Temat: kamerka na openwrt
z cyklu "kolejny watek www2":
tak jak pisalem, mam kamerke na usb zgodna z sterownikiem spca5xx
http://eko.one.pl/?p=openwrt-webcam
sciagnale pakiet z tej strony - kmod-video-core
wget http://eko.one.pl/openwrt/kamikaze/8.09_rc1/spca5xx.o -P /lib/modules/2.4.35.4
to wywalalo bledy, wiec sciagnalem do tmp i przekopiowalem do /lib/modules/2.6.32.8# i /lib/modules/2.6.32.9#
potem:
insmod videodev
insmod spca5xx
no i nic
root@OpenWrt:~# lsmod
Module Size Used by Not tainted
fuse 46256 0
usb_storage 31920 1
nf_nat_tftp 432 0
nf_conntrack_tftp 2400 1 nf_nat_tftp
nf_nat_irc 816 0
nf_conntrack_irc 2512 1 nf_nat_irc
nf_nat_ftp 1328 0
nf_conntrack_ftp 4704 1 nf_nat_ftp
ipt_MASQUERADE 992 2
iptable_nat 2256 1
nf_nat 10160 5 nf_nat_tftp,nf_nat_irc,nf_nat_ftp,ipt_MASQUERADE,iptable_nat
xt_NOTRACK 544 0
iptable_raw 656 1
xt_state 768 3
nf_conntrack_ipv4 7408 6 iptable_nat,nf_nat
nf_defrag_ipv4 624 1 nf_conntrack_ipv4
nf_conntrack 37776 12 nf_nat_tftp,nf_conntrack_tftp,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_conntrack_ftp,ipt_MASQUERADE,iptable_nat,nf_nat,xt_NOTRACK,xt_state,nf_conntrack_ipv4
ehci_hcd 31120 0
sd_mod 21600 2
pppoe 8304 0
pppox 1216 1 pppoe
ipt_REJECT 1680 2
xt_TCPMSS 1856 2
ipt_LOG 4176 0
xt_multiport 1792 0
xt_mac 576 0
xt_limit 1008 1
iptable_mangle 992 0
iptable_filter 768 1
ip_tables 8480 4 iptable_nat,iptable_raw,iptable_mangle,iptable_filter
xt_tcpudp 1760 5
x_tables 9296 12 ipt_MASQUERADE,iptable_nat,xt_NOTRACK,xt_state,ipt_REJECT,xt_TCPMSS,ipt_LOG,xt_multiport,xt_mac,xt_limit,ip_tables,xt_tcpudp
ext2 42256 0
ext3 91296 0
jbd 31376 1 ext3
ppp_async 6400 0
ppp_generic 18848 3 pppoe,pppox,ppp_async
slhc 4176 1 ppp_generic
vfat 7696 1
fat 42256 1 vfat
ath9k 85920 0
ath9k_common 1920 1 ath9k
ath9k_hw 214560 2 ath9k,ath9k_common
ath 880 3 ath9k,ath9k_common,ath9k_hw
nls_utf8 816 0
nls_iso8859_1 2832 1
nls_cp437 4368 1
usbcore 97424 3 usb_storage,ehci_hcd
scsi_mod 68160 2 usb_storage,sd_mod
nls_base 4800 6 vfat,fat,nls_utf8,nls_iso8859_1,nls_cp437,usbcore
mac80211 184288 2 ath9k,ath9k_common
cfg80211 115488 3 ath9k,ath9k_common,mac80211
compat_firmware_class 5168 0
compat 432 0
mbcache 3920 0
crc_ccitt 976 1 ppp_async
arc4 816 2
aes_generic 30256 0
deflate 1360 0
ecb 1328 2
cbc 2016 0
leds_gpio 1456 0
button_hotplug 2560 0
gpio_buttons 1968 0
input_polldev 1360 1 gpio_buttons
input_core 16896 4 button_hotplug,gpio_buttons,input_polldev
root@OpenWrt:~#root@OpenWrt:~# dmesg
Linux version 2.6.32.8 (cezary@eko.one.pl) (gcc version 4.3.3 (GCC) ) #5 Thu Feb 25 18:20:46 CET 2010
prom: fw_arg0=00000007, fw_arg1=a1f77fb0, fw_arg2=a1f78440, fw_arg3=00000008
MyLoader: sysp=00002000, boardp=01000000, parts=88000010
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR9132 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00002000
On node 0 totalpages: 8192
free_area_init_node: node 0, pgdat 802bb110, node_mem_map 81000000
Normal zone: 64 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 8128 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=TL-WR1043ND
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 29420k/32768k available (2026k kernel code, 3348k reserved, 388k data, 152k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is TP-LINK TL-WR1043ND
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY) Š 2001-2006 Red Hat, Inc.
yaffs Feb 24 2010 18:40:56 Installing.
msgmni has been set to 57
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
Atheros AR71xx SPI Controller driver version 0.2.4
m25p80 spi0.0: m25p64 (8192 Kbytes)
spi0.0: searching for MyLoader partition table at offset 0x10000
spi0.0: searching for MyLoader partition table at offset 0x20000
spi0.0: searching for MyLoader partition table at offset 0x30000
spi0.0: searching for MyLoader partition table at offset 0x40000
spi0.0: no MyLoader partition table found
Searching for RedBoot partition table in spi0.0 at offset 0x7e0000
Searching for RedBoot partition table in spi0.0 at offset 0x7f0000
No RedBoot partition table detected in spi0.0
spi0.0: no WRT160NL signature found
Creating 5 MTD partitions on "spi0.0":
0x000000000000-0x000000020000 : "u-boot"
0x000000020000-0x000000160000 : "kernel"
0x000000160000-0x0000007f0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=4D0000, len=320000
0x0000004d0000-0x0000007f0000 : "rootfs_data"
0x0000007f0000-0x000000800000 : "art"
0x000000020000-0x0000007f0000 : "firmware"
Realtek RTL8366RB ethernet switch driver version 0.2.0
rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
rtl8366-rtl: probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
Atheros AR71xx hardware watchdog driver version 0.1.0
ar71xx-wdt: timeout=15 secs (max=21)
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 152k freed
Please be patient, while OpenWrt loads ...
gpio-buttons driver version 0.1.2
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.3.1
ar71xx: pll_reg 0xb8050014: 0x1a000000
eth0: link up (1000Mbps/Full duplex)
Registered led device: tl-wr1043nd:green:usb
Registered led device: tl-wr1043nd:green:system
Registered led device: tl-wr1043nd:green:qss
Registered led device: tl-wr1043nd:green:wlan
mini_fo: using base directory: /
mini_fo: using storage directory: /tmp/root
eth0: link down
ar71xx: pll_reg 0xb8050014: 0x1a000000
eth0: link up (1000Mbps/Full duplex)
device eth0.1 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.1) entering forwarding state
Generic kernel compatibility enabled based on linux-next next-20100113
cfg80211: Calling CRDA to update world regulatory domain
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usbcore: registered new device driver usb
phy0: Selected rate control algorithm 'ath9k_rate_control'
phy0: Atheros AR9100 MAC/BB Rev:0 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
PPP generic driver version 2.4.2
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
nf_conntrack version 0.5.0 (462 buckets, 1848 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
usb 1-1: new high speed USB device using ar71xx-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1.4: new high speed USB device using ar71xx-ehci and address 3
fuse init (API version 7.13)
usb 1-1.4: configuration #1 chosen from 1 choice
hub 1-1.4:1.0: USB hub found
hub 1-1.4:1.0: 4 ports detected
jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
jffs2_build_filesystem(): unlocking the mtd device... done.
jffs2_build_filesystem(): erasing all blocks after the end marker... done.
mini_fo: using base directory: /
mini_fo: using storage directory: /jffs
ar71xx-wdt: enabling watchdog timer
usb 1-1.3: new high speed USB device using ar71xx-ehci and address 4
usb 1-1.3: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb 1-1.1: new full speed USB device using ar71xx-ehci and address 5
usb 1-1.1: configuration #1 chosen from 1 choice
scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
usb-storage: device scan complete
sd 0:0:0:0: [sda] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
usb 1-1.1: USB disconnect, address 5
usb 1-1.1: new full speed USB device using ar71xx-ehci and address 6
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.1: USB disconnect, address 6
usb 1-1.1: new full speed USB device using ar71xx-ehci and address 7
usb 1-1.1: configuration #1 chosen from 1 choice
root@OpenWrt:~#jak cos innego pokazac to prosze o komendy 
Wszystkie posty dotycza: TP-LINK TL-WR1043ND
Za pomoc Cezarego w poscie powyzej i ponizej dziekuje z gory :-)
Za pomoc Cezarego w poscie powyzej i ponizej dziekuje z gory :-)
