726 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Nie ma tych logów. Masz dzuirę na 40s.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

727 Odpowiedź przez rybirek (edytowany przez rybirek 2013-06-03 15:33:05)

  • Zarejestrowany: 2010-02-04
  • Posty: 204

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

zyznos321 napisał/a:

Nie da się nic wyczytać z tych logów? wink

Ja wczoraj postanowiłem zrobić upgrade z jakiejś wcześniejszej wersji i miałem dokładnie takie same efekty, (MR3420v1 i przełączony Huawei 156G). Walczyłem chyba 2 godziny, a że nie miałem konsoli to na ślepo.
U mnie pomogło przywrócenie usb_modeswitch i ściągnięcie skryptu 49_usb_modeswitch Cezarego.
Nie wiem dlaczego to zadziałało.

728 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

I dlatego stosuje się uuid a nie nazwy nośników.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

729 Odpowiedź przez rybirek (edytowany przez rybirek 2013-06-03 18:08:08)

  • Zarejestrowany: 2010-02-04
  • Posty: 204

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

zyznos321 napisał/a:
rybirek napisał/a:
zyznos321 napisał/a:

Nie da się nic wyczytać z tych logów? wink

Ja wczoraj postanowiłem zrobić upgrade z jakiejś wcześniejszej wersji i miałem dokładnie takie same efekty, (MR3420v1 i przełączony Huawei 156G). Walczyłem chyba 2 godziny, a że nie miałem konsoli to na ślepo.
U mnie pomogło przywrócenie usb_modeswitch i ściągnięcie skryptu 49_usb_modeswitch Cezarego.
Nie wiem dlaczego to zadziałało.


Co w przypadku jesli masz podlączonego np. pendriva i modem z kartą? exroot nadal działa?
U mnie po podłączeniu pendrive, karta jest wykrywana jako sdb, a nie sda...

Nie wiem, mam tylko sam modem z kartą. Jestem na "urlopie" i nie mam tu nawet huba i nie przetestuje. Na pewno nie jestem jedynym który ma problemy po migracji do 1.5.10.0.
Jak w fstab miałem sda1 to po prostu montował do /overlay, ale pozostawało także zamontowane mtdblock3.
Jak zmieniałem na uuid to mountował do /tmp/overlay-disabled i na nic zdawało się kasowanie md5sum.
Pomogło dopiero to co napisałem wyżej.
Może się mylę, ale dziurę w logach to masz chyba dlatego, że ustawiłeś extroot_settle_time ...

730 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Więc nie miałeś extroota. Bo to objaw tego że właśnie extroot nie został zrobiony tylko zamontowany dysk.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

731 Odpowiedź przez rybirek

  • Zarejestrowany: 2010-02-04
  • Posty: 204

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Cezary napisał/a:

Więc nie miałeś extroota. Bo to objaw tego że właśnie extroot nie został zrobiony tylko zamontowany dysk.

To się chętnie dowiem co robiłem źle.

config mount
        option target '/overlay'
        option fstype 'ext4'
        option options 'rw,noatime'
        option enabled_fsck '0'
        option enabled '1'
        option uuid 'fcac7597-5cfc-4688-bc14-be04153e1aad'

Montowało do /tmp/overlay-disabled
Żeby być pewnym, to

rm -r /tmp/overlay-disabled/*
tar -C /overlay -cvf - . | tar -C /tmp/overlay-disabled -xf -
/etc/init.d/fstab overlay_enable
reboot

No i dalej bez efektu.
Pomogło jak pisałem przywrócenie usb_modeswitch i wgranie twojego skryptu.
Nie wiem jaki to ma wpływ, bo nawet nie zmieniłem V/P i zaskoczyło.
W tej chwili nie bardzo mogę dalej testować, bo nie mam kabelków, jutro wyjeżdżam i nie chcę czegoś skopać, bo to musi chodzić następny rok ;-)

732 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Jak masz overlay-disabled to po prostu albo masz sumę kontrolną na nim albo nie zainicjalizowało nośnika odpowiednio wcześnie.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

733 Odpowiedź przez karol04

  • Zarejestrowany: 2013-05-12
  • Posty: 31

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Witam

Dorzuce swoje 5 groszy do tematu:

Na poczatek pare slow o konfiguracji

tp-link mr3420 v2 + 1.5.9.11 (r36557), by obsy -> hub modecom -> huawei u173-u2 +uSD 8GB [AT^U2DIAG=256] z exroot i swap'em

Wszystko pieknie dzialalo, do momentu kiedy przez przypadek zamiast wylaczyc router wcisnalem przycisk wps/resest. Router sie zresetowal (zakladam ze odpalilem firstboot smile ) i odpalil z flash'a.

Wrzucilem do /etc/fstab/config odpowiednie "formulki", skasowalem wszystkie *extroot.md5* i .. nic dalej startuje z flash'a. Pałowalem sie tak dobra godzine i nic, dalej niechcial odpalic extroot'a montujac go do tmp/overlay-disable.

Przerzucilem system (extroot) z huawei u173-u2 +uSD 8GB na Pendrive'a wrzucilem do /etc/config/fstab co trzeba. z pendrive'a wszystko pieknie startuje. Wiec znowu do /etc/config/fstab wrzucilem uuid uSD 8GB i co dziwne, dalej startuje z pendrive'a a nie z huawei u173-u2 +uSD 8GB mimo, ze z z fstab'u i /config/fstab wynika ze powiniem startowac z uSD 8GB

Dla ustalenia uwagi:
/dev/sdb2: UUID="170da887-92d0-42b0-9205-a3fd021869b5" TYPE="swap"
/dev/sdb1: UUID="0c211d73-1eca-4520-b596-9c630cc4bf03" TYPE="ext3"
/dev/sda2: UUID="8f32387a-dbf0-46a4-92b4-49f8de1620a1" TYPE="swap"
/dev/sda1: UUID="b7248e21-d71a-41a9-b9f6-acc384dc8673" TYPE="ext3"


oraz /etc/config/fstab:

  GNU nano 2.2.6                                                       File: /etc/config/fstab                                                                                                                      


config global 'automount'
        option from_fstab '1'
        option anon_mount '1'

config global 'autoswap'
        option from_fstab '1'
        option anon_swap '0'

config mount
        option target '/overlay'
        option device '/dev/sda98'
        option options 'rw,noatime'
        option enabled_fsck '0'
        option enabled '1'
        option uuid 'b7248e21-d71a-41a9-b9f6-acc384dc8673'
        option fstype 'ext3'

config swap
        option device '/dev/sda2'
        option uuid '8f32387a-dbf0-46a4-92b4-49f8de1620a1'
        option enabled '1'

/etc/fstab:

/dev/sda1       /overlay        ext3    rw,noatime      0       0
/dev/sda2       none    swap    sw      0       0

oraz mount:

rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,noatime)
sysfs on /sys type sysfs (rw,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,noatime,mode=600)
/dev/sdb1 on /overlay type ext3 (rw,noatime,user_xattr,barrier=1,nodelalloc,data=ordered)
overlayfs:/overlay on / type overlayfs (rw,relatime,lowerdir=/,upperdir=/overlay)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
/dev/sda1 on /tmp/overlay-disabled type ext3 (rw,noatime,user_xattr,barrier=1,nodelalloc,data=ordered)
none on /proc/bus/usb type usbfs (rw,relatime)

oczywiscie za kazdym razem kasuje sumy kontrolne. moje pytanie jest nastepujace. dlaczego system startuje z pendrive'a a nie z flash'a ? gdzies sa jeszcze jakies pliki konfiguracyjne, ktore mowia systemowi, ze ma startowac z pen'a a nie z flash'a ?

mam nadzieje, ze nie zamieszalem z bardzo. meritum sprawy wyglada tak

dzialal extroot na uSD8GB, po resecie przestal. przerzucenie systemu z uSD8GB na pendrive sprawilo, ze startuje z pendrive'a. proba odpalenia extroot'a z uSD8GB konczy sie odpaleniem go z pendrive'a ?? a nie jak zdrowy rozsadek by podpowiadal z flash'a (skoro z jakis powodow niechce odpalic go z uSD8GB)

dodam, ze partycje swap montuje, z karty uSD wpietej do modemu

Pozdrawiam

734 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Teraz to masz dwa nośniki które jako /overlay próbujesz zrobić. Weź blkid, znajdź uuid tego który ma być i wstaw w fstab we flashu.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

735 Odpowiedź przez karol04

  • Zarejestrowany: 2013-05-12
  • Posty: 31

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Witam

teraz chce zeby pod overlay podmontowal dysk o uuid=b7248e21-d71a-41a9-b9f6-acc384dc8673 [sda1], i ten jest tez wpisany do /etc/config/fstab (flash). a pomimo tego po kazdym restarcie pod overlay'a montuje dysk o uuid=0c211d73-1eca-4520-b596-9c630cc4bf03 [sdb1] (na ktorym obecnie dziala extroot) i zabardzo niewiem dlaczego on w ogole ten dysk (0c211d73-1eca-4520-b596-9c630cc4bf03) chce tam montowac. ponizej raz jeszcze fragment /etc/config/fstab oraz wynik polecenia mount

config mount
        option target '/overlay'
        option device '/dev/sda98'
        option options 'rw,noatime'
        option enabled_fsck '0'
        option enabled '1'
        option uuid 'b7248e21-d71a-41a9-b9f6-acc384dc8673'
        option fstype 'ext3'
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,noatime)
sysfs on /sys type sysfs (rw,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,noatime,mode=600)
/dev/sdb1 on /overlay type ext3 (rw,noatime,user_xattr,barrier=1,nodelalloc,data=ordered)
overlayfs:/overlay on / type overlayfs (rw,relatime,lowerdir=/,upperdir=/overlay)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
/dev/sda1 on /tmp/overlay-disabled type ext3 (rw,noatime,user_xattr,barrier=1,nodelalloc,data=ordered)
none on /proc/bus/usb type usbfs (rw,relatime)

736 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Ale ty patrzysz fstab na /overlay czy we flash?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

737 Odpowiedź przez karol04

  • Zarejestrowany: 2013-05-12
  • Posty: 31

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Witam

we flashu. a co jest dziwne to w overlay'u wyglada on tak samo. stad moje pytanie z pierwszego mail'a. czy jest jeszcze jakis plik konfiguracyjny z ktorego fstab korzysta, bo teraz nie zabardzo rozumiem, dlaczego on z takim uporem montuje pod overlay nie ten dysk ktory potrzeba

Pozdrawiam

738 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Nie ma. Odłącz oba nośniki, zrestartuj router, pozwól mu się uruchomić ze flash, nie podłączaj ich. I zobacz co tam jest w tym fstabie.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

739 Odpowiedź przez sciss

  • sciss
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-03-28
  • Posty: 151

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Mam problem z extrootem dla MR3220. Jest nim pen 4GB. Postępuję wg instrukcji w tym temacie i brak efektu.
System to najnowszy gargoyle by Cezary:

 | Gargoyle PL 1.5.10.4 (d078d2c)                               |
 | OpenWrt Attitude Adjustment 12.09 (r36871)                   |
 | Build time: 2013-06-22 10:00 CEST                            |
root@Serwer:~# mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,noatime)
sysfs on /sys type sysfs (rw,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime,size=14580k)
tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,noatime,mode=600)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlayfs (rw,relatime,lowerdir=/,upperdir=/overlay)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
none on /proc/bus/usb type usbfs (rw,relatime)
/dev/sda1 on /mnt/sda1 type ext2 (rw,relatime,user_xattr,barrier=1)
root@Serwer:~# df -h
Filesystem                Size      Used Available Use% Mounted on
rootfs                  384.0K    248.0K    136.0K  65% /
/dev/root                 2.5M      2.5M         0 100% /rom
tmpfs                    14.2M    124.0K     14.1M   1% /tmp
tmpfs                   512.0K         0    512.0K   0% /dev
/dev/mtdblock3          384.0K    248.0K    136.0K  65% /overlay
overlayfs:/overlay      384.0K    248.0K    136.0K  65% /
/dev/sda1                 3.6G      8.9M      3.6G   0% /mnt/sda1
root@Serwer:/etc/config# cat fstab

config global 'automount'
        option from_fstab '1'
        option anon_mount '1'

config global 'autoswap'
        option from_fstab '1'
        option anon_swap '0'

config swap
        option device '/dev/sda99'
        option enabled '0'

config mount
        option enabled '1'
        option uuid '1f4d66d-a771-410a-87c8-a8d298948ab1'
        option target '/overlay'
        option fstype 'ext2'
        option options 'rw,noatime'

Pendrive jest połączony przez pasywnego huba usb razem z modemem e3131. Myślałem, że może mocy nie starcza na zasilenie, ale po odłączeniu modemu wciąż nie działa, a także po wpięciu pendrive'a bezpośrednio bez huba.
Logread z pendrivem wpiętym w huba bez modemu:

Jan  1 01:00:40 Serwer kern.debug kernel: [    0.000000] MyLoader: sysp=f0f0f0f0, boardp=f0f0f0f0, parts=f0f0f0f0
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] bootconsole [early0] enabled
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] SoC: Atheros AR7241 rev 1
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:5.000MHz
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] Determined physical RAM map:
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000]  memory: 02000000 @ 00000000 (usable)
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Jan  1 01:00:40 Serwer kern.warn kernel: [    0.000000] Zone PFN ranges:
Jan  1 01:00:40 Serwer kern.warn kernel: [    0.000000]   Normal   0x00000000 -> 0x00002000
Jan  1 01:00:40 Serwer kern.warn kernel: [    0.000000] Movable zone start PFN for each node
Jan  1 01:00:40 Serwer kern.warn kernel: [    0.000000] Early memory PFN ranges
Jan  1 01:00:40 Serwer kern.warn kernel: [    0.000000]     0: 0x00000000 -> 0x00002000
Jan  1 01:00:40 Serwer kern.debug kernel: [    0.000000] On node 0 totalpages: 8192
Jan  1 01:00:40 Serwer kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 802fdd40, node_mem_map 81000000
Jan  1 01:00:40 Serwer kern.debug kernel: [    0.000000]   Normal zone: 64 pages used for memmap
Jan  1 01:00:40 Serwer kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Jan  1 01:00:40 Serwer kern.debug kernel: [    0.000000]   Normal zone: 8128 pages, LIFO batch:0
Jan  1 01:00:40 Serwer kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jan  1 01:00:40 Serwer kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Jan  1 01:00:40 Serwer kern.warn kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Jan  1 01:00:40 Serwer kern.notice kernel: [    0.000000] Kernel command line:  board=TL-MR3220 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 01:00:40 Serwer kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Jan  1 01:00:40 Serwer kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] Memory: 28940k/32768k available (2255k kernel code, 3828k reserved, 425k data, 216k init, 0k highmem)
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] NR_IRQS:51
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Jan  1 01:00:40 Serwer kern.info kernel: [    0.080000] pid_max: default: 32768 minimum: 301
Jan  1 01:00:40 Serwer kern.info kernel: [    0.080000] Mount-cache hash table entries: 512
Jan  1 01:00:40 Serwer kern.info kernel: [    0.090000] NET: Registered protocol family 16
Jan  1 01:00:40 Serwer kern.info kernel: [    0.090000] gpiochip_add: registered GPIOs 0 to 17 on device: ath79
Jan  1 01:00:40 Serwer kern.info kernel: [    0.100000] MIPS: machine is TP-LINK TL-MR3220
Jan  1 01:00:40 Serwer kern.warn kernel: [    0.500000] registering PCI controller with io_map_base unset
Jan  1 01:00:40 Serwer kern.info kernel: [    0.540000] bio: create slab <bio-0> at 0
Jan  1 01:00:40 Serwer kern.info kernel: [    0.550000] PCI host bridge to bus 0000:00
Jan  1 01:00:40 Serwer kern.info kernel: [    0.550000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
Jan  1 01:00:40 Serwer kern.info kernel: [    0.560000] pci_bus 0000:00: root bus resource [io  0x0000]
Jan  1 01:00:40 Serwer kern.debug kernel: [    0.560000] pci 0000:00:00.0: [168c:002b] type 0 class 0x000280
Jan  1 01:00:40 Serwer kern.info kernel: [    0.560000] pci 0000:00:00.0: fixup device configuration
Jan  1 01:00:40 Serwer kern.debug kernel: [    0.570000] pci 0000:00:00.0: reg 10: [mem 0x10000000-0x1000ffff 64bit]
Jan  1 01:00:40 Serwer kern.info kernel: [   11.460000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Jan  1 01:00:40 Serwer kern.info kernel: [   11.460000] hub 1-0:1.0: USB hub found
Jan  1 01:00:40 Serwer kern.info kernel: [   11.470000] hub 1-0:1.0: 1 port detected
Jan  1 01:00:40 Serwer kern.info kernel: [   11.530000] Initializing USB Mass Storage driver...
Jan  1 01:00:40 Serwer kern.info kernel: [   11.540000] usbcore: registered new interface driver usb-storage
Jan  1 01:00:40 Serwer kern.info kernel: [   11.540000] USB Mass Storage support registered.
Jan  1 01:00:40 Serwer kern.info kernel: [   11.790000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Jan  1 01:00:40 Serwer kern.info kernel: [   11.940000] hub 1-1:1.0: USB hub found
Jan  1 01:00:40 Serwer kern.info kernel: [   11.940000] hub 1-1:1.0: 4 ports detected
Jan  1 01:00:40 Serwer kern.info kernel: [   12.230000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
Jan  1 01:00:40 Serwer kern.info kernel: [   12.360000] scsi0 : usb-storage 1-1.1:1.0
Jan  1 01:00:40 Serwer kern.notice kernel: [   13.440000] scsi 0:0:0:0: Direct-Access     TOSHIBA  TransMemory      PMAP PQ: 0 ANSI: 0 CCS
Jan  1 01:00:40 Serwer kern.notice kernel: [   14.590000] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.92 GB/3.65 GiB)
Jan  1 01:00:40 Serwer kern.notice kernel: [   14.590000] sd 0:0:0:0: [sda] Write Protect is off
Jan  1 01:00:40 Serwer kern.debug kernel: [   14.600000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
Jan  1 01:00:40 Serwer kern.err kernel: [   14.600000] sd 0:0:0:0: [sda] No Caching mode page present
Jan  1 01:00:40 Serwer kern.err kernel: [   14.610000] sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan  1 01:00:40 Serwer kern.err kernel: [   14.620000] sd 0:0:0:0: [sda] No Caching mode page present
Jan  1 01:00:40 Serwer kern.err kernel: [   14.620000] sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan  1 01:00:40 Serwer kern.info kernel: [   14.650000]  sda: sda1
Jan  1 01:00:40 Serwer kern.err kernel: [   14.660000] sd 0:0:0:0: [sda] No Caching mode page present
Jan  1 01:00:40 Serwer kern.err kernel: [   14.660000] sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan  1 01:00:40 Serwer kern.notice kernel: [   14.670000] sd 0:0:0:0: [sda] Attached SCSI removable disk
Jan  1 01:00:40 Serwer kern.info kernel: [   33.040000] Compat-drivers backport release: compat-drivers-2013-01-21-1
Jan  1 01:00:40 Serwer kern.info kernel: [   33.050000] Backport based on wireless-testing.git master-2013-02-22
Jan  1 01:00:40 Serwer kern.info kernel: [   33.050000] compat.git: wireless-testing.git
Jan  1 01:00:40 Serwer kern.info kernel: [   33.230000] cfg80211: Calling CRDA to update world regulatory domain
Jan  1 01:00:40 Serwer kern.info kernel: [   33.230000] cfg80211: World regulatory domain updated:
Jan  1 01:00:40 Serwer kern.info kernel: [   33.240000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 01:00:40 Serwer kern.info kernel: [   33.250000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:00:40 Serwer kern.info kernel: [   33.250000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:00:40 Serwer kern.warn kernel: [   34.240000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Jan  1 01:00:40 Serwer kern.debug kernel: [   34.250000] ath: EEPROM regdomain: 0x0
Jan  1 01:00:40 Serwer kern.debug kernel: [   34.250000] ath: EEPROM indicates default country code should be used
Jan  1 01:00:40 Serwer kern.debug kernel: [   34.250000] ath: doing EEPROM country->regdmn map search
Jan  1 01:00:40 Serwer kern.debug kernel: [   34.250000] ath: country maps to regdmn code: 0x3a
