51

Odp: Wsparcie dla QMI

frutis napisał/a:

A jakie prędkości uzyskujesz mając modem podpięty bezpośredni do komputera?

Czy po nawiązaniu połączenie przy użyciu biblioteki libqmi jest ono utrzymywane (ponowne połączenie w przypadku rozłączenia)?

prędkości z kompa to mam ok. 12 Mb, ale to są wartości nieporównywalne, bo
- router stoi na strychu od strony zawietrznej w stosunku do btsa (z pokoju z kompem jest dużo lepsza "widoczność" btsa)
- testuję łącząc się po wifi ze starego laptopa, który ma często problem z połączeniem 10Mb z wpa2

co do zrywania połączenia, to nie wiem jak to wygląda, ale w przypadku problemów można sobie skrobnąć prosty skrypt do crona, który będzie ściągał coś małego regularnie wgetem (u mnie pingi działają, ale Cezary pisał, że czasami plus coś przycina), a w przypadku problemów podnosił połączenie.

52

Odp: Wsparcie dla QMI

Plus nie daje pingów dla niektórych klas adresowych.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

53

Odp: Wsparcie dla QMI

test z routera (wychodzi ok. 1MB/s wliczając czas potrzeby na zestawienie połaćżenia)

$time wget http://noc.gts.pl/10mb.gts -O - >/dev/null
Connecting to noc.gts.pl (217.153.108.10:80)
-                    100% |*******************************| 10000k  0:00:00 ETA
real    0m 10.78s
user    0m 0.02s
sys     0m 0.08s

speedtest.net - 4,5Mb/s

54

Odp: Wsparcie dla QMI

niestety moduł jest trochę niestabilny (dmesg poniżej). znika /dev/cdc-wdm0. pomaga rmmod cdc-wdm i qmi_wwan oraz ponowny insmod.

