[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.60 (ycore@ycore-70TUA000CN) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 unknown) ) #497 SMP PREEMPT Thu Jul 29 14:50:45 CST 2021
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] Ignoring memory range 0x40000000 - 0x41000000
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: OVERLAP DETECTED!
[    0.000000] wifi_dump@51000000 (0x0000000051000000--0x0000000051600000) overlaps with wigig_dump@51200000 (0x0000000051200000--0x0000000051600000)
[    0.000000] On node 0 totalpages: 228864
[    0.000000]   DMA zone: 3576 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 228864 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc03ef4f000 s20864 r8192 d32384 u61440
[    0.000000] pcpu-alloc: s20864 r8192 d32384 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 225288
[    0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait swiotlb=1 coherent_pool=2M
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] software IO TLB [mem 0x7fe07000-0x7fe47000] (0MB) mapped at [ffffffc03ee07000-ffffffc03ee46fff]
[    0.000000] Memory: 887440K/915456K available (5404K kernel code, 621K rwdata, 2296K rodata, 232K init, 328K bss, 28016K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0040000 - 0xffffffbdc1000000   (    15 MB actual)
[    0.000000]     fixed   : 0xffffffbffa7fd000 - 0xffffffbffac00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16 MB)
[    0.000000]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc03f000000   (  1008 MB)
[    0.000000]       .init : 0xffffffc000807000 - 0xffffffc000841000   (   232 KB)
[    0.000000]       .text : 0xffffffc000080000 - 0xffffffc000807000   (  7708 KB)
[    0.000000]       .data : 0xffffffc000850000 - 0xffffffc0008eb400   (   621 KB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 64.
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000477] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000489] pid_max: default: 32768 minimum: 301
[    0.000585] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000595] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.001140] Initializing cgroup subsys io
[    0.001157] Initializing cgroup subsys memory
[    0.001183] Initializing cgroup subsys devices
[    0.001194] Initializing cgroup subsys freezer
[    0.001205] Initializing cgroup subsys net_cls
[    0.001215] Initializing cgroup subsys pids
[    0.001459] EFI services will not be available.
[    0.001482] ASID allocator initialised with 65536 entries
[    0.051982] MSM Memory Dump base table set up
[    0.052002] MSM Memory Dump apps data table set up
[    0.090088] Detected VIPT I-cache on CPU1
[    0.090134] CPU1: Booted secondary processor [410fd034]
[    0.120077] Detected VIPT I-cache on CPU2
[    0.120106] CPU2: Booted secondary processor [410fd034]
[    0.150103] Detected VIPT I-cache on CPU3
[    0.150131] CPU3: Booted secondary processor [410fd034]
[    0.150184] Brought up 4 CPUs
[    0.150210] SMP: Total of 4 processors activated.
[    0.150220] CPU: All CPU(s) started at EL1
[    0.150244] alternatives: patching kernel code
[    0.167100] DMI not present or invalid.
[    0.167348] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.167372] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.167741] pinctrl core: initialized pinctrl subsystem
[    0.168685] NET: Registered protocol family 16
[    0.190034] cpuidle: using governor ladder
[    0.220051] cpuidle: using governor menu
[    0.220216] vdso: 2 pages (1 code @ ffffffc000855000, 1 data @ ffffffc000854000)
[    0.220247] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.220895] DMA: preallocated 2048 KiB pool for atomic allocations
[    0.221038] CPU: IPQ8072A, SoC Version: 2.0
[    0.221071] <CORE> glink_init: IPC Logging Disabled
[    0.221525] IPC logging disabled
[    0.221531] IPC logging disabled
[    0.221536] IPC logging disabled
[    0.221540] IPC logging disabled
[    0.221545] IPC logging disabled
[    0.223530] gpiochip_add: registered GPIOs 0 to 69 on device: 1000000.pinctrl
[    0.223543] GPIO chip 1000000.pinctrl: created GPIO range 0->69 ==> 1000000.pinctrl PIN 0->69
[    0.224350] Soc version is not 1, changing clock offsets
[    0.233341] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
[    0.235643] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
[    0.237966] msm_rpm_dev_probe: APSS-RPM communication over GLINK
[    0.238904] sps:sps is ready.
[    0.244420] spmi spmi-0: PMIC Arb Version-2 (0x20010000)
[    0.250896] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[    0.251194] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2
[    0.281182] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixed-regulator@0[0]'
[    0.281914] pps_core: LinuxPPS API ver. 1 registered
[    0.281922] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.281946] PTP clock support registered
[    0.282101] dmi: Firmware registration failed.
[    0.283228] Advanced Linux Sound Architecture Driver Initialized.
[    0.283875] clocksource: Switched to clocksource arch_sys_counter
[    0.287033] NET: Registered protocol family 2
[    0.287660] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.287768] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.287953] TCP: Hash tables configured (established 8192 bind 8192)
[    0.288008] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.288045] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.288221] NET: Registered protocol family 1
[    0.288264] PCI: CLS 0 bytes, default 128
[    0.288987] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.296704] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.296720] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.300192] Key type asymmetric registered
[    0.300209] Asymmetric key parser 'x509' registered
[    0.300242] io scheduler noop registered
[    0.300255] io scheduler deadline registered (default)
[    0.302163] qcom-pcie 20000000.pci: GPIO lookup for consumer perst
[    0.302174] qcom-pcie 20000000.pci: using device tree for GPIO lookup
[    0.302187] of_get_named_gpiod_flags: can't parse 'perst-gpios' property of node '/soc/pci@20000000[0]'
[    0.302205] of_get_named_gpiod_flags: parsed 'perst-gpio' property of node '/soc/pci@20000000[0]' - status (0)
[    0.302342] 20000000.pci supply vdda not found, using dummy regulator
[    0.302391] 20000000.pci supply vdda_phy not found, using dummy regulator
[    0.302425] 20000000.pci supply vdda_refclk not found, using dummy regulator
[    0.302977] PCI host bridge /soc/pci@20000000 ranges:
[    0.303003]    IO 0x20200000..0x2020ffff -> 0x20200000
[    0.303018]   MEM 0x20220000..0x2fffffff -> 0x20220000
[    1.455536] qcom-pcie 20000000.pci: phy link never came up
[    1.457094] qcom-pcie 20000000.pci: hostinit failed
[    1.457103] qcom-pcie 20000000.pci: cannot initialize host
[    1.457253] qcom-pcie: probe of 20000000.pci failed with error -110
[    1.462736] NET: Registered protocol family 27
[    1.462749] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
[    1.462761] qmi_log_init: IPC Logging disabled
[    1.462767] qmi_log_init: IPC Logging disabled
[    1.462855] msm_rpm_log_probe: OK
[    1.463189] msm-dcc b3000.dcc: DCC XPU is not specified
[    1.463441] msm-dcc b3000.dcc: jiffies_64: 0xffff8b61, cntvct_64: 0x7e41ea3
[    1.463452] msm-dcc b3000.dcc: gcnt_hi: 0x00000000(0xffffff800058e004)
[    1.463463] msm-dcc b3000.dcc: gcnt_lo: 0x07e4206f(0xffffff800058e000)
[    1.464138] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set
[    1.465632] msm_serial 78b3000.serial: msm_serial: detected port #0
[    1.465669] msm_serial 78b3000.serial: uartclk = 3686400
[    1.465707] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 77, base_baud = 230400) is a MSM
[    1.465729] msm_serial: console setup on port #0
[    2.254524] console [ttyMSM0] enabled
[    2.259500] msm_serial 78b1000.serial: msm_serial: detected port #1
[    2.262773] msm_serial 78b1000.serial: uartclk = 19200000
[    2.268869] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 78, base_baud = 1200000) is a MSM
[    2.274737] msm_serial: driver initialized
[    2.283196] msm_serial_hsl_init: driver initialized
[    2.295814] brd: module loaded
[    2.296463] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    2.298495] ipq807x-pinctrl 1000000.pinctrl: pin GPIO_47 already requested by 78b1000.serial; cannot claim for 78b8000.spi
[    2.305034] ipq807x-pinctrl 1000000.pinctrl: pin-47 (78b8000.spi) status -22
[    2.315853] ipq807x-pinctrl 1000000.pinctrl: could not request pin 47 (GPIO_47) from group gpio47  on device 1000000.pinctrl
[    2.323031] spi_qup 78b8000.spi: Error applying setting, reverse things back
[    2.334327] spi_qup 78b8000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    2.342762] m25p80 spi32766.0: found mx25u6435f, expected n25q128a11
[    2.348305] m25p80 spi32766.0: mx25u6435f (8192 Kbytes)
[    2.354700] 19 ofpart partitions found on MTD device spi32766.0
[    2.359563] Creating 19 MTD partitions on "spi32766.0":
[    2.365480] 0x000000000000-0x000000050000 : "0:SBL1"
[    2.371348] 0x000000050000-0x000000060000 : "0:MIBIB"
[    2.376513] 0x000000060000-0x000000080000 : "0:BOOTCONFIG"
[    2.381475] 0x000000080000-0x0000000a0000 : "0:BOOTCONFIG1"
[    2.386840] 0x0000000a0000-0x000000220000 : "0:QSEE_1"
[    2.392291] 0x000000220000-0x0000003a0000 : "0:QSEE"
[    2.397505] 0x0000003a0000-0x0000003b0000 : "0:DEVCFG_1"
[    2.402611] 0x0000003b0000-0x0000003c0000 : "0:DEVCFG"
[    2.407930] 0x0000003c0000-0x0000003d0000 : "0:APDP"
[    2.412851] 0x0000003d0000-0x0000003e0000 : "0:APDP_1"
[    2.417993] 0x0000003e0000-0x000000420000 : "0:RPM_1"
[    2.422957] 0x000000420000-0x000000460000 : "0:RPM"
[    2.428069] 0x000000460000-0x000000470000 : "0:CDT_1"
[    2.432744] 0x000000470000-0x000000480000 : "0:CDT"
[    2.437959] 0x000000480000-0x000000490000 : "0:APPSBLENV"
[    2.442655] 0x000000490000-0x000000530000 : "0:APPSBL_1"
[    2.448202] 0x000000530000-0x0000005d0000 : "0:APPSBL"
[    2.453572] 0x0000005d0000-0x000000610000 : "0:ART"
[    2.458534] 0x000000610000-0x000000690000 : "0:ETHPHYFW"
[    2.464545] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xa1
[    2.468245] nand: ONFI 10-Compliant Macronix MX30UF1G18AC
[    2.474596] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    2.479912] 4 ofpart partitions found on MTD device qcom_nand.0
[    2.487353] Creating 4 MTD partitions on "qcom_nand.0":
[    2.493157] 0x000000000000-0x000003400000 : "rootfs_1"
[    2.537193] 0x000003400000-0x000003c00000 : "0:WIFIFW_1"
[    2.543734] 0x000003c00000-0x000007000000 : "rootfs"
[    2.582174] mtd: device 21 (rootfs) set to be root filesystem
[    2.582431] mtdsplit: no squashfs found in "rootfs"
[    2.586913] 0x000007000000-0x000007800000 : "0:WIFIFW"
[    2.598809] libphy: Fixed MDIO Bus: probed
[    2.599481] of_get_named_gpiod_flags: parsed 'phy-reset-gpio' property of node '/soc/mdio@90000[0]' - status (0)
[    2.819547] of_get_named_gpiod_flags: parsed 'phy-reset-gpio' property of node '/soc/mdio@90000[1]' - status (0)
[    3.039602] of_get_named_gpiod_flags: parsed 'phy-reset-gpio' property of node '/soc/mdio@90000[2]' - status (0)
[    3.259750] libphy: qca_mdio: probed
[    3.260481] qca-mdio 90000.mdio: qca-mdio driver was registered
[    3.262575] Unable to create IPC log context!
[    3.268350] cnss: Platform driver probed successfully.
[    3.272767] Skip QCA8074V1 in V2 platform
[    3.277735] cnss_genl: genl_register_family fail: -17
[    3.281651] cnss: CNSS genl init failed -17
[    3.286723] cnss: Platform driver probed successfully.
[    3.290831] i2c /dev entries driver
[    3.302776] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    3.303244] sdhci: Secure Digital Host Controller Interface driver
[    3.310344] sdhci: Copyright(c) Pierre Ossman
[    3.316281] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.321411] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
[    3.326492] ICE IRQ = 82
[    3.335023] 
[    3.335023] Version Rollback Feature Disabled
[    3.337800] DEV CI test message
[    3.343331] subsys-restart: ssr_parse_restart_orders(): q6v5_m3 device has been added to q6v5-m3's restart group
[    3.345985] subsys-restart: ssr_parse_restart_orders(): q6v5_wcss device has been added to q6v5-m3's restart group
[    3.356461] remoteproc remoteproc0: q6v5-m3 is available
[    3.366836] SPMI VADC - Min ch: 0 Max ch: 15
[    3.373728] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000
[    3.376339] coresight-csr 6001000.csr: CSR initialized
[    3.383770] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000
[    3.388749] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000
[    3.396294] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000
[    3.403647] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000
[    3.411044] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000
[    3.418426] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000
[    3.425805] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000
[    3.433162] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000
[    3.440559] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000
[    3.447936] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000
[    3.455319] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000
[    3.462677] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000
[    3.470069] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000
[    3.477447] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000
[    3.484831] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000
[    3.492190] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000
[    3.499585] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000
[    3.507123] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000
[    3.514471] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000
[    3.521872] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000
[    3.529306] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000
[    3.536673] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006044000
[    3.543702] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006044000
[    3.560810] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006044000
[    3.576694] sps:BAM 0x0000000006044000 is registered.<6>[    3.584330] coresight-tmc 6028000.tmc: TMC initialized
[    3.589122] coresight-tmc 6027000.tmc: TMC initialized
[    3.594292] coresight-funnel 6021000.funnel: FUNNEL initialized
[    3.599304] coresight-funnel 6100000.funnel: FUNNEL initialized
[    3.605139] coresight-funnel 6120000.funnel: FUNNEL initialized
[    3.611019] coresight-funnel 6130000.funnel: FUNNEL initialized
[    3.616955] coresight-funnel 61a1000.funnel: FUNNEL initialized
[    3.623373] coresight-etm4x 619c000.etm: ETM 4.0 initialized
[    3.629086] coresight-etm4x 619d000.etm: ETM 4.0 initialized
[    3.635017] coresight-etm4x 619e000.etm: ETM 4.0 initialized
[    3.640694] coresight-etm4x 619f000.etm: ETM 4.0 initialized
[    3.645962] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized
[    3.651693] coresight-stm 6002000.stm: STM initialized
[    3.660270] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000
[    3.664128] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
[    3.675337] NET: Registered protocol family 10
[    3.680078] NET: Registered protocol family 17
[    3.683574] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    3.688029] Bridge firewalling registered
[    3.700740] 8021q: 802.1Q VLAN Support v1.8
[    3.706203] <CORE> glink_core_register_transport: IPC Logging disabled
[    3.708733] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[    3.715252] msm_glink_smem_native_xprt    rx fifo not found
[    3.722596] pmd9655_s3: supplied by e-smps1-reg
[    3.728172] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[    3.732238] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
[    3.738869] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[    3.746513] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[    3.754022] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[    3.763143] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      SVS: open-loop= 704000 uV
[    3.770103] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      NOM: open-loop= 824000 uV
[    3.780085] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused    TURBO: open-loop= 880000 uV
[    3.789894] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused   STURBO: open-loop= 960000 uV
[    3.799761] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      SVS: quot[ 7]= 729, quot_offset[ 7]=   0
[    3.809516] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      NOM: quot[ 7]= 949, quot_offset[ 7]= 220
[    3.820365] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused    TURBO: quot[ 7]=1039, quot_offset[ 7]=  90
[    3.831309] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused   STURBO: quot[ 7]=1181, quot_offset[ 7]= 140
[    3.842360] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[    3.853684] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2
[    3.860023] pmd9655_s4: supplied by e-smps1-reg
[    3.867202] cpr3_mem_acc_init: npu: not using memory accelerator regulator
[    3.871475] npu_corner: fused      NOM: open-loop= 784000 uV
[    3.878430] npu_corner: fused    TURBO: open-loop= 848000 uV
[    3.884282] npu_corner: fused      NOM: open-loop= 784000 uV
[    3.889874] npu_corner: fused    TURBO: open-loop= 848000 uV
[    3.895550] npu_corner: Normal and Cold condition init done. Default to normal.
