cześć. Mógłby ktoś powiedzieć w czym jest problem. Musiałem od nowa zainstalować openwrt na swoim routerze Predator W6.
Wszystko działa ok, poza jednym. Jedno radio miałem skonfogurowane przez Radiusa na NAS i działało przed reinstalacją. Może nie ten pakiet zainstalowałem? Aktualnie używam wpad-openssl - 2024.09.15~5ace39b0-r2.
Dziwne, jest to, że z gui wygląda jakby radio działało, logi też raczej nic sensownego nie pokazują ale jak próbuję wyszukać to nie widać SSID.

Poniżej konfig:
config wifi-iface 'wifinet2'
        option device 'radio1'
        option mode 'ap'
        option ssid 'OpenWrt'
        option encryption 'wpa3'
        option auth_server '<ip_nas>'
        option auth_port '1812'
        option auth_secret 'haselko'
        option network 'lan'
        option ocv '0'

logi podczas restartu radia:
Fri May 30 14:08:07 2025 daemon.notice netifd: Network device 'phy1-ap0' link is down
Fri May 30 14:08:07 2025 daemon.notice wpa_supplicant[2389]: Set new config for phy phy1
Fri May 30 14:08:07 2025 daemon.notice netifd: Wireless device 'radio1' is now down
Fri May 30 14:08:07 2025 daemon.notice netifd: radio1 (26802): WARNING: Variable 'data' does not exist or is not an array/object
Fri May 30 14:08:07 2025 daemon.notice hostapd: Set new config for phy phy1:
Fri May 30 14:08:07 2025 daemon.notice wpa_supplicant[2389]: Set new config for phy phy1
Fri May 30 14:08:07 2025 daemon.notice wpa_supplicant[2389]: Set new config for phy phy1
Fri May 30 14:08:07 2025 daemon.notice hostapd: Set new config for phy phy1: /var/run/hostapd-phy1.conf
Fri May 30 14:08:07 2025 daemon.notice hostapd: Restart interface for phy phy1
Fri May 30 14:08:07 2025 daemon.notice hostapd: Configuration file: data: driver=nl80211 logger_syslog=127 logger_syslog_level=2 logger_stdout=127 logger_stdout_level=2 country_code=PL ieee80211d=1 ieee80211h=1 hw_mode=a beacon_int=100 he_6ghz_reg_pwr_type=0 stationary_ap=1 #num_global_macaddr=1 #macaddr_base= op_class=133 ieee80211ax=1 he_oper_chwidth=1 he_oper_centr_freq_seg0_idx=6 he_su_beamformer=1 he_su_beamformee=1 he_mu_beamformer=1 he_bss_color=128 he_spr_sr_control=3 he_default_pe_duration=4 he_rts_threshold=1023 he_mu_edca_qos_info_param_count=0 he_mu_edca_qos_info_q_ack=0 he_mu_edca_qos_info_queue_request=0 he_mu_edca_qos_info_txop_request=0 he_mu_edca_ac_be_aifsn=8 he_mu_edca_ac_be_aci=0 he_mu_edca_ac_be_ecwmin=9 he_mu_edca_ac_be_ecwmax=10 he_mu_edca_ac_be_timer=255 he_mu_edca_ac_bk_aifsn=15 he_mu_edca_ac_bk_aci=1 he_mu_edca_ac_bk_ecwmin=9 he_mu_edca_ac_bk_ecwmax=10 he_mu_edca_ac_bk_timer=255 he_mu_edca_ac_vi_ecwmin=5 he_mu_edca_ac_vi_ecwmax=7 he_mu_edca_ac_vi_aifsn=5 he_mu_edca_ac_vi_aci=2 he_mu_edca_ac_vi_timer=2
Fri May 30 14:08:07 2025 kern.info kernel: [56705.222427] br-lan: port 5(phy1-ap0) entered blocking state
Fri May 30 14:08:07 2025 kern.info kernel: [56705.228055] br-lan: port 5(phy1-ap0) entered disabled state
Fri May 30 14:08:07 2025 kern.info kernel: [56705.233651] mt7915e 0000:01:00.0 phy1-ap0: entered allmulticast mode
Fri May 30 14:08:07 2025 kern.info kernel: [56705.240196] mt7915e 0000:01:00.0 phy1-ap0: entered promiscuous mode
Fri May 30 14:08:07 2025 kern.info kernel: [56705.246635] br-lan: port 5(phy1-ap0) entered blocking state
Fri May 30 14:08:07 2025 kern.info kernel: [56705.252190] br-lan: port 5(phy1-ap0) entered forwarding state
Fri May 30 14:08:07 2025 daemon.notice hostapd: phy1-ap0: interface state UNINITIALIZED->COUNTRY_UPDATE
Fri May 30 14:08:07 2025 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Fri May 30 14:08:07 2025 daemon.notice hostapd: phy1-ap0: interface state COUNTRY_UPDATE->ACS
Fri May 30 14:08:07 2025 daemon.notice hostapd: phy1-ap0: ACS-STARTED
Fri May 30 14:08:07 2025 daemon.notice netifd: Wireless device 'radio1' is now up