[18446.410000] ------------[ cut here ]------------
[18446.420000] WARNING: at /home/cezary/projekty/openwrt/ar71xx-attitude-adjustment/build_dir/linux-ar71xx_generic/compat-wireless-2012-09-07/net/mac80211/rx.c:3087 0x80dd9fd0()
[18446.430000] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 77 (0x4d)
[18446.440000] Modules linked in: option qmi_wwan usb_wwan cdc_wdm usbserial usbnet lm75 i2c_dev ath79_wdt ledtrig_usbdev ledtrig_netdev nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables hwmon ppp_async ppp_generic slhc vfat fat ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) nls_iso8859_1 nls_cp437 mac80211(O) crc_ccitt cfg80211(O) compat(O) arc4 aes_generic usb_storage ohci_hcd ehci_hcd sd_mod ext4 jbd2 mbcache usbcore usb_common scsi_mod nls_base crc16 crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O)
[18446.520000] Call Trace:[<802802d8>] 0x802802d8
[18446.520000] [<802802d8>] 0x802802d8
[18446.520000] [<80071a0c>] 0x80071a0c
[18446.530000] [<80dd9fd0>] 0x80dd9fd0
[18446.530000] [<80071ac0>] 0x80071ac0
[18446.530000] [<80dd9fd0>] 0x80dd9fd0
[18446.540000] [<801de138>] 0x801de138
[18446.540000] [<801df5c4>] 0x801df5c4
[18446.540000] [<80d66eb0>] 0x80d66eb0
[18446.550000] [<81bf4c48>] 0x81bf4c48
[18446.550000] [<80d64fd8>] 0x80d64fd8
[18446.560000] [<80076af0>] 0x80076af0
[18446.560000] [<80077014>] 0x80077014
[18446.560000] [<80310000>] 0x80310000
[18446.570000] [<80310000>] 0x80310000
[18446.570000] [<80077220>] 0x80077220
[18446.570000] [<800a84c0>] 0x800a84c0
[18446.580000] [<80077454>] 0x80077454
[18446.580000] [<800630ec>] 0x800630ec
[18446.580000] [<800632c0>] 0x800632c0
[18446.590000] [<80310000>] 0x80310000
[18446.590000] [<80095210>] 0x80095210
[18446.590000] [<80064b28>] 0x80064b28
[18446.600000] [<800632e0>] 0x800632e0
[18446.600000] [<802ec8b0>] 0x802ec8b0
[18446.600000] [<802ec0dc>] 0x802ec0dc
[18446.610000]
[18446.610000] ---[ end trace 2e159170b6cd0222 ]---
[18447.930000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18448.410000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18449.110000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18450.510000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18453.540000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18462.660000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18472.630000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18472.870000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18473.580000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18474.770000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18477.100000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18477.570000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18478.740000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18479.220000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18479.690000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18481.090000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18482.030000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18482.970000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18484.140000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18485.130000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18486.070000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18487.240000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18488.170000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18489.110000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18490.280000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18491.220000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18492.160000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18493.330000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18494.270000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18495.200000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18496.370000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18497.310000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18498.250000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18499.420000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18500.360000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18501.300000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18502.460000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18503.400000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18504.340000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18505.510000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18506.450000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18507.620000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18508.560000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18509.260000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18509.510000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18510.440000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18511.610000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[18512.550000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[61571.010000] ------------[ cut here ]------------
[61571.010000] WARNING: at net/sched/sch_generic.c:256 0x801fdbd0()
[61571.020000] NETDEV WATCHDOG: wwan0 (qmi_wwan): transmit queue 0 timed out
[61571.020000] Modules linked in: option qmi_wwan usb_wwan cdc_wdm usbserial usbnet lm75 i2c_dev ath79_wdt ledtrig_usbdev ledtrig_netdev nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables hwmon ppp_async ppp_generic slhc vfat fat ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) nls_iso8859_1 nls_cp437 mac80211(O) crc_ccitt cfg80211(O) compat(O) arc4 aes_generic usb_storage ohci_hcd ehci_hcd sd_mod ext4 jbd2 mbcache usbcore usb_common scsi_mod nls_base crc16 crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O)
[61571.090000] Call Trace:[<802802d8>] 0x802802d8
[61571.100000] [<802802d8>] 0x802802d8
[61571.100000] [<80071a0c>] 0x80071a0c
[61571.110000] [<801fdbd0>] 0x801fdbd0
[61571.110000] [<80071ac0>] 0x80071ac0
[61571.110000] [<80d6058c>] 0x80d6058c
[61571.120000] [<801fdbd0>] 0x801fdbd0
[61571.120000] [<801fda60>] 0x801fda60
[61571.120000] [<8007c50c>] 0x8007c50c
[61571.130000] [<80077014>] 0x80077014
[61571.130000] [<80310000>] 0x80310000
[61571.130000] [<80310000>] 0x80310000
[61571.140000] [<80077220>] 0x80077220
[61571.140000] [<800a84c0>] 0x800a84c0
[61571.140000] [<80077454>] 0x80077454
[61571.150000] [<800630ec>] 0x800630ec
[61571.150000] [<80310000>] 0x80310000
[61571.160000] [<800632c0>] 0x800632c0
[61571.160000] [<80310000>] 0x80310000
[61571.160000] [<80095210>] 0x80095210
[61571.170000] [<800a8210>] 0x800a8210
[61571.170000] [<80064b28>] 0x80064b28
[61571.170000] [<800632e0>] 0x800632e0
[61571.180000] [<802ec8b0>] 0x802ec8b0
[61571.180000] [<802ec0dc>] 0x802ec0dc
[61571.180000]
[61571.180000] ---[ end trace 2e159170b6cd0223 ]---

55

Odp: Wsparcie dla QMI

Ale to nie qmi tylko wifi Ci się wywaliło.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

56

Odp: Wsparcie dla QMI

hmm, fakt smile
to jedyne logi do które widać w dmesgu, ale urządzenia cdc-wdm0 nie było hmm

57

Odp: Wsparcie dla QMI

Ten błąd jest zgłoszony na dev.openwrt.org. ale nie wiele na razie zrobili w tym kierunku.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

58

Odp: Wsparcie dla QMI

Cezary napisał/a:

@trofim: dla 1043 sprawdź sobie to, ma już qmi wkompilowane: http://ecco.selfip.net/test/modem-sysupgrade.bin

Cezary, czy można umieścić .config plik? Próbuję skompilować dla Ralink rf305x. Ale nie wydaje /dev/cdc-wdm, choć dobrze-ins qmi-wwan i cdc-wdm idzie normalnie. Myślę, że czegoś brakuje. Dziękuję.

59

Odp: Wsparcie dla QMI

Bo w openwrt nie ma qmi domyślnie. Używasz trunka czy aa?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

60

Odp: Wsparcie dla QMI

Cezary napisał/a:

Bo w openwrt nie ma qmi domyślnie. Używasz trunka czy aa?