[    3.902255] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 800000 KHz
[    3.908373] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1017600 KHz
[    3.915773] DEV CI test message
[    3.924482] remoteproc remoteproc1: q6v5-wcss is available
[    3.927269] ubi0: attaching mtd21
[    4.126930] ubi0: scanning is finished
[    4.131729] ubi0: attached mtd21 (name "rootfs", size 52 MiB)
[    4.131747] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.136449] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    4.143212] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.150074] ubi0: good PEBs: 416, bad PEBs: 0, corrupted PEBs: 0
[    4.156843] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[    4.163091] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1564983977
[    4.170130] ubi0: available PEBs: 0, total reserved PEBs: 416, PEBs reserved for bad PEB handling: 20
[    4.179424] ubi0: background thread "ubi_bgt0d" started, PID 123
[    4.199302] hctosys: unable to open rtc device (rtc0)
[    4.204165] pmd9655_ldo11: disabling
[    4.204636] ALSA device list:
[    4.206958]   No soundcards found.
[    4.211421] VFS: Mounted root (squashfs filesystem) readonly on device 31:24.
[    4.213206] Freeing unused kernel memory: 232K (ffffffc000807000 - ffffffc000841000)
[    4.220387] Freeing alternatives memory: 44K (ffffffc000841000 - ffffffc00084c000)
[    4.340680] random: nonblocking pool is initialized
[    4.457022] init: Console is alive
[    4.457119] init: - watchdog -
[    5.195814] Button Hotplug driver version 0.4.1
[    5.196380] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/gpio_keys/button@1[0]' - status (0)
[    5.198205] SCSI subsystem initialized
[    5.200891] libata version 3.00 loaded.
