Po ostatnim upgrade do OpenWrt r32561, po restarcie losowo brak WIFI, w syslog pojawia się błąd "Failed to start hostapd for phy0". Po ponownym odpaleniu poleceniem wifi już jest OK, jakiś pomysł jak wcześniej elegancko ustawić world regulatory domain na PL?
Dodałem "iw reg set PL" do rc.local ale wykonuje się za późno.

uci set wireless.radio0.country=PL
uci set wireless.radio0.channel=9
uci set wireless.radio0.hwmode=11ng
uci add_list wireless.radio0.ht_capab="HT40+"
uci add_list wireless.radio0.ht_capab="HT40-"
uci set wireless.radio0.noscan=1
uci set wireless.radio0.htmode=HT40+
uci set wireless.@wifi-iface[0].ssid=xxxx
uci set wireless.@wifi-iface[0].encryption=psk2
uci set wireless.@wifi-iface[0].key=xxxx
uci set wireless.@wifi-device[0].disabled=0

Jan  1 01:00:39 OpenWrt user.info kernel: fuse init (API version 7.13)
Jan  1 01:00:39 OpenWrt user.notice 3g-hotplug: Starting interface wan for device ttyUSB0
Jan  1 01:00:41 OpenWrt user.info kernel: cfg80211: Calling CRDA for country: PL
Jan  1 01:00:41 OpenWrt user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_2.6.32.27_ehci_hcd Product=Atheros_AR91xx_built-in_EHCI_controller Serial=ar71xx-ehci
Jan  1 01:00:41 OpenWrt user.notice usb-modeswitch: 1-1:1.0: Manufacturer=Huawei_Technologies Product=HUAWEI_Mobile Serial=?
Jan  1 01:00:41 OpenWrt user.notice usb-modeswitch: 1-1:1.1: Manufacturer=Huawei_Technologies Product=HUAWEI_Mobile Serial=?
Jan  1 01:00:41 OpenWrt daemon.notice pppd[807]: pppd 2.4.5 started by root, uid 0
Jan  1 01:00:41 OpenWrt local2.info chat[842]: abort on (BUSY)
Jan  1 01:00:41 OpenWrt local2.info chat[842]: abort on (NO CARRIER)
Jan  1 01:00:41 OpenWrt local2.info chat[842]: abort on (ERROR)
Jan  1 01:00:41 OpenWrt local2.info chat[842]: report (CONNECT)
Jan  1 01:00:41 OpenWrt local2.info chat[842]: timeout set to 10 seconds
Jan  1 01:00:41 OpenWrt local2.info chat[842]: send (AT&F^M)
Jan  1 01:00:41 OpenWrt local2.info chat[842]: expect (OK)
Jan  1 01:00:41 OpenWrt local2.info chat[842]: ~^M
Jan  1 01:00:41 OpenWrt user.notice usb-modeswitch: 1-1:1.2: Manufacturer=Huawei_Technologies Product=HUAWEI_Mobile Serial=?
Jan  1 01:00:41 OpenWrt local2.info chat[842]: NO CARRIER
Jan  1 01:00:41 OpenWrt local2.info chat[842]:  -- failed
Jan  1 01:00:41 OpenWrt local2.info chat[842]: Failed (NO CARRIER)
Jan  1 01:00:41 OpenWrt daemon.debug pppd[807]: Script USE_APN=internet /usr/sbin/chat -t5 -v -E -f /etc/chatscripts/3g.chat finished (pid 841), status = 0x5
Jan  1 01:00:41 OpenWrt daemon.err pppd[807]: Connect script failed
Jan  1 01:00:41 OpenWrt user.notice usb-modeswitch: 1-1:1.3: Manufacturer=Huawei_Technologies Product=HUAWEI_Mobile Serial=?
Jan  1 01:00:42 OpenWrt user.notice usb-modeswitch: 1-1:1.4: Manufacturer=Huawei_Technologies Product=HUAWEI_Mobile Serial=?
Jan  1 01:00:42 OpenWrt user.notice usb-modeswitch: 1-1:1.5: Manufacturer=Huawei_Technologies Product=HUAWEI_Mobile Serial=?
Jan  1 01:00:42 OpenWrt user.notice usb-modeswitch: 1-1:1.6: Manufacturer=Huawei_Technologies Product=HUAWEI_Mobile Serial=?
Jan  1 01:00:43 OpenWrt daemon.warn hostapd: wlan0: IEEE 802.11 Configured HT40 secondary channel (13) not found from the channel list of current mode (1) IEEE 802.11g
Jan  1 01:00:43 OpenWrt daemon.warn hostapd: wlan0: IEEE 802.11 Configured channel (9) not found from the channel list of current mode (1) IEEE 802.11g
Jan  1 01:00:43 OpenWrt user.info kernel: device wlan0 entered promiscuous mode
Jan  1 01:00:43 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering forwarding state
Jan  1 01:00:43 OpenWrt daemon.warn hostapd: wlan0: IEEE 802.11 Hardware does not support configured channel
Jan  1 01:00:43 OpenWrt user.info sysinit: rmdir[ctrl_interface]: No such file or directory
Jan  1 01:00:43 OpenWrt user.info kernel: device wlan0 left promiscuous mode
Jan  1 01:00:43 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering disabled state
Jan  1 01:00:43 OpenWrt user.info sysinit: Configuration file: /var/run/hostapd-phy0.conf
Jan  1 01:00:43 OpenWrt user.info sysinit: wlan0: IEEE 802.11 Configured HT40 secondary channel (13) not found from the channel list of current mode (1) IEEE 802.11g
Jan  1 01:00:43 OpenWrt user.info sysinit: wlan0: IEEE 802.11 Configured channel (9) not found from the channel list of current mode (1) IEEE 802.11g
Jan  1 01:00:43 OpenWrt user.info sysinit: wlan0: IEEE 802.11 Hardware does not support configured channel
Jan  1 01:00:43 OpenWrt user.info sysinit: Could not select hw_mode and channel. (-4)
Jan  1 01:00:43 OpenWrt user.info sysinit: wlan0: Unable to setup interface.
Jan  1 01:00:43 OpenWrt user.info sysinit: Failed to start hostapd for phy0
Jan  1 01:00:43 OpenWrt user.info kernel: cfg80211: Regulatory domain changed to country: PL
Jan  1 01:00:43 OpenWrt user.info kernel: cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 01:00:43 OpenWrt user.info kernel: cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan  1 01:00:43 OpenWrt user.info kernel: cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan  1 01:00:43 OpenWrt user.info kernel: cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan  1 01:00:43 OpenWrt user.info kernel: cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan  1 01:00:44 OpenWrt user.info sysinit: Loading defaults

iwlist wlan0 channel
wlan0     13 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz