Temat: sieć adhoc
Witam,
Próbuję skomunikowac dwa tp-linki w trybie ad-hoc. Dnsmasq i firewall wylaczony, interfejs wan wyłączony. Wifi w obu urządzeniach ustawione na kanał 5, bez szyfrowania. IP w tej samej klasie.
Urządzenia widzą się "w warstwie drugiej", natomiast ping nie działa...
Po wykonaniu
iw wlan0 station dumpmam:
Station 76:ea:3a:be:8c:e7 (on wlan0)
inactive time: 70 ms
rx bytes: 596295
rx packets: 9392
tx bytes: 30
tx packets: 1
tx retries: 0
tx failed: 0
signal: -25 [-25] dBm
signal avg: -24 [-24] dBm
tx bitrate: 1.0 MBit/s
rx bitrate: 1.0 MBit/s
authorized: yes
authenticated: yes
preamble: long
WMM/WME: yes
MFP: no
TDLS peer: nozawartość konfigów:
root@OpenWrt:/# cat /etc/config/wireless
config wifi-device radio0
option type mac80211
option channel 5
option macaddr b0:48:7a:d9:81:88
option hwmode 11ng
option htmode HT20
list ht_capab SHORT-GI-40
list ht_capab TX-STBC
list ht_capab RX-STBC1
list ht_capab DSSS_CCK-40
config wifi-iface
option device radio0
option network lan
option mode adhoc
option ssid tesst
option encryption none
root@OpenWrt:/# cat /etc/config/network
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config interface 'lan'
option ifname 'eth0'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.1.3'
option netmask '255.255.255.0'
option gateway '192.168.1.1'
#config interface 'wan'
# option ifname 'eth1'
# option proto 'dhcp'
config switch
option name 'eth0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'eth0'
option vlan '1'
option ports '0 1 2 3 4'Ah, zapomniałbym - Openwrt AA, z buildów Cezarego
