nie chciałem spamować:
wrzucam cały. Może podpowiesz coś.
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.6.86 (cezary@eko.one.pl) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28010-49d8f4b833) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Sat Apr 26 18:53:51 2025
[ 0.000000] Machine model: Acer Predator Connect W6
[ 0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000
[ 0.000000] OF: reserved mem: 0x0000000043000000..0x000000004302ffff (192 KiB) nomap non-reusable secmon@43000000
[ 0.000000] OF: reserved mem: 0x000000004fc00000..0x000000004fcfffff (1024 KiB) nomap non-reusable wmcpu-reserved@4fc00000
[ 0.000000] OF: reserved mem: 0x000000004fd00000..0x000000004fd3ffff (256 KiB) nomap non-reusable wo-emi@4fd00000
[ 0.000000] OF: reserved mem: 0x000000004fd40000..0x000000004fd7ffff (256 KiB) nomap non-reusable wo-emi@4fd40000
[ 0.000000] OF: reserved mem: 0x000000004fd80000..0x000000004ffbffff (2304 KiB) nomap non-reusable wo-data@4fd80000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff]
[ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff]
[ 0.000000] node 0: [mem 0x0000000043030000-0x000000004fbfffff]
[ 0.000000] node 0: [mem 0x000000004fc00000-0x000000004ffbffff]
[ 0.000000] node 0: [mem 0x000000004ffc0000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 18 pages/cpu s35560 r8192 d29976 u73728
[ 0.000000] pcpu-alloc: s35560 r8192 d29976 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: rootfstype=squashfs,ext4 rootwait root=/dev/mmcblk0p6 fstools_ignore_partname=1 boot_param.boot_image_slot=1 boot_param.upgrade_image_slot=0 boot_param.dual_boot
[ 0.000000] Unknown kernel command line parameters "fstools_ignore_partname=1", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x000000007fb00000-0x000000007fc00000] (1MB)
[ 0.000000] Memory: 1010408K/1048576K available (9024K kernel code, 1000K rwdata, 1672K rodata, 448K init, 307K bss, 38168K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 640 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: 0xffffffc080010080
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
[ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
[ 0.000074] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
[ 0.000081] pid_max: default: 32768 minimum: 301
[ 0.002048] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.002056] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.003610] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.003993] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.004096] rcu: Hierarchical SRCU implementation.
[ 0.004098] rcu: Max phase no-delay instances is 1000.
[ 0.004414] smp: Bringing up secondary CPUs ...
[ 0.004672] Detected VIPT I-cache on CPU1
[ 0.004708] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
[ 0.004738] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.005033] Detected VIPT I-cache on CPU2
[ 0.005053] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000
[ 0.005064] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.005325] Detected VIPT I-cache on CPU3
[ 0.005342] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000
[ 0.005351] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.005378] smp: Brought up 1 node, 4 CPUs
[ 0.005382] SMP: Total of 4 processors activated.
[ 0.005385] CPU features: detected: 32-bit EL0 Support
[ 0.005387] CPU features: detected: CRC32 instructions
[ 0.005411] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.005414] CPU: All CPU(s) started at EL2
[ 0.005416] alternatives: applying system-wide alternatives
[ 0.008474] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.008489] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.009362] pinctrl core: initialized pinctrl subsystem
[ 0.010290] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.010562] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.010580] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.010595] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.010900] thermal_sys: Registered thermal governor 'fair_share'
[ 0.010902] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.010904] thermal_sys: Registered thermal governor 'step_wise'
[ 0.010906] thermal_sys: Registered thermal governor 'user_space'
[ 0.010969] ASID allocator initialised with 65536 entries
[ 0.011667] pstore: Using crash dump compression: deflate
[ 0.011671] pstore: Registered ramoops as persistent store backend
[ 0.011672] ramoops: using 0x10000@0x42ff0000, ecc: 0
[ 0.012691] /soc/interrupt-controller@c000000: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000
[ 0.017757] Modules: 29616 pages in range for non-PLT usage
[ 0.017766] Modules: 521136 pages in range for PLT usage
[ 0.018679] cryptd: max_cpu_qlen set to 1000
[ 0.019529] SCSI subsystem initialized
[ 0.019823] libata version 3.00 loaded.
[ 0.020918] clocksource: Switched to clocksource arch_sys_counter
[ 0.022529] NET: Registered PF_INET protocol family
[ 0.022621] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.023820] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.023831] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.023838] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.023874] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.024037] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.024289] MPTCP token hash table entries: 1024 (order: 2, 24576 bytes, linear)
[ 0.024368] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.024384] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.024619] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.024641] PCI: CLS 0 bytes, default 64
[ 0.025700] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.028946] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.028950] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.050440] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.051865] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges:
[ 0.051885] mtk-pcie-gen3 11280000.pcie: Parsing ranges property...
[ 0.051894] mtk-pcie-gen3 11280000.pcie: MEM 0x0020000000..0x002fffffff -> 0x0020000000
[ 0.052004] /soc/pcie@11280000: Failed to get clk index: 0 ret: -517
[ 0.052013] mtk-pcie-gen3 11280000.pcie: failed to get clocks
[ 0.054984] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.057870] printk: console [ttyS0] disabled
[ 0.078215] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 116, base_baud = 2500000) is a ST16650V2
[ 0.078251] printk: console [ttyS0] enabled
[ 0.921814] mtk_rng 1020f000.rng: registered RNG driver
[ 0.929854] loop: module loaded
[ 1.072201] mtk_soc_eth 15100000.ethernet: generated random MAC address 65:74:68:25:64:00
[ 1.080380] mtk_soc_eth 15100000.ethernet: generated random MAC address 65:74:68:25:64:00
[ 1.141003] Maxlinear Ethernet GPY211C mdio-bus:06: Firmware Version: 8.111 (0x886F)
[ 1.151228] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc081580000, irq 119
[ 1.161051] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc081580000, irq 119
[ 1.170727] i2c_dev: i2c /dev entries driver
[ 1.176898] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[ 1.185846] NET: Registered PF_INET6 protocol family
[ 1.191568] Segment Routing with IPv6
[ 1.195243] In-situ OAM (IOAM) with IPv6
[ 1.199194] NET: Registered PF_PACKET protocol family
[ 1.204260] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.217333] 8021q: 802.1Q VLAN Support v1.8
[ 1.235636] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges:
[ 1.242964] mtk-pcie-gen3 11280000.pcie: Parsing ranges property...
[ 1.249217] mtk-pcie-gen3 11280000.pcie: MEM 0x0020000000..0x002fffffff -> 0x0020000000
[ 1.257676] debugfs: File 'type' in directory 'phy-soc:t-phy@11c00000.0' already present!
[ 1.265836] debugfs: File 'efuse' in directory 'phy-soc:t-phy@11c00000.0' already present!
[ 1.274078] debugfs: File 'intr' in directory 'phy-soc:t-phy@11c00000.0' already present!
[ 1.282233] debugfs: File 'tx-imp' in directory 'phy-soc:t-phy@11c00000.0' already present!
[ 1.290558] debugfs: File 'rx-imp' in directory 'phy-soc:t-phy@11c00000.0' already present!
[ 1.309309] mtk-msdc 11230000.mmc: Final PAD_DS_TUNE: 0x14414
[ 1.315479] mmc0: new HS400 MMC card at address 0001
[ 1.321589] mmcblk0: mmc0:0001 004GA1 3.69 GiB
[ 1.327423] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 1.334814] GPT:1 != 7733247
[ 1.337679] GPT:Alternate GPT header not at the end of the disk.
[ 1.343667] GPT:1 != 7733247
[ 1.346531] GPT: Use GNU Parted to correct GPT errors.
[ 1.351750] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
[ 1.358931] mmcblk0boot0: mmc0:0001 004GA1 2.00 MiB
[ 1.364683] mmcblk0boot1: mmc0:0001 004GA1 2.00 MiB
[ 1.369796] mmcblk0rpmb: mmc0:0001 004GA1 512 KiB, chardev (250:0)
[ 1.543596] mtk-pcie-gen3 11280000.pcie: set MEM trans window[0]: cpu_addr = 0x20000000, pci_addr = 0x20000000, size = 0x10000000
[ 1.555536] mtk-pcie-gen3 11280000.pcie: PCI host bridge to bus 0000:00
[ 1.562140] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.567609] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
[ 1.574466] pci_bus 0000:00: scanning bus
[ 1.578483] pci 0000:00:00.0: [14c3:1f32] type 01 class 0x060400
[ 1.584489] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 1.591324] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.597401] pci 0000:00:00.0: PME# disabled
[ 1.602407] pci_bus 0000:00: fixups for bus
[ 1.606579] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 0
[ 1.613265] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.621257] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 1
[ 1.628000] pci_bus 0000:01: scanning bus
[ 1.632027] pci 0000:01:00.0: [14c3:7906] type 00 class 0x028000
[ 1.638040] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref]
[ 1.645261] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00007fff 64bit]
[ 1.652047] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref]
[ 1.659361] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.665445] pci 0000:01:00.0: PME# disabled
[ 1.690959] pci_bus 0000:01: fixups for bus
[ 1.695129] pci_bus 0000:01: bus scan returning with max=01
[ 1.700683] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.707287] pci_bus 0000:00: bus scan returning with max=01
[ 1.712858] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
[ 1.719627] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x202fffff 64bit pref]
[ 1.727351] pci 0000:00:00.0: BAR 0: assigned [mem 0x20300000-0x20307fff 64bit]
[ 1.734650] pci 0000:01:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff 64bit pref]
[ 1.742386] pci 0000:01:00.0: BAR 2: assigned [mem 0x20000000-0x20007fff 64bit]
[ 1.749686] pci 0000:01:00.0: BAR 4: assigned [mem 0x20200000-0x20200fff 64bit pref]
[ 1.757423] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.762374] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]
[ 1.769143] pci 0000:00:00.0: bridge window [mem 0x20100000-0x202fffff 64bit pref]
[ 1.776981] pcieport 0000:00:00.0: assign IRQ: got 126
[ 1.782111] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.788193] pcieport 0000:00:00.0: enabling bus mastering
[ 1.794096] mtk-pcie-gen3 11280000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11280c00 data 0
[ 1.802522] mtk-pcie-gen3 11280000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11280c00 data 1
[ 1.810943] mtk-pcie-gen3 11280000.pcie: msi#0x2 address_hi 0x0 address_lo 0x11280c00 data 2
[ 1.819358] mtk-pcie-gen3 11280000.pcie: msi#0x3 address_hi 0x0 address_lo 0x11280c00 data 3
[ 1.827775] mtk-pcie-gen3 11280000.pcie: msi#0x4 address_hi 0x0 address_lo 0x11280c00 data 4
[ 1.836192] mtk-pcie-gen3 11280000.pcie: msi#0x5 address_hi 0x0 address_lo 0x11280c00 data 5
[ 1.844610] mtk-pcie-gen3 11280000.pcie: msi#0x6 address_hi 0x0 address_lo 0x11280c00 data 6
[ 1.853026] mtk-pcie-gen3 11280000.pcie: msi#0x7 address_hi 0x0 address_lo 0x11280c00 data 7
[ 1.861444] mtk-pcie-gen3 11280000.pcie: msi#0x8 address_hi 0x0 address_lo 0x11280c00 data 8
[ 1.869858] mtk-pcie-gen3 11280000.pcie: msi#0x9 address_hi 0x0 address_lo 0x11280c00 data 9
[ 1.878275] mtk-pcie-gen3 11280000.pcie: msi#0xa address_hi 0x0 address_lo 0x11280c00 data 10
[ 1.886778] mtk-pcie-gen3 11280000.pcie: msi#0xb address_hi 0x0 address_lo 0x11280c00 data 11
[ 1.895282] mtk-pcie-gen3 11280000.pcie: msi#0xc address_hi 0x0 address_lo 0x11280c00 data 12
[ 1.903785] mtk-pcie-gen3 11280000.pcie: msi#0xd address_hi 0x0 address_lo 0x11280c00 data 13
[ 1.912289] mtk-pcie-gen3 11280000.pcie: msi#0xe address_hi 0x0 address_lo 0x11280c00 data 14
[ 1.920789] mtk-pcie-gen3 11280000.pcie: msi#0xf address_hi 0x0 address_lo 0x11280c00 data 15
[ 1.929293] mtk-pcie-gen3 11280000.pcie: msi#0x10 address_hi 0x0 address_lo 0x11280c00 data 16
[ 1.937886] mtk-pcie-gen3 11280000.pcie: msi#0x11 address_hi 0x0 address_lo 0x11280c00 data 17
[ 1.946477] mtk-pcie-gen3 11280000.pcie: msi#0x12 address_hi 0x0 address_lo 0x11280c00 data 18
[ 1.955068] mtk-pcie-gen3 11280000.pcie: msi#0x13 address_hi 0x0 address_lo 0x11280c00 data 19
[ 1.963658] mtk-pcie-gen3 11280000.pcie: msi#0x14 address_hi 0x0 address_lo 0x11280c00 data 20
[ 1.972249] mtk-pcie-gen3 11280000.pcie: msi#0x15 address_hi 0x0 address_lo 0x11280c00 data 21
[ 1.980836] mtk-pcie-gen3 11280000.pcie: msi#0x16 address_hi 0x0 address_lo 0x11280c00 data 22
[ 1.989426] mtk-pcie-gen3 11280000.pcie: msi#0x17 address_hi 0x0 address_lo 0x11280c00 data 23
[ 1.998021] mtk-pcie-gen3 11280000.pcie: msi#0x18 address_hi 0x0 address_lo 0x11280c00 data 24
[ 2.006611] mtk-pcie-gen3 11280000.pcie: msi#0x19 address_hi 0x0 address_lo 0x11280c00 data 25
[ 2.015202] mtk-pcie-gen3 11280000.pcie: msi#0x1a address_hi 0x0 address_lo 0x11280c00 data 26
[ 2.023792] mtk-pcie-gen3 11280000.pcie: msi#0x1b address_hi 0x0 address_lo 0x11280c00 data 27
[ 2.032382] mtk-pcie-gen3 11280000.pcie: msi#0x1c address_hi 0x0 address_lo 0x11280c00 data 28
[ 2.040972] mtk-pcie-gen3 11280000.pcie: msi#0x1d address_hi 0x0 address_lo 0x11280c00 data 29
[ 2.049560] mtk-pcie-gen3 11280000.pcie: msi#0x1e address_hi 0x0 address_lo 0x11280c00 data 30
[ 2.058152] mtk-pcie-gen3 11280000.pcie: msi#0x1f address_hi 0x0 address_lo 0x11280c00 data 31
[ 2.067241] mtk-pcie-gen3 11280000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11280c00 data 0
[ 2.075781] pcieport 0000:00:00.0: PME: Signaling with IRQ 127
[ 2.081805] pcieport 0000:00:00.0: AER: enabled with IRQ 127
[ 2.087524] pcieport 0000:00:00.0: save config 0x00: 0x1f3214c3
[ 2.093438] pcieport 0000:00:00.0: save config 0x04: 0x00100406
[ 2.099339] pcieport 0000:00:00.0: save config 0x08: 0x06040001
[ 2.105243] pcieport 0000:00:00.0: save config 0x0c: 0x00010000
[ 2.111149] pcieport 0000:00:00.0: save config 0x10: 0x20300004
[ 2.117049] pcieport 0000:00:00.0: save config 0x14: 0x00000000
[ 2.122952] pcieport 0000:00:00.0: save config 0x18: 0x00010100
[ 2.128852] pcieport 0000:00:00.0: save config 0x1c: 0x000001f1
[ 2.134755] pcieport 0000:00:00.0: save config 0x20: 0x20002000
[ 2.140655] pcieport 0000:00:00.0: save config 0x24: 0x20212011
[ 2.146558] pcieport 0000:00:00.0: save config 0x28: 0x00000000
[ 2.152460] pcieport 0000:00:00.0: save config 0x2c: 0x00000000
[ 2.158361] pcieport 0000:00:00.0: save config 0x30: 0x00000000
[ 2.164263] pcieport 0000:00:00.0: save config 0x34: 0x00000080
[ 2.170163] pcieport 0000:00:00.0: save config 0x38: 0x00000000
[ 2.176065] pcieport 0000:00:00.0: save config 0x3c: 0x0002017e
[ 2.220488] mt7530-mdio mdio-bus:1f: no interrupt support
[ 2.256472] mt7530-mdio mdio-bus:1f: configuring for fixed/2500base-x link mode
[ 2.265447] mt7530-mdio mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 2.275916] MediaTek MT7531 PHY mt7530-0:00: Configure LED registers (num=14)
[ 2.290447] mt7530-mdio mdio-bus:1f game (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7531 PHY] (irq=POLL)
[ 2.312420] MediaTek MT7531 PHY mt7530-0:01: Configure LED registers (num=14)
[ 2.326963] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=POLL)
[ 2.348589] MediaTek MT7531 PHY mt7530-0:02: Configure LED registers (num=14)
[ 2.363125] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=POLL)
[ 2.384731] MediaTek MT7531 PHY mt7530-0:03: Configure LED registers (num=14)
[ 2.399267] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=POLL)
[ 2.410646] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode
[ 2.417361] DSA: tree 0 setup
[ 2.420604] clk: Disabling unused clocks
[ 2.426909] VFS: Mounted root (squashfs filesystem) readonly on device 179:6.
[ 2.434203] Freeing unused kernel memory: 448K
[ 2.438670] Run /sbin/init as init process
[ 2.442767] with arguments:
[ 2.445718] /sbin/init
[ 2.448409] with environment:
[ 2.451538] HOME=/
[ 2.453882] TERM=linux
[ 2.456574] fstools_ignore_partname=1
[ 2.561279] init: Console is alive
[ 2.564780] init: - watchdog -
[ 2.898028] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.922041] usbcore: registered new interface driver usbfs
[ 2.927559] usbcore: registered new interface driver hub
[ 2.932917] usbcore: registered new device driver usb
[ 2.942840] gpio_button_hotplug: loading out-of-tree module taints kernel.
[ 2.954834] xhci-mtk 11200000.usb: xHCI Host Controller
[ 2.960068] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1
[ 2.970563] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000200010
[ 2.979720] xhci-mtk 11200000.usb: irq 128, io mem 0x11200000
[ 2.985585] xhci-mtk 11200000.usb: xHCI Host Controller
[ 2.990797] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2
[ 2.998180] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
[ 3.005589] hub 1-0:1.0: USB hub found
[ 3.009344] hub 1-0:1.0: 2 ports detected
[ 3.013640] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.022023] hub 2-0:1.0: USB hub found
[ 3.025777] hub 2-0:1.0: 1 port detected
[ 3.035290] usbcore: registered new interface driver usb-storage
[ 3.042149] usbcore: registered new interface driver uas
[ 3.047632] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.062183] init: - preinit -
[ 3.277404] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 3.285875] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
/etc/preinit: line 7: c0:98:79:a4:10:d3: not found
/etc/preinit: line 8: c0:98:79:a4:10:d2: not found
"" is invalid lladdr.
"" is invalid lladdr.
"" is invali[ 3.361289] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
d lladdr.
"" is invalid lladdr.
"" is invalid lladdr.
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 7.569148] mount_root: loading kmods from internal overlay
[ 7.582586] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 7.591802] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 7.695649] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 7.704018] block: unable to load configuration (fstab: Entry not found)
[ 7.710737] block: attempting to load /tmp/overlay/etc/config/fstab
[ 7.717095] block: unable to load configuration (fstab: Entry not found)
[ 7.723971] block: attempting to load /etc/config/fstab
[ 7.731866] block: unable to load configuration (fstab: Entry not found)
[ 7.738581] block: no usable configuration
[ 7.743446] block: attempting to load /etc/config/fstab
[ 7.748707] block: unable to load configuration (fstab: Entry not found)
[ 7.755509] block: no usable configuration
[ 7.760095] loop0: detected capacity change from 0 to 1048576
[ 7.810923] loop0: detected capacity change from 1048576 to 1030912
[ 7.867540] F2FS-fs (loop0): Mounted with checkpoint version = 6147d281
[ 7.874690] mount_root: loading kmods from internal overlay
[ 7.882458] kmodloader: failed to open /tmp/overlay/upper/lib/modules/6.6.86/cifs_arc4.ko
[ 7.890671] kmodloader: failed to open /tmp/overlay/upper/lib/modules/6.6.86/cifs_md4.ko
[ 7.898797] kmodloader: failed to open /tmp/overlay/upper/lib/modules/6.6.86/ksmbd.ko
[ 7.906690] kmodloader: failed to open /tmp/overlay/upper/lib/modules/6.6.86/netfs.ko
[ 7.914536] kmodloader: failed to open /tmp/overlay/upper/lib/modules/6.6.86/nls_ucs2_utils.ko
[ 7.923164] kmodloader: failed to open /tmp/overlay/upper/lib/modules/6.6.86/oid_registry.ko
[ 7.931622] kmodloader: failed to open /tmp/overlay/upper/lib/modules/6.6.86/usblp.ko
[ 7.944248] mount_root: failed to launch kmodloader from internal overlay
[ 8.000369] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 8.007651] block: extroot: not configured
[ 8.011968] block: attempting to load /etc/config/fstab
[ 8.017228] block: unable to load configuration (fstab: Entry not found)
[ 8.024395] block: no usable configuration
[ 8.029168] mount_root: switching to f2fs overlay
[ 8.035738] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 8.046889] urandom-seed: Seeding with /etc/urandom.seed
[ 8.069772] random: procd: uninitialized urandom read (4 bytes read)
[ 8.072189] procd: - early -
[ 8.079089] procd: - watchdog -
[ 8.603668] procd: - watchdog -
[ 8.607107] procd: - ubus -
[ 11.351155] random: crng init done
[ 11.364239] procd: - init -
Please press Enter to activate this console.
[ 11.587970] kmodloader: loading kernel modules from /etc/modules.d/*
[ 11.614973] OpenVPN data channel offload (ovpn-dco) 2.0.0 -- (C) 2020-2023 OpenVPN, Inc.
[ 11.624705] tun: Universal TUN/TAP device driver, 1.6
[ 11.633255] ntfs3: Enabled Linux POSIX ACLs support
[ 11.640199] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0
[ 11.659003] usbcore: registered new interface driver cdc_acm
[ 11.664748] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 11.674193] usbcore: registered new interface driver cdc_wdm
[ 11.680362] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a
[ 11.687862] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2
[ 11.704884] usbcore: registered new interface driver usbserial_generic
[ 11.711493] usbserial: USB Serial support registered for generic
[ 11.718490] usbcore: registered new interface driver cdc_ether
[ 11.725428] usbcore: registered new interface driver cdc_ncm
[ 11.732662] urngd: v1.0.2 started.
[ 11.748248] usbcore: registered new interface driver huawei_cdc_ncm
[ 11.771385] mt7915e 0000:01:00.0: assign IRQ: got 126
[ 11.776453] mt7915e 0000:01:00.0: enabling device (0000 -> 0002)
[ 11.782534] mt7915e 0000:01:00.0: enabling bus mastering
[ 11.861063] mtk-pcie-gen3 11280000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11280c00 data 1
[ 11.891622] mt7915e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20240823172725a
[ 11.891622]
[ 11.995330] mt7915e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20240823172741
[ 12.077269] mt7915e 0000:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20240823172837
[ 12.189686] mt7915e 0000:01:00.0: missing precal data, size=403472
[ 12.196045] mt7915e 0000:01:00.0: registering led 'mt76-phy0'
[ 12.272414] mt7915e 0000:01:00.0: registering led 'mt76-phy1'
[ 12.641418] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20240823160656a
[ 12.641418]
[ 12.746044] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20240823160721
[ 12.834119] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20240823160840
[ 12.940478] mt798x-wmac 18000000.wifi: missing precal data, size=403472
[ 12.947301] mt798x-wmac 18000000.wifi: registering led 'mt76-phy2'
[ 13.043201] PPP generic driver version 2.4.2
[ 13.048378] NET: Registered PF_PPPOX protocol family
[ 13.054728] usbcore: registered new interface driver qmi_wwan
[ 13.061547] usbcore: registered new interface driver rndis_host
[ 13.068446] usbcore: registered new interface driver sierra
[ 13.074135] usbserial: USB Serial support registered for Sierra USB modem
[ 13.083997] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 13.091905] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 13.102611] usbcore: registered new interface driver cdc_mbim
[ 13.110737] usbcore: registered new interface driver option
[ 13.116429] usbserial: USB Serial support registered for GSM modem (1-port)
[ 13.125403] usbcore: registered new interface driver qcserial
[ 13.131232] usbserial: USB Serial support registered for Qualcomm USB modem
[ 13.138450] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 15.654439] mtk_soc_eth 15100000.ethernet eth0: Link is Down
[ 15.667848] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 15.676340] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 15.682840] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
[ 15.695850] br-lan: port 1(lan1) entered blocking state
[ 15.701070] br-lan: port 1(lan1) entered disabled state
[ 15.706296] mt7530-mdio mdio-bus:1f lan1: entered allmulticast mode
[ 15.712551] mtk_soc_eth 15100000.ethernet eth0: entered allmulticast mode
[ 15.722019] mt7530-mdio mdio-bus:1f lan1: entered promiscuous mode
[ 15.738706] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
[ 15.749590] br-lan: port 2(lan2) entered blocking state
[ 15.754880] br-lan: port 2(lan2) entered disabled state
[ 15.760134] mt7530-mdio mdio-bus:1f lan2: entered allmulticast mode
[ 15.768103] mt7530-mdio mdio-bus:1f lan2: entered promiscuous mode
[ 15.781978] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
[ 15.792624] br-lan: port 3(lan3) entered blocking state
[ 15.797838] br-lan: port 3(lan3) entered disabled state
[ 15.803088] mt7530-mdio mdio-bus:1f lan3: entered allmulticast mode
[ 15.811159] mt7530-mdio mdio-bus:1f lan3: entered promiscuous mode
[ 15.824990] mt7530-mdio mdio-bus:1f game: configuring for phy/gmii link mode
[ 15.835638] br-lan: port 4(game) entered blocking state
[ 15.840849] br-lan: port 4(game) entered disabled state
[ 15.846086] mt7530-mdio mdio-bus:1f game: entered allmulticast mode
[ 15.854289] mt7530-mdio mdio-bus:1f game: entered promiscuous mode
[ 15.881285] mtk_soc_eth 15100000.ethernet eth1: PHY [mdio-bus:06] driver [Maxlinear Ethernet GPY211C] (irq=POLL)
[ 15.891463] mtk_soc_eth 15100000.ethernet eth1: configuring for phy/2500base-x link mode
[ 19.914684] mt7530-mdio mdio-bus:1f lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 20.511507] br-lan: port 2(lan2) entered blocking state
[ 20.516735] br-lan: port 2(lan2) entered forwarding state
[ 21.163460] br-guest: port 1(phy0-ap0) entered blocking state
[ 21.169204] br-guest: port 1(phy0-ap0) entered disabled state
[ 21.175027] mt7915e 0000:01:00.0 phy0-ap0: entered allmulticast mode
[ 21.181533] mt7915e 0000:01:00.0 phy0-ap0: entered promiscuous mode
[ 21.187891] br-guest: port 1(phy0-ap0) entered blocking state
[ 21.193630] br-guest: port 1(phy0-ap0) entered forwarding state
[ 21.407422] br-lan: port 5(phy2-ap0) entered blocking state
[ 21.413067] br-lan: port 5(phy2-ap0) entered disabled state
[ 21.418663] mt798x-wmac 18000000.wifi phy2-ap0: entered allmulticast mode
[ 21.425631] mt798x-wmac 18000000.wifi phy2-ap0: entered promiscuous mode
[ 21.432466] br-lan: port 5(phy2-ap0) entered blocking state
[ 21.438021] br-lan: port 5(phy2-ap0) entered forwarding state
[ 21.534779] br-lan: port 5(phy2-ap0) entered disabled state
[ 21.540660] br-guest: port 2(phy1-ap0) entered blocking state
[ 21.546519] br-guest: port 2(phy1-ap0) entered disabled state
[ 21.552326] mt7915e 0000:01:00.0 phy1-ap0: entered allmulticast mode
[ 21.558815] mt7915e 0000:01:00.0 phy1-ap0: entered promiscuous mode
[ 21.833520] br-lan: port 5(phy2-ap0) entered blocking state
[ 21.839098] br-lan: port 5(phy2-ap0) entered forwarding state
[ 36.613876] br-guest: port 2(phy1-ap0) entered blocking state
[ 36.619632] br-guest: port 2(phy1-ap0) entered forwarding state