Jan  1 01:00:40 Serwer kern.debug kernel: [   34.250000] ath: Country alpha2 being used: US
Jan  1 01:00:40 Serwer kern.debug kernel: [   34.250000] ath: Regpair used: 0x3a
Jan  1 01:00:40 Serwer kern.debug kernel: [   34.260000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Jan  1 01:00:40 Serwer kern.debug kernel: [   34.270000] Registered led device: ath9k-phy0
Jan  1 01:00:40 Serwer kern.info kernel: [   34.270000] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xb0000000, irq=40
Jan  1 01:00:40 Serwer kern.info kernel: [   34.270000] cfg80211: Calling CRDA for country: US
Jan  1 01:00:40 Serwer kern.info kernel: [   34.280000] cfg80211: Regulatory domain changed to country: US
Jan  1 01:00:40 Serwer kern.info kernel: [   34.280000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 01:00:40 Serwer kern.info kernel: [   34.290000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:00:40 Serwer kern.info kernel: [   34.300000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:00:40 Serwer kern.info kernel: [   34.540000] PPP generic driver version 2.4.2
Jan  1 01:00:40 Serwer kern.info kernel: [   34.630000] tun: Universal TUN/TAP device driver, 1.6
Jan  1 01:00:40 Serwer kern.info kernel: [   34.630000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan  1 01:00:40 Serwer kern.info kernel: [   34.750000] GRE over IPv4 demultiplexor driver
Jan  1 01:00:40 Serwer kern.warn kernel: [   34.770000] ip_gre: Unknown symbol icmpv6_send (err 0)
Jan  1 01:00:43 Serwer user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
Jan  1 01:00:43 Serwer user.notice usb-modeswitch: 1-1:1.0: Manufacturer=? Product=USB_2.0_Hub Serial=?
Jan  1 01:00:44 Serwer user.notice usb-modeswitch: 1-1.1:1.0: Manufacturer=TOSHIBA Product=TransMemory Serial=001CC0C5FC16EC60E31F0109
Jan  1 01:00:46 Serwer daemon.notice netifd: Interface 'lan' is now up
Jan  1 01:00:46 Serwer kern.info kernel: [   46.070000] device eth0 entered promiscuous mode
Jan  1 01:00:46 Serwer daemon.notice netifd: Interface 'loopback' is now up
Jan  1 01:00:51 Serwer kern.info kernel: [   51.190000] cfg80211: Calling CRDA for country: PL
Jan  1 01:00:51 Serwer kern.info kernel: [   51.190000] cfg80211: Regulatory domain changed to country: PL
Jan  1 01:00:51 Serwer kern.info kernel: [   51.200000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 01:00:51 Serwer kern.info kernel: [   51.210000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan  1 01:00:51 Serwer kern.info kernel: [   51.210000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan  1 01:00:51 Serwer kern.info kernel: [   51.220000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan  1 01:00:51 Serwer kern.info kernel: [   51.230000] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan  1 01:00:54 Serwer kern.info kernel: [   54.360000] device wlan0 entered promiscuous mode
Jan  1 01:00:55 Serwer kern.info kernel: [   55.100000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:00:55 Serwer kern.info kernel: [   55.110000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:00:57 Serwer kern.info kernel: [   57.110000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:00:04 Serwer user.info sysinit: Loading defaults
Jan  1 01:00:04 Serwer user.info sysinit: Loading synflood protection
Jan  1 01:00:05 Serwer user.info sysinit: Adding custom chains
Jan  1 01:00:06 Serwer user.info sysinit: Loading zones
Jan  1 01:00:07 Serwer user.info sysinit: Loading forwardings
Jan  1 01:00:07 Serwer user.info sysinit: Loading rules
Jan  1 01:00:08 Serwer user.info sysinit: Loading redirects
Jan  1 01:00:08 Serwer user.info sysinit: Loading includes
Jan  1 01:00:08 Serwer kern.warn kernel: [   66.150000] head: sending ioctl 540d to a partition!
Jan  1 01:00:08 Serwer kern.warn kernel: [   66.160000] head: sending ioctl 540d to a partition!
Jan  1 01:00:09 Serwer user.info sysinit: Optimizing conntrack
Jan  1 01:00:09 Serwer user.info sysinit: Loading interfaces
Jan  1 01:00:10 Serwer user.info firewall: adding lan (br-lan) to zone lan
Jan  1 01:00:12 Serwer kern.err kernel: [   70.460000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
Jan  1 01:00:12 Serwer kern.info kernel: [   70.480000] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
Jan  1 01:00:12 Serwer kern.warn kernel: [   70.500000] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
Jan  1 01:00:12 Serwer kern.info kernel: [   70.530000] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
Jan  1 01:00:13 Serwer authpriv.info dropbear[1855]: Running in background
Jan  1 01:00:13 Serwer daemon.warn httpd_gargoyle[1909]: started as root without requesting chroot(), warning only
Jan  1 01:00:13 Serwer daemon.notice httpd_gargoyle[1909]: httpd_gargoyle/1.0 14mar2008 starting on Serwer, port 80
Jan  1 01:00:14 Serwer user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Jan  1 01:00:14 Serwer user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Jan  1 01:00:17 Serwer daemon.info dnsmasq[2014]: started, version 2.62 cachesize 150
Jan  1 01:00:17 Serwer daemon.info dnsmasq[2014]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Jan  1 01:00:17 Serwer daemon.info dnsmasq-dhcp[2014]: DHCP, IP range 192.168.3.100 -- 192.168.3.249, lease time 12h
Jan  1 01:00:17 Serwer daemon.info dnsmasq[2014]: using local addresses only for domain lan
Jan  1 01:00:17 Serwer daemon.info dnsmasq[2014]: reading /tmp/resolv.conf.auto
Jan  1 01:00:17 Serwer daemon.info dnsmasq[2014]: using nameserver 192.168.1.1#53
Jan  1 01:00:17 Serwer daemon.info dnsmasq[2014]: using local addresses only for domain lan
Jan  1 01:00:17 Serwer daemon.info dnsmasq[2014]: read /etc/hosts - 9 addresses
Jan  1 01:00:17 Serwer daemon.info dnsmasq-dhcp[2014]: read /etc/ethers - 0 addresses
Jan  1 01:00:19 Serwer user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Jan  1 01:00:19 Serwer user.info sysinit: (Did you specify correct configuration file path?)
Jan  1 01:00:20 Serwer user.info sysinit: setting up led USB
Jan  1 01:00:21 Serwer user.notice upnp daemon: external interface not found, not starting
Jan  1 01:03:25 Serwer daemon.info hostapd: wlan0: STA 00:13:e8:32:eb:6f IEEE 802.11: authenticated
Jan  1 01:03:25 Serwer daemon.info hostapd: wlan0: STA 00:13:e8:32:eb:6f IEEE 802.11: associated (aid 1)
Jan  1 01:03:25 Serwer daemon.info hostapd: wlan0: STA 00:13:e8:32:eb:6f WPA: pairwise key handshake completed (RSN)
Jan  1 01:03:25 Serwer daemon.info dnsmasq-dhcp[2014]: DHCPREQUEST(br-lan) 192.168.3.121 00:13:e8:32:eb:6f 
Jan  1 01:03:25 Serwer daemon.info dnsmasq-dhcp[2014]: DHCPACK(br-lan) 192.168.3.121 00:13:e8:32:eb:6f sethaur
Jan  1 01:03:27 Serwer kern.warn kernel: [  264.950000] ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
Jan  1 01:03:27 Serwer kern.warn kernel: [  264.960000]                old minutes west=0, new minutes west=-60
Jan  1 01:03:31 Serwer authpriv.info dropbear[2254]: Child connection from 192.168.3.121:41698
Jan  1 01:03:33 Serwer authpriv.notice dropbear[2254]: Pubkey auth succeeded for 'root' with key md5 5a:7a:92:5b:a1:c6:10:35:cb:9e:95:8d:4e:cf:9e:66 from 192.168.3.121:41698

