Do potestowania moje buildy z PPE-NSS (Packet Processing Engine + NSS WiFi) dla Xiaomi AX3600. Julius dopracował 'openwrt-ppe-nss' oraz branch 'ppe-nss', firmware działa bez uwag, nic się nie wiesza, w sieci około 80 urządzeń, w tym około 50 po WiFi -> żarówki, termostaty, kompy, telefony i AGD/RTV z WiFi. Póki co bardzo stabilnie. Zaaplikowane poprzednie patche Juliusa, wyeliminowany błąd '10Mbps/100Mbps RX no frames', także firmware PPE-NSS stał się całkiem przyjemny i używalny. Działa 'Hardware flow offloading' analogicznie jak w Filogic. Builder GitHub tworzy jeden uniwersalny obraz PPE-NSS z oboma firmware NSS 12.5 i NSS 11.4 dla MESH. Przełączenie do pracy z FW 11.4 dla MESH komendą j/n.
Na dziś - 02.11.2026:
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------------------------------
| OpenWrt SNAPSHOT, r0+38035-06531c585d (ppe-nss, FW 11.4 and 12.5) |
| |
| Build time: 2026-11-01 21:39 UTC |
| OpenWrt PPE-NSS build by @Payti, https://github.com/Payti |
-----------------------------------------------------------------------------
Dodatkowe info dla buildów:
dmesg
root@Xiaomi_AX3600 /root [#]# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.18.55 (runner@runnervmdkmh8) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 15.3.0 toolchain-eae4708b1a) 15.3.0, GNU ld (GNU Binutils) 2.46.1) #0 SMP Sat Oct 17 17:09:07 2026
[ 0.000000] Machine model: Xiaomi AX3600
[ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable memory@40000000
[ 0.000000] OF: reserved mem: 0x000000004a400000..0x000000004a4fffff (1024 KiB) nomap non-reusable tzapp@4a400000
[ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable bootloader@4a600000
[ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable sbl@4aa00000
[ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004abfffff (1024 KiB) nomap non-reusable smem@4ab00000
[ 0.000000] OF: reserved mem: 0x000000004ac00000..0x000000004affffff (4096 KiB) nomap non-reusable memory@4ac00000
[ 0.000000] OF: reserved mem: 0x000000004b000000..0x000000004e6fffff (56320 KiB) nomap non-reusable wcnss@4b000000
[ 0.000000] OF: reserved mem: 0x000000004e700000..0x000000004e7fffff (1024 KiB) nomap non-reusable q6_etr_dump@50f00000
[ 0.000000] OF: reserved mem: 0x000000004e800000..0x000000004e8fffff (1024 KiB) nomap non-reusable m3_dump@51000000
[ 0.000000] OF: reserved mem: 0x0000000051200000..0x00000000512fffff (1024 KiB) nomap non-reusable ramoops@51200000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff]
[ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff]
[ 0.000000] node 0: [mem 0x000000004a400000-0x000000004a4fffff]
[ 0.000000] node 0: [mem 0x000000004a500000-0x000000004a5fffff]
[ 0.000000] node 0: [mem 0x000000004a600000-0x000000004e8fffff]
[ 0.000000] node 0: [mem 0x000000004e900000-0x00000000511fffff]
[ 0.000000] node 0: [mem 0x0000000051200000-0x00000000512fffff]
[ 0.000000] node 0: [mem 0x0000000051300000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] psci: OSI mode supported.
[ 0.000000] psci: [Firmware Bug]: failed to set PC mode: -1
[ 0.000000] percpu: Embedded 20 pages/cpu s44120 r8192 d29608 u81920
[ 0.000000] pcpu-alloc: s44120 r8192 d29608 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait uart_en=1 root=/dev/ubiblock0_0
[ 0.000000] Unknown kernel command line parameters "uart_en=1", will be passed to user space.
[ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB
[ 0.000000] software IO TLB: mapped [mem 0x000000005f4c0000-0x000000005f5c0000] (1MB)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] arch_timer: cp15 timer running at 19.20MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000171] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000184] pid_max: default: 32768 minimum: 301
[ 0.004543] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.004557] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.014770] rcu: Hierarchical SRCU implementation.
[ 0.014781] rcu: Max phase no-delay instances is 1000.
[ 0.015099] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.015820] smp: Bringing up secondary CPUs ...
[ 0.016527] Detected VIPT I-cache on CPU1
[ 0.016692] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.017458] Detected VIPT I-cache on CPU2
[ 0.017578] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.018398] Detected VIPT I-cache on CPU3
[ 0.018517] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.018599] smp: Brought up 1 node, 4 CPUs
[ 0.018609] SMP: Total of 4 processors activated.
[ 0.018613] CPU: All CPU(s) started at EL1
[ 0.018617] CPU features: detected: 32-bit EL0 Support
[ 0.018623] CPU features: detected: CRC32 instructions
[ 0.018667] alternatives: applying system-wide alternatives
[ 0.018875] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.019168] Memory: 407136K/524288K available (9792K kernel code, 1050K rwdata, 3304K rodata, 960K init, 285K bss, 114152K reserved, 0K cma-reserved)
[ 0.028309] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.028402] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.028495] 28864 pages in range for non-PLT usage
[ 0.028500] 520384 pages in range for PLT usage
[ 0.030932] pinctrl core: initialized pinctrl subsystem
[ 0.033272] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.033813] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.033855] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.033889] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.034323] thermal_sys: Registered thermal governor 'step_wise'
[ 0.034388] cpuidle: using governor menu
[ 0.034631] ASID allocator initialised with 65536 entries
[ 0.041582] /soc@0/phy@84000: Fixed dependency cycle(s) with /soc@0/clock-controller@1800000
[ 0.041672] /soc@0/clock-controller@1800000: Fixed dependency cycle(s) with /soc@0/ethernet-pcs@7a00000
[ 0.041687] /soc@0/clock-controller@1800000: Fixed dependency cycle(s) with /soc@0/phy@84000
[ 0.041891] /soc@0/ethernet-pcs@7a00000: Fixed dependency cycle(s) with /soc@0/clock-controller@1800000
[ 0.042126] /soc@0/phy@84000: Fixed dependency cycle(s) with /soc@0/clock-controller@1800000
[ 0.045175] /soc@0/phy@84000: Fixed dependency cycle(s) with /soc@0/clock-controller@1800000
[ 0.045263] /soc@0/clock-controller@1800000: Fixed dependency cycle(s) with /soc@0/ethernet-pcs@7a00000
[ 0.045279] /soc@0/clock-controller@1800000: Fixed dependency cycle(s) with /soc@0/phy@84000
[ 0.068404] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 0.093404] SCSI subsystem initialized
[ 0.093636] usbcore: registered new interface driver usbfs
[ 0.093679] usbcore: registered new interface driver hub
[ 0.093746] usbcore: registered new device driver usb
[ 0.094055] qcom_scm: convention: smc arm 64
[ 0.096427] clocksource: Switched to clocksource arch_sys_counter
[ 0.100873] NET: Registered PF_INET protocol family
[ 0.101029] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.103085] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.103105] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.103128] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.103177] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.103322] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.103672] MPTCP token hash table entries: 512 (order: 2, 12288 bytes, linear)
[ 0.103860] UDP hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.103897] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.104455] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.104509] PCI: CLS 0 bytes, default 64
[ 0.106149] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[ 0.107007] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.107015] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.117565] qcom-pcie 20000000.pcie: host bridge /soc@0/pcie@20000000 ranges:
[ 0.117637] qcom-pcie 20000000.pcie: IO 0x0020200000..0x002020ffff -> 0x0000000000
[ 0.117672] qcom-pcie 20000000.pcie: MEM 0x0020220000..0x002fffffff -> 0x0020220000
[ 0.123362] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.124360] msm_serial 78b3000.serial: msm_serial: detected port #0
[ 0.124470] msm_serial 78b3000.serial: uartclk = 3686400
[ 0.124941] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 17, base_baud = 230400) is a MSM
[ 0.124980] msm_serial: console setup on port #0
[ 0.125022] printk: legacy console [ttyMSM0] enabled
[ 0.238545] qcom-pcie 20000000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 1024G
[ 0.245662] msm_serial: driver initialized
[ 0.466392] qcom-pcie 20000000.pcie: PCIe Gen.1 x1 link up
[ 1.043193] qcom-pcie 20000000.pcie: PCI host bridge to bus 0000:00
[ 1.048261] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.054405] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 1.059970] pci_bus 0000:00: root bus resource [mem 0x20220000-0x2fffffff]
[ 1.066213] pci 0000:00:00.0: [17cb:1002] type 01 class 0x060400 PCIe Root Port
[ 1.073012] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[ 1.080196] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 1.086092] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
[ 1.091310] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 1.097563] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 1.104382] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.115562] pci 0000:01:00.0: [168c:0050] type 00 class 0x028000 PCIe Endpoint
[ 1.118453] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x001fffff 64bit]
[ 1.125283] pci 0000:01:00.0: ROM [mem 0x00000000-0x0000ffff pref]
[ 1.132266] pci 0000:01:00.0: supports D1
[ 1.137831] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 1.142499] pci 0000:00:00.0: bridge window [mem 0x00200000-0x003fffff] to [bus 01-ff] add_size 100000 add_align 200000
[ 1.147671] pci 0000:00:00.0: bridge window [mem 0x20400000-0x206fffff]: assigned
[ 1.158239] pci 0000:00:00.0: BAR 0 [mem 0x20220000-0x20220fff]: assigned
[ 1.165876] pci 0000:01:00.0: BAR 0 [mem 0x20400000-0x205fffff 64bit]: assigned
[ 1.172705] pci 0000:01:00.0: ROM [mem 0x20600000-0x2060ffff pref]: assigned
[ 1.179765] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 1.187054] pci 0000:00:00.0: bridge window [mem 0x20400000-0x206fffff]
[ 1.191999] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 1.198945] pci_bus 0000:00: resource 5 [mem 0x20220000-0x2fffffff]
[ 1.204319] pci_bus 0000:01: resource 1 [mem 0x20400000-0x206fffff]
[ 1.213243] pcieport 0000:00:00.0: PME: Signaling with IRQ 27
[ 1.217132] pcieport 0000:00:00.0: AER: enabled with IRQ 27
[ 1.228787] loop: module loaded
[ 1.230295] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xaa
[ 1.231229] nand: ESMT GD9FS2G8F2A
[ 1.237865] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[ 1.241312] 13 fixed-partitions partitions found on MTD device qcom_nand.0
[ 1.248615] Creating 13 MTD partitions on "qcom_nand.0":
[ 1.255534] 0x000000000000-0x000000100000 : "0:sbl1"
[ 1.262369] 0x000000100000-0x000000200000 : "0:mibib"
[ 1.267284] 0x000000200000-0x000000500000 : "0:qsee"
[ 1.273606] 0x000000500000-0x000000580000 : "0:devcfg"
[ 1.276839] 0x000000580000-0x000000600000 : "0:rpm"
[ 1.281747] 0x000000600000-0x000000680000 : "0:cdt"
[ 1.286661] 0x000000680000-0x000000700000 : "0:appsblenv"
[ 1.291415] 0x000000700000-0x000000800000 : "0:appsbl"
[ 1.297327] 0x000000800000-0x000000880000 : "0:art"
[ 1.302166] 0x000000880000-0x000000900000 : "bdata"
[ 1.306760] 0x000000900000-0x000000a00000 : "pstore"
[ 1.311976] 0x000000a00000-0x000002dc0000 : "ubi_kernel"
[ 1.343051] 0x000002dc0000-0x000010000000 : "rootfs"
[ 1.500175] mtd: setting mtd12 (rootfs) as root device
[ 1.500474] mtdsplit: no squashfs found in "rootfs"
[ 1.511496] spmi_pmic_arb 200f000.spmi: PMIC arbiter version v2 (0x20010000)
[ 1.858263] i2c_dev: i2c /dev entries driver
[ 1.865433] sdhci: Secure Digital Host Controller Interface driver
[ 1.865479] sdhci: Copyright(c) Pierre Ossman
[ 1.870540] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.875234] qcom_rng e3000.rng: TRNG support not detected
[ 1.881332] clocksource: arch_mmio_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 1.885984] arch-timer-mmio b120000.timer: mmio timer running at 19.20MHz (virt)
[ 1.898158] remoteproc remoteproc0: releasing q6wcss
[ 1.908457] NET: Registered PF_INET6 protocol family
[ 1.910882] Segment Routing with IPv6
[ 1.914228] In-situ OAM (IOAM) with IPv6
[ 1.917859] NET: Registered PF_PACKET protocol family
[ 1.922011] 8021q: 802.1Q VLAN Support v1.8
[ 1.961210] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 1.961576] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[ 1.967370] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
[ 1.973942] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[ 1.981667] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[ 1.989182] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[ 1.998291] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV
[ 2.005195] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 808000 uV
[ 2.015201] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 872000 uV
[ 2.025012] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 944000 uV
[ 2.034869] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 745, quot_offset[ 7]= 0
[ 2.044627] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 946, quot_offset[ 7]= 200
[ 2.055476] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1058, quot_offset[ 7]= 110
[ 2.066414] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1194, quot_offset[ 7]= 135
[ 2.077632] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[ 2.415577] cpufreq: cpufreq_policy_online: CPU0: Running at unlisted initial frequency: 800000 kHz, changing to: 1017600 kHz
[ 2.423356] remoteproc remoteproc0: q6wcss is available
[ 2.757054] qca-ppe 3a000000.ppe: configuring for fixed/internal link mode
[ 2.757129] qca-ppe 3a000000.ppe: Link is Up - 1Gbps/Full - flow control off
[ 2.937301] qca-ppe 3a000000.ppe wan (uninitialized): PHY [90000.mdio-1:01] driver [Qualcomm QCA8075] (irq=POLL)
[ 3.006913] qca-ppe 3a000000.ppe lan1 (uninitialized): PHY [90000.mdio-1:02] driver [Qualcomm QCA8075] (irq=POLL)
[ 3.076926] qca-ppe 3a000000.ppe lan2 (uninitialized): PHY [90000.mdio-1:03] driver [Qualcomm QCA8075] (irq=POLL)
[ 3.156913] qca-ppe 3a000000.ppe lan3 (uninitialized): PHY [90000.mdio-1:04] driver [Qualcomm QCA8075] (irq=POLL)
[ 3.159597] qca-edma 3ab00000.edma eth0: entered promiscuous mode
[ 3.166219] DSA: tree 0 setup
[ 3.172675] ubi0: attaching mtd12
[ 3.786408] random: crng init done
[ 4.109224] ubi0: scanning is finished
[ 4.146943] ubi0: attached mtd12 (name "rootfs", size 210 MiB)
[ 4.146989] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.151682] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.158563] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.165398] ubi0: good PEBs: 1682, bad PEBs: 0, corrupted PEBs: 0
[ 4.172177] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[ 4.178429] ubi0: max/mean erase counter: 13/8, WL threshold: 4096, image sequence number: 1496300661
[ 4.185542] ubi0: available PEBs: 0, total reserved PEBs: 1682, PEBs reserved for bad PEB handling: 40
[ 4.194861] ubi0: background thread "ubi_bgt0d" started, PID 710
[ 4.204666] block ubiblock0_0: created from ubi0:0(rootfs)
[ 4.210370] clk: Disabling unused clocks
[ 4.215845] PM: genpd: Disabling unused power domains
[ 4.219785] check access for rdinit=/init failed: -2, ignoring
[ 4.222670] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 4.225016] Freeing unused kernel memory: 960K
[ 4.231889] Run /sbin/init as init process
[ 4.236046] with arguments:
[ 4.236053] /sbin/init
[ 4.236059] with environment:
[ 4.236065] HOME=/
[ 4.236070] TERM=linux
[ 4.236076] uart_en=1
[ 4.540687] init: Console is alive
[ 4.540852] init: - watchdog -
[ 5.369833] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 5.407018] gpio_button_hotplug: loading out-of-tree module taints kernel.
