• Zarejestrowany: 2007-03-23
  • Posty: 48

Temat: gargoyle i extroot

Witam

Panowie. Zaznaczam że czytałem dokumentację o extroot itp. Nie mniej jednak mam problem z automatycznym montowaniem /dev/sda* - gargoyle ich po prostu nie wykrywa:

Mar  8 20:00:34 kuciapa user.notice fstab: mount: mounting /dev/sda1 on /mnt/sda1 failed: No medium found
Mar  8 20:00:35 kuciapa user.notice fstab: mount: mounting /dev/sda2 on /mnt/sda2 failed: No medium found

Zaznaczam że modem nowiutki - kupiony wczoraj, karta microsd nowiutka - kupiona dzisiaj. Raz się tylko udało że zobaczył sda*, ale po reboocie już ma to gdzieś.
Nie wiem czy taki sam problem jest w normalnym opewrt, ale już mnie trafia palpitacja qtasa.

Rozumiem że Czarek przyczynił się do najnowszego gargoyle więc proszę o pomoc smile

Plesken

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,013

Odp: gargoyle i extroot

A po podłączeniu do komputera widzi kartę pamięci i możesz z niej skorzystać?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez plesken

  • Zarejestrowany: 2007-03-23
  • Posty: 48

Odp: gargoyle i extroot

Cezary napisał/a:

A po podłączeniu do komputera widzi kartę pamięci i możesz z niej skorzystać?

Oczywiście że tak. W kompie formatowałem i później sprawdzałem. Zresztą jak się upierasz mogę to zrobić jeszcze raz i zrzucić logi smile

Aha. Gargoyle w dmesgu mówi że wykrywa partycje:

root@kuciapa:~# dmesg|grep sd
[   11.060000] sd 1:0:0:0: [sda] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
[   11.070000] sd 1:0:0:0: [sda] Write Protect is off
[   11.080000] sd 1:0:0:0: [sda] Mode Sense: 0f 00 00 00
[   11.080000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.100000]  sda: sda1 sda2
[   11.110000] sd 1:0:0:0: [sda] Attached SCSI removable disk
[   39.850000] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[   39.850000] sd 1:0:0:0: [sda]  Result: hostbyte=0x01 driverbyte=0x00
[   46.780000] sd 3:0:0:0: [sda] Attached SCSI removable disk
root@kuciapa:~#

Ale:

root@kuciapa:~# ls -la /dev/sda*
brw-r--r--    1 root     root        8,   0 Mar  8 20:00 /dev/sda
root@kuciapa:~#

Dziwna sprawa... Widzi, ale nie widzi. Dotknąć nie dotykajać - paranoja smile

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,013

Odp: gargoyle i extroot

Pokaż cały logread po odłączeniu i podłączeniu modemu.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez plesken (edytowany przez plesken 2013-03-09 20:00:41)

  • Zarejestrowany: 2007-03-23
  • Posty: 48

Odp: gargoyle i extroot

Ok oto wycinki logu które mogą Ciebie zainteresować:

Jan  1 01:00:37 kuciapa kern.info kernel: [   34.980000] usbcore: registered new interface driver cdc_acm
Jan  1 01:00:37 kuciapa kern.info kernel: [   34.990000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.110000] usbcore: registered new interface driver usbserial
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.120000] USB Serial support registered for generic
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.120000] usbcore: registered new interface driver usbserial_generic
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.130000] usbserial: USB Serial Driver core
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.170000] usbcore: registered new interface driver cdc_ether
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.240000] usbcore: registered new interface driver cdc_ncm
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.330000] USB Serial support registered for GSM modem (1-port)
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.340000] usbcore: registered new interface driver option
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.350000] option: v0.7.2:USB Driver for GSM modems
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.450000] USB Serial support registered for Sierra USB modem
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.460000] usbcore: registered new interface driver sierra
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.460000] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
Jan  1 01:00:39 kuciapa user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
Jan  1 01:00:39 kuciapa user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:00:39 kuciapa user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/12d1:14fe for mode switching
Jan  1 01:00:39 kuciapa syslog.notice usb_modeswitch: switching device 12d1:14fe on 001/002
Jan  1 01:00:39 kuciapa kern.info kernel: [   39.880000] usb 1-1: USB disconnect, device number 2
Jan  1 01:00:39 kuciapa kern.notice kernel: [   39.890000] sd 1:0:0:0: [sda] Synchronizing SCSI cache
Jan  1 01:00:39 kuciapa kern.info kernel: [   39.890000] sd 1:0:0:0: [sda]  Result: hostbyte=0x01 driverbyte=0x00
Jan  1 01:00:40 kuciapa daemon.notice netifd: Interface 'lan' is now up
Jan  1 01:00:40 kuciapa kern.info kernel: [   40.680000] device eth1 entered promiscuous mode
Jan  1 01:00:40 kuciapa daemon.notice netifd: Interface 'loopback' is now up
Jan  1 01:00:41 kuciapa daemon.notice netifd: Interface 'wan' is now down
...
Mar  9 16:00:01 kuciapa kern.info kernel: [   45.720000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
Mar  9 16:00:01 kuciapa kern.info kernel: [   45.730000] scsi2 : usb-storage 1-1:1.4
Mar  9 16:00:01 kuciapa kern.info kernel: [   45.730000] scsi3 : usb-storage 1-1:1.5
Mar  9 16:00:02 kuciapa kern.notice kernel: [   46.790000] scsi 3:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
Mar  9 16:00:02 kuciapa kern.notice kernel: [   46.800000] scsi 2:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Mar  9 16:00:02 kuciapa kern.notice kernel: [   46.810000] sd 3:0:0:0: [sda] Attached SCSI removable disk
Mar  9 16:00:02 kuciapa user.info sysinit: Loading defaults
...
Mar  9 16:00:30 kuciapa user.notice ifup: Enabling Router Solicitations on loopback (lo)
Mar  9 16:00:35 kuciapa user.notice fstab: mount: mounting /dev/sda1 on /mnt/sda1 failed: No medium found
Mar  9 16:00:35 kuciapa user.notice fstab: mount: mounting /dev/sda2 on /mnt/sda2 failed: No medium found
Mar  9 16:00:39 kuciapa user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar  9 16:00:42 kuciapa user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar  9 16:00:42 kuciapa user.notice usb-modeswitch: 1-1:1.2: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar  9 16:00:42 kuciapa user.notice usb-modeswitch: 1-1:1.3: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar  9 16:00:42 kuciapa user.notice usb-modeswitch: 1-1:1.4: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar  9 16:00:42 kuciapa user.notice usb-modeswitch: 1-1:1.5: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar  9 16:00:45 kuciapa daemon.notice pppd[2253]: pppd 2.4.5 started by root, uid 0
Mar  9 16:00:46 kuciapa local2.info chat[2257]: abort on (BUSY)

Nie widzę tutaj nic co by mi mogło powiedzieć dlaczego nie widzi sda1 i sda2 widząc urządzenie sda. Jak wspomniałem dmesg widzi urządzenie sda: <sda1> <sda2>, także o co cho?

Jedno pytanie bo się pogubiłem. Jaki typ partycji powinien być? ext2,ext3,ext4? Gdzieś czytałem że obojętne, gdzieś że ext2, a jeszcze w innym miejscu ext3 - więc sorki zgłupiałem...

A propo logu to mogę zamieścić cały, ale nie chciałem śmiecić.

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,013

Odp: gargoyle i extroot

Nie chciałem wycinków. Cały po podłączeniu.

Zrób head -c 16 /dev/sda; blkid i pewnie zobaczysz partycję. Przełącz modem na stałe żeby zrobić extroota. A jeżeli modem będzie wymagał takiego pobudzenia żeby partycję się pojawiły to będziesz miał problem.

System plików jaki chcesz w sumie, jak wolisz. Choć ze względu na wytrzymałość karty lepiej żeby to być ext2 lub ext4 bez kroniki.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez plesken

  • Zarejestrowany: 2007-03-23
  • Posty: 48

Odp: gargoyle i extroot

Cezary napisał/a:

Nie chciałem wycinków. Cały po podłączeniu.

Zrób head -c 16 /dev/sda; blkid i pewnie zobaczysz partycję. Przełącz modem na stałe żeby zrobić extroota. A jeżeli modem będzie wymagał takiego pobudzenia żeby partycję się pojawiły to będziesz miał problem.

System plików jaki chcesz w sumie, jak wolisz. Choć ze względu na wytrzymałość karty lepiej żeby to być ext2 lub ext4 bez kroniki.

logread jaki zdołałem zebrać:

Jan  1 01:00:36 kuciapa kern.warn kernel: [    0.000000] Movable zone start PFN for each node
Jan  1 01:00:36 kuciapa kern.warn kernel: [    0.000000] Early memory PFN ranges
Jan  1 01:00:36 kuciapa kern.warn kernel: [    0.000000]     0: 0x00000000 -> 0x00002000
Jan  1 01:00:36 kuciapa kern.debug kernel: [    0.000000] On node 0 totalpages: 8192
Jan  1 01:00:36 kuciapa kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 802f5cd0, node_mem_map 81000000
Jan  1 01:00:36 kuciapa kern.debug kernel: [    0.000000]   Normal zone: 64 pages used for memmap
Jan  1 01:00:36 kuciapa kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Jan  1 01:00:36 kuciapa kern.debug kernel: [    0.000000]   Normal zone: 8128 pages, LIFO batch:0
Jan  1 01:00:36 kuciapa kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jan  1 01:00:36 kuciapa kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Jan  1 01:00:36 kuciapa kern.warn kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Jan  1 01:00:36 kuciapa kern.notice kernel: [    0.000000] Kernel command line:  board=TL-WR841N-v8 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 01:00:36 kuciapa kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Jan  1 01:00:36 kuciapa kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.000000] Memory: 28976k/32768k available (2227k kernel code, 3792k reserved, 421k data, 216k init, 0k highmem)
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.000000] NR_IRQS:51
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.000000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.080000] pid_max: default: 32768 minimum: 301
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.080000] Mount-cache hash table entries: 512
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.090000] NET: Registered protocol family 16
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.090000] gpiochip_add: registered GPIOs 0 to 22 on device: ath79
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.100000] MIPS: machine is TP-LINK TL-MR3420 v2 | TL-WR841N/ND v8
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.520000] bio: create slab <bio-0> at 0
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.520000] Switching to clocksource MIPS
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.530000] NET: Registered protocol family 2
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.530000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.540000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.550000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.550000] TCP: Hash tables configured (established 1024 bind 1024)
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.560000] TCP reno registered
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.560000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.570000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.570000] NET: Registered protocol family 1
Jan  1 01:00:36 kuciapa kern.debug kernel: [    0.580000] PCI: CLS 0 bytes, default 32
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.590000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.600000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.610000] msgmni has been set to 56
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.610000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.620000] io scheduler noop registered
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.630000] io scheduler deadline registered (default)
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.630000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.660000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.670000] console [ttyS0] enabled, bootconsole disabled
Jan  1 01:00:36 kuciapa kern.warn kernel: [    0.680000] m25p80 spi0.0: found s25sl032a, expected m25p80
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.690000] m25p80 spi0.0: s25sl032a (4096 Kbytes)
Jan  1 01:00:36 kuciapa kern.notice kernel: [    0.690000] 5 tp-link partitions found on MTD device spi0.0
Jan  1 01:00:36 kuciapa kern.notice kernel: [    0.700000] Creating 5 MTD partitions on "spi0.0":
Jan  1 01:00:36 kuciapa kern.notice kernel: [    0.710000] 0x000000000000-0x000000020000 : "u-boot"
Jan  1 01:00:36 kuciapa kern.notice kernel: [    0.710000] 0x000000020000-0x00000010bb44 : "kernel"
Jan  1 01:00:36 kuciapa kern.warn kernel: [    0.720000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Jan  1 01:00:36 kuciapa kern.notice kernel: [    0.730000] 0x00000010bb44-0x0000003f0000 : "rootfs"
Jan  1 01:00:36 kuciapa kern.warn kernel: [    0.740000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Jan  1 01:00:36 kuciapa kern.notice kernel: [    0.750000] mtd: partition "rootfs" set to be root filesystem
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.760000] mtd: partition "rootfs_data" created automatically, ofs=3A0000, len=50000 
Jan  1 01:00:36 kuciapa kern.notice kernel: [    0.770000] 0x0000003a0000-0x0000003f0000 : "rootfs_data"
Jan  1 01:00:36 kuciapa kern.notice kernel: [    0.770000] 0x0000003f0000-0x000000400000 : "art"
Jan  1 01:00:36 kuciapa kern.notice kernel: [    0.780000] 0x000000020000-0x0000003f0000 : "firmware"
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.810000] ag71xx_mdio: probed
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.810000] eth0: Atheros AG71xx at 0xb9000000, irq 4
Jan  1 01:00:36 kuciapa kern.info kernel: [    1.370000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
Jan  1 01:00:36 kuciapa kern.info kernel: [    1.380000] eth1: Atheros AG71xx at 0xba000000, irq 5
Jan  1 01:00:36 kuciapa kern.info kernel: [    1.930000] eth1: Found an AR934X built-in switch
Jan  1 01:00:36 kuciapa kern.info kernel: [    2.970000] TCP cubic registered
Jan  1 01:00:36 kuciapa kern.info kernel: [    2.970000] NET: Registered protocol family 17
Jan  1 01:00:36 kuciapa kern.info kernel: [   32.410000] NET: Registered protocol family 24
Jan  1 01:00:36 kuciapa kern.info kernel: [   32.540000] nf_conntrack version 0.5.0 (456 buckets, 1824 max)
Jan  1 01:00:37 kuciapa kern.info kernel: [   32.870000] PPTP driver version 0.8.5
Jan  1 01:00:37 kuciapa kern.info kernel: [   33.480000] xt_time: kernel timezone is -0000
Jan  1 01:00:37 kuciapa kern.info kernel: [   34.190000]     Hooked IMQ after mangle on PREROUTING
Jan  1 01:00:37 kuciapa kern.info kernel: [   34.200000]     Hooked IMQ after nat on POSTROUTING
Jan  1 01:00:37 kuciapa kern.info kernel: [   34.200000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
Jan  1 01:00:37 kuciapa kern.info kernel: [   34.380000] Netfilter messages via NETLINK v0.30.
Jan  1 01:00:37 kuciapa kern.notice kernel: [   34.440000] ip_set: protocol 6
Jan  1 01:00:37 kuciapa kern.info kernel: [   34.980000] usbcore: registered new interface driver cdc_acm
Jan  1 01:00:37 kuciapa kern.info kernel: [   34.990000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.110000] usbcore: registered new interface driver usbserial
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.120000] USB Serial support registered for generic
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.120000] usbcore: registered new interface driver usbserial_generic
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.130000] usbserial: USB Serial Driver core
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.170000] usbcore: registered new interface driver cdc_ether
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.240000] usbcore: registered new interface driver cdc_ncm
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.330000] USB Serial support registered for GSM modem (1-port)
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.340000] usbcore: registered new interface driver option
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.350000] option: v0.7.2:USB Driver for GSM modems
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.450000] USB Serial support registered for Sierra USB modem
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.460000] usbcore: registered new interface driver sierra
Jan  1 01:00:37 kuciapa kern.info kernel: [   35.460000] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
Jan  1 01:00:39 kuciapa user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
Jan  1 01:00:39 kuciapa user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:00:39 kuciapa user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/12d1:14fe for mode switching
Jan  1 01:00:39 kuciapa syslog.notice usb_modeswitch: switching device 12d1:14fe on 001/002
Jan  1 01:00:39 kuciapa kern.info kernel: [   39.880000] usb 1-1: USB disconnect, device number 2
Jan  1 01:00:39 kuciapa kern.notice kernel: [   39.890000] sd 1:0:0:0: [sda] Synchronizing SCSI cache
Jan  1 01:00:39 kuciapa kern.info kernel: [   39.890000] sd 1:0:0:0: [sda]  Result: hostbyte=0x01 driverbyte=0x00
Jan  1 01:00:40 kuciapa daemon.notice netifd: Interface 'lan' is now up
Jan  1 01:00:40 kuciapa kern.info kernel: [   40.680000] device eth1 entered promiscuous mode
Jan  1 01:00:40 kuciapa daemon.notice netifd: Interface 'loopback' is now up
Jan  1 01:00:41 kuciapa daemon.notice netifd: Interface 'wan' is now down
Jan  1 01:00:41 kuciapa kern.info kernel: [   41.280000] eth1: link up (1000Mbps/Full duplex)
Jan  1 01:00:41 kuciapa kern.info kernel: [   41.280000] br-lan: port 1(eth1) entered forwarding state
Jan  1 01:00:41 kuciapa kern.info kernel: [   41.290000] br-lan: port 1(eth1) entered forwarding state
Jan  1 01:00:41 kuciapa user.notice ifup: Enabling Router Solicitations on lan (br-lan)
Jan  1 01:00:43 kuciapa kern.info kernel: [   43.290000] br-lan: port 1(eth1) entered forwarding state
Mar  9 16:00:01 kuciapa kern.info kernel: [   45.470000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Mar  9 16:00:01 kuciapa kern.info kernel: [   45.660000] option 1-1:1.0: GSM modem (1-port) converter detected
Mar  9 16:00:01 kuciapa kern.info kernel: [   45.670000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Mar  9 16:00:01 kuciapa kern.info kernel: [   45.680000] usb 1-1: MAC-Address: 0x58:0x2c:0x80:0x13:0x92:0x63
Mar  9 16:00:01 kuciapa kern.info kernel: [   45.680000] cdc_ncm 1-1:1.1: wwan0: register 'cdc_ncm' at usb-ehci-platform-1, Mobile Broadband Network Device, 58:2c:80:13:92:63
Mar  9 16:00:01 kuciapa kern.info kernel: [   45.700000] option 1-1:1.2: GSM modem (1-port) converter detected
Mar  9 16:00:01 kuciapa kern.info kernel: [   45.700000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Mar  9 16:00:01 kuciapa kern.info kernel: [   45.710000] option 1-1:1.3: GSM modem (1-port) converter detected
Mar  9 16:00:01 kuciapa kern.info kernel: [   45.720000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
Mar  9 16:00:01 kuciapa kern.info kernel: [   45.730000] scsi2 : usb-storage 1-1:1.4
Mar  9 16:00:01 kuciapa kern.info kernel: [   45.730000] scsi3 : usb-storage 1-1:1.5
Mar  9 16:00:02 kuciapa kern.notice kernel: [   46.790000] scsi 3:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
Mar  9 16:00:02 kuciapa kern.notice kernel: [   46.800000] scsi 2:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Mar  9 16:00:02 kuciapa kern.notice kernel: [   46.810000] sd 3:0:0:0: [sda] Attached SCSI removable disk
Mar  9 16:00:02 kuciapa user.info sysinit: Loading defaults
Mar  9 16:00:03 kuciapa user.info sysinit: Loading synflood protection
Mar  9 16:00:03 kuciapa user.info sysinit: Adding custom chains
Mar  9 16:00:03 kuciapa user.info sysinit: Loading zones
Mar  9 16:00:04 kuciapa user.info sysinit: Loading forwardings
Mar  9 16:00:04 kuciapa user.info sysinit: Loading rules
Mar  9 16:00:04 kuciapa user.info sysinit: Loading redirects
Mar  9 16:00:04 kuciapa user.info sysinit: Loading includes
Mar  9 16:00:05 kuciapa user.info sysinit: Optimizing conntrack
Mar  9 16:00:05 kuciapa user.info sysinit: Loading interfaces
Mar  9 16:00:05 kuciapa user.info firewall: adding lan (br-lan) to zone lan
Mar  9 16:00:06 kuciapa authpriv.info dropbear[1223]: Running in background
Mar  9 16:00:07 kuciapa daemon.warn httpd_gargoyle[1248]: started as root without requesting chroot(), warning only
Mar  9 16:00:07 kuciapa daemon.notice httpd_gargoyle[1248]: httpd_gargoyle/1.0 14mar2008 starting on kuciapa, port 80
Mar  9 16:00:07 kuciapa authpriv.info dropbear[1260]: Child connection from 192.168.254.13:53413
Mar  9 16:00:07 kuciapa user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Mar  9 16:00:07 kuciapa user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Mar  9 16:00:09 kuciapa user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override
Mar  9 16:00:09 kuciapa daemon.info dnsmasq[1281]: started, version 2.62 cachesize 150
Mar  9 16:00:09 kuciapa daemon.info dnsmasq[1281]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Mar  9 16:00:09 kuciapa daemon.info dnsmasq[1281]: using local addresses only for domain lan
Mar  9 16:00:09 kuciapa daemon.info dnsmasq[1281]: reading /tmp/resolv.conf.auto
Mar  9 16:00:09 kuciapa daemon.warn dnsmasq[1281]: ignoring nameserver 192.168.254.2 - local interface
Mar  9 16:00:09 kuciapa daemon.info dnsmasq[1281]: using local addresses only for domain lan
Mar  9 16:00:09 kuciapa daemon.info dnsmasq[1281]: read /etc/hosts - 3 addresses
Mar  9 16:00:09 kuciapa user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Mar  9 16:00:09 kuciapa user.info sysinit: (Did you specify correct configuration file path?)
Mar  9 16:00:10 kuciapa user.info sysinit: setting up led WAN
Mar  9 16:00:10 kuciapa user.info sysinit: setting up led LAN1
Mar  9 16:00:10 kuciapa user.info sysinit: setting up led LAN2
Mar  9 16:00:10 kuciapa user.info sysinit: setting up led LAN3
Mar  9 16:00:10 kuciapa user.info sysinit: setting up led LAN4
Mar  9 16:00:10 kuciapa user.info sysinit: setting up led WLAN
Mar  9 16:00:15 kuciapa authpriv.notice dropbear[1260]: Password auth succeeded for 'root' from 192.168.254.13:53413
Mar  9 16:00:29 kuciapa user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar  9 16:00:30 kuciapa user.notice ifup: Enabling Router Solicitations on loopback (lo)
Mar  9 16:00:30 kuciapa user.notice ifup: Enabling Router Solicitations on loopback (lo)
Mar  9 16:00:35 kuciapa user.notice fstab: mount: mounting /dev/sda1 on /mnt/sda1 failed: No medium found
Mar  9 16:00:35 kuciapa user.notice fstab: mount: mounting /dev/sda2 on /mnt/sda2 failed: No medium found
Mar  9 16:00:39 kuciapa user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar  9 16:00:42 kuciapa user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar  9 16:00:42 kuciapa user.notice usb-modeswitch: 1-1:1.2: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar  9 16:00:42 kuciapa user.notice usb-modeswitch: 1-1:1.3: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar  9 16:00:42 kuciapa user.notice usb-modeswitch: 1-1:1.4: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar  9 16:00:42 kuciapa user.notice usb-modeswitch: 1-1:1.5: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar  9 16:00:45 kuciapa daemon.notice pppd[2253]: pppd 2.4.5 started by root, uid 0
Mar  9 16:00:46 kuciapa local2.info chat[2257]: abort on (BUSY)
Mar  9 16:00:46 kuciapa local2.info chat[2257]: abort on (NO CARRIER)
Mar  9 16:00:46 kuciapa local2.info chat[2257]: abort on (ERROR)
Mar  9 16:00:46 kuciapa local2.info chat[2257]: report (CONNECT)
Mar  9 16:00:46 kuciapa local2.info chat[2257]: timeout set to 10 seconds
Mar  9 16:00:46 kuciapa local2.info chat[2257]: send (AT&F^M)
Mar  9 16:00:46 kuciapa local2.info chat[2257]: expect (OK)
Mar  9 16:00:46 kuciapa local2.info chat[2257]: AT&F^M^M
Mar  9 16:00:46 kuciapa local2.info chat[2257]: OK
Mar  9 16:00:46 kuciapa local2.info chat[2257]:  -- got it
Mar  9 16:00:46 kuciapa local2.info chat[2257]: send (ATE1^M)
Mar  9 16:00:47 kuciapa local2.info chat[2257]: expect (OK)
Mar  9 16:00:47 kuciapa local2.info chat[2257]: ^M
Mar  9 16:00:47 kuciapa local2.info chat[2257]: ATE1^M^M
Mar  9 16:00:47 kuciapa local2.info chat[2257]: OK
Mar  9 16:00:47 kuciapa local2.info chat[2257]:  -- got it
Mar  9 16:00:47 kuciapa local2.info chat[2257]: send (AT+CGDCONT=1,"IP","darmowy"^M)
Mar  9 16:00:47 kuciapa local2.info chat[2257]: timeout set to 30 seconds
Mar  9 16:00:47 kuciapa local2.info chat[2257]: expect (OK)
Mar  9 16:00:47 kuciapa local2.info chat[2257]: ^M
Mar  9 16:00:47 kuciapa local2.info chat[2257]: AT+CGDCONT=1,"IP","darmowy"^M^M
Mar  9 16:00:47 kuciapa local2.info chat[2257]: OK
Mar  9 16:00:47 kuciapa local2.info chat[2257]:  -- got it
Mar  9 16:00:47 kuciapa local2.info chat[2257]: send (ATD*99***1#^M)
Mar  9 16:00:47 kuciapa local2.info chat[2257]: expect (CONNECT)
Mar  9 16:00:47 kuciapa local2.info chat[2257]: ^M
Mar  9 16:00:47 kuciapa local2.info chat[2257]: ATD*99***1#^M^M
Mar  9 16:00:47 kuciapa local2.info chat[2257]: CONNECT
Mar  9 16:00:47 kuciapa local2.info chat[2257]:  -- got it
Mar  9 16:00:47 kuciapa local2.info chat[2257]: send ( ^M)
Mar  9 16:00:47 kuciapa daemon.info pppd[2253]: Serial connection established.
Mar  9 16:00:47 kuciapa daemon.info pppd[2253]: Using interface 3g-wan
Mar  9 16:00:47 kuciapa daemon.notice pppd[2253]: Connect: 3g-wan <--> /dev/ttyUSB0
Mar  9 16:00:52 kuciapa daemon.notice pppd[2253]: Modem hangup
Mar  9 16:00:52 kuciapa daemon.notice pppd[2253]: Connection terminated.
Mar  9 16:00:53 kuciapa daemon.info pppd[2253]: Exit.
Mar  9 16:00:53 kuciapa daemon.notice netifd: Interface 'wan' is now down
Mar  9 16:00:55 kuciapa daemon.info dnsmasq[1281]: reading /tmp/resolv.conf.auto
Mar  9 16:00:55 kuciapa daemon.warn dnsmasq[1281]: ignoring nameserver 192.168.254.2 - local interface
Mar  9 16:00:55 kuciapa daemon.info dnsmasq[1281]: using local addresses only for domain lan
Mar  9 16:00:57 kuciapa daemon.notice pppd[2414]: pppd 2.4.5 started by root, uid 0
Success

Zrobiłem to co napisałeś w poprzednim poście

root@kuciapa:~# ls -la /dev/sda*
brw-r--r--    1 root     root        8,   0 Mar  9 16:00 /dev/sda
root@kuciapa:~# head -c 16 /dev/sda
head: /dev/sda: No medium found
root@kuciapa:~# blkid 
root@kuciapa:~#

blkid właściwie nie potrzebowałem odpalać po tym jak head nie znalazł urządzenia.
Wygląda na to że urządzenie sda na starcie jest a później znika. Znalazłem Twój post:

AKTUALIZACJA #3: przełączenie modemu w tryb... modemu
UWAGA: nie rób tego jeżeli nie wiesz o co chodzi. Możesz uszkodzić modem.
Szybka teoria: zwykły modem składa się zwykle z trzech elementów: wirtualnego CDROMu, modemu i karty pamięci. Po podłączeniu modemu (obojętnie czy Windows czy Linux), widoczny jest tylko wirtualny CDROM i czasami karta pamięci. Odpowiednie programy (sterownik pod windows lub usb-modeswitch pod linuksem) przełączają później urządzenie żeby był dostępny właśnie modem i karta pamięci. Wadą tej czynności jest zwykle to że karta pamięci na czas przełączenia przestaje być widoczna, co powoduje że nie nadaje się na extroota bo powoduje to błędy w systemie plików. Trzeba więc modem tak skonfigurować, żeby był na stałe przełączony, bez potrzeby wykonywania tej czynności. Do tego niezbędne jest odpowiednie polecenie które modem przełączy - zobacz http://3g-modem.wetpaint.com/page/Huawei+AT-commands . Dla Huawei E173 jest to AT^U2DIAG=256, dla innych modemów tego producenta może być inne (^SETPORT).

Może tego powinienem spróbować? Kurde dziwne to... Modem to Huawei 3131 s2

8 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,013

Odp: gargoyle i extroot

E3131u-2 nie obsługuje u2diag, a setport nie powoduje jego przełączenia. Jak jest na e3131s-2 to sprawdź.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

9 Odpowiedź przez plesken

  • Zarejestrowany: 2007-03-23
  • Posty: 48

Odp: gargoyle i extroot

Właśnie sprawdziłem na pudełku i tam jest napisane HUAWEI E3131. To "s-2" podałem bo sprzedawca tak mówił i tym się sugerowałem. Czyli teraz już zgłupiałem. Nie ma "lspci", nie ma "udevinfo" więc nie wiem gdzie w gargoyle zajrzeć na szybko aby sprawdzić jaki to model sad

10 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,013

Odp: gargoyle i extroot

Pod klapką obok sim jest napisane.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

11 Odpowiedź przez plesken

  • Zarejestrowany: 2007-03-23
  • Posty: 48

Odp: gargoyle i extroot

Jest napisaneE3131 smile.

Napisałeś też w wątku dotyczącym E3131 i MR-3420:

Przecież e3131 ma inny identyfikator pid!

Po er_load_modules sobie dodaj

/bin/mount -t usbfs none /proc/bus/usb
sleep 5
/usr/bin/usb_modeswitch -v 12d1 -p 14fe -c /etc/usb_modeswitch.d/12d1:14fe

czyli w tym kawałku logu:

Jan  1 01:00:39 kuciapa user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/12d1:14fe for mode switching
Jan  1 01:00:39 kuciapa syslog.notice usb_modeswitch: switching device 12d1:14fe on 001/002

się przełącza tak?

12 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,013

Odp: gargoyle i extroot

No każdy modem sie przełącza. Tylko u ciebie jest to 35 sekunda. Czyli dawno po starcie systemu i zrobienia overlaya. Na eko.one.pl masz link do do mojego skryptu od E3131

Nie na naklejce tylko na obudowie w plastiku. Tam gdzie sim się wkłada.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

13 Odpowiedź przez plesken (edytowany przez plesken 2013-03-09 21:50:23)

  • Zarejestrowany: 2007-03-23
  • Posty: 48

Odp: gargoyle i extroot

Nic z tego nie rozumiem. Zrobiłem tak jak opisywałeś w http://eko.one.pl/forum/viewtopic.php?id=5405 stosując się też do http://eko.one.pl/forum/viewtopic.php?pid=21214#p21214

W logu tym razem nie mam nic o montowaniu sda:

Jan  1 01:01:29 kuciapa kern.warn kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Jan  1 01:01:29 kuciapa kern.notice kernel: [    0.000000] Kernel command line:  board=TL-WR841N-v8 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 01:01:29 kuciapa kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Jan  1 01:01:29 kuciapa kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.000000] Memory: 28976k/32768k available (2227k kernel code, 3792k reserved, 421k data, 216k init, 0k highmem)
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.000000] NR_IRQS:51
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.000000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.080000] pid_max: default: 32768 minimum: 301
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.080000] Mount-cache hash table entries: 512
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.090000] NET: Registered protocol family 16
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.090000] gpiochip_add: registered GPIOs 0 to 22 on device: ath79
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.100000] MIPS: machine is TP-LINK TL-MR3420 v2 | TL-WR841N/ND v8
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.520000] bio: create slab <bio-0> at 0
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.520000] Switching to clocksource MIPS
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.530000] NET: Registered protocol family 2
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.530000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.540000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.550000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.550000] TCP: Hash tables configured (established 1024 bind 1024)
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.560000] TCP reno registered
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.560000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.570000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.570000] NET: Registered protocol family 1
Jan  1 01:01:29 kuciapa kern.debug kernel: [    0.580000] PCI: CLS 0 bytes, default 32
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.590000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.600000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.610000] msgmni has been set to 56
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.610000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.620000] io scheduler noop registered
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.630000] io scheduler deadline registered (default)
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.630000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.660000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.670000] console [ttyS0] enabled, bootconsole disabled
Jan  1 01:01:29 kuciapa kern.warn kernel: [    0.680000] m25p80 spi0.0: found s25sl032a, expected m25p80
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.690000] m25p80 spi0.0: s25sl032a (4096 Kbytes)
Jan  1 01:01:29 kuciapa kern.notice kernel: [    0.690000] 5 tp-link partitions found on MTD device spi0.0
Jan  1 01:01:29 kuciapa kern.notice kernel: [    0.700000] Creating 5 MTD partitions on "spi0.0":
Jan  1 01:01:29 kuciapa kern.notice kernel: [    0.710000] 0x000000000000-0x000000020000 : "u-boot"
Jan  1 01:01:29 kuciapa kern.notice kernel: [    0.710000] 0x000000020000-0x00000010bb44 : "kernel"
Jan  1 01:01:29 kuciapa kern.warn kernel: [    0.720000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Jan  1 01:01:29 kuciapa kern.notice kernel: [    0.730000] 0x00000010bb44-0x0000003f0000 : "rootfs"
Jan  1 01:01:29 kuciapa kern.warn kernel: [    0.740000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Jan  1 01:01:29 kuciapa kern.notice kernel: [    0.750000] mtd: partition "rootfs" set to be root filesystem
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.760000] mtd: partition "rootfs_data" created automatically, ofs=3A0000, len=50000 
Jan  1 01:01:29 kuciapa kern.notice kernel: [    0.770000] 0x0000003a0000-0x0000003f0000 : "rootfs_data"
Jan  1 01:01:29 kuciapa kern.notice kernel: [    0.770000] 0x0000003f0000-0x000000400000 : "art"
Jan  1 01:01:29 kuciapa kern.notice kernel: [    0.780000] 0x000000020000-0x0000003f0000 : "firmware"
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.810000] ag71xx_mdio: probed
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.810000] eth0: Atheros AG71xx at 0xb9000000, irq 4
Jan  1 01:01:29 kuciapa kern.info kernel: [    1.370000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
Jan  1 01:01:29 kuciapa kern.info kernel: [    1.380000] eth1: Atheros AG71xx at 0xba000000, irq 5
Jan  1 01:01:29 kuciapa kern.info kernel: [    1.930000] eth1: Found an AR934X built-in switch
Jan  1 01:01:29 kuciapa kern.info kernel: [    2.970000] TCP cubic registered
Jan  1 01:01:29 kuciapa kern.info kernel: [    2.970000] NET: Registered protocol family 17
Jan  1 01:01:29 kuciapa kern.info kernel: [   84.490000] cfg80211: Calling CRDA for country: US
Jan  1 01:01:30 kuciapa kern.info kernel: [   84.490000] cfg80211: Regulatory domain changed to country: US
Jan  1 01:01:30 kuciapa kern.info kernel: [   84.500000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 01:01:30 kuciapa kern.info kernel: [   84.500000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:01:30 kuciapa kern.info kernel: [   84.510000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:01:30 kuciapa kern.info kernel: [   84.710000] PPP generic driver version 2.4.2
Jan  1 01:01:30 kuciapa kern.info kernel: [   84.740000] tun: Universal TUN/TAP device driver, 1.6
Jan  1 01:01:30 kuciapa kern.info kernel: [   84.750000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan  1 01:01:30 kuciapa kern.info kernel: [   84.840000] GRE over IPv4 demultiplexor driver
Jan  1 01:01:30 kuciapa kern.warn kernel: [   84.860000] ip_gre: Unknown symbol icmpv6_send (err 0)
Jan  1 01:01:30 kuciapa kern.info kernel: [   84.970000] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 01:01:30 kuciapa kern.info kernel: [   85.440000] NET: Registered protocol family 24
Jan  1 01:01:32 kuciapa user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
Jan  1 01:01:32 kuciapa user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:33 kuciapa user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:33 kuciapa user.notice usb-modeswitch: 1-1:1.2: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:33 kuciapa user.notice usb-modeswitch: 1-1:1.3: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:33 kuciapa user.notice usb-modeswitch: 1-1:1.4: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:33 kuciapa user.notice usb-modeswitch: 1-1:1.5: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:34 kuciapa daemon.notice netifd: Interface 'lan' is now up
Jan  1 01:01:34 kuciapa kern.info kernel: [   94.280000] device eth1 entered promiscuous mode
Jan  1 01:01:34 kuciapa daemon.notice netifd: Interface 'loopback' is now up
Jan  1 01:01:34 kuciapa kern.info kernel: [   94.880000] eth1: link up (1000Mbps/Full duplex)
Jan  1 01:01:34 kuciapa kern.info kernel: [   94.880000] br-lan: port 1(eth1) entered forwarding state
Jan  1 01:01:34 kuciapa kern.info kernel: [   94.890000] br-lan: port 1(eth1) entered forwarding state
Jan  1 01:01:35 kuciapa user.notice ifup: Enabling Router Solicitations on lan (br-lan)
Jan  1 01:01:36 kuciapa kern.info kernel: [   96.890000] br-lan: port 1(eth1) entered forwarding state
Jan  1 01:01:38 kuciapa daemon.notice pppd[1212]: pppd 2.4.5 started by root, uid 0
Mar  9 20:00:01 kuciapa local2.info chat[1292]: abort on (BUSY)
Mar  9 20:00:01 kuciapa local2.info chat[1292]: abort on (NO CARRIER)
Mar  9 20:00:01 kuciapa local2.info chat[1292]: abort on (ERROR)
Mar  9 20:00:01 kuciapa local2.info chat[1292]: report (CONNECT)
Mar  9 20:00:01 kuciapa local2.info chat[1292]: timeout set to 10 seconds
Mar  9 20:00:01 kuciapa local2.info chat[1292]: send (AT&F^M)
Mar  9 20:00:01 kuciapa local2.info chat[1292]: expect (OK)
Mar  9 20:00:01 kuciapa local2.info chat[1292]: AT&F^M^M
Mar  9 20:00:01 kuciapa local2.info chat[1292]: OK
Mar  9 20:00:01 kuciapa local2.info chat[1292]:  -- got it
Mar  9 20:00:01 kuciapa local2.info chat[1292]: send (ATE1^M)
Mar  9 20:00:01 kuciapa local2.info chat[1292]: expect (OK)
Mar  9 20:00:01 kuciapa local2.info chat[1292]: ^M
Mar  9 20:00:01 kuciapa local2.info chat[1292]: ATE1^M^M
Mar  9 20:00:01 kuciapa local2.info chat[1292]: OK
Mar  9 20:00:01 kuciapa local2.info chat[1292]:  -- got it
Mar  9 20:00:01 kuciapa local2.info chat[1292]: send (AT+CGDCONT=1,"IP","darmowy"^M)
Mar  9 20:00:02 kuciapa user.info sysinit: mount: mounting none on /proc/bus/usb failed: Device or resource busy
Mar  9 20:00:02 kuciapa local2.info chat[1292]: timeout set to 30 seconds
Mar  9 20:00:02 kuciapa local2.info chat[1292]: expect (OK)
Mar  9 20:00:02 kuciapa local2.info chat[1292]: ^M
Mar  9 20:00:02 kuciapa local2.info chat[1292]: AT+CGDCONT=1,"IP","darmowy"^M^M
Mar  9 20:00:02 kuciapa local2.info chat[1292]: OK
Mar  9 20:00:02 kuciapa local2.info chat[1292]:  -- got it
Mar  9 20:00:02 kuciapa local2.info chat[1292]: send (ATD*99***1#^M)
Mar  9 20:00:02 kuciapa local2.info chat[1292]: expect (CONNECT)
Mar  9 20:00:02 kuciapa local2.info chat[1292]: ^M
Mar  9 20:00:02 kuciapa local2.info chat[1292]: ATD*99***1#^M^M
Mar  9 20:00:02 kuciapa local2.info chat[1292]: CONNECT
Mar  9 20:00:02 kuciapa local2.info chat[1292]:  -- got it
Mar  9 20:00:02 kuciapa local2.info chat[1292]: send ( ^M)
Mar  9 20:00:02 kuciapa daemon.info pppd[1212]: Serial connection established.
Mar  9 20:00:02 kuciapa daemon.info pppd[1212]: Using interface 3g-wan
Mar  9 20:00:02 kuciapa daemon.notice pppd[1212]: Connect: 3g-wan <--> /dev/ttyUSB0
Mar  9 20:00:04 kuciapa user.info sysinit: Loading defaults
Mar  9 20:00:04 kuciapa user.info sysinit: Loading synflood protection
Mar  9 20:00:04 kuciapa user.info sysinit: Adding custom chains
Mar  9 20:00:05 kuciapa user.info sysinit: Loading zones
Mar  9 20:00:06 kuciapa user.info sysinit: Loading forwardings
Mar  9 20:00:06 kuciapa user.info sysinit: Loading rules
Mar  9 20:00:07 kuciapa user.info sysinit: Loading redirects
Mar  9 20:00:07 kuciapa user.info sysinit: Loading includes
Mar  9 20:00:08 kuciapa user.info sysinit: Optimizing conntrack
Mar  9 20:00:08 kuciapa user.info sysinit: Loading interfaces
Mar  9 20:00:09 kuciapa user.info firewall: adding lan (br-lan) to zone lan
Mar  9 20:00:11 kuciapa authpriv.info dropbear[1715]: Running in background
Mar  9 20:00:12 kuciapa daemon.warn httpd_gargoyle[1755]: started as root without requesting chroot(), warning only
Mar  9 20:00:12 kuciapa daemon.notice httpd_gargoyle[1755]: httpd_gargoyle/1.0 14mar2008 starting on kuciapa, port 80
Mar  9 20:00:13 kuciapa user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Mar  9 20:00:13 kuciapa user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Mar  9 20:00:14 kuciapa user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override
Mar  9 20:00:14 kuciapa daemon.info dnsmasq[1820]: started, version 2.62 cachesize 150
Mar  9 20:00:14 kuciapa daemon.info dnsmasq[1820]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Mar  9 20:00:14 kuciapa daemon.info dnsmasq[1820]: using local addresses only for domain lan
Mar  9 20:00:14 kuciapa daemon.info dnsmasq[1820]: reading /tmp/resolv.conf.auto
Mar  9 20:00:14 kuciapa daemon.warn dnsmasq[1820]: ignoring nameserver 192.168.254.2 - local interface
Mar  9 20:00:14 kuciapa daemon.info dnsmasq[1820]: using local addresses only for domain lan
Mar  9 20:00:14 kuciapa daemon.info dnsmasq[1820]: read /etc/hosts - 3 addresses
Mar  9 20:00:15 kuciapa user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Mar  9 20:00:15 kuciapa user.info sysinit: (Did you specify correct configuration file path?)
Mar  9 20:00:15 kuciapa user.info sysinit: setting up led WAN
Mar  9 20:00:15 kuciapa user.info sysinit: setting up led LAN1
Mar  9 20:00:15 kuciapa user.info sysinit: setting up led LAN2
Mar  9 20:00:15 kuciapa user.info sysinit: setting up led LAN3
Mar  9 20:00:15 kuciapa user.info sysinit: setting up led LAN4
Mar  9 20:00:15 kuciapa user.info sysinit: setting up led WLAN
Mar  9 20:00:16 kuciapa daemon.warn pppd[1212]: Could not determine remote IP address: defaulting to 10.64.64.64
Mar  9 20:00:16 kuciapa daemon.notice pppd[1212]: local  IP address 37.209.139.75
Mar  9 20:00:16 kuciapa daemon.notice pppd[1212]: remote IP address 10.64.64.64
Mar  9 20:00:16 kuciapa daemon.notice pppd[1212]: primary   DNS address 193.41.112.14
Mar  9 20:00:16 kuciapa daemon.notice pppd[1212]: secondary DNS address 193.41.112.18
Mar  9 20:00:17 kuciapa daemon.notice netifd: Interface 'wan' is now up
Mar  9 20:00:20 kuciapa daemon.info dnsmasq[1820]: reading /tmp/resolv.conf.auto
Mar  9 20:00:20 kuciapa daemon.info dnsmasq[1820]: using nameserver 193.41.112.14#53
Mar  9 20:00:20 kuciapa daemon.info dnsmasq[1820]: using nameserver 193.41.112.18#53
Mar  9 20:00:20 kuciapa daemon.warn dnsmasq[1820]: ignoring nameserver 192.168.254.2 - local interface
Mar  9 20:00:20 kuciapa daemon.info dnsmasq[1820]: using local addresses only for domain lan
Mar  9 20:00:21 kuciapa authpriv.info dropbear[2045]: Child connection from 192.168.254.13:60971
Mar  9 21:26:02 kuciapa authpriv.info dropbear[2045]: Exit before auth: Timeout before auth
Mar  9 21:26:03 kuciapa user.notice ifup: Enabling Router Solicitations on wan (3g-wan)
Mar  9 21:26:04 kuciapa user.info firewall: adding wan (3g-wan) to zone wan
Mar  9 21:26:06 kuciapa authpriv.info dropbear[2273]: Child connection from 192.168.254.13:60972
Mar  9 21:26:10 kuciapa kern.warn kernel: [  134.570000] ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
Mar  9 21:26:10 kuciapa kern.warn kernel: [  134.570000]                old minutes west=0, new minutes west=-60
Mar  9 21:26:15 kuciapa authpriv.notice dropbear[2273]: Password auth succeeded for 'root' from 192.168.254.13:60972
Mar  9 21:26:23 kuciapa user.notice ifup: Enabling Router Solicitations on loopback (lo)

df pokazuje:

root@kuciapa:~# df -h
Filesystem                Size      Used Available Use% Mounted on
rootfs                  320.0K    248.0K     72.0K  78% /
/dev/root                 2.8M      2.8M         0 100% /rom
tmpfs                    14.3M    108.0K     14.1M   1% /tmp
tmpfs                   512.0K         0    512.0K   0% /dev
/dev/mtdblock3          320.0K    248.0K     72.0K  78% /overlay
overlayfs:/overlay      320.0K    248.0K     72.0K  78% /
root@kuciapa:~# 
root@kuciapa:~# ls -l /dev/sd*
brw-r--r--    1 root     root        8,   0 Jan  1  1970 /dev/sda
root@kuciapa:~#
root@kuciapa:~# dmesg|grep sd
[   11.040000] sd 1:0:0:0: [sda] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
[   11.050000] sd 1:0:0:0: [sda] Write Protect is off
[   11.060000] sd 1:0:0:0: [sda] Mode Sense: 0f 00 00 00
[   11.060000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.080000]  sda: sda1 sda2
[   11.090000] sd 1:0:0:0: [sda] Attached SCSI removable disk
[   12.020000] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[   12.030000] sd 1:0:0:0: [sda]  Result: hostbyte=0x01 driverbyte=0x00
[   18.660000] sd 3:0:0:0: [sda] Attached SCSI removable disk
root@kuciapa:~#

Szlag by to!

A w fstabie nic nie mam mimo że ustawiałem poprzez uci!

root@kuciapa:~# blkid 
/dev/sda2: UUID="94ab54e1-70ce-4866-a01b-66dc4d297603" TYPE="swap"
/dev/sda1: UUID="c23c3834-55ad-47c5-a233-c936aab2a4ab" TYPE="ext3"
root@kuciapa:~# uci set fstab.@mount[0].enabled=1
root@kuciapa:~# uci set fstab.@mount[0].uuid=c23c3834-55ad-47c5-a233-c936aab2a4ab
root@kuciapa:~# uci set fstab.@mount[0].target=/overlay
root@kuciapa:~# uci set fstab.@mount[0].fstype=ext3
root@kuciapa:~# uci set fstab.@mount[0].options=rw,noatime
root@kuciapa:~# uci commit fstab
root@kuciapa:~# 
root@kuciapa:~# mount -t ext3 /dev/sda
sda   sda1  sda2
root@kuciapa:~# mount -t ext3 /dev/sda1 /mnt
root@kuciapa:~# cp -R /overlay/* /mnt
root@kuciapa:~# ls -la /mnt/
drwxr-xr-x    9 root     root          4096 Mar  9 21:21 .
drwxr-xr-x    1 root     root             0 Mar  8 17:44 ..
drwxr-xr-x    8 root     root          4096 Mar  9 21:21 etc
drwxr-xr-x    2 root     root          4096 Mar  9 21:21 lib
drwx------    2 root     root         16384 Mar  9 09:57 lost+found
drwxr-xr-x    5 root     root          4096 Mar  9 21:21 mnt
drwxr-xr-x    3 root     root          4096 Mar  9 21:21 plugin_root
drwxr-xr-x    3 root     root          4096 Mar  9 21:21 root
drwxr-xr-x    4 root     root          4096 Mar  9 21:21 usr
root@kuciapa:~# wget http://ecco.selfip.net/projekty/49_usb_modeswitch -O /lib/preinit/49_usb_modeswitch
Connecting to ecco.selfip.net (178.235.241.16:80)
49_usb_modeswitch    100% |**********************************************************************************************************************************|   884   0:00:00 ETA
root@kuciapa:~# ls -la /lib/preinit/
drwxrwxr-x    1 root     root             0 Mar  9 21:21 .
drwxrwxr-x    1 root     root             0 Mar  8 21:14 ..
-rw-r--r--    1 root     root            25 Feb 16 07:06 00_extroot.conf
-rw-rw-r--    1 root     root           111 Oct 20 19:54 02_default_set_state
-rw-rw-r--    1 root     root           105 Oct 20 19:54 03_preinit_do_ar71xx.sh
-rw-rw-r--    1 root     root           176 Oct 20 19:54 05_enable_reset_button_ar71xx
-rw-rw-r--    1 root     root           193 Oct 20 19:54 05_mount_skip
-rw-rw-r--    1 root     root           813 Oct 20 19:54 05_set_iface_mac_ar71xx
-rw-rw-r--    1 root     root           153 Oct 20 19:54 05_set_preinit_iface_ar71xx
-rw-rw-r--    1 root     root           353 Oct 20 19:54 10_check_for_mtd
-rw-rw-r--    1 root     root           576 Oct 20 19:54 10_essential_fs
-rw-rw-r--    1 root     root           365 Oct 20 19:54 10_indicate_failsafe
-rw-rw-r--    1 root     root          1191 Oct 20 19:54 10_indicate_preinit
-rw-rw-r--    1 root     root           344 Oct 20 19:54 20_check_jffs2_ready
-rw-rw-r--    1 root     root           786 Oct 20 19:54 20_device_fs_mount
-rw-rw-r--    1 root     root          1027 Oct 20 19:54 30_device_fs_daemons
-rw-rw-r--    1 root     root          2084 Oct 20 19:54 30_failsafe_wait
-rw-rw-r--    1 root     root           188 Oct 20 19:54 40_init_shm
-rw-rw-r--    1 root     root           301 Oct 20 19:54 40_mount_devpts
-rw-rw-r--    1 root     root           498 Oct 20 19:54 40_mount_jffs2
-rw-rw-r--    1 root     root           258 Oct 20 19:54 40_run_failsafe_hook
-rw-rw-r--    1 root     root           518 Oct 20 19:54 41_merge_overlay_hooks
-rw-r--r--    1 root     root           884 Mar  9 21:21 49_usb_modeswitch
-rw-rw-r--    1 root     root           766 Oct 20 19:54 50_choose_console
-rw-r--r--    1 root     root          2274 Feb 16 07:06 50_determine_usb_root
-rw-rw-r--    1 root     root           282 Oct 20 19:54 50_indicate_regular_preinit
-rw-r--r--    1 root     root          1630 Feb 16 07:06 55_determine_extroot_sysupgrade
-rw-rw-r--    1 root     root           196 Oct 20 19:54 60_init_hotplug
-rw-r--r--    1 root     root           802 Feb 16 07:06 60_pivot_usb_root
-rw-rw-r--    1 root     root           247 Oct 20 19:54 70_initramfs_test
-rw-rw-r--    1 root     root           327 Oct 20 19:54 70_pivot_jffs2_root
-rw-rw-r--    1 root     root           192 Oct 20 19:54 80_mount_root
-rw-rw-r--    1 root     root           265 Oct 20 19:54 90_init_console
-rw-rw-r--    1 root     root           240 Oct 20 19:54 90_mount_no_jffs2
-rw-rw-r--    1 root     root           311 Oct 20 19:54 90_restore_config
-rw-rw-r--    1 root     root           380 Oct 20 19:54 99_10_failsafe_login
-rw-rw-r--    1 root     root           207 Oct 20 19:54 99_10_mount_no_mtd
-rw-rw-r--    1 root     root           379 Oct 20 19:54 99_10_run_init
root@kuciapa:~# ls
root@kuciapa:~# umount /mnt/
root@kuciapa:~# df -h
Filesystem                Size      Used Available Use% Mounted on
rootfs                  320.0K    248.0K     72.0K  78% /
/dev/root                 2.8M      2.8M         0 100% /rom
tmpfs                    14.3M      1.7M     12.6M  12% /tmp
tmpfs                   512.0K         0    512.0K   0% /dev
/dev/mtdblock3          320.0K    248.0K     72.0K  78% /overlay
overlayfs:/overlay      320.0K    248.0K     72.0K  78% /
/dev/sda1                 3.5G     73.2M      3.2G   2% /mnt/sda1
root@kuciapa:~# ls /mnt/
sda1  sda2  sda5
root@kuciapa:~# ls /mnt/sda1/
etc          lib          lost+found   mnt          plugin_root  root         usr
root@kuciapa:~# 
root@kuciapa:~# 
root@kuciapa:~# umount /dev/sda1

14 Odpowiedź przez plesken (edytowany przez plesken 2013-03-09 22:28:22)

  • Zarejestrowany: 2007-03-23
  • Posty: 48

Odp: gargoyle i extroot

Teraz sobie kartę microsd włączył a później wyłączył. Czy można prosić o konstruktywne rady aby uporać się z tym?

Log:

root@kuciapa:~# logread
Jan  1 01:01:28 kuciapa kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 802f5cd0, node_mem_map 81000000
Jan  1 01:01:28 kuciapa kern.debug kernel: [    0.000000]   Normal zone: 64 pages used for memmap
Jan  1 01:01:28 kuciapa kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Jan  1 01:01:28 kuciapa kern.debug kernel: [    0.000000]   Normal zone: 8128 pages, LIFO batch:0
Jan  1 01:01:28 kuciapa kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jan  1 01:01:28 kuciapa kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Jan  1 01:01:28 kuciapa kern.warn kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Jan  1 01:01:28 kuciapa kern.notice kernel: [    0.000000] Kernel command line:  board=TL-WR841N-v8 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
Jan  1 01:01:28 kuciapa kern.info kernel: [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Jan  1 01:01:28 kuciapa kern.info kernel: [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 01:01:28 kuciapa kern.info kernel: [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 01:01:28 kuciapa kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Jan  1 01:01:28 kuciapa kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Jan  1 01:01:28 kuciapa kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Jan  1 01:01:28 kuciapa kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Jan  1 01:01:28 kuciapa kern.info kernel: [    0.000000] Memory: 28976k/32768k available (2227k kernel code, 3792k reserved, 421k data, 216k init, 0k highmem)
Jan  1 01:01:28 kuciapa kern.info kernel: [    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan  1 01:01:28 kuciapa kern.info kernel: [    0.000000] NR_IRQS:51
Jan  1 01:01:28 kuciapa kern.info kernel: [    0.000000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.080000] pid_max: default: 32768 minimum: 301
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.080000] Mount-cache hash table entries: 512
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.090000] NET: Registered protocol family 16
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.090000] gpiochip_add: registered GPIOs 0 to 22 on device: ath79
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.100000] MIPS: machine is TP-LINK TL-MR3420 v2 | TL-WR841N/ND v8
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.520000] bio: create slab <bio-0> at 0
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.520000] Switching to clocksource MIPS
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.530000] NET: Registered protocol family 2
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.530000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.540000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Jan  1 01:01:29 kuciapa kern.info kernel: [    0.550000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 01:01:29 kuciapa kern.info kernel: [    9.060000] scsi1 : usb-storage 1-1:1.1
Jan  1 01:01:29 kuciapa kern.notice kernel: [   10.060000] scsi 0:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Jan  1 01:01:29 kuciapa kern.notice kernel: [   10.070000] scsi 1:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
Jan  1 01:01:29 kuciapa kern.notice kernel: [   10.080000] sd 1:0:0:0: [sda] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
Jan  1 01:01:29 kuciapa kern.notice kernel: [   10.090000] sd 1:0:0:0: [sda] Write Protect is off
Jan  1 01:01:29 kuciapa kern.debug kernel: [   10.100000] sd 1:0:0:0: [sda] Mode Sense: 0f 00 00 00
Jan  1 01:01:29 kuciapa kern.notice kernel: [   10.100000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  1 01:01:29 kuciapa kern.info kernel: [   10.120000]  sda: sda1 sda2
Jan  1 01:01:29 kuciapa kern.notice kernel: [   10.130000] sd 1:0:0:0: [sda] Attached SCSI removable disk
Jan  1 01:01:29 kuciapa kern.warn kernel: [   11.010000] usb 1-1: usbfs: process 489 (usb_modeswitch) did not claim interface 0 before use
Jan  1 01:01:29 kuciapa kern.info kernel: [   11.020000] usb 1-1: USB disconnect, device number 2
Jan  1 01:01:29 kuciapa kern.notice kernel: [   11.060000] sd 1:0:0:0: [sda] Synchronizing SCSI cache
Jan  1 01:01:29 kuciapa kern.info kernel: [   11.070000] sd 1:0:0:0: [sda]  Result: hostbyte=0x01 driverbyte=0x00
Jan  1 01:01:29 kuciapa kern.info kernel: [   16.520000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Jan  1 01:01:29 kuciapa kern.info kernel: [   16.670000] scsi2 : usb-storage 1-1:1.4
Jan  1 01:01:29 kuciapa kern.info kernel: [   16.680000] scsi3 : usb-storage 1-1:1.5
Jan  1 01:01:29 kuciapa kern.notice kernel: [   17.680000] scsi 2:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Jan  1 01:01:29 kuciapa kern.notice kernel: [   17.690000] scsi 3:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
Jan  1 01:01:29 kuciapa kern.notice kernel: [   17.700000] sd 3:0:0:0: [sda] Attached SCSI removable disk
Jan  1 01:01:29 kuciapa kern.info kernel: [   82.620000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
Jan  1 01:01:29 kuciapa kern.info kernel: [   82.630000] Backport based on wireless-testing.git master-2012-09-07
Jan  1 01:01:29 kuciapa kern.info kernel: [   82.640000] compat.git: wireless-testing.git
Jan  1 01:01:29 kuciapa kern.info kernel: [   82.780000] cfg80211: Calling CRDA to update world regulatory domain
Jan  1 01:01:29 kuciapa kern.info kernel: [   82.780000] cfg80211: World regulatory domain updated:
Jan  1 01:01:29 kuciapa kern.info kernel: [   82.790000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 01:01:29 kuciapa kern.info kernel: [   82.800000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:01:29 kuciapa kern.info kernel: [   82.800000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:01:29 kuciapa kern.debug kernel: [   83.510000] ath: EEPROM regdomain: 0x0
Jan  1 01:01:29 kuciapa kern.debug kernel: [   83.510000] ath: EEPROM indicates default country code should be used
Jan  1 01:01:29 kuciapa kern.debug kernel: [   83.510000] ath: doing EEPROM country->regdmn map search
Jan  1 01:01:29 kuciapa kern.debug kernel: [   83.510000] ath: country maps to regdmn code: 0x3a
Jan  1 01:01:29 kuciapa kern.debug kernel: [   83.510000] ath: Country alpha2 being used: US
Jan  1 01:01:29 kuciapa kern.debug kernel: [   83.510000] ath: Regpair used: 0x3a
Jan  1 01:01:29 kuciapa kern.debug kernel: [   83.520000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Jan  1 01:01:29 kuciapa kern.debug kernel: [   83.520000] Registered led device: ath9k-phy0
Jan  1 01:01:29 kuciapa kern.info kernel: [   83.520000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
Jan  1 01:01:29 kuciapa kern.info kernel: [   83.520000] cfg80211: Calling CRDA for country: US
Jan  1 01:01:29 kuciapa kern.info kernel: [   83.530000] cfg80211: Regulatory domain changed to country: US
Jan  1 01:01:29 kuciapa kern.info kernel: [   83.540000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 01:01:29 kuciapa kern.info kernel: [   83.540000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:01:29 kuciapa kern.info kernel: [   83.550000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan  1 01:01:29 kuciapa kern.info kernel: [   83.750000] PPP generic driver version 2.4.2
Jan  1 01:01:29 kuciapa kern.info kernel: [   83.790000] tun: Universal TUN/TAP device driver, 1.6
Jan  1 01:01:29 kuciapa kern.info kernel: [   83.790000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan  1 01:01:29 kuciapa kern.info kernel: [   83.880000] GRE over IPv4 demultiplexor driver
Jan  1 01:01:29 kuciapa kern.warn kernel: [   83.900000] ip_gre: Unknown symbol icmpv6_send (err 0)
Jan  1 01:01:29 kuciapa kern.info kernel: [   84.010000] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 01:01:29 kuciapa kern.info kernel: [   84.480000] NET: Registered protocol family 24
Jan  1 01:01:31 kuciapa user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
Jan  1 01:01:31 kuciapa user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:32 kuciapa user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:32 kuciapa user.notice usb-modeswitch: 1-1:1.2: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:32 kuciapa user.notice usb-modeswitch: 1-1:1.3: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:32 kuciapa user.notice usb-modeswitch: 1-1:1.4: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:32 kuciapa user.notice usb-modeswitch: 1-1:1.5: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:33 kuciapa daemon.notice netifd: Interface 'lan' is now up
Jan  1 01:01:33 kuciapa kern.info kernel: [   93.310000] device eth1 entered promiscuous mode
Jan  1 01:01:33 kuciapa daemon.notice netifd: Interface 'loopback' is now up
Jan  1 01:01:33 kuciapa kern.info kernel: [   93.910000] eth1: link up (1000Mbps/Full duplex)
Jan  1 01:01:33 kuciapa kern.info kernel: [   93.910000] br-lan: port 1(eth1) entered forwarding state
Jan  1 01:01:33 kuciapa kern.info kernel: [   93.920000] br-lan: port 1(eth1) entered forwarding state
Jan  1 01:01:34 kuciapa user.notice ifup: Enabling Router Solicitations on lan (br-lan)
Jan  1 01:01:35 kuciapa kern.info kernel: [   95.920000] br-lan: port 1(eth1) entered forwarding state
Jan  1 01:01:37 kuciapa daemon.notice pppd[1212]: pppd 2.4.5 started by root, uid 0
Mar  9 20:00:01 kuciapa local2.info chat[1296]: abort on (BUSY)
Mar  9 20:00:01 kuciapa local2.info chat[1296]: abort on (NO CARRIER)
Mar  9 20:00:01 kuciapa local2.info chat[1296]: abort on (ERROR)
Mar  9 20:00:01 kuciapa local2.info chat[1296]: report (CONNECT)
Mar  9 20:00:01 kuciapa local2.info chat[1296]: timeout set to 10 seconds
Mar  9 20:00:01 kuciapa local2.info chat[1296]: send (AT&F^M)
Mar  9 20:00:01 kuciapa local2.info chat[1296]: expect (OK)
Mar  9 20:00:01 kuciapa local2.info chat[1296]: AT&F^M^M
Mar  9 20:00:01 kuciapa local2.info chat[1296]: OK
Mar  9 20:00:01 kuciapa local2.info chat[1296]:  -- got it
Mar  9 20:00:01 kuciapa local2.info chat[1296]: send (ATE1^M)
Mar  9 20:00:01 kuciapa local2.info chat[1296]: expect (OK)
Mar  9 20:00:01 kuciapa local2.info chat[1296]: ^M
Mar  9 20:00:01 kuciapa local2.info chat[1296]: ATE1^M^M
Mar  9 20:00:01 kuciapa local2.info chat[1296]: OK
Mar  9 20:00:01 kuciapa local2.info chat[1296]:  -- got it
Mar  9 20:00:01 kuciapa local2.info chat[1296]: send (AT+CGDCONT=1,"IP","darmowy"^M)
Mar  9 20:00:02 kuciapa user.info sysinit: mount: mounting none on /proc/bus/usb failed: Device or resource busy
Mar  9 20:00:02 kuciapa local2.info chat[1296]: timeout set to 30 seconds
Mar  9 20:00:02 kuciapa local2.info chat[1296]: expect (OK)
Mar  9 20:00:02 kuciapa local2.info chat[1296]: ^M
Mar  9 20:00:02 kuciapa local2.info chat[1296]: AT+CGDCONT=1,"IP","darmowy"^M^M
Mar  9 20:00:02 kuciapa local2.info chat[1296]: OK
Mar  9 20:00:02 kuciapa local2.info chat[1296]:  -- got it
Mar  9 20:00:02 kuciapa local2.info chat[1296]: send (ATD*99***1#^M)
Mar  9 20:00:02 kuciapa local2.info chat[1296]: expect (CONNECT)
Mar  9 20:00:02 kuciapa local2.info chat[1296]: ^M
Mar  9 20:00:02 kuciapa local2.info chat[1296]: ATD*99***1#^M^M
Mar  9 20:00:02 kuciapa local2.info chat[1296]: CONNECT
Mar  9 20:00:02 kuciapa local2.info chat[1296]:  -- got it
Mar  9 20:00:02 kuciapa local2.info chat[1296]: send ( ^M)
Mar  9 20:00:02 kuciapa daemon.info pppd[1212]: Serial connection established.
Mar  9 20:00:02 kuciapa daemon.info pppd[1212]: Using interface 3g-wan
Mar  9 20:00:02 kuciapa daemon.notice pppd[1212]: Connect: 3g-wan <--> /dev/ttyUSB0
Mar  9 20:00:03 kuciapa user.info sysinit: Loading defaults
Mar  9 20:00:04 kuciapa user.info sysinit: Loading synflood protection
Mar  9 20:00:04 kuciapa user.info sysinit: Adding custom chains
Mar  9 20:00:05 kuciapa user.info sysinit: Loading zones
Mar  9 20:00:06 kuciapa user.info sysinit: Loading forwardings
Mar  9 20:00:06 kuciapa user.info sysinit: Loading rules
Mar  9 20:00:07 kuciapa user.info sysinit: Loading redirects
Mar  9 20:00:07 kuciapa user.info sysinit: Loading includes
Mar  9 20:00:08 kuciapa user.info sysinit: Optimizing conntrack
Mar  9 20:00:08 kuciapa user.info sysinit: Loading interfaces
Mar  9 20:00:08 kuciapa user.info firewall: adding lan (br-lan) to zone lan
Mar  9 20:00:11 kuciapa authpriv.info dropbear[1701]: Running in background
Mar  9 20:00:12 kuciapa daemon.warn httpd_gargoyle[1740]: started as root without requesting chroot(), warning only
Mar  9 20:00:12 kuciapa daemon.notice httpd_gargoyle[1740]: httpd_gargoyle/1.0 14mar2008 starting on kuciapa, port 80
Mar  9 20:00:12 kuciapa authpriv.info dropbear[1751]: Child connection from 192.168.254.13:34947
Mar  9 20:00:13 kuciapa user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Mar  9 20:00:13 kuciapa user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Mar  9 20:00:13 kuciapa user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override
Mar  9 20:00:14 kuciapa daemon.info dnsmasq[1797]: started, version 2.62 cachesize 150
Mar  9 20:00:14 kuciapa daemon.info dnsmasq[1797]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Mar  9 20:00:14 kuciapa daemon.info dnsmasq[1797]: using local addresses only for domain lan
Mar  9 20:00:14 kuciapa daemon.info dnsmasq[1797]: reading /tmp/resolv.conf.auto
Mar  9 20:00:14 kuciapa daemon.warn dnsmasq[1797]: ignoring nameserver 192.168.254.2 - local interface
Mar  9 20:00:14 kuciapa daemon.info dnsmasq[1797]: using local addresses only for domain lan
Mar  9 20:00:14 kuciapa daemon.info dnsmasq[1797]: read /etc/hosts - 3 addresses
Mar  9 20:00:15 kuciapa user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Mar  9 20:00:15 kuciapa user.info sysinit: (Did you specify correct configuration file path?)
Mar  9 20:00:15 kuciapa user.info sysinit: setting up led WAN
Mar  9 20:00:16 kuciapa user.info sysinit: setting up led LAN1
Mar  9 20:00:16 kuciapa user.info sysinit: setting up led LAN2
Mar  9 20:00:16 kuciapa user.info sysinit: setting up led LAN3
Mar  9 20:00:16 kuciapa user.info sysinit: setting up led LAN4
Mar  9 20:00:16 kuciapa user.info sysinit: setting up led WLAN
Mar  9 20:00:17 kuciapa daemon.warn pppd[1212]: Could not determine remote IP address: defaulting to 10.64.64.64
Mar  9 20:00:17 kuciapa daemon.notice pppd[1212]: local  IP address 78.30.97.109
Mar  9 20:00:17 kuciapa daemon.notice pppd[1212]: remote IP address 10.64.64.64
Mar  9 20:00:17 kuciapa daemon.notice pppd[1212]: primary   DNS address 193.41.112.14
Mar  9 20:00:17 kuciapa daemon.notice pppd[1212]: secondary DNS address 193.41.112.18
Mar  9 20:00:18 kuciapa daemon.notice netifd: Interface 'wan' is now up
Mar  9 20:00:20 kuciapa daemon.info dnsmasq[1797]: reading /tmp/resolv.conf.auto
Mar  9 20:00:20 kuciapa daemon.info dnsmasq[1797]: using nameserver 193.41.112.14#53
Mar  9 20:00:20 kuciapa daemon.info dnsmasq[1797]: using nameserver 193.41.112.18#53
Mar  9 20:00:20 kuciapa daemon.warn dnsmasq[1797]: ignoring nameserver 192.168.254.2 - local interface
Mar  9 20:00:20 kuciapa daemon.info dnsmasq[1797]: using local addresses only for domain lan

Przecież to jest totolotek...

15 Odpowiedź przez plesken

  • Zarejestrowany: 2007-03-23
  • Posty: 48

Odp: gargoyle i extroot

Wywaliłem ten skrypt ze wcześniejszym przełączaniem i teraz znowu inny log:

Jan  1 01:01:16 kuciapa kern.crit kernel: [   76.130000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #207169: comm gargoyle_header: reading directory lblock 0
Jan  1 01:01:17 kuciapa user.notice upnp daemon: external interface not found, not starting
Jan  1 01:01:18 kuciapa user.notice ifup: Enabling Router Solicitations on loopback (lo)
Jan  1 01:01:32 kuciapa kern.crit kernel: [   92.610000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #2: comm mkdir: reading directory lblock 0
Jan  1 01:01:32 kuciapa user.notice fstab: mkdir: can't create directory '/mnt/sda2': Read-only file system
Jan  1 01:01:36 kuciapa kern.crit kernel: [   96.090000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95617: comm overview.sh: reading directory lblock 0
Jan  1 01:01:36 kuciapa kern.crit kernel: [   96.100000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm overview.sh: reading directory lblock 0
Jan  1 01:01:36 kuciapa kern.crit kernel: [   96.120000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm overview.sh: reading directory lblock 0
Jan  1 01:01:36 kuciapa kern.crit kernel: [   96.130000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm sh: reading directory lblock 0
Jan  1 01:01:36 kuciapa kern.crit kernel: [   96.240000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm sh: reading directory lblock 0
Jan  1 01:01:36 kuciapa kern.crit kernel: [   96.290000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95617: comm sh: reading directory lblock 0
Jan  1 01:01:36 kuciapa kern.crit kernel: [   96.310000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm uci: reading directory lblock 0
Jan  1 01:01:36 kuciapa kern.crit kernel: [   96.320000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm uci: reading directory lblock 0
Jan  1 01:01:37 kuciapa user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:39 kuciapa kern.crit kernel: [   99.410000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #207169: comm gcom: reading directory lblock 0
Jan  1 01:01:39 kuciapa user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:39 kuciapa user.notice usb-modeswitch: 1-1:1.2: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:39 kuciapa user.notice usb-modeswitch: 1-1:1.3: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:40 kuciapa user.notice usb-modeswitch: 1-1:1.4: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:40 kuciapa user.notice usb-modeswitch: 1-1:1.5: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:01:43 kuciapa kern.crit kernel: [  103.060000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #207169: comm pppd: reading directory lblock 0
Jan  1 01:01:43 kuciapa kern.crit kernel: [  103.140000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #2: comm pppd: reading directory lblock 0
Jan  1 01:01:43 kuciapa daemon.notice pppd[2649]: pppd 2.4.5 started by root, uid 0
Jan  1 01:01:44 kuciapa kern.crit kernel: [  104.200000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #207169: comm chat: reading directory lblock 0
Jan  1 01:01:44 kuciapa local2.info chat[2658]: abort on (BUSY)
Jan  1 01:01:44 kuciapa local2.info chat[2658]: abort on (NO CARRIER)
Jan  1 01:01:44 kuciapa local2.info chat[2658]: abort on (ERROR)
Jan  1 01:01:44 kuciapa local2.info chat[2658]: report (CONNECT)
Jan  1 01:01:44 kuciapa local2.info chat[2658]: timeout set to 10 seconds
Jan  1 01:01:44 kuciapa local2.info chat[2658]: send (AT&F^M)
Jan  1 01:01:44 kuciapa local2.info chat[2658]: expect (OK)
Jan  1 01:01:44 kuciapa local2.info chat[2658]: AT&F^M^M
Jan  1 01:01:44 kuciapa local2.info chat[2658]: OK
Jan  1 01:01:44 kuciapa local2.info chat[2658]:  -- got it
Jan  1 01:01:44 kuciapa local2.info chat[2658]: send (ATE1^M)
Jan  1 01:01:44 kuciapa local2.info chat[2658]: expect (OK)
Jan  1 01:01:44 kuciapa local2.info chat[2658]: ^M
Jan  1 01:01:44 kuciapa local2.info chat[2658]: ATE1^M^M
Jan  1 01:01:44 kuciapa local2.info chat[2658]: OK
Jan  1 01:01:44 kuciapa local2.info chat[2658]:  -- got it
Jan  1 01:01:44 kuciapa local2.info chat[2658]: send (AT+CGDCONT=1,"IP","darmowy"^M)
Jan  1 01:01:44 kuciapa local2.info chat[2658]: timeout set to 30 seconds
Jan  1 01:01:44 kuciapa local2.info chat[2658]: expect (OK)
Jan  1 01:01:44 kuciapa local2.info chat[2658]: ^M
Jan  1 01:01:44 kuciapa local2.info chat[2658]: AT+CGDCONT=1,"IP","darmowy"^M^M
Jan  1 01:01:44 kuciapa local2.info chat[2658]: OK
Jan  1 01:01:44 kuciapa local2.info chat[2658]:  -- got it
Jan  1 01:01:44 kuciapa local2.info chat[2658]: send (ATD*99***1#^M)
Jan  1 01:01:44 kuciapa local2.info chat[2658]: expect (CONNECT)
Jan  1 01:01:44 kuciapa local2.info chat[2658]: ^M
Jan  1 01:01:44 kuciapa local2.info chat[2658]: ATD*99***1#^M^M
Jan  1 01:01:44 kuciapa local2.info chat[2658]: CONNECT
Jan  1 01:01:44 kuciapa local2.info chat[2658]:  -- got it
Jan  1 01:01:44 kuciapa local2.info chat[2658]: send ( ^M)
Jan  1 01:01:44 kuciapa daemon.info pppd[2649]: Serial connection established.
Jan  1 01:01:44 kuciapa daemon.info pppd[2649]: Using interface 3g-wan
Jan  1 01:01:44 kuciapa daemon.notice pppd[2649]: Connect: 3g-wan <--> /dev/ttyUSB0
Jan  1 01:01:59 kuciapa daemon.warn pppd[2649]: Could not determine remote IP address: defaulting to 10.64.64.64
Jan  1 01:01:59 kuciapa daemon.notice pppd[2649]: local  IP address 151.248.46.113
Jan  1 01:01:59 kuciapa daemon.notice pppd[2649]: remote IP address 10.64.64.64
Jan  1 01:01:59 kuciapa daemon.notice pppd[2649]: primary   DNS address 193.41.112.14
Jan  1 01:01:59 kuciapa daemon.notice pppd[2649]: secondary DNS address 193.41.112.18
Jan  1 01:01:59 kuciapa daemon.notice netifd: Interface 'wan' is now up
Jan  1 01:02:00 kuciapa user.notice ifup: Enabling Router Solicitations on wan (3g-wan)
Jan  1 01:02:01 kuciapa user.info firewall: adding wan (3g-wan) to zone wan
Jan  1 01:02:02 kuciapa daemon.info dnsmasq[976]: reading /tmp/resolv.conf.auto
Jan  1 01:02:02 kuciapa daemon.info dnsmasq[976]: using nameserver 193.41.112.14#53
Jan  1 01:02:02 kuciapa daemon.info dnsmasq[976]: using nameserver 193.41.112.18#53
Jan  1 01:02:02 kuciapa daemon.warn dnsmasq[976]: ignoring nameserver 192.168.254.2 - local interface
Jan  1 01:02:02 kuciapa daemon.info dnsmasq[976]: using local addresses only for domain lan
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.220000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.230000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.250000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.260000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.280000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.290000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.310000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.320000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.350000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.360000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.370000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.380000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.400000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.420000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.430000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.440000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:04 kuciapa kern.crit kernel: [  124.910000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #207169: comm iptables: reading directory lblock 0
Jan  1 01:02:05 kuciapa kern.crit kernel: [  125.140000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm tc: reading directory lblock 0
Jan  1 01:02:05 kuciapa kern.crit kernel: [  125.150000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm tc: reading directory lblock 0
Jan  1 01:02:05 kuciapa kern.crit kernel: [  125.160000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm tc: reading directory lblock 0
Jan  1 01:02:05 kuciapa kern.crit kernel: [  125.580000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:05 kuciapa kern.crit kernel: [  125.600000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:05 kuciapa kern.crit kernel: [  125.610000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:05 kuciapa kern.crit kernel: [  125.620000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:05 kuciapa kern.crit kernel: [  125.640000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:05 kuciapa kern.crit kernel: [  125.660000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:05 kuciapa kern.crit kernel: [  125.670000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:05 kuciapa kern.crit kernel: [  125.680000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:05 kuciapa kern.crit kernel: [  125.700000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:05 kuciapa kern.crit kernel: [  125.710000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:05 kuciapa kern.crit kernel: [  125.730000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:05 kuciapa kern.crit kernel: [  125.740000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:06 kuciapa kern.crit kernel: [  126.080000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:06 kuciapa kern.crit kernel: [  126.100000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:06 kuciapa kern.crit kernel: [  126.110000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:06 kuciapa kern.crit kernel: [  126.120000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:06 kuciapa kern.crit kernel: [  126.220000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:06 kuciapa kern.crit kernel: [  126.230000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:06 kuciapa kern.crit kernel: [  126.250000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:06 kuciapa kern.crit kernel: [  126.260000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:06 kuciapa kern.crit kernel: [  126.390000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm ipset: reading directory lblock 0
Jan  1 01:02:06 kuciapa kern.crit kernel: [  126.410000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm ipset: reading directory lblock 0
Jan  1 01:02:06 kuciapa kern.crit kernel: [  126.420000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm ipset: reading directory lblock 0
Jan  1 01:02:06 kuciapa kern.crit kernel: [  126.570000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Jan  1 01:02:06 kuciapa kern.crit kernel: [  126.580000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Jan  1 01:02:06 kuciapa kern.warn kernel: [  126.660000] ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
Jan  1 01:02:06 kuciapa kern.warn kernel: [  126.670000]                old minutes west=0, new minutes west=-60
Jan  1 01:02:07 kuciapa kern.crit kernel: [  127.000000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #207169: comm bwmon_gargoyle: reading directory lblock 0
Mar  9 22:49:48 kuciapa kern.info kernel: [  134.440000] IMQ driver unloaded successfully.
Mar  9 22:49:48 kuciapa kern.info kernel: [  134.470000]     Hooked IMQ after mangle on INPUT
Mar  9 22:49:48 kuciapa kern.info kernel: [  134.470000]     Hooked IMQ after mangle on FORWARD
Mar  9 22:49:48 kuciapa kern.info kernel: [  134.470000] IMQ driver loaded successfully. (numdevs = 1, numqueues = 1)
Mar  9 22:49:54 kuciapa user.notice miniupnpd: adding firewall rules for 3g-wan to zone wan
Mar  9 22:49:54 kuciapa kern.crit kernel: [  140.960000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Mar  9 22:49:54 kuciapa kern.crit kernel: [  140.970000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Mar  9 22:49:54 kuciapa kern.crit kernel: [  140.980000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm iptables: reading directory lblock 0
Mar  9 22:49:54 kuciapa kern.crit kernel: [  141.000000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm iptables: reading directory lblock 0
Mar  9 22:49:55 kuciapa kern.crit kernel: [  141.140000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #7969: comm miniupnpd: reading directory lblock 0
Mar  9 22:49:55 kuciapa kern.crit kernel: [  141.150000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm miniupnpd: reading directory lblock 0
Mar  9 22:49:55 kuciapa kern.crit kernel: [  141.170000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #95618: comm miniupnpd: reading directory lblock 0
Mar  9 22:49:55 kuciapa daemon.err miniupnpd[3571]: could not open lease file: /var/upnp.leases
Mar  9 22:49:55 kuciapa daemon.notice miniupnpd[3571]: HTTP listening on port 5000
Mar  9 22:49:55 kuciapa daemon.notice miniupnpd[3571]: Listening for NAT-PMP traffic on port 5351

Tylko niech nikt nie mówi że coś z kartą, bo dzisiaj kupowana.

Pytanie czy openwrt w gargoyle się różni od luci? Może powinienem olać gargoyle - sorry Czarek ale totolotek jak widzisz...

16 Odpowiedź przez plesken

  • Zarejestrowany: 2007-03-23
  • Posty: 48

Odp: gargoyle i extroot

Dziwna rzecz. Wczoraj gdy Czarek pytał mnie o rodzaj modemu i po zdjęciu pokrywki zobaczyłem na nalepce przyklejonej do plastiku że to jest e3131. Nigdzie indziej nic nie znalazłem. Gmerałem w sieci i znalazłem http://www.bez-kabli.pl/printview.php?t … mp;start=0 gdzie wygląd i pudełko jest identyczne do tego modemu co kupiłem.
Widząc komendy w AT w te pędy zainstalowałem picocom i wyłączyłem CD-ROM:

AT^SETPORT="A1,A2;1,16,3,2,A2"

Dodatkowo gdzieś na necie znalazłem info ze strony http://www.bez-kabli.pl/viewtopic.php?t=33783 ustawiłem CS_ONLY w celu poprawnego wykrywania sieci aero2:

AT^SYSCFG=2,2,3FFFFFFF,1,2

W sumie wczoraj nic nie zwojowałem (dzisiaj w nocy), więc położyłem się spać. Wstałem rano i od nowa założyłem partycje z filesystemem ext3. Uruchamiam ruter z modemem i kartą microsd i dostaje log:

Jan  1 01:00:36 kuciapa kern.notice kernel: [    0.770000] 0x0000003a0000-0x0000003f0000 : "rootfs_data"
Jan  1 01:00:36 kuciapa kern.notice kernel: [    0.770000] 0x0000003f0000-0x000000400000 : "art"
Jan  1 01:00:36 kuciapa kern.notice kernel: [    0.780000] 0x000000020000-0x0000003f0000 : "firmware"
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.810000] ag71xx_mdio: probed
Jan  1 01:00:36 kuciapa kern.info kernel: [    0.810000] eth0: Atheros AG71xx at 0xb9000000, irq 4
Jan  1 01:00:36 kuciapa kern.info kernel: [    1.370000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
Jan  1 01:00:37 kuciapa kern.info kernel: [    1.380000] eth1: Atheros AG71xx at 0xba000000, irq 5
Jan  1 01:00:37 kuciapa kern.info kernel: [    1.930000] eth1: Found an AR934X built-in switch
Jan  1 01:00:37 kuciapa kern.info kernel: [    2.970000] TCP cubic registered
Jan  1 01:00:37 kuciapa kern.info kernel: [    2.970000] NET: Registered protocol family 17
Jan  1 01:00:37 kuciapa kern.notice kernel: [    2.970000] Bridge firewalling registered
Jan  1 01:00:37 kuciapa kern.info kernel: [    2.980000] Ebtables v2.0 registered
Jan  1 01:00:37 kuciapa kern.info kernel: [    2.980000] 8021q: 802.1Q VLAN Support v1.8
Jan  1 01:00:37 kuciapa kern.info kernel: [    2.990000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Jan  1 01:00:37 kuciapa kern.info kernel: [    3.000000] Freeing unused kernel memory: 216k freed
Jan  1 01:00:37 kuciapa kern.debug kernel: [    4.950000] Registered led device: tp-link:green:lan1
Jan  1 01:00:37 kuciapa kern.debug kernel: [    4.950000] Registered led device: tp-link:green:lan2
Jan  1 01:00:37 kuciapa kern.debug kernel: [    4.950000] Registered led device: tp-link:green:lan3
Jan  1 01:00:37 kuciapa kern.debug kernel: [    4.950000] Registered led device: tp-link:green:lan4
Jan  1 01:00:37 kuciapa kern.debug kernel: [    4.950000] Registered led device: tp-link:green:qss
Jan  1 01:00:37 kuciapa kern.debug kernel: [    4.950000] Registered led device: tp-link:green:system
Jan  1 01:00:37 kuciapa kern.debug kernel: [    4.950000] Registered led device: tp-link:green:wan
Jan  1 01:00:37 kuciapa kern.debug kernel: [    4.950000] Registered led device: tp-link:green:wlan
Jan  1 01:00:37 kuciapa kern.notice kernel: [    8.240000] JFFS2 notice: (450) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 22 of xref (0 dead, 12 orphan) found.
Jan  1 01:00:37 kuciapa kern.notice kernel: [    8.900000] SCSI subsystem initialized
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.090000] usbcore: registered new interface driver usbfs
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.090000] usbcore: registered new interface driver hub
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.100000] usbcore: registered new device driver usb
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.560000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.560000] ehci-platform ehci-platform: Generic Platform EHCI Controller
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.570000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.610000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.630000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.630000] hub 1-0:1.0: USB hub found
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.640000] hub 1-0:1.0: 1 port detected
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.690000] Initializing USB Mass Storage driver...
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.690000] usbcore: registered new interface driver usb-storage
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.700000] USB Mass Storage support registered.
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.960000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Jan  1 01:00:37 kuciapa kern.info kernel: [   10.110000] scsi0 : usb-storage 1-1:1.0
Jan  1 01:00:37 kuciapa kern.info kernel: [   10.120000] scsi1 : usb-storage 1-1:1.1
Jan  1 01:00:37 kuciapa kern.notice kernel: [   11.110000] scsi 0:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Jan  1 01:00:37 kuciapa kern.notice kernel: [   11.120000] scsi 1:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
Jan  1 01:00:37 kuciapa kern.notice kernel: [   11.130000] sd 1:0:0:0: [sda] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
Jan  1 01:00:37 kuciapa kern.notice kernel: [   11.140000] sd 1:0:0:0: [sda] Write Protect is off
Jan  1 01:00:37 kuciapa kern.debug kernel: [   11.150000] sd 1:0:0:0: [sda] Mode Sense: 0f 00 00 00
Jan  1 01:00:37 kuciapa kern.notice kernel: [   11.150000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  1 01:00:37 kuciapa kern.info kernel: [   11.170000]  sda: sda1
Jan  1 01:00:37 kuciapa kern.notice kernel: [   11.180000] sd 1:0:0:0: [sda] Attached SCSI removable disk
Jan  1 01:00:37 kuciapa kern.info kernel: [   30.630000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
Jan  1 01:00:37 kuciapa kern.info kernel: [   30.640000] Backport based on wireless-testing.git master-2012-09-07
Jan  1 01:00:37 kuciapa kern.info kernel: [   30.640000] compat.git: wireless-testing.git
Jan  1 01:00:37 kuciapa kern.info kernel: [   30.790000] cfg80211: Calling CRDA to update world regulatory domain
Jan  1 01:00:37 kuciapa kern.info kernel: [   30.790000] cfg80211: World regulatory domain updated:
Jan  1 01:00:37 kuciapa kern.info kernel: [   30.800000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 01:00:39 kuciapa user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
Jan  1 01:00:39 kuciapa user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:00:39 kuciapa user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/12d1:14fe for mode switching
Jan  1 01:00:39 kuciapa syslog.notice usb_modeswitch: switching device 12d1:14fe on 001/002
Jan  1 01:00:39 kuciapa kern.info kernel: [   39.970000] usb 1-1: USB disconnect, device number 2
Jan  1 01:00:39 kuciapa kern.notice kernel: [   39.970000] sd 1:0:0:0: [sda] Synchronizing SCSI cache
Jan  1 01:00:39 kuciapa kern.info kernel: [   39.980000] sd 1:0:0:0: [sda]  Result: hostbyte=0x01 driverbyte=0x00
Jan  1 01:00:40 kuciapa kern.info kernel: [   40.580000] device eth1 entered promiscuous mode
Jan  1 01:00:40 kuciapa daemon.notice netifd: Interface 'lan' is now up
Jan  1 01:00:40 kuciapa daemon.notice netifd: Interface 'loopback' is now up
Jan  1 01:00:40 kuciapa daemon.notice netifd: Interface 'wan' is now down
Jan  1 01:00:41 kuciapa kern.info kernel: [   41.180000] eth1: link up (1000Mbps/Full duplex)
Jan  1 01:00:41 kuciapa kern.info kernel: [   41.180000] br-lan: port 1(eth1) entered forwarding state
Jan  1 01:00:41 kuciapa kern.info kernel: [   41.190000] br-lan: port 1(eth1) entered forwarding state
Jan  1 01:00:41 kuciapa user.notice ifup: Enabling Router Solicitations on lan (br-lan)
Jan  1 01:00:43 kuciapa kern.info kernel: [   43.190000] br-lan: port 1(eth1) entered forwarding state
Mar 10 00:00:01 kuciapa kern.info kernel: [   45.690000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Mar 10 00:00:01 kuciapa kern.info kernel: [   45.860000] option 1-1:1.0: GSM modem (1-port) converter detected
Mar 10 00:00:01 kuciapa kern.info kernel: [   45.860000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Mar 10 00:00:01 kuciapa kern.info kernel: [   45.880000] usb 1-1: MAC-Address: 0x58:0x2c:0x80:0x13:0x92:0x63
Mar 10 00:00:01 kuciapa kern.info kernel: [   45.880000] cdc_ncm 1-1:1.1: wwan0: register 'cdc_ncm' at usb-ehci-platform-1, Mobile Broadband Network Device, 58:2c:80:13:92:63
Mar 10 00:00:01 kuciapa kern.info kernel: [   45.900000] option 1-1:1.2: GSM modem (1-port) converter detected
Mar 10 00:00:01 kuciapa kern.info kernel: [   45.900000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Mar 10 00:00:01 kuciapa kern.info kernel: [   45.910000] option 1-1:1.3: GSM modem (1-port) converter detected
Mar 10 00:00:01 kuciapa kern.info kernel: [   45.920000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
Mar 10 00:00:01 kuciapa kern.info kernel: [   45.930000] scsi2 : usb-storage 1-1:1.4
Mar 10 00:00:02 kuciapa user.info sysinit: Loading defaults
Mar 10 00:00:02 kuciapa kern.notice kernel: [   46.940000] scsi 2:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
Mar 10 00:00:02 kuciapa kern.notice kernel: [   46.950000] sd 2:0:0:0: [sda] Attached SCSI removable disk
Mar 10 00:00:03 kuciapa user.info sysinit: Loading synflood protection
Mar 10 00:00:03 kuciapa user.info sysinit: Adding custom chains
Mar 10 00:00:03 kuciapa user.info sysinit: Loading zones
Mar 10 00:00:04 kuciapa user.info sysinit: Loading forwardings
Mar 10 00:00:04 kuciapa user.info sysinit: Loading rules
Mar 10 00:00:04 kuciapa user.info sysinit: Loading redirects
Mar 10 00:00:04 kuciapa user.info sysinit: Loading includes
Mar 10 00:00:05 kuciapa user.info sysinit: Optimizing conntrack
Mar 10 00:00:05 kuciapa user.info sysinit: Loading interfaces
Mar 10 00:00:05 kuciapa user.info firewall: adding lan (br-lan) to zone lan
Mar 10 00:00:06 kuciapa authpriv.info dropbear[1221]: Running in background
Mar 10 00:00:07 kuciapa daemon.warn httpd_gargoyle[1246]: started as root without requesting chroot(), warning only
Mar 10 00:00:07 kuciapa daemon.notice httpd_gargoyle[1246]: httpd_gargoyle/1.0 14mar2008 starting on kuciapa, port 80
Mar 10 00:00:07 kuciapa user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Mar 10 00:00:07 kuciapa user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Mar 10 00:00:08 kuciapa user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override
Mar 10 00:00:08 kuciapa daemon.info dnsmasq[1278]: started, version 2.62 cachesize 150
Mar 10 00:00:08 kuciapa daemon.info dnsmasq[1278]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Mar 10 00:00:08 kuciapa daemon.info dnsmasq[1278]: using local addresses only for domain lan
Mar 10 00:00:08 kuciapa daemon.info dnsmasq[1278]: reading /tmp/resolv.conf.auto
Mar 10 00:00:08 kuciapa daemon.warn dnsmasq[1278]: ignoring nameserver 192.168.254.2 - local interface
Mar 10 00:00:08 kuciapa daemon.info dnsmasq[1278]: using local addresses only for domain lan
Mar 10 00:00:08 kuciapa daemon.info dnsmasq[1278]: read /etc/hosts - 3 addresses
Mar 10 00:00:09 kuciapa user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Mar 10 00:00:09 kuciapa user.info sysinit: (Did you specify correct configuration file path?)
Mar 10 00:00:09 kuciapa user.info sysinit: setting up led WAN
Mar 10 00:00:09 kuciapa user.info sysinit: setting up led LAN1
Mar 10 00:00:09 kuciapa user.info sysinit: setting up led LAN2
Mar 10 00:00:09 kuciapa user.info sysinit: setting up led LAN3
Mar 10 00:00:09 kuciapa user.info sysinit: setting up led LAN4
Mar 10 00:00:09 kuciapa user.info sysinit: setting up led WLAN
Mar 10 00:00:11 kuciapa authpriv.info dropbear[1301]: Child connection from 192.168.254.13:51172
Mar 10 00:00:20 kuciapa authpriv.notice dropbear[1301]: Password auth succeeded for 'root' from 192.168.254.13:51172
Mar 10 00:00:29 kuciapa user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar 10 00:00:30 kuciapa user.notice ifup: Enabling Router Solicitations on loopback (lo)
Mar 10 00:00:35 kuciapa user.notice fstab: mount: mounting /dev/sda1 on /mnt/sda1 failed: No medium found
Mar 10 00:00:39 kuciapa user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar 10 00:00:41 kuciapa user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar 10 00:00:41 kuciapa user.notice usb-modeswitch: 1-1:1.2: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar 10 00:00:41 kuciapa user.notice usb-modeswitch: 1-1:1.3: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar 10 00:00:42 kuciapa user.notice usb-modeswitch: 1-1:1.4: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar 10 00:00:45 kuciapa daemon.notice pppd[2144]: pppd 2.4.5 started by root, uid 0
Mar 10 00:00:46 kuciapa local2.info chat[2148]: abort on (BUSY)
Mar 10 00:00:46 kuciapa local2.info chat[2148]: abort on (NO CARRIER)
Mar 10 00:00:46 kuciapa local2.info chat[2148]: abort on (ERROR)
Mar 10 00:00:46 kuciapa local2.info chat[2148]: report (CONNECT)
Mar 10 00:00:46 kuciapa local2.info chat[2148]: timeout set to 10 seconds
Mar 10 00:00:46 kuciapa local2.info chat[2148]: send (AT&F^M)
Mar 10 00:00:46 kuciapa local2.info chat[2148]: expect (OK)
Mar 10 00:00:46 kuciapa local2.info chat[2148]: AT&F^M^M
Mar 10 00:00:46 kuciapa local2.info chat[2148]: OK
Mar 10 00:00:46 kuciapa local2.info chat[2148]:  -- got it
Mar 10 00:00:46 kuciapa local2.info chat[2148]: send (ATE1^M)
Mar 10 00:00:46 kuciapa local2.info chat[2148]: expect (OK)
Mar 10 00:00:46 kuciapa local2.info chat[2148]: ^M
Mar 10 00:00:46 kuciapa local2.info chat[2148]: ATE1^M^M
Mar 10 00:00:46 kuciapa local2.info chat[2148]: OK
Mar 10 00:00:46 kuciapa local2.info chat[2148]:  -- got it
Mar 10 00:00:46 kuciapa local2.info chat[2148]: send (AT+CGDCONT=1,"IP","darmowy"^M)
Mar 10 00:00:46 kuciapa local2.info chat[2148]: timeout set to 30 seconds
Mar 10 00:00:46 kuciapa local2.info chat[2148]: expect (OK)
Mar 10 00:00:46 kuciapa local2.info chat[2148]: ^M
Mar 10 00:00:46 kuciapa local2.info chat[2148]: AT+CGDCONT=1,"IP","darmowy"^M^M
Mar 10 00:00:46 kuciapa local2.info chat[2148]: OK
Mar 10 00:00:46 kuciapa local2.info chat[2148]:  -- got it
Mar 10 00:00:46 kuciapa local2.info chat[2148]: send (ATD*99***1#^M)
Mar 10 00:00:46 kuciapa local2.info chat[2148]: expect (CONNECT)
Mar 10 00:00:46 kuciapa local2.info chat[2148]: ^M
Mar 10 00:00:46 kuciapa local2.info chat[2148]: ATD*99***1#^M^M
Mar 10 00:00:46 kuciapa local2.info chat[2148]: CONNECT
Mar 10 00:00:46 kuciapa local2.info chat[2148]:  -- got it
Mar 10 00:00:46 kuciapa local2.info chat[2148]: send ( ^M)
Mar 10 00:00:46 kuciapa daemon.info pppd[2144]: Serial connection established.
Mar 10 00:00:46 kuciapa daemon.info pppd[2144]: Using interface 3g-wan
Mar 10 00:00:46 kuciapa daemon.notice pppd[2144]: Connect: 3g-wan <--> /dev/ttyUSB0
Mar 10 00:00:50 kuciapa daemon.warn pppd[2144]: Could not determine remote IP address: defaulting to 10.64.64.64
Mar 10 00:00:50 kuciapa daemon.notice pppd[2144]: local  IP address 151.248.35.37
Mar 10 00:00:50 kuciapa daemon.notice pppd[2144]: remote IP address 10.64.64.64
Mar 10 00:00:50 kuciapa daemon.notice pppd[2144]: primary   DNS address 193.41.112.14
Mar 10 00:00:50 kuciapa daemon.notice pppd[2144]: secondary DNS address 193.41.112.18
Mar 10 00:00:50 kuciapa daemon.notice netifd: Interface 'wan' is now up
Mar 10 00:00:51 kuciapa user.notice ifup: Enabling Router Solicitations on wan (3g-wan)
Mar 10 00:00:52 kuciapa user.info firewall: adding wan (3g-wan) to zone wan
Mar 10 00:00:55 kuciapa daemon.info dnsmasq[1278]: reading /tmp/resolv.conf.auto
Mar 10 00:00:55 kuciapa daemon.info dnsmasq[1278]: using nameserver 193.41.112.14#53
Mar 10 00:00:55 kuciapa daemon.info dnsmasq[1278]: using nameserver 193.41.112.18#53
Mar 10 00:00:55 kuciapa daemon.warn dnsmasq[1278]: ignoring nameserver 192.168.254.2 - local interface
Mar 10 00:00:55 kuciapa daemon.info dnsmasq[1278]: using local addresses only for domain lan
Mar 10 00:00:57 kuciapa kern.warn kernel: [  101.400000] ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
Mar 10 00:00:57 kuciapa kern.warn kernel: [  101.400000]                old minutes west=0, new minutes west=-60
Success

Hmm... Jestem, święcie przekonany że wczorajszy zabieg poszedł na marne, więc ponowna szybka instalacja picocom i wywołanie komend:

AT^SETPORT? 
^SETPORT=A1,A2;1,16,3,2,A2
OK

i

AT^SYSCFG?
^SYSCFG:2,2,3FFFFFFF,1,2
OK

Wniosek? Modem pamięta ustawienia, więc nie mam pojęcia dlaczego w logach mam CD-ROM. Ok, może to nie istotne, bo mam też:

...
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.690000] Initializing USB Mass Storage driver...
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.690000] usbcore: registered new interface driver usb-storage
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.700000] USB Mass Storage support registered.
Jan  1 01:00:37 kuciapa kern.info kernel: [    9.960000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Jan  1 01:00:37 kuciapa kern.info kernel: [   10.110000] scsi0 : usb-storage 1-1:1.0
Jan  1 01:00:37 kuciapa kern.info kernel: [   10.120000] scsi1 : usb-storage 1-1:1.1
Jan  1 01:00:37 kuciapa kern.notice kernel: [   11.110000] scsi 0:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Jan  1 01:00:37 kuciapa kern.notice kernel: [   11.120000] scsi 1:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
Jan  1 01:00:37 kuciapa kern.notice kernel: [   11.130000] sd 1:0:0:0: [sda] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
Jan  1 01:00:37 kuciapa kern.notice kernel: [   11.140000] sd 1:0:0:0: [sda] Write Protect is off
Jan  1 01:00:37 kuciapa kern.debug kernel: [   11.150000] sd 1:0:0:0: [sda] Mode Sense: 0f 00 00 00
Jan  1 01:00:37 kuciapa kern.notice kernel: [   11.150000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  1 01:00:37 kuciapa kern.info kernel: [   11.170000]  sda: sda1
Jan  1 01:00:37 kuciapa kern.notice kernel: [   11.180000] sd 1:0:0:0: [sda] Attached SCSI removable disk
...

co ewidentnie mówi że sda1 jest zamontowane. Później jest:

Jan  1 01:00:39 kuciapa user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
Jan  1 01:00:39 kuciapa user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Jan  1 01:00:39 kuciapa user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/12d1:14fe for mode switching
Jan  1 01:00:39 kuciapa syslog.notice usb_modeswitch: switching device 12d1:14fe on 001/002
Jan  1 01:00:39 kuciapa kern.info kernel: [   39.970000] usb 1-1: USB disconnect, device number 2
Jan  1 01:00:39 kuciapa kern.notice kernel: [   39.970000] sd 1:0:0:0: [sda] Synchronizing SCSI cache
Jan  1 01:00:39 kuciapa kern.info kernel: [   39.980000] sd 1:0:0:0: [sda]  Result: hostbyte=0x01 driverbyte=0x00

i mam wrażenie że usb-modeswitch właśnie miesza...
Mylę się czy nie? Czarek? Ty tu jesteś "miszczem":)

17 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,013

Odp: gargoyle i extroot

E3131s-2, setport nie powoduje przełączenia modemu! Tylko robi wyłączenie interfejsów. Kilka razy to już było.

Pisałem. Nie na naklejce tylko na plastiku tak gdzie się sim wkłada. Zrób fotkę to Ci pokażę gdzie.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

18 Odpowiedź przez plesken

  • Zarejestrowany: 2007-03-23
  • Posty: 48

Odp: gargoyle i extroot

Cezary napisał/a:

E3131s-2, setport nie powoduje przełączenia modemu! Tylko robi wyłączenie interfejsów. Kilka razy to już było.

Pisałem. Nie na naklejce tylko na plastiku tak gdzie się sim wkłada. Zrób fotkę to Ci pokażę gdzie.

Spoko. Oto obrazki:

http://sd-xbmc.org/xbmc/img/img1.jpg
http://sd-xbmc.org/xbmc/img/img2.jpg

19 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,013

Odp: gargoyle i extroot

Wyjmij sim i pod nim zobacz napisy. Dokładnie w tym miejscu gdzie sim wystaje.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

20 Odpowiedź przez plesken

  • Zarejestrowany: 2007-03-23
  • Posty: 48

Odp: gargoyle i extroot

No to ewidentnie e3131s-2. Czyli to co do tej pory robiłem było w większości "prawie" słuszne smile
Czarek, to co z tym fantem dalej?

Zmieniając temat to zauważyłem że jak wpisze eko.one.pl to często przełącza na onet.pl - macie tak samo?

21 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,013

Odp: gargoyle i extroot

Jak wpiszesz eko.onet.pl to tak się dzieje.

Używanie e3131s-2 jako extroota masz opisane  na eko.one.pl. Warunek - karta musi być dostępna, a ty masz z tym problem.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

22 Odpowiedź przez plesken

  • Zarejestrowany: 2007-03-23
  • Posty: 48

Odp: gargoyle i extroot

No właśnie... Według mnie ona jest montowana i odmontowywana... Dlatego też zwróciłem się na tym forum. Nie ukrywajmy, ale w openwrt masz o niebo lepsze doświadczenie niż ja, bo ja tylko z doskoku smile
Czyli, najlepszą drogą jest zakupienie huba usb i osobno pendrive i modem tak?

23 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,013

Odp: gargoyle i extroot

Zmien kartę w modemie na inną i zobacz.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

24 Odpowiedź przez plesken (edytowany przez plesken 2013-03-10 12:51:37)

  • Zarejestrowany: 2007-03-23
  • Posty: 48

Odp: gargoyle i extroot

Czary i dziwy. Poprzednia karta, której też nie widział, teraz jest nagle widoczna. Porobię testy w sensie resety co pewien czas, aby wykluczyć jakąś nie miłą niespodziankę i wtedy zacznę bawić się extrootem.

Dobra, to jest totolotek. Raz widzi, raz nie. Czarek co w tym przypadku proponujesz? Huba usb?

25 Odpowiedź przez plesken

  • Zarejestrowany: 2007-03-23
  • Posty: 48

Odp: gargoyle i extroot

Znalazłem chwilę czasu aby dalej drążyć temat. Wywaliłem usb_modeswitch i oczywiście przestał mi łączyć się z netem przez modem usb. Kartę usb widzi aż miło smile.
Rozumiem że aby połączyć z netem to muszę przełączyć usb w tryb modemu i dopiero wykonać ifup wan?
Po takim przełączeniu oczywiście odłącza kartę. Jako że sieć jest z aero2 to co godzinę następuje "reconnect". Macie jakiś patent aby "zachować" zamontowane dyski podczas przełączenia modemu? Przypomnę że modem to huawei e3131s-2. Z tego co Czarek mówił/pisał to chyba nie da się go włączyć na stałe.
Może napisać skrypt który by sprawdzał czy jest połączenie a jeżeli nie to odmontowywał dysk, wracał do systemu z flasha, a przy udanym połączeniu montował znowu cały filesystem... Wiem kombinuję smile
Jakieś porady?