Logread z pendrivem wpiętym bez huba bezpośrednio w ruter:

Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] Memory: 28940k/32768k available (2255k kernel code, 3828k reserved, 425k data, 216k init, 0k highmem)
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] NR_IRQS:51
Jan  1 01:00:40 Serwer kern.info kernel: [    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Jan  1 01:00:40 Serwer kern.info kernel: [    0.080000] pid_max: default: 32768 minimum: 301
Jan  1 01:00:40 Serwer kern.info kernel: [    0.080000] Mount-cache hash table entries: 512
Jan  1 01:00:40 Serwer kern.info kernel: [    0.090000] NET: Registered protocol family 16
Jan  1 01:00:40 Serwer kern.info kernel: [    0.090000] gpiochip_add: registered GPIOs 0 to 17 on device: ath79
Jan  1 01:00:40 Serwer kern.info kernel: [    0.100000] MIPS: machine is TP-LINK TL-MR3220
Jan  1 01:00:40 Serwer kern.warn kernel: [    0.500000] registering PCI controller with io_map_base unset
Jan  1 01:00:40 Serwer kern.info kernel: [    0.540000] bio: create slab <bio-0> at 0
Jan  1 01:00:40 Serwer kern.info kernel: [    0.550000] PCI host bridge to bus 0000:00
Jan  1 01:00:40 Serwer kern.info kernel: [    0.550000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
Jan  1 01:00:40 Serwer kern.info kernel: [    0.560000] pci_bus 0000:00: root bus resource [io  0x0000]
Jan  1 01:00:40 Serwer kern.debug kernel: [    0.560000] pci 0000:00:00.0: [168c:002b] type 0 class 0x000280
Jan  1 01:00:40 Serwer kern.info kernel: [    0.560000] pci 0000:00:00.0: fixup device configuration
Jan  1 01:00:40 Serwer kern.debug kernel: [    0.570000] pci 0000:00:00.0: reg 10: [mem 0x10000000-0x1000ffff 64bit]
Jan  1 01:00:40 Serwer kern.debug kernel: [    0.570000] pci 0000:00:00.0: supports D1
Jan  1 01:00:40 Serwer kern.debug kernel: [    0.570000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Jan  1 01:00:40 Serwer kern.info kernel: [    0.570000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
Jan  1 01:00:40 Serwer kern.info kernel: [    0.570000] pci 0000:00:00.0: using irq 40 for pin 1
Jan  1 01:00:40 Serwer kern.info kernel: [    0.580000] Switching to clocksource MIPS
Jan  1 01:00:40 Serwer kern.info kernel: [    0.580000] NET: Registered protocol family 2
Jan  1 01:00:40 Serwer kern.info kernel: [    0.590000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 01:00:40 Serwer kern.info kernel: [    0.590000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Jan  1 01:00:40 Serwer kern.info kernel: [    0.600000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 01:00:40 Serwer kern.info kernel: [    0.600000] TCP: Hash tables configured (established 1024 bind 1024)
Jan  1 01:00:40 Serwer kern.info kernel: [    0.610000] TCP reno registered
Jan  1 01:00:40 Serwer kern.info kernel: [    0.610000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 01:00:40 Serwer kern.info kernel: [    0.620000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 01:00:40 Serwer kern.info kernel: [    0.630000] NET: Registered protocol family 1
Jan  1 01:00:40 Serwer kern.debug kernel: [    0.630000] PCI: CLS 0 bytes, default 32
Jan  1 01:00:40 Serwer kern.info kernel: [    0.650000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan  1 01:00:40 Serwer kern.info kernel: [    0.650000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Jan  1 01:00:40 Serwer kern.info kernel: [    0.670000] msgmni has been set to 56
Jan  1 01:00:40 Serwer kern.info kernel: [    0.670000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Jan  1 01:00:40 Serwer kern.info kernel: [    0.680000] io scheduler noop registered
Jan  1 01:00:40 Serwer kern.info kernel: [    0.680000] io scheduler deadline registered (default)
Jan  1 01:00:40 Serwer kern.info kernel: [    0.690000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Jan  1 01:00:40 Serwer kern.info kernel: [    0.720000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
Jan  1 01:00:40 Serwer kern.info kernel: [    0.720000] console [ttyS0] enabled, bootconsole disabled
Jan  1 01:00:40 Serwer kern.warn kernel: [    0.740000] m25p80 spi0.0: found w25q32, expected m25p80
Jan  1 01:00:40 Serwer kern.info kernel: [    0.750000] m25p80 spi0.0: w25q32 (4096 Kbytes)
Jan  1 01:00:40 Serwer kern.notice kernel: [    0.750000] 5 tp-link partitions found on MTD device spi0.0
Jan  1 01:00:40 Serwer kern.notice kernel: [    0.760000] Creating 5 MTD partitions on "spi0.0":
Jan  1 01:00:40 Serwer kern.notice kernel: [    0.760000] 0x000000000000-0x000000020000 : "u-boot"
Jan  1 01:00:40 Serwer kern.notice kernel: [    0.770000] 0x000000020000-0x000000110a00 : "kernel"
Jan  1 01:00:40 Serwer kern.warn kernel: [    0.770000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Jan  1 01:00:40 Serwer kern.notice kernel: [    0.790000] 0x000000110a00-0x0000003f0000 : "rootfs"
Jan  1 01:00:40 Serwer kern.warn kernel: [    0.790000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Jan  1 01:00:40 Serwer kern.notice kernel: [    0.810000] mtd: partition "rootfs" set to be root filesystem
Jan  1 01:00:40 Serwer kern.info kernel: [    0.810000] mtd: partition "rootfs_data" created automatically, ofs=390000, len=60000 
Jan  1 01:00:40 Serwer kern.notice kernel: [    0.820000] 0x000000390000-0x0000003f0000 : "rootfs_data"
Jan  1 01:00:40 Serwer kern.notice kernel: [    0.830000] 0x0000003f0000-0x000000400000 : "art"
Jan  1 01:00:40 Serwer kern.notice kernel: [    0.830000] 0x000000020000-0x0000003f0000 : "firmware"
Jan  1 01:00:40 Serwer kern.info kernel: [    0.860000] ag71xx_mdio: probed
Jan  1 01:00:40 Serwer kern.info kernel: [    0.860000] eth0: Atheros AG71xx at 0xba000000, irq 5
Jan  1 01:00:40 Serwer kern.info kernel: [    1.420000] eth0: Found an AR7240/AR9330 built-in switch
Jan  1 01:00:40 Serwer kern.info kernel: [    2.460000] eth1: Atheros AG71xx at 0xb9000000, irq 4
Jan  1 01:00:40 Serwer kern.info kernel: [   34.250000] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xb0000000, irq=40
Jan  1 01:00:40 Serwer kern.info kernel: [   34.260000] cfg80211: Calling CRDA for country: US
Jan  1 01:00:40 Serwer kern.info kernel: [   34.260000] cfg80211: Regulatory domain changed to country: US
Jan  1 01:00:40 Serwer kern.info kernel: [   34.270000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 01:00:40 Serwer kern.info kernel: [   34.280000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:00:40 Serwer kern.info kernel: [   34.290000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:00:40 Serwer kern.info kernel: [   34.520000] PPP generic driver version 2.4.2
Jan  1 01:00:40 Serwer kern.info kernel: [   34.610000] tun: Universal TUN/TAP device driver, 1.6
Jan  1 01:00:40 Serwer kern.info kernel: [   34.610000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan  1 01:00:40 Serwer kern.info kernel: [   34.730000] GRE over IPv4 demultiplexor driver
Jan  1 01:00:40 Serwer kern.warn kernel: [   34.750000] ip_gre: Unknown symbol icmpv6_send (err 0)
Jan  1 01:00:40 Serwer kern.info kernel: [   34.880000] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 01:00:40 Serwer kern.info kernel: [   35.480000] NET: Registered protocol family 24
Jan  1 01:00:40 Serwer kern.info kernel: [   35.640000] nf_conntrack version 0.5.0 (455 buckets, 1820 max)
Jan  1 01:00:40 Serwer kern.info kernel: [   36.050000] PPTP driver version 0.8.5
Jan  1 01:00:40 Serwer kern.info kernel: [   36.810000] xt_time: kernel timezone is -0000
Jan  1 01:00:40 Serwer kern.info kernel: [   37.690000]     Hooked IMQ after mangle on PREROUTING
Jan  1 01:00:40 Serwer kern.info kernel: [   37.690000]     Hooked IMQ after nat on POSTROUTING
Jan  1 01:00:40 Serwer kern.info kernel: [   37.700000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
Jan  1 01:00:40 Serwer kern.info kernel: [   37.920000] Netfilter messages via NETLINK v0.30.
Jan  1 01:00:40 Serwer kern.notice kernel: [   37.980000] ip_set: protocol 6
Jan  1 01:00:40 Serwer kern.info kernel: [   38.730000] usbcore: registered new interface driver cdc_acm
Jan  1 01:00:40 Serwer kern.info kernel: [   38.730000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan  1 01:00:40 Serwer kern.info kernel: [   38.890000] usbcore: registered new interface driver usbserial
Jan  1 01:00:40 Serwer kern.info kernel: [   38.900000] USB Serial support registered for generic
Jan  1 01:00:40 Serwer kern.info kernel: [   38.900000] usbcore: registered new interface driver usbserial_generic
Jan  1 01:00:40 Serwer kern.info kernel: [   38.910000] usbserial: USB Serial Driver core
Jan  1 01:00:40 Serwer kern.info kernel: [   38.960000] usbcore: registered new interface driver cdc_ether
Jan  1 01:00:40 Serwer kern.info kernel: [   39.050000] usbcore: registered new interface driver cdc_ncm
Jan  1 01:00:40 Serwer kern.info kernel: [   39.160000] USB Serial support registered for GSM modem (1-port)
Jan  1 01:00:40 Serwer kern.info kernel: [   39.170000] usbcore: registered new interface driver option
Jan  1 01:00:40 Serwer kern.info kernel: [   39.170000] option: v0.7.2:USB Driver for GSM modems
Jan  1 01:00:40 Serwer kern.info kernel: [   39.300000] USB Serial support registered for Sierra USB modem
Jan  1 01:00:40 Serwer kern.info kernel: [   39.310000] usbcore: registered new interface driver sierra
Jan  1 01:00:40 Serwer kern.info kernel: [   39.310000] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
Jan  1 01:00:43 Serwer user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
Jan  1 01:00:43 Serwer user.notice usb-modeswitch: 1-1:1.0: Manufacturer=TOSHIBA Product=TransMemory Serial=001CC0C5FC16EC60E31F0109
Jan  1 01:00:46 Serwer daemon.notice netifd: Interface 'lan' is now up
Jan  1 01:00:46 Serwer kern.info kernel: [   46.220000] device eth0 entered promiscuous mode
Jan  1 01:00:46 Serwer daemon.notice netifd: Interface 'loopback' is now up
Jan  1 01:00:51 Serwer kern.info kernel: [   51.260000] cfg80211: Calling CRDA for country: PL
Jan  1 01:00:51 Serwer kern.info kernel: [   51.260000] cfg80211: Regulatory domain changed to country: PL
Jan  1 01:00:51 Serwer kern.info kernel: [   51.270000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 01:00:51 Serwer kern.info kernel: [   51.280000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan  1 01:00:51 Serwer kern.info kernel: [   51.280000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan  1 01:00:51 Serwer kern.info kernel: [   51.290000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan  1 01:00:51 Serwer kern.info kernel: [   51.300000] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan  1 01:00:54 Serwer kern.info kernel: [   54.210000] device wlan0 entered promiscuous mode
Jan  1 01:00:54 Serwer kern.info kernel: [   54.940000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:00:54 Serwer kern.info kernel: [   54.950000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:00:56 Serwer kern.info kernel: [   56.950000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:00:04 Serwer user.info sysinit: Loading defaults
Jan  1 01:00:05 Serwer user.info sysinit: Loading synflood protection
Jan  1 01:00:05 Serwer user.info sysinit: Adding custom chains
Jan  1 01:00:06 Serwer user.info sysinit: Loading zones
Jan  1 01:00:07 Serwer user.info sysinit: Loading forwardings
Jan  1 01:00:07 Serwer user.info sysinit: Loading rules
Jan  1 01:00:08 Serwer user.info sysinit: Loading redirects
Jan  1 01:00:08 Serwer user.info sysinit: Loading includes
Jan  1 01:00:08 Serwer kern.warn kernel: [   66.290000] head: sending ioctl 540d to a partition!
Jan  1 01:00:08 Serwer kern.warn kernel: [   66.290000] head: sending ioctl 540d to a partition!
Jan  1 01:00:10 Serwer user.info sysinit: Optimizing conntrack
Jan  1 01:00:10 Serwer user.info sysinit: Loading interfaces
Jan  1 01:00:10 Serwer user.info firewall: adding lan (br-lan) to zone lan
Jan  1 01:00:12 Serwer kern.err kernel: [   70.330000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
Jan  1 01:00:12 Serwer kern.info kernel: [   70.350000] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
Jan  1 01:00:13 Serwer kern.warn kernel: [   70.370000] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
Jan  1 01:00:13 Serwer kern.info kernel: [   70.400000] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
Jan  1 01:00:13 Serwer authpriv.info dropbear[1839]: Running in background
Jan  1 01:00:14 Serwer daemon.warn httpd_gargoyle[1889]: started as root without requesting chroot(), warning only
Jan  1 01:00:14 Serwer daemon.notice httpd_gargoyle[1889]: httpd_gargoyle/1.0 14mar2008 starting on Serwer, port 80
Jan  1 01:00:15 Serwer user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Jan  1 01:00:15 Serwer user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Jan  1 01:00:18 Serwer daemon.info dnsmasq[1996]: started, version 2.62 cachesize 150
Jan  1 01:00:18 Serwer daemon.info dnsmasq[1996]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Jan  1 01:00:18 Serwer daemon.info dnsmasq-dhcp[1996]: DHCP, IP range 192.168.3.100 -- 192.168.3.249, lease time 12h
Jan  1 01:00:18 Serwer daemon.info dnsmasq[1996]: using local addresses only for domain lan
Jan  1 01:00:18 Serwer daemon.info dnsmasq[1996]: reading /tmp/resolv.conf.auto
Jan  1 01:00:18 Serwer daemon.info dnsmasq[1996]: using nameserver 192.168.1.1#53
Jan  1 01:00:18 Serwer daemon.info dnsmasq[1996]: using local addresses only for domain lan
Jan  1 01:00:18 Serwer daemon.info dnsmasq[1996]: read /etc/hosts - 9 addresses
Jan  1 01:00:18 Serwer daemon.info dnsmasq-dhcp[1996]: read /etc/ethers - 0 addresses
Jan  1 01:00:19 Serwer user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Jan  1 01:00:19 Serwer user.info sysinit: (Did you specify correct configuration file path?)
Jan  1 01:00:19 Serwer user.info sysinit: setting up led USB
Jan  1 01:00:21 Serwer user.notice upnp daemon: external interface not found, not starting
Jan  1 01:01:07 Serwer daemon.info hostapd: wlan0: STA 00:13:e8:32:eb:6f IEEE 802.11: authenticated
Jan  1 01:01:07 Serwer daemon.info hostapd: wlan0: STA 00:13:e8:32:eb:6f IEEE 802.11: associated (aid 1)
Jan  1 01:01:07 Serwer daemon.info hostapd: wlan0: STA 00:13:e8:32:eb:6f WPA: pairwise key handshake completed (RSN)
Jan  1 01:01:07 Serwer daemon.info dnsmasq-dhcp[1996]: DHCPREQUEST(br-lan) 192.168.3.121 00:13:e8:32:eb:6f 
Jan  1 01:01:07 Serwer daemon.info dnsmasq-dhcp[1996]: DHCPACK(br-lan) 192.168.3.121 00:13:e8:32:eb:6f sethaur
Jan  1 01:01:10 Serwer kern.warn kernel: [  127.600000] ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
Jan  1 01:01:10 Serwer kern.warn kernel: [  127.600000]                old minutes west=0, new minutes west=-60
Jan  1 01:01:16 Serwer authpriv.info dropbear[2252]: Child connection from 192.168.3.121:42276
Jan  1 01:01:19 Serwer authpriv.info dropbear[2253]: Child connection from 192.168.3.121:42279
Jan  1 01:01:19 Serwer authpriv.info dropbear[2252]: Exit before auth: Exited normally
Jan  1 01:01:21 Serwer authpriv.notice dropbear[2253]: Pubkey auth succeeded for 'root' with key md5 5a:7a:92:5b:a1:c6:10:35:cb:9e:95:8d:4e:cf:9e:66 from 192.168.3.121:42279

