501 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,913

Odp: Zmiany w wydaniu OpenWrt 24.10

Wleciały nowe buildy. Przeportowali uqmi na nową wersję. Sprawdzałem na trzech różnych modemach na qmi i działało, ale wiecie - uwaga na ew możliwe problemy.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

502 Odpowiedź przez roblad

  • roblad
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-03-14
  • Posty: 1,036

Odp: Zmiany w wydaniu OpenWrt 24.10

udalo sie dodac do dzisiejszego wydania Cudy WR3000P?

503 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,913

Odp: Zmiany w wydaniu OpenWrt 24.10

roblad napisał/a:

udalo sie dodac do dzisiejszego wydania Cudy WR3000P?

A czemu nie sprawdziłeś?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

504 Odpowiedź przez roblad

  • roblad
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-03-14
  • Posty: 1,036

Odp: Zmiany w wydaniu OpenWrt 24.10

Cezary napisał/a:
roblad napisał/a:

udalo sie dodac do dzisiejszego wydania Cudy WR3000P?

A czemu nie sprawdziłeś?


Ok, Jest, sorry, nie pomyslalem, ale chyba nie udalo sie wrzucic luci-theme-argon

505 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,913

Odp: Zmiany w wydaniu OpenWrt 24.10

Jest jak był

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

506 Odpowiedź przez roblad

  • roblad
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-03-14
  • Posty: 1,036

Odp: Zmiany w wydaniu OpenWrt 24.10

Cezary napisał/a:

Jest jak był

ok, cos sie nieodswiezylo

507 Odpowiedź przez Królik

  • Skąd: Warszawa
  • Zarejestrowany: 2015-07-10
  • Posty: 1,106

Odp: Zmiany w wydaniu OpenWrt 24.10

@Cezary

Dorzuciłbyś do 24.10 w kolejnym buildzie mojego cudaka?

https://github.com/openwrt/openwrt/pull/20287

Mam i używam: Fujitsu Futro S720, Netgear R6220, Unielec U7621-06, TP-Linki 1043 V1, V2, Linksysy EA7500v2, AeroHive AP350, Linksys EA8500, ZTE MF286d.
Mam: D-Linki DWR-921, DWR-118, DWR-116, TP-Link WDR-4900 v1, Checkpoint L-50, Linksysy 1900ACS, LB-Link BL-W1200,

Królik's Strona

508 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,913

Odp: Zmiany w wydaniu OpenWrt 24.10

Tak, dorzucę. Czemu w cmdline jest loglevel=8?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

509 Odpowiedź przez Królik

  • Skąd: Warszawa
  • Zarejestrowany: 2015-07-10
  • Posty: 1,106

Odp: Zmiany w wydaniu OpenWrt 24.10

Cezary napisał/a:

Tak, dorzucę. Czemu w cmdline jest loglevel=8?

Wzięte bootargs z dtsa fabrycznego. W sumie się nad tym nie zastanawiałem.

Mam i używam: Fujitsu Futro S720, Netgear R6220, Unielec U7621-06, TP-Linki 1043 V1, V2, Linksysy EA7500v2, AeroHive AP350, Linksys EA8500, ZTE MF286d.
Mam: D-Linki DWR-921, DWR-118, DWR-116, TP-Link WDR-4900 v1, Checkpoint L-50, Linksysy 1900ACS, LB-Link BL-W1200,

Królik's Strona

510 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,913

Odp: Zmiany w wydaniu OpenWrt 24.10

Wywal, pewnie komuś komunikaty w logach przeszkadzały.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

511 Odpowiedź przez Królik

  • Skąd: Warszawa
  • Zarejestrowany: 2015-07-10
  • Posty: 1,106

Odp: Zmiany w wydaniu OpenWrt 24.10

Cezary napisał/a:

Wywal, pewnie komuś komunikaty w logach przeszkadzały.

Poprawiłem. W międzyczasie ktoś też zwrócił uwagę na całą tą linię.

Mam i używam: Fujitsu Futro S720, Netgear R6220, Unielec U7621-06, TP-Linki 1043 V1, V2, Linksysy EA7500v2, AeroHive AP350, Linksys EA8500, ZTE MF286d.
Mam: D-Linki DWR-921, DWR-118, DWR-116, TP-Link WDR-4900 v1, Checkpoint L-50, Linksysy 1900ACS, LB-Link BL-W1200,

Królik's Strona

512 Odpowiedź przez ZbiG (edytowany przez ZbiG 2025-10-23 00:04:53)

  • ZbiG
  • ZbiG
  • Użytkownik
  • Nieaktywny
  • Skąd: Gdańsk/Amsterdam
  • Zarejestrowany: 2022-09-14
  • Posty: 233

Odp: Zmiany w wydaniu OpenWrt 24.10

Pojawiła się wersja 24.10.4.

Xiaomi Mi Router AX9000 ver. EU + OpenWrt 25.12.0
NETGEAR Nighthawk X4S R7800 + OpenWRT 25.12.0
Netgear Nighthawk R7000 & 6400 v2 + FreshTomato
TP-Link TL-WR842ndv1 + DD-WRT

513 Odpowiedź przez lukjod

  • lukjod
  • Użytkownik
  • Nieaktywny
  • Skąd: Warszawa
  • Zarejestrowany: 2014-04-06
  • Posty: 235

Odp: Zmiany w wydaniu OpenWrt 24.10

@Cezary
Czy planujesz nowe buildy w ty lub przyszlym tygodniu?

ASUS ax4200 & Xiaomi Redmi ax6000 dumbAP @ openwrt 24.10 & Huawei e5786 jako backup

514 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,913

Odp: Zmiany w wydaniu OpenWrt 24.10

Chyba jeszcze następnym. Przez święta i potrzeby wyjazdów nie wiem czy się wyrobię.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

515 Odpowiedź przez Cybe

  • Cybe
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2020-06-23
  • Posty: 494

Odp: Zmiany w wydaniu OpenWrt 24.10

Cybe napisał/a:
Cybe napisał/a:

XR500, R28432 – po restarcie zamienia mi miejscami phy0-ap0 i phy1-ap0, które mam skonfigurowane pod LED-y na oba radia. Co ciekawe, nie dzieje się tak w R28364. Tam się coś zmieniło mocno? P.S. Na razie nie sprawdzałem tego na innych sprzętach.

Cezary napisał/a:

wywal konfig wifi, zrestartuj, nic nie zmieniaj, zrestartuj i zobacz czy będzie jaki jak był.

Zadziałało, ale tylko do pierwszego resetu. Problemów nie ma dopiero w R28529

Czarek, zerkniesz? Znowu mi się po restarcie phy0 z phy1 miejscami zamieniają (r28881):
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    0.000000] Linux version 6.6.106 (cezary@eko.one.pl) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 13.3.0 r28010-49d8f4b833) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Thu Sep 25 20:55:15 2025
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] CPU: div instructions available: patching division code
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] OF: fdt: Machine model: Netgear Nighthawk XR500
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] Memory policy: Data cache writealloc
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] OF: reserved mem: 0x40000000..0x40ffffff (16384 KiB) nomap non-reusable nss@40000000
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] OF: reserved mem: 0x41000000..0x411fffff (2048 KiB) nomap non-reusable smem@41000000
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] OF: reserved mem: 0x41200000..0x414fffff (3072 KiB) nomap non-reusable rsvd@41200000
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] OF: reserved mem: 0x42100000..0x4213ffff (256 KiB) map non-reusable ramoops@42100000
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] OF: reserved mem: 0x5fe00000..0x5fffffff (2048 KiB) map reusable rsvd@5fe00000
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] Zone ranges:
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000042000000-0x000000005fffffff]
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000]   HighMem  empty
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] Movable zone start for each node
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] Early memory node ranges
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000042000000-0x000000005fffffff]
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000042000000-0x000000005fffffff]
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] percpu: Embedded 13 pages/cpu s21780 r8192 d23276 u53248
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    0.000000] pcpu-alloc: s21780 r8192 d23276 u53248 alloc=13*4096
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    0.000000] Kernel command line:
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 121800
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] Memory: 473084K/491520K available (7739K kernel code, 649K rwdata, 1208K rodata, 1024K init, 249K bss, 18436K reserved, 0K cma-reserved, 0K highmem)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000]     Tracing variant of Tasks RCU enabled.
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000001] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000016] Switching to timer-based delay loop, resolution 160ns
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000319] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000344] CPU: Testing write buffer coherency: ok
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.000398] pid_max: default: 32768 minimum: 301
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.008597] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.008621] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.016402] qcom_scm: convention: smc legacy
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.017931] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.018164] Setting up static identity map for 0x42300000 - 0x42300060
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.018392] rcu: Hierarchical SRCU implementation.
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.018404] rcu:     Max phase no-delay instances is 1000.
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.019040] smp: Bringing up secondary CPUs ...
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.021212] smp: Brought up 1 node, 2 CPUs
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.021230] SMP: Total of 2 processors activated (25.00 BogoMIPS).
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.021243] CPU: All CPU(s) started in SVC mode.
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.038372] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.038614] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.038646] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.043085] pinctrl core: initialized pinctrl subsystem
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.046012] NET: Registered PF_NETLINK/PF_ROUTE protocol family
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.046409] DMA: preallocated 256 KiB pool for atomic coherent allocations
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.048184] thermal_sys: Registered thermal governor 'step_wise'
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.048304] cpuidle: using governor ladder
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.048373] cpuidle: using governor menu
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.084458] usbcore: registered new interface driver usbfs
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.084542] usbcore: registered new interface driver hub
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.084612] usbcore: registered new device driver usb
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.084707] pps_core: LinuxPPS API ver. 1 registered
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.084716] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.084792] PTP clock support registered
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.088236] clocksource: Switched to clocksource dg_timer
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.098073] NET: Registered PF_INET protocol family
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.098296] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.099981] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.100107] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.100133] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.100169] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.100249] TCP: Hash tables configured (established 4096 bind 4096)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.100818] MPTCP token hash table entries: 512 (order: 1, 8192 bytes, linear)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.101168] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.101198] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.101854] NET: Registered PF_UNIX/PF_LOCAL protocol family
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.101917] PCI: CLS 0 bytes, default 64
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.104132] workingset: timestamp_bits=14 max_order=17 bucket_order=3
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.105718] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.105744] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.394881] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.404801] krait-cc soc:clock-controller: CPU0 @ 800000 KHz
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.404837] krait-cc soc:clock-controller: CPU1 @ Undefined rate. Forcing new rate.
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.405185] krait-cc soc:clock-controller: CPU1 @ 384000 KHz
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.405210] krait-cc soc:clock-controller: L2 @ Undefined rate. Forcing new rate.
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.405469] krait-cc soc:clock-controller: L2 @ 384000 KHz
Sun Nov  2 06:57:26 2025 kern.warn kernel: [    0.409150] qcom-pcie 1b500000.pci: supply vdda not found, using dummy regulator
Sun Nov  2 06:57:26 2025 kern.warn kernel: [    0.409443] qcom-pcie 1b500000.pci: supply vdda_phy not found, using dummy regulator
Sun Nov  2 06:57:26 2025 kern.warn kernel: [    0.409699] qcom-pcie 1b500000.pci: supply vdda_refclk not found, using dummy regulator
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.409977] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    0.410038] qcom-pcie 1b500000.pci: Parsing ranges property...
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.410120] qcom-pcie 1b500000.pci:       IO 0x000fe00000..0x000fe0ffff -> 0x0000000000
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.410171] qcom-pcie 1b500000.pci:      MEM 0x0008000000..0x000fdfffff -> 0x0008000000
Sun Nov  2 06:57:26 2025 kern.warn kernel: [    0.410888] qcom-pcie 1b700000.pci: supply vdda not found, using dummy regulator
Sun Nov  2 06:57:26 2025 kern.warn kernel: [    0.411247] qcom-pcie 1b700000.pci: supply vdda_phy not found, using dummy regulator
Sun Nov  2 06:57:26 2025 kern.warn kernel: [    0.411355] qcom-pcie 1b700000.pci: supply vdda_refclk not found, using dummy regulator
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.411646] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    0.411687] qcom-pcie 1b700000.pci: Parsing ranges property...
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.411734] qcom-pcie 1b700000.pci:       IO 0x0031e00000..0x0031e0ffff -> 0x0000000000
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.411776] qcom-pcie 1b700000.pci:      MEM 0x002e000000..0x0031dfffff -> 0x002e000000
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.414177] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.416750] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.424509] msm_serial 16340000.serial: msm_serial: detected port #0
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.424596] msm_serial 16340000.serial: uartclk = 7372800
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.425156] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 29, base_baud = 460800) is a MSM
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.425222] msm_serial: console setup on port #0
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.425338] printk: console [ttyMSM0] enabled
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    0.540474] qcom-pcie 1b500000.pci: Using 32 MSI vectors
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.545870] msm_serial: driver initialized
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.552636] qcom-pcie 1b500000.pci: iATU: unroll F, 8 ob, 8 ib, align 4K, limit 4G
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    0.559548] qcom-pcie 1b700000.pci: Using 32 MSI vectors
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.658610] qcom-pcie 1b500000.pci: PCIe Gen.2 x1 link up
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.664586] qcom-pcie 1b700000.pci: iATU: unroll F, 8 ob, 8 ib, align 4K, limit 4G
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.670930] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.692692] loop: module loaded
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.697286] pci_bus 0000:00: root bus resource [bus 00-ff]
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.739626] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xaa
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.743631] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.749898] nand: Macronix MX30UF2G18AC
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.754570] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.762380] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    0.772174] pci_bus 0000:00: scanning bus
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.772235] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
Sun Nov  2 06:57:26 2025 kern.err kernel: [    0.778899] qcom-nandc 1ac00000.nand-controller: Opcode not supported: 238
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.783954] pci 0000:00:00.0: supports D1
Sun Nov  2 06:57:26 2025 kern.err kernel: [    0.789810] Block protection check failed
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.796666] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    0.803036] 8 fixed-partitions partitions found on MTD device qcom_nand.0
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    0.806739] pci 0000:00:00.0: PME# disabled
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    0.810931] Creating 8 MTD partitions on "qcom_nand.0":
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    0.820333] pci_bus 0000:00: fixups for bus
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    0.821696] 0x000000000000-0x000000c80000 : "qcadata"
Sun Nov  2 06:57:26 2025 kern.info kernel: [    0.826535] PCI: bus0: Fast back to back transfers disabled
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.237326] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.237691] pci_bus 0000:01: scanning bus
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.238183] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.243220] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.251325] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.255749] pci 0000:01:00.0: PME# disabled
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.257999] pci_bus 0000:01: fixups for bus
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.258111] PCI: bus1: Fast back to back transfers disabled
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.261780] pci_bus 0000:01: bus scan returning with max=01
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.261807] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.261832] pci_bus 0000:00: bus scan returning with max=ff
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.261943] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.267106] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.274322] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.281228] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.286933] pcieport 0000:00:00.0: assign IRQ: got 32
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.287285] qcom-pcie 1b500000.pci: msi#0 address_hi 0x0 address_lo 0x43ac9000
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.288708] qcom-pcie 1b700000.pci: PCIe Gen.1 x1 link up
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.293660] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.298838] pci_bus 0001:00: root bus resource [bus 00-ff]
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.304821] pci_bus 0001:00: root bus resource [io  0x10000-0x1ffff] (bus address [0x0000-0xffff])
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.310296] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.319290] pci_bus 0001:00: scanning bus
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.319373] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.326313] pci 0001:00:00.0: supports D1
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.332260] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.336161] pci 0001:00:00.0: PME# disabled
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.341829] pci_bus 0001:00: fixups for bus
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.341870] PCI: bus0: Fast back to back transfers disabled
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.341926] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.342268] pci_bus 0001:01: scanning bus
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.342764] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.347486] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    1.348694] 0x000000c80000-0x000001180000 : "APPSBL"
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.354874] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.365306] pci 0001:01:00.0: PME# disabled
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.366036] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0001:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.372867] pci_bus 0001:01: fixups for bus
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.373062] PCI: bus1: Fast back to back transfers disabled
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.386047] pci_bus 0001:01: bus scan returning with max=01
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.386102] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.386129] pci_bus 0001:00: bus scan returning with max=ff
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.386158] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.391513] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.398604] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.405515] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.411176] pcieport 0001:00:00.0: assign IRQ: got 34
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.411582] qcom-pcie 1b700000.pci: msi#0 address_hi 0x0 address_lo 0x43bc6000
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.412993] pcieport 0000:00:00.0: AER: enabled with IRQ 33
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.417930] pcieport 0000:00:00.0: save config 0x00: 0x010117cb
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.417954] pcieport 0000:00:00.0: save config 0x04: 0x00100547
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.417971] pcieport 0000:00:00.0: save config 0x08: 0xff000000
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.417987] pcieport 0000:00:00.0: save config 0x0c: 0x00010010
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.418003] pcieport 0000:00:00.0: save config 0x10: 0x00000000
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.418100] pcieport 0000:00:00.0: save config 0x14: 0x00000000
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.418118] pcieport 0000:00:00.0: save config 0x18: 0x00ff0100
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.418165] pcieport 0000:00:00.0: save config 0x1c: 0x000000f0
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.418184] pcieport 0000:00:00.0: save config 0x20: 0x08100800
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.418203] pcieport 0000:00:00.0: save config 0x24: 0x0001fff1
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.418219] pcieport 0000:00:00.0: save config 0x28: 0x00000000
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.418311] pcieport 0000:00:00.0: save config 0x2c: 0x00000000
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.418331] pcieport 0000:00:00.0: save config 0x30: 0x00000000
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.418380] pcieport 0000:00:00.0: save config 0x34: 0x00000040
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.418398] pcieport 0000:00:00.0: save config 0x38: 0x00000000
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.418569] pcieport 0000:00:00.0: save config 0x3c: 0x00030120
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.420567] pcieport 0001:00:00.0: AER: enabled with IRQ 35
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    1.421858] 0x000001180000-0x000001200000 : "APPSBLENV"
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.423088] pcieport 0001:00:00.0: save config 0x00: 0x010117cb
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.428615] pcieport 0001:00:00.0: save config 0x04: 0x00100547
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.428633] pcieport 0001:00:00.0: save config 0x08: 0xff000000
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.428664] pcieport 0001:00:00.0: save config 0x0c: 0x00010010
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.428684] pcieport 0001:00:00.0: save config 0x10: 0x00000000
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.428700] pcieport 0001:00:00.0: save config 0x14: 0x00000000
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.428716] pcieport 0001:00:00.0: save config 0x18: 0x00ff0100
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.428824] pcieport 0001:00:00.0: save config 0x1c: 0x000000f0
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.428876] pcieport 0001:00:00.0: save config 0x20: 0x2e102e00
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.428897] pcieport 0001:00:00.0: save config 0x24: 0x0001fff1
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.428913] pcieport 0001:00:00.0: save config 0x28: 0x00000000
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.428929] pcieport 0001:00:00.0: save config 0x2c: 0x00000000
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.428944] pcieport 0001:00:00.0: save config 0x30: 0x00000000
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.429042] pcieport 0001:00:00.0: save config 0x34: 0x00000040
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.429060] pcieport 0001:00:00.0: save config 0x38: 0x00000000
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    1.429109] pcieport 0001:00:00.0: save config 0x3c: 0x00030122
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    1.431527] 0x000001200000-0x000001340000 : "art"
Sun Nov  2 06:57:26 2025 kern.err kernel: [    1.437536] OF: Bad cell count for /soc/nand-controller@1ac00000/nand@0/partitions
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    1.439230] 0x000001340000-0x000001480000 : "artbak"
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    1.449808] 0x000001480000-0x000001880000 : "kernel"
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    1.459828] 0x000001880000-0x00000e680000 : "ubi"
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    1.837553] 0x00000e680000-0x00000ee00000 : "reserve"
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.871803] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_wake_irq not found
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.871881] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_lpi not found
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.879121] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.885388] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.891027] ipq806x-gmac-dwmac 37200000.ethernet:     DWMAC1000
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.898351] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.904321] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.912015] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.919885] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.925610] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.933110] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.939872] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.947310] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.954413] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.963960] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.969294] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.976692] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.983295] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.989286] ipq806x-gmac-dwmac 37400000.ethernet:     DWMAC1000
Sun Nov  2 06:57:26 2025 kern.info kernel: [    1.996614] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.002540] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.010239] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.018054] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.023954] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.031326] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.038022] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.045665] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.052708] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.062180] i2c_dev: i2c /dev entries driver
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.073554] sdhci: Secure Digital Host Controller Interface driver
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.073607] sdhci: Copyright(c) Pierre Ossman
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.078747] sdhci-pltfm: SDHCI platform and OF driver helper
Sun Nov  2 06:57:26 2025 kern.err kernel: [    2.086024] nvmem qfprom8: cell calib raw len 11 unaligned to nvmem word size 4
Sun Nov  2 06:57:26 2025 kern.err kernel: [    2.088940] nvmem qfprom8: cell calib_backup raw len 11 unaligned to nvmem word size 4
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.098298] NET: Registered PF_INET6 protocol family
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.106932] Segment Routing with IPv6
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.109180] In-situ OAM (IOAM) with IPv6
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.112678] NET: Registered PF_PACKET protocol family
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.116594] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.122448] 8021q: 802.1Q VLAN Support v1.8
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    2.134788] Registering SWP/SWPB emulation handler
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.205760] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.219792] s1a: Bringing 0uV into 1050000-1050000uV
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.220249] s1b: Bringing 0uV into 1050000-1050000uV
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.224207] s2a: Bringing 0uV into 775000-775000uV
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.229222] s2b: Bringing 0uV into 775000-775000uV
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.450072] qca8k 37000000.mdio-mii:10: configuring for fixed/rgmii link mode
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.459702] qca8k 37000000.mdio-mii:10: Link is Up - 1Gbps/Full - flow control off
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.465439] qca8k 37000000.mdio-mii:10: configuring for fixed/sgmii link mode
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.478123] qca8k 37000000.mdio-mii:10: Link is Up - 1Gbps/Full - flow control off
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.583069] qca8k 37000000.mdio-mii:10 lan4 (uninitialized): PHY [qca8k-0.0:00] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.702997] qca8k 37000000.mdio-mii:10 lan3 (uninitialized): PHY [qca8k-0.0:01] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.813086] qca8k 37000000.mdio-mii:10 lan2 (uninitialized): PHY [qca8k-0.0:02] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    2.923050] qca8k 37000000.mdio-mii:10 lan1 (uninitialized): PHY [qca8k-0.0:03] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    3.033049] qca8k 37000000.mdio-mii:10 wan (uninitialized): PHY [qca8k-0.0:04] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    3.034418] ipq806x-gmac-dwmac 37200000.ethernet eth0: entered promiscuous mode
Sun Nov  2 06:57:26 2025 kern.info kernel: [    3.044488] ipq806x-gmac-dwmac 37400000.ethernet eth1: entered promiscuous mode
Sun Nov  2 06:57:26 2025 kern.info kernel: [    3.051341] DSA: tree 0 setup
Sun Nov  2 06:57:26 2025 kern.warn kernel: [    3.068625] thermal thermal_zone0: failed to read out thermal zone (-110)
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    3.085382] UBI: auto-attach mtd6
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    3.085406] ubi0: attaching mtd6
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    3.098648] random: crng init done
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    4.547144] ubi0: scanning is finished
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    4.556915] ubi0: attached mtd6 (name "ubi", size 206 MiB)
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    4.556939] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    4.561355] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    4.568145] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    4.575068] ubi0: good PEBs: 1647, bad PEBs: 1, corrupted PEBs: 0
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    4.581841] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    4.588023] ubi0: max/mean erase counter: 8/3, WL threshold: 4096, image sequence number: 1709846072
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    4.595212] ubi0: available PEBs: 0, total reserved PEBs: 1647, PEBs reserved for bad PEB handling: 39
Sun Nov  2 06:57:26 2025 kern.info kernel: [    4.605275] block ubiblock0_0: created from ubi0:0(rootfs)
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    4.613612] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    4.613678] ubi0: background thread "ubi_bgt0d" started, PID 73
Sun Nov  2 06:57:26 2025 kern.info kernel: [    4.619231] clk: Disabling unused clocks
Sun Nov  2 06:57:26 2025 kern.info kernel: [    4.635022] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Sun Nov  2 06:57:26 2025 kern.info kernel: [    4.635566] Freeing unused kernel image (initmem) memory: 1024K
Sun Nov  2 06:57:26 2025 kern.info kernel: [    4.641378] Run /sbin/init as init process
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    4.646936]   with arguments:
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    4.646940]     /sbin/init
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    4.646944]   with environment:
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    4.646949]     HOME=/
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    4.646952]     TERM=linux
Sun Nov  2 06:57:26 2025 user.info kernel: [    4.963597] init: Console is alive
Sun Nov  2 06:57:26 2025 user.info kernel: [    4.963736] init: - watchdog -
Sun Nov  2 06:57:26 2025 user.info kernel: [    4.965965] init: Watchdog has previously reset the system
Sun Nov  2 06:57:26 2025 user.info kernel: [    5.918026] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Sun Nov  2 06:57:26 2025 kern.warn kernel: [    5.971013] gpio_button_hotplug: loading out-of-tree module taints kernel.
Sun Nov  2 06:57:26 2025 kern.info kernel: [    5.974912] pstore: Using crash dump compression: deflate
Sun Nov  2 06:57:26 2025 kern.info kernel: [    5.976798] printk: console [ramoops-1] enabled
Sun Nov  2 06:57:26 2025 kern.info kernel: [    5.983382] pstore: Registered ramoops as persistent store backend
Sun Nov  2 06:57:26 2025 kern.info kernel: [    5.986591] ramoops: using 0x40000@0x42100000, ecc: 0
Sun Nov  2 06:57:26 2025 kern.notice kernel: [    5.998657] SCSI subsystem initialized
Sun Nov  2 06:57:26 2025 kern.debug kernel: [    6.001975] libata version 3.00 loaded.
Sun Nov  2 06:57:26 2025 kern.warn kernel: [    6.003832] ahci 29000000.sata: supply ahci not found, using dummy regulator
Sun Nov  2 06:57:26 2025 kern.warn kernel: [    6.003974] ahci 29000000.sata: supply phy not found, using dummy regulator
Sun Nov  2 06:57:26 2025 kern.warn kernel: [    6.010127] ahci 29000000.sata: supply target not found, using dummy regulator
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.017078] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.024007] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.029457] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.038607] scsi host0: ahci
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.046448] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 46
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.382491] ata1: SATA link down (SStatus 0 SControl 300)
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.503511] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.503561] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.508039] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000008002000010
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.515596] xhci-hcd xhci-hcd.0.auto: irq 47, io mem 0x10000000
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.525046] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.530800] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.536283] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.544343] hub 1-0:1.0: USB hub found
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.550531] hub 1-0:1.0: 1 port detected
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.554436] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.559552] hub 2-0:1.0: USB hub found
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.566340] hub 2-0:1.0: 1 port detected
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.570213] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.573965] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.579443] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000008002000010
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.586826] xhci-hcd xhci-hcd.1.auto: irq 48, io mem 0x11000000
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.596380] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.602145] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.607637] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.615664] hub 3-0:1.0: USB hub found
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.621885] hub 3-0:1.0: 1 port detected
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.625773] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.630210] hub 4-0:1.0: USB hub found
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.637692] hub 4-0:1.0: 1 port detected
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.645140] usbcore: registered new interface driver usb-storage
Sun Nov  2 06:57:26 2025 kern.info kernel: [    6.646176] usbcore: registered new interface driver uas
Sun Nov  2 06:57:26 2025 user.info kernel: [    6.651588] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Sun Nov  2 06:57:26 2025 user.info kernel: [    6.662210] init: - preinit -
Sun Nov  2 06:57:26 2025 kern.info kernel: [    7.620716] ipq806x-gmac-dwmac 37200000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
Sun Nov  2 06:57:26 2025 kern.info kernel: [    7.621436] dwmac1000: Master AXI performs any burst length
Sun Nov  2 06:57:26 2025 kern.info kernel: [    7.627879] ipq806x-gmac-dwmac 37200000.ethernet eth0: No Safety Features support found
Sun Nov  2 06:57:26 2025 kern.info kernel: [    7.643277] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
Sun Nov  2 06:57:26 2025 kern.info kernel: [    7.643408] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
Sun Nov  2 06:57:26 2025 kern.info kernel: [    7.658612] ipq806x-gmac-dwmac 37200000.ethernet eth0: configuring for fixed/rgmii link mode
Sun Nov  2 06:57:26 2025 kern.info kernel: [    7.658917] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Sun Nov  2 06:57:26 2025 kern.info kernel: [    7.672767] qca8k 37000000.mdio-mii:10 lan1: configuring for phy/internal link mode
Sun Nov  2 06:57:26 2025 user.info kernel: [   11.928261] mount_root: loading kmods from internal overlay
Sun Nov  2 06:57:26 2025 user.info kernel: [   11.946303] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Sun Nov  2 06:57:26 2025 user.info kernel: [   11.948821] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Sun Nov  2 06:57:26 2025 user.info kernel: [   12.091975] block: attempting to load /tmp/overlay/upper/etc/config/fstab
Sun Nov  2 06:57:26 2025 user.err kernel: [   12.092128] block: unable to load configuration (fstab: Entry not found)
Sun Nov  2 06:57:26 2025 user.info kernel: [   12.097815] block: attempting to load /tmp/overlay/etc/config/fstab
Sun Nov  2 06:57:26 2025 user.err kernel: [   12.104744] block: unable to load configuration (fstab: Entry not found)
Sun Nov  2 06:57:26 2025 user.info kernel: [   12.110647] block: attempting to load /etc/config/fstab
Sun Nov  2 06:57:26 2025 user.err kernel: [   12.120957] block: unable to load configuration (fstab: Entry not found)
Sun Nov  2 06:57:26 2025 user.err kernel: [   12.122467] block: no usable configuration
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.132527] UBIFS (ubi0:1): Mounting in unauthenticated mode
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.138582] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 203
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.180464] UBIFS (ubi0:1): recovery needed
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.296150] UBIFS (ubi0:1): recovery completed
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.296234] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.299534] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.307387] UBIFS (ubi0:1): FS size: 194400256 bytes (185 MiB, 1531 LEBs), max 1543 LEBs, journal size 9777152 bytes (9 MiB, 77 LEBs)
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.317340] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.329304] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID CD4BCD73-6290-4581-9550-941FEB3AD797, small LPT model
Sun Nov  2 06:57:26 2025 user.info kernel: [   12.337380] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Sun Nov  2 06:57:26 2025 user.info kernel: [   12.353948] block: extroot: not configured
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.354094] UBIFS (ubi0:1): un-mount UBI device 0
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.358197] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.369003] UBIFS (ubi0:1): Mounting in unauthenticated mode
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.378650] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 204
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.472102] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.472134] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.478980] UBIFS (ubi0:1): FS size: 194400256 bytes (185 MiB, 1531 LEBs), max 1543 LEBs, journal size 9777152 bytes (9 MiB, 77 LEBs)
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.488878] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Sun Nov  2 06:57:26 2025 kern.notice kernel: [   12.500843] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID CD4BCD73-6290-4581-9550-941FEB3AD797, small LPT model
Sun Nov  2 06:57:26 2025 user.info kernel: [   12.531422] block: attempting to load /tmp/overlay/upper/etc/config/fstab
Sun Nov  2 06:57:26 2025 user.info kernel: [   12.536946] block: extroot: not configured
Sun Nov  2 06:57:26 2025 user.info kernel: [   12.539338] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Sun Nov  2 06:57:26 2025 user.info kernel: [   12.541424] block: extroot: not configured
Sun Nov  2 06:57:26 2025 user.info kernel: [   12.550134] mount_root: switching to ubifs overlay
Sun Nov  2 06:57:26 2025 user.warn kernel: [   12.564217] urandom-seed: Seeding with /etc/urandom.seed
Sun Nov  2 06:57:26 2025 user.info kernel: [   12.624522] procd: - early -
Sun Nov  2 06:57:26 2025 user.info kernel: [   12.624631] procd: - watchdog -
Sun Nov  2 06:57:26 2025 user.info kernel: [   12.626621] procd: Watchdog has previously reset the system
Sun Nov  2 06:57:26 2025 user.info kernel: [   13.188551] procd: - watchdog -
Sun Nov  2 06:57:26 2025 user.info kernel: [   13.188635] procd: Watchdog has previously reset the system
Sun Nov  2 06:57:26 2025 user.info kernel: [   13.192317] procd: - ubus -
Sun Nov  2 06:57:26 2025 user.info kernel: [   13.355740] procd: - init -
Sun Nov  2 06:57:26 2025 user.info kernel: [   13.885845] kmodloader: loading kernel modules from /etc/modules.d/*
Sun Nov  2 06:57:26 2025 kern.info kernel: [   13.941499] OpenVPN data channel offload (ovpn-dco) 2.0.0 -- (C) 2020-2023 OpenVPN, Inc.
Sun Nov  2 06:57:26 2025 kern.info kernel: [   13.943494] tun: Universal TUN/TAP device driver, 1.6
Sun Nov  2 06:57:26 2025 kern.info kernel: [   13.963912] ntfs3: Enabled Linux POSIX ACLs support
Sun Nov  2 06:57:26 2025 kern.info kernel: [   13.980948] usbcore: registered new interface driver cdc_acm
Sun Nov  2 06:57:26 2025 kern.info kernel: [   13.980981] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Sun Nov  2 06:57:26 2025 kern.info kernel: [   13.986505] usbcore: registered new interface driver cdc_wdm
Sun Nov  2 06:57:26 2025 kern.info kernel: [   13.999039] Loading modules backported from Linux version v6.12.44-0-g11a24528d080
Sun Nov  2 06:57:26 2025 kern.info kernel: [   13.999308] Backport generated by backports.git v6.1.110-1-35-g410656ef
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.016920] usbcore: registered new interface driver usblp
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.019722] usbcore: registered new interface driver usbserial_generic
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.021334] usbserial: USB Serial support registered for generic