[ 5.413005] pstore: Using crash dump compression: deflate
[ 5.413077] printk: legacy console [ramoops-1] enabled
[ 5.419095] pstore: Registered ramoops as persistent store backend
[ 5.423301] ramoops: using 0x100000@0x51200000, ecc: 0
[ 5.444737] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 5.450637] init: - preinit -
[ 6.593407] qca-ppe 3a000000.ppe lan1: configuring for phy/psgmii link mode
[ 7.085364] qca-ppe 3a000000.ppe lan1: Link is Up - 1Gbps/Full - flow control off
[ 11.356075] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 11.356233] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 861
[ 11.386173] UBIFS (ubi0:1): recovery needed
[ 11.451672] UBIFS (ubi0:1): recovery completed
[ 11.451791] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 11.455021] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 11.462949] UBIFS (ubi0:1): FS size: 185384960 bytes (176 MiB, 1460 LEBs), max 1472 LEBs, journal size 9269248 bytes (8 MiB, 73 LEBs)
[ 11.472837] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 11.484802] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 5154A764-0FBB-4719-9698-5763929DB7DB, small LPT model
[ 11.495456] mount_root: switching to ubifs overlay
[ 11.506526] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 11.512368] urandom-seed: Seeding with /etc/urandom.seed
[ 11.646400] qca-ppe 3a000000.ppe lan1: Link is Down
[ 11.652494] procd: - early -
[ 11.652614] procd: - watchdog -
[ 12.237348] procd: - watchdog -
[ 12.238804] procd: - ubus -
[ 12.391238] procd: - init -
[ 12.991684] kmodloader: loading kernel modules from /etc/modules.d/*
[ 13.109583] urngd: v1.0.2 started.
[ 13.156956] tun: Universal TUN/TAP device driver, 1.6
[ 13.165930] l2tp_core: L2TP core driver, V2.0
[ 13.167229] l2tp_netlink: L2TP netlink interface
[ 13.171180] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 13.179251] nat46: module (version adb2f72e6fb81ee11b54513d384b68e3c3d93464) loaded.
[ 13.182460] gre: GRE over IPv4 demultiplexer driver
[ 13.189307] ip_gre: GRE over IPv4 tunneling driver
[ 13.196893] ip6_gre: GRE over IPv6 tunneling driver
[ 13.211534] GACT probability on
[ 13.212812] Mirror/redirect action on
[ 13.222537] u32 classifier
[ 13.222582] input device check on
[ 13.224146] Actions configured
[ 13.270007] Loading modules backported from Linux version v7.2-0-g8d3ae59288f1
[ 13.270065] Backport generated by backports.git v5.15.58-1-198-g2580fa90cb79
[ 13.293690] NET: Registered PF_QIPCRTR protocol family
[ 13.315118] xt_time: kernel timezone is -0000
[ 13.450423] PPP generic driver version 2.4.2
[ 13.451719] NET: Registered PF_PPPOX protocol family
[ 13.454800] PPTP driver version 0.8.5
[ 13.462665] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 13.462719] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 13.488904] ath10k 7.2 driver, optimized for CT firmware, probing pci device: 0x50.
[ 13.489513] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 13.495852] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 14.385843] ath10k_pci 0000:01:00.0: qca9887 hw1.0 target 0x4100016d chip_id 0x004000ff sub 0000:0000
[ 14.385914] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 14.394309] ath10k_pci 0000:01:00.0: firmware ver 10.1-ct-87-__fW-022-d8dab8e8 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,peer-fixed-rate,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 81827605
[ 14.431383] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 b4ce36fa
[ 15.299782] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
[ 15.306327] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
[ 15.306392] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
[ 15.312552] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 24400 iram: 24364'
[ 15.344480] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal nvmem max-sta 128 raw 0 hwcrypto 1
[ 15.356784] ath10k_pci 0000:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 15.457703] ath: EEPROM regdomain: 0x0
[ 15.457716] ath: EEPROM indicates default country code should be used
[ 15.457722] ath: doing EEPROM country->regdmn map search
[ 15.457730] ath: country maps to regdmn code: 0x3a
[ 15.457736] ath: Country alpha2 being used: US
[ 15.457742] ath: Regpair used: 0x3a
[ 15.509054] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 15.519445] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 18.070089] ath11k c000000.wifi: ipq8074 hw2.0
[ 18.070145] ath11k c000000.wifi: FW memory mode: 1
[ 18.112545] remoteproc remoteproc0: powering up q6wcss
[ 18.181534] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[ 19.318737] remoteproc remoteproc0: remote processor q6wcss is now up
[ 19.370372] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
[ 19.370437] ath11k c000000.wifi: fw_version 0x290b84a5 fw_build_timestamp 2024-09-23 11:32 fw_build_id WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
[ 24.457150] remoteproc remoteproc0: stopped remote processor q6wcss
[ 24.457206] remoteproc remoteproc0: powering up q6wcss
[ 24.462332] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[ 24.814904] remoteproc remoteproc0: remote processor q6wcss is now up
[ 24.866429] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
[ 24.866499] ath11k c000000.wifi: fw_version 0x290b84a5 fw_build_timestamp 2024-09-23 11:32 fw_build_id WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
[ 25.038763] ath11k c000000.wifi: htt event 48 not handled
[ 25.053167] nss-wifi-drv: radio 0 rxdma id 128 base 0x48a50000 x4096 hw 0xc000000/0xc000000 swdesc 12288
[ 25.067853] nss-wifi-drv: radio 1 rxdma id 143 base 0x499e0000 x4096 hw 0xc000000/0xc000000 swdesc 12288
[ 28.974543] nss-wifi-drv 39000000.nss: loaded qca-nss0-retail-11.4.bin, line 11.4, 835960 bytes at 0x0000000040000000
[ 29.003550] nss-wifi-drv 39000000.nss: core 0 booted
[ 29.015188] nss-wifi-drv 39000000.nss: payload pool set to 16384: 0
[ 29.015454] nss-wifi-drv 39000000.nss: payload pool 8704 low 4352 high 16384: 0
[ 29.029594] nss-wifi-drv 39000000.nss: packet descriptors: 757 pages of 4096 lent: 0
[ 29.029736] nss-wifi-drv 39000000.nss: load reports off at 1689600000 Hz: 0 ack 1
[ 29.037187] nss-wifi-drv 39000000.nss: wan: port 2 routes in the firmware, vsi 1
[ 29.044477] nss-wifi-drv 39000000.nss: lan1: port 3 routes in the firmware, vsi 2
[ 29.052002] nss-wifi-drv 39000000.nss: lan2: port 4 routes in the firmware, vsi 3
[ 29.059370] nss-wifi-drv 39000000.nss: lan3: port 5 routes in the firmware, vsi 4
[ 29.106580] nss-wifi-drv 39000000.nss: wifili: txdesc 0x0000000053500000+15000 ext 0x0000000053540000+29000, 2 pools, 3 tcl, 4 reo
[ 29.106661] nss-wifi-drv 39000000.nss: wifili: tcl0 id 16 base 0x46030000 x512 txcomp id 106 base 0x47e00000 x32768 hw 0xca34910/0xca370c0 tclhw 0xca44510/0xca46000 tcle 8
[ 29.117290] nss-wifi-drv 39000000.nss: wifili: tcl1 id 17 base 0x45728000 x512 txcomp id 107 base 0x48000000 x32768 hw 0xca34968/0xca370c8 tclhw 0xca44568/0xca46008 tcle 8
[ 29.132816] nss-wifi-drv 39000000.nss: wifili: tcl2 id 18 base 0x463b0000 x512 txcomp id 108 base 0x48200000 x32768 hw 0xca349c0/0xca370d0 tclhw 0xca445c0/0xca46010 tcle 8
[ 29.148260] nss-wifi-drv 39000000.nss: wifili: shadow rd 0x44b20000 wr 0x46324000 lmac from 128
[ 29.163703] nss-wifi-drv 39000000.nss: wifili: reo0 id 0 base 0x48a80000 x2048 hw 0xca3829c/0xca3b038
[ 29.172204] nss-wifi-drv 39000000.nss: wifili: reo1 id 1 base 0x48ac0000 x2048 hw 0xca382f4/0xca3b040
[ 29.181577] nss-wifi-drv 39000000.nss: wifili: reo2 id 2 base 0x48b00000 x2048 hw 0xca3834c/0xca3b048
[ 29.190777] nss-wifi-drv 39000000.nss: wifili: reo3 id 3 base 0x48b40000 x2048 hw 0xca383a4/0xca3b050
[ 29.199981] nss-wifi-drv 39000000.nss: wifili: radio 0 rxdma id 128 base 0x48a50000 x4096 hw 0xc000000/0xc000000 swdesc 12288
[ 29.209186] nss-wifi-drv 39000000.nss: wifili: radio 1 rxdma id 143 base 0x499e0000 x4096 hw 0xc000000/0xc000000 swdesc 12288
[ 29.238807] nss-wifi-drv 39000000.nss: mesh forwarding: yes
[ 30.823228] qca-ppe 3a000000.ppe lan1: configuring for phy/psgmii link mode
[ 30.977863] br-lan: port 1(lan1) entered blocking state
[ 30.977929] br-lan: port 1(lan1) entered disabled state
[ 30.981964] qca-ppe 3a000000.ppe lan1: entered allmulticast mode
[ 30.987165] qca-edma 3ab00000.edma eth0: entered allmulticast mode
[ 30.993852] qca-ppe 3a000000.ppe lan1: entered promiscuous mode
[ 31.008369] qca-ppe 3a000000.ppe lan2: configuring for phy/psgmii link mode
[ 31.167482] br-lan: port 2(lan2) entered blocking state
[ 31.167549] br-lan: port 2(lan2) entered disabled state
[ 31.171738] qca-ppe 3a000000.ppe lan2: entered allmulticast mode
[ 31.177357] qca-ppe 3a000000.ppe lan2: entered promiscuous mode
[ 31.187290] qca-ppe 3a000000.ppe lan3: configuring for phy/psgmii link mode
[ 31.349672] qca-ppe 3a000000.ppe lan3: Link is Up - 100Mbps/Full - flow control off
[ 31.349774] br-lan: port 3(lan3) entered blocking state
[ 31.356197] br-lan: port 3(lan3) entered disabled state
[ 31.361456] qca-ppe 3a000000.ppe lan3: entered allmulticast mode
[ 31.367046] qca-ppe 3a000000.ppe lan3: entered promiscuous mode
[ 31.373720] br-lan: port 3(lan3) entered blocking state
[ 31.378522] br-lan: port 3(lan3) entered forwarding state
[ 31.387814] qca-ppe 3a000000.ppe wan: configuring for phy/psgmii link mode
[ 31.593142] ath: EEPROM regdomain: 0x824f
[ 31.593197] ath: EEPROM indicates we should expect a country code
[ 31.596157] ath: doing EEPROM country->regdmn map search
[ 31.602292] ath: country maps to regdmn code: 0x10
[ 31.607654] ath: Country alpha2 being used: PA
[ 31.612206] ath: Regpair used: 0x10
[ 31.616665] ath: regdomain 0x824f dynamically updated by user
[ 32.831559] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
[ 32.838115] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
[ 32.838174] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
[ 32.844354] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 24400 iram: 24364'
[ 32.888612] ath10k_pci 0000:01:00.0: pdev param 0 not supported by firmware
[ 32.893452] ath10k_pci 0000:01:00.0: rts threshold -1
[ 32.895417] ath10k_pci 0000:01:00.0 phy0-ap0: routed by NSS core 0, nodes 30/31
[ 32.901230] br-lan: port 4(phy0-ap0) entered blocking state
[ 32.906829] br-lan: port 4(phy0-ap0) entered disabled state
[ 32.912387] ath10k_pci 0000:01:00.0 phy0-ap0: entered allmulticast mode
[ 32.918197] ath10k_pci 0000:01:00.0 phy0-ap0: entered promiscuous mode
[ 33.425697] br-lan: port 4(phy0-ap0) entered blocking state
[ 33.425777] br-lan: port 4(phy0-ap0) entered forwarding state
[ 33.811094] nss-wifi-drv 39000000.nss: vdev 0 on radio 0 is interface 32, encap 2 decap 2
[ 33.826633] nss-wifi-drv 39000000.nss: peer 9c:9d:7e:76:2a:1c: id 1 ast_idx 743 ast_hash 0x2e7 vdev 0
[ 33.828342] br-lan: port 5(phy1-ap0) entered blocking state
[ 33.834873] br-lan: port 5(phy1-ap0) entered disabled state
[ 33.840370] ath11k c000000.wifi phy1-ap0: entered allmulticast mode
[ 33.846083] ath11k c000000.wifi phy1-ap0: entered promiscuous mode
[ 33.852562] br-lan: port 5(phy1-ap0) entered blocking state
[ 33.858365] br-lan: port 5(phy1-ap0) entered forwarding state
[ 33.864837] br-lan: port 5(phy1-ap0) entered disabled state
[ 34.081345] qca-ppe 3a000000.ppe lan1: Link is Up - 1Gbps/Full - flow control off
[ 34.081474] br-lan: port 1(lan1) entered blocking state
[ 34.087902] br-lan: port 1(lan1) entered forwarding state
[ 34.097249] nss-wifi-drv 39000000.nss: vdev 1 on radio 1 is interface 33, encap 2 decap 2
[ 34.105642] nss-wifi-drv 39000000.nss: peer 9c:9d:7e:76:2a:1b: id 3 ast_idx 311 ast_hash 0x137 vdev 1
[ 34.109140] br-lan: port 6(phy2-ap0) entered blocking state
[ 34.115909] br-lan: port 6(phy2-ap0) entered disabled state
[ 34.121417] ath11k c000000.wifi phy2-ap0: entered allmulticast mode
[ 34.127235] ath11k c000000.wifi phy2-ap0: entered promiscuous mode
[ 34.255638] br-lan: port 6(phy2-ap0) entered blocking state
[ 34.255714] br-lan: port 6(phy2-ap0) entered forwarding state
[ 34.396488] l11: disabling
[ 35.025729] br-lan: port 5(phy1-ap0) entered blocking state
[ 35.025800] br-lan: port 5(phy1-ap0) entered forwarding state
[ 35.036482] qcom,gcc-ipq8074 1800000.clock-controller: sync_state() pending due to 1868010.nss-common
[ 40.462398] nss-wifi-drv 39000000.nss: peer 48:b4:23:b8:b3:d2: id 4 ast_idx 103 ast_hash 0x67 vdev 0
[ 40.596680] nss-wifi-drv 39000000.nss: interface 32 protects frames with 6
root@Xiaomi_AX3600 /root [#]#
lsmod
root@Xiaomi_AX3600 /root [#]# lsmod
act_gact 12288 0
act_mirred 16384 0
act_pedit 16384156
act_police 16384 0
act_skbedit 16384162
act_vlan 12288 0
ath 28672 1 ath10k_core
ath10k_core 499712 1 ath10k_pci
ath10k_pci 53248 0
ath11k 512000 1 ath11k_ahb
ath11k_ahb 24576 0
bonding 167936 0
cfg80211 405504 4 ath11k,ath10k_core,ath,mac80211
cls_basic 12288 0
cls_flow 20480 0
cls_flower 49152 16
cls_fw 16384 0
