76 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: Installacja i deinstalacja pakietów na MR3420

bezpieczniej

/bin/mount -t usbfs none /proc/bus/usb
sleep 5
/usr/bin/usb_modeswitch -v 12d1 -p 14fe -c /etc/usb_modeswitch.d/12d1:14fe

u usunąć z systemu wszystkie wywołania usb-modeswitch

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

77 Odpowiedź przez macmus

  • macmus
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2009-08-12
  • Posty: 317

Odp: Installacja i deinstalacja pakietów na MR3420

jeszcze :

root@Gargoyle:~$ cat /proc/bus/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 1
B:  Alloc=  2/800 us ( 0%), #Int=  2, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 2.06
S:  Manufacturer=Linux 2.6.32.27 ehci_hcd
S:  Product=Atheros AR91xx built-in EHCI controller
S:  SerialNumber=ar71xx-ehci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1506 Rev= 1.02
S:  Manufacturer=HUAWEI
S:  Product=HUAWEI Mobile
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:  If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=03 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=02 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

czyli dokłądna procedurka to w moim przypadku mam zrobić, po włożeniu modemu z kartą microSD

bin/mount -t usbfs none /proc/bus/usb
sleep 5
/usr/bin/usb_modeswitch -v 12d1 -p 1506 -c /etc/usb_modeswitch.d/12d1:1506

potem odrazu 

uci set fstab.@mount[0].enabled=1
uci commit

i reboot

czy trzeba potem odmontowywać overlay jak kolega z sąsiedniego wątku ?

78 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: Installacja i deinstalacja pakietów na MR3420

Żadnego odmontowania /overlay.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

79 Odpowiedź przez macmus (edytowany przez macmus 2012-06-14 19:21:55)

  • macmus
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2009-08-12
  • Posty: 317

Odp: Installacja i deinstalacja pakietów na MR3420

root@Gargoyle:~$ /bin/mount -t usbfs none /proc/bus/usb
root@Gargoyle:~$ sleep 5
root@Gargoyle:~$ /usr/bin/usb_modeswitch -v 12d1 -p 1506 -c /etc/usb_modeswitch.d/12d1:1506
Error: Could not find file /etc/usb_modeswitch.d/12d1:1506

?

80 Odpowiedź przez macmus (edytowany przez macmus 2012-06-14 19:21:31)

  • macmus
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2009-08-12
  • Posty: 317

Odp: Installacja i deinstalacja pakietów na MR3420

czy tutaj

root@Gargoyle:~$ cat /lib/preinit/50_determine_usb_root
#!/bin/sh
# Copyright (C) 2010 Vertical Communications
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.


determine_external_root() {
        pi_include /lib/functions/extmount.sh
        pi_include /lib/functions/mount.sh

        local OLD_UCI_CONFIG_DIR="$UCI_CONFIG_DIR"
        set_jffs_mp
        determine_root_device

        # extroot requires extroot and fstab config files, therefore
        # we assume configuration is incomplete and not to be used if either of them
        # is missing (for jffs versions of these files on squashfs image)
        if [ "$jffs" = "/tmp/overlay" ] && [ -r "/tmp/overlay/etc/config/fstab" ]; then
                UCI_CONFIG_DIR="/tmp/overlay/etc/config"
                ER_IS_SQUASHFS=true
                ER_OVERLAY_PREFIX="/tmp/overlay"
        fi

        # For squashfs on firstboot root_device will be tmpfs for the ramoverlay,
        # unless there is a saved config, in which case it will be /dev/root,
        # however in the case of a saved config, it won't be restored until after
        # this script, so there won't be a config on the first boot after
        # flashing a squashfs-based filesystem
        # For ext2, ramdisk, or jffs2 root filesystems root_device is /dev/root
        # For squashfs after firstboot, root filesystem is /dev/root
        # We only use the config from the root or jffs if the root_device is
        # /dev/root
        [ "$root_device" = "/dev/root" ] && {
                er_load_modules
                /usr/bin/usb_modeswitch -v 12d1 -p 1506 -c /etc/usb_modeswitch.d/12d1:1506
                [ -n "$extroot_settle_time" ] && [ "$extroot_settle_time" -gt 0 ] && {
                        sleep $extroot_settle_time
                }
                config_load fstab
                config_foreach config_mount_by_section mount 1

                [ "$rootfs_found" = "1" ] && grep -q ' /overlay ' /proc/mounts && {
                        pi_extroot_mount_success=true
                        pi_mount_skip_next=false
                }
        }
        UCI_CONFIG_DIR="$OLD_UCI_CONFIG_DIR"
}

boot_hook_add preinit_mount_root determine_external_root

czy wszystko ma być w tym pliku ?

81 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: Installacja i deinstalacja pakietów na MR3420

Nóż się czasami kroi jak wy czytacie jak to zrobić. Jakie 1506? Przecież to nie jest identyfikator E3131 PRZED przełączeniem. Miałeś podane 14fe i tak ma być.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

82 Odpowiedź przez macmus

  • macmus
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2009-08-12
  • Posty: 317

Odp: Installacja i deinstalacja pakietów na MR3420

czyli plik ma wyglądać tak

root@Gargoyle:~$ cat /lib/preinit/50_determine_usb_root
#!/bin/sh
# Copyright (C) 2010 Vertical Communications
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.


determine_external_root() {
        pi_include /lib/functions/extmount.sh
        pi_include /lib/functions/mount.sh

        local OLD_UCI_CONFIG_DIR="$UCI_CONFIG_DIR"
        set_jffs_mp
        determine_root_device

        # extroot requires extroot and fstab config files, therefore
        # we assume configuration is incomplete and not to be used if either of them
        # is missing (for jffs versions of these files on squashfs image)
        if [ "$jffs" = "/tmp/overlay" ] && [ -r "/tmp/overlay/etc/config/fstab" ]; then
                UCI_CONFIG_DIR="/tmp/overlay/etc/config"
                ER_IS_SQUASHFS=true
                ER_OVERLAY_PREFIX="/tmp/overlay"
        fi

        # For squashfs on firstboot root_device will be tmpfs for the ramoverlay,
        # unless there is a saved config, in which case it will be /dev/root,
        # however in the case of a saved config, it won't be restored until after
        # this script, so there won't be a config on the first boot after
        # flashing a squashfs-based filesystem
        # For ext2, ramdisk, or jffs2 root filesystems root_device is /dev/root
        # For squashfs after firstboot, root filesystem is /dev/root
        # We only use the config from the root or jffs if the root_device is
        # /dev/root
        [ "$root_device" = "/dev/root" ] && {
                er_load_modules
                /bin/mount -t usbfs none /proc/bus/usb
                sleep 5
                /usr/bin/usb_modeswitch -v 12d1 -p 14fe -c /etc/usb_modeswitch.d/12d1:14fe
                [ -n "$extroot_settle_time" ] && [ "$extroot_settle_time" -gt 0 ] && {
                        sleep $extroot_settle_time
                }
                config_load fstab
                config_foreach config_mount_by_section mount 1

                [ "$rootfs_found" = "1" ] && grep -q ' /overlay ' /proc/mounts && {
                        pi_extroot_mount_success=true
                        pi_mount_skip_next=false
                }
        }
        UCI_CONFIG_DIR="$OLD_UCI_CONFIG_DIR"
}

boot_hook_add preinit_mount_root determine_external_root

?

83 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: Installacja i deinstalacja pakietów na MR3420

Tak.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

84 Odpowiedź przez macmus

  • macmus
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2009-08-12
  • Posty: 317

Odp: Installacja i deinstalacja pakietów na MR3420

lepiej, działa, ale są errory w dmesg ...:(

root@Gargoyle:~$ df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                 2.5M      2.5M         0 100% /rom
tmpfs                    14.4M    100.0K     14.4M   1% /tmp
tmpfs                   512.0K         0    512.0K   0% /dev
/dev/sda2                28.4G     44.6M     28.4G   0% /overlay
mini_fo:/overlay          2.5M      2.5M         0 100% /
root@Gargoyle:~$ cd /mnt/
root@Gargoyle:/mnt$ ls
sda1  sda2  sda3
root@Gargoyle:/mnt$ ls -ltr
drwxr-xr-x    2 root     root         4096 Jun 13 21:34 sda3
drwxr-xr-x    2 root     root         4096 Jun 13 21:34 sda2
drwxr-xr-x    2 root     root         4096 Jun 13 21:34 sda1
root@Gargoyle:/mnt$ cd /overlay/
root@Gargoyle:/overlay$ ls
bin         data        etc         lib         lost+found  mnt         plik.txt
root@Gargoyle:/overlay$ ls -ltr
drwxr-xr-x   11 root     root         4096 Jan  1  1970 etc
drwx------    2 root     root        16384 Jun 13 21:21 lost+found
-rw-r--r--    1 root     root           23 Jun 13 21:31 plik.txt
drwxr-xr-x    2 root     root         4096 Jun 13 21:34 data
drwxr-xr-x    2 root     root         4096 Jun 13 21:34 bin
drwxr-xr-x    7 root     root         4096 Jun 13 21:34 usr
drwxr-xr-x    5 root     root         4096 Jun 13 21:34 mnt
drwxr-xr-x    3 root     root         4096 Jun 13 21:34 lib
root@Gargoyle:/overlay$
root@Gargoyle:/overlay$
root@Gargoyle:/overlay$
root@Gargoyle:/overlay$
root@Gargoyle:/overlay$ dmesg
l zone: 8128 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=TL-MR3420
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 29452k/32768k available (2022k kernel code, 3316k reserved, 366k data, 136k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is TP-LINK TL-MR3420
registering PCI controller with io_map_base unset
bio: create slab <bio-0> at 0
PCI: fixup device 0000:00:00.0
pci 0000:00:00.0: reg 10 64bit mmio: [0x000000-0x00ffff]
pci 0000:00:00.0: supports D1
pci 0000:00:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:00.0: PME# disabled
PCI: mapping irq 48 to pin1@0000:00:00.0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  Š 2001-2006 Red Hat, Inc.
msgmni has been set to 57
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
Atheros AR71xx SPI Controller driver version 0.2.4
m25p80 spi0.0: en25f32 (4096 Kbytes)
spi0.0: searching for MyLoader partition table at offset 0x10000
spi0.0: searching for MyLoader partition table at offset 0x20000
spi0.0: searching for MyLoader partition table at offset 0x30000
spi0.0: searching for MyLoader partition table at offset 0x40000
spi0.0: no MyLoader partition table found
Searching for RedBoot partition table in spi0.0 at offset 0x3fe000
Searching for RedBoot partition table in spi0.0 at offset 0x3ff000
No RedBoot partition table detected in spi0.0
Creating 5 MTD partitions on "spi0.0":
0x000000000000-0x000000020000 : "u-boot"
0x000000020000-0x000000140000 : "kernel"
0x000000140000-0x0000003f0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=387000, len=69000
0x000000387000-0x0000003f0000 : "rootfs_data"
0x0000003f0000-0x000000400000 : "art"
0x000000020000-0x0000003f0000 : "firmware"
ag71xx_mdio: probed
eth0: Atheros AG71xx at 0xba000000, irq 5
eth0: Found an AR7240 built-in switch
eth1: Atheros AG71xx at 0xb9000000, irq 4
eth1: connected to PHY at ag71xx-mdio:04 [uid=004dd041, driver=Generic PHY]
Atheros AR71xx hardware watchdog driver version 0.1.0
ar71xx-wdt: timeout=15 secs (max=21)
TCP westwood registered
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 136k freed
Please be patient, while OpenWrt loads ...
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.3.1
Registered led device: tl-mr3420:green:system
Registered led device: tl-mr3420:green:qss
Registered led device: tl-mr3420:green:3g
eth0: link up (1000Mbps/Full duplex)
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1: new high speed USB device using ar71xx-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 0:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
scsi 1:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
sd 1:0:0:0: [sda] 61521920 512-byte logical blocks: (31.4 GB/29.3 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 0f 00 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
usb-storage: device scan complete
usb-storage: device scan complete
sd 1:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI removable disk
usb 1-1: usbfs: process 320 (usb_modeswitch) did not claim interface 0 before use
usb 1-1: USB disconnect, address 2
usb 1-1: new high speed USB device using ar71xx-ehci and address 3
usb 1-1: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 2:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
scsi 3:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
usb-storage: device scan complete
sd 3:0:0:0: [sda] 61521920 512-byte logical blocks: (31.4 GB/29.3 GiB)
usb-storage: device scan complete
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 0f 00 00 00
sd 3:0:0:0: [sda] Assuming drive cache: write through
sd 3:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2
sd 3:0:0:0: [sda] Assuming drive cache: write through
sd 3:0:0:0: [sda] Attached SCSI removable disk
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 335917
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 335917
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
eth0: link down
eth0: link up (1000Mbps/Full duplex)
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
Compat-wireless backport release: compat-wireless-2011-11-29
Backport based on wireless-testing.git master-2011-12-01
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
PCI: Setting latency timer of device 0000:00:00.0 to 64
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xb0000000, irq=48
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
nf_conntrack version 0.5.0 (462 buckets, 1848 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
xt_time: kernel timezone is -0000
        Hooked IMQ after mangle on PREROUTING
        Hooked IMQ after nat on POSTROUTING
IMQ driver loaded successfully.
ip_set version 4 loaded
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
option 1-1:1.0: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
option 1-1:1.1: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
option 1-1:1.2: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
option 1-1:1.3: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 335885
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 335885
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 335885
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 344070
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 344070
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 344070
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
cfg80211: Calling CRDA for country: PL
cfg80211: Regulatory domain changed to country: PL
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 335885
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 335885
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 335885
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 335885
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 344070
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 335885
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 344070
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 344070
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 344070
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
ipt_bandwidth: timezone shift of 120 minutes detected, adjusting
               old minutes west=0, new minutes west=-120
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 335885
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 335885
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 335885
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 335885
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
ar71xx-wdt: enabling watchdog timer

no i mount

root@Gargoyle:/overlay$ mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime,size=14796k)
tmpfs on /dev type tmpfs (rw,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
none on /proc/bus/usb type usbfs (rw,relatime)
/dev/sda2 on /overlay type ext2 (rw,noatime,errors=continue)
mini_fo:/overlay on / type mini_fo (rw,relatime)

te errory to ważne ?

85 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: Installacja i deinstalacja pakietów na MR3420

Powinieneś wcześniej sprawdzić system plików. Extroot sam tego nie naprawi przecież, a już wcześniej miałeś błędy.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

86 Odpowiedź przez macmus

  • macmus
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2009-08-12
  • Posty: 317

Odp: Installacja i deinstalacja pakietów na MR3420

jak to teraz zrobić bezboleśnie ?

87 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: Installacja i deinstalacja pakietów na MR3420

http://eko.one.pl/forum/viewtopic.php?pid=21214#p21214

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

88 Odpowiedź przez macmus

  • macmus
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2009-08-12
  • Posty: 317

Odp: Installacja i deinstalacja pakietów na MR3420

ok wszystko FUNGA!!!

Dzięki Cezary jak zawsze niezawodna pomoc na forum smile

89 Odpowiedź przez macmus

  • macmus
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2009-08-12
  • Posty: 317

Odp: Installacja i deinstalacja pakietów na MR3420

nie chwal dnia przed zachodem smile

pojawił mi się podobny problem jak opisany:

http://eko.one.pl/forum/viewtopic.php?id=3696

czy ten skrypt wystrczy ?

#!/bin/sh
    if ! ping -q -c 1 -W 10 8.8.8.8 > /dev/null; then
        echo 0 > /sys/devices/virtual/gpio/gpio6/value
        echo 1 > /sys/devices/virtual/gpio/gpio6/value
    fi

gdzie wstawić ten ifup o którym piszesz ?

90 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: Installacja i deinstalacja pakietów na MR3420

Po tych echo. Tam gdzie się pierwotnie znajdował.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

91 Odpowiedź przez macmus

  • macmus
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2009-08-12
  • Posty: 317

Odp: Installacja i deinstalacja pakietów na MR3420

bah ale z ext rootem to pójdzie ?

mam sympton, że po prostu mi się modem rozłącza/ usb działa.

92 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: Installacja i deinstalacja pakietów na MR3420

A, nie. Nie możesz wyłączyć usb jak extroota na nim masz. To tak jak być wyciągnął dysk podczas pracy windowsa.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

93 Odpowiedź przez macmus

  • macmus
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2009-08-12
  • Posty: 317

Odp: Installacja i deinstalacja pakietów na MR3420

czyli jak to obejść ?

ten skrypt testujący nie pomaga.

94 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,186

Odp: Installacja i deinstalacja pakietów na MR3420

Skrypt testujący tylko podnosi połączenie jeżeli go nie ma, nic więc jeżeli zawiesza Ci się modem to albo rezygnuj z extroota i rób jego reset, dodaj hub usb zasilany żeby sprawdzić czy to nie kwestia zasilania.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona