Mam ten build teraz na routerze i działa prawidłowo.
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014]
[ 0.000000] Linux version 6.12.94 (secam@VivoBook) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 14.3.0 r1-ab08f6a524) 14.3.0, GNU ld (GNU Binutils) 2.44) #0 SMP Wed Jul 8 19:08:32 2026
[ 0.000000] Machine model: TP-Link Archer AX55 v1
[ 0.000000] OF: reserved mem: 0x000000004a400000..0x000000004a7fffff (4096 KiB) nomap non-reusable tz_apps@4a400000
[ 0.000000] OF: reserved mem: 0x000000004a800000..0x000000004a9fffff (2048 KiB) nomap non-reusable bootloader@4a800000
[ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable sbl@4aa00000
[ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004abfffff (1024 KiB) nomap non-reusable smem@4ab00000
[ 0.000000] OF: reserved mem: 0x000000004ac00000..0x000000004adfffff (2048 KiB) nomap non-reusable tz@4ac00000
[ 0.000000] OF: reserved mem: 0x000000004b000000..0x000000004dffffff (49152 KiB) nomap non-reusable wcss@4b000000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000004a3fffff]
[ 0.000000] node 0: [mem 0x000000004a400000-0x000000004adfffff]
[ 0.000000] node 0: [mem 0x000000004ae00000-0x000000004affffff]
[ 0.000000] node 0: [mem 0x000000004b000000-0x000000004dffffff]
[ 0.000000] node 0: [mem 0x000000004e000000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] psci: OSI mode supported.
[ 0.000000] psci: [Firmware Bug]: failed to set PC mode: -1
[ 0.000000] percpu: Embedded 20 pages/cpu s43224 r8192 d30504 u81920
[ 0.000000] pcpu-alloc: s43224 r8192 d30504 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: ubi.mtd=rootfs_1 root=mtd:ubi_rootfs rootfstype=squashfs rootwait root=/dev/ubiblock0_1 coherent_pool=2M
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
[ 0.000000] software IO TLB: area num 2.
[ 0.000000] software IO TLB: mapped [mem 0x000000005f580000-0x000000005f600000] (0MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00aff7], SPI[448:479]
[ 0.000000] GICv2m: range[mem 0x0b00b000-0x0b00bff7], SPI[480:511]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000128] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000146] pid_max: default: 32768 minimum: 301
[ 0.005102] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.005125] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.011316] rcu: Hierarchical SRCU implementation.
[ 0.011330] rcu: Max phase no-delay instances is 1000.
[ 0.011851] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.012444] smp: Bringing up secondary CPUs ...
[ 0.013485] Detected VIPT I-cache on CPU1
[ 0.013632] CPU1: Booted secondary processor 0x0000000001 [0x51af8014]
[ 0.013837] smp: Brought up 1 node, 2 CPUs
[ 0.013858] SMP: Total of 2 processors activated.