cls_matchall 16384 0
cls_route 16384 0
cls_u32 20480 6
cmac 12288 0
compat 12288 3 ath11k_ahb,mac80211,cfg80211
crc_ccitt 12288 1 ppp_async
crc32c_cryptoapi 12288 0
drbg 24576 0
dwc3 53248 1 dwc3_qcom
dwc3_qcom 20480 0
dwc3_qcom_legacy 16384 0
em_u32 12288 0
ext4 466944 0
geniv 12288 1 seqiv
gpio_button_hotplug 20480 0
gre 12288 3 pptp,ip6_gre,ip_gre
hmac 16384 0
ifb 12288 0
ip_gre 24576 0
ip_tables 24576 2 iptable_mangle,iptable_filter
ip_tunnel 24576 2 ip_gre,sit
ip6_gre 32768 0
ip6_tunnel 36864 1 ip6_gre
ip6_udp_tunnel 16384 3 wireguard,l2tp_core,vxlan
ipt_REJECT 12288 0
iptable_filter 12288 0
iptable_mangle 12288 0
jbd2 77824 1 ext4
jitterentropy_rng 16384 0
l2tp_core 28672 2 l2tp_ppp,l2tp_netlink
l2tp_netlink 20480 1 l2tp_ppp
l2tp_ppp 24576 0
leds_gpio 12288 0
libchacha 16384 1 libchacha20poly1305
libchacha20poly1305 12288 1 wireguard
libcurve25519 32768 1 wireguard
libpoly1305 16384 1 libchacha20poly1305
libsha512 24576 1 sha512
mac80211 753664 2 ath11k,ath10k_core
macvlan 24576 0
mbcache 12288 1 ext4
michael_mic 12288 0
nat46 36864 0
nf_conncount 20480 1 xt_connlimit
nf_conntrack 102400 18 nss_wifi_drv,xt_connlimit,nft_flow_offload,nf_flow_table,nf_conncount,xt_state,xt_helper,xt_conntrack,xt_connmark,xt_connbytes,xt_CT,nft_redir,nft_nat,nft_masq,nft_ct,nf_nat,nf_conntrack_netlink,nf_conntrack_bridge
nf_conntrack_bridge 12288 1
nf_conntrack_netlink 36864 0
nf_defrag_ipv4 12288 1 nf_conntrack
nf_defrag_ipv6 20480 3 nf_conntrack_bridge,nf_conntrack,nat46
nf_flow_table 36864 2 nft_flow_offload,nf_flow_table_inet
nf_flow_table_inet 12288 1
nf_log_syslog 20480 0
nf_nat 36864 4 nft_redir,nft_nat,nft_masq,nft_chain_nat
nf_reject_ipv4 12288 4 nft_reject_ipv4,nft_reject_inet,nft_reject_bridge,ipt_REJECT
nf_reject_ipv6 16384 3 nft_reject_ipv6,nft_reject_inet,nft_reject_bridge
nf_tables 229376247 nft_flow_offload,nft_fib_inet,nf_flow_table_inet,nf_flow_table,nft_reject_ipv6,nft_reject_ipv4,nft_reject_inet,nft_reject_bridge,nft_reject,nft_redir,nft_quota,nft_numgen,nft_nat,nft_meta_bridge,nft_masq,nft_log,nft_limit,nft_hash,nft_fib_ipv6,nft_fib_ipv4,nft_fib,nft_ct,nft_chain_nat
nfnetlink 16384 3 nf_tables,nf_conntrack_netlink
nft_chain_nat 12288 2
nft_ct 20480 7
nft_fib 12288 3 nft_fib_inet,nft_fib_ipv6,nft_fib_ipv4
nft_fib_inet 12288 0
nft_fib_ipv4 12288 1 nft_fib_inet
nft_fib_ipv6 12288 1 nft_fib_inet
nft_flow_offload 12288 1
nft_hash 12288 0
nft_limit 12288 5
nft_log 12288 0
nft_masq 12288 1
nft_meta_bridge 12288 0
nft_nat 12288 0
nft_numgen 12288 0
nft_quota 12288 0
nft_redir 12288 0
nft_reject 12288 4 nft_reject_ipv6,nft_reject_ipv4,nft_reject_inet,nft_reject_bridge
nft_reject_bridge 12288 0
nft_reject_inet 12288 2
nft_reject_ipv4 12288 1
nft_reject_ipv6 12288 0
nss_wifi_drv 188416 1 ath11k
ppp_async 16384 0
ppp_generic 40960 5 pppoe,ppp_async,l2tp_ppp,pptp,pppox
pppoe 24576 0
pppox 12288 3 pppoe,l2tp_ppp,pptp
pptp 24576 0
pstore 20480 2 ramoops
qmi_helpers 24576 1 ath11k
qrtr 28672 3 qrtr_smd
qrtr_smd 16384 0
ramoops 24576 0
reed_solomon 16384 1 ramoops
sch_cake 36864 0
sch_ets 20480 0
sch_gred 20480 0
sch_hfsc 24576 0
sch_htb 28672 0
sch_ingress 12288 7
sch_mqprio 16384 0
sch_mqprio_lib 12288 1 sch_mqprio
sch_prio 16384 0
sch_red 16384 0
sch_tbf 16384 0
seqiv 12288 0
sha3_generic 12288 0
sha512 16384 0
sit 28672 0
slhc 12288 1 ppp_generic
tls 94208 1 bonding
tun 53248 0
tunnel4 12288 1 sit
tunnel6 12288 1 ip6_tunnel
udp_tunnel 24576 3 wireguard,l2tp_core,vxlan
vxlan 102400 0
wireguard 77824 0
x_tables 32768 21 xt_connlimit,xt_state,xt_helper,xt_conntrack,xt_connmark,xt_connbytes,xt_CT,iptable_mangle,iptable_filter,ipt_REJECT,ip_tables,xt_time,xt_tcpudp,xt_recent,xt_multiport,xt_mark,xt_mac,xt_limit,xt_comment,xt_TCPMSS,xt_LOG
xhci_hcd 172032 2 xhci_plat_hcd,xhci_pci
xhci_pci 20480 0
xhci_plat_hcd 12288 0
xt_CT 12288 0
xt_LOG 16384 0
xt_TCPMSS 12288 0
xt_comment 12288 0
xt_connbytes 12288 0
xt_connlimit 12288 0
xt_connmark 12288 0
xt_conntrack 12288 0
xt_helper 12288 0
xt_limit 12288 0
xt_mac 12288 0
xt_mark 12288 0
xt_multiport 16384 0
xt_recent 20480 0
xt_state 12288 0
xt_tcpudp 16384 0
xt_time 12288 0
root@Xiaomi_AX3600 /root [#]#
ls -al /lib/firmware
root@Xiaomi_AX3600 /root [#]# ls -al /lib/firmware/
drwxr-xr-x 1 root root 224 Oct 17 19:09 .
drwxr-xr-x 1 root root 296 Oct 17 19:09 ..
drwxr-xr-x 2 root root 311 Oct 17 19:09 IPQ8074
drwxr-xr-x 3 root root 30 Oct 17 19:09 ath10k
drwxr-xr-x 1 root root 224 Oct 17 19:09 ath11k
-rw-r--r-- 1 root root 835960 Oct 17 19:09 qca-nss0-retail-11.4.bin
-rw-r--r-- 1 root root 836448 Oct 17 19:09 qca-nss0-retail-12.5.bin
lrwxrwxrwx 1 root root 24 Oct 17 19:09 qca-nss0-retail.bin -> qca-nss0-retail-12.5.bin
-rw-r--r-- 1 root root 292296 Oct 17 19:09 qca-nss1-retail-11.4.bin
-rw-r--r-- 1 root root 295356 Oct 17 19:09 qca-nss1-retail-12.5.bin
lrwxrwxrwx 1 root root 24 Oct 17 19:09 qca-nss1-retail.bin -> qca-nss1-retail-12.5.bin
-rw-r--r-- 1 root root 6332 Oct 17 19:09 regulatory.db
root@Xiaomi_AX3600 /root [#]#
Włączenie NSS FW 11.4 dla WiFi offload + MESH:
uci set nss-wifi.general.firmware='11.4'; uci commit nss-wifi; reboot
Włączenie WiFi offload:
uci set nss-wifi.general.offload='1'; uci commit nss-wifi; reboot
logread -e ppe
root@Xiaomi_AX3600 /root [#]# logread -e ppe
Sun Oct 18 17:55:17 2026 kern.info kernel: [ 0.000000] software IO TLB: mapped [mem 0x000000005f4c0000-0x000000005f5c0000] (1MB)
Sun Oct 18 17:55:17 2026 kern.info kernel: [ 0.000170] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
Sun Oct 18 17:55:17 2026 kern.info kernel: [ 2.776789] qca-ppe 3a000000.ppe: configuring for fixed/internal link mode
Sun Oct 18 17:55:17 2026 kern.info kernel: [ 2.776865] qca-ppe 3a000000.ppe: Link is Up - 1Gbps/Full - flow control off
Sun Oct 18 17:55:17 2026 kern.info kernel: [ 2.957000] qca-ppe 3a000000.ppe wan (uninitialized): PHY [90000.mdio-1:01] driver [Qualcomm QCA8075] (irq=POLL)
Sun Oct 18 17:55:17 2026 kern.info kernel: [ 3.026611] qca-ppe 3a000000.ppe lan1 (uninitialized): PHY [90000.mdio-1:02] driver [Qualcomm QCA8075] (irq=POLL)
Sun Oct 18 17:55:17 2026 kern.info kernel: [ 3.106608] qca-ppe 3a000000.ppe lan2 (uninitialized): PHY [90000.mdio-1:03] driver [Qualcomm QCA8075] (irq=POLL)
Sun Oct 18 17:55:17 2026 kern.info kernel: [ 3.176635] qca-ppe 3a000000.ppe lan3 (uninitialized): PHY [90000.mdio-1:04] driver [Qualcomm QCA8075] (irq=POLL)
Sun Oct 18 17:55:17 2026 kern.info kernel: [ 6.601386] qca-ppe 3a000000.ppe lan1: configuring for phy/psgmii link mode
Sun Oct 18 17:55:17 2026 kern.info kernel: [ 7.095086] qca-ppe 3a000000.ppe lan1: Link is Up - 1Gbps/Full - flow control off
Sun Oct 18 17:55:17 2026 kern.info kernel: [ 11.666094] qca-ppe 3a000000.ppe lan1: Link is Down
Sun Oct 18 17:55:24 2026 kern.info kernel: [ 24.581839] remoteproc remoteproc0: stopped remote processor q6wcss
Sun Oct 18 17:55:31 2026 kern.info kernel: [ 31.007013] qca-ppe 3a000000.ppe lan1: configuring for phy/psgmii link mode
Sun Oct 18 17:55:31 2026 kern.info kernel: [ 31.171684] qca-ppe 3a000000.ppe lan1: entered allmulticast mode
Sun Oct 18 17:55:31 2026 kern.info kernel: [ 31.183606] qca-ppe 3a000000.ppe lan1: entered promiscuous mode
Sun Oct 18 17:55:31 2026 kern.info kernel: [ 31.197547] qca-ppe 3a000000.ppe lan2: configuring for phy/psgmii link mode
Sun Oct 18 17:55:31 2026 kern.info kernel: [ 31.361223] qca-ppe 3a000000.ppe lan2: entered allmulticast mode
Sun Oct 18 17:55:31 2026 kern.info kernel: [ 31.366988] qca-ppe 3a000000.ppe lan2: entered promiscuous mode
Sun Oct 18 17:55:31 2026 kern.info kernel: [ 31.376329] qca-ppe 3a000000.ppe lan3: configuring for phy/psgmii link mode
Sun Oct 18 17:55:31 2026 kern.info kernel: [ 31.539330] qca-ppe 3a000000.ppe lan3: Link is Up - 100Mbps/Full - flow control off
Sun Oct 18 17:55:31 2026 kern.info kernel: [ 31.551106] qca-ppe 3a000000.ppe lan3: entered allmulticast mode
Sun Oct 18 17:55:31 2026 kern.info kernel: [ 31.556749] qca-ppe 3a000000.ppe lan3: entered promiscuous mode
Sun Oct 18 17:55:31 2026 kern.info kernel: [ 31.577402] qca-ppe 3a000000.ppe wan: configuring for phy/psgmii link mode
Sun Oct 18 17:55:34 2026 user.notice ppe-qos: marking rules: 156 filters installed, 0 refused
Sun Oct 18 17:55:34 2026 kern.info kernel: [ 34.322145] qca-ppe 3a000000.ppe lan1: Link is Up - 1Gbps/Full - flow control off
root@Xiaomi_AX3600 /root [#]#
logread -e nss
root@Xiaomi_AX3600 /root [#]# logread -e nss
Sun Oct 18 17:55:17 2026 kern.info kernel: [ 0.000000] OF: reserved mem: 0x000000004b000000..0x000000004e6fffff (56320 KiB) nomap non-reusable wcnss@4b000000
Sun Oct 18 17:55:25 2026 kern.info kernel: [ 25.178309] nss-wifi-drv: radio 0 rxdma id 128 base 0x4f1f0000 x4096 hw 0xc000000/0xc000000 swdesc 12288
Sun Oct 18 17:55:25 2026 kern.info kernel: [ 25.192776] nss-wifi-drv: radio 1 rxdma id 143 base 0x501a0000 x4096 hw 0xc000000/0xc000000 swdesc 12288
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.121729] nss-wifi-drv 39000000.nss: loaded qca-nss0-retail-11.4.bin, line 11.4, 835960 bytes at 0x0000000040000000
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.150839] nss-wifi-drv 39000000.nss: core 0 booted
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.162454] nss-wifi-drv 39000000.nss: payload pool set to 16384: 0
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.162708] nss-wifi-drv 39000000.nss: payload pool 8704 low 4352 high 16384: 0
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.177651] nss-wifi-drv 39000000.nss: packet descriptors: 757 pages of 4096 lent: 0
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.177858] nss-wifi-drv 39000000.nss: load reports off at 1689600000 Hz: 0 ack 1
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.185242] nss-wifi-drv 39000000.nss: wan: port 2 routes in the firmware, vsi 1
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.192613] nss-wifi-drv 39000000.nss: lan1: port 3 routes in the firmware, vsi 2
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.200058] nss-wifi-drv 39000000.nss: lan2: port 4 routes in the firmware, vsi 3
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.207428] nss-wifi-drv 39000000.nss: lan3: port 5 routes in the firmware, vsi 4
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.256272] nss-wifi-drv 39000000.nss: wifili: txdesc 0x0000000055700000+15000 ext 0x0000000055740000+29000, 2 pools, 3 tcl, 4 reo
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.256354] nss-wifi-drv 39000000.nss: wifili: tcl0 id 16 base 0x47a98000 x512 txcomp id 106 base 0x49800000 x32768 hw 0xca34910/0xca370c0 tclhw 0xca44510/0xca46000 tcle 8
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.266984] nss-wifi-drv 39000000.nss: wifili: tcl1 id 17 base 0x484b8000 x512 txcomp id 107 base 0x49a00000 x32768 hw 0xca34968/0xca370c8 tclhw 0xca44568/0xca46008 tcle 8
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.282506] nss-wifi-drv 39000000.nss: wifili: tcl2 id 18 base 0x48498000 x512 txcomp id 108 base 0x49c00000 x32768 hw 0xca349c0/0xca370d0 tclhw 0xca445c0/0xca46010 tcle 8
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.297972] nss-wifi-drv 39000000.nss: wifili: shadow rd 0x461ce000 wr 0x47bc7000 lmac from 128
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.313392] nss-wifi-drv 39000000.nss: wifili: reo0 id 0 base 0x4f200000 x2048 hw 0xca3829c/0xca3b038
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.321900] nss-wifi-drv 39000000.nss: wifili: reo1 id 1 base 0x4f240000 x2048 hw 0xca382f4/0xca3b040
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.331274] nss-wifi-drv 39000000.nss: wifili: reo2 id 2 base 0x4f280000 x2048 hw 0xca3834c/0xca3b048
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.340473] nss-wifi-drv 39000000.nss: wifili: reo3 id 3 base 0x4f2c0000 x2048 hw 0xca383a4/0xca3b050
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.349677] nss-wifi-drv 39000000.nss: wifili: radio 0 rxdma id 128 base 0x4f1f0000 x4096 hw 0xc000000/0xc000000 swdesc 12288
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.358881] nss-wifi-drv 39000000.nss: wifili: radio 1 rxdma id 143 base 0x501a0000 x4096 hw 0xc000000/0xc000000 swdesc 12288
Sun Oct 18 17:55:29 2026 user.notice nss-wifi: soc init: rc 0 response 0 error 0
Sun Oct 18 17:55:29 2026 user.notice nss-wifi: wifi pool: rc 0 (8192 payloads)
Sun Oct 18 17:55:29 2026 user.notice nss-wifi: radio 0 node: if_num 28
Sun Oct 18 17:55:29 2026 user.notice nss-wifi: radio 0 init: rc 0 response 0 error 0
Sun Oct 18 17:55:29 2026 user.notice nss-wifi: radio 0 v2stats: rc 0
Sun Oct 18 17:55:29 2026 user.notice nss-wifi: radio 0 bufs: rc 0 (8192 per range)
Sun Oct 18 17:55:29 2026 user.notice nss-wifi: radio 1 node: if_num 29
Sun Oct 18 17:55:29 2026 user.notice nss-wifi: radio 1 init: rc 0 response 0 error 0
Sun Oct 18 17:55:29 2026 user.notice nss-wifi: radio 1 v2stats: rc 0
