fdisk /dev/sda

The number of cylinders for this disk is set to 24321.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): p

Disk /dev/sda: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xdd4cdd4c

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1       24321   195358401   83  Linux

Command (m for help): q

root@Gargoyle:~$ fdisk /dev/sdb

Command (m for help): p

Disk /dev/sdb (Sun disk label): 31 heads, 61 sectors, 1020 cylinders
Units = cylinders of 1891 * 512 bytes

   Device Flag    Start       End    Blocks   Id  System

Command (m for help):

sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access     Mass     Storage Device        PQ: 0 ANSI: 0 CCS
usb-storage: device scan complete
sd 1:0:0:0: [sdb] 1930239 512-byte logical blocks: (988 MB/942 MiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] Assuming drive cache: write through
 sdb: unknown partition table
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] Attached SCSI removable disk