[ 0.013864] CPU: All CPU(s) started at EL1
[ 0.013870] CPU features: detected: 32-bit EL0 Support
[ 0.013877] CPU features: detected: CRC32 instructions
[ 0.013948] alternatives: applying system-wide alternatives
[ 0.014184] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.014475] Memory: 438184K/524288K available (8896K kernel code, 904K rwdata, 2832K rodata, 960K init, 287K bss, 84252K reserved, 0K cma-reserved)
[ 0.021671] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.021708] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.021860] 29248 pages in range for non-PLT usage
[ 0.021871] 520768 pages in range for PLT usage
[ 0.024033] pinctrl core: initialized pinctrl subsystem
[ 0.026736] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.027778] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.028108] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.028450] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.029077] thermal_sys: Registered thermal governor 'step_wise'
[ 0.029255] cpuidle: using governor menu
[ 0.029555] ASID allocator initialised with 65536 entries
[ 0.034747] /soc@0/interrupt-controller@b000000: Fixed dependency cycle(s) with /soc@0/interrupt-controller@b000000
[ 0.074367] SCSI subsystem initialized
[ 0.074828] usbcore: registered new interface driver usbfs
[ 0.074960] usbcore: registered new interface driver hub
[ 0.075055] usbcore: registered new device driver usb
[ 0.075556] qcom_scm: convention: smc arm 64
[ 0.078244] clocksource: Switched to clocksource arch_sys_counter
[ 0.082472] NET: Registered PF_INET protocol family
[ 0.082709] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.084933] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.084970] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.084994] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.085051] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.085230] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.085678] MPTCP token hash table entries: 512 (order: 2, 12288 bytes, linear)
[ 0.085917] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.085951] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.086557] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.086621] PCI: CLS 0 bytes, default 64
[ 0.089709] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[ 0.090362] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.090375] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.096497] qcom-m31usb-phy 5b000.phy: supply vdd not found, using dummy regulator
[ 0.213199] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.215185] msm_serial 78af000.serial: msm_serial: detected port #0
[ 0.215358] msm_serial 78af000.serial: uartclk = 1843199
[ 0.216113] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 21, base_baud = 115199) is a MSM
[ 0.216268] msm_serial: console setup on port #0
[ 0.216359] printk: legacy console [ttyMSM0] enabled
[ 0.948881] msm_serial: driver initialized
[ 0.963071] loop: module loaded
[ 0.967587] spi-nand spi0.0: ESMT SPI NAND was found.
[ 0.967641] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
[ 0.972453] 16 fixed-partitions partitions found on MTD device spi0.0
[ 0.979877] Creating 16 MTD partitions on "spi0.0":
[ 0.986133] 0x000000000000-0x000000080000 : "0:SBL1"
[ 0.992990] 0x000000080000-0x000000100000 : "0:MIBIB"
[ 0.998063] 0x000000100000-0x000000140000 : "0:BOOTCONFIG"
[ 1.002664] 0x000000140000-0x000000180000 : "0:BOOTCONFIG1"
[ 1.007937] 0x000000180000-0x000000280000 : "0:QSEE"
[ 1.014964] 0x000000280000-0x0000002c0000 : "0:DEVCFG"
[ 1.018701] 0x0000002c0000-0x000000300000 : "0:CDT"
[ 1.023886] 0x000000300000-0x000000380000 : "0:APPSBLENV"
[ 1.028883] 0x000000380000-0x0000004c0000 : "0:APPSBL"
[ 1.035878] 0x0000004c0000-0x0000005c0000 : "0:ART"
[ 1.040532] 0x0000005c0000-0x000000640000 : "0:TRAINING"
[ 1.044226] 0x000000640000-0x000003040000 : "rootfs"
[ 1.128786] mtd: setting mtd11 (rootfs) as root device
[ 1.129529] mtdsplit: no squashfs found in "rootfs"
[ 1.132879] 0x000003040000-0x000005a40000 : "rootfs_1"
[ 1.217787] 0x000005a40000-0x000006280000 : "tp_data"
[ 1.234539] 0x000006280000-0x0000066c0000 : "radio"
[ 1.243857] 0x0000066c0000-0x000006740000 : "data"
[ 1.395174] ipq5018-gmac-dwmac 39d00000.ethernet: IRQ eth_wake_irq not found
[ 1.395245] ipq5018-gmac-dwmac 39d00000.ethernet: IRQ sfty not found
[ 1.402142] ipq5018-gmac-dwmac 39d00000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 1.407662] ipq5018-gmac-dwmac 39d00000.ethernet: DWMAC1000
[ 1.415103] ipq5018-gmac-dwmac 39d00000.ethernet: DMA HW capability register supported
[ 1.420912] ipq5018-gmac-dwmac 39d00000.ethernet: RX Checksum Offload Engine supported
[ 1.428634] ipq5018-gmac-dwmac 39d00000.ethernet: COE Type 2
[ 1.436468] ipq5018-gmac-dwmac 39d00000.ethernet: TX Checksum insertion supported
[ 1.442327] ipq5018-gmac-dwmac 39d00000.ethernet: Wake-Up On Lan supported
[ 1.449688] ipq5018-gmac-dwmac 39d00000.ethernet: Enhanced/Alternate descriptors
[ 1.456434] ipq5018-gmac-dwmac 39d00000.ethernet: Enabled extended descriptors
[ 1.464012] ipq5018-gmac-dwmac 39d00000.ethernet: Ring mode enabled
[ 1.471032] ipq5018-gmac-dwmac 39d00000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 1.477209] ipq5018-gmac-dwmac 39d00000.ethernet: device MAC address 22:c7:e8:99:f9:c7
[ 1.488352] i2c_dev: i2c /dev entries driver
[ 1.499038] sdhci: Secure Digital Host Controller Interface driver
[ 1.499101] sdhci: Copyright(c) Pierre Ossman
[ 1.504135] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.512754] remoteproc remoteproc0: releasing cd00000.remoteproc
[ 1.518111] NET: Registered PF_INET6 protocol family
[ 1.522776] Segment Routing with IPv6
[ 1.525293] In-situ OAM (IOAM) with IPv6
[ 1.529036] NET: Registered PF_PACKET protocol family
[ 1.533272] 8021q: 802.1Q VLAN Support v1.8
[ 1.593349] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 799999 KHz, changing to: 1296000 KHz
[ 1.596226] remoteproc remoteproc0: cd00000.remoteproc is available
[ 1.603174] qcom-q6-mpd cd00000.remoteproc: pd-1 node found
[ 1.610482] remoteproc remoteproc1: pd-1 is available
[ 1.614793] qcom-q6-mpd cd00000.remoteproc: pd-2 node found
[ 1.621266] remoteproc remoteproc2: pd-2 is available
[ 1.625368] qcom-q6-mpd cd00000.remoteproc: pd-3 node found
[ 1.631897] remoteproc remoteproc3: pd-3 is available
[ 1.637558] ubi0: attaching mtd12
[ 2.000480] ubi0: scanning is finished
[ 2.049452] ubi0: attached mtd12 (name "rootfs_1", size 42 MiB)
[ 2.049508] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.054199] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.061207] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.068002] ubi0: good PEBs: 336, bad PEBs: 0, corrupted PEBs: 0
[ 2.074795] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[ 2.081040] ubi0: max/mean erase counter: 33/26, WL threshold: 4096, image sequence number: 2137538170
[ 2.088057] ubi0: available PEBs: 0, total reserved PEBs: 336, PEBs reserved for bad PEB handling: 20
[ 2.097407] ubi0: background thread "ubi_bgt0d" started, PID 577
[ 2.108475] block ubiblock0_1: created from ubi0:1(rootfs)
[ 2.112916] clk: Disabling unused clocks
[ 2.130611] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.131109] Freeing unused kernel memory: 960K
[ 2.136799] Run /sbin/init as init process
[ 2.141148] with arguments:
[ 2.141155] /sbin/init
[ 2.141160] with environment:
[ 2.141164] HOME=/
[ 2.141168] TERM=linux
[ 2.519265] init: Console is alive
[ 2.519617] init: - watchdog -
[ 3.152125] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.254017] gpio_button_hotplug: loading out-of-tree module taints kernel.
[ 3.260804] rtl8365mb-mdio 90000.mdio-1:1d: found an RTL8367S switch
[ 3.443325] rtl8365mb-mdio 90000.mdio-1:1d: missing child interrupt-controller node
[ 3.443374] rtl8365mb-mdio 90000.mdio-1:1d: no interrupt support
[ 3.742999] rtl8365mb-mdio 90000.mdio-1:1d: configuring for fixed/2500base-x link mode
[ 3.753055] rtl8365mb-mdio 90000.mdio-1:1d: Link is Up - 2.5Gbps/Full - flow control off
[ 3.755801] rtl8365mb-mdio 90000.mdio-1:1d wan (uninitialized): PHY [90000.mdio-1:1d:user_mii:00] driver [RTL8365MB-VC Gigabit Ethernet] (irq=POLL)
[ 3.764304] rtl8365mb-mdio 90000.mdio-1:1d lan1 (uninitialized): PHY [90000.mdio-1:1d:user_mii:01] driver [RTL8365MB-VC Gigabit Ethernet] (irq=POLL)
[ 3.776881] rtl8365mb-mdio 90000.mdio-1:1d lan2 (uninitialized): PHY [90000.mdio-1:1d:user_mii:02] driver [RTL8365MB-VC Gigabit Ethernet] (irq=POLL)
[ 3.790455] rtl8365mb-mdio 90000.mdio-1:1d lan3 (uninitialized): PHY [90000.mdio-1:1d:user_mii:03] driver [RTL8365MB-VC Gigabit Ethernet] (irq=POLL)
[ 3.803642] rtl8365mb-mdio 90000.mdio-1:1d lan4 (uninitialized): PHY [90000.mdio-1:1d:user_mii:04] driver [RTL8365MB-VC Gigabit Ethernet] (irq=POLL)
[ 3.816130] DSA: tree 0 setup
[ 3.848996] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 3.849067] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 3.853550] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000808000000010
[ 3.861138] xhci-hcd xhci-hcd.1.auto: irq 46, io mem 0x08a00000
[ 3.870575] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 3.876236] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 3.881819] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 3.890257] hub 1-0:1.0: USB hub found
[ 3.895992] hub 1-0:1.0: 1 port detected
[ 3.900565] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.904508] hub 2-0:1.0: USB hub found
[ 3.912008] hub 2-0:1.0: 1 port detected
[ 3.922819] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.927603] init: - preinit -
[ 4.298321] random: crng init done
[ 4.517445] ubi1: attaching mtd13
[ 4.517485] ubi1: MTD device 13 is write-protected, attach in read-only mode
[ 4.589597] ubi1: scanning is finished
[ 4.601481] ubi1 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 10, need 20
[ 4.639132] ubi1: attached mtd13 (name "tp_data", size 8 MiB)
[ 4.639184] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.643875] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.650697] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.657505] ubi1: good PEBs: 66, bad PEBs: 0, corrupted PEBs: 0
[ 4.664287] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 4.670190] ubi1: max/mean erase counter: 18/9, WL threshold: 4096, image sequence number: 704785349
[ 4.677472] ubi1: available PEBs: 0, total reserved PEBs: 66, PEBs reserved for bad PEB handling: 10
[ 4.686804] ubi1: background thread "ubi_bgt1d" started, PID 766
[ 4.703212] UBIFS (ubi1:0): read-only UBI device
[ 4.704656] UBIFS (ubi1:0): Mounting in unauthenticated mode
[ 4.890439] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "tp_data", R/O mode
[ 4.890484] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 4.897606] UBIFS (ubi1:0): FS size: 5332992 bytes (5 MiB, 42 LEBs), max 66 LEBs, journal size 1396736 bytes (1 MiB, 11 LEBs)
[ 4.907726] UBIFS (ubi1:0): reserved for root: 0 bytes (0 KiB)
[ 4.918971] UBIFS (ubi1:0): media format: w4/r0 (latest is w5/r0), UUID 8088E745-F927-4434-A267-7202A7D99B2C, small LPT model
[ 5.554079] ipq5018-gmac-dwmac 39d00000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 5.558347] ipq5018-gmac-dwmac 39d00000.ethernet eth0: No Safety Features support found
[ 5.561269] ipq5018-gmac-dwmac 39d00000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 5.571401] ipq5018-gmac-dwmac 39d00000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 5.905267] rtl8365mb-mdio 90000.mdio-1:1d lan1: configuring for phy/gmii link mode
[ 5.906553] ipq5018-gmac-dwmac 39d00000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control off
[ 6.820774] rtl8365mb-mdio 90000.mdio-1:1d: port 6 SerDes healthy after 1 reset pulse(s)
[ 10.210971] UBIFS (ubi0:2): Mounting in unauthenticated mode
[ 10.211203] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 870
[ 10.379889] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[ 10.379937] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 10.386711] UBIFS (ubi0:2): FS size: 25649152 bytes (24 MiB, 202 LEBs), max 212 LEBs, journal size 1269760 bytes (1 MiB, 10 LEBs)
[ 10.396659] UBIFS (ubi0:2): reserved for root: 1211472 bytes (1183 KiB)
[ 10.408286] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 7205F052-0AAD-422E-B644-02B703AFE56F, small LPT model
[ 10.417825] mount_root: overlay filesystem has not been fully initialized yet
[ 10.428341] mount_root: switching to ubifs overlay
[ 10.439454] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 10.739918] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 10.943286] procd: - early -
[ 10.943510] procd: - watchdog -
[ 11.577747] procd: - watchdog -
[ 11.578150] procd: - ubus -
[ 11.671632] procd: - init -
[ 12.389459] urngd: v1.0.2 started.
[ 12.518372] kmodloader: loading kernel modules from /etc/modules.d/*
[ 12.812440] Loading modules backported from Linux version v6.18.26-0-g1fe060681
[ 12.812498] Backport generated by backports.git 6ecbb44
[ 12.835475] NET: Registered PF_QIPCRTR protocol family
[ 13.047859] PPP generic driver version 2.4.2
[ 13.050213] NET: Registered PF_PPPOX protocol family
[ 13.107619] ath11k c000000.wifi: Multipd architecture - userpd: 1
[ 13.108164] ath11k c000000.wifi: ipq5018 hw1.0
[ 13.112749] ath11k c000000.wifi: FW memory mode: 1
[ 13.165172] remoteproc remoteproc1: powering up pd-1
[ 13.165677] remoteproc remoteproc1: Booting fw image ath11k/IPQ5018/hw1.0/q6_fw.mdt, size 1820
[ 13.169304] remoteproc remoteproc0: powering up cd00000.remoteproc
[ 13.177638] remoteproc remoteproc0: Booting fw image ath11k/IPQ5018/hw1.0/q6_fw.mdt, size 1820
[ 15.155936] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up
[ 15.174461] remoteproc remoteproc1: remote processor pd-1 is now up
[ 15.177117] ath11k b00a040.wifi: Multipd architecture - userpd: 3
[ 15.180073] ath11k b00a040.wifi: qcn6122 hw1.0
[ 15.185797] ath11k b00a040.wifi: FW memory mode: 1
[ 15.200857] ath11k c000000.wifi: qmi fail to get qcom,m3-dump-addr, ignore m3 dump mem req
[ 15.208435] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff
[ 15.208507] ath11k c000000.wifi: fw_version 0x270206d0 fw_build_timestamp 2022-08-04 13:28 fw_build_id WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
[ 15.245136] remoteproc remoteproc3: powering up pd-3
[ 15.245614] remoteproc remoteproc3: Booting fw image ath11k/IPQ5018/hw1.0/q6_fw.mdt, size 1820
[ 15.260004] remoteproc remoteproc3: remote processor pd-3 is now up
[ 15.273608] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 15.356443] ath11k b00a040.wifi: qmi ignore invalid mem req type 10
[ 15.363909] ath11k b00a040.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff
[ 15.363970] ath11k b00a040.wifi: fw_version 0x270206d0 fw_build_timestamp 2022-08-04 13:28 fw_build_id WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
[ 20.758916] ipq5018-gmac-dwmac 39d00000.ethernet eth0: Link is Down
[ 20.777480] ipq5018-gmac-dwmac 39d00000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 20.778688] ipq5018-gmac-dwmac 39d00000.ethernet eth0: No Safety Features support found
[ 20.784671] ipq5018-gmac-dwmac 39d00000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 20.792536] ipq5018-gmac-dwmac 39d00000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 20.803838] ipq5018-gmac-dwmac 39d00000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control off
[ 20.835702] rtl8365mb-mdio 90000.mdio-1:1d lan1: configuring for phy/gmii link mode
[ 20.880273] br-lan: port 1(lan1) entered blocking state
[ 20.880346] br-lan: port 1(lan1) entered disabled state
[ 20.884388] rtl8365mb-mdio 90000.mdio-1:1d lan1: entered allmulticast mode
[ 20.889719] ipq5018-gmac-dwmac 39d00000.ethernet eth0: entered allmulticast mode
[ 20.896874] rtl8365mb-mdio 90000.mdio-1:1d lan1: entered promiscuous mode
[ 20.904157] ipq5018-gmac-dwmac 39d00000.ethernet eth0: entered promiscuous mode
[ 20.947117] rtl8365mb-mdio 90000.mdio-1:1d lan2: configuring for phy/gmii link mode
[ 20.959488] br-lan: port 2(lan2) entered blocking state
[ 20.959536] br-lan: port 2(lan2) entered disabled state
[ 20.963576] rtl8365mb-mdio 90000.mdio-1:1d lan2: entered allmulticast mode
[ 20.969230] rtl8365mb-mdio 90000.mdio-1:1d lan2: entered promiscuous mode
[ 21.007521] rtl8365mb-mdio 90000.mdio-1:1d lan3: configuring for phy/gmii link mode
[ 21.020067] br-lan: port 3(lan3) entered blocking state
[ 21.020115] br-lan: port 3(lan3) entered disabled state
[ 21.024157] rtl8365mb-mdio 90000.mdio-1:1d lan3: entered allmulticast mode
[ 21.029836] rtl8365mb-mdio 90000.mdio-1:1d lan3: entered promiscuous mode
[ 21.055429] rtl8365mb-mdio 90000.mdio-1:1d lan4: configuring for phy/gmii link mode
[ 21.087903] br-lan: port 4(lan4) entered blocking state
[ 21.087953] br-lan: port 4(lan4) entered disabled state
[ 21.092138] rtl8365mb-mdio 90000.mdio-1:1d lan4: entered allmulticast mode
[ 21.097533] rtl8365mb-mdio 90000.mdio-1:1d lan4: entered promiscuous mode
[ 21.187812] rtl8365mb-mdio 90000.mdio-1:1d wan: configuring for phy/gmii link mode
[ 22.122130] br-lan: port 5(phy0-ap0) entered blocking state
[ 22.122199] br-lan: port 5(phy0-ap0) entered disabled state
[ 22.126586] ath11k c000000.wifi phy0-ap0: entered allmulticast mode
[ 22.132507] ath11k c000000.wifi phy0-ap0: entered promiscuous mode
[ 23.151758] br-lan: port 6(phy1-ap0) entered blocking state
[ 23.151827] br-lan: port 6(phy1-ap0) entered disabled state
[ 23.156239] ath11k b00a040.wifi phy1-ap0: entered allmulticast mode
[ 23.162270] ath11k b00a040.wifi phy1-ap0: entered promiscuous mode
[ 23.921590] br-lan: port 6(phy1-ap0) entered blocking state
[ 23.921671] br-lan: port 6(phy1-ap0) entered forwarding state
[ 24.348012] rtl8365mb-mdio 90000.mdio-1:1d wan: Link is Up - 1Gbps/Full - flow control rx/tx
[ 24.688462] br-lan: port 5(phy0-ap0) entered blocking state
[ 24.688520] br-lan: port 5(phy0-ap0) entered forwarding state