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.029908] usbcore: registered new interface driver cdc_ether
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.035606] usbcore: registered new interface driver cdc_ncm
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.080228] usbcore: registered new interface driver huawei_cdc_ncm
Sun Nov  2 06:57:26 2025 user.info kernel: [   14.174016] urngd: v1.0.2 started.
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.182363] PPP generic driver version 2.4.2
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.183036] NET: Registered PF_PPPOX protocol family
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.186470] usbcore: registered new interface driver qmi_wwan
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.192922] usbcore: registered new interface driver rndis_host
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.197017] usbcore: registered new interface driver sierra
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.202134] usbserial: USB Serial support registered for Sierra USB modem
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.210716] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.214525] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   14.267209] ath10k_pci 0000:01:00.0: assign IRQ: got 32
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.267240] ath10k 6.10 driver, optimized for CT firmware, probing pci device: 0x46.
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.279657] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   14.279758] ath10k_pci 0000:01:00.0: enabling bus mastering
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   14.280188] qcom-pcie 1b500000.pci: msi#1 address_hi 0x0 address_lo 0x43ac9000
Sun Nov  2 06:57:26 2025 kern.info kernel: [   14.280347] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Sun Nov  2 06:57:26 2025 kern.info kernel: [   15.155126] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
Sun Nov  2 06:57:26 2025 kern.info kernel: [   15.155177] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Sun Nov  2 06:57:26 2025 kern.info kernel: [   15.165674] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9984-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 7ea63dc5
Sun Nov  2 06:57:26 2025 kern.info kernel: [   17.507575] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 0bfe5c35
Sun Nov  2 06:57:26 2025 kern.warn kernel: [   21.057746] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
Sun Nov  2 06:57:26 2025 kern.warn kernel: [   21.057818] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
Sun Nov  2 06:57:26 2025 kern.info kernel: [   21.139812] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
Sun Nov  2 06:57:26 2025 kern.info kernel: [   21.140635] ath10k_pci 0000:01:00.0: wmi print 'free: 84920 iram: 13156 sram: 11224'
Sun Nov  2 06:57:26 2025 kern.info kernel: [   21.431563] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-nvmem max-sta 32 raw 0 hwcrypto 1
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   21.512159] ath: EEPROM regdomain: 0x0
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   21.512171] ath: EEPROM indicates default country code should be used
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   21.512176] ath: doing EEPROM country->regdmn map search
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   21.512184] ath: country maps to regdmn code: 0x3a
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   21.512190] ath: Country alpha2 being used: US
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   21.512195] ath: Regpair used: 0x3a
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   21.558818] ath10k_pci 0001:01:00.0: assign IRQ: got 34
Sun Nov  2 06:57:26 2025 kern.info kernel: [   21.558851] ath10k 6.10 driver, optimized for CT firmware, probing pci device: 0x46.
Sun Nov  2 06:57:26 2025 kern.info kernel: [   21.559357] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   21.565729] ath10k_pci 0001:01:00.0: enabling bus mastering
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   21.566213] qcom-pcie 1b700000.pci: msi#1 address_hi 0x0 address_lo 0x43bc6000
Sun Nov  2 06:57:26 2025 kern.info kernel: [   21.566382] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Sun Nov  2 06:57:26 2025 kern.info kernel: [   22.025944] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
Sun Nov  2 06:57:26 2025 kern.info kernel: [   22.026000] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Sun Nov  2 06:57:26 2025 kern.info kernel: [   22.036727] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9984-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 7ea63dc5
Sun Nov  2 06:57:26 2025 kern.info kernel: [   24.361020] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 0bfe5c35
Sun Nov  2 06:57:26 2025 kern.warn kernel: [   27.912677] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
Sun Nov  2 06:57:26 2025 kern.warn kernel: [   27.912721] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
Sun Nov  2 06:57:26 2025 kern.info kernel: [   27.996755] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
Sun Nov  2 06:57:26 2025 kern.info kernel: [   27.997609] ath10k_pci 0001:01:00.0: wmi print 'free: 84920 iram: 13156 sram: 11224'
Sun Nov  2 06:57:26 2025 kern.info kernel: [   28.476104] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-nvmem max-sta 32 raw 0 hwcrypto 1
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   28.562108] ath: EEPROM regdomain: 0x0
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   28.562120] ath: EEPROM indicates default country code should be used
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   28.562124] ath: doing EEPROM country->regdmn map search
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   28.562132] ath: country maps to regdmn code: 0x3a
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   28.562138] ath: Country alpha2 being used: US
Sun Nov  2 06:57:26 2025 kern.debug kernel: [   28.562143] ath: Regpair used: 0x3a
Sun Nov  2 06:57:26 2025 kern.info kernel: [   28.600191] usbcore: registered new interface driver cdc_mbim
Sun Nov  2 06:57:26 2025 kern.info kernel: [   28.602046] usbcore: registered new interface driver option
Sun Nov  2 06:57:26 2025 kern.info kernel: [   28.605000] usbserial: USB Serial support registered for GSM modem (1-port)
Sun Nov  2 06:57:26 2025 kern.info kernel: [   28.612420] usbcore: registered new interface driver qcserial
Sun Nov  2 06:57:26 2025 kern.info kernel: [   28.617318] usbserial: USB Serial support registered for Qualcomm USB modem
Sun Nov  2 06:57:26 2025 user.info kernel: [   28.623514] kmodloader: done loading kernel modules from /etc/modules.d/*
Sun Nov  2 06:57:26 2025 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Sun Nov  2 06:57:26 2025 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Sun Nov  2 06:57:26 2025 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Sun Nov  2 06:57:26 2025 daemon.info dnsmasq[1]: started, version 2.90 cachesize 1000
Sun Nov  2 06:57:26 2025 daemon.info dnsmasq[1]: DNS service limited to local subnets
Sun Nov  2 06:57:26 2025 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Sun Nov  2 06:57:26 2025 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Sun Nov  2 06:57:26 2025 daemon.info dnsmasq[1]: using only locally-known addresses for test
Sun Nov  2 06:57:26 2025 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Sun Nov  2 06:57:26 2025 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Sun Nov  2 06:57:26 2025 daemon.info dnsmasq[1]: using only locally-known addresses for local
Sun Nov  2 06:57:26 2025 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Sun Nov  2 06:57:26 2025 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Sun Nov  2 06:57:26 2025 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Sun Nov  2 06:57:26 2025 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Sun Nov  2 06:57:26 2025 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Sun Nov  2 06:57:26 2025 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 names

516 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,913

Odp: Zmiany w wydaniu OpenWrt 24.10

Wiec co, zmieniają ci się identyfiakatory na magistrali pci że tak to lata?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

517 Odpowiedź przez Cybe

  • Cybe
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2020-06-23
  • Posty: 494

Odp: Zmiany w wydaniu OpenWrt 24.10

No nie mam właśnie pojęcia co zrobić.

518 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,913

Odp: Zmiany w wydaniu OpenWrt 24.10

Wgraj openwrt z openwrt.org, najlepiej wersję rozwojową, sprawdź czy radia po restarcie się zamieniają, jak tak - zgłaszaj błąd.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

519 Odpowiedź przez krisux

  • krisux
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-01-10
  • Posty: 103

Odp: Zmiany w wydaniu OpenWrt 24.10

przejdzie aktualizacja z zachowaniem ustawień z 23.05?

520 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,913

Odp: Zmiany w wydaniu OpenWrt 24.10

Raczej nie zachowuj konfiguracji.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

521 Odpowiedź przez krisux

  • krisux
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-01-10
  • Posty: 103

Odp: Zmiany w wydaniu OpenWrt 24.10

Cezary napisał/a:

Raczej nie zachowuj konfiguracji.

Mam już ponad 1000 linijek uci, a przepisuję tylko aktywne usługi... hmm

Nie ma skryptów by przepisać konfigurację na uci? Choćby te podstawy network, dhcp, firewall, wireless?

522 Odpowiedź przez Cezary (edytowany przez Cezary 2025-11-12 20:18:08)

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,913

Odp: Zmiany w wydaniu OpenWrt 24.10

Nie ma i nigdy nie było *. Ty musisz wiedzieć co się zmieniło pomiędzy wersjami i co możesz zachować a co musisz przepisać.

*) w uci-default jest kilka podstawowych konwerterów, ale to jest minimalna ilość.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

523 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,913

Odp: Zmiany w wydaniu OpenWrt 24.10

Królik napisał/a:

@Cezary

Dorzuciłbyś do 24.10 w kolejnym buildzie mojego cudaka?

https://github.com/openwrt/openwrt/pull/20287

Dodałem. Jest wraz z wczorajszymi buildami. Jedyna zmiana jaką  wykonałem to zmiana #include "mt7981b.dtsi" na #include "mt7981.dtsi" jako że w 24.10 nie jest to jeszcze rozróżniane. Mam nadzieję że nadal działa.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

524 Odpowiedź przez Królik

  • Skąd: Warszawa
  • Zarejestrowany: 2015-07-10
  • Posty: 1,106

Odp: Zmiany w wydaniu OpenWrt 24.10

Cezary napisał/a:
Królik napisał/a:

@Cezary

Dorzuciłbyś do 24.10 w kolejnym buildzie mojego cudaka?

https://github.com/openwrt/openwrt/pull/20287

Dodałem. Jest wraz z wczorajszymi buildami. Jedyna zmiana jaką  wykonałem to zmiana #include "mt7981b.dtsi" na #include "mt7981.dtsi" jako że w 24.10 nie jest to jeszcze rozróżniane. Mam nadzieję że nadal działa.

Wszystko działa jak należy. Dzięki.

Mam i używam: Fujitsu Futro S720, Netgear R6220, Unielec U7621-06, TP-Linki 1043 V1, V2, Linksysy EA7500v2, AeroHive AP350, Linksys EA8500, ZTE MF286d.
Mam: D-Linki DWR-921, DWR-118, DWR-116, TP-Link WDR-4900 v1, Checkpoint L-50, Linksysy 1900ACS, LB-Link BL-W1200,

Królik's Strona

525 Odpowiedź przez dzyndzla

  • Skąd: krk
  • Zarejestrowany: 2015-12-11
  • Posty: 55

Odp: Zmiany w wydaniu OpenWrt 24.10

Heja,
po aktualizacji do najnowszego snapshota, wifi na Linksysie MR8300, szczególnie 2.4 stało się nieużywalne, transmisja na poziomie 20-50 Mbit/s i rwanie połączenia. Zmieniłem ath10k-firmware-qca4019-ct ath10k-firmware-qca9888-ct kmod-ath10k-ct na wersje nie ct i wifi dostało nowe życie,  nigdy takiej stabilności transmisji i wydajności połączenia na openwrt nie widziałem. Zasadniczo maks kart sieciowych non stop. Na starym snapshocie takich problemów nie ma, ale performace wifi jest gorszy.
Przeglądałem commity do ipq40xx, ale nic szczególnego tam nie wyłapałem:
https://github.com/openwrt/openwrt/pull … s%3Aclosed
Skąd takie zachowanie zatem?

Linksys MR8300 V1.1 / Linksys WRT1200AC V2 / TP-Link Archer C7 V5