Watchdog handover: fd=3
- watchdog -
Watchdog did not previously reset the system
Sat Feb 28 14:42:42 CET 2026 upgrade: Sending TERM to remaining processes ...
Sat Feb 28 14:42:42 CET 2026 upgrade: Sending signal TERM to tailscaled (3459)
Sat Feb 28 14:42:42 CET 2026 upgrade: Sending signal TERM to sle ep (5341)
Sat Feb 28 14:42:46 CET 2026 upgrade: Sending KILL to remaining processes ...
[ 142.150715] stage2 (5426): drop_caches: 3
Sat Feb 28 14:42:52 CET 2026 upgrade: Switching to ramdisk...
[ 144.292801] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 144.303265] UBIFS (ubi0:1): un-mount UBI device 0
Sat Feb 28 13:42:54 UTC 2026 upgrade: Performing system upgrade...
verifying sysupgrade tar file integrity
tar: write error: No space left on device
cat: write error: Broken pipe
corrupted sysupgrade tar file
sysupgrade failed
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource busy
[ 144.819435] remoteproc remoteproc0: stopped remote processor cd00000.q6v5_wcs s
[ 145.454
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1-00147
S - IMAGE_VARIANT_STRING=HAACANAAA
S - OEM_IMAGE_VERSION_STRING=xiaoyang-gv
S - Boot Config, 0x000002e5
B - 202 - PBL, Start
B - 2740 - bootable_media_detect_entry, Start
B - 3448 - bootable_media_detect_success, Start
B - 3452 - elf_loader_entry, Start
B - 6121 - auth_hash_seg_entry, Start
B - 6368 - auth_hash_seg_exit, Start
B - 68635 - elf_segs_hash_verify_entry, Start
B - 131335 - PBL, End
B - 221613 - SBL1, Start
B - 303353 - GCC [RstStat:0x10, RstDbg:0x600000] WDog Stat : 0x4
B - 313418 - pm_device_init, Start
B - 499590 - PM_SET_VAL:Skip
D - 184037 - pm_device_init, Delta
B - 501908 - pm_driver_init, Start
D - 5368 - pm_driver_init, Delta
B - 508343 - clock_init, Start
D - 2165 - clock_init, Delta
B - 512339 - boot_flash_init, Start
D - 11864 - boot_flash_init, Delta
B - 527985 - boot_config_data_table_init, Start
D - 3202 - boot_config_data_table_init, Delta - (575 Bytes)
B - 535488 - Boot Setting : 0x00000600
B - 539423 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:16
B - 546377 - sbl1_ddr_set_params, Start
B - 550189 - CPR configuration: 0x300
B - 553666 - cpr_init, Start
B - 556442 - Rail:0 Mode: 5 Voltage: 816000
B - 561596 - CL CPR settled at 768000mV
B - 564433 - Rail:1 Mode: 5 Voltage: 880000
B - 568611 - Rail:1 Mode: 7 Voltage: 912000
D - 16470 - cpr_init, Delta
B - 575504 - Pre_DDR_clock_init, Start
B - 579530 - Pre_DDR_clock_init, End
B - 582916 - DDR Type : PCDDR3
B - 588528 - do ddr sanity test, Start
D - 1037 - do ddr sanity test, Delta
B - 593377 - DDR: Start of HAL DDR Boot Training
B - 598105 - DDR: End of HAL DDR Boot Training
B - 603778 - DDR: Checksum to be stored on flash is 1657464573
B - 614209 - Image Load, Start
D - 224084 - QSEE Image Loaded, Delta - (1373936 Bytes)
B - 838353 - Image Load, Start
D - 61 - SEC Image Loaded, Delta - (0 Bytes)
B - 846009 - Image Load, Start
D - 10736 - DEVCFG Image Loaded, Delta - (26004 Bytes)
B - 856836 - Image Load, Start
D - 25254 - RPM Image Loaded, Delta - (105964 Bytes)
B - 882151 - Image Load, Start
D - 96533 - APPSBL Image Loaded, Delta - (589900 Bytes)
B - 978806 - QSEE Execution, Start
D - 61 - QSEE Execution, Delta
B - 984631 - USB D+ check, Start
D - 0 - USB D+ check, Delta
B - 991006 - SBL1, End
D - 771711 - SBL1, Delta
S - Flash Throughput, 6752 KB/s (2096379 Bytes, 310451 us)
S - DDR Frequency, 466 MHz
S - Core 0 Frequency, 800 MHz
U-Boot 2016.01 (Sep 28 2020 - 09:05:55 +0000), Build: jenkins-common_router_open wrt_ota_publish-383
DRAM: smem ram ptable found: ver: 1 len: 4
512 MiB
NAND: ONFI device found
ID = 1590aac8
Vendor = c8
Device = aa
qpic_nand: changing oobsize to 64 from 128 bytes
SF: Unsupported flash IDs: manuf ff, jedec ffff, ext_jedec ffff
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
256 MiB
MMC: sdhci: Node Not found, skipping initialization
## Error: flags type check failure for "ethaddr" <= ""00:AA:BB:CC:DD:10"" (type: m)
himport_r: can't insert "ethaddr="00:AA:BB:CC:DD:10"" into hash table
PCI Link Intialized
PCI1 is not defined in the device tree
In: serial@78B3000
Out: serial@78B3000
Err: serial@78B3000
machid: 8010010
MMC Device 0 not found
eth5 MAC Address from ART is not valid
write phy_id=1, reg(0x8074):0x0670
write phy_id=2, reg(0x8074):0x0670
write phy_id=3, reg(0x8074):0x0670
write phy_id=4, reg(0x8074):0x0670
bootwait is on, bootdelay=5
Hit any key to stop autoboot: 0
trigger button release!
