug 31 20:56:46 OpenWrt kern.crit kernel: [ 1572.340000] EXT4-fs error (device sda2): ext4_find_entry:935: inode #2: comm ash: reading directory lblock 0
Aug 31 20:56:46 OpenWrt kern.crit kernel: [ 1572.350000] EXT4-fs error (device sda2): ext4_read_inode_bitmap:161: comm ash: Cannot read inode bitmap - block_group = 0, inode_bitmap = 962
Aug 31 20:56:46 OpenWrt kern.crit kernel: [ 1572.360000] EXT4-fs error (device sda2) in ext4_new_inode:941: IO failure
Aug 31 20:56:46 OpenWrt kern.info kernel: [ 1572.370000] scsi18 : usb-storage 1-1.2:1.2
Aug 31 20:56:46 OpenWrt kern.info kernel: [ 1572.370000] scsi19 : usb-storage 1-1.2:1.3
Aug 31 20:56:47 OpenWrt kern.notice kernel: [ 1573.090000] scsi 15:0:0:0: Direct-Access     Generic  Flash Disk       8.00 PQ: 0 ANSI: 2
Aug 31 20:56:47 OpenWrt kern.notice kernel: [ 1573.100000] sd 15:0:0:0: [sdb] 65536000 512-byte logical blocks: (33.5 GB/31.2 GiB)
Aug 31 20:56:47 OpenWrt kern.notice kernel: [ 1573.120000] sd 15:0:0:0: [sdb] Write Protect is off
Aug 31 20:56:47 OpenWrt kern.debug kernel: [ 1573.120000] sd 15:0:0:0: [sdb] Mode Sense: 03 00 00 00
Aug 31 20:56:47 OpenWrt kern.err kernel: [ 1573.120000] sd 15:0:0:0: [sdb] No Caching mode page present
Aug 31 20:56:47 OpenWrt kern.err kernel: [ 1573.130000] sd 15:0:0:0: [sdb] Assuming drive cache: write through
Aug 31 20:56:47 OpenWrt kern.err kernel: [ 1573.150000] sd 15:0:0:0: [sdb] No Caching mode page present
Aug 31 20:56:47 OpenWrt kern.err kernel: [ 1573.160000] sd 15:0:0:0: [sdb] Assuming drive cache: write through
Aug 31 20:56:47 OpenWrt kern.notice kernel: [ 1573.370000] scsi 18:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Aug 31 20:56:47 OpenWrt kern.notice kernel: [ 1573.380000] scsi 19:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
Aug 31 20:56:47 OpenWrt kern.notice kernel: [ 1573.390000] sd 19:0:0:0: [sdc] 15564800 512-byte logical blocks: (7.96 GB/7.42 GiB)
Aug 31 20:56:47 OpenWrt kern.notice kernel: [ 1573.400000] sd 19:0:0:0: [sdc] Write Protect is off
Aug 31 20:56:47 OpenWrt kern.debug kernel: [ 1573.400000] sd 19:0:0:0: [sdc] Mode Sense: 0f 0e 00 00
Aug 31 20:56:47 OpenWrt kern.notice kernel: [ 1573.400000] sd 19:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 31 20:56:47 OpenWrt kern.info kernel: [ 1573.430000]  sdc: sdc1
Aug 31 20:56:47 OpenWrt kern.notice kernel: [ 1573.430000] sd 19:0:0:0: [sdc] Attached SCSI removable disk
Aug 31 20:56:48 OpenWrt kern.info kernel: [ 1573.550000]  sdb: sdb1 sdb2
Aug 31 20:56:48 OpenWrt kern.err kernel: [ 1573.560000] sd 15:0:0:0: [sdb] No Caching mode page present
Aug 31 20:56:48 OpenWrt kern.err kernel: [ 1573.560000] sd 15:0:0:0: [sdb] Assuming drive cache: write through
Aug 31 20:56:48 OpenWrt kern.notice kernel: [ 1573.570000] sd 15:0:0:0: [sdb] Attached SCSI removable disk
Aug 31 20:56:48 OpenWrt kern.crit kernel: [ 1573.920000] EXT4-fs error (device sda2): ext4_read_inode_bitmap:161: comm ash: Cannot read inode bitmap - block_group = 0, inode_bitmap = 962
Aug 31 20:56:48 OpenWrt kern.crit kernel: [ 1573.930000] EXT4-fs error (device sda2) in ext4_new_inode:941: IO failure
Aug 31 20:56:49 OpenWrt kern.crit kernel: [ 1574.500000] EXT4-fs error (device sda2): ext4_read_inode_bitmap:161: comm ash: Cannot read inode bitmap - block_group = 0, inode_bitmap = 962
Aug 31 20:56:49 OpenWrt kern.crit kernel: [ 1574.520000] EXT4-fs error (device sda2) in ext4_new_inode:941: IO failure
Aug 31 20:56:49 OpenWrt kern.crit kernel: [ 1575.120000] EXT4-fs error (device sda2): ext4_read_inode_bitmap:161: comm ash: Cannot read inode bitmap - block_group = 0, inode_bitmap = 962
Aug 31 20:56:49 OpenWrt kern.crit kernel: [ 1575.140000] EXT4-fs error (device sda2) in ext4_new_inode:941: IO failure

Po reboocie na szczęście wrócił do życia.

http://bbarwik.com/meteo/ - stacja meteo na OpenWrt
MR3420v2 + 2xWDR3600 + Foxconn NT-435 + Foxconn NT-535.
Niestety teraz wynajmuję mieszkanie więc tymczasowo plany rozbudowy wstrzymane sad

27 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,052

Odp: Problemy z Extrootem

Ja mam 750GB na extroota (taki dysk mam w kieszeni), więc ta teoria lekko chwieje się.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

28 Odpowiedź przez bbarwik (edytowany przez bbarwik 2013-09-01 11:39:56)

  • Zarejestrowany: 2013-08-22
  • Posty: 78

Odp: Problemy z Extrootem

Niemal 20h - system na 128 mb działa bez zarzutów.
Ten z 16 gb padł po kilku godzinach.

Sep  1 12:26:31 OpenWrt kern.crit kernel: [53655.130000] EXT4-fs error (device sda2): add_dirent_to_buf:1270: inode #704513: block 2818048: comm mkdir: bad entry in directory: rec_len % 4 != 0 - offset=0(0), inode=4294967295, rec_len=65535, name_len=255
Sep  1 12:26:46 OpenWrt kern.crit kernel: [53670.120000] EXT4-fs error (device sda2): add_dirent_to_buf:1270: inode #704513: block 2818048: comm mkdir: bad entry in directory: rec_len % 4 != 0 - offset=0(0), inode=4294967295, rec_len=65535, name_len=255

Podtrzymuje wersje że z wielkością partycji jest problem. Nawet jak pendrive się rozłączył nic systemowi już się nie dzieje, a przedtem padał nawet bez rozłączenia się pendrive.

Disk /dev/sda: 33.6 GB, 33554432000 bytes
64 heads, 32 sectors/track, 32000 cylinders, total 65536000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x9d380339

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1            2048      264191      131072   83  Linux
/dev/sda2          264192    31721471    15728640   83  Linux

Co prawda, myślę że to bardziej może być wina pendrive, bo to jakiś noname i zamiast 32 gb co ciekawe ma 33.6 gb.
Chciałem podstawić na Kingstonie, też 32 gb ale co ciekawe po podpięciu go do routera zawiesza się openwrt (na pc działa bez problemów).

Jednak nadal przydałaby mi się partycja do trzymania plików.
Nie można by czasem zrobić innego systemu plików z poziomu openwrt (windows widzi jedną partycje) żeby bezpiecznie można było te pliki przechowywać?

@Edit
Moje 16 gb stoi właśnie na ntfs-3g, zobaczę jak długo pożyje

http://bbarwik.com/meteo/ - stacja meteo na OpenWrt
MR3420v2 + 2xWDR3600 + Foxconn NT-435 + Foxconn NT-535.
Niestety teraz wynajmuję mieszkanie więc tymczasowo plany rozbudowy wstrzymane sad

29 Odpowiedź przez KMY (edytowany przez KMY 2013-09-01 11:45:56)

  • KMY
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-03-08
  • Posty: 483

Odp: Problemy z Extrootem

bbarwik napisał/a:

Nie można by czasem zrobić innego systemu plików z poziomu openwrt

tu masz opis:

http://openrouter.info/index.php?option … amp;id=249

możesz przebierać jak w ulęgałkach

aczkolwiek ja mam:
pen 1GB na swap
pen 2GB na ext4 do extroota
HDD500GB na ext4 do wymiany plików (FTP, SAMBA i DLNA)
i nic się z dyskiem nie dzieje, a mieszkam w takiej okolicy, że krótkotrwałe zaniki napięcia występują nie raz i kilka razy dziennie, system się podnosi po zaniku i jest OK

acha, ext4 bez kroniki

30 Odpowiedź przez bbarwik (edytowany przez bbarwik 2013-09-01 14:33:22)

  • Zarejestrowany: 2013-08-22
  • Posty: 78

Odp: Problemy z Extrootem

Ja akurat mam wrażenie że to wina pendrive, pliki stały póki co na ext2. System stoi na ext4 (mkfs.ext4 -O ^has_journal -m 0 /dev/sda1).

Chciałem spróbować inny pendrive 32 gb (kingston), tylko jak pisze gdy go podepnę zawiesza się system.

Póki co pliki postawiłem na ntfs-3g, ciekawe ile będzie działać.

Mój mały monitoring:
http://inwob.eu/images/2013/09/01/ua34G.png
Działa nawet bez potrzeby odświeżania strony.

3h późneij, ntfs padło.

Sep  1 15:28:01 OpenWrt daemon.notice ntfs-3g[4621]: ntfs_mst_post_read_fixup: magic: 0x00000000  size: 4096  usa_ofs: 0  usa_count: 65535: Invalid argument
Sep  1 15:28:01 OpenWrt daemon.notice ntfs-3g[4621]: Index buffer (VCN 0x0) of directory inode 0x27d has a size (24) differing from the directory specified size (4096).
Sep  1 15:28:01 OpenWrt daemon.notice ntfs-3g[4621]: ntfs_mst_post_read_fixup: magic: 0x00000000  size: 4096  usa_ofs: 0  usa_count: 65535: Invalid argument
Sep  1 15:28:01 OpenWrt daemon.notice ntfs-3g[4621]: Corrupt index block signature: vcn 0 inode 637
Sep  1 15:28:01 OpenWrt daemon.notice ntfs-3g[4621]: Failed to find place for new entry: Input/output error
Sep  1 15:28:01 OpenWrt daemon.notice ntfs-3g[4621]: Failed to add entry to the index: Input/output error

Pora na testy exfat.

http://bbarwik.com/meteo/ - stacja meteo na OpenWrt
MR3420v2 + 2xWDR3600 + Foxconn NT-435 + Foxconn NT-535.
Niestety teraz wynajmuję mieszkanie więc tymczasowo plany rozbudowy wstrzymane sad

31 Odpowiedź przez bbarwik (edytowany przez bbarwik 2013-09-02 06:30:42)

  • Zarejestrowany: 2013-08-22
  • Posty: 78

Odp: Problemy z Extrootem

Po kilkunastu godzinach, mam nowe ciekawe fakty.

Partycje 16 gb po tym jak padła zmniejszyłem do 4 gb i postawiłem ext4. Nowy system plików podziałał jakieś 2 godziny po czym oczywiście padł.
Spróbowałem wtedy inaczej - utworzyłem jeszcze jedną partycje.

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1            2048      264191      131072   83  Linux
/dev/sda2          264192     8652799     4194304   83  Linux
/dev/sda3         8652800    65535999    28441600   83  Linux

Na wszystkich jest ext4, sda1 działa już od soboty bez problemy, jest na niej system.
Podmontowałem sda2 i sda3, na obie partycje dałem żeby zapisywały się jakieś pliki i czekałem na rezultaty.
sda3 padła szybko, podziałała może z 1h, za to sda2 działa już niemal 16h co jest póki co rekordem żywotności takiej dużej partycji u mnie. Nie ma żadnych problemów z rozłączaniem się pendrive.
Później jeszcze podzielę sda3 na dwie części i zobaczę ile będzie działać.
To co pisze może wydać się dziwne, ale co ciekawe jest to prawdziwe.

http://bbarwik.com/meteo/ - stacja meteo na OpenWrt
MR3420v2 + 2xWDR3600 + Foxconn NT-435 + Foxconn NT-535.
Niestety teraz wynajmuję mieszkanie więc tymczasowo plany rozbudowy wstrzymane sad