• Zarejestrowany: 2012-10-11
  • Posty: 9

Temat: wr1043nd transmission nie widzi dysku

Witam,
Siedzę juz z 3cią noc nad tym problemem, mianowicie udalo mi sie w koncu postawic extroot oraz ustawic wszystko aby montowalo sie po restarcie, ale z jakiegos powodu transmission nie widzi mojego dysku tylko zapisuje na pamiec flash,
Moje ustawienia

fstab

 config global automount
    option from_fstab 1
    option anon_mount 1
    
config global autoswap
    option from_fstab 1
    option anon_swap 0
    
config mount
    option target    /home
    option device    /dev/sda1
    option fstype    ext3
    option options    rw,sync
    option enabled    0
    option enabled_fsck 0

config swap
    #option device    /dev/sda2
    option uuid    bf60456b-5c5a-41b1-9d65-01adf6650b2a
    option enabled    1
config mount
        option target /mnt/hdd1    
        option device    /dev/sda3
        #option uuid    7d5fc2be-aaa7-cd01-7012-c0beaaa7cd01
        option fstype    ext2
        option options    rw,sync
        option enabled  1    
        option enabled_fsck 1

Transmission

config transmission
    option enabled 1
    option config_dir '/mnt/hdd1/config'
    option run_daemon_as_user root
    option alt_speed_down 500
    option alt_speed_enabled false
    option alt_speed_time_begin  540
    option alt_speed_time_day 1270
    option alt_speed_time_enabled false
    option alt_speed_time_end 1020
    option alt_speed_up 500
    option bind_address_ipv4 '0.0.0.0'
    option bind_address_ipv6 '::'
    option blocklist_enabled false
    option blocklist_url ''
    option cache_size_mb 2
    option dht_enabled true
    option download_dir '/mnt/hdd1/download'
    option download_queue_enabled true
    option download_queue_size 4
    option encryption 1
    option idle_seeding_limit 60
    option idle_seeding_limit_enabled false
    option incomplete_dir '/mnt/hdd1/incomplete'
    option incomplete_dir_enabled true
    option lazy_bitfield_enabled true
    option lpd_enabled false
    option message_level 1
    option open_file_limit 32
    option peer_congestion_algorithm ''
    option peer_limit_global 240
    option peer_limit_per_torrent 80
    option peer_port 51413
    option peer_port_random_high 65535
    option peer_port_random_low 49152
    option peer_port_random_on_start false
    option peer_socket_tos 0
    option pex_enabled true
    option port_forwarding_enabled true
    option preallocation 1
    option prefetch_enabled 1
    option queue_stalled_enabled true
    option queue_stalled_minutes 30
    option ratio_limit 2.0000
    option ratio_limit_enabled false
    option rename_partial_files true
    option rpc_authentication_required false
    option rpc_bind_address '0.0.0.0'
    option rpc_enabled true
    option rpc_password 'asdpilot'
    option rpc_port 9091
    option rpc_url '/transmission/'
    option rpc_username 'kamil'
    option rpc_whitelist '127.0.0.1,192.168.1.*'
    option rpc_whitelist_enabled true
    option scrape_paused_torrents_enabled true
    option script_torrent_done_enabled false
    option script_torrent_done_filename ''
    option seed_queue_enabled false
    option seed_queue_size 50
    option speed_limit_down 1000
    option speed_limit_down_enabled false
    option speed_limit_up 200
    option speed_limit_up_enabled false
    option start_added_torrents true
    option trash_original_torrent_files false
    option umask 18
    option upload_slots_per_torrent 14
    option utp_enabled true
    option scrape_paused_torrents true
    option watch_dir_enabled false
    option watch_dir ''

mount

/etc/config$ mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime,size=14692k)
tmpfs on /dev type tmpfs (rw,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
/dev/sda1 on /overlay type ext3 (rw,noatime,errors=continue,data=writeback)
mini_fo:/overlay on / type mini_fo (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
/dev/sda3 on /mnt/hdd1 type ext2 (rw,sync,relatime,errors=continue)
none on /proc/bus/usb type usbfs (rw,relatime)

dmesg

/etc/config$ mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime,size=14692k)
tmpfs on /dev type tmpfs (rw,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
/dev/sda1 on /overlay type ext3 (rw,noatime,errors=continue,data=writeback)
mini_fo:/overlay on / type mini_fo (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
/dev/sda3 on /mnt/hdd1 type ext2 (rw,sync,relatime,errors=continue)
none on /proc/bus/usb type usbfs (rw,relatime)
/etc/config$ dmesg
Linux version 2.6.32.27 (cezary@eko.one.pl) (gcc version 4.3.3 (GCC) ) #81 Wed Sep 19 20:19:34 CEST 2012
prom: fw_arg0=00000007, fw_arg1=a1f77fb0, fw_arg2=a1f78440, fw_arg3=00000008
MyLoader: sysp=22a202a9, boardp=02aaaaa2, parts=aaaaaa22
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR9132 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00002000
On node 0 totalpages: 8192
free_area_init_node: node 0, pgdat 802e9120, node_mem_map 81000000
  Normal zone: 64 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 8128 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=TL-WR1043ND
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 29228k/32768k available (2175k kernel code, 3540k reserved, 423k data, 152k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is TP-LINK TL-WR1043ND
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
yaffs Apr  7 2012 09:11:49 Installing. 
msgmni has been set to 57
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
Atheros AR71xx SPI Controller driver version 0.2.4
m25p80 spi0.0: s25sl064a (8192 Kbytes)
spi0.0: searching for MyLoader partition table at offset 0x10000
spi0.0: searching for MyLoader partition table at offset 0x20000
spi0.0: searching for MyLoader partition table at offset 0x30000
spi0.0: searching for MyLoader partition table at offset 0x40000
spi0.0: no MyLoader partition table found
Searching for RedBoot partition table in spi0.0 at offset 0x7e0000
Searching for RedBoot partition table in spi0.0 at offset 0x7f0000
No RedBoot partition table detected in spi0.0
spi0.0: no WRT160NL signature found
Creating 5 MTD partitions on "spi0.0":
0x000000000000-0x000000020000 : "u-boot"
0x000000020000-0x000000160000 : "kernel"
0x000000160000-0x0000007f0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=560000, len=290000 
0x000000560000-0x0000007f0000 : "rootfs_data"
0x0000007f0000-0x000000800000 : "art"
0x000000020000-0x0000007f0000 : "firmware"
Realtek RTL8366RB ethernet switch driver version 0.2.4
rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
rtl8366rb: probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
eth0: using fixed link parameters
Atheros AR71xx hardware watchdog driver version 0.1.0
ar71xx-wdt: timeout=15 secs (max=21)
TCP westwood registered
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 152k freed
Please be patient, while OpenWrt loads ...
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.3.1
ar71xx: pll_reg 0xb8050014: 0x1a000000
eth0: link up (1000Mbps/Full duplex)
Registered led device: tl-wr1043nd:green:usb
Registered led device: tl-wr1043nd:green:system
Registered led device: tl-wr1043nd:green:qss
Registered led device: tl-wr1043nd:green:wlan
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1: new full speed USB device using ar71xx-ehci and address 2
usb 1-1: not running at top speed; connect to a high speed hub
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new full speed USB device using ar71xx-ehci and address 3
usb 1-1.1: not running at top speed; connect to a high speed hub
usb 1-1.1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb 1-1.3: new full speed USB device using ar71xx-ehci and address 4
usb 1-1.3: not running at top speed; connect to a high speed hub
usb 1-1.3: configuration #1 chosen from 1 choice
hub 1-1.3:1.0: USB hub found
hub 1-1.3:1.0: 4 ports detected
usb 1-1.4: new full speed USB device using ar71xx-ehci and address 5
usb 1-1.4: not running at top speed; connect to a high speed hub
usb 1-1.4: configuration #1 chosen from 1 choice
hub 1-1.4:1.0: USB hub found
hub 1-1.4:1.0: 4 ports detected
scsi 0:0:0:0: Direct-Access     Seagate  Expansion Desk   070B PQ: 0 ANSI: 6
usb-storage: device scan complete
sd 0:0:0:0: [sda] 1953525167 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
eth0: link down
ar71xx: pll_reg 0xb8050014: 0x1a000000
eth0: link up (1000Mbps/Full duplex)
device eth0.1 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.1) entering forwarding state
Compat-wireless backport release: compat-wireless-2011-11-29
Backport based on wireless-testing.git master-2011-12-01
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
cfg80211: Calling CRDA for country: US
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
cfg80211: Regulatory domain changed to country: US
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
nf_conntrack version 0.5.0 (459 buckets, 1836 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
xt_time: kernel timezone is -0000
    Hooked IMQ after mangle on PREROUTING
    Hooked IMQ after nat on POSTROUTING
IMQ driver loaded successfully.
ip_set version 4 loaded
Ebtables v2.0 registered
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
fuse init (API version 7.13)
Adding 257032k swap on /dev/sda2.  Priority:-1 extents:1 across:257032k 
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
cfg80211: Calling CRDA for country: PL
cfg80211: Regulatory domain changed to country: PL
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
ar71xx-wdt: enabling watchdog timer
ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
               old minutes west=0, new minutes west=-60

logread

/etc/config$ mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime,size=14692k)
tmpfs on /dev type tmpfs (rw,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
/dev/sda1 on /overlay type ext3 (rw,noatime,errors=continue,data=writeback)
mini_fo:/overlay on / type mini_fo (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
/dev/sda3 on /mnt/hdd1 type ext2 (rw,sync,relatime,errors=continue)
none on /proc/bus/usb type usbfs (rw,relatime)
/etc/config$ dmesg
Linux version 2.6.32.27 (cezary@eko.one.pl) (gcc version 4.3.3 (GCC) ) #81 Wed Sep 19 20:19:34 CEST 2012
prom: fw_arg0=00000007, fw_arg1=a1f77fb0, fw_arg2=a1f78440, fw_arg3=00000008
MyLoader: sysp=22a202a9, boardp=02aaaaa2, parts=aaaaaa22
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR9132 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00002000
On node 0 totalpages: 8192
free_area_init_node: node 0, pgdat 802e9120, node_mem_map 81000000
  Normal zone: 64 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 8128 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=TL-WR1043ND
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 29228k/32768k available (2175k kernel code, 3540k reserved, 423k data, 152k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is TP-LINK TL-WR1043ND
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
yaffs Apr  7 2012 09:11:49 Installing. 
msgmni has been set to 57
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
Atheros AR71xx SPI Controller driver version 0.2.4
m25p80 spi0.0: s25sl064a (8192 Kbytes)
spi0.0: searching for MyLoader partition table at offset 0x10000
spi0.0: searching for MyLoader partition table at offset 0x20000
spi0.0: searching for MyLoader partition table at offset 0x30000
spi0.0: searching for MyLoader partition table at offset 0x40000
spi0.0: no MyLoader partition table found
Searching for RedBoot partition table in spi0.0 at offset 0x7e0000
Searching for RedBoot partition table in spi0.0 at offset 0x7f0000
No RedBoot partition table detected in spi0.0
spi0.0: no WRT160NL signature found
Creating 5 MTD partitions on "spi0.0":
0x000000000000-0x000000020000 : "u-boot"
0x000000020000-0x000000160000 : "kernel"
0x000000160000-0x0000007f0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=560000, len=290000 
0x000000560000-0x0000007f0000 : "rootfs_data"
0x0000007f0000-0x000000800000 : "art"
0x000000020000-0x0000007f0000 : "firmware"
Realtek RTL8366RB ethernet switch driver version 0.2.4
rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
rtl8366rb: probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
eth0: using fixed link parameters
Atheros AR71xx hardware watchdog driver version 0.1.0
ar71xx-wdt: timeout=15 secs (max=21)
TCP westwood registered
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 152k freed
Please be patient, while OpenWrt loads ...
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.3.1
ar71xx: pll_reg 0xb8050014: 0x1a000000
eth0: link up (1000Mbps/Full duplex)
Registered led device: tl-wr1043nd:green:usb
Registered led device: tl-wr1043nd:green:system
Registered led device: tl-wr1043nd:green:qss
Registered led device: tl-wr1043nd:green:wlan
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1: new full speed USB device using ar71xx-ehci and address 2
usb 1-1: not running at top speed; connect to a high speed hub
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new full speed USB device using ar71xx-ehci and address 3
usb 1-1.1: not running at top speed; connect to a high speed hub
usb 1-1.1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb 1-1.3: new full speed USB device using ar71xx-ehci and address 4
usb 1-1.3: not running at top speed; connect to a high speed hub
usb 1-1.3: configuration #1 chosen from 1 choice
hub 1-1.3:1.0: USB hub found
hub 1-1.3:1.0: 4 ports detected
usb 1-1.4: new full speed USB device using ar71xx-ehci and address 5
usb 1-1.4: not running at top speed; connect to a high speed hub
usb 1-1.4: configuration #1 chosen from 1 choice
hub 1-1.4:1.0: USB hub found
hub 1-1.4:1.0: 4 ports detected
scsi 0:0:0:0: Direct-Access     Seagate  Expansion Desk   070B PQ: 0 ANSI: 6
usb-storage: device scan complete
sd 0:0:0:0: [sda] 1953525167 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
eth0: link down
ar71xx: pll_reg 0xb8050014: 0x1a000000
eth0: link up (1000Mbps/Full duplex)
device eth0.1 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.1) entering forwarding state
Compat-wireless backport release: compat-wireless-2011-11-29
Backport based on wireless-testing.git master-2011-12-01
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
cfg80211: Calling CRDA for country: US
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
cfg80211: Regulatory domain changed to country: US
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
nf_conntrack version 0.5.0 (459 buckets, 1836 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
xt_time: kernel timezone is -0000
    Hooked IMQ after mangle on PREROUTING
    Hooked IMQ after nat on POSTROUTING
IMQ driver loaded successfully.
ip_set version 4 loaded
Ebtables v2.0 registered
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
fuse init (API version 7.13)
Adding 257032k swap on /dev/sda2.  Priority:-1 extents:1 across:257032k 
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
cfg80211: Calling CRDA for country: PL
cfg80211: Regulatory domain changed to country: PL
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
ar71xx-wdt: enabling watchdog timer
ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
               old minutes west=0, new minutes west=-60
/etc/config$ logread
Jan  1 00:01:07 Gargoyle daemon.info hostapd: wlan0: STA 02:23:cd:19:14:ed WPA: pairwise key handshake completed (RSN)
Jan  1 00:01:08 Gargoyle user.info kernel: device wlan0 left promiscuous mode
Jan  1 00:01:08 Gargoyle user.info kernel: br-lan: port 2(wlan0) entering disabled state
Jan  1 00:01:08 Gargoyle user.info kernel: device wlan0 entered promiscuous mode
Jan  1 00:01:08 Gargoyle user.info kernel: br-lan: port 2(wlan0) entering forwarding state
Jan  1 00:01:09 Gargoyle user.info sysinit: Loading defaults
Jan  1 00:01:10 Gargoyle user.info sysinit: Loading synflood protection
Jan  1 00:01:10 Gargoyle user.info sysinit: Adding custom chains
Jan  1 00:01:10 Gargoyle user.info sysinit: Loading zones
Jan  1 00:01:11 Gargoyle user.info sysinit: Loading forwardings
Jan  1 00:01:11 Gargoyle user.info sysinit: Loading redirects
Jan  1 00:01:11 Gargoyle user.info sysinit: Loading rules
Jan  1 00:01:12 Gargoyle user.info sysinit: Loading includes
Jan  1 00:01:12 Gargoyle user.info sysinit: Optimizing conntrack
Jan  1 00:01:12 Gargoyle user.info sysinit: Loading interfaces
Jan  1 00:01:12 Gargoyle user.info firewall: adding lan (br-lan) to zone lan
Jan  1 00:01:13 Gargoyle user.info firewall: adding wan (eth0.2) to zone wan
Jan  1 00:01:14 Gargoyle cron.err crond[2136]: crond (busybox 1.15.3) started, log level 9
Jan  1 00:01:15 Gargoyle authpriv.info dropbear[2161]: Running in background
Jan  1 00:01:15 Gargoyle user.info sysinit: Changing password for kamil
Jan  1 00:01:15 Gargoyle user.info sysinit: New password:
Jan  1 00:01:15 Gargoyle user.info sysinit: Bad password: too weak
Jan  1 00:01:16 Gargoyle cron.err crond[2265]: crond (busybox 1.15.3) started, log level 9
Jan  1 00:01:16 Gargoyle user.info sysinit: Retype password:
Jan  1 00:01:16 Gargoyle auth.info passwd: Password for kamil changed by root
Jan  1 00:01:16 Gargoyle user.info sysinit: Password for kamil changed by root
Jan  1 00:01:18 Gargoyle daemon.warn httpd_gargoyle[2384]: started as root without requesting chroot(), warning only
Jan  1 00:01:18 Gargoyle daemon.notice httpd_gargoyle[2384]: httpd_gargoyle/1.0 14mar2008 starting on Gargoyle, port 80
Jan  1 00:01:19 Gargoyle user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Jan  1 00:01:19 Gargoyle user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Jan  1 00:01:19 Gargoyle cron.err crond[2626]: crond (busybox 1.15.3) started, log level 9
Jan  1 00:01:22 Gargoyle daemon.info dnsmasq[2642]: started, version 2.55 cachesize 150
Jan  1 00:01:22 Gargoyle daemon.info dnsmasq[2642]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Jan  1 00:01:22 Gargoyle daemon.info dnsmasq-dhcp[2642]: DHCP, IP range 192.168.1.100 -- 192.168.1.250, lease time 12h
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain micro
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain micro
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain micro
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain oss
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain oss
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain oss
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain null
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain null
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain null
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain ing
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain ing
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain ing
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain indy
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain indy
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain indy
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain gopher
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain gopher
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain gopher
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain geek
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain geek
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain geek
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain fur
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain fur
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain fur
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain free
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain free
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain free
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain bbs
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain bbs
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain bbs
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain dyn
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain dyn
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain dyn
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain parody
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain parody
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain parody
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain glue
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain glue
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain glue
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 78.47.86.43#53 for domain bit
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 178.32.31.41#53 for domain bit
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using local addresses only for domain lan
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: reading /tmp/resolv.conf.auto
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 194.168.8.100#53
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 194.168.4.100#53
Jan  1 00:01:23 Gargoyle daemon.warn dnsmasq[2642]: ignoring nameserver 192.168.1.1 - local interface
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain micro
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain micro
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain micro
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain oss
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain oss
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain oss
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain null
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain null
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain null
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain ing
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain ing
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain ing
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain indy
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain indy
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain indy
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain gopher
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain gopher
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain gopher
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain geek
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain geek
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain geek
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain fur
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain fur
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain fur
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain free
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain free
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain free
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain bbs
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain bbs
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain bbs
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain dyn
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain dyn
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain dyn
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain parody
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain parody
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain parody
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.142.171.235#53 for domain glue
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 95.211.32.162#53 for domain glue
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 66.244.95.20#53 for domain glue
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 78.47.86.43#53 for domain bit
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using nameserver 178.32.31.41#53 for domain bit
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: using local addresses only for domain lan
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq[2642]: read /etc/hosts - 2 addresses
Jan  1 00:01:23 Gargoyle daemon.info dnsmasq-dhcp[2642]: read /etc/ethers - 0 addresses
Jan  1 00:01:23 Gargoyle daemon.warn exportfs[2658]: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Jan  1 00:01:23 Gargoyle user.info sysinit: exportfs: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Jan  1 00:01:23 Gargoyle daemon.err exportfs[2658]: can't lock /var/lib/nfs/etab for writing
Jan  1 00:01:23 Gargoyle user.info sysinit: exportfs: can't lock /var/lib/nfs/etab for writing
Jan  1 00:01:24 Gargoyle user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Jan  1 00:01:24 Gargoyle user.info sysinit: (Did you specify correct configuration file path?)
Jan  1 00:01:27 Gargoyle user.info sysinit: setting up led WLAN
Jan  1 00:01:27 Gargoyle user.info sysinit: setting up led USB
Jan  1 00:01:27 Gargoyle user.debug kernel: ar71xx-wdt: enabling watchdog timer
Oct 11 15:22:37 Gargoyle daemon.info hostapd: wlan0: STA 02:23:cd:19:14:ed WPA: group key handshake completed (RSN)
Oct 11 15:22:37 Gargoyle daemon.info dnsmasq-dhcp[2642]: DHCPDISCOVER(br-lan) 74:e2:f5:d9:1d:ce 
Oct 11 15:22:37 Gargoyle daemon.info dnsmasq-dhcp[2642]: DHCPOFFER(br-lan) 192.168.1.137 74:e2:f5:d9:1d:ce 
Oct 11 15:22:40 Gargoyle daemon.info dnsmasq-dhcp[2642]: DHCPDISCOVER(br-lan) 74:e2:f5:d9:1d:ce 
Oct 11 15:22:40 Gargoyle daemon.info dnsmasq-dhcp[2642]: DHCPOFFER(br-lan) 192.168.1.137 74:e2:f5:d9:1d:ce 
Oct 11 15:22:40 Gargoyle daemon.info dnsmasq-dhcp[2642]: DHCPDISCOVER(br-lan) 74:e2:f5:d9:1d:ce 
Oct 11 15:22:40 Gargoyle daemon.info dnsmasq-dhcp[2642]: DHCPOFFER(br-lan) 192.168.1.137 74:e2:f5:d9:1d:ce 
Oct 11 15:22:41 Gargoyle daemon.err transmission-daemon[2904]: UDP Failed to set receive buffer: requested 4194304, got 229376 (tr-udp.c:75)
Oct 11 15:22:41 Gargoyle daemon.err transmission-daemon[2904]: UDP Failed to set send buffer: requested 1048576, got 229376 (tr-udp.c:86)
Oct 11 15:22:44 Gargoyle daemon.info dnsmasq-dhcp[2642]: DHCPDISCOVER(br-lan) 74:e2:f5:d9:1d:ce 
Oct 11 15:22:44 Gargoyle daemon.info dnsmasq-dhcp[2642]: DHCPOFFER(br-lan) 192.168.1.137 74:e2:f5:d9:1d:ce 
Oct 11 15:23:11 Gargoyle cron.err crond[2626]: time disparity of 22499421 minutes detected
Oct 11 15:23:19 Gargoyle daemon.info dnsmasq-dhcp[2642]: DHCPDISCOVER(br-lan) 192.168.1.122 90:e6:ba:43:2e:79 
Oct 11 15:23:19 Gargoyle daemon.info dnsmasq-dhcp[2642]: DHCPOFFER(br-lan) 192.168.1.122 90:e6:ba:43:2e:79 
Oct 11 15:23:19 Gargoyle daemon.info dnsmasq-dhcp[2642]: DHCPREQUEST(br-lan) 192.168.1.122 90:e6:ba:43:2e:79 
Oct 11 15:23:19 Gargoyle daemon.info dnsmasq-dhcp[2642]: DHCPACK(br-lan) 192.168.1.122 90:e6:ba:43:2e:79 admin
Oct 11 15:23:24 Gargoyle daemon.info dnsmasq-dhcp[2642]: DHCPREQUEST(br-lan) 192.168.1.122 90:e6:ba:43:2e:79 
Oct 11 15:23:24 Gargoyle daemon.info dnsmasq-dhcp[2642]: DHCPACK(br-lan) 192.168.1.122 90:e6:ba:43:2e:79 admin
Oct 11 15:23:34 Gargoyle authpriv.info dropbear[2913]: Child connection from 192.168.1.122:4575
Oct 11 15:23:41 Gargoyle authpriv.notice dropbear[2913]: Password auth succeeded for 'root' from 192.168.1.122:4575
Oct 11 15:31:03 Gargoyle user.warn kernel: ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
Oct 11 15:31:03 Gargoyle user.warn kernel:                old minutes west=0, new minutes west=-60
Oct 11 15:31:06 Gargoyle authpriv.info dropbear[2913]: Exit (root): Exited normally
Oct 11 15:31:12 Gargoyle ftp.info vsftpd[2937]: [kamil] OK LOGIN: Client "192.168.1.122"
Oct 11 15:32:05 Gargoyle authpriv.info dropbear[2943]: Child connection from 192.168.1.122:4666
Oct 11 15:32:10 Gargoyle authpriv.notice dropbear[2943]: Password auth succeeded for 'root' from 192.168.1.122:4666
Oct 11 15:32:10 Gargoyle authpriv.info dropbear[2943]: Exit (root): Exited normally
Oct 11 15:32:15 Gargoyle authpriv.info dropbear[2946]: Child connection from 192.168.1.122:4667
Oct 11 15:32:18 Gargoyle authpriv.notice dropbear[2946]: Password auth succeeded for 'root' from 192.168.1.122:4667
Oct 11 15:32:18 Gargoyle authpriv.info dropbear[2946]: Exit (root): Exited normally
Oct 11 15:32:31 Gargoyle authpriv.info dropbear[2951]: Child connection from 192.168.1.122:4669
Oct 11 15:32:34 Gargoyle authpriv.notice dropbear[2951]: Password auth succeeded for 'root' from 192.168.1.122:4669
Oct 11 15:32:37 Gargoyle daemon.info hostapd: wlan0: STA 02:23:cd:19:14:ed WPA: group key handshake completed (RSN)

Prosil bym o jakies wskazówki z racji iz odchodzę juz od zmysłów i pomysłów co moze być nie tak.

pozdrawiam

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,189

Odp: wr1043nd transmission nie widzi dysku

Bo najpierw dysk ma się zamontować a później uruchomić transmission na nim. Dysk wykrywa się i montuje z pewnym opóźnieniem. Nie możesz wcześniej uruchomić transmission bo nic z tego nie będzie.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez kamilgd

  • Zarejestrowany: 2012-10-11
  • Posty: 9

Odp: wr1043nd transmission nie widzi dysku

faktycznie dzieki, ale to dziwne jest  bo extroot startuje normalnie a jest na tym samym dysku ( 1TB ) podzielony na 2partycje (+swap) więc jesli extroot odpala na czas to reszta powinna juz byc zamontowana wraz z nim ?
Więc za kazdym resecie routera trzeba odpalać ręcznie transmission tak ?
Pozdrawiam i dzięki wielkie jeszcze raz

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,189

Odp: wr1043nd transmission nie widzi dysku

Ale dane transmission nie trzymasz na extroorcie tylko na dysku montowanym w innym katalogu. Niekoniecznie ręcznie, możesz sobie to w //etc/rc.local opóźnienie zrobić: http://eko.one.pl/?p=openwrt-skrypty#ur … zopnieniem

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez kamilgd

  • Zarejestrowany: 2012-10-11
  • Posty: 9

Odp: wr1043nd transmission nie widzi dysku

bardzo dziekuje, powiedz mi tylko jedno chciałem przesłać na ten dysk trochę danych ale upload mnie zabija 150kb/s czy to normalne ? Download jest spoko 10+Mb/s.
Pozdrawiam

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,189

Odp: wr1043nd transmission nie widzi dysku

Nie, nie normalnie. Chyba że jest tak obciążony router że już zapis na nośnik go wykańcza.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez kamilgd