boot from rootfs 0
miwifi: check crash in rmem !
ubi0: attaching mtd1
ubi0: scanning is finished
ubi0: attached mtd1 (name "mtd=0", size 35 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 286, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 7/4, WL threshold: 4096, image sequence number: 52 6461313
ubi0: available PEBs: 199, total reserved PEBs: 87, PEBs reserved for bad PEB ha ndling: 40
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (5459968)
Could not find PCI in device tree
## Loading kernel from FIT Image at 44000000 ...
Using 'config@ac04' configuration
Trying 'kernel-1' kernel subimage
Description: ARM64 OpenWrt Linux-6.12.71
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x440000e8
Data Size: 5348859 Bytes = 5.1 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x41000000
Entry Point: 0x41000000
Hash algo: crc32
Hash value: b2cae3ff
Hash algo: sha1
Hash value: 5cdeae5bc94971fbbaaee247b9aae2902469ab44
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 44000000 ...
Using 'config@ac04' configuration
Trying 'fdt-1' fdt subimage
Description: ARM64 OpenWrt xiaomi_ax3600 device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x4451a024
Data Size: 45148 Bytes = 44.1 KiB
Architecture: AArch64
Hash algo: crc32
Hash value: 318910bb
Hash algo: sha1
Hash value: 67ebc9ebc3626875394966b7a78abc87a3e95c5f
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x4451a024
Uncompressing Kernel Image ... OK
Loading Device Tree to 4a3f1000, end 4a3ff05b ... OK
Using machid 0x8010010 from environment
Starting kernel ...
Jumping to AARCH64 kernel via monitor
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.12.71 (cezary@eko.one.pl) (aarch64-openwrt-linux- musl-gcc (OpenWrt GCC 14.3.0 r32355-02f9e71dd2) 14.3.0, GNU ld (GNU Binutils) 2. 44) #0 SMP Sat Feb 28 13:37:55 2026
[ 0.000000] Machine model: Xiaomi AX3600
[ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 K iB) nomap non-reusable nss@40000000
[ 0.000000] OF: reserved mem: 0x000000004a400000..0x000000004a4fffff (1024 Ki B) nomap non-reusable tzapp@4a400000
[ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 Ki B) nomap non-reusable bootloader@4a600000
[ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 Ki B) nomap non-reusable sbl@4aa00000
[ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004abfffff (1024 Ki B) nomap non-reusable smem@4ab00000
[ 0.000000] OF: reserved mem: 0x000000004ac00000..0x000000004affffff (4096 Ki B) nomap non-reusable memory@4ac00000
[ 0.000000] OF: reserved mem: 0x000000004b000000..0x000000004e6fffff (56320 K iB) nomap non-reusable wcnss@4b000000
[ 0.000000] OF: reserved mem: 0x000000004e700000..0x000000004e7fffff (1024 Ki B) nomap non-reusable q6_etr_dump@50f00000
[ 0.000000] OF: reserved mem: 0x000000004e800000..0x000000004e8fffff (1024 Ki B) nomap non-reusable m3_dump@51000000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff]
[ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff]
[ 0.000000] node 0: [mem 0x000000004a400000-0x000000004a4fffff]
[ 0.000000] node 0: [mem 0x000000004a500000-0x000000004a5fffff]
[ 0.000000] node 0: [mem 0x000000004a600000-0x000000004e8fffff]
[ 0.000000] node 0: [mem 0x000000004e900000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] psci: OSI mode supported.
[ 0.000000] psci: [Firmware Bug]: failed to set PC mode: -1
[ 0.000000] percpu: Embedded 20 pages/cpu s43288 r8192 d30440 u81920
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstyp e=squashfs rootwait uart_en=1 root=/dev/ubiblock0_0
[ 0.000000] Unknown kernel command line parameters "uart_en=1", will be passe d to user space.
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, l inear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, li near)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB
[ 0.000000] software IO TLB: mapped [mem 0x000000005f4c0000-0x000000005f5c000 0] (1MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adju st=1 rcu_task_cpu_ids=4.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: 0xffffffc080010000
[ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt ).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 43980 46511078ns
[ 0.000118] Calibrating delay loop (skipped), value calculated using timer fr equency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000132] pid_max: default: 32768 minimum: 301
[ 0.005155] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linea r)
[ 0.005168] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.010089] rcu: Hierarchical SRCU implementation.
[ 0.010097] rcu: Max phase no-delay instances is 1000.
[ 0.010405] Timer migration: 1 hierarchy levels; 8 children per group; 1 cros snode level
[ 0.010821] smp: Bringing up secondary CPUs ...
[ 0.011495] Detected VIPT I-cache on CPU1
[ 0.011605] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.012365] Detected VIPT I-cache on CPU2
[ 0.012444] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.013215] Detected VIPT I-cache on CPU3
[ 0.013288] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.013370] smp: Brought up 1 node, 4 CPUs
[ 0.013378] SMP: Total of 4 processors activated.
[ 0.013382] CPU: All CPU(s) started at EL1
[ 0.013386] CPU features: detected: 32-bit EL0 Support
[ 0.013391] CPU features: detected: CRC32 instructions
[ 0.013440] alternatives: applying system-wide alternatives
[ 0.013637] CPU features: emulated: Privileged Access Never (PAN) using TTBR0 _EL1 switching
[ 0.013917] Memory: 410336K/524288K available (9088K kernel code, 908K rwdata , 1964K rodata, 960K init, 304K bss, 110996K reserved, 0K cma-reserved)
[ 0.023239] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
[ 0.023264] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.023401] 29408 pages in range for non-PLT usage
[ 0.023406] 520928 pages in range for PLT usage
[ 0.025534] pinctrl core: initialized pinctrl subsystem
[ 0.029976] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.030624] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.030664] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allo cations
[ 0.030698] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic al locations
[ 0.031108] thermal_sys: Registered thermal governor 'step_wise'
[ 0.031171] cpuidle: using governor menu
[ 0.031399] ASID allocator initialised with 65536 entries
[ 0.038869] /soc@0/phy@84000: Fixed dependency cycle(s) with /soc@0/clock-con troller@1800000
[ 0.038952] /soc@0/clock-controller@1800000: Fixed dependency cycle(s) with / soc@0/phy@84000
[ 0.039359] /soc@0/phy@84000: Fixed dependency cycle(s) with /soc@0/clock-con troller@1800000
[ 0.041495] /soc@0/phy@84000: Fixed dependency cycle(s) with /soc@0/clock-con troller@1800000
[ 0.041565] /soc@0/clock-controller@1800000: Fixed dependency cycle(s) with / soc@0/phy@84000
[ 0.090302] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 0.112248] SCSI subsystem initialized
[ 0.112478] usbcore: registered new interface driver usbfs
[ 0.112519] usbcore: registered new interface driver hub
[ 0.112568] usbcore: registered new device driver usb
[ 0.112863] qcom_scm: convention: smc arm 64
[ 0.114644] clocksource: Switched to clocksource arch_sys_counter
[ 0.118486] NET: Registered PF_INET protocol family
[ 0.118652] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear )
[ 0.121018] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.121038] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.121052] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.121101] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear )
[ 0.121245] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.121764] MPTCP token hash table entries: 512 (order: 2, 12288 bytes, linea r)
[ 0.121930] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.121956] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.122254] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.122292] PCI: CLS 0 bytes, default 64
[ 0.123973] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[ 0.124736] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.124743] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc.
[ 0.127439] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 48)
[ 0.134964] qcom-pcie 20000000.pcie: host bridge /soc@0/pcie@20000000 ranges:
[ 0.135026] qcom-pcie 20000000.pcie: IO 0x0020200000..0x002020ffff -> 0 x0000000000
[ 0.135054] qcom-pcie 20000000.pcie: MEM 0x0020220000..0x002fffffff -> 0 x0020220000
[ 0.141086] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.144914] msm_serial 78b3000.serial: msm_serial: detected port #0
[ 0.145005] msm_serial 78b3000.serial: uartclk = 3686400
[ 0.145382] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 20, base_baud = 230400) is a MSM
[ 0.145427] msm_serial: console setup on port #0
[ 0.145464] printk: legacy console [ttyMSM0] enabled
[ 0.246189] qcom-pcie 20000000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, li mit 1024G
[ 0.254702] msm_serial: driver initialized
[ 0.484642] qcom-pcie 20000000.pcie: PCIe Gen.1 x1 link up
[ 1.004172] qcom-pcie 20000000.pcie: PCI host bridge to bus 0000:00
[ 1.009152] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.015304] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 1.020854] pci_bus 0000:00: root bus resource [mem 0x20220000-0x2fffffff]
[ 1.027121] pci 0000:00:00.0: [17cb:1002] type 01 class 0x060400 PCIe Root Po rt
[ 1.033889] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[ 1.041096] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 1.046991] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
[ 1.052190] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 1.058457] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bi t pref]
[ 1.065280] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.076526] pci 0000:01:00.0: [168c:0050] type 00 class 0x028000 PCIe Endpoin t
[ 1.079142] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x001fffff 64bit]
[ 1.086348] pci 0000:01:00.0: ROM [mem 0x00000000-0x0000ffff pref]
[ 1.093115] pci 0000:01:00.0: supports D1
[ 1.098722] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 1.103440] pci 0000:00:00.0: bridge window [mem 0x20300000-0x205fffff]: assi gned
[ 1.108545] pci 0000:00:00.0: BAR 0 [mem 0x20220000-0x20220fff]: assigned
[ 1.116009] pci 0000:01:00.0: BAR 0 [mem 0x20400000-0x205fffff 64bit]: assign ed
[ 1.122823] pci 0000:01:00.0: ROM [mem 0x20300000-0x2030ffff pref]: assigned
[ 1.129894] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 1.137180] pci 0000:00:00.0: bridge window [mem 0x20300000-0x205fffff]
[ 1.142127] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 1.149077] pci_bus 0000:00: resource 5 [mem 0x20220000-0x2fffffff]
[ 1.154446] pci_bus 0000:01: resource 1 [mem 0x20300000-0x205fffff]
[ 1.163403] pcieport 0000:00:00.0: PME: Signaling with IRQ 22
[ 1.167243] pcieport 0000:00:00.0: AER: enabled with IRQ 22
[ 1.171778] loop: module loaded
[ 1.180091] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xaa
[ 1.181356] nand: ESMT GD9FS2G8F2A
[ 1.187970] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB siz e: 128
[ 1.191414] 13 fixed-partitions partitions found on MTD device qcom_nand.0
[ 1.198759] Creating 13 MTD partitions on "qcom_nand.0":
[ 1.205671] 0x000000000000-0x000000100000 : "0:sbl1"
[ 1.212455] 0x000000100000-0x000000200000 : "0:mibib"
[ 1.217353] 0x000000200000-0x000000500000 : "0:qsee"
[ 1.223690] 0x000000500000-0x000000580000 : "0:devcfg"
[ 1.226963] 0x000000580000-0x000000600000 : "0:rpm"
[ 1.231813] 0x000000600000-0x000000680000 : "0:cdt"
[ 1.236619] 0x000000680000-0x000000700000 : "0:appsblenv"
[ 1.241454] 0x000000700000-0x000000800000 : "0:appsbl"
[ 1.247461] 0x000000800000-0x000000880000 : "0:art"
[ 1.252526] 0x000000880000-0x000000900000 : "bdata"
[ 1.256904] 0x000000900000-0x000000a00000 : "pstore"
[ 1.262060] 0x000000a00000-0x000002dc0000 : "ubi_kernel"
[ 1.294068] 0x000002dc0000-0x000010000000 : "rootfs"
[ 1.455627] mtd: setting mtd12 (rootfs) as root device
[ 1.455922] mtdsplit: no squashfs found in "rootfs"
[ 1.466312] spmi_pmic_arb 200f000.spmi: PMIC arbiter version v2 (0x20010000)
[ 1.485940] i2c_dev: i2c /dev entries driver
[ 1.493066] sdhci: Secure Digital Host Controller Interface driver
[ 1.493114] sdhci: Copyright(c) Pierre Ossman
[ 1.498188] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.504420] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
[ 1.512052] NET: Registered PF_INET6 protocol family
[ 1.515268] Segment Routing with IPv6
[ 1.519203] In-situ OAM (IOAM) with IPv6
[ 1.522809] NET: Registered PF_PACKET protocol family
[ 1.526807] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.531958] 8021q: 802.1Q VLAN Support v1.8
[ 1.578141] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 1.578568] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[ 1.584272] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
[ 1.590911] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[ 1.598544] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[ 1.606052] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[ 1.615186] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV
[ 1.622125] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 816000 uV
[ 1.632119] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 880000 uV
[ 1.641926] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 968000 uV
[ 1.651784] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 708, quot_offset[ 7]= 0
[ 1.661546] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 917, quot_offset[ 7]= 205
[ 1.672396] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1023, quot_offset[ 7]= 105
[ 1.683335] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1177, quot_offset[ 7]= 150
[ 1.694502] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[ 1.698633] cpufreq: cpufreq_online: CPU0: Running at unlisted initial freque ncy: 800000 KHz, changing to: 1017600 KHz
[ 1.714134] remoteproc remoteproc0: cd00000.q6v5_wcss is available
[ 1.723067] ubi0: attaching mtd12
[ 2.344651] random: crng init done
[ 2.669991] ubi0: scanning is finished
[ 2.735138] ubi0: attached mtd12 (name "rootfs", size 210 MiB)
[ 2.735181] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.739875] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.746750] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.753590] ubi0: good PEBs: 1682, bad PEBs: 0, corrupted PEBs: 0
[ 2.760366] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 12 8
[ 2.766618] ubi0: max/mean erase counter: 64/37, WL threshold: 4096, image se quence number: 488066330
[ 2.773734] ubi0: available PEBs: 0, total reserved PEBs: 1682, PEBs reserved for bad PEB handling: 40
[ 2.783045] ubi0: background thread "ubi_bgt0d" started, PID 652
[ 2.792850] block ubiblock0_0: created from ubi0:0(rootfs)
[ 2.798530] clk: Disabling unused-[ 2.810995] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.811487] Freeing unused kernel memory: 960K
[ 2.817381] Run /sbin/init as init process
[ 3.004131] init: Console is alive
[ 3.004266] init: - watchdog -
[ 3.479214] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.550680] gpio_button_hotplug: loading out-of-tree module taints kernel.
[ 3.634298] ssdk_dt_parse_interrupt[942]:INFO:intr-gpio does not exist
[ 4.009810] regi_init[2525]:INFO:Initializing HPPE Done!!
[ 4.009925] regi_init[2574]:INFO:qca-ssdk module init succeeded!
[ 4.016785] EDMA ver 1 hw init
[ 4.020497] EDMA HW Reset completed succesfully
[ 4.023170] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
[ 4.027587] RxDesc:1 (15-15) RxFill:1 (7-7)
[ 4.205478] Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:ph y_addr=90000.mdio-1:01, irq=POLL)
[ 4.275000] Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:ph y_addr=90000.mdio-1:02, irq=POLL)
[ 4.345022] Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:ph y_addr=90000.mdio-1:03, irq=POLL)
[ 4.415041] Qualcomm QCA8075 90000.mdio-1:04: attached PHY driver (mii_bus:ph y_addr=90000.mdio-1:04, irq=POLL)
[ 4.415953] **********************************************************
[ 4.423946] * NSS Data Plane driver
[ 4.430473] **********************************************************
[ 4.446600] kmodloader: done loading kernel modules from /etc/modules-boot.d/ *
[ 4.447914] init: - preinit -
Cannot parse config file '/etc/fw_env.config': No such file or directory
Failed to find NVMEM device
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 9.659562] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 9.659722] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 867
[ 9.722001] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "root fs_data"
[ 9.722043] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O u nit sizes: 2048 bytes/2048 bytes
[ 9.728837] UBIFS (ubi0:1): FS size: 187416576 bytes (178 MiB, 1476 LEBs), ma x 1488 LEBs, journal size 9396224 bytes (8 MiB, 74 LEBs)
[ 9.738759] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 9.750698] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 53505 3DA-11BA-45C8-9A11-6782A31BC6D3, small LPT model
[ 9.761090] mount_root: switching to ubifs overlay
[ 9.772574] overlayfs: null uuid detected in lower fs '/', falling back to xi no=off,index=off,nfs_export=off.
[ 9.778002] urandom-seed: Seeding with /etc/urandom.seed
[ 9.863706] procd: - early -
[ 9.863821] procd: - watchdog -
[ 10.430969] procd: - watchdog -
[ 10.432349] procd: - ubus -
[ 10.587297] procd: - init -
Please press Enter to activate this console.
[ 11.029987] kmodloader: loading kernel modules from /etc/modules.d/*
[ 11.180355] tun: Universal TUN/TAP device driver, 1.6
[ 11.189995] Loading modules backported from Linux version v6.18.7-0-g5dfbc535 7
[ 11.190038] Backport generated by backports.git c8a37ce
[ 11.205737] NET: Registered PF_QIPCRTR protocol family
[ 11.242307] urngd: v1.0.2 started.
[ 11.397234] PPP generic driver version 2.4.2
[ 11.398293] NET: Registered PF_PPPOX protocol family
[ 11.402746] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for info rmation.
[ 11.405566] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c 4.com>. All Rights Reserved.
[ 11.454916] ath10k 6.15 driver, optimized for CT firmware, probing pci device : 0x50.
[ 11.455513] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 11.462171] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 r eset_mode 0
[ 12.289287] ath10k_pci 0000:01:00.0: qca9887 hw1.0 target 0x4100016d chip_id 0x004000ff sub 0000:0000
[ 12.289355] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 12.297776] ath10k_pci 0000:01:00.0: firmware ver 10.1-ct-87-__fW-022-d8dab8e 8 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,peer-fixed-rate,txstatus-noack,wmi -10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,t xrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 81827605
[ 12.334752] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 b4ce36 fa
[ 13.203060] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16 peers: 127 ti d: 256
[ 13.210053] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
[ 13.210100] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
[ 13.215829] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 24400 iram: 24364'
[ 13.250052] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal nvmem max-sta 128 raw 0 hwcrypto 1
[ 13.263648] ath10k_pci 0000:01:00.0: NOTE: Firmware DBGLOG output disabled i n debug_mask: 0x10000000
[ 13.487756] ath11k c000000.wifi: ipq8074 hw2.0
[ 13.487797] ath11k c000000.wifi: FW memory mode: 1
[ 13.654270] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
[ 13.654828] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[ 14.911816] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
[ 14.956028] ath11k c000000.wifi: qmi fail to get qcom,m3-dump-addr, ignore m3 dump mem req
[ 14.963470] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff so c_id 0xffffffff
[ 14.963507] ath11k c000000.wifi: fw_version 0x290b84a5 fw_build_timestamp 202 4-09-23 11:32 fw_build_id WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
[ 20.030015] remoteproc remoteproc0: stopped remote processor cd00000.q6v5_wcs s
[ 20.030066] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
[ 20.036254] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[ 20.389653] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
[ 20.393487] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 20.433642] ath11k c000000.wifi: qmi fail to get qcom,m3-dump-addr, ignore m3 dump mem req
[ 20.441120] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff so c_id 0xffffffff
[ 20.441177] ath11k c000000.wifi: fw_version 0x290b84a5 fw_build_timestamp 202 4-09-23 11:32 fw_build_id WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
[ 20.615433] ath11k c000000.wifi: htt event 48 not handled
[ 23.709808] br-lan: port 1(lan1) entered blocking state
[ 23.709860] br-lan: port 1(lan1) entered disabled state
[ 23.713904] nss-dp 3a001400.dp3 lan1: entered allmulticast mode
[ 23.719415] nss-dp 3a001400.dp3 lan1: entered promiscuous mode
[ 23.735815] br-lan: port 2(lan2) entered blocking state
[ 23.735872] br-lan: port 2(lan2) entered disabled state
[ 23.739916] nss-dp 3a001600.dp4 lan2: entered allmulticast mode
[ 23.745438] nss-dp 3a001600.dp4 lan2: entered promiscuous mode
[ 23.765675] br-lan: port 3(lan3) entered blocking state
[ 23.765727] br-lan: port 3(lan3) entered disabled state
[ 23.769784] nss-dp 3a001800.dp5 lan3: entered allmulticast mode
[ 23.775287] nss-dp 3a001800.dp5 lan3: entered promiscuous mode
[ 25.845296] nss-dp 3a001600.dp4 lan2: PHY Link up speed: 1000
[ 25.845362] br-lan: port 2(lan2) entered blocking state
[ 25.850037] br-lan: port 2(lan2) entered forwarding state
[ 33.124710] l11: disabling