[    5.204140] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/soc/leds/led_2g[0]'
[    5.204153] of_get_named_gpiod_flags: parsed 'gpio' property of node '/soc/leds/led_2g[0]' - status (0)
[    5.204214] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/soc/leds/led_5g[0]'
[    5.204219] of_get_named_gpiod_flags: parsed 'gpio' property of node '/soc/leds/led_5g[0]' - status (0)
[    5.204254] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/soc/leds/led_sys[0]'
[    5.204259] of_get_named_gpiod_flags: parsed 'gpio' property of node '/soc/leds/led_sys[0]' - status (0)
[    5.459668] init: - preinit -
[    7.597650] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 159
[    7.622355] UBIFS (ubi0:2): recovery needed
[    7.708088] UBIFS (ubi0:2): recovery completed
[    7.708135] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[    7.711416] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    7.719329] UBIFS (ubi0:2): FS size: 21331968 bytes (20 MiB, 168 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
[    7.729220] UBIFS (ubi0:2): reserved for root: 1007561 bytes (983 KiB)
[    7.739459] UBIFS (ubi0:2): media format: w4/r0 (latest is w4/r0), UUID 1B72983D-9124-4EBE-AE19-4152AF6BDF4E, small LPT model
[    7.748213] mount_root: switching to jffs2 overlay
[    8.052624] procd: - early -
[    8.057502] procd: - watchdog -
[    8.657233] procd: - ubus -
[    9.659707] procd: - init -
[    9.860581] ubi1: attaching mtd22
[    9.890802] ubi1: scanning is finished
[    9.895475] ubi1: attached mtd22 (name "0:WIFIFW", size 8 MiB)
[    9.895493] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    9.900187] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    9.907059] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[    9.913912] ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
[    9.920672] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[    9.926587] ubi1: max/mean erase counter: 0/0, WL threshold: 4096, image sequence number: 772228311
[    9.933881] ubi1: available PEBs: 22, total reserved PEBs: 42, PEBs reserved for bad PEB handling: 20
[    9.942820] ubi1: background thread "ubi_bgt1d" started, PID 576
[   10.394489] NET: Registered protocol family 8
[   10.394512] NET: Registered protocol family 20
[   10.405373] cfg80211: World regulatory domain updated:
[   10.405402] cfg80211:  DFS Master region: unset
[   10.409396] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   10.414064] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.423558] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   10.425033] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[   10.427559] Initializing XFRM netlink socket
[   10.427995] NET: Registered protocol family 15
[   10.450312] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   10.454470] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   10.462362] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   10.472123] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   10.481555] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   10.489646] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   10.554187] ssdk_switch_device_num_init[998]:INFO:ess-switch dts node number: 1
[   10.557884] ssdk_dt_get_switch_node[836]:INFO:ess-switch DT exist!
[   10.564812] ssdk_dt_parse_access_mode[737]:INFO:switch_access_mode: local bus
[   10.570962] ssdk_dt_parse_access_mode[750]:INFO:switchreg_base_addr: 0x3a000000
[   10.578084] ssdk_dt_parse_access_mode[751]:INFO:switchreg_size: 0x1000000
[   10.585377] ssdk_dt_parse_mac_mode[242]:INFO:mac mode = 0x0
[   10.591791] ssdk_dt_parse_mac_mode[251]:INFO:mac mode1 = 0xf
[   10.597351] ssdk_dt_parse_mac_mode[260]:INFO:mac mode2 = 0xf
[   10.603002] ssdk_dt_parse_phy_info[569]:INFO:[PORT 5] port_mac_sel = QGMAC_PORT
[   10.608639] ssdk_dt_parse_phy_info[569]:INFO:[PORT 6] port_mac_sel = QGMAC_PORT
[   10.615944] ssdk_dt_parse_uniphy[279]:INFO:ess-uniphy DT exist!
[   10.623301] ssdk_dt_parse_intf_mac[683]:INFO:dp1 MAC 44:d1:fa:ac:8b:55
[   10.629137] ssdk_dt_parse_intf_mac[683]:INFO:dp2 MAC 44:d1:fa:ac:8b:56
[   10.635734] ssdk_plat_init start
[   10.715264] ssdk_ppe_clock_init[517]:INFO:ppe and uniphy clock init successfully!
[   10.718395] ssdk_probe[1912]:INFO:ess_rst doesn't exist!
[   10.725529] HPPE initializing...
[   10.726897] ssdk_phy_driver_init[300]:INFO:dev_id = 0, phy_adress = 0, phy_id = 0xffffffff phytype doesn't match
[   10.734281] ssdk_phy_driver_init[300]:INFO:dev_id = 0, phy_adress = 1, phy_id = 0xffffffff phytype doesn't match
[   10.744420] ssdk_phy_driver_init[300]:INFO:dev_id = 0, phy_adress = 2, phy_id = 0xffffffff phytype doesn't match
[   10.754565] ssdk_phy_driver_init[300]:INFO:dev_id = 0, phy_adress = 3, phy_id = 0xffffffff phytype doesn't match
[   10.764753] qca808x_phy_api_ops_init[2125]:INFO:qca probe qca808x phy driver succeeded!