Sun Oct 18 17:55:29 2026 user.notice nss-wifi: radio 1 bufs: rc 0 (8192 per range)
Sun Oct 18 17:55:29 2026 user.notice nss-wifi: start: rc 0 response 0 error 0
Sun Oct 18 17:55:29 2026 user.notice nss-wifi: next hop: rc 0
Sun Oct 18 17:55:29 2026 user.notice nss-wifi: stats: rc 0 response 0 error 0
Sun Oct 18 17:55:29 2026 kern.info kernel: [ 29.388660] nss-wifi-drv 39000000.nss: mesh forwarding: yes
Sun Oct 18 17:55:34 2026 kern.info kernel: [ 33.835835] nss-wifi-drv 39000000.nss: vdev 0 on radio 0 is interface 32, encap 2 decap 2
Sun Oct 18 17:55:34 2026 kern.info kernel: [ 33.846959] nss-wifi-drv 39000000.nss: peer 9c:9d:7e:76:2a:1c: id 1 ast_idx 743 ast_hash 0x2e7 vdev 0
Sun Oct 18 17:55:34 2026 kern.info kernel: [ 34.168488] nss-wifi-drv 39000000.nss: vdev 1 on radio 1 is interface 33, encap 2 decap 2
Sun Oct 18 17:55:34 2026 kern.info kernel: [ 34.171450] nss-wifi-drv 39000000.nss: peer 9c:9d:7e:76:2a:1b: id 3 ast_idx 311 ast_hash 0x137 vdev 1
Sun Oct 18 17:55:35 2026 kern.info kernel: [ 35.036154] qcom,gcc-ipq8074 1800000.clock-controller: sync_state() pending due to 1868010.nss-common
Sun Oct 18 18:52:42 2026 kern.info kernel: [ 84.331686] nss-wifi-drv 39000000.nss: peer 48:b4:23:b8:b3:d2: id 4 ast_idx 103 ast_hash 0x67 vdev 0
Sun Oct 18 18:52:42 2026 kern.info kernel: [ 84.426489] nss-wifi-drv 39000000.nss: interface 32 protects frames with 6
Sun Oct 18 18:53:47 2026 user.notice nss-wifi: bring-up survived, offload stays on for the next boot
root@Xiaomi_AX3600 /root [#]#
uci show firewall.@defaults[0]; uci show nss-wifi;
root@Xiaomi_AX3600 /root [#]# uci show firewall.@defaults[0]; uci show nss-wifi;
firewall.cfg01e63d=defaults
firewall.cfg01e63d.syn_flood='1'
firewall.cfg01e63d.input='REJECT'
firewall.cfg01e63d.output='ACCEPT'
firewall.cfg01e63d.forward='REJECT'
firewall.cfg01e63d.flow_offloading='1'
firewall.cfg01e63d.flow_offloading_hw='1'
nss-wifi.general=general
nss-wifi.general.offload='1'
nss-wifi.general.firmware='11.4'
root@Xiaomi_AX3600 /root [#]#
logred -e nss-wifi
root@Xiaomi_AX3600 /root [#]# logread -e nss-wifi
Sun Nov 1 19:16:29 2026 kern.info kernel: [ 26.759946] nss-wifi-drv: radio 0 rxdma id 128 base 0x4f510000 x4096 hw 0xc000000/0xc000000 swdesc 12288
Sun Nov 1 19:16:29 2026 kern.info kernel: [ 26.774372] nss-wifi-drv: radio 1 rxdma id 143 base 0x503c0000 x4096 hw 0xc000000/0xc000000 swdesc 12288
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.756243] nss-wifi-drv 39000000.nss: loaded qca-nss0-retail-11.4.bin, line 11.4, 835960 bytes at 0x0000000040000000
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.785173] nss-wifi-drv 39000000.nss: core 0 booted
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.796831] nss-wifi-drv 39000000.nss: payload pool set to 16384: 0
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.797086] nss-wifi-drv 39000000.nss: payload pool 8704 low 4352 high 16384: 0
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.812323] nss-wifi-drv 39000000.nss: packet descriptors: 757 pages of 4096 lent: 0
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.812526] nss-wifi-drv 39000000.nss: load reports off at 1689600000 Hz: 0 ack 1
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.819813] nss-wifi-drv 39000000.nss: wan: port 2 routes in the firmware
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.827096] nss-wifi-drv 39000000.nss: lan1: port 3 routes in the firmware
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.833921] nss-wifi-drv 39000000.nss: lan2: port 4 routes in the firmware
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.840670] nss-wifi-drv 39000000.nss: lan3: port 5 routes in the firmware
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.851254] nss-wifi-drv 39000000.nss: wifili: txdesc 0x0000000055240000 ext 0x00000000553c0000, 6+11 pages, 2 pools, 3 tcl, 4 reo
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.853809] nss-wifi-drv 39000000.nss: wifili: tcl0 id 16 base 0x44cf8000 x512 txcomp id 106 base 0x49c00000 x32768 hw 0xca34910/0xca370c0 tclhw 0xca44510/0xca46000 tcle 8
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.865579] nss-wifi-drv 39000000.nss: wifili: tcl1 id 17 base 0x44270000 x512 txcomp id 107 base 0x49e00000 x32768 hw 0xca34968/0xca370c8 tclhw 0xca44568/0xca46008 tcle 8
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.881078] nss-wifi-drv 39000000.nss: wifili: tcl2 id 18 base 0x44278000 x512 txcomp id 108 base 0x4ec00000 x32768 hw 0xca349c0/0xca370d0 tclhw 0xca445c0/0xca46010 tcle 8
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.896527] nss-wifi-drv 39000000.nss: wifili: shadow rd 0x47f3f000 wr 0x47f39000 lmac from 128
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.911963] nss-wifi-drv 39000000.nss: wifili: reo0 id 0 base 0x4f540000 x2048 hw 0xca3829c/0xca3b038
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.920471] nss-wifi-drv 39000000.nss: wifili: reo1 id 1 base 0x4f580000 x2048 hw 0xca382f4/0xca3b040
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.929843] nss-wifi-drv 39000000.nss: wifili: reo2 id 2 base 0x4f5c0000 x2048 hw 0xca3834c/0xca3b048
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.939037] nss-wifi-drv 39000000.nss: wifili: reo3 id 3 base 0x4f600000 x2048 hw 0xca383a4/0xca3b050
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.948253] nss-wifi-drv 39000000.nss: wifili: radio 0 rxdma id 128 base 0x4f510000 x4096 hw 0xc000000/0xc000000 swdesc 12288
Sun Nov 1 19:16:33 2026 kern.info kernel: [ 30.957455] nss-wifi-drv 39000000.nss: wifili: radio 1 rxdma id 143 base 0x503c0000 x4096 hw 0xc000000/0xc000000 swdesc 12288
Sun Nov 1 19:16:33 2026 user.notice nss-wifi: soc init: rc 0 response 0 error 0
Sun Nov 1 19:16:33 2026 user.notice nss-wifi: wifi pool: rc 0 (8192 payloads)
Sun Nov 1 19:16:33 2026 user.notice nss-wifi: radio 0 node: if_num 28
Sun Nov 1 19:16:33 2026 user.notice nss-wifi: radio 0 init: rc 0 response 0 error 0
Sun Nov 1 19:16:33 2026 user.notice nss-wifi: radio 0 v2stats: rc 0
Sun Nov 1 19:16:33 2026 user.notice nss-wifi: radio 0 bufs: rc 0 (8192 per range)
Sun Nov 1 19:16:33 2026 user.notice nss-wifi: radio 1 node: if_num 29
Sun Nov 1 19:16:33 2026 user.notice nss-wifi: radio 1 init: rc 0 response 0 error 0
Sun Nov 1 19:16:33 2026 user.notice nss-wifi: radio 1 v2stats: rc 0
Sun Nov 1 19:16:33 2026 user.notice nss-wifi: radio 1 bufs: rc 0 (8192 per range)
Sun Nov 1 19:16:33 2026 user.notice nss-wifi: start: rc 0 response 0 error 0