  • Zarejestrowany: 2012-10-11
  • Posty: 9

Odp: wr1043nd transmission nie widzi dysku

free pokazuje :

              total         used         free       shared      buffers
  Mem:        29380        27708         1672            0         2336
Swap:       257032          284       256748
Total:       286412        27992       258420


ciut ciut za duzo ramu mam zajętego czyż nie ? Czy to może być przyczyną ? Jakaś porada jak to zoptymalizować  ?
Pozdrawiam

8 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,189

Odp: wr1043nd transmission nie widzi dysku

Jak system potrzebuje to korzysta z ramu. Nie po to go masz żeby leżał odłogiem.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

9 Odpowiedź przez kamilgd

  • Zarejestrowany: 2012-10-11
  • Posty: 9

Odp: wr1043nd transmission nie widzi dysku

no wiadoma sprawa, lecz czy jest jakieś lekarstwo na ten wolny upload ? jakaś wskazówka ? W sumie mam 3kości 64MB na ram mod oraz cały sprzęt do wymiany ( dawny serwisant gsm ze mnie więc sporo sprzetu zostało ) ale czy to pomoże ?
A może jakieś inne cudo by pomoglo na te transfery ?
pozdrawiam

10 Odpowiedź przez kamilgd

  • Zarejestrowany: 2012-10-11
  • Posty: 9

Odp: wr1043nd transmission nie widzi dysku

dziwna sprawa muszę przyznać, ale po zmianie chmod na 777 folderu download, upload podskoczył z 150kb/s na 4Mb/s w kazdym badz razie naprawdę wielkie dzięki za pomoc.
pozdrawiam

11 Odpowiedź przez kamilgd

  • Zarejestrowany: 2012-10-11
  • Posty: 9

Odp: wr1043nd transmission nie widzi dysku

Sorka ze tak post pod postem, ale mimo iz transmission uruchamia sie 60sek po restarcie nadal nie pobiera danych na dysk, mimo iz pliki co przerzuciłem tam przez ftp sa normalnie seedowane, kminie to juz z 3h i nie moge dojsc, miał ktoś coś podobnego może ?

12 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,189

Odp: wr1043nd transmission nie widzi dysku

Zabij transmission i uruchom jeszcze raz. Zrobił swoje konfigi na dysku?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

13 Odpowiedź przez kamilgd

  • Zarejestrowany: 2012-10-11
  • Posty: 9

Odp: wr1043nd transmission nie widzi dysku

zrobiłem jak napisales, stop, start, w transmission niby widzi dysk bo to co przewalilem na dysk przez ftp normalnie jest załadowane i seeduje, configi sa na dysku normalnie, oraz na dolnym pasku widać ile pozostalo mi miejsca i jesli coś dodam to spada wolne miejsce czyli czyta go. dziwne strasznie

14 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,189

Odp: wr1043nd transmission nie widzi dysku

Wyłącz transmission na starcie (/etc/init.d/transmission disable). I niech się uruchamia z /etc/rc.local.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

15 Odpowiedź przez kamilgd (edytowany przez kamilgd 2012-10-11 21:15:04)

  • Zarejestrowany: 2012-10-11
  • Posty: 9

Odp: wr1043nd transmission nie widzi dysku

no tak tez mam zrobione i nadal nic, a opoznienie dalem nie 20 a 60sek nie zalezy mi na az tak szybkim starcie,


free
              total         used         free       shared      buffers
  Mem:        29380        25432         3948            0          776
Swap:       257032        27260       229772
Total:       286412        52692       233720

16 Odpowiedź przez LiO

  • LiO
  • LiO
  • Użytkownik
  • Nieaktywny
  • Skąd: Wrocław
  • Zarejestrowany: 2012-01-31
  • Posty: 376

Odp: wr1043nd transmission nie widzi dysku

top nie free

http://klatka.ovh - CABANA PUBLIC SERVER
http://klatka.ovh/psi/ - phpsysinfo
http://temp.klatka.ovh/ - pogodynka

LiO's Strona