[   10.776631] qca808x_ptp_register[1410]:INFO:qca808x ptp clock registered
[   10.782900] qca808x_ptp_register[1410]:INFO:qca808x ptp clock registered
[   10.789525] regi_init[3359]:INFO:Initializing HPPE!!
[   11.013869] ssdk_ppe_reset_init[798]:INFO:ppe reset successfully!
[   11.020585] qca_hppe_tdm_hw_init[737]:INFO:tdm setup num=96
[   11.023913] qca_hppe_portctrl_hw_init[165]:INFO:Hawkeye PPE port initializing
[   13.401927] ssdk_switch_register[1617]:INFO:Chip version 0x1500
[   13.404909] qca_link_polling_select[1279]:INFO:link-polling-required node does not exist
[   13.411146] ssdk_switch_register[1642]:INFO:polling is selected
[   13.418870] regi_init[3363]:INFO:Initializing HPPE Done!!
[   13.423782] regi_init[3407]:INFO:qca-ssdk module init succeeded!
[   13.433080] tun: Universal TUN/TAP device driver, 1.6
[   13.433102] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   13.439262] EDMA ver 1 hw init
[   13.443484] EDMA HW Reset completed succesfully
[   13.446369] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
[   13.450733] RxDesc:1 (15-15) RxFill:1 (7-7)
[   13.859260] **********************************************************
[   13.859285] * NSS Data Plane driver
[   13.864683] **********************************************************
[   13.874693] l2tp_core: L2TP core driver, V2.0
[   13.875125] l2tp_netlink: L2TP netlink interface
[   13.988439] nss_driver - fw of size 688796  bytes copied to load addr: 40000000, nss_id : 0
[   13.990015] Supported Frequencies - 
[   13.995615] 748.8 MHz 1.4976 GHz 
[   14.001566] 1.6896 GHz <1>[   14.002609] 
[   14.005048] ffffffbffc6b0d00: meminfo init succeed
[   14.035084] node size 2 # items 4
[   14.035106] memory: 40000000 1073741824 (avl 932093952) items 4 active_cores 2
[   14.037433] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000
[   14.044527] ffffffbffc6b0d00: nss core 0 booted successfully
[   14.052110] nss_driver - fw of size 287948  bytes copied to load addr: 40800000, nss_id : 1
[   14.058055] Supported Frequencies - 
[   14.065245] 748.8 MHz 1.4976 GHz 
[   14.071214] 1.6896 GHz <1>[   14.072258] 
[   14.074692] ffffffbffc6b7f80: meminfo init succeed
[   14.077620] sit: IPv6 over IPv4 tunneling driver
[   14.079503] node size 2 # items 4
[   14.079507] memory: 40000000 1073741824 (avl 932110336) items 4 active_cores 2
[   14.079532] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000
[   14.079541] ffffffbffc6b7f80: nss core 1 booted successfully
[   14.104073] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded.
[   14.110440] gre: GRE over IPv4 demultiplexor driver
[   14.116977] ip_gre: GRE over IPv4 tunneling driver
[   14.122242] ip6_gre: GRE over IPv6 tunneling driver
[   14.127724] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[   14.133841] PPP generic driver version 2.4.2
[   14.138745] QCA multicast snooping installed successfully
[   14.143320] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.149925] rmnet_nss_init(): initializing rmnet_nss
[   14.154875] nf_conntrack version 0.5.0 (6935 buckets, 27740 max)
[   14.164523] nss_lag_init[354]:LAG Manager Installed
[   14.165799] NET: Registered protocol family 24
[   14.170457] PPTP driver version 0.8.5
[   14.175788] diag: IPC Logging disabled
[   14.188805] <NSS-CRYPTO>:module loaded Build_ID - 07/29/21, 14:45:12 SoC=ipq807x_64
[   14.190268] nss-macsec0 DT exist!
[   14.233202] nss-macsec1 DT exist!
[   14.270898] cannot find nss-macsec2 node
[   14.270913] nss_macsec init success
[   14.295106] u32 classifier
[   14.295123]     input device check on
[   14.296693]     Actions configured
[   14.300983] Mirror/redirect action on
[   14.311292] fuse init (API version 7.23)
[   14.313556] arp_tables: (C) 2002 David S. Miller
[   14.317420] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.321716] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   14.408189] nf_conntrack_rtsp v0.6.21 loading
[   14.496499] nf_nat_rtsp v0.6.21 loading
[   14.499072] Netfilter messages via NETLINK v0.30.
[   14.500159] PPP MPPE Compression module registered
[   14.521883] xt_time: kernel timezone is -0000
[   14.527820] ctnetlink v0.93: registering with nfnetlink.
[   15.718518] Not a bridge device, or device not found: br-lan
[   18.771277] configuring additional NSS pbufs
[   18.797647] additional pbufs of size 9003008 got added to NSS
[   18.822211] mem_manager: module license 'unspecified' taints kernel.
[   18.822236] Disabling lock debugging due to kernel taint
[   18.855889] qdf_dbg_mask value is invalid
[   18.855911] Using the default module debug levels instead
[   18.858872] qdf_print_ctrl_register: Allocated print control object 0
[   18.864338] 
[   18.864338]  MINIDUMP VA .bss start=ffffffbffcdb4200 module=qdf
[   19.178243] wlan: [1067:E:CONFIG] cfg_uint_item_handler: 142: allow_mon_vaps_in_sr=  - Invalid format (status 16); Using default 0
[   19.178331] wlan: [1067:E:CONFIG] cfg_uint_item_handler: 171: gScanProbeRepeatTime=50 - Out of range [0, 30]; Using 50
[   19.189139] 
[   19.189139]  MINIDUMP VA .bss start=ffffffbffd058580 module=umac
[   19.322289] 
[   19.322289]  MINIDUMP VA .bss start=ffffffbffd211e80 module=qca_ol<3>[   19.359724] wlan: [1071:I:ANY] =======ol_if_register_wifi3_0==========
[   19.359724] 
[   19.359759] wlan: [1071:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:ffffffbffd2f7578
[   19.366580] remoteproc remoteproc0: powering up q6v5-m3
[   19.383270] remoteproc remoteproc0: Booting fw image IPQ8074/m3_fw.mdt, size 284
[   19.383630] Sanity check passed for M3 image
[   19.423116] remoteproc remoteproc0: remote processor q6v5-m3 is now up
[   19.423190] wlan: [1071:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 2
[   19.428681] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done
[   19.435746] remoteproc remoteproc1: powering up q6v5-wcss
[   19.441382] remoteproc remoteproc1: Booting fw image IPQ8074/q6_fw.mdt, size 668
[   19.446929] Sanity check passed for the image
[   20.347532] glink_core_link_up glink is up
[   20.347697] glink_xprt_open_event
[   20.350532] Subsystem error monitoring/handling services are up
[   20.353928] remoteproc remoteproc1: remote processor q6v5-wcss is now up
[   20.354013] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
[   20.366623] wlan: [1071:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 3
[   20.464384] cnss: QMI WLFW service connected, state: 0x1
[   20.464798] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, ffffffbffc8ac1c8
[   20.469492] cnss: device_id : 65534 mem mode : [0]
[   20.483618] cnss: Boardid from dts:290,FW:ff
[   20.487866] cnss: BDF location : 0x000000004b0c0000
[   20.487890] cnss: BDF IPQ8074/bdwlan.b290 size 131072
[   20.492054] cnss: BDF download response , result: 0, err: 0x0
[   20.497279] cnss: per device BDF location : 0x000000004b0e0000
[   20.502762] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000
[   20.510543] cnss: BDF download response , result: 0, err: 0x0

(...) WLAN