Sun Nov 1 19:16:33 2026 user.notice nss-wifi: next hop: rc 0
Sun Nov 1 19:16:33 2026 user.notice nss-wifi: stats: rc 0 response 0 error 0
Sun Nov 1 19:16:33 2026 user.notice nss-wifi: instance: 203 rc 0
Sun Nov 1 19:16:34 2026 kern.info kernel: [ 30.996324] nss-wifi-drv 39000000.nss: mesh forwarding: yes
Sun Nov 1 19:16:38 2026 kern.info kernel: [ 35.944573] nss-wifi-drv 39000000.nss: vdev 0 on radio 0 is interface 32, encap 2 decap 2
Sun Nov 1 19:16:38 2026 kern.info kernel: [ 35.959634] nss-wifi-drv 39000000.nss: peer 9c:9d:7e:76:2a:1c: id 1 ast_idx 743 ast_hash 0x2e7 vdev 0
Sun Nov 1 19:16:39 2026 kern.info kernel: [ 36.253103] nss-wifi-drv 39000000.nss: vdev 1 on radio 1 is interface 33, encap 2 decap 2
Sun Nov 1 19:16:39 2026 kern.info kernel: [ 36.260660] nss-wifi-drv 39000000.nss: peer 9c:9d:7e:76:2a:1b: id 3 ast_idx 311 ast_hash 0x137 vdev 1
Mon Nov 2 18:03:29 2026 kern.info kernel: [ 45.437520] nss-wifi-drv 39000000.nss: peer 48:b4:23:b8:b3:d2: id 4 ast_idx 103 ast_hash 0x67 vdev 0
Mon Nov 2 18:03:29 2026 kern.info kernel: [ 45.489805] nss-wifi-drv 39000000.nss: interface 32 protects frames with 6
Mon Nov 2 18:05:15 2026 user.notice nss-wifi: bring-up survived, offload stays on for the next boot
Mon Nov 2 18:11:36 2026 kern.info kernel: [ 531.767410] nss-wifi-drv 39000000.nss: peer 22:3a:b2:06:ab:0f: id 5 ast_idx 670 ast_hash 0x29e vdev 1
Mon Nov 2 18:11:36 2026 kern.info kernel: [ 531.870415] nss-wifi-drv 39000000.nss: interface 33 protects frames with 6
root@Xiaomi_AX3600 /root [#]#
logread -e ath10k
root@Xiaomi_AX3600 /root [#]# logread -e ath10k
Sun Nov 1 19:16:21 2026 kern.info kernel: [ 13.937146] ath10k 7.2 driver, optimized for CT firmware, probing pci device: 0x50.
Sun Nov 1 19:16:21 2026 kern.info kernel: [ 13.937735] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
Sun Nov 1 19:16:21 2026 kern.info kernel: [ 13.944176] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Sun Nov 1 19:16:21 2026 kern.info kernel: [ 14.872269] ath10k_pci 0000:01:00.0: qca9887 hw1.0 target 0x4100016d chip_id 0x004000ff sub 0000:0000
Sun Nov 1 19:16:21 2026 kern.info kernel: [ 14.872341] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Sun Nov 1 19:16:21 2026 kern.info kernel: [ 14.880818] ath10k_pci 0000:01:00.0: firmware ver 10.1-ct-87-__fW-022-d8dab8e8 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,peer-fixed-rate,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 81827605
Sun Nov 1 19:16:21 2026 kern.info kernel: [ 14.917753] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 b4ce36fa
Sun Nov 1 19:16:21 2026 kern.warn kernel: [ 15.786153] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
Sun Nov 1 19:16:21 2026 kern.info kernel: [ 15.792666] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
Sun Nov 1 19:16:21 2026 kern.info kernel: [ 15.792724] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
Sun Nov 1 19:16:21 2026 kern.info kernel: [ 15.798921] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 24400 iram: 24364'
Sun Nov 1 19:16:21 2026 kern.info kernel: [ 15.830747] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal nvmem max-sta 128 raw 0 hwcrypto 1
Sun Nov 1 19:16:21 2026 kern.info kernel: [ 15.843017] ath10k_pci 0000:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
Sun Nov 1 19:16:37 2026 kern.warn kernel: [ 34.974077] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
Sun Nov 1 19:16:37 2026 kern.info kernel: [ 34.980640] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
Sun Nov 1 19:16:37 2026 kern.info kernel: [ 34.980702] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
Sun Nov 1 19:16:37 2026 kern.info kernel: [ 34.986950] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 24400 iram: 24364'
Sun Nov 1 19:16:38 2026 kern.warn kernel: [ 35.031579] ath10k_pci 0000:01:00.0: pdev param 0 not supported by firmware
Sun Nov 1 19:16:38 2026 kern.info kernel: [ 35.036422] ath10k_pci 0000:01:00.0: rts threshold -1
Sun Nov 1 19:16:38 2026 kern.info kernel: [ 35.038330] ath10k_pci 0000:01:00.0 phy0-ap0: routed by NSS core 0, nodes 30/31
Sun Nov 1 19:16:38 2026 kern.info kernel: [ 35.056084] ath10k_pci 0000:01:00.0 phy0-ap0: entered allmulticast mode
Sun Nov 1 19:16:38 2026 kern.info kernel: [ 35.062076] ath10k_pci 0000:01:00.0 phy0-ap0: entered promiscuous mode
root@Xiaomi_AX3600 /root [#]#
Screenshots
https://github.com/Payti/Qualcommax_PPE … creen1.png
https://github.com/Payti/Qualcommax_PPE … creen2.png
https://github.com/Payti/Qualcommax_PPE … creen3.png
https://github.com/Payti/Qualcommax_PPE … creen4.png
https://github.com/Payti/Qualcommax_PPE … creen5.png
https://github.com/Payti/Qualcommax_PPE … creen6.png
https://github.com/Payti/Qualcommax_PPE … creen7.png
https://github.com/Payti/Qualcommax_PPE … creen8.png
https://github.com/Payti/Qualcommax_PPE … creen9.png
Mój build:
- bazuje na 'openwrt-ppe-nss' i gałęzi 'ppe-nss' @JuliusBairaktaris z kernel 6.18.xx
--> https://github.com/JuliusBairaktaris/op … ee/ppe-nss
- LuCI PL, EN
- dodany zbiór fajnych pakietów od @Cezarego (z jego repo) + te które są w kompilacji z jego ASU (domyślnie) w Xiaomi AX3600
- dodanych kilka moich użytecznych pakietów jak: usteer, mc, htop, nano, iperf3, lm-sensors, bmon, LuCI statystyki (vnstat2, statistics), LuCI terminal (ttyd) i inne
- buily zawierają pełny wpad-mbedtls
- buily zawierają konfigi dla silnika PPE + NSS WiFi offload -> Packet Processing Engine hardware offload, WiFi ath11k jest offload'owane poprzez NSS, buildy zawierają oba firmware NSS 11.4 + 12.5, włączenie dla MESH FW 11.4 - wg info j/w
- dodane pluginy dla obsługi QoS jak: PPE QoS, SQM QoS, BCP38 + dodałem w buildach tłumaczenie dla LuCI PL dla nich
- dodane sterowniki WiFi: ath11k (z poprawkami Juliusa) i ath10k (IoT) (działają bardzo dobrze u mnie)
- dodane: nlbwmon (tutaj działa) i usunięte: attendedsysupgrade (brak serwera ASU dla buildów z PPE) - jeśli ktoś go potrzebuje można doinstalować 'ręcznie' z pakietów
Aktualne buildy PPE-NSS z autoaktualizacją Github Actions dla Xiaomi AX3600 do pobrania:
-->> https://github.com/Payti/Qualcommax_PPE … s/releases
Banana Pi BPI-R3 + SFP GPON ONT Nokia G-010S-A + LTE FIBOCOM L860-GL-16 (OpenWrt 25.12-SNAPSHOT, kernel 6.12.71)
Zyxel T56 EX5601-T1 (OpenWrt 25.12-SNAPSHOT, kernel 6.12.103)
Xiaomi AX3600 (OpenWrt PPE-NSS SNAPSHOT, kernel 6.18.55)
OpenWRT NSS, EDMA-NSS and PPE-NSS builds for Xiaomi AX3600 (IPQ8071A) by @Payti