Dodałem dobrze qmi-wwan ręcznie. Wszystkie zebrane. AA Trunk nie jest używany. Próbować

61

Odp: Wsparcie dla QMI

http://ecco.selfip.net/attitude_adjustm … config_usb

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

62

Odp: Wsparcie dla QMI

Dziękuję. Próbować smile

63 (edytowany przez wrt-user 2012-12-02 21:53:25)

Odp: Wsparcie dla QMI

@Cezary, czy można znaleźć twoje pliki Makefile gdzieś online? Mógłbyś udostępnić Makefile dla libqmi 1.0, bo męcze się z kompilowaniem i jakoś nie mogę przebrnąć przez błedy.
pozdrawiam i dzięki

64

Odp: Wsparcie dla QMI

http://ecco.selfip.net/test/src/libqmi/

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

65

Odp: Wsparcie dla QMI

Dzięki ale twój niewiele się różni od tego którego używałem, do tej pory.

diff -uN Makefile Makefile.cj
--- Makefile    2012-12-02 22:32:57.615354387 +0100
+++ Makefile.cj    2012-12-02 22:22:20.155354953 +0100
@@ -9,11 +9,11 @@
 
 PKG_NAME:=libqmi-glib
 PKG_VERSION:=1.0
-PKG_RELEASE:=1
+PKG_RELEASE:=1cj
 
-PKG_BUILD_DIR:=$(BUILD_DIR)/libqmi-$(PKG_VERSION)
 PKG_SOURCE:=libqmi-$(PKG_VERSION).tar.xz
-PKG_SOURCE_URL:=@GNOME/libqmi/$(PKG_VERSION)/
+PKG_SOURCE_URL:=@GNOME/libqmi/1.0/
+PKG_BUILD_DIR:=$(BUILD_DIR)/libqmi-$(PKG_VERSION)
 
 PKG_FIXUP:=autoreconf
 PKG_INSTALL:=1

Niestety u mnie żali się o libffi.so.5

66

Odp: Wsparcie dla QMI

To biblioteka, standardowo w openwrt jest.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

67

Odp: Wsparcie dla QMI

to ja wiem, tylko nie wiem dlaczego libqmi mi się o nią czepia skoro np. glib2 (2.34.3) się kompiluje i też jej wymaga (mam libffi 3.0.11).

/home/openwrt/openwrt/openwrt_trunk/staging_dir/toolchain-mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.6.4/../../../../mips-openwrt-linux-uclibc/bin/ld: warning: libffi.so.5, needed by /home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libgio-2.0.so, not found (try using -rpath or -rpath-link)
/home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libgobject-2.0.so: undefined reference to `ffi_type_void'
/home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libgobject-2.0.so: undefined reference to `ffi_type_double'
/home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libgobject-2.0.so: undefined reference to `ffi_prep_cif'
/home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libgobject-2.0.so: undefined reference to `ffi_type_sint32'
/home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libgobject-2.0.so: undefined reference to `ffi_type_float'
/home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libgobject-2.0.so: undefined reference to `ffi_type_uint64'
/home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libgobject-2.0.so: undefined reference to `ffi_type_sint64'
/home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libgobject-2.0.so: undefined reference to `ffi_type_pointer'
/home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libgobject-2.0.so: undefined reference to `ffi_type_uint32'
/home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libgobject-2.0.so: undefined reference to `ffi_call'
collect2: ld returned 1 exit status
make[7]: *** [test-utils] Error 1

68

Odp: Wsparcie dla QMI

No dokładnie. Skompilowało się w ogóle libffi?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

69

Odp: Wsparcie dla QMI

tak:

ls -al /home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libf*
-rw-r--r-- 1 openwrt openwrt  50540 Dec  1 15:42 /home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libffi.a
lrwxrwxrwx 1 openwrt openwrt     15 Dec  1 15:42 /home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libffi.so -> libffi.so.6.0.0
lrwxrwxrwx 1 openwrt openwrt     15 Dec  1 15:42 /home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libffi.so.6 -> libffi.so.6.0.0
-rwxr-xr-x 1 openwrt openwrt  35372 Dec  1 15:42 /home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libffi.so.6.0.0
-rw-r--r-- 1 openwrt openwrt 120622 Dec  1 01:21 /home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libform.a
lrwxrwxrwx 1 openwrt openwrt     12 Dec  1 01:21 /home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libform.so -> libform.so.5
lrwxrwxrwx 1 openwrt openwrt     14 Dec  1 01:21 /home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libform.so.5 -> libform.so.5.7
-rwxr-xr-x 1 openwrt openwrt  67300 Dec  1 01:21 /home/openwrt/openwrt/openwrt_trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib/libform.so.5.7