Można coś z tych logów wywróżyć?

740 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Wynik blkid pokaż.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

741 Odpowiedź przez sciss

  • sciss
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-03-28
  • Posty: 151

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

O kurka!

root@Serwer:~# blkid 
/dev/sda1: UUID="c1f4d66d-a771-410a-87c8-a8d298948ab1" TYPE="ext2"

W fstabie mam:
1f4d66d-a771-410a-87c8-a8d298948ab1
Byłbym pewien, że jest wstawiałem poprawne uuid. Końcówka się zresztą zgadza.
Zaraz poprawię i zobaczę czy zaskoczy.

742 Odpowiedź przez sciss

  • sciss
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-03-28
  • Posty: 151

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Poprawiłem, działa.
Jak to jest, że człowiek myśli że wszystko posprawdzał, a tu na takich podstawach się potyka, to ja nie wiem :]
Dzięki Cezary!

743 Odpowiedź przez karol04

  • Zarejestrowany: 2013-05-12
  • Posty: 31

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Witam

mam takie pytanko jak odinstalowac pakiet, jezeli jest on we flash'u? (komunikat opkg remove usb-modemswitch
Segmentation fault)

poraz kolejny (tym razem po chwilowym braku pradu) przestal dzialac mi extroot na uSD - modemu 173-2 (przelaczonego na stale) zresetowalem modem, wklepalem co trzeba do /etc/config/fstab i montuje mi go do /tmp/overlay-disabled ...

df -h

Filesystem                Size      Used Available Use% Mounted on
rootfs                  384.0K    248.0K    136.0K  65% /
/dev/root                 2.5M      2.5M         0 100% /rom
tmpfs                    14.3M    488.0K     13.8M   3% /tmp
tmpfs                   512.0K         0    512.0K   0% /dev
/dev/mtdblock3          384.0K    248.0K    136.0K  65% /overlay
overlayfs:/overlay      384.0K    248.0K    136.0K  65% /
/dev/sda1                 7.0G      2.1G      4.6G  32% /tmp/overlay-disabled

/etc/fstab

# WARNING: this is an auto generated file, please use uci to set defined filesys
/dev/sda1       /overlay        ext3    rw,noatime      0       0

/etc/config/fstab

config global 'automount'
        option from_fstab '1'
        option anon_mount '1'

config global 'autoswap'
        option from_fstab '1'
        option anon_swap '0'

config mount
        option target '/overlay'
        option device '/dev/sda1'
        option fstype 'ext3'
        option options 'rw,noatime'
        option uuid 'b7248e21-d71a-41a9-b9f6-acc384dc8673'
        option enabled_fsck '0'
        option enabled '1'

config swap
        option device '/dev/sda99'
        option enabled '0'

dmesg

[    0.000000] Linux version 3.3.8 (cezary@eko.one.pl) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #96 Mon May 6 15:06:11 CEST 2013
[    0.000000] MyLoader: sysp=7e32261f, boardp=2eeaf96f, parts=7e16f0c5
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001974c (MIPS 74Kc)
[    0.000000] SoC: Atheros AR9341 rev 1
[    0.000000] Clocks: CPU:535.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00002000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00002000
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 802f7d00, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8128 pages, LIFO batch:0
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=TL-MR3420-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 28968k/32768k available (2233k kernel code, 3800k reserved, 423k data, 216k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.090000] gpiochip_add: registered GPIOs 0 to 22 on device: ath79
[    0.100000] MIPS: machine is TP-LINK TL-MR3420 v2
[    0.520000] bio: create slab <bio-0> at 0
[    0.520000] Switching to clocksource MIPS
[    0.530000] NET: Registered protocol family 2
[    0.530000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.540000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.550000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.550000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.560000] TCP reno registered
[    0.560000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.570000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.570000] NET: Registered protocol family 1
[    0.580000] PCI: CLS 0 bytes, default 32
[    0.590000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.600000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.610000] msgmni has been set to 56
[    0.610000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.620000] io scheduler noop registered
[    0.630000] io scheduler deadline registered (default)
[    0.630000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.660000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[    0.670000] console [ttyS0] enabled, bootconsole disabled
[    0.680000] m25p80 spi0.0: found s25sl032a, expected m25p80
[    0.690000] m25p80 spi0.0: s25sl032a (4096 Kbytes)
[    0.690000] 5 tp-link partitions found on MTD device spi0.0
[    0.700000] Creating 5 MTD partitions on "spi0.0":
[    0.710000] 0x000000000000-0x000000020000 : "u-boot"
[    0.710000] 0x000000020000-0x00000010c378 : "kernel"
[    0.720000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.730000] 0x00000010c378-0x0000003f0000 : "rootfs"
[    0.740000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.750000] mtd: partition "rootfs" set to be root filesystem
[    0.760000] mtd: partition "rootfs_data" created automatically, ofs=390000, len=60000 
[    0.770000] 0x000000390000-0x0000003f0000 : "rootfs_data"
[    0.770000] 0x0000003f0000-0x000000400000 : "art"
[    0.780000] 0x000000020000-0x0000003f0000 : "firmware"
[    0.810000] ag71xx_mdio: probed
[    0.810000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[    1.370000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
[    1.380000] eth1: Atheros AG71xx at 0xba000000, irq 5
[    1.930000] eth1: Found an AR934X built-in switch
[    2.970000] TCP cubic registered
[    2.970000] NET: Registered protocol family 17
[    2.970000] Bridge firewalling registered
[    2.980000] Ebtables v2.0 registered
[    2.980000] 8021q: 802.1Q VLAN Support v1.8
[    2.990000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    3.000000] Freeing unused kernel memory: 216k freed
[    4.980000] Registered led device: tp-link:green:lan1
[    4.980000] Registered led device: tp-link:green:lan2
[    4.980000] Registered led device: tp-link:green:lan3
[    4.980000] Registered led device: tp-link:green:lan4
[    4.980000] Registered led device: tp-link:green:qss
[    4.980000] Registered led device: tp-link:green:system
[    4.980000] Registered led device: tp-link:green:wan
[    4.990000] Registered led device: tp-link:green:wlan
[    4.990000] Registered led device: tp-link:green:3g
[    8.270000] JFFS2 notice: (452) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (1 unchecked, 1 orphan) and 61 of xref (0 dead, 48 orphan) found.
[    8.990000] SCSI subsystem initialized
[    9.180000] usbcore: registered new interface driver usbfs
[    9.180000] usbcore: registered new interface driver hub
[    9.190000] usbcore: registered new device driver usb
[    9.660000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.660000] ehci-platform ehci-platform: Generic Platform EHCI Controller
[    9.670000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    9.710000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    9.730000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    9.730000] hub 1-0:1.0: USB hub found
[    9.740000] hub 1-0:1.0: 1 port detected
[    9.790000] Initializing USB Mass Storage driver...
[    9.790000] usbcore: registered new interface driver usb-storage
[    9.800000] USB Mass Storage support registered.
[   10.060000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[   10.220000] scsi3 : usb-storage 1-1:1.3
[   11.220000] scsi 3:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[   11.230000] sd 3:0:0:0: [sda] Attached SCSI removable disk
[   50.020000] sd 3:0:0:0: [sda] 15552512 512-byte logical blocks: (7.96 GB/7.41 GiB)
[   50.040000] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   50.060000]  sda: sda1 sda2
[   51.120000] Compat-drivers backport release: compat-drivers-2013-01-21-1
[   51.130000] Backport based on wireless-testing.git master-2013-02-22
[   51.140000] compat.git: wireless-testing.git
[   51.280000] cfg80211: Calling CRDA to update world regulatory domain
[   51.290000] cfg80211: World regulatory domain updated:
[   51.290000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   51.300000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   51.310000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   52.120000] ath: EEPROM regdomain: 0x0
[   52.120000] ath: EEPROM indicates default country code should be used
[   52.120000] ath: doing EEPROM country->regdmn map search
[   52.120000] ath: country maps to regdmn code: 0x3a
[   52.120000] ath: Country alpha2 being used: US
[   52.120000] ath: Regpair used: 0x3a
[   52.130000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   52.140000] Registered led device: ath9k-phy0
[   52.140000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
[   52.140000] cfg80211: Calling CRDA for country: US
[   52.150000] cfg80211: Regulatory domain changed to country: US
[   52.160000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   52.160000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   52.170000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   52.370000] PPP generic driver version 2.4.2
[   52.430000] tun: Universal TUN/TAP device driver, 1.6
[   52.440000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   52.530000] GRE over IPv4 demultiplexor driver
[   52.550000] ip_gre: Unknown symbol icmpv6_send (err 0)
[   52.660000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   53.130000] NET: Registered protocol family 24
[   53.260000] nf_conntrack version 0.5.0 (456 buckets, 1824 max)
[   53.590000] PPTP driver version 0.8.5
[   54.200000] xt_time: kernel timezone is -0000
[   54.900000]     Hooked IMQ after mangle on PREROUTING
[   54.910000]     Hooked IMQ after nat on POSTROUTING
[   54.910000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
[   55.090000] Netfilter messages via NETLINK v0.30.
[   55.140000] ip_set: protocol 6
[   55.740000] usbcore: registered new interface driver cdc_acm
[   55.740000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   55.870000] usbcore: registered new interface driver usbserial
[   55.880000] USB Serial support registered for generic
[   55.880000] usbcore: registered new interface driver usbserial_generic
[   55.890000] usbserial: USB Serial Driver core
[   55.930000] usbcore: registered new interface driver cdc_ether
[   56.000000] usbcore: registered new interface driver cdc_ncm
[   56.090000] USB Serial support registered for GSM modem (1-port)
[   56.100000] option 1-1:1.0: GSM modem (1-port) converter detected
[   56.100000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[   56.110000] option 1-1:1.1: GSM modem (1-port) converter detected
[   56.120000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[   56.130000] option 1-1:1.2: GSM modem (1-port) converter detected
[   56.130000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[   56.140000] usbcore: registered new interface driver option
[   56.150000] option: v0.7.2:USB Driver for GSM modems
[   56.250000] USB Serial support registered for Sierra USB modem
[   56.260000] usbcore: registered new interface driver sierra
[   56.260000] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[   58.910000] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   58.940000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   62.240000] device eth1 entered promiscuous mode
[   62.840000] eth1: link up (1000Mbps/Full duplex)
[   62.840000] br-lan: port 1(eth1) entered forwarding state
[   62.850000] br-lan: port 1(eth1) entered forwarding state
[   64.850000] br-lan: port 1(eth1) entered forwarding state
[  105.420000] ipt_bandwidth: timezone shift of 120 minutes detected, adjusting
[  105.430000]                old minutes west=0, new minutes west=-120
[  113.110000] head: sending ioctl 540d to a partition!
[  113.110000] head: sending ioctl 540d to a partition!
[  115.840000] head: sending ioctl 540d to a partition!
[  115.840000] head: sending ioctl 540d to a partition!

zwiekszalem czas w /lib/preinit/00_extroot.conf

kasowalem .extroot.md5sum
kopiowalem .extroot.md5sum do /tmp/overlay-disabled/etc/extroot.md5sum

nic nie pomaga. poprzednim razem po przypadkowym resecie modemu tez bardzo dlugo nie moglem odpalic extroot'a i szczerze mowiac niewiem dlaczego w koncu zaczal odpalac z uSD - tzn ktory z krokow pomogl

teraz doszedlem do wniosku ze moze pakiet usb-modemswitch bruzdzi, ale nie moge go usunac

Pozdrawiam
Dziekuje z gory za pomoc

744 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

1. Sprawdź system plików.
2. Zainstaluj zwykłe opkg to odinstalujesz: http://eko.one.pl/forum/viewtopic.php?pid=73553#p73553

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

745 Odpowiedź przez karol04

  • Zarejestrowany: 2013-05-12
  • Posty: 31

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Witam

modem wpialem do blaszaka, sprawdzilem

fsck.ext3 /dev/sdb1
e2fsck 1.42 (29-Nov-2011)
/dev/sdb1: czysty, 13476/470496 plików, 594036/1881347 bloków

pakietu usunac nie moge
opkg remove usb-modemswitch
No packages removed.

a pakiety jest zainstalowany
opkg list-installed
...
usb-modeswitch - 1.2.5-1
usb-modeswitch-data - 20121109-1

czy po resecie modemu jest jakas konkretna sciezka dzialania zmierzajaca do przywrocenia extroot'a ? przeciez skoro dzialal, a przestal dzialac to musi to miec z czyms zwiazek - jak nie sumy kontrolne, to jakis plik konfiguracyjny ktory sprawia, ze extroot laduje w temp'ie

Pozdrawiam

746 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Albo błedy nośnika albo suma kontrolna. Innych nie ma powodów.

opkg normalnie zainstalowałeś?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

747 Odpowiedź przez karol04

  • Zarejestrowany: 2013-05-12
  • Posty: 31

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Witam

root@Gargoyle:~# opkg install opkg
Preparing to install the following packages, which will require 57027 bytes:
    opkg

Preparing to install package opkg...
    Downloading...
    Downloaded opkg successfully.
    Installing opkg...
    Successfully installed opkg.
Installation of packages successful.

root@Gargoyle:~# opkg remove usb-modemswitch
No packages removed.
root@Gargoyle:~# opkg remove usb-modemswitch-data
No packages removed.
root@Gargoyle:~#

jakas sugestia ?

Pozdrawiam

748 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Podstawowa: usb-modeswitch a nie usb-modemswitch

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

749 Odpowiedź przez karol04

  • Zarejestrowany: 2013-05-12
  • Posty: 31

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Witam

No racja

rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,noatime)
sysfs on /sys type sysfs (rw,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,noatime,mode=600)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlayfs (rw,relatime,lowerdir=/,upperdir=/overlay)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
none on /proc/bus/usb type usbfs (rw,relatime)
/dev/sda1 on /overlay type ext3 (rw,noatime,user_xattr,barrier=1,nodelalloc,data=ordered)


czy to oznacza, ze extroot jest poprawnie zamontowany ?

Pozdrawiam

750 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040

Nie.
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
/dev/sda1 on /overlay type ext3 (rw,noatime,user_xattr,barrier=1,nodelalloc,data=ordered)

Jest zamontowany w katalogu /overlay, ale extroot toto nie jest.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona