• Zarejestrowany: 2013-06-07
  • Posty: 13

Temat: PPPoE 1043ND

Witam serdecznie.
Po zakupie routerka tp-link 1043ND wgrałem na niego najnowszego gargoyle'a '1.5.10.1'. Wszystko poszło zgodnie z planem, jednak mimo poprawnej konfiguracji ustawień PPPoe nie jest on w stanie dostać od providera adresu.
Jakieś pomysły ? Propozycje ?
ustawienia sieci:
http://content.screencast.com/users/Pawel.Borecki/folders/Jing/media/c036f1a5-2434-455f-bd57-48d0ba33a943/2013-06-07_0109.png
tak wygląda ifonfig:
http://content.screencast.com/users/Pawel.Borecki/folders/Jing/media/04a92320-5968-4c44-895c-3d365711af0f/2013-06-07_0112.png
Logread:

Jan  1 01:00:40 Gargoyle kern.info kernel: [   30.200000] cfg80211: Calling CRDA to update world regulatory domain
Jan  1 01:00:40 Gargoyle kern.info kernel: [   30.200000] cfg80211: World regulatory domain updated:
Jan  1 01:00:40 Gargoyle kern.info kernel: [   30.210000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 01:00:40 Gargoyle kern.info kernel: [   30.210000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:00:40 Gargoyle kern.info kernel: [   30.220000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:00:40 Gargoyle kern.debug kernel: [   31.620000] ath: EEPROM regdomain: 0x0
Jan  1 01:00:40 Gargoyle kern.debug kernel: [   31.620000] ath: EEPROM indicates default country code should be used
Jan  1 01:00:40 Gargoyle kern.debug kernel: [   31.620000] ath: doing EEPROM country->regdmn map search
Jan  1 01:00:40 Gargoyle kern.debug kernel: [   31.620000] ath: country maps to regdmn code: 0x3a
Jan  1 01:00:40 Gargoyle kern.debug kernel: [   31.620000] ath: Country alpha2 being used: US
Jan  1 01:00:40 Gargoyle kern.debug kernel: [   31.620000] ath: Regpair used: 0x3a
Jan  1 01:00:40 Gargoyle kern.debug kernel: [   31.620000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Jan  1 01:00:40 Gargoyle kern.info kernel: [   31.630000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
Jan  1 01:00:40 Gargoyle kern.info kernel: [   31.640000] cfg80211: Calling CRDA for country: US
Jan  1 01:00:40 Gargoyle kern.info kernel: [   31.650000] cfg80211: Regulatory domain changed to country: US
Jan  1 01:00:40 Gargoyle kern.info kernel: [   31.650000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 01:00:40 Gargoyle kern.info kernel: [   31.660000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:00:40 Gargoyle kern.info kernel: [   31.670000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:00:40 Gargoyle kern.info kernel: [   31.910000] RPC: Registered named UNIX socket transport module.
Jan  1 01:00:40 Gargoyle kern.info kernel: [   31.920000] RPC: Registered udp transport module.
Jan  1 01:00:40 Gargoyle kern.info kernel: [   31.920000] RPC: Registered tcp transport module.
Jan  1 01:00:40 Gargoyle kern.info kernel: [   31.930000] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 01:00:40 Gargoyle kern.info kernel: [   32.520000] PPP generic driver version 2.4.2
Jan  1 01:00:40 Gargoyle kern.info kernel: [   32.670000] tun: Universal TUN/TAP device driver, 1.6
Jan  1 01:00:40 Gargoyle kern.info kernel: [   32.670000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan  1 01:00:40 Gargoyle kern.info kernel: [   32.790000] GRE over IPv4 demultiplexor driver
Jan  1 01:00:40 Gargoyle kern.warn kernel: [   32.820000] ip_gre: Unknown symbol icmpv6_send (err 0)
Jan  1 01:00:40 Gargoyle kern.info kernel: [   33.170000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan  1 01:00:40 Gargoyle kern.info kernel: [   33.280000] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 01:00:40 Gargoyle kern.info kernel: [   33.720000] NET: Registered protocol family 24
Jan  1 01:00:40 Gargoyle kern.info kernel: [   33.880000] nf_conntrack version 0.5.0 (455 buckets, 1820 max)
Jan  1 01:00:40 Gargoyle kern.info kernel: [   34.410000] PPTP driver version 0.8.5
Jan  1 01:00:40 Gargoyle kern.info kernel: [   35.210000] xt_time: kernel timezone is -0000
Jan  1 01:00:40 Gargoyle kern.info kernel: [   36.060000]       Hooked IMQ after mangle on PREROUTING
Jan  1 01:00:40 Gargoyle kern.info kernel: [   36.070000]       Hooked IMQ after nat on POSTROUTING
Jan  1 01:00:40 Gargoyle kern.info kernel: [   36.070000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
Jan  1 01:00:40 Gargoyle kern.info kernel: [   36.260000] Netfilter messages via NETLINK v0.30.
Jan  1 01:00:40 Gargoyle kern.notice kernel: [   36.500000] ip_set: protocol 6
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.150000] usbcore: registered new interface driver cdc_acm
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.150000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.310000] usbcore: registered new interface driver usblp
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.350000] usbcore: registered new interface driver usbserial
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.350000] USB Serial support registered for generic
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.360000] usbcore: registered new interface driver usbserial_generic
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.360000] usbserial: USB Serial Driver core
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.470000] USB Serial support registered for Sierra USB modem
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.480000] usbcore: registered new interface driver sierra
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.480000] sierra: v.1.7.40:USB Driver for Sierra Wireless USB modems
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.510000] usbcore: registered new interface driver sierra_net
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.670000] usbcore: registered new interface driver ums-alauda
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.700000] usbcore: registered new interface driver ums-cypress
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.720000] usbcore: registered new interface driver ums-datafab
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.800000] usbcore: registered new interface driver ums-freecom
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.820000] usbcore: registered new interface driver ums-isd200
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.850000] usbcore: registered new interface driver ums-jumpshot
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.880000] usbcore: registered new interface driver ums-karma
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.910000] usbcore: registered new interface driver ums-sddr09
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.930000] usbcore: registered new interface driver ums-sddr55
Jan  1 01:00:40 Gargoyle kern.info kernel: [   37.960000] usbcore: registered new interface driver ums-usbat
Jan  1 01:00:40 Gargoyle kern.info kernel: [   38.060000] usbcore: registered new interface driver cdc_ether
Jan  1 01:00:40 Gargoyle kern.info kernel: [   38.110000] usbcore: registered new interface driver cdc_ncm
Jan  1 01:00:40 Gargoyle kern.info kernel: [   38.220000] USB Serial support registered for GSM modem (1-port)
Jan  1 01:00:40 Gargoyle kern.info kernel: [   38.220000] usbcore: registered new interface driver option
Jan  1 01:00:40 Gargoyle kern.info kernel: [   38.230000] option: v0.7.2:USB Driver for GSM modems
Jan  1 01:00:40 Gargoyle kern.info kernel: [   38.310000] USB Serial support registered for Qualcomm USB modem
Jan  1 01:00:40 Gargoyle kern.info kernel: [   38.320000] usbcore: registered new interface driver qcserial
Jan  1 01:00:40 Gargoyle kern.info kernel: [   38.480000] fuse init (API version 7.18)
Jan  1 01:00:44 Gargoyle kern.debug kernel: [   44.040000] ar71xx: pll_reg 0xb8050014: 0x1a000000
Jan  1 01:00:44 Gargoyle kern.info kernel: [   44.040000] eth0: link up (1000Mbps/Full duplex)
Jan  1 01:00:44 Gargoyle kern.info kernel: [   44.050000] device eth0.1 entered promiscuous mode
Jan  1 01:00:44 Gargoyle kern.info kernel: [   44.050000] device eth0 entered promiscuous mode
Jan  1 01:00:44 Gargoyle kern.info kernel: [   44.060000] br-lan: port 1(eth0.1) entered forwarding state
Jan  1 01:00:44 Gargoyle kern.info kernel: [   44.060000] br-lan: port 1(eth0.1) entered forwarding state
Jan  1 01:00:44 Gargoyle daemon.notice netifd: Interface 'lan' is now up
Jan  1 01:00:44 Gargoyle daemon.notice netifd: Interface 'loopback' is now up
Jan  1 01:00:45 Gargoyle daemon.info pppd[822]: Plugin rp-pppoe.so loaded.
Jan  1 01:00:45 Gargoyle daemon.info pppd[822]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
Jan  1 01:00:45 Gargoyle daemon.notice pppd[822]: pppd 2.4.5 started by root, uid 0
Jan  1 01:00:45 Gargoyle daemon.info pppd[822]: Using interface pppoe-wan
Jan  1 01:00:45 Gargoyle daemon.notice pppd[822]: local  IP address 10.64.64.64
Jan  1 01:00:45 Gargoyle daemon.notice pppd[822]: remote IP address 10.112.112.112
Jan  1 01:00:46 Gargoyle kern.info kernel: [   46.060000] br-lan: port 1(eth0.1) entered forwarding state
Jan  1 01:00:48 Gargoyle user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
Jan  1 01:00:49 Gargoyle kern.info kernel: [   49.140000] device wlan0 entered promiscuous mode
Jan  1 01:00:49 Gargoyle kern.info kernel: [   49.190000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:00:49 Gargoyle kern.info kernel: [   49.200000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:00:51 Gargoyle kern.info kernel: [   51.200000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:13:24 Gargoyle user.info sysinit: Loading defaults
Jan  1 01:13:24 Gargoyle user.info sysinit: Loading synflood protection
Jan  1 01:13:24 Gargoyle user.info sysinit: Adding custom chains
Jan  1 01:13:25 Gargoyle user.info sysinit: Loading zones
Jan  1 01:13:26 Gargoyle user.info sysinit: Loading forwardings
Jan  1 01:13:26 Gargoyle user.info sysinit: Loading rules
Jan  1 01:13:27 Gargoyle user.info sysinit: Loading redirects
Jan  1 01:13:27 Gargoyle user.info sysinit: Loading includes
Jan  1 01:13:28 Gargoyle user.info sysinit: udhcpc (v1.19.4) started
Jan  1 01:13:28 Gargoyle user.info sysinit: Sending discover...
Jan  1 01:13:31 Gargoyle user.info sysinit: Sending discover...
Jan  1 01:13:35 Gargoyle user.info sysinit: Sending discover...
Jan  1 01:13:38 Gargoyle user.info sysinit: No lease, failing
Jan  1 01:13:38 Gargoyle user.info sysinit: Optimizing conntrack
Jan  1 01:13:38 Gargoyle user.info sysinit: Loading interfaces
Jan  1 01:13:38 Gargoyle user.info firewall: adding lan (br-lan) to zone lan
Jan  1 01:13:40 Gargoyle authpriv.info dropbear[1975]: Running in background
Jan  1 01:13:40 Gargoyle daemon.warn httpd_gargoyle[2002]: started as root without requesting chroot(), warning only
Jan  1 01:13:40 Gargoyle daemon.notice httpd_gargoyle[2002]: httpd_gargoyle/1.0 14mar2008 starting on Gargoyle, port 80
Jan  1 01:13:41 Gargoyle user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Jan  1 01:13:41 Gargoyle user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Jan  1 01:13:45 Gargoyle daemon.info dnsmasq[2055]: started, version 2.62 cachesize 150
Jan  1 01:13:45 Gargoyle daemon.info dnsmasq[2055]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Jan  1 01:13:45 Gargoyle daemon.info dnsmasq-dhcp[2055]: DHCP, IP range 192.168.1.2 -- 192.168.1.249, lease time 1d
Jan  1 01:13:45 Gargoyle daemon.info dnsmasq[2055]: using local addresses only for domain lan
Jan  1 01:13:45 Gargoyle daemon.info dnsmasq[2055]: reading /tmp/resolv.conf.auto
Jan  1 01:13:45 Gargoyle daemon.info dnsmasq[2055]: using nameserver 8.8.4.4#53
Jan  1 01:13:45 Gargoyle daemon.info dnsmasq[2055]: using nameserver 8.8.8.8#53
Jan  1 01:13:45 Gargoyle daemon.info dnsmasq[2055]: using local addresses only for domain lan
Jan  1 01:13:45 Gargoyle daemon.info dnsmasq[2055]: read /etc/hosts - 2 addresses
Jan  1 01:13:45 Gargoyle daemon.info dnsmasq-dhcp[2055]: read /etc/ethers - 0 addresses
Jan  1 01:13:45 Gargoyle user.err syslog: error starting threads: errno 89 (Function not implemented)
Jan  1 01:13:45 Gargoyle user.info sysinit: exportfs: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Jan  1 01:13:45 Gargoyle user.info sysinit: exportfs: can't lock /var/lib/nfs/etab for writing
Jan  1 01:13:45 Gargoyle user.info sysinit: exportfs: could not open /var/lib/nfs/.xtab.lock for locking: errno 2 (No such file or directory)
Jan  1 01:13:45 Gargoyle user.info sysinit: exportfs: can't lock /var/lib/nfs/xtab for writing
Jan  1 01:13:49 Gargoyle user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Jan  1 01:13:49 Gargoyle user.info sysinit: (Did you specify correct configuration file path?)
Jan  1 01:14:14 Gargoyle user.notice root: vsftpd init: mounted = 0
Jan  1 01:14:14 Gargoyle user.info sysinit: ERROR: No drives attached, no directories to share!
Jan  1 01:14:14 Gargoyle user.info sysinit: setting up led USB
Jan  1 01:14:14 Gargoyle user.info sysinit: setting up led WLAN
Jan  1 01:19:46 Gargoyle daemon.info hostapd: wlan0: STA 08:11:96:a7:ba:8c IEEE 802.11: authenticated
Jan  1 01:19:46 Gargoyle daemon.info hostapd: wlan0: STA 08:11:96:a7:ba:8c IEEE 802.11: associated (aid 1)
Jan  1 01:19:47 Gargoyle daemon.info dnsmasq-dhcp[2055]: DHCPREQUEST(br-lan) 192.168.1.38 08:11:96:a7:ba:8c
Jan  1 01:19:47 Gargoyle daemon.info dnsmasq-dhcp[2055]: DHCPACK(br-lan) 192.168.1.38 08:11:96:a7:ba:8c pawelPC
Jan  1 01:19:51 Gargoyle authpriv.info dropbear[2240]: Child connection from 192.168.1.38:53927
Jan  1 01:19:54 Gargoyle authpriv.notice dropbear[2240]: Password auth succeeded for 'root' from 192.168.1.38:53927
Jan  1 01:19:54 Gargoyle authpriv.info dropbear[2240]: Exit (root): Exited normally
Jan  1 01:19:58 Gargoyle authpriv.info dropbear[2243]: Child connection from 192.168.1.38:53930
Jan  1 01:20:01 Gargoyle authpriv.notice dropbear[2243]: Password auth succeeded for 'root' from 192.168.1.38:53930
Jan  1 01:20:01 Gargoyle authpriv.info dropbear[2243]: Exit (root): Exited normally
Jan  1 01:20:03 Gargoyle authpriv.info dropbear[2246]: Child connection from 192.168.1.38:53931
Jan  1 01:20:06 Gargoyle authpriv.notice dropbear[2246]: Password auth succeeded for 'root' from 192.168.1.38:53931
Jan  1 01:20:06 Gargoyle authpriv.info dropbear[2246]: Exit (root): Exited normally
Jan  1 01:20:22 Gargoyle authpriv.info dropbear[2249]: Child connection from 192.168.1.38:53932
Jan  1 01:20:25 Gargoyle authpriv.notice dropbear[2249]: Password auth succeeded for 'root' from 192.168.1.38:53932
Jan  1 01:20:56 Gargoyle authpriv.info dropbear[2307]: Child connection from 192.168.1.38:53933
Jan  1 01:20:59 Gargoyle authpriv.notice dropbear[2307]: Password auth succeeded for 'root' from 192.168.1.38:53933
Jan  1 01:25:24 Gargoyle daemon.info hostapd: wlan0: STA 08:11:96:a7:ba:8c IEEE 802.11: authenticated
Jan  1 01:25:24 Gargoyle daemon.info hostapd: wlan0: STA 08:11:96:a7:ba:8c IEEE 802.11: associated (aid 1)
Jan  1 01:25:25 Gargoyle daemon.info dnsmasq-dhcp[2055]: DHCPREQUEST(br-lan) 192.168.1.38 08:11:96:a7:ba:8c
Jan  1 01:25:25 Gargoyle daemon.info dnsmasq-dhcp[2055]: DHCPACK(br-lan) 192.168.1.38 08:11:96:a7:ba:8c pawelPC
Jan  1 01:25:29 Gargoyle authpriv.info dropbear[2372]: Child connection from 192.168.1.38:53980
Jan  1 01:25:32 Gargoyle authpriv.notice dropbear[2372]: Password auth succeeded for 'root' from 192.168.1.38:53980
Jan  1 01:26:48 Gargoyle authpriv.info dropbear[2423]: Child connection from 192.168.1.38:53983
Jan  1 01:26:51 Gargoyle authpriv.notice dropbear[2423]: Password auth succeeded for 'root' from 192.168.1.38:53983
Jan  1 01:46:14 Gargoyle daemon.info hostapd: wlan0: STA 08:11:96:a7:ba:8c IEEE 802.11: authenticated
Jan  1 01:46:14 Gargoyle daemon.info hostapd: wlan0: STA 08:11:96:a7:ba:8c IEEE 802.11: associated (aid 1)
Jan  1 01:46:14 Gargoyle daemon.info dnsmasq-dhcp[2055]: DHCPREQUEST(br-lan) 192.168.1.38 08:11:96:a7:ba:8c
Jan  1 01:46:14 Gargoyle daemon.info dnsmasq-dhcp[2055]: DHCPACK(br-lan) 192.168.1.38 08:11:96:a7:ba:8c pawelPC
Jan  1 01:46:20 Gargoyle authpriv.info dropbear[2496]: Child connection from 192.168.1.38:54241
Jan  1 01:46:22 Gargoyle authpriv.notice dropbear[2496]: Password auth succeeded for 'root' from 192.168.1.38:54241
Jan  1 01:46:27 Gargoyle authpriv.info dropbear[2547]: Child connection from 192.168.1.38:54242
Jan  1 01:46:29 Gargoyle authpriv.notice dropbear[2547]: Password auth succeeded for 'root' from 192.168.1.38:54242

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,252

Odp: PPPoE 1043ND

Hmm, a jaki powinineś dostać?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez Uriziel01

  • Zarejestrowany: 2013-06-07
  • Posty: 13

Odp: PPPoE 1043ND

Jakikolwiek ? smile Jeżeli to czemuś posłuży mogę po powrocie z pracy na starym wr340G sprawdzić jaki on dostaje ale to jest chyba dhcp więc nie powinno to mieć znaczenia ?

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,252

Odp: PPPoE 1043ND

No to masz przecież 10.64.64.64

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez Uriziel01 (edytowany przez Uriziel01 2013-06-07 06:37:41)

  • Zarejestrowany: 2013-06-07
  • Posty: 13

Odp: PPPoE 1043ND

Tak, tylko takie IP dostaje nawet jeżeli kabel WAN jest wypiety z portu. W dodatku te dane z wan'a widzę jedynie w ifconfigu a w GUI gargoyla już ich nie ma, w statusie jest wszystko puste w sekcji WAN.

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,252

Odp: PPPoE 1043ND

To zrób teraz ifup wan i zobacz.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez Uriziel01

  • Zarejestrowany: 2013-06-07
  • Posty: 13

Odp: PPPoE 1043ND

Sprawdzałem wielokrotnie, niestety to nie przynosi żadnych efektów.

8 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,252

Odp: PPPoE 1043ND

Co masz wtedy w logach?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

9 Odpowiedź przez Uriziel01

  • Zarejestrowany: 2013-06-07
  • Posty: 13

Odp: PPPoE 1043ND

Teraz tego nie sprawdzę, ale po godzinie 15.00 wrzucę tutaj logi.

10 Odpowiedź przez Uriziel01

  • Zarejestrowany: 2013-06-07
  • Posty: 13

Odp: PPPoE 1043ND

Mam nadzieje że to pomoże ci coś wywnioskować Cezary, wielkie dzięki za Ciężką pracę przy tym sofcie i wsparciu dla niego smile

Po wpisaniu ifup wan:

Jan  1 04:09:52 Gargoyle daemon.info pppd[823]: Terminating on signal 15
Jan  1 04:09:52 Gargoyle daemon.info pppd[823]: Exit.
Jan  1 04:09:52 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Jan  1 04:09:52 Gargoyle daemon.info pppd[2406]: Plugin rp-pppoe.so loaded.
Jan  1 04:09:52 Gargoyle daemon.info pppd[2406]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
Jan  1 04:09:52 Gargoyle daemon.notice pppd[2406]: pppd 2.4.5 started by root, uid 0
Jan  1 04:09:52 Gargoyle daemon.info pppd[2406]: Using interface pppoe-wan
Jan  1 04:09:52 Gargoyle daemon.notice pppd[2406]: local  IP address 10.64.64.64
Jan  1 04:09:52 Gargoyle daemon.notice pppd[2406]: remote IP address 10.112.112.112

A tutaj zapis log'u zaraz po starcie urządzenia:

Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.000000] Memory: 28940k/32768k available (2255k kernel code, 3828k reserved, 425k data, 216k init, 0k highmem)
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.000000] NR_IRQS:51
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.080000] pid_max: default: 32768 minimum: 301
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.080000] Mount-cache hash table entries: 512
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.090000] NET: Registered protocol family 16
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.090000] gpiochip_add: registered GPIOs 0 to 21 on device: ath79
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.100000] MIPS: machine is TP-LINK TL-WR1043ND
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.360000] bio: create slab <bio-0> at 0
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.370000] Switching to clocksource MIPS
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.380000] NET: Registered protocol family 2
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.380000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.380000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.390000] TCP: Hash tables configured (established 1024 bind 1024)
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.400000] TCP reno registered
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.400000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.420000] NET: Registered protocol family 1
Jan  1 01:00:39 Gargoyle kern.debug kernel: [    0.420000] PCI: CLS 0 bytes, default 32
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.440000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.450000] msgmni has been set to 56
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.460000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.470000] io scheduler noop registered
Jan  1 01:00:39 Gargoyle kern.info kernel: [    0.470000] io scheduler deadline registered (default)
Jan  1 01:00:39 Gargoyle kern.debug kernel: [   31.600000] ath: EEPROM regdomain: 0x0
Jan  1 01:00:39 Gargoyle kern.debug kernel: [   31.600000] ath: EEPROM indicates default country code should be used
Jan  1 01:00:39 Gargoyle kern.debug kernel: [   31.600000] ath: doing EEPROM country->regdmn map search
Jan  1 01:00:39 Gargoyle kern.debug kernel: [   31.600000] ath: country maps to regdmn code: 0x3a
Jan  1 01:00:39 Gargoyle kern.debug kernel: [   31.600000] ath: Country alpha2 being used: US
Jan  1 01:00:39 Gargoyle kern.debug kernel: [   31.600000] ath: Regpair used: 0x3a
Jan  1 01:00:39 Gargoyle kern.debug kernel: [   31.610000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Jan  1 01:00:39 Gargoyle kern.info kernel: [   31.620000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
Jan  1 01:00:39 Gargoyle kern.info kernel: [   31.630000] cfg80211: Calling CRDA for country: US
Jan  1 01:00:39 Gargoyle kern.info kernel: [   31.630000] cfg80211: Regulatory domain changed to country: US
Jan  1 01:00:39 Gargoyle kern.info kernel: [   31.640000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 01:00:39 Gargoyle kern.info kernel: [   31.640000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:00:39 Gargoyle kern.info kernel: [   31.650000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:00:39 Gargoyle kern.info kernel: [   31.900000] RPC: Registered named UNIX socket transport module.
Jan  1 01:00:39 Gargoyle kern.info kernel: [   31.900000] RPC: Registered udp transport module.
Jan  1 01:00:39 Gargoyle kern.info kernel: [   31.910000] RPC: Registered tcp transport module.
Jan  1 01:00:39 Gargoyle kern.info kernel: [   31.910000] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 01:00:39 Gargoyle kern.info kernel: [   32.500000] PPP generic driver version 2.4.2
Jan  1 01:00:39 Gargoyle kern.info kernel: [   32.650000] tun: Universal TUN/TAP device driver, 1.6
Jan  1 01:00:39 Gargoyle kern.info kernel: [   32.660000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan  1 01:00:39 Gargoyle kern.info kernel: [   32.780000] GRE over IPv4 demultiplexor driver
Jan  1 01:00:39 Gargoyle kern.warn kernel: [   32.800000] ip_gre: Unknown symbol icmpv6_send (err 0)
Jan  1 01:00:39 Gargoyle kern.info kernel: [   33.150000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan  1 01:00:39 Gargoyle kern.info kernel: [   33.260000] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 01:00:39 Gargoyle kern.info kernel: [   33.700000] NET: Registered protocol family 24
Jan  1 01:00:39 Gargoyle kern.info kernel: [   33.860000] nf_conntrack version 0.5.0 (455 buckets, 1820 max)
Jan  1 01:00:39 Gargoyle kern.info kernel: [   34.390000] PPTP driver version 0.8.5
Jan  1 01:00:39 Gargoyle kern.info kernel: [   35.190000] xt_time: kernel timezone is -0000
Jan  1 01:00:39 Gargoyle kern.info kernel: [   36.040000]       Hooked IMQ after mangle on PREROUTING
Jan  1 01:00:39 Gargoyle kern.info kernel: [   36.050000]       Hooked IMQ after nat on POSTROUTING
Jan  1 01:00:39 Gargoyle kern.info kernel: [   36.050000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
Jan  1 01:00:39 Gargoyle kern.info kernel: [   36.240000] Netfilter messages via NETLINK v0.30.
Jan  1 01:00:39 Gargoyle kern.notice kernel: [   36.480000] ip_set: protocol 6
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.130000] usbcore: registered new interface driver cdc_acm
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.130000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.290000] usbcore: registered new interface driver usblp
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.320000] usbcore: registered new interface driver usbserial
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.330000] USB Serial support registered for generic
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.330000] usbcore: registered new interface driver usbserial_generic
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.340000] usbserial: USB Serial Driver core
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.450000] USB Serial support registered for Sierra USB modem
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.450000] usbcore: registered new interface driver sierra
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.460000] sierra: v.1.7.40:USB Driver for Sierra Wireless USB modems
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.480000] usbcore: registered new interface driver sierra_net
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.650000] usbcore: registered new interface driver ums-alauda
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.670000] usbcore: registered new interface driver ums-cypress
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.700000] usbcore: registered new interface driver ums-datafab
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.770000] usbcore: registered new interface driver ums-freecom
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.800000] usbcore: registered new interface driver ums-isd200
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.830000] usbcore: registered new interface driver ums-jumpshot
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.850000] usbcore: registered new interface driver ums-karma
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.880000] usbcore: registered new interface driver ums-sddr09
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.910000] usbcore: registered new interface driver ums-sddr55
Jan  1 01:00:39 Gargoyle kern.info kernel: [   37.940000] usbcore: registered new interface driver ums-usbat
Jan  1 01:00:39 Gargoyle kern.info kernel: [   38.030000] usbcore: registered new interface driver cdc_ether
Jan  1 01:00:39 Gargoyle kern.info kernel: [   38.080000] usbcore: registered new interface driver cdc_ncm
Jan  1 01:00:39 Gargoyle kern.info kernel: [   38.190000] USB Serial support registered for GSM modem (1-port)
Jan  1 01:00:39 Gargoyle kern.info kernel: [   38.200000] usbcore: registered new interface driver option
Jan  1 01:00:39 Gargoyle kern.info kernel: [   38.200000] option: v0.7.2:USB Driver for GSM modems
Jan  1 01:00:39 Gargoyle kern.info kernel: [   38.280000] USB Serial support registered for Qualcomm USB modem
Jan  1 01:00:39 Gargoyle kern.info kernel: [   38.290000] usbcore: registered new interface driver qcserial
Jan  1 01:00:39 Gargoyle kern.info kernel: [   38.450000] fuse init (API version 7.18)
Jan  1 01:00:44 Gargoyle kern.debug kernel: [   44.000000] ar71xx: pll_reg 0xb8050014: 0x1a000000
Jan  1 01:00:44 Gargoyle kern.info kernel: [   44.000000] eth0: link up (1000Mbps/Full duplex)
Jan  1 01:00:44 Gargoyle kern.info kernel: [   44.010000] device eth0.1 entered promiscuous mode
Jan  1 01:00:44 Gargoyle kern.info kernel: [   44.010000] device eth0 entered promiscuous mode
Jan  1 01:00:44 Gargoyle kern.info kernel: [   44.020000] br-lan: port 1(eth0.1) entered forwarding state
Jan  1 01:00:44 Gargoyle kern.info kernel: [   44.030000] br-lan: port 1(eth0.1) entered forwarding state
Jan  1 01:00:44 Gargoyle daemon.notice netifd: Interface 'lan' is now up
Jan  1 01:00:44 Gargoyle daemon.notice netifd: Interface 'loopback' is now up
Jan  1 01:00:45 Gargoyle daemon.info pppd[823]: Plugin rp-pppoe.so loaded.
Jan  1 01:00:45 Gargoyle daemon.info pppd[823]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
Jan  1 01:00:45 Gargoyle daemon.notice pppd[823]: pppd 2.4.5 started by root, uid 0
Jan  1 01:00:45 Gargoyle daemon.info pppd[823]: Using interface pppoe-wan
Jan  1 01:00:45 Gargoyle daemon.notice pppd[823]: local  IP address 10.64.64.64
Jan  1 01:00:45 Gargoyle daemon.notice pppd[823]: remote IP address 10.112.112.112
Jan  1 01:00:46 Gargoyle kern.info kernel: [   46.030000] br-lan: port 1(eth0.1) entered forwarding state
Jan  1 01:00:48 Gargoyle user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
Jan  1 01:00:49 Gargoyle kern.info kernel: [   49.450000] device wlan0 entered promiscuous mode
Jan  1 01:00:49 Gargoyle kern.info kernel: [   49.500000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:00:49 Gargoyle kern.info kernel: [   49.510000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:00:51 Gargoyle kern.info kernel: [   51.510000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 04:00:03 Gargoyle user.info sysinit: Loading defaults
Jan  1 04:00:03 Gargoyle user.info sysinit: Loading synflood protection
Jan  1 04:00:03 Gargoyle user.info sysinit: Adding custom chains
Jan  1 04:00:04 Gargoyle user.info sysinit: Loading zones
Jan  1 04:00:06 Gargoyle user.info sysinit: Loading forwardings
Jan  1 04:00:06 Gargoyle user.info sysinit: Loading rules
Jan  1 04:00:06 Gargoyle user.info sysinit: Loading redirects
Jan  1 04:00:06 Gargoyle user.info sysinit: Loading includes
Jan  1 04:00:08 Gargoyle user.info sysinit: udhcpc (v1.19.4) started
Jan  1 04:00:08 Gargoyle user.info sysinit: Sending discover...
Jan  1 04:00:11 Gargoyle user.info sysinit: Sending discover...
Jan  1 04:00:14 Gargoyle user.info sysinit: Sending discover...
Jan  1 04:00:17 Gargoyle user.info sysinit: No lease, failing
Jan  1 04:00:18 Gargoyle user.info sysinit: Optimizing conntrack
Jan  1 04:00:18 Gargoyle user.info sysinit: Loading interfaces
Jan  1 04:00:18 Gargoyle user.info firewall: adding lan (br-lan) to zone lan
Jan  1 04:00:19 Gargoyle authpriv.info dropbear[1978]: Running in background
Jan  1 04:00:20 Gargoyle daemon.warn httpd_gargoyle[2005]: started as root without requesting chroot(), warning only
Jan  1 04:00:20 Gargoyle daemon.notice httpd_gargoyle[2005]: httpd_gargoyle/1.0 14mar2008 starting on Gargoyle, port 80
Jan  1 04:00:21 Gargoyle user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Jan  1 04:00:21 Gargoyle user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Jan  1 04:00:25 Gargoyle daemon.info dnsmasq[2090]: started, version 2.62 cachesize 150
Jan  1 04:00:25 Gargoyle daemon.info dnsmasq[2090]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Jan  1 04:00:25 Gargoyle daemon.info dnsmasq-dhcp[2090]: DHCP, IP range 192.168.1.2 -- 192.168.1.249, lease time 1d
Jan  1 04:00:25 Gargoyle daemon.info dnsmasq[2090]: using local addresses only for domain lan
Jan  1 04:00:25 Gargoyle daemon.info dnsmasq[2090]: reading /tmp/resolv.conf.auto
Jan  1 04:00:25 Gargoyle daemon.info dnsmasq[2090]: using nameserver 8.8.4.4#53
Jan  1 04:00:25 Gargoyle daemon.info dnsmasq[2090]: using nameserver 8.8.8.8#53
Jan  1 04:00:25 Gargoyle daemon.info dnsmasq[2090]: using local addresses only for domain lan
Jan  1 04:00:25 Gargoyle daemon.info dnsmasq[2090]: read /etc/hosts - 2 addresses
Jan  1 04:00:25 Gargoyle daemon.info dnsmasq-dhcp[2090]: read /etc/ethers - 0 addresses
Jan  1 04:00:26 Gargoyle user.err syslog: error starting threads: errno 89 (Function not implemented)
Jan  1 04:00:26 Gargoyle user.info sysinit: exportfs: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Jan  1 04:00:26 Gargoyle user.info sysinit: exportfs: can't lock /var/lib/nfs/etab for writing
Jan  1 04:00:26 Gargoyle user.info sysinit: exportfs: could not open /var/lib/nfs/.xtab.lock for locking: errno 2 (No such file or directory)
Jan  1 04:00:26 Gargoyle user.info sysinit: exportfs: can't lock /var/lib/nfs/xtab for writing
Jan  1 04:00:28 Gargoyle user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Jan  1 04:00:28 Gargoyle user.info sysinit: (Did you specify correct configuration file path?)
Jan  1 04:00:53 Gargoyle user.notice root: vsftpd init: mounted = 0
Jan  1 04:00:53 Gargoyle user.info sysinit: ERROR: No drives attached, no directories to share!
Jan  1 04:00:54 Gargoyle user.info sysinit: setting up led USB
Jan  1 04:00:54 Gargoyle user.info sysinit: setting up led WLAN
Jan  1 04:06:40 Gargoyle daemon.info hostapd: wlan0: STA 08:11:96:a7:ba:8c IEEE 802.11: authenticated
Jan  1 04:06:40 Gargoyle daemon.info hostapd: wlan0: STA 08:11:96:a7:ba:8c IEEE 802.11: associated (aid 1)
Jan  1 04:06:40 Gargoyle daemon.info hostapd: wlan0: STA 08:11:96:a7:ba:8c IEEE 802.11: authenticated
Jan  1 04:06:40 Gargoyle daemon.info hostapd: wlan0: STA 08:11:96:a7:ba:8c IEEE 802.11: associated (aid 1)
Jan  1 04:06:40 Gargoyle daemon.info dnsmasq-dhcp[2090]: DHCPREQUEST(br-lan) 192.168.1.38 08:11:96:a7:ba:8c

11 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,252

Odp: PPPoE 1043ND

A czy Ty w ogóle na wan dostajesz z dhcp adres ip?

Zrób ifconfig i pokaż wynik

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

12 Odpowiedź przez Uriziel01

  • Zarejestrowany: 2013-06-07
  • Posty: 13

Odp: PPPoE 1043ND

Screen z ifconfiga z pierwszego posta jest nadal aktualny, kompletnie nic sie nie zmieniło od tego czasu.
http://content.screencast.com/users/Pawel.Borecki/folders/Jing/media/c036f1a5-2434-455f-bd57-48d0ba33a943/2013-06-07_0109.png

A po podłączeniu starego routera dostaje on taki adres (jeżeli ma to jakieś znaczenie);

http://content.screencast.com/users/Pawel.Borecki/folders/Jing/media/bdaad80b-a2b5-4ba8-8ae7-64ba85e1f7ca/2013-06-07_1639.png

13 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,252

Odp: PPPoE 1043ND

No to chyba tu jest problem bo na interfejsie wan (eth0.2) nic nie ma.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

14 Odpowiedź przez Uriziel01 (edytowany przez Uriziel01 2013-06-07 15:56:36)

  • Zarejestrowany: 2013-06-07
  • Posty: 13

Odp: PPPoE 1043ND

Aaaaa boże jestem ślepy tongue Dopiero teraz widze że wan jest na eth0.2 a pppoe-wan to kompletnie inny interfejs (swoją droga sory za zły screen w poście wyżej, mój błąd). Może je jakoś zmostkować ? Bo w tej chwili rozumiem że fizycznie wan jest gdzieś niż sądzi system.

EDIT:

Czy dobrze kombinuje że powinienem zmienić nazwe interfejsu w uci ?

network.wan.ifname=eth0.2

na

network.wan.ifname=pppoe-wan

15 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,252

Odp: PPPoE 1043ND

Fizyczny to eth0.2 i właśnie masz tak jak trzeba.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

16 Odpowiedź przez Uriziel01

  • Zarejestrowany: 2013-06-07
  • Posty: 13

Odp: PPPoE 1043ND

Czy powodem tego może być fakt że w trakcie instalacji nie wyłączyłem przewodu z portu wan ? Kompletnie o tym zapomniałem, może miało to jakis wpływ na konfiguracje początkową ? ja juz niestety innych bardziej sensownym pomysłów nie mam.

Może przeinstaluje gargoyle'a ? Jest gdzieś opis jak to bezpiecznie wykonać ?

17 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,252

Odp: PPPoE 1043ND

Wystarczy jak w gui zrobisz przywrócenie ustawień domyślnych. Ale poczekaj do jutrzejszej wersji z tym pppoe

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

18 Odpowiedź przez Uriziel01

  • Zarejestrowany: 2013-06-07
  • Posty: 13

Odp: PPPoE 1043ND

Przywracanie zrobione, niestety nie przyniosło to żadnych rezultatów. Nawet sprawdziłem ifconfig i jest identyczny.
Czy mam jeszcze jakieś opcje ? Mam rozumieć że wersja która wyjdzie jutro ma szanse naprawić problem tego felernego pppoe ?

p.s-Wiem że zrobiłem reset ustawień mimo iż chciałeś zaczekać do jutra, jednak to żaden problem gdyż i tak tych ustawień praktycznie nie było.

19 Odpowiedź przez bhb

  • bhb
  • Użytkownik
  • Nieaktywny
  • Skąd: Włocławek
  • Zarejestrowany: 2012-04-09
  • Posty: 335

Odp: PPPoE 1043ND

Ja mam wprwdzie inną sieć ale po zmianie rotera na inny nieraz przez 30 minut mam podobne adresy potem wskauje ip zewnętrzne. Co Ci szkodzi włącz i zaczekaj.

20 Odpowiedź przez snifer

  • snifer
  • Użytkownik
  • Nieaktywny
  • Skąd: Mikołów
  • Zarejestrowany: 2010-05-26
  • Posty: 268

Odp: PPPoE 1043ND

W konfigu wygląda wszystko dobrze ale może ISP blokuje po macu i daje nierutowalne ip jak się coś nie zgadza.

Archer C7 v.2 + LEDE by Cezary http://beta.speedtest.net/pl/result/6621599402

21 Odpowiedź przez bhb

  • bhb
  • Użytkownik
  • Nieaktywny
  • Skąd: Włocławek
  • Zarejestrowany: 2012-04-09
  • Posty: 335

Odp: PPPoE 1043ND

No właśnie zmień mac.

22 Odpowiedź przez mentor (edytowany przez mentor 2013-06-07 21:24:38)

  • mentor
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-12-22
  • Posty: 11

Odp: PPPoE 1043ND

Mam to samo po aktualizacji do wersji 1.5.10.1 routery TL-WR1043ND i WDR3600 przestały łączyć się z ISP po PPPoE poprzednie aktualizacje przechodziły bez problemów. Wgrałem ponownie wersje factory ale bez rezultatu.

Netgear R6220 | Gargoyle: 1.11.0.4 || TL-WDR3600 | Gargoyle: 1.11.0.3
Jeden z lepszych według mnie hostingów - Atthost

23 Odpowiedź przez etaeta

  • etaeta
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-06-07
  • Posty: 2

Odp: PPPoE 1043ND

Witam,
Ten sam problem od wczoraj (nie miałem czasu na update do 10.1 wczesniej...) Po update sie wysr...
W skrócie info jak przywrócić do działania na PPPoe... może się komuś przyda
1. obraz gargoyle-1.5.10.1-ar71xx-tl-wr1043nd-v1-squashfs-factory.bin
2. Instalacja przez bootloader wg opisu Cezarego (kabel, puciak, tftpd itp itd:))
3. potem i tak jest lipa z PPPoe smile
4. podegrać jakiś backup ustawień i gitara

U mnie działa...W końcu

Ps. Czarek duże piwo dla Ciebie za wparcie do tego sprzetu!!! Czekam na wesje 10.2:)

24 Odpowiedź przez mentor

  • mentor
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-12-22
  • Posty: 11

Odp: PPPoE 1043ND

Pkt. 4 moim zdaniem jest bez sensu przecież każdy pamięta swoje ustawienia PPPoE. A wpisując na piechotę mamy pewność, że są wpisywane prawidłowe dane.

Netgear R6220 | Gargoyle: 1.11.0.4 || TL-WDR3600 | Gargoyle: 1.11.0.3
Jeden z lepszych według mnie hostingów - Atthost

25 Odpowiedź przez etaeta

  • etaeta
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-06-07
  • Posty: 2

Odp: PPPoE 1043ND

Z sensem czy bez sensu ale działa. Innego ratunku nie widziałem... Dałem info jak mi zadziałało a chwile z tym walczyłem. Ręczne wpisywanie nic nie dawało i tak dawało z WAN adres 10.112.112.112 lub ten 10.64.64.64 (nie pamiętam juz). Tak nawiasem... Wpisywałem z palca ze 100razy poprawne ustawienia i ........ Z backupu poszlo
Tyle w temacie...