root@Gargoyle:~$ dmesg
Linux version 2.6.32.27 (cezary@eko.one.pl) (gcc version 4.3.3 (GCC) ) #17 Thu Oct 13 17:07:12 CEST 2011
prom: fw_arg0=00000007, fw_arg1=a1f77fb0, fw_arg2=a1f78440, fw_arg3=00000008
MyLoader: sysp=01000000, boardp=02008000, parts=80a00000
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR9132 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00002000
On node 0 totalpages: 8192
free_area_init_node: node 0, pgdat 802e90b0, node_mem_map 81000000
  Normal zone: 64 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 8128 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=TL-WR1043ND
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 29228k/32768k available (2175k kernel code, 3540k reserved, 423k data, 152k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is TP-LINK TL-WR1043ND
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
yaffs Sep 16 2011 21:41:19 Installing. 
msgmni has been set to 57
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
Atheros AR71xx SPI Controller driver version 0.2.4
m25p80 spi0.0: s25sl064a (8192 Kbytes)
spi0.0: searching for MyLoader partition table at offset 0x10000
spi0.0: searching for MyLoader partition table at offset 0x20000
spi0.0: searching for MyLoader partition table at offset 0x30000
spi0.0: searching for MyLoader partition table at offset 0x40000
spi0.0: no MyLoader partition table found
Searching for RedBoot partition table in spi0.0 at offset 0x7e0000
Searching for RedBoot partition table in spi0.0 at offset 0x7f0000
No RedBoot partition table detected in spi0.0
spi0.0: no WRT160NL signature found
Creating 5 MTD partitions on "spi0.0":
0x000000000000-0x000000020000 : "u-boot"
0x000000020000-0x000000160000 : "kernel"
0x000000160000-0x0000007f0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=560000, len=290000 
0x000000560000-0x0000007f0000 : "rootfs_data"
0x0000007f0000-0x000000800000 : "art"
0x000000020000-0x0000007f0000 : "firmware"
Realtek RTL8366RB ethernet switch driver version 0.2.4
rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
rtl8366rb: probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
eth0: using fixed link parameters
Atheros AR71xx hardware watchdog driver version 0.1.0
ar71xx-wdt: timeout=15 secs (max=21)
TCP westwood registered
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 152k freed
Please be patient, while OpenWrt loads ...
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.3.1
ar71xx: pll_reg 0xb8050014: 0x1a000000
eth0: link up (1000Mbps/Full duplex)
Registered led device: tl-wr1043nd:green:usb
Registered led device: tl-wr1043nd:green:system
Registered led device: tl-wr1043nd:green:qss
Registered led device: tl-wr1043nd:green:wlan
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1: new high speed USB device using ar71xx-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new high speed USB device using ar71xx-ehci and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb 1-1.2: new full speed USB device using ar71xx-ehci and address 4
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.3: new full speed USB device using ar71xx-ehci and address 5
usb 1-1.3: configuration #1 chosen from 1 choice
usb 1-1.4: new high speed USB device using ar71xx-ehci and address 6
usb 1-1.4: configuration #1 chosen from 1 choice
scsi 0:0:0:0: Direct-Access     USB 2.0  SD/MMC Reader         PQ: 0 ANSI: 0 CCS
usb-storage: device scan complete
sd 0:0:0:0: [sda] 1961984 512-byte logical blocks: (1.00 GB/958 MiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
eth0: link down
ar71xx: pll_reg 0xb8050014: 0x1a000000
eth0: link up (1000Mbps/Full duplex)
device eth0.1 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.1) entering forwarding state
Compat-wireless backport release: compat-wireless-2011-08-25
Backport based on wireless-testing.git master-2011-09-14
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
cfg80211: Calling CRDA for country: US
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ip_tables: (C) 2000-2006 Netfilter Core Team
cfg80211: Regulatory domain changed to country: US
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
NET: Registered protocol family 24
nf_conntrack version 0.5.0 (459 buckets, 1836 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
xt_time: kernel timezone is -0000
    Hooked IMQ after mangle on PREROUTING
    Hooked IMQ after nat on POSTROUTING
IMQ driver loaded successfully.
ip_set version 4 loaded
Ebtables v2.0 registered
i2c /dev entries driver
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
Linux video capture interface: v2.00
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for pl2303
pl2303 1-1.2:1.0: pl2303 converter detected
usb 1-1.2: pl2303 converter now attached to ttyUSB0
pl2303 1-1.3:1.0: pl2303 converter detected
usb 1-1.3: pl2303 converter now attached to ttyUSB1
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
gspca: main v2.7.0 registered
usbcore: registered new interface driver ov519
ov519: registered
usbcore: registered new interface driver sonixb
sonixb: registered
usbcore: registered new interface driver sonixj
sonixj: registered
fuse init (API version 7.13)
uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1810)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
uvcvideo: Failed to initialize the device (-5).
