eth0: Atheros AG71xx at 0xb9000000, irq 4
eth0: using fixed link parameters
eth1: Atheros AG71xx at 0xba000000, irq 5
eth1: connected to PHY at rtl8366s:04 [uid=001cc960, driver=Generic PHY]
Atheros AR71xx hardware watchdog driver version 0.1.0
ar71xx-wdt: timeout=15 secs (max=25)
TCP westwood registered
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Freeing unused kernel memory: 152k freed
Please be patient, while OpenWrt loads ...
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.3.1
ar71xx: pll_reg 0xb8050010: 0x11110000
eth0: link up (1000Mbps/Full duplex)
Registered led device: wndr3700:green:power
Registered led device: wndr3700:orange:power
Registered led device: wndr3700:green:wps
Registered led device: wndr3700:orange:wps
Registered led device: wndr3700:green:wan
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ar71xx-ehci ar71xx-ehci: Atheros AR71xx built-in EHCI controller
ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ar71xx-ohci ar71xx-ohci: Atheros AR71xx built-in OHCI controller
ar71xx-ohci ar71xx-ohci: new USB bus registered, assigned bus number 2
ar71xx-ohci ar71xx-ohci: irq 14, io mem 0x1c000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1: new high speed USB device using ar71xx-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new high speed USB device using ar71xx-ehci and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.2: new high speed USB device using ar71xx-ehci and address 4
usb 1-1.2: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb 1-1.4: new high speed USB device using ar71xx-ehci and address 5
usb 1-1.4: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi 0:0:0:0: Direct-Access     ST310005 28AS                  PQ: 0 ANSI: 2 CCS
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 28 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
usb-storage: device scan complete
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 4
usb-storage: device scan complete
sd 1:0:0:0: [sdb] 7634944 512-byte logical blocks: (3.90 GB/3.64 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] Attached SCSI removable disk
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
ext3_orphan_cleanup: deleting unreferenced inode 134718
EXT3-fs: sdb1: 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
eth0: link down
ar71xx: pll_reg 0xb8050010: 0x11110000
eth0: link up (1000Mbps/Full duplex)
device eth0.1 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.1) entering forwarding state
Compat-wireless backport release: compat-wireless-2011-11-29
Backport based on wireless-testing.git master-2011-12-01
cfg80211: Calling CRDA to update world regulatory domain
ar71xx: pll_reg 0xb8050014: 0x1099
eth1: link up (100Mbps/Full duplex)
cfg80211: World regulatory domain updated:
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
PCI: Enabling device 0000:00:11.0 (0000 -> 0002)
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=48
PCI: Enabling device 0000:00:12.0 (0000 -> 0002)
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
cfg80211: Calling CRDA for country: US
ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Registered led device: ath9k-phy1
ieee80211 phy1: Atheros AR9280 Rev:2 mem=0xb0010000, irq=49
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PPP generic driver version 2.4.2
cfg80211: Regulatory domain changed to country: US
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
nf_conntrack version 0.5.0 (1981 buckets, 7924 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
xt_time: kernel timezone is -0000
        Hooked IMQ after mangle on PREROUTING
        Hooked IMQ after nat on POSTROUTING
IMQ driver loaded successfully.
ip_set version 4 loaded
Ebtables v2.0 registered
Registered led device: wndr3700:green:usb
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3297
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
fuse init (API version 7.13)
Adding 521380k swap on /dev/sdb2.  Priority:-1 extents:1 across:521380k
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
cfg80211: Calling CRDA for country: PL
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
cfg80211: Regulatory domain changed to country: PL
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
ipt_bandwidth: timezone shift of 120 minutes detected, adjusting
               old minutes west=0, new minutes west=-120
ar71xx-wdt: enabling watchdog timer
usb 1-1.3: new full speed USB device using ar71xx-ehci and address 6
usb 1-1.3: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usb 1-1.3: USB disconnect, address 6
usb 1-1.3: new full speed USB device using ar71xx-ehci and address 7
usb 1-1.3: configuration #1 chosen from 1 choice
option 1-1.3:1.0: GSM modem (1-port) converter detected
usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB0
option 1-1.3:1.1: GSM modem (1-port) converter detected
usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB1
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
scsi 5:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
usb-storage: device scan complete
root@Gargoyle:~$

Jun  5 21:35:45 Gargoyle user.info sysinit: setting up led USB
Jun  5 21:35:45 Gargoyle user.debug kernel: ar71xx-wdt: enabling watchdog timer
Jun  5 21:36:15 Gargoyle authpriv.info dropbear[3394]: Child connection from 192.168.1.5:1415
Jun  5 21:36:24 Gargoyle authpriv.notice dropbear[3394]: Password auth succeeded for 'root' from 192.168.1.5:1415
Jun  5 21:36:43 Gargoyle authpriv.info dropbear[3394]: Exit (root): Exited normally
Jun  5 21:36:46 Gargoyle authpriv.info dropbear[3401]: Child connection from 192.168.1.5:1416
Jun  5 21:37:01 Gargoyle authpriv.notice dropbear[3401]: Password auth succeeded for 'root' from 192.168.1.5:1416
Jun  5 21:37:06 Gargoyle daemon.info hostapd: wlan0: STA 14:36:05:a4:02:35 IEEE 802.11: authenticated
Jun  5 21:37:08 Gargoyle daemon.info hostapd: wlan0: STA 14:36:05:a4:02:35 IEEE 802.11: authenticated
Jun  5 21:37:08 Gargoyle daemon.info hostapd: wlan0: STA 14:36:05:a4:02:35 IEEE 802.11: associated (aid 1)
Jun  5 21:37:08 Gargoyle daemon.info hostapd: wlan0: STA 14:36:05:a4:02:35 WPA: pairwise key handshake completed (RSN)
Jun  5 21:37:12 Gargoyle daemon.info dnsmasq-dhcp[3296]: DHCPDISCOVER(br-lan) 0.0.0.0 14:36:05:a4:02:35
Jun  5 21:37:12 Gargoyle daemon.info dnsmasq-dhcp[3296]: DHCPOFFER(br-lan) 192.168.1.102 14:36:05:a4:02:35
Jun  5 21:37:12 Gargoyle daemon.info dnsmasq-dhcp[3296]: DHCPDISCOVER(br-lan) 0.0.0.0 14:36:05:a4:02:35
Jun  5 21:37:12 Gargoyle daemon.info dnsmasq-dhcp[3296]: DHCPOFFER(br-lan) 192.168.1.102 14:36:05:a4:02:35
Jun  5 21:37:12 Gargoyle daemon.info dnsmasq-dhcp[3296]: DHCPDISCOVER(br-lan) 0.0.0.0 14:36:05:a4:02:35
Jun  5 21:37:12 Gargoyle daemon.info dnsmasq-dhcp[3296]: DHCPOFFER(br-lan) 192.168.1.102 14:36:05:a4:02:35
Jun  5 21:37:12 Gargoyle daemon.info dnsmasq-dhcp[3296]: DHCPREQUEST(br-lan) 192.168.1.102 14:36:05:a4:02:35
Jun  5 21:37:12 Gargoyle daemon.info dnsmasq-dhcp[3296]: DHCPACK(br-lan) 192.168.1.102 14:36:05:a4:02:35
Jun  5 21:39:19 Gargoyle daemon.info hostapd: wlan0: STA 14:36:05:64:5f:69 IEEE 802.11: authenticated
Jun  5 21:39:19 Gargoyle daemon.info hostapd: wlan0: STA 14:36:05:64:5f:69 IEEE 802.11: associated (aid 2)
Jun  5 21:39:20 Gargoyle daemon.info hostapd: wlan0: STA 14:36:05:64:5f:69 WPA: pairwise key handshake completed (RSN)
Jun  5 21:39:21 Gargoyle authpriv.info dropbear[3466]: Child connection from 192.168.1.5:1417
Jun  5 21:39:23 Gargoyle daemon.info dnsmasq-dhcp[3296]: DHCPDISCOVER(br-lan) 14:36:05:64:5f:69
Jun  5 21:39:23 Gargoyle daemon.info dnsmasq-dhcp[3296]: DHCPOFFER(br-lan) 192.168.1.168 14:36:05:64:5f:69
Jun  5 21:39:23 Gargoyle daemon.info dnsmasq-dhcp[3296]: DHCPDISCOVER(br-lan) 14:36:05:64:5f:69
Jun  5 21:39:23 Gargoyle daemon.info dnsmasq-dhcp[3296]: DHCPOFFER(br-lan) 192.168.1.168 14:36:05:64:5f:69
Jun  5 21:39:25 Gargoyle daemon.info dnsmasq-dhcp[3296]: DHCPREQUEST(br-lan) 192.168.1.168 14:36:05:64:5f:69
Jun  5 21:39:25 Gargoyle daemon.info dnsmasq-dhcp[3296]: DHCPACK(br-lan) 192.168.1.168 14:36:05:64:5f:69 RM696
Jun  5 21:39:25 Gargoyle daemon.info dnsmasq-dhcp[3296]: DHCPREQUEST(br-lan) 192.168.1.168 14:36:05:64:5f:69
Jun  5 21:39:25 Gargoyle daemon.info dnsmasq-dhcp[3296]: DHCPACK(br-lan) 192.168.1.168 14:36:05:64:5f:69 RM696
Jun  5 21:39:28 Gargoyle authpriv.notice dropbear[3466]: Password auth succeeded for 'root' from 192.168.1.5:1417
Jun  5 21:39:48 Gargoyle authpriv.info dropbear[3466]: Exit (root): Exited normally
Jun  5 21:39:50 Gargoyle authpriv.info dropbear[3474]: Child connection from 192.168.1.5:1418
Jun  5 21:40:05 Gargoyle authpriv.notice dropbear[3474]: Password auth succeeded for 'root' from 192.168.1.5:1418
Jun  5 21:41:08 Gargoyle user.info kernel: usb 1-1.3: new full speed USB device using ar71xx-ehci and address 6
Jun  5 21:41:08 Gargoyle user.info kernel: usb 1-1.3: configuration #1 chosen from 1 choice
Jun  5 21:41:08 Gargoyle user.info kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Jun  5 21:41:08 Gargoyle user.debug kernel: usb-storage: device found at 6
Jun  5 21:41:08 Gargoyle user.debug kernel: usb-storage: waiting for device to settle before scanning
Jun  5 21:41:08 Gargoyle user.info kernel: usb 1-1.3: USB disconnect, address 6
Jun  5 21:41:09 Gargoyle user.info kernel: usb 1-1.3: new full speed USB device using ar71xx-ehci and address 7
Jun  5 21:41:09 Gargoyle user.info kernel: usb 1-1.3: configuration #1 chosen from 1 choice
Jun  5 21:41:09 Gargoyle user.info kernel: option 1-1.3:1.0: GSM modem (1-port) converter detected
Jun  5 21:41:09 Gargoyle user.info kernel: usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB0
Jun  5 21:41:09 Gargoyle user.info kernel: option 1-1.3:1.1: GSM modem (1-port) converter detected
Jun  5 21:41:09 Gargoyle user.info kernel: usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB1
Jun  5 21:41:09 Gargoyle user.info kernel: scsi5 : SCSI emulation for USB Mass Storage devices
Jun  5 21:41:09 Gargoyle user.debug kernel: usb-storage: device found at 7
Jun  5 21:41:09 Gargoyle user.debug kernel: usb-storage: waiting for device to settle before scanning
Jun  5 21:41:10 Gargoyle user.notice usb-modeswitch: 1-1.3:1.0: Manufacturer=HUAWEI_Technologies Product=HUAWEI_Mobile Serial=?
Jun  5 21:41:10 Gargoyle user.notice usb-modeswitch: 1-1.3:1.0: Selecting /etc/usb_modeswitch.d/12d1:1003 for mode switching
Jun  5 21:41:10 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:10 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:10 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:10 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:10 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:10 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:10 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:11 Gargoyle user.notice usb-modeswitch: 1-1.3:1.0: Manufacturer=HUAWEI_Technologies Product=HUAWEI_Mobile Serial=?
Jun  5 21:41:11 Gargoyle user.notice usb-modeswitch: 1-1.3:1.0: Selecting /etc/usb_modeswitch.d/12d1:1003 for mode switching
Jun  5 21:41:11 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:11 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:11 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:11 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:11 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:11 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:11 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:11 Gargoyle user.notice usb-modeswitch: 1-1.3:1.1: Manufacturer=HUAWEI_Technologies Product=HUAWEI_Mobile Serial=?
Jun  5 21:41:11 Gargoyle user.notice usb-modeswitch: 1-1.3:1.1: Selecting /etc/usb_modeswitch.d/12d1:1003 for mode switching
Jun  5 21:41:11 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:11 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:11 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:12 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:12 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:12 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:12 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:12 Gargoyle user.notice usb-modeswitch: 1-1.3:1.2: Manufacturer=HUAWEI_Technologies Product=HUAWEI_Mobile Serial=?
Jun  5 21:41:12 Gargoyle user.notice usb-modeswitch: 1-1.3:1.2: Selecting /etc/usb_modeswitch.d/12d1:1003 for mode switching
Jun  5 21:41:12 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:12 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:12 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:12 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:12 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:12 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:12 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jun  5 21:41:14 Gargoyle user.notice kernel: scsi 5:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Jun  5 21:41:14 Gargoyle user.debug kernel: usb-storage: device scan complete
root@Gargoyle:~$