70

Odp: Wsparcie dla QMI

Ale on chce .5 a ty masz .6

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

71

Odp: Wsparcie dla QMI

make package/libqmi-glib/clean może najpierw zrób.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

72

Odp: Wsparcie dla QMI

Cezary napisał/a:

Ale on chce .5 a ty masz .6

dzięki, jak mogłem tego nie zauważyć.

Cezary napisał/a:

make package/libqmi-glib/clean może najpierw zrób.

zrobiłem make package/libs/libqmi-glib/clean ale niestety nie pomogło.

Postanowiłem wystartować na nowo z wersją z svn i tym razem poszło bez problemu.

dzięki wielkie za pomoc.

Właśnie testuję k5005, przeflashowany na e398.

73

Odp: Wsparcie dla QMI

Cezary, jasne, problem ze sterownikiem qmi-wwan
Zgromadzeni, aby promować wizerunek qmi-wwan, cdc-wdm dla Ralink. OpeWRT AA, kernel 3.3.8, Sterownik nie jest załadowany. Insmod nie pomaga. Myślę, że problem z ralinkom. Wziął TP-link mr3020.Skompilowal. Ten sam problem. Źródła z jądra zajęło 3.04.20 Dokonane poprawki qmi-wwan.c, cdc-wdm.c , cdc-wdm.h, usbnet.c (?) dla obrazów?


lsmod

root@OpenWrt:/# lsmod
Module                  Size  Used by    Tainted: G  
option                 14992  0 
usb_wwan                6560  1 option
cdc_wdm                 7072  0 
usbserial              23792  2 option,usb_wwan
usbnet                 12032  0 
ath79_wdt               2240  1

cat /proc/bus/usb/devices

root@OpenWrt:~# cat /proc/bus/usb/devices

....
P:  Vendor=12d1 ProdID=1506 Rev= 0.00
S:  Manufacturer=Huawei Technologies
S:  Product=HUAWEI Mobile
C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=02 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=03 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=01 Prot=09 Driver=cdc_wdm
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=08 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
....

dmesg

[   34.990000] usbcore: registered new interface driver usbserial
[   34.990000] USB Serial support registered for generic
[   35.000000] usbcore: registered new interface driver usbserial_generic
[   35.010000] usbserial: USB Serial Driver core
[   35.040000] cdc_wdm 1-1:1.3: Ignoring extra header, type 15, length 13
[   35.050000] cdc_wdm 1-1:1.3: Ignoring extra header, type 6, length 5
[   35.050000] cdc_wdm 1-1:1.3: cdc-wdm0: USB WDM device
[   35.060000] usbcore: registered new interface driver cdc_wdm
[   35.100000] USB Serial support registered for GSM modem (1-port)
[   35.100000] option 1-1:1.0: GSM modem (1-port) converter detected

opkg list-installed

root@OpenWrt:/# opkg list-installed
......
kmod-qmi-wwan - 3.3.8-1
kmod-scsi-core - 3.3.8-1
kmod-usb-core - 3.3.8-1
kmod-usb-net - 3.3.8-1
kmod-usb-ohci - 3.3.8-1
kmod-usb-serial - 3.3.8-1
kmod-usb-serial-option - 3.3.8-1
kmod-usb-serial-wwan - 3.3.8-1
kmod-usb-storage - 3.3.8-1
kmod-usb-uhci - 3.3.8-1
kmod-usb-wdm - 3.3.8-1
kmod-usb2 - 3.3.8-1
.....

Powiedz mi, jaki jest twój sekret?:)

74

Odp: Wsparcie dla QMI

A gdzie masz qmi-wwan? Jest załadowany?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

75 (edytowany przez rusink 2012-12-09 09:06:49)

Odp: Wsparcie dla QMI

Cezary napisał/a:

A gdzie masz qmi-wwan? Jest załadowany?

Cholera jasna! Driver naprawdę nie był /lib/modules/3.3.8.  Zauważyłem. sad  Skompilowana. Postaram się dalej. Dzięki! smile

UPD Ralink rt3052 działa! Będę go przetestować. Jeszcze raz dziękuję! smile