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
Adding 160760k swap on /dev/sda2.  Priority:-1 extents:1 across:160760k 
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
cfg80211: Calling CRDA for country: PL
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
cfg80211: Regulatory domain changed to country: PL
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
ipt_bandwidth: timezone shift of 120 minutes detected, adjusting
               old minutes west=0, new minutes west=-120
ar71xx-wdt: enabling watchdog timer

root@Gargoyle:~$ opkg list_installed
badblocks - 1.41.11-1
base-files - 43.28-unknown
blkid - 1.41.11-1
block-hotplug - 0.1.0-2.1cj
block-mount - 0.1.0-2.1cj
bridge - 1.4-1
busybox - 1.15.3-2
bwmon-gargoyle - 1.5.x-1
chat - 2.4.4-16.1
comgt - 0.32-9cj
crda - 1.1.1-1
ddns-gargoyle - 1.5.x-1
disktype - 9-1
dnsmasq - 2.55-6
dosfsck - 3.0.9-1
dropbear - 0.53.1-4
e2fsprogs - 1.41.11-1
ebtables - 2.0.9-1-1
ewget - 1.5.x-1
fdisk - 2.13.0.1-4
firewall - 2-34
gargoyle - 1.5.x-6
gargoyle-firewall-util - 1.5.x-1
haserl - 0.9.26-1
hostapd-mini - 20110527-1
hotplug2 - 1.0-beta-3
httpd-gargoyle - 1.5.x-1
ip - 2.6.29-1-2
ipset - 4.1-1
iptables - 1.4.6-3.1cj
iptables-mod-bandwidth - 1.4.6-3.1cj
iptables-mod-conntrack - 1.4.6-3.1cj
iptables-mod-conntrack-extra - 1.4.6-3.1cj
iptables-mod-filter - 1.4.6-3.1cj
iptables-mod-imq - 1.4.6-3.1cj
iptables-mod-ipopt - 1.4.6-3.1cj
iptables-mod-iprange - 1.4.6-3.1cj
iptables-mod-ipset - 1.4.6-3.1cj
iptables-mod-nat - 1.4.6-3.1cj
iptables-mod-nat-extra - 1.4.6-3.1cj
iptables-mod-timerange - 1.4.6-3.1cj
iptables-mod-webmon - 1.4.6-3.1cj
iptables-mod-weburl - 1.4.6-3.1cj
iw - 0.9.22-2
kernel - 2.6.32.27-1cj
kmod-ath - 2.6.32.27+2011-09-14-1cj
kmod-ath9k - 2.6.32.27+2011-09-14-1cj
kmod-ath9k-common - 2.6.32.27+2011-09-14-1cj
kmod-button-hotplug - 2.6.32.27-1
kmod-cfg80211 - 2.6.32.27+2011-09-14-1cj
kmod-crc-ccitt - 2.6.32.27-1cj
kmod-crc16 - 2.6.32.27-1cj
kmod-crypto-aes - 2.6.32.27-1cj
kmod-crypto-arc4 - 2.6.32.27-1cj
kmod-crypto-core - 2.6.32.27-1cj
kmod-ebtables - 2.6.32.27-1cj
kmod-fs-autofs4 - 2.6.32.27-1cj
kmod-fs-exportfs - 2.6.32.27-1cj
kmod-fs-ext2 - 2.6.32.27-1cj
kmod-fs-ext3 - 2.6.32.27-1cj
kmod-fs-ext4 - 2.6.32.27-1cj
kmod-fs-mbcache - 2.6.32.27-1cj
kmod-fs-msdos - 2.6.32.27-1cj
kmod-fs-nfs - 2.6.32.27-1cj
kmod-fs-nfs-common - 2.6.32.27-1cj
kmod-fs-nfsd - 2.6.32.27-1cj
kmod-fs-vfat - 2.6.32.27-1cj
kmod-fuse - 2.6.32.27-1cj
kmod-i2c-core - 2.6.32.27-1cj
kmod-input-core - 2.6.32.27-1cj
kmod-input-gpio-buttons - 2.6.32.27-1cj
kmod-input-polldev - 2.6.32.27-1cj
kmod-ipt-bandwidth - 2.6.32.27-1cj
kmod-ipt-conntrack - 2.6.32.27-1cj
kmod-ipt-conntrack-extra - 2.6.32.27-1cj
kmod-ipt-core - 2.6.32.27-1cj
kmod-ipt-filter - 2.6.32.27-1cj
kmod-ipt-imq - 2.6.32.27-1cj
kmod-ipt-ipopt - 2.6.32.27-1cj
kmod-ipt-iprange - 2.6.32.27-1cj
kmod-ipt-ipset - 2.6.32.27+4.1-1
kmod-ipt-nat - 2.6.32.27-1cj
kmod-ipt-nat-extra - 2.6.32.27-1cj
kmod-ipt-nathelper - 2.6.32.27-1cj
kmod-ipt-timerange - 2.6.32.27-1cj
kmod-ipt-webmon - 2.6.32.27-1cj
kmod-ipt-weburl - 2.6.32.27-1cj
kmod-leds-gpio - 2.6.32.27-1cj
kmod-ledtrig-usbdev - 2.6.32.27-1cj
kmod-mac80211 - 2.6.32.27+2011-09-14-1cj
kmod-nls-base - 2.6.32.27-1cj
kmod-nls-cp1250 - 2.6.32.27-1cj
kmod-nls-cp1251 - 2.6.32.27-1cj
kmod-nls-cp437 - 2.6.32.27-1cj
kmod-nls-cp775 - 2.6.32.27-1cj
kmod-nls-cp850 - 2.6.32.27-1cj
kmod-nls-cp852 - 2.6.32.27-1cj
kmod-nls-cp866 - 2.6.32.27-1cj
kmod-nls-iso8859-1 - 2.6.32.27-1cj
kmod-nls-iso8859-13 - 2.6.32.27-1cj
kmod-nls-iso8859-15 - 2.6.32.27-1cj
kmod-nls-iso8859-2 - 2.6.32.27-1cj
kmod-nls-koi8r - 2.6.32.27-1cj
kmod-nls-utf8 - 2.6.32.27-1cj
kmod-ppp - 2.6.32.27-1cj
kmod-pppoe - 2.6.32.27-1cj
kmod-sched - 2.6.32.27-1cj
kmod-scsi-core - 2.6.32.27-1cj
kmod-textsearch - 2.6.32.27-1cj
kmod-tun - 2.6.32.27-1cj
kmod-usb-acm - 2.6.32.27-1cj
kmod-usb-core - 2.6.32.27-1cj
kmod-usb-printer - 2.6.32.27-1cj
kmod-usb-serial - 2.6.32.27-1cj
kmod-usb-serial-option - 2.6.32.27-1cj
kmod-usb-serial-pl2303 - 2.6.32.27-1cj
kmod-usb-serial-sierrawireless - 2.6.32.27-1cj
kmod-usb-storage - 2.6.32.27-1cj
kmod-usb-storage-extras - 2.6.32.27-1cj
kmod-usb2 - 2.6.32.27-1cj
kmod-video-core - 2.6.32.27-1cj
kmod-video-gspca-core - 2.6.32.27-1cj
kmod-video-gspca-ov519 - 2.6.32.27-1cj
kmod-video-gspca-sonixb - 2.6.32.27-1cj
kmod-video-gspca-sonixj - 2.6.32.27-1cj
kmod-video-uvc - 2.6.32.27-1cj
libblkid - 1.41.11-1
libc - 0.9.30.1-43.28
libcyassl - 1.6.5-3
libericstools - 1.5.x-1
libevent - 1.4.13-2
libevent2 - 2.0.14-1cj
libext2fs - 1.41.11-1
libgcc - 4.3.3+cs-43.28
libip4tc - 1.4.6-3.1cj
libiptbwctl - 1.5.x-1
libjpeg - 6b-1
libnl-tiny - 0.1-1
libopenssl - 0.9.8p-1
libpthread - 0.9.30.1-43.28
librt - 0.9.30.1-43.28
libuci - 12012009.6-4
libusb - 0.1.12-2
libuuid - 1.41.11-1
libwrap - 7.6-1
libxtables - 1.4.6-3.1cj
miniupnpd - 1.5.20110309-1
motion - 3.2.11.1-1
mtd - 13
nfs-kernel-server - 1.1.6-1
nfs-kernel-server-utils - 1.1.6-1
nfs-utils - 1.1.6-1
ntfs-3g - 2010.8.8-1-fuseint
ntpclient - 2007_365_1-1
openssh-sftp-server - 5.8p2-1
opkg - 576-1
oscam - 0.99.4svn-r2847-8
p910nd - 0.95-1
plugin-gargoyle-dark-one-theme - 1.5.x-1
plugin-gargoyle-ftp - 1.5.x-5
plugin-gargoyle-green-theme - 1.5.x-1
plugin-gargoyle-initd - 1.5.x-2
plugin-gargoyle-light-theme - 1.5.x-1
plugin-gargoyle-plugins - 1.5.x-1
plugin-gargoyle-theme-by-matei - 1.5.x-1
plugin-gargoyle-tor - 1.5.x-1
plugin-gargoyle-usb-printer - 1.5.x-1
plugin-gargoyle-xeye-theme - 1.5.x-1
portmap - 6.0-2
ppp - 2.4.4-16.1
ppp-mod-pppoe - 2.4.4-16.1
qos-gargoyle - 1.5.x-1
samba3 - 3.0.24-7
sha1sum - 1.5.x-1
swconfig - 9
tc - 2.6.29-1-2
tor - 0.2.2.34-2
uci - 12012009.6-4
udevtrigger - 106-1
usb-modeswitch - 1.1.9-1cj
usb-modeswitch-data - 20110805-1cj
uuidgen - 1.41.11-1
vsftpd - 2.3.4-1cj
webmon-gargoyle - 1.5.x-1
wireless-tools - 29-4
wol - 0.7.1-2
wpa-supplicant-mini - 20110527-1
wpad-mini - 20110527-1
zlib - 1.2.3-5

root@Gargoyle:~$ ls -al /dev/video*
ls: /dev/video*: No such file or directory