• Zarejestrowany: 2010-02-04
  • Posty: 204

Temat: AA i motion

Pierwszy raz próbuję zainstalować webcam.
Moja kamerka to
Moduły poprawnie się ładują:

[   47.132000] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (090c:037b)
[   47.148000] input: USB 2.0 PC Cam as /devices/ssb0:1/ohci-platform.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input0
[   47.160000] usbcore: registered new interface driver uvcvideo
[   47.164000] USB Video Class driver (1.1.1)

Zainstalowałem motion, próbuję uruchomić i dostaję.

[0] [NTC] [ALL] [Nov 22 12:03:14] motion_startup: Using log type (ALL) log level (NTC)
[0] [NTC] [ALL] [Nov 22 12:03:14] main: Thread 1 is from /etc/motion.conf
[0] [NTC] [ALL] [Nov 22 12:03:14] main: Thread 1 is device: /dev/video0 input -1
[0] [NTC] [ALL] [Nov 22 12:03:14] main: Stream port 8081
[0] [NTC] [STR] [Nov 22 12:03:14] httpd_run: motion-httpd testing : IPV4 addr: 127.0.0.1 port: 8080
[0] [NTC] [STR] [Nov 22 12:03:14] httpd_run: motion-httpd Bound : IPV4 addr: 127.0.0.1 port: 8080
[0] [NTC] [ALL] [Nov 22 12:03:14] main: Waiting for threads to finish, pid: 1540
[1] [NTC] [ALL] [Nov 22 12:03:14] motion_init: Thread 1 started
[1] [NTC] [VID] [Nov 22 12:03:14] vid_v4lx_start: Using videodevice /dev/video0 and input -1
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_get_capability:
------------------------
cap.driver: "uvcvideo"
cap.card: "USB 2.0 PC Cam"
cap.bus_info: "usb-ohci-platform.0-1.3"
cap.capabilities=0x04000001
------------------------
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_get_capability: - VIDEO_CAPTURE
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_get_capability: - STREAMING
[0] [NTC] [STR] [Nov 22 12:03:14] httpd_run: motion-httpd/trunkREV528 running, accepting connections
[0] [NTC] [STR] [Nov 22 12:03:14] httpd_run: motion-httpd: waiting for data on 127.0.0.1 port TCP 8080
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_select_input: name = "Camera 1", type 0x00000002, status 00000000
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_select_input: - CAMERA
[1] [WRN] [VID] [Nov 22 12:03:14] v4l2_select_input: Device doesn't support VIDIOC_G_STD
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_set_pix_format: Config palette index 17 (YU12) doesn't work.
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_set_pix_format: Supported palettes:
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_set_pix_format: (0) YUYV (YUV 4:2:2 (YUYV))
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_set_pix_format: 0 - YUV 4:2:2 (YUYV) (compressed : 0) (0x56595559)
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_set_pix_format Selected palette YUYV
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_do_set_pix_format: Testing palette YUYV (320x240)
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_do_set_pix_format: Using palette YUYV (320x240) bytesperlines 640 sizeimage 153600 colorspace 00000000
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_scan_controls: found control 0x00980900, "Brightness", range 0,255
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_scan_controls:   "Brightness", default 128, current 128
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_scan_controls: found control 0x00980901, "Contrast", range 0,127
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_scan_controls:   "Contrast", default 34, current 34
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_scan_controls: found control 0x00980902, "Saturation", range 0,127
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_scan_controls:   "Saturation", default 40, current 40
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_scan_controls: found control 0x00980903, "Hue", range -15,15
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_scan_controls:   "Hue", default 0, current 0
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_scan_controls: found control 0x00980910, "Gamma", range 1,3
[1] [NTC] [VID] [Nov 22 12:03:14] v4l2_scan_controls:   "Gamma", default 2, current 2
[1] [NTC] [VID] [Nov 22 12:03:14] vid_v4lx_start: Using V4L2
[1] [NTC] [ALL] [Nov 22 12:03:14] image_ring_resize: Resizing pre_capture buffer to 1 items

I w tym momencie ruter się zawiesza...
Coś robię źle ?

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,354

Odp: AA i motion

Na początek - zainstaluj fswebcam i zobacz czy będzie zdjęcia robił.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez rybirek

  • Zarejestrowany: 2010-02-04
  • Posty: 204

Odp: AA i motion

Cezary napisał/a:

Na początek - zainstaluj fswebcam i zobacz czy będzie zdjęcia robił.

Niestety, ale ten sam efekt, po uruchomieniu wisi
Musi być jakiś błąd w sterowniku, poszukam innej kamerki.

1. fswebcam

--- Opening /dev/video0...
Trying source module v4l2...
/dev/video0 opened.
No input was specified, using the first.
Adjusting resolution from 384x288 to 320x240.
--- Capturing frame...

2. mjpg_streamer -i "input_uvc.so -y -r 320x240" -o "output_http.so -p 8090"

MJPG Streamer Version: svn rev: exported
 i: Using V4L2 device.: /dev/video0
 i: Desired Resolution: 320 x 240
 i: Frames Per Second.: 5
 i: Format............: YUV
 i: JPEG Quality......: 80
Adding control for Pan (relative)
UVCIOC_CTRL_ADD - Error: Invalid argument
Adding control for Tilt (relative)
UVCIOC_CTRL_ADD - Error: Invalid argument
Adding control for Pan Reset
UVCIOC_CTRL_ADD - Error: Invalid argument
Adding control for Tilt Reset
UVCIOC_CTRL_ADD - Error: Invalid argument
Adding control for Pan/tilt Reset
UVCIOC_CTRL_ADD - Error: Invalid argument
Adding control for Focus (absolute)
UVCIOC_CTRL_ADD - Error: Invalid argument
mapping control for Pan (relative)
UVCIOC_CTRL_MAP - Error: Invalid argument
mapping control for Tilt (relative)
UVCIOC_CTRL_MAP - Error: Invalid argument
mapping control for Pan Reset
UVCIOC_CTRL_MAP - Error: Invalid argument
mapping control for Tilt Reset
UVCIOC_CTRL_MAP - Error: Invalid argument
mapping control for Pan/tilt Reset
UVCIOC_CTRL_MAP - Error: Invalid argument
mapping control for Focus (absolute)
UVCIOC_CTRL_MAP - Error: Invalid argument
mapping control for LED1 Mode
UVCIOC_CTRL_MAP - Error: Invalid argument
mapping control for LED1 Frequency
UVCIOC_CTRL_MAP - Error: Invalid argument
mapping control for Disable video processing
UVCIOC_CTRL_MAP - Error: Invalid argument
mapping control for Raw bits per pixel
UVCIOC_CTRL_MAP - Error: Invalid argument
 o: www-folder-path...: disabled
 o: HTTP TCP port.....: 8090
 o: username:password.: disabled
 o: commands..........: enabled

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,354

Odp: AA i motion

Jeżeli sam fswebcam też się wiesza to faktycznie szukaj innej.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona