Odp: Linksys WHW01 (Velop)
Jakim w ogóle klientem się podłączasz? 2x2 AC?
Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.
Strony Poprzednia 1 2 3 Następna
Zaloguj się lub zarejestruj by napisać odpowiedź
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
Linksys WHW01 (Velop) (Strona 2 z 3)
eko.one.pl → Sprzęt / Hardware → Linksys WHW01 (Velop)
Posty: 26 do 50 z 54
27 2024-02-16 18:50:55 (edytowany przez tyka 2024-02-16 18:54:21)
Odp: Linksys WHW01 (Velop)
Jeden klient posiada kartę AX1650x wiec 2x2
Drugi Iphone 11 - wiec pewnie to samo.
Co mnie zadziwia, to to, że stary sprzet Asusa Lyra Trio (z tym że jest tam 3x3) pozwala moim klientom ogarnąć pełną predkość łącza 500mbps bez problemu.
I dodatkowo, testowałem predkosc na oryginalnym WHW01 linksys firmware, i szło 500mbps...
Odp: Linksys WHW01 (Velop)
Velop MX4200 - młodszy brat? Po 339 zł lata na alle...
Odp: Linksys WHW01 (Velop)
kafarowski napisał/a:
Velop MX4200 - młodszy brat? Po 339 zł lata na alle...
Owszem ale tylko 512MB ramu...
Dom : router https://i.imgur.com/IuB6Zwy.png | TP-LINK T1700G-28TQ |Zyxel XGS-1210-12 | 6x Ruckus r310 unleashed + Ruckus icx7150-c12p | Truenas scale 124TB 25Gb| Xpenology 12TB | apc smart ups 750 lcd 
100Mb/s - 25Gb/s
Podróżne : GL.Inet MT3000 +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip + panel 285Wp + lifepo4 12v 60Ah .
100Mb/s - 25Gb/sPodróżne : GL.Inet MT3000 +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip + panel 285Wp + lifepo4 12v 60Ah .
Odp: Linksys WHW01 (Velop)
ambrozy5 napisał/a:
kafarowski napisał/a:Velop MX4200 - młodszy brat? Po 339 zł lata na alle...
Owszem ale tylko 512MB ramu...
Nie wiem czy to dobre określenie. Jest to router WiFi 6 oparty na zupełnie innym SoC IPQ8174 (nie obsługuje 160MHz). Wersja V2 ma 1GB pamięci RAM.
31 2024-07-03 22:13:04 (edytowany przez kafarowski 2024-07-03 23:40:41)
Odp: Linksys WHW01 (Velop)
Jest dwa razy większy od WHW01. Wifi nie sprawdzę bo nawet żadnej karty w tym standardzie nie mam.
I jeszcze log ze startu:
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.000000] Linux version 6.6.35 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r26833-6b16eaf840) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Tue Jul 2 22:40:15 2024
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] Machine model: Linksys MX4200v1
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable nss@40000000
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] OF: reserved mem: 0x000000004a400000..0x000000004a5fffff (2048 KiB) nomap non-reusable tzapp@4a400000
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable bootloader@4a600000
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable sbl@4aa00000
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004abfffff (1024 KiB) nomap non-reusable smem@4ab00000
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] OF: reserved mem: 0x000000004ac00000..0x000000004affffff (4096 KiB) nomap non-reusable memory@4ac00000
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] OF: reserved mem: 0x000000004b000000..0x0000000050efffff (97280 KiB) nomap non-reusable wcnss@4b000000
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] OF: reserved mem: 0x0000000050f00000..0x0000000050ffffff (1024 KiB) nomap non-reusable q6_etr_dump@50f00000
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] OF: reserved mem: 0x0000000051000000..0x00000000510fffff (1024 KiB) nomap non-reusable m3_dump@51000000
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] Zone ranges:
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff]
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] DMA32 empty
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] Normal empty
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] Movable zone start for each node
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] Early memory node ranges
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff]
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff]
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] node 0: [mem 0x000000004a400000-0x00000000510fffff]
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000051100000-0x000000005fffffff]
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] psci: probing for conduit method from DT.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] psci: PSCIv1.0 detected in firmware.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] psci: Using standard PSCI v0.2 function IDs
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] psci: SMC Calling Convention v1.0
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] percpu: Embedded 18 pages/cpu s35752 r8192 d29784 u73728
Tue Jul 2 22:40:26 2024 kern.debug kernel: [ 0.000000] pcpu-alloc: s35752 r8192 d29784 u73728 alloc=18*4096
Tue Jul 2 22:40:26 2024 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] Detected VIPT I-cache on CPU0
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] alternatives: applying boot alternatives
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.000000] Kernel command line: init=/sbin/init rootfstype=squashfs ubi.mtd=22,2048 ubi.block=0,0 root=/dev/ubiblock0_0 rootwait ro root=/dev/ubiblock0_0
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] software IO TLB: area num 4.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] software IO TLB: mapped [mem 0x000000005f4c0000-0x000000005f5c0000] (1MB)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] Memory: 371216K/524288K available (8384K kernel code, 896K rwdata, 2528K rodata, 1472K init, 292K bss, 153072K reserved, 0K cma-reserved)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] rcu: Hierarchical RCU implementation.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] Tracing variant of Tasks RCU enabled.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] Root IRQ handler: gic_handle_irq
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000106] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.000119] pid_max: default: 32768 minimum: 301
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.005090] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.005103] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.009366] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.009587] rcu: Hierarchical SRCU implementation.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.009592] rcu: Max phase no-delay instances is 1000.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.010510] smp: Bringing up secondary CPUs ...
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.011185] Detected VIPT I-cache on CPU1
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.011287] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.011952] Detected VIPT I-cache on CPU2
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.012021] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.012688] Detected VIPT I-cache on CPU3
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.012753] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.012823] smp: Brought up 1 node, 4 CPUs
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.012832] SMP: Total of 4 processors activated.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.012837] CPU features: detected: 32-bit EL0 Support
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.012841] CPU features: detected: CRC32 instructions
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.012908] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.012916] CPU: All CPU(s) started at EL1
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.012919] alternatives: applying system-wide alternatives
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.022661] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.022686] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.024422] pinctrl core: initialized pinctrl subsystem
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.026517] NET: Registered PF_NETLINK/PF_ROUTE protocol family
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.027133] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.027171] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.027204] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.027587] thermal_sys: Registered thermal governor 'step_wise'
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.027644] cpuidle: using governor menu
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.027889] ASID allocator initialised with 65536 entries
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.054272] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.056506] Modules: 29344 pages in range for non-PLT usage
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.056514] Modules: 520864 pages in range for PLT usage
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.059761] SCSI subsystem initialized
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.059965] usbcore: registered new interface driver usbfs
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.059998] usbcore: registered new interface driver hub
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.060048] usbcore: registered new device driver usb
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.060493] qcom_scm: convention: smc arm 64
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.062296] clocksource: Switched to clocksource arch_sys_counter
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.066269] NET: Registered PF_INET protocol family
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.066420] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.068955] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.068974] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.068989] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.069037] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.069177] TCP: Hash tables configured (established 4096 bind 4096)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.069265] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.069303] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.069830] NET: Registered PF_UNIX/PF_LOCAL protocol family
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.069871] PCI: CLS 0 bytes, default 64
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.071447] workingset: timestamp_bits=46 max_order=17 bucket_order=0
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.072192] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.072199] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.076121] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
Tue Jul 2 22:40:26 2024 kern.warn kernel: [ 0.078712] qcom-qmp-usb-phy 78000.phy: supply vdda-phy not found, using dummy regulator
Tue Jul 2 22:40:26 2024 kern.warn kernel: [ 0.078846] qcom-qmp-usb-phy 78000.phy: supply vdda-pll not found, using dummy regulator
Tue Jul 2 22:40:26 2024 kern.warn kernel: [ 0.080058] qcom-qusb2-phy 79000.phy: supply vdd not found, using dummy regulator
Tue Jul 2 22:40:26 2024 kern.warn kernel: [ 0.080192] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator
Tue Jul 2 22:40:26 2024 kern.warn kernel: [ 0.080247] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.080440] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.088991] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.093057] msm_serial 78b1000.serial: msm_serial: detected port #1
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.093098] msm_serial 78b1000.serial: uartclk = 19200000
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.093413] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 20, base_baud = 1200000) is a MSM
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.093884] msm_serial 78b3000.serial: msm_serial: detected port #0
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.093917] msm_serial 78b3000.serial: uartclk = 3686400
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.094223] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 21, base_baud = 230400) is a MSM
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.094256] msm_serial: console setup on port #0
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.094297] printk: console [ttyMSM0] enabled
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.893299] msm_serial: driver initialized
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.902370] loop: module loaded
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.903790] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xac
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.904328] nand: Hynix H27S4G8F2EDA-BC
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 0.910916] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.914989] 29 fixed-partitions partitions found on MTD device qcom_nand.0
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.922134] Creating 29 MTD partitions on "qcom_nand.0":
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.929085] 0x000000000000-0x000000100000 : "0:sbl1"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.936275] 0x000000100000-0x000000200000 : "0:mibib"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.940918] 0x000000200000-0x000000280000 : "0:bootconfig"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.945516] 0x000000280000-0x000000300000 : "0:bootconfig1"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.950783] 0x000000300000-0x000000600000 : "0:qsee"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.958584] 0x000000600000-0x000000900000 : "0:qsee_1"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.963782] 0x000000900000-0x000000980000 : "0:devcfg"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.966450] 0x000000980000-0x000000a00000 : "0:devcfg_1"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.971501] 0x000000a00000-0x000000a80000 : "0:apdp"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.977022] 0x000000a80000-0x000000b00000 : "0:apdp_1"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.981965] 0x000000b00000-0x000000b80000 : "0:rpm"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.987021] 0x000000b80000-0x000000c00000 : "0:rpm_1"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.991684] 0x000000c00000-0x000000c80000 : "0:cdt"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 0.996944] 0x000000c80000-0x000000d00000 : "0:cdt_1"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 1.001557] 0x000000d00000-0x000000d80000 : "0:appsblenv"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 1.006808] 0x000000d80000-0x000000e80000 : "0:appsbl"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 1.012643] 0x000000e80000-0x000000f80000 : "0:appsbl_1"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 1.017696] 0x000000f80000-0x000001000000 : "0:art"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 1.022683] 0x000001000000-0x000001040000 : "u_env"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 1.027070] 0x000001040000-0x000001060000 : "s_env"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 1.031774] 0x000001060000-0x000001080000 : "devinfo"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 1.036649] 0x000001080000-0x00000a680000 : "kernel"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 1.183050] 0x000001680000-0x00000a680000 : "rootfs"
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.320267] mtd: setting mtd22 (rootfs) as root device
Tue Jul 2 22:40:26 2024 kern.alert kernel: [ 1.320631] mtdsplit: no squashfs found in "rootfs"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 1.324352] 0x00000a680000-0x000013c80000 : "alt_kernel"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 1.472051] 0x00000ac80000-0x000013c80000 : "alt_rootfs"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 1.609453] 0x000013c80000-0x000013e80000 : "sysdiag"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 1.611851] 0x000013e80000-0x000013f00000 : "0:ethphyfw"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 1.614475] 0x000013f00000-0x00001f700000 : "syscfg"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 1.794014] 0x00001f700000-0x000020000000 : "0:wififw"
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.813473] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.831902] i2c_dev: i2c /dev entries driver
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.839046] sdhci: Secure Digital Host Controller Interface driver
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.839092] sdhci: Copyright(c) Pierre Ossman
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.844156] sdhci-pltfm: SDHCI platform and OF driver helper
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.850457] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.856985] NET: Registered PF_INET6 protocol family
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.860827] Segment Routing with IPv6
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.865198] In-situ OAM (IOAM) with IPv6
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.868763] NET: Registered PF_PACKET protocol family
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.872785] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.877868] 8021q: 802.1Q VLAN Support v1.8
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.918216] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.918552] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.924380] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.930942] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.938622] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.946124] cpr3_mem_acc_init: apc: not using memory accelerator regulator
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.955253] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.962196] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 824000 uV
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.972185] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 888000 uV
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.981993] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 984000 uV
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 1.991850] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 696, quot_offset[ 7]= 0
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 2.001620] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 924, quot_offset[ 7]= 225
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 2.012465] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1032, quot_offset[ 7]= 105
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 2.023402] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1203, quot_offset[ 7]= 170
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 2.034546] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 2.037182] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 2.054014] remoteproc remoteproc0: cd00000.q6v5_wcss is available
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 2.063049] ubi0: attaching mtd22
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 2.332302] random: crng init done
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 2.890394] ubi0: scanning is finished
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 2.898438] ubi0: attached mtd22 (name "rootfs", size 144 MiB)
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 2.898481] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 2.903197] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 2.910031] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 2.916894] ubi0: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 2.923666] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 2.929910] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1719960015
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 2.937037] ubi0: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 80
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 2.946335] ubi0: background thread "ubi_bgt0d" started, PID 700
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 2.946792] block ubiblock0_0: created from ubi0:0(rootfs)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 2.961693] clk: Disabling unused clocks
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 2.970598] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 2.971124] Freeing unused kernel memory: 1472K
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 2.976881] Run /sbin/init as init process
Tue Jul 2 22:40:26 2024 kern.debug kernel: [ 2.981053] with arguments:
Tue Jul 2 22:40:26 2024 kern.debug kernel: [ 2.981055] /sbin/init
Tue Jul 2 22:40:26 2024 kern.debug kernel: [ 2.981058] with environment:
Tue Jul 2 22:40:26 2024 kern.debug kernel: [ 2.981060] HOME=/
Tue Jul 2 22:40:26 2024 kern.debug kernel: [ 2.981062] TERM=linux
Tue Jul 2 22:40:26 2024 user.info kernel: [ 3.180443] init: Console is alive
Tue Jul 2 22:40:26 2024 user.info kernel: [ 3.180578] init: - watchdog -
Tue Jul 2 22:40:26 2024 user.info kernel: [ 3.931698] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Tue Jul 2 22:40:26 2024 kern.warn kernel: [ 3.965422] gpio_button_hotplug: loading out-of-tree module taints kernel.
Tue Jul 2 22:40:26 2024 kern.warn kernel: [ 4.009684] ssdk_dt_parse_interrupt[934]:INFO:intr-gpio does not exist
Tue Jul 2 22:40:26 2024 kern.warn kernel: [ 4.306358] adpt_hppe_uniphy_mode_set[1398]:INFO:ssdk doesn't support mode:0 in uniphy:0 on platform!
Tue Jul 2 22:40:26 2024 kern.warn kernel: [ 4.306514] regi_init[2525]:INFO:Initializing HPPE Done!!
Tue Jul 2 22:40:26 2024 kern.warn kernel: [ 4.314663] regi_init[2574]:INFO:qca-ssdk module init succeeded!
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.322506] EDMA ver 1 hw init
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.326247] EDMA HW Reset completed succesfully
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.328921] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.333329] RxDesc:1 (15-15) RxFill:1 (7-7)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.338908] dp2: ppe offload disabled: 0 for macid 2
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.342710] dp2: Switch attached to macid 2 status: 0
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.543070] Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.544009] GMAC3(ffffff80031ee940) Invalid MAC@ - using 96:6a:27:d0:a0:13
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.551966] dp3: ppe offload disabled: 0 for macid 3
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.558845] dp3: Switch attached to macid 3 status: 0
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.642648] Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.643570] GMAC4(ffffff8004013940) Invalid MAC@ - using 16:1f:64:bb:a1:f4
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.651541] dp4: ppe offload disabled: 0 for macid 4
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.658414] dp4: Switch attached to macid 4 status: 0
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.742646] Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.743595] GMAC5(ffffff8004016940) Invalid MAC@ - using 16:99:7e:64:75:83
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.751539] dp5: ppe offload disabled: 0 for macid 5
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.758417] dp5: Switch attached to macid 5 status: 0
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.842656] Qualcomm QCA8075 90000.mdio-1:04: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:04, irq=POLL)
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.843534] **********************************************************
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.851548] * NSS Data Plane driver
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.858074] **********************************************************
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.874432] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.874490] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.878947] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002000010
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.886457] xhci-hcd xhci-hcd.1.auto: irq 39, io mem 0x08a00000
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.895891] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.901650] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.907220] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.915307] hub 1-0:1.0: USB hub found
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.921383] hub 1-0:1.0: 1 port detected
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.925538] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.929533] hub 2-0:1.0: USB hub found
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 4.937379] hub 2-0:1.0: 1 port detected
Tue Jul 2 22:40:26 2024 user.info kernel: [ 4.944588] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Tue Jul 2 22:40:26 2024 user.info kernel: [ 4.945660] init: - preinit -
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 7.572627] UBIFS (ubi0:1): Mounting in unauthenticated mode
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 7.572757] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 942
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 7.611940] UBIFS (ubi0:1): recovery needed
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 7.724004] UBIFS (ubi0:1): recovery completed
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 7.724096] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 7.727345] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 7.735266] UBIFS (ubi0:1): FS size: 126849024 bytes (120 MiB, 999 LEBs), max 1010 LEBs, journal size 6348800 bytes (6 MiB, 50 LEBs)
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 7.745157] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Tue Jul 2 22:40:26 2024 kern.notice kernel: [ 7.757122] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 80716D91-2213-4F94-BDBE-9888EE45C5C0, small LPT model
Tue Jul 2 22:40:26 2024 user.info kernel: [ 7.768174] mount_root: switching to ubifs overlay
Tue Jul 2 22:40:26 2024 kern.warn kernel: [ 7.780178] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
Tue Jul 2 22:40:26 2024 user.warn kernel: [ 7.785582] urandom-seed: Seeding with /etc/urandom.seed
Tue Jul 2 22:40:26 2024 user.info kernel: [ 7.843442] procd: - early -
Tue Jul 2 22:40:26 2024 user.info kernel: [ 7.843552] procd: - watchdog -
Tue Jul 2 22:40:26 2024 user.info kernel: [ 8.402971] procd: - watchdog -
Tue Jul 2 22:40:26 2024 user.info kernel: [ 8.403621] procd: - ubus -
Tue Jul 2 22:40:26 2024 user.info kernel: [ 8.558928] procd: - init -
Tue Jul 2 22:40:26 2024 user.info kernel: [ 8.840721] kmodloader: loading kernel modules from /etc/modules.d/*
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 8.966005] hid: raw HID events driver (C) Jiri Kosina
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 8.978020] Bluetooth: Core ver 2.22
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 8.978147] NET: Registered PF_BLUETOOTH protocol family
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 8.980670] Bluetooth: HCI device and connection manager initialized
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 8.986016] Bluetooth: HCI socket layer initialized
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 8.992318] Bluetooth: L2CAP socket layer initialized
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 8.996914] Bluetooth: SCO socket layer initialized
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.003332] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.006800] Bluetooth: BNEP filters: protocol multicast
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.012406] Bluetooth: BNEP socket layer initialized
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.021056] usbcore: registered new interface driver btusb
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.023401] Loading modules backported from Linux version v6.6.15-0-g51f354b815c4
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.027812] Backport generated by backports.git 193becf2
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.036381] Bluetooth: HCI UART driver ver 2.3
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.040739] Bluetooth: HCI UART protocol H4 registered
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.045023] Bluetooth: HCI UART protocol BCSP registered
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.050114] Bluetooth: HCI UART protocol ATH3K registered
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.056638] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.060891] Bluetooth: HIDP socket layer initialized
Tue Jul 2 22:40:26 2024 user.info kernel: [ 9.066408] urngd: v1.0.2 started.
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.077748] NET: Registered PF_QIPCRTR protocol family
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.079818] Bluetooth: RFCOMM TTY layer initialized
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.081794] Bluetooth: RFCOMM socket layer initialized
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.086593] Bluetooth: RFCOMM ver 1.11
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.134470] PPP generic driver version 2.4.2
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.135397] NET: Registered PF_PPPOX protocol family
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.147946] ath11k c000000.wifi: ipq8074 hw2.0
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.147982] ath11k c000000.wifi: FW memory mode: 1
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.151546] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 9.156578] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 10.399894] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
Tue Jul 2 22:40:26 2024 kern.warn kernel: [ 10.443814] ath11k c000000.wifi: qmi ignore invalid mem req type 3
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 10.451258] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 10.451294] ath11k c000000.wifi: fw_version 0x290604a5 fw_build_timestamp 2023-10-12 02:06 fw_build_id WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 10.614977] remoteproc remoteproc0: stopped remote processor cd00000.q6v5_wcss
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 10.615022] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 10.621179] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 10.973186] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
Tue Jul 2 22:40:26 2024 user.info kernel: [ 10.976405] kmodloader: done loading kernel modules from /etc/modules.d/*
Tue Jul 2 22:40:26 2024 kern.warn kernel: [ 11.017120] ath11k c000000.wifi: qmi ignore invalid mem req type 3
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 11.024558] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
Tue Jul 2 22:40:26 2024 kern.info kernel: [ 11.024618] ath11k c000000.wifi: fw_version 0x290604a5 fw_build_timestamp 2023-10-12 02:06 fw_build_id WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1
Tue Jul 2 22:40:26 2024 kern.warn kernel: [ 11.242741] ath11k c000000.wifi: htt event 48 not handled
Tue Jul 2 22:40:26 2024 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Tue Jul 2 22:40:26 2024 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Tue Jul 2 22:40:26 2024 daemon.info dnsmasq[1]: started, version 2.90 cachesize 1000
Tue Jul 2 22:40:26 2024 daemon.info dnsmasq[1]: DNS service limited to local subnets
Tue Jul 2 22:40:26 2024 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Tue Jul 2 22:40:26 2024 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Tue Jul 2 22:40:26 2024 daemon.info dnsmasq[1]: using only locally-known addresses for test
Tue Jul 2 22:40:26 2024 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Tue Jul 2 22:40:26 2024 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Tue Jul 2 22:40:26 2024 daemon.info dnsmasq[1]: using only locally-known addresses for local
Tue Jul 2 22:40:26 2024 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Tue Jul 2 22:40:26 2024 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Tue Jul 2 22:40:26 2024 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Tue Jul 2 22:40:26 2024 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Tue Jul 2 22:40:26 2024 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Jul 2 22:40:26 2024 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 names
Tue Jul 2 22:40:26 2024 authpriv.info dropbear[1732]: Not backgrounding
Tue Jul 2 22:40:27 2024 user.notice : Added device handler type: bonding
Tue Jul 2 22:40:27 2024 user.notice : Added device handler type: 8021ad
Tue Jul 2 22:40:27 2024 user.notice : Added device handler type: 8021q
Tue Jul 2 22:40:27 2024 user.notice : Added device handler type: macvlan
Tue Jul 2 22:40:27 2024 user.notice : Added device handler type: veth
Tue Jul 2 22:40:27 2024 user.notice : Added device handler type: bridge
Tue Jul 2 22:40:27 2024 user.notice : Added device handler type: Network device
Tue Jul 2 22:40:27 2024 user.notice : Added device handler type: tunnel
Tue Jul 2 22:40:27 2024 daemon.notice wpa_supplicant[1886]: Successfully initialized wpa_supplicant
Tue Jul 2 22:40:27 2024 user.notice smp_affinity: Pinning IRQ(69) reo2host-destination-ring1 to CPU 0
Tue Jul 2 22:40:27 2024 user.notice smp_affinity: Pinning IRQ(70) reo2host-destination-ring2 to CPU 1
Tue Jul 2 22:40:27 2024 user.notice smp_affinity: Pinning IRQ(71) reo2host-destination-ring3 to CPU 2
Tue Jul 2 22:40:27 2024 user.notice smp_affinity: Pinning IRQ(72) reo2host-destination-ring4 to CPU 3
Tue Jul 2 22:40:27 2024 user.notice smp_affinity: Pinning IRQ(50) wbm2host-tx-completions-ring1 to CPU 1
Tue Jul 2 22:40:27 2024 user.notice smp_affinity: Pinning IRQ(56) wbm2host-tx-completions-ring2 to CPU 2
Tue Jul 2 22:40:27 2024 user.notice smp_affinity: Pinning IRQ(59) wbm2host-tx-completions-ring3 to CPU 3
Tue Jul 2 22:40:27 2024 user.notice smp_affinity: Pinning IRQ(63) ppdu-end-interrupts-mac1 to CPU 1
Tue Jul 2 22:40:27 2024 user.notice smp_affinity: Pinning IRQ(67) ppdu-end-interrupts-mac2 to CPU 2
Tue Jul 2 22:40:27 2024 user.notice smp_affinity: Pinning IRQ(65) ppdu-end-interrupts-mac3 to CPU 3
Tue Jul 2 22:40:27 2024 user.notice smp_affinity: Pinning IRQ(34) edma_txcmpl to CPU 3
Tue Jul 2 22:40:27 2024 user.notice smp_affinity: Pinning IRQ(35) edma_rxfill to CPU 3
Tue Jul 2 22:40:27 2024 user.notice smp_affinity: Pinning IRQ(36) edma_rxdesc to CPU 3
Tue Jul 2 22:40:27 2024 user.notice smp_affinity: Pinning IRQ(37) edma_misc to CPU 3
Tue Jul 2 22:40:28 2024 kern.info kernel: [ 13.665081] br-lan: port 1(lan1) entered blocking state
Tue Jul 2 22:40:28 2024 kern.info kernel: [ 13.665129] br-lan: port 1(lan1) entered disabled state
Tue Jul 2 22:40:28 2024 kern.info kernel: [ 13.669157] nss-dp 3a001400.dp3 lan1: entered allmulticast mode
Tue Jul 2 22:40:28 2024 daemon.notice netifd: Interface 'lan' is enabled
Tue Jul 2 22:40:28 2024 daemon.notice netifd: Interface 'lan' is setting up now
Tue Jul 2 22:40:28 2024 kern.info kernel: [ 13.674679] nss-dp 3a001400.dp3 lan1: entered promiscuous mode
Tue Jul 2 22:40:28 2024 daemon.notice netifd: Interface 'lan' is now up
Tue Jul 2 22:40:28 2024 kern.info kernel: [ 13.689410] br-lan: port 2(lan2) entered blocking state
Tue Jul 2 22:40:28 2024 kern.info kernel: [ 13.689455] br-lan: port 2(lan2) entered disabled state
Tue Jul 2 22:40:28 2024 kern.info kernel: [ 13.693536] nss-dp 3a001600.dp4 lan2: entered allmulticast mode
Tue Jul 2 22:40:28 2024 kern.info kernel: [ 13.698898] nss-dp 3a001600.dp4 lan2: entered promiscuous mode
Tue Jul 2 22:40:28 2024 kern.info kernel: [ 13.708908] br-lan: port 3(lan3) entered blocking state
Tue Jul 2 22:40:28 2024 kern.info kernel: [ 13.710467] br-lan: port 3(lan3) entered disabled state
Tue Jul 2 22:40:28 2024 kern.info kernel: [ 13.715692] nss-dp 3a001800.dp5 lan3: entered allmulticast mode
Tue Jul 2 22:40:28 2024 kern.info kernel: [ 13.721009] nss-dp 3a001800.dp5 lan3: entered promiscuous mode
Tue Jul 2 22:40:28 2024 daemon.notice netifd: Interface 'loopback' is enabled
Tue Jul 2 22:40:28 2024 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Jul 2 22:40:28 2024 daemon.notice netifd: Interface 'loopback' is now up
Tue Jul 2 22:40:28 2024 daemon.notice netifd: Interface 'wan' is enabled
Tue Jul 2 22:40:28 2024 daemon.notice netifd: Interface 'wan6' is enabled
Tue Jul 2 22:40:28 2024 daemon.notice netifd: Network device 'lo' link is up
Tue Jul 2 22:40:28 2024 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Jul 2 22:40:28 2024 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Jul 2 22:40:28 2024 daemon.notice procd: /etc/rc.d/S99bootcount: Boot count sucessfully reset to zero.
Tue Jul 2 22:40:28 2024 daemon.info procd: - init complete -
Tue Jul 2 22:40:32 2024 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Tue Jul 2 22:40:32 2024 daemon.err procd: Got unexpected signal 1
Tue Jul 2 22:40:32 2024 daemon.info dnsmasq[1]: started, version 2.90 cachesize 1000
Tue Jul 2 22:40:32 2024 daemon.info dnsmasq[1]: DNS service limited to local subnets
Tue Jul 2 22:40:32 2024 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Tue Jul 2 22:40:32 2024 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Tue Jul 2 22:40:32 2024 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Tue Jul 2 22:40:32 2024 daemon.info dnsmasq[1]: using only locally-known addresses for test
Tue Jul 2 22:40:32 2024 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Tue Jul 2 22:40:32 2024 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Tue Jul 2 22:40:32 2024 daemon.info dnsmasq[1]: using only locally-known addresses for local
Tue Jul 2 22:40:32 2024 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Tue Jul 2 22:40:32 2024 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Tue Jul 2 22:40:32 2024 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Tue Jul 2 22:40:32 2024 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Tue Jul 2 22:40:32 2024 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Jul 2 22:40:32 2024 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Tue Jul 2 22:40:32 2024 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Tue Jul 2 22:40:33 2024 kern.info kernel: [ 18.872690] nss-dp 3a001600.dp4 lan2: PHY Link up speed: 1000
Tue Jul 2 22:40:33 2024 kern.info kernel: [ 18.872776] br-lan: port 2(lan2) entered blocking state
Tue Jul 2 22:40:33 2024 kern.info kernel: [ 18.877426] br-lan: port 2(lan2) entered forwarding state
Tue Jul 2 22:40:33 2024 daemon.notice netifd: Network device 'lan2' link is up
Tue Jul 2 22:40:33 2024 daemon.notice netifd: bridge 'br-lan' link is up
Tue Jul 2 22:40:33 2024 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Jul 2 22:40:34 2024 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Jul 2 22:40:34 2024 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Tue Jul 2 22:40:34 2024 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addressesOdp: Linksys WHW01 (Velop)
Na jakim sofcie testujecie dump AP?
Ja mam Google wifi ac1304. To chyba ten sam SoC i chyba coś źle sprawdzam.
Speedtest.net jako router wyciąga pełne 500mbit łącza.
Jak testuje jako dump AP iperf3 to 250mbit tylko.
Iperf3 -c odpalam na tym samym kliencie a iperf3 -s działa na proxmox po LAN. Po kablu 940mbit więc to nie jest kwestia serwera.
Odp: Linksys WHW01 (Velop)
Ja podawałem iperfem, serwerem był mój router, velop głupim ap, klientem iperf był laptop podłączony przez velopa.
Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.
Odp: Linksys WHW01 (Velop)
OK, już wiem dlaczego iperf3 podawał tylko 250mbit
Jak odpalam iperf3 -s -P x gdzie X to ilość jednoczesnych połączeń do wtedy WiFi speed skacze do 550 Mbit.
Czy to poprawna metoda testowania?
Odp: Linksys WHW01 (Velop)
To już pytanie do Ciebie czy chciałeś to testować na X równoległych połączeń czy nie. Tu nie ma odpowiedzi czy to jest poprawne czy nie, zależy co chciałeś osiągnąć.
Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.
Odp: Linksys WHW01 (Velop)
Jasne, zastanawia mnie tylko dlaczego speed test.net pobiera pełną prędkością zestawionego połączenia wifi a iperf3 tylko połowa.
Jednocześnie piszecie, że na podobnym sprzęcie iperf u Was leci pełną prędkością a u mnie taki dziwne zachowanie
Odp: Linksys WHW01 (Velop)
kacperr napisał/a:
Jasne, zastanawia mnie tylko dlaczego speed test.net pobiera pełną prędkością zestawionego połączenia wifi a iperf3 tylko połowa.
Jednocześnie piszecie, że na podobnym sprzęcie iperf u Was leci pełną prędkością a u mnie taki dziwne zachowanie
Jakbys nie zauwazyl to masz tam klik, zmiany jendo połączenie vs wiele połączeń a to drugie jest z automatu.
Dom : router https://i.imgur.com/IuB6Zwy.png | TP-LINK T1700G-28TQ |Zyxel XGS-1210-12 | 6x Ruckus r310 unleashed + Ruckus icx7150-c12p | Truenas scale 124TB 25Gb| Xpenology 12TB | apc smart ups 750 lcd 100Mb/s - 25Gb/s
Podróżne : GL.Inet MT3000 +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip + panel 285Wp + lifepo4 12v 60Ah .
100Mb/s - 25Gb/sPodróżne : GL.Inet MT3000 +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip + panel 285Wp + lifepo4 12v 60Ah .
38 2024-07-27 16:28:05 (edytowany przez aczo 2024-07-28 09:25:55)
Odp: Linksys WHW01 (Velop)
Bardzo fajne urządzonko, kupiłem komplet 3 sztuk i świetnie się sprawują jako acess pointy podpięte po kablu. Jeden lub dwa mam zamiar wymienić wkrótce na D-Link COVR-X1862 802.11ax, podobne, ale już z obslugą ax i też OpenWrt wspierają.
Dzięki za hint dot. diod - na pewno się przyda, na razie w sypialni wyłączyłem na stałe, a tak, zrobi się na cron w dzień dyskotekę, a w nocy off.
Odp: Linksys WHW01 (Velop)
Cześć,
nie chce nowego tematu zakładać - trochę bardziej przerośnięte rodzeństwo Velopów dotarło: Atlas - MX8500. Już nie tak atrakcyjna cena jak w tym poście:
https://eko.one.pl/forum/viewtopic.php? … 56#p315156
Kupione u sprzedawcy mobileshark ale tam doliczyli podatek przy zakupie z LasVegas do Chicago - na miejscu nic nie było. W sumie za komplet 3 sztuk wyszło 780zł. Górne wiczko podważamy nożykiem do tapet,a potem piórkiem do otwierania obudów i zatrzaski schodzą.
Czegoś takiego nie widziałem - kanapka dwóch płytek i między nimi też aluminiowa blacha, radiatory z obu stron - dalej nie rozbieram bo to chyba na paście, a pasuje na termopadach złożyć których nie mam i nie wiem jak te płytki są połączone między sobą.
Zasilacz to Ktec KSAS0501200400HU z wtyczką 6,5/3mm, jest odpowiednik KSAS0501200400HE.
OpenWRT jak będzie coś więcej czasu, potem ląduje u docelowego klienta który czeka z kartą AX.
Odp: Linksys WHW01 (Velop)
Tutaj możesz zobaczyć jak dokładnie jest zbudowany MX8500:
- https://fcc.report/FCC-ID/K7S-03685/5166311.pdf
- https://fcc.report/FCC-ID/K7S-03685/5166312.pdf
- https://fcc.report/FCC-ID/K7S-03685/5166313.pdf
Linksys MX5300 (pierwszy z serii na IPQ807x) ma jeszcze większe radiatory:
- https://fcc.report/FCC-ID/Q87-03448/4402574.pdf
- https://fcc.report/FCC-ID/Q87-03448/4402569.pdf
A MX4200/MX4300 mają już tylko znacznie mniejsze radiatory z jednej strony.
Odp: Linksys WHW01 (Velop)
Te pierwsze które opisywałem były fajnymi małymi urządzeniami. A te to już spore potwory.
Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.
Odp: Linksys WHW01 (Velop)
Cezary napisał/a:
Te pierwsze które opisywałem były fajnymi małymi urządzeniami. A te to już spore potwory.
No lepiej żeby miały solidne chlodzenie pasywne niż małe wyjące wentylatorki 
a z kolei tp-link be550/800 wsio top be się zapowiada niemały.
Dom : router https://i.imgur.com/IuB6Zwy.png | TP-LINK T1700G-28TQ |Zyxel XGS-1210-12 | 6x Ruckus r310 unleashed + Ruckus icx7150-c12p | Truenas scale 124TB 25Gb| Xpenology 12TB | apc smart ups 750 lcd 100Mb/s - 25Gb/s
Podróżne : GL.Inet MT3000 +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip + panel 285Wp + lifepo4 12v 60Ah .
100Mb/s - 25Gb/sPodróżne : GL.Inet MT3000 +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip + panel 285Wp + lifepo4 12v 60Ah .
Odp: Linksys WHW01 (Velop)
ambrozy5 napisał/a:
No lepiej żeby miały solidne chlodzenie pasywne niż małe wyjące wentylatorki
Szału nie ma: https://fcc.report/FCC-ID/2AXJ4BE550/6599501.pdf
Odp: Linksys WHW01 (Velop)
Dziękuję za pdf-y z fcc. Złącze krawędziowe między płytkami - nie będzie problemów. Sił starczyło na wgranie:
BusyBox v1.36.1 (2025-04-26 18:53:51 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------------------------------
| |
| OpenWrt 24.10-SNAPSHOT, r28627-0b392b925f |
| |
| Build time: 2025-05-01 07:16 UTC |
| Cezary Jackiewicz, https://eko.one.pl |
| |
-----------------------------------------------------------------------------
| Machine: Linksys MX8500 |
| Uptime: 0d, 00:01:08 |
| Load: 0.17 0.07 0.02 |
| Flash: total: 106.5MB, free: 85.2MB, used: 16% |
| Memory: total: 866.7MB, free: 645.3MB, used: 25% |
| Leases: 0 |
| lan: static, 192.168.1.1 |
| wan: dhcp, ? |
| wan6: dhcpv6, ? |
-----------------------------------------------------------------------------
| CPU freq: 2.21GHz, 2.21GHz, 2.21GHz, 1.65GHz |
-----------------------------------------------------------------------------
Pierwszy start:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.6.86 (cezary@eko.one.pl) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28010-49d8f4b833) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Sat Apr 26 18:53:51 2025
[ 0.000000] Machine model: Linksys MX8500
[ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable nss@40000000
[ 0.000000] OF: reserved mem: 0x000000004a400000..0x000000004a5fffff (2048 KiB) nomap non-reusable tzapp@4a400000
[ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable bootloader@4a600000
[ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable sbl@4aa00000
[ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004abfffff (1024 KiB) nomap non-reusable smem@4ab00000
[ 0.000000] OF: reserved mem: 0x000000004ac00000..0x000000004affffff (4096 KiB) nomap non-reusable memory@4ac00000
[ 0.000000] OF: reserved mem: 0x000000004b000000..0x0000000050efffff (97280 KiB) nomap non-reusable wcnss@4b000000
[ 0.000000] OF: reserved mem: 0x0000000050f00000..0x0000000050ffffff (1024 KiB) nomap non-reusable q6_etr_dump@50f00000
[ 0.000000] OF: reserved mem: 0x0000000051000000..0x00000000510fffff (1024 KiB) nomap non-reusable m3_dump@51000000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff]
[ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff]
[ 0.000000] node 0: [mem 0x000000004a400000-0x00000000510fffff]
[ 0.000000] node 0: [mem 0x0000000051100000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 18 pages/cpu s36136 r8192 d29400 u73728
[ 0.000000] pcpu-alloc: s36136 r8192 d29400 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=alt_rootfs root=ubi0:ubifs rootfstype=ubifs rootwait swiotlb=1 root=/dev/ubiblock0_0 rootfstype=squashfs ro
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB
[ 0.000000] software IO TLB: mapped [mem 0x000000007eb00000-0x000000007ec00000] (1MB)
[ 0.000000] Memory: 885944K/1048576K available (8576K kernel code, 922K rwdata, 1660K rodata, 1600K init, 293K bss, 162632K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: 0xffffffc080010000
[ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000112] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000125] pid_max: default: 32768 minimum: 301
[ 0.005085] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.005099] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.009356] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.009583] rcu: Hierarchical SRCU implementation.
[ 0.009588] rcu: Max phase no-delay instances is 1000.
[ 0.010547] smp: Bringing up secondary CPUs ...
[ 0.011212] Detected VIPT I-cache on CPU1
[ 0.011315] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.011985] Detected VIPT I-cache on CPU2
[ 0.012058] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.012717] Detected VIPT I-cache on CPU3
[ 0.012782] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.012851] smp: Brought up 1 node, 4 CPUs
[ 0.012860] SMP: Total of 4 processors activated.
[ 0.012865] CPU features: detected: 32-bit EL0 Support
[ 0.012869] CPU features: detected: CRC32 instructions
[ 0.012930] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.012936] CPU: All CPU(s) started at EL1
[ 0.012939] alternatives: applying system-wide alternatives
[ 0.024591] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.024618] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.026347] pinctrl core: initialized pinctrl subsystem
[ 0.028425] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.029044] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.029083] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.029117] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.029531] thermal_sys: Registered thermal governor 'step_wise'
[ 0.029591] cpuidle: using governor menu
[ 0.029817] ASID allocator initialised with 65536 entries
[ 0.037309] /soc@0/phy@84000/phy@84200: Fixed dependency cycle(s) with /soc@0/gcc@1800000
[ 0.037391] /soc@0/gcc@1800000: Fixed dependency cycle(s) with /soc@0/phy@84000/phy@84200
[ 0.038047] /soc@0/phy@84000: Fixed dependency cycle(s) with /soc@0/gcc@1800000
[ 0.038065] /soc@0/phy@84000/phy@84200: Fixed dependency cycle(s) with /soc@0/gcc@1800000
[ 0.040217] /soc@0/phy@84000/phy@84200: Fixed dependency cycle(s) with /soc@0/gcc@1800000
[ 0.040301] /soc@0/phy@84000: Fixed dependency cycle(s) with /soc@0/gcc@1800000
[ 0.040441] /soc@0/gcc@1800000: Fixed dependency cycle(s) with /soc@0/phy@84000/phy@84200
[ 0.057546] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 0.059815] Modules: 29456 pages in range for non-PLT usage
[ 0.059823] Modules: 520976 pages in range for PLT usage
[ 0.063476] SCSI subsystem initialized
[ 0.063676] usbcore: registered new interface driver usbfs
[ 0.063709] usbcore: registered new interface driver hub
[ 0.063762] usbcore: registered new device driver usb
[ 0.064222] qcom_scm: convention: smc arm 64
[ 0.065972] clocksource: Switched to clocksource arch_sys_counter
[ 0.069912] NET: Registered PF_INET protocol family
[ 0.070058] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.072945] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.072970] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.072985] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.073072] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.073344] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.073839] MPTCP token hash table entries: 1024 (order: 2, 24576 bytes, linear)
[ 0.074012] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.074050] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.074605] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.074656] PCI: CLS 0 bytes, default 64
[ 0.076404] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.077139] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.077146] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.080979] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.084477] qcom-qmp-usb-phy 78000.phy: supply vdda-phy not found, using dummy regulator
[ 0.084663] qcom-qmp-usb-phy 78000.phy: supply vdda-pll not found, using dummy regulator
[ 0.085893] qcom-qusb2-phy 79000.phy: supply vdd not found, using dummy regulator
[ 0.086093] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator
[ 0.086139] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator
[ 0.086307] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
[ 0.088344] gpio-export gpio_export: 1 gpio(s) exported
[ 0.089639] qcom-pcie 20000000.pci: host bridge /soc@0/pci@20000000 ranges:
[ 0.089699] qcom-pcie 20000000.pci: IO 0x0020200000..0x002020ffff -> 0x0000000000
[ 0.089726] qcom-pcie 20000000.pci: MEM 0x0020220000..0x002fffffff -> 0x0020220000
[ 0.095580] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.099684] msm_serial 78b1000.serial: msm_serial: detected port #1
[ 0.099726] msm_serial 78b1000.serial: uartclk = 19200000
[ 0.100079] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 20, base_baud = 1200000) is a MSM
[ 0.100545] msm_serial 78b3000.serial: msm_serial: detected port #0
[ 0.100581] msm_serial 78b3000.serial: uartclk = 3686400
[ 0.100915] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 22, base_baud = 230400) is a MSM
[ 0.100947] msm_serial: console setup on port #0
[ 0.100989] printk: console [ttyMSM0] enabled
[ 0.227516] qcom-pcie 20000000.pci: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 1024G
[ 0.229420] msm_serial: driver initialized
[ 0.325969] qcom-pcie 20000000.pci: PCIe Gen.3 x1 link up
[ 1.004667] qcom-pcie 20000000.pci: PCI host bridge to bus 0000:00
[ 1.009638] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.015700] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 1.021176] pci_bus 0000:00: root bus resource [mem 0x20220000-0x2fffffff]
[ 1.027368] pci 0000:00:00.0: [17cb:1002] type 01 class 0x060400
[ 1.034199] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 1.040418] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.050304] pci 0000:01:00.0: [17cb:1104] type 00 class 0x028000
[ 1.052676] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 1.059187] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.065494] pci 0000:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[ 1.071934] pci 0000:00:00.0: BAR 8: assigned [mem 0x20400000-0x205fffff]
[ 1.086207] pci 0000:00:00.0: BAR 0: assigned [mem 0x20220000-0x20220fff]
[ 1.093139] pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit]
[ 1.099952] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 1.107027] pci 0000:00:00.0: bridge window [mem 0x20400000-0x205fffff]
[ 1.114992] pcieport 0000:00:00.0: PME: Signaling with IRQ 24
[ 1.119497] pcieport 0000:00:00.0: AER: enabled with IRQ 24
[ 1.124294] loop: module loaded
[ 1.131696] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xac
[ 1.133408] nand: Hynix H27S4G8F2EDA-BC
[ 1.140129] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[ 1.144030] 30 fixed-partitions partitions found on MTD device qcom_nand.0
[ 1.151263] Creating 30 MTD partitions on "qcom_nand.0":
[ 1.158157] 0x000000000000-0x000000100000 : "0:sbl1"
[ 1.165175] 0x000000100000-0x000000200000 : "0:mibib"
[ 1.170042] 0x000000200000-0x000000280000 : "0:bootconfig"
[ 1.174465] 0x000000280000-0x000000300000 : "0:bootconfig1"
[ 1.179989] 0x000000300000-0x000000600000 : "0:qsee"
[ 1.187812] 0x000000600000-0x000000900000 : "0:qsee_1"
[ 1.192834] 0x000000900000-0x000000980000 : "0:devcfg"
[ 1.195492] 0x000000980000-0x000000a00000 : "0:devcfg_1"
[ 1.200643] 0x000000a00000-0x000000a80000 : "0:apdp"
[ 1.206130] 0x000000a80000-0x000000b00000 : "0:apdp_1"
[ 1.211062] 0x000000b00000-0x000000b80000 : "0:rpm"
[ 1.216033] 0x000000b80000-0x000000c00000 : "0:rpm_1"
[ 1.220807] 0x000000c00000-0x000000c80000 : "0:cdt"
[ 1.226021] 0x000000c80000-0x000000d00000 : "0:cdt_1"
[ 1.230722] 0x000000d00000-0x000000d80000 : "0:appsblenv"
[ 1.235900] 0x000000d80000-0x000000e80000 : "0:appsbl"
[ 1.241774] 0x000000e80000-0x000000f80000 : "0:appsbl_1"
[ 1.246766] 0x000000f80000-0x000001000000 : "0:art"
[ 1.251747] 0x000001000000-0x000001040000 : "u_env"
[ 1.256121] 0x000001040000-0x000001060000 : "s_env"
[ 1.260902] 0x000001060000-0x000001080000 : "devinfo"
[ 1.265772] 0x000001080000-0x00000a680000 : "kernel"
[ 1.412595] 0x000001680000-0x00000a680000 : "rootfs"
[ 1.549100] mtd: setting mtd22 (rootfs) as root device
[ 1.549464] mtdsplit: no squashfs found in "rootfs"
[ 1.553147] 0x00000a680000-0x000013c80000 : "alt_kernel"
[ 1.700035] 0x00000ac80000-0x000013c80000 : "alt_rootfs"
[ 1.836440] 0x000013c80000-0x000013e80000 : "sysdiag"
[ 1.838829] 0x000013e80000-0x000013f80000 : "0:ethphyfw"
[ 1.842238] 0x000013f80000-0x00001f100000 : "syscfg"
[ 2.014064] 0x00001f100000-0x00001f600000 : "app_data"
[ 2.019322] 0x00001f600000-0x000020000000 : "0:wififw"
[ 2.040114] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[ 2.060756] mdio_bus 90000.mdio-1: MDIO device at address 8 is missing.
[ 2.061401] i2c_dev: i2c /dev entries driver
[ 2.073671] sdhci: Secure Digital Host Controller Interface driver
[ 2.073716] sdhci: Copyright(c) Pierre Ossman
[ 2.078773] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.085043] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
[ 2.091812] NET: Registered PF_INET6 protocol family
[ 2.095548] Segment Routing with IPv6
[ 2.099836] In-situ OAM (IOAM) with IPv6
[ 2.103397] NET: Registered PF_PACKET protocol family
[ 2.107377] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.112598] 8021q: 802.1Q VLAN Support v1.8
[ 2.154569] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 2.154895] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[ 2.160746] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
[ 2.167323] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[ 2.174958] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[ 2.182490] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[ 2.191626] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 712000 uV
[ 2.198570] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 840000 uV
[ 2.208551] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 904000 uV
[ 2.218353] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 992000 uV
[ 2.228206] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 715, quot_offset[ 7]= 0
[ 2.237969] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 956, quot_offset[ 7]= 240
[ 2.248819] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1062, quot_offset[ 7]= 105
[ 2.259755] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1216, quot_offset[ 7]= 150
[ 2.270911] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[ 2.273976] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz
[ 2.290322] remoteproc remoteproc0: cd00000.q6v5_wcss is available
[ 2.299423] ubi0: attaching mtd24
[ 2.565983] random: crng init done
[ 2.820769] ubi0: scanning is finished
[ 2.845614] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 969 LEBs
[ 2.846130] ubi0: attached mtd24 (name "alt_rootfs", size 144 MiB)
[ 2.851035] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.857206] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.864056] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.870916] ubi0: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 2.877685] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 2.883934] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1745693631
[ 2.891061] ubi0: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 80
[ 2.900356] ubi0: background thread "ubi_bgt0d" started, PID 736
[ 2.909938] block ubiblock0_0: created from ubi0:0(rootfs)
[ 2.915722] clk: Disabling unused clocks
[ 2.941209] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.941725] Freeing unused kernel memory: 1600K
[ 2.947551] Run /sbin/init as init process
[ 2.951664] with arguments:
[ 2.951666] /sbin/init
[ 2.951669] with environment:
[ 2.951671] HOME=/
[ 2.951674] TERM=linux
[ 3.398885] init: Console is alive
[ 3.399051] init: - watchdog -
[ 5.401915] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 5.485840] gpio_button_hotplug: loading out-of-tree module taints kernel.
[ 5.554672] ssdk_dt_parse_interrupt[941]:INFO:intr-gpio does not exist
[ 5.608642] ssdk_phy_driver_init[341]:INFO:dev_id = 0, phy_adress = 8, phy_id = 0xffffffff phytype doesn't match
[ 6.886045] regi_init[2525]:INFO:Initializing HPPE Done!!
[ 6.886169] regi_init[2574]:INFO:qca-ssdk module init succeeded!
[ 6.892298] EDMA ver 1 hw init
[ 6.896753] EDMA HW Reset completed succesfully
[ 6.899400] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
[ 6.903796] RxDesc:1 (15-15) RxFill:1 (7-7)
[ 6.909334] GMAC1(ffffff800230a940) Invalid MAC@ - using 86:19:d1:c4:3e:b6
[ 6.913176] dp1: ppe offload disabled: 0 for macid 1
[ 6.920131] dp1: Switch attached to macid 1 status: 0
[ 7.116736] Qualcomm QCA8075 90000.mdio-1:00: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:00, irq=POLL)
[ 7.117592] GMAC2(ffffff8002d48940) Invalid MAC@ - using 32:55:31:b9:14:39
[ 7.125633] dp2: ppe offload disabled: 0 for macid 2
[ 7.132508] dp2: Switch attached to macid 2 status: 0
[ 7.206334] Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL)
[ 7.207167] GMAC3(ffffff8002f01940) Invalid MAC@ - using 3e:5f:e8:40:a4:11
[ 7.215228] dp3: ppe offload disabled: 0 for macid 3
[ 7.222102] dp3: Switch attached to macid 3 status: 0
[ 7.306329] Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL)
[ 7.307217] GMAC4(ffffff8002f05940) Invalid MAC@ - using f2:2f:05:5b:41:14
[ 7.315224] dp4: ppe offload disabled: 0 for macid 4
[ 7.322100] dp4: Switch attached to macid 4 status: 0
[ 7.396332] Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL)
[ 7.397194] GMAC6(ffffff8002815940) Invalid MAC@ - using 26:4d:29:4b:7b:c8
[ 7.405226] dp6-syn: ppe offload disabled: 0 for macid 6
[ 7.412106] dp6-syn: Switch attached to macid 6 status: 0
[ 7.417602] nss-dp 3a007000.dp6-syn wan (uninitialized): failed to connect to phy device
[ 7.422871] nss-dp: probe of 3a007000.dp6-syn failed with error -14
[ 7.431102] **********************************************************
[ 7.436999] * NSS Data Plane driver
[ 7.443584] **********************************************************
[ 7.459123] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 7.459172] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 7.463632] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002000010
[ 7.471125] xhci-hcd xhci-hcd.1.auto: irq 43, io mem 0x08a00000
[ 7.480535] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 7.486343] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 7.491902] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 7.500021] hub 1-0:1.0: USB hub found
[ 7.506158] hub 1-0:1.0: 1 port detected
[ 7.510105] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 7.514119] hub 2-0:1.0: USB hub found
[ 7.522000] hub 2-0:1.0: 1 port detected
[ 7.529725] usbcore: registered new interface driver usb-storage
[ 7.530584] usbcore: registered new interface driver uas
[ 7.535753] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 7.550194] init: - preinit -
[ 8.064287] mtdblock: MTD device 'devinfo' is NAND, please consider using UBI block devices instead.
[ 12.605850] mount_root: loading kmods from internal overlay
[ 12.619138] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 12.620385] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 12.663073] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[ 12.741993] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 12.742150] block: unable to load configuration (fstab: Entry not found)
[ 12.748184] block: attempting to load /tmp/overlay/etc/config/fstab
[ 12.754613] block: unable to load configuration (fstab: Entry not found)
[ 12.760587] block: attempting to load /etc/config/fstab
[ 12.770679] block: unable to load configuration (fstab: Entry not found)
[ 12.772464] block: no usable configuration
[ 12.790994] UBIFS (ubi0:1): default file-system created
[ 12.791614] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 12.795110] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 1024
[ 12.861551] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 12.861592] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 12.868388] UBIFS (ubi0:1): FS size: 121643008 bytes (116 MiB, 958 LEBs), max 969 LEBs, journal size 6094848 bytes (5 MiB, 48 LEBs)
[ 12.878280] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 12.889900] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 81D1C313-9A3B-4681-8F0E-068681003F4C, small LPT model
[ 12.897350] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 12.908131] block: unable to load configuration (fstab: Entry not found)
[ 12.914779] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[ 12.921773] block: unable to load configuration (fstab: Entry not found)
[ 12.928056] block: attempting to load /etc/config/fstab
[ 12.934829] block: unable to load configuration (fstab: Entry not found)
[ 12.939772] block: no usable configuration
[ 12.949464] UBIFS (ubi0:1): un-mount UBI device 0
[ 12.950578] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 12.959339] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 12.961501] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 1027
[ 13.026978] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 13.027022] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 13.033802] UBIFS (ubi0:1): FS size: 121643008 bytes (116 MiB, 958 LEBs), max 969 LEBs, journal size 6094848 bytes (5 MiB, 48 LEBs)
[ 13.043719] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 13.055332] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 81D1C313-9A3B-4681-8F0E-068681003F4C, small LPT model
[ 13.067809] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[ 13.095372] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 13.095500] block: unable to load configuration (fstab: Entry not found)
[ 13.101216] block: attempting to load /tmp/overlay/etc/config/fstab
[ 13.108137] block: unable to load configuration (fstab: Entry not found)
[ 13.113986] block: attempting to load /etc/config/fstab
[ 13.121053] block: unable to load configuration (fstab: Entry not found)
[ 13.125830] block: no usable configuration
[ 13.134022] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 13.136982] block: unable to load configuration (fstab: Entry not found)
[ 13.143538] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[ 13.150609] block: unable to load configuration (fstab: Entry not found)
[ 13.156885] block: attempting to load /etc/config/fstab
[ 13.163595] block: unable to load configuration (fstab: Entry not found)
[ 13.168537] block: no usable configuration
[ 13.176718] mount_root: overlay filesystem has not been fully initialized yet
[ 13.179652] mount_root: switching to ubifs overlay
[ 13.191198] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 13.195613] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 13.225814] procd: - early -
[ 13.225899] procd: - watchdog -
[ 13.771498] procd: - watchdog -
[ 13.773535] procd: - ubus -
[ 13.927177] procd: - init -
[ 14.167239] kmodloader: loading kernel modules from /etc/modules.d/*
[ 14.271801] urngd: v1.0.2 started.
[ 14.274049] OpenVPN data channel offload (ovpn-dco) 2.0.0 -- (C) 2020-2023 OpenVPN, Inc.
[ 14.276195] tun: Universal TUN/TAP device driver, 1.6
[ 14.295500] hid: raw HID events driver (C) Jiri Kosina
[ 14.298584] ntfs3: Enabled Linux POSIX ACLs support
[ 14.312599] Bluetooth: Core ver 2.22
[ 14.312736] NET: Registered PF_BLUETOOTH protocol family
[ 14.315248] Bluetooth: HCI device and connection manager initialized
[ 14.320577] Bluetooth: HCI socket layer initialized
[ 14.326887] Bluetooth: L2CAP socket layer initialized
[ 14.331493] Bluetooth: SCO socket layer initialized
[ 14.337553] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.341377] Bluetooth: BNEP filters: protocol multicast
[ 14.346951] Bluetooth: BNEP socket layer initialized
[ 14.355117] usbcore: registered new interface driver btusb
[ 14.357952] usbcore: registered new interface driver cdc_acm
[ 14.362386] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 14.368970] usbcore: registered new interface driver cdc_wdm
[ 14.376403] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a
[ 14.381833] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2
[ 14.389927] Bluetooth: HCI UART driver ver 2.3
[ 14.395994] Bluetooth: HCI UART protocol H4 registered
[ 14.400489] Bluetooth: HCI UART protocol BCSP registered
[ 14.405613] Bluetooth: HCI UART protocol ATH3K registered
[ 14.411844] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 14.416405] Bluetooth: HIDP socket layer initialized
[ 14.429895] NET: Registered PF_QIPCRTR protocol family
[ 14.431992] Bluetooth: RFCOMM TTY layer initialized
[ 14.433936] Bluetooth: RFCOMM socket layer initialized
[ 14.438745] Bluetooth: RFCOMM ver 1.11
[ 14.445887] usbcore: registered new interface driver usblp
[ 14.450695] usbcore: registered new interface driver usbserial_generic
[ 14.453149] usbserial: USB Serial support registered for generic
[ 14.460400] usbcore: registered new interface driver cdc_ether
[ 14.466690] usbcore: registered new interface driver cdc_ncm
[ 14.479853] usbcore: registered new interface driver huawei_cdc_ncm
[ 14.555442] PPP generic driver version 2.4.2
[ 14.556358] NET: Registered PF_PPPOX protocol family
[ 14.559667] usbcore: registered new interface driver qmi_wwan
[ 14.564614] usbcore: registered new interface driver rndis_host
[ 14.570083] usbcore: registered new interface driver sierra
[ 14.575136] usbserial: USB Serial support registered for Sierra USB modem
[ 14.583130] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 14.587621] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 14.603853] ath11k c000000.wifi: ipq8074 hw2.0
[ 14.604961] ath11k c000000.wifi: FW memory mode: 0
[ 14.641797] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
[ 14.646747] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[ 15.795119] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
[ 15.838805] ath11k c000000.wifi: qmi ignore invalid mem req type 3
[ 15.846275] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
[ 15.846313] ath11k c000000.wifi: fw_version 0x290b84a5 fw_build_timestamp 2024-09-23 11:32 fw_build_id WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
[ 16.118545] remoteproc remoteproc0: stopped remote processor cd00000.q6v5_wcss
[ 16.118589] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
[ 16.124752] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[ 16.474790] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
[ 16.477183] ath11k_pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit]
[ 16.481319] ath11k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 16.489537] ath11k_pci 0000:01:00.0: MSI vectors: 16
[ 16.495166] ath11k_pci 0000:01:00.0: qcn9074 hw1.0
[ 16.500364] ath11k_pci 0000:01:00.0: FW memory mode: 2
[ 16.518676] ath11k c000000.wifi: qmi ignore invalid mem req type 3
[ 16.526118] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
[ 16.526167] ath11k c000000.wifi: fw_version 0x290b84a5 fw_build_timestamp 2024-09-23 11:32 fw_build_id WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
[ 16.688356] mhi mhi0: Requested to power ON
[ 16.688406] mhi mhi0: Power on setup success
[ 16.835088] ath11k c000000.wifi: htt event 48 not handled
[ 17.415997] mhi mhi0: Wait for device to enter SBL or Mission mode
[ 17.466253] usbcore: registered new interface driver cdc_mbim
[ 17.468078] usbcore: registered new interface driver option
[ 17.471028] usbserial: USB Serial support registered for GSM modem (1-port)
[ 17.480863] usbcore: registered new interface driver qcserial
[ 17.482935] ath11k_pci 0000:01:00.0: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
[ 17.483362] usbserial: USB Serial support registered for Qualcomm USB modem
[ 17.489233] ath11k_pci 0000:01:00.0: fw_version 0x290b8862 fw_build_timestamp 2024-09-23 10:51 fw_build_id
[ 17.498341] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 18.077079] ath11k_pci 0000:01:00.0: htt event 48 not handled
[ 18.718578] mtdblock: MTD device 'devinfo' is NAND, please consider using UBI block devices instead.
[ 20.372070] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[ 23.077136] br-lan: port 1(lan1) entered blocking state
[ 23.077178] br-lan: port 1(lan1) entered disabled state
[ 23.081213] nss-dp 3a001000.dp1 lan1: entered allmulticast mode
[ 23.086581] nss-dp 3a001000.dp1 lan1: entered promiscuous mode
[ 23.099171] br-lan: port 2(lan2) entered blocking state
[ 23.099215] br-lan: port 2(lan2) entered disabled state
[ 23.103356] nss-dp 3a001200.dp2 lan2: entered allmulticast mode
[ 23.108802] nss-dp 3a001200.dp2 lan2: entered promiscuous mode
[ 23.117070] br-lan: port 3(lan3) entered blocking state
[ 23.120328] br-lan: port 3(lan3) entered disabled state
[ 23.125483] nss-dp 3a001400.dp3 lan3: entered allmulticast mode
[ 23.130921] nss-dp 3a001400.dp3 lan3: entered promiscuous mode
[ 23.138881] br-lan: port 4(lan4) entered blocking state
[ 23.142460] br-lan: port 4(lan4) entered disabled state
[ 23.147630] nss-dp 3a001600.dp4 lan4: entered allmulticast mode
[ 23.152930] nss-dp 3a001600.dp4 lan4: entered promiscuous mode
[ 24.006013] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL
[ 28.326366] nss-dp 3a001400.dp3 lan3: PHY Link up speed: 1000
[ 28.326409] br-lan: port 3(lan3) entered blocking state
[ 28.331092] br-lan: port 3(lan3) entered forwarding stateOdp: Linksys WHW01 (Velop)
Po patchowaniu aqr_fw.mbn:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.6.86 (cezary@eko.one.pl) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28010-49d8f4b833) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Sat Apr 26 18:53:51 2025
[ 0.000000] Machine model: Linksys MX8500
[ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable nss@40000000
[ 0.000000] OF: reserved mem: 0x000000004a400000..0x000000004a5fffff (2048 KiB) nomap non-reusable tzapp@4a400000
[ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable bootloader@4a600000
[ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable sbl@4aa00000
[ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004abfffff (1024 KiB) nomap non-reusable smem@4ab00000
[ 0.000000] OF: reserved mem: 0x000000004ac00000..0x000000004affffff (4096 KiB) nomap non-reusable memory@4ac00000
[ 0.000000] OF: reserved mem: 0x000000004b000000..0x0000000050efffff (97280 KiB) nomap non-reusable wcnss@4b000000
[ 0.000000] OF: reserved mem: 0x0000000050f00000..0x0000000050ffffff (1024 KiB) nomap non-reusable q6_etr_dump@50f00000
[ 0.000000] OF: reserved mem: 0x0000000051000000..0x00000000510fffff (1024 KiB) nomap non-reusable m3_dump@51000000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff]
[ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff]
[ 0.000000] node 0: [mem 0x000000004a400000-0x00000000510fffff]
[ 0.000000] node 0: [mem 0x0000000051100000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 18 pages/cpu s36136 r8192 d29400 u73728
[ 0.000000] pcpu-alloc: s36136 r8192 d29400 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=alt_rootfs root=ubi0:ubifs rootfstype=ubifs rootwait swiotlb=1 root=/dev/ubiblock0_0 rootfstype=squashfs ro
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB
[ 0.000000] software IO TLB: mapped [mem 0x000000007eb00000-0x000000007ec00000] (1MB)
[ 0.000000] Memory: 885944K/1048576K available (8576K kernel code, 922K rwdata, 1660K rodata, 1600K init, 293K bss, 162632K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: 0xffffffc080010000
[ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000113] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000127] pid_max: default: 32768 minimum: 301
[ 0.005085] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.005099] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.009359] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.009583] rcu: Hierarchical SRCU implementation.
[ 0.009588] rcu: Max phase no-delay instances is 1000.
[ 0.010554] smp: Bringing up secondary CPUs ...
[ 0.011220] Detected VIPT I-cache on CPU1
[ 0.011324] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.011992] Detected VIPT I-cache on CPU2
[ 0.012063] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.012720] Detected VIPT I-cache on CPU3
[ 0.012787] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.012856] smp: Brought up 1 node, 4 CPUs
[ 0.012864] SMP: Total of 4 processors activated.
[ 0.012870] CPU features: detected: 32-bit EL0 Support
[ 0.012874] CPU features: detected: CRC32 instructions
[ 0.012934] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.012940] CPU: All CPU(s) started at EL1
[ 0.012943] alternatives: applying system-wide alternatives
[ 0.024597] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.024624] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.026350] pinctrl core: initialized pinctrl subsystem
[ 0.028418] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.029038] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.029077] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.029112] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.029528] thermal_sys: Registered thermal governor 'step_wise'
[ 0.029589] cpuidle: using governor menu
[ 0.029812] ASID allocator initialised with 65536 entries
[ 0.037302] /soc@0/phy@84000/phy@84200: Fixed dependency cycle(s) with /soc@0/gcc@1800000
[ 0.037382] /soc@0/gcc@1800000: Fixed dependency cycle(s) with /soc@0/phy@84000/phy@84200
[ 0.038038] /soc@0/phy@84000: Fixed dependency cycle(s) with /soc@0/gcc@1800000
[ 0.038055] /soc@0/phy@84000/phy@84200: Fixed dependency cycle(s) with /soc@0/gcc@1800000
[ 0.040213] /soc@0/phy@84000/phy@84200: Fixed dependency cycle(s) with /soc@0/gcc@1800000
[ 0.040298] /soc@0/phy@84000: Fixed dependency cycle(s) with /soc@0/gcc@1800000
[ 0.040440] /soc@0/gcc@1800000: Fixed dependency cycle(s) with /soc@0/phy@84000/phy@84200
[ 0.086912] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 0.089184] Modules: 29456 pages in range for non-PLT usage
[ 0.089191] Modules: 520976 pages in range for PLT usage
[ 0.092867] SCSI subsystem initialized
[ 0.093076] usbcore: registered new interface driver usbfs
[ 0.093111] usbcore: registered new interface driver hub
[ 0.093162] usbcore: registered new device driver usb
[ 0.093606] qcom_scm: convention: smc arm 64
[ 0.095379] clocksource: Switched to clocksource arch_sys_counter
[ 0.099320] NET: Registered PF_INET protocol family
[ 0.099476] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.102453] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.102478] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.102493] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.102579] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.102851] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.103349] MPTCP token hash table entries: 1024 (order: 2, 24576 bytes, linear)
[ 0.103522] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.103560] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.104115] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.104157] PCI: CLS 0 bytes, default 64
[ 0.105985] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.106743] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.106749] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.110595] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.114711] qcom-qmp-usb-phy 78000.phy: supply vdda-phy not found, using dummy regulator
[ 0.114851] qcom-qmp-usb-phy 78000.phy: supply vdda-pll not found, using dummy regulator
[ 0.116755] qcom-qusb2-phy 79000.phy: supply vdd not found, using dummy regulator
[ 0.116899] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator
[ 0.116943] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator
[ 0.117124] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
[ 0.119150] gpio-export gpio_export: 1 gpio(s) exported
[ 0.120428] qcom-pcie 20000000.pci: host bridge /soc@0/pci@20000000 ranges:
[ 0.120491] qcom-pcie 20000000.pci: IO 0x0020200000..0x002020ffff -> 0x0000000000
[ 0.120532] qcom-pcie 20000000.pci: MEM 0x0020220000..0x002fffffff -> 0x0020220000
[ 0.128298] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.132221] msm_serial 78b1000.serial: msm_serial: detected port #1
[ 0.132263] msm_serial 78b1000.serial: uartclk = 19200000
[ 0.132615] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 20, base_baud = 1200000) is a MSM
[ 0.133109] msm_serial 78b3000.serial: msm_serial: detected port #0
[ 0.133145] msm_serial 78b3000.serial: uartclk = 3686400
[ 0.133507] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 22, base_baud = 230400) is a MSM
[ 0.133539] msm_serial: console setup on port #0
[ 0.133583] printk: console [ttyMSM0] enabled
[ 0.256925] qcom-pcie 20000000.pci: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 1024G
[ 0.261987] msm_serial: driver initialized
[ 0.355379] qcom-pcie 20000000.pci: PCIe Gen.3 x1 link up
[ 1.037186] qcom-pcie 20000000.pci: PCI host bridge to bus 0000:00
[ 1.042219] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.048301] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 1.053760] pci_bus 0000:00: root bus resource [mem 0x20220000-0x2fffffff]
[ 1.059960] pci 0000:00:00.0: [17cb:1002] type 01 class 0x060400
[ 1.066798] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 1.073003] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.082875] pci 0000:01:00.0: [17cb:1104] type 00 class 0x028000
[ 1.085267] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 1.091779] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.098094] pci 0000:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[ 1.104499] pci 0000:00:00.0: BAR 8: assigned [mem 0x20400000-0x205fffff]
[ 1.118791] pci 0000:00:00.0: BAR 0: assigned [mem 0x20220000-0x20220fff]
[ 1.125745] pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit]
[ 1.132535] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 1.139620] pci 0000:00:00.0: bridge window [mem 0x20400000-0x205fffff]
[ 1.147609] pcieport 0000:00:00.0: PME: Signaling with IRQ 24
[ 1.152093] pcieport 0000:00:00.0: AER: enabled with IRQ 24
[ 1.162968] loop: module loaded
[ 1.164478] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xac
[ 1.166014] nand: Hynix H27S4G8F2EDA-BC
[ 1.172590] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[ 1.176657] 30 fixed-partitions partitions found on MTD device qcom_nand.0
[ 1.183808] Creating 30 MTD partitions on "qcom_nand.0":
[ 1.190753] 0x000000000000-0x000000100000 : "0:sbl1"
[ 1.197763] 0x000000100000-0x000000200000 : "0:mibib"
[ 1.202563] 0x000000200000-0x000000280000 : "0:bootconfig"
[ 1.207120] 0x000000280000-0x000000300000 : "0:bootconfig1"
[ 1.212461] 0x000000300000-0x000000600000 : "0:qsee"
[ 1.220448] 0x000000600000-0x000000900000 : "0:qsee_1"
[ 1.225489] 0x000000900000-0x000000980000 : "0:devcfg"
[ 1.228100] 0x000000980000-0x000000a00000 : "0:devcfg_1"
[ 1.233210] 0x000000a00000-0x000000a80000 : "0:apdp"
[ 1.238891] 0x000000a80000-0x000000b00000 : "0:apdp_1"
[ 1.243630] 0x000000b00000-0x000000b80000 : "0:rpm"
[ 1.248681] 0x000000b80000-0x000000c00000 : "0:rpm_1"
[ 1.253317] 0x000000c00000-0x000000c80000 : "0:cdt"
[ 1.258637] 0x000000c80000-0x000000d00000 : "0:cdt_1"
[ 1.263260] 0x000000d00000-0x000000d80000 : "0:appsblenv"
[ 1.268487] 0x000000d80000-0x000000e80000 : "0:appsbl"
[ 1.274275] 0x000000e80000-0x000000f80000 : "0:appsbl_1"
[ 1.279406] 0x000000f80000-0x000001000000 : "0:art"
[ 1.284307] 0x000001000000-0x000001040000 : "u_env"
[ 1.288755] 0x000001040000-0x000001060000 : "s_env"
[ 1.293454] 0x000001060000-0x000001080000 : "devinfo"
[ 1.298368] 0x000001080000-0x00000a680000 : "kernel"
[ 1.442640] 0x000001680000-0x00000a680000 : "rootfs"
[ 1.577149] mtd: setting mtd22 (rootfs) as root device
[ 1.577511] mtdsplit: no squashfs found in "rootfs"
[ 1.581196] 0x00000a680000-0x000013c80000 : "alt_kernel"
[ 1.726018] 0x00000ac80000-0x000013c80000 : "alt_rootfs"
[ 1.860046] 0x000013c80000-0x000013e80000 : "sysdiag"
[ 1.862415] 0x000013e80000-0x000013f80000 : "0:ethphyfw"
[ 1.865928] 0x000013f80000-0x00001f100000 : "syscfg"
[ 2.034741] 0x00001f100000-0x00001f600000 : "app_data"
[ 2.039916] 0x00001f600000-0x000020000000 : "0:wififw"
[ 2.060694] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[ 2.081699] i2c_dev: i2c /dev entries driver
[ 2.089271] sdhci: Secure Digital Host Controller Interface driver
[ 2.089314] sdhci: Copyright(c) Pierre Ossman
[ 2.094349] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.100795] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
[ 2.107701] NET: Registered PF_INET6 protocol family
[ 2.111183] Segment Routing with IPv6
[ 2.115515] In-situ OAM (IOAM) with IPv6
[ 2.118987] NET: Registered PF_PACKET protocol family
[ 2.122954] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.128237] 8021q: 802.1Q VLAN Support v1.8
[ 2.169777] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 2.170100] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[ 2.175946] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
[ 2.182505] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[ 2.190192] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[ 2.197710] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[ 2.206834] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 712000 uV
[ 2.213759] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 840000 uV
[ 2.223766] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 904000 uV
[ 2.233575] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 992000 uV
[ 2.243434] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 715, quot_offset[ 7]= 0
[ 2.253197] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 956, quot_offset[ 7]= 240
[ 2.264044] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1062, quot_offset[ 7]= 105
[ 2.275008] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1216, quot_offset[ 7]= 150
[ 2.286144] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[ 2.289210] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz
[ 2.305484] remoteproc remoteproc0: cd00000.q6v5_wcss is available
[ 2.314555] ubi0: attaching mtd24
[ 2.555387] random: crng init done
[ 3.143807] ubi0: scanning is finished
[ 3.151965] ubi0: attached mtd24 (name "alt_rootfs", size 144 MiB)
[ 3.152008] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.157065] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.163905] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.170767] ubi0: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 3.177535] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 3.183783] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1745693631
[ 3.190910] ubi0: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 80
[ 3.200204] ubi0: background thread "ubi_bgt0d" started, PID 747
[ 3.200918] block ubiblock0_0: created from ubi0:0(rootfs)
[ 3.215594] clk: Disabling unused clocks
[ 3.224162] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 3.224700] Freeing unused kernel memory: 1600K
[ 3.230457] Run /sbin/init as init process
[ 3.234613] with arguments:
[ 3.234615] /sbin/init
[ 3.234617] with environment:
[ 3.234619] HOME=/
[ 3.234621] TERM=linux
[ 3.407692] init: Console is alive
[ 3.407822] init: - watchdog -
[ 4.371548] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 4.396362] hwmon hwmon0: temp1_input not attached to any thermal zone
[ 4.418862] gpio_button_hotplug: loading out-of-tree module taints kernel.
[ 4.455659] ssdk_dt_parse_interrupt[941]:INFO:intr-gpio does not exist
[ 4.517756] aquantia_phy_api_ops_init[1485]:INFO:qca probe aquantia phy driver succeeded!
[ 5.695423] regi_init[2525]:INFO:Initializing HPPE Done!!
[ 5.695541] regi_init[2574]:INFO:qca-ssdk module init succeeded!
[ 5.701970] EDMA ver 1 hw init
[ 5.706125] EDMA HW Reset completed succesfully
[ 5.708777] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
[ 5.713174] RxDesc:1 (15-15) RxFill:1 (7-7)
[ 5.718798] GMAC1(ffffff800288f940) Invalid MAC@ - using 42:62:5b:6e:3e:fd
[ 5.722554] dp1: ppe offload disabled: 0 for macid 1
[ 5.729501] dp1: Switch attached to macid 1 status: 0
[ 5.926158] Qualcomm QCA8075 90000.mdio-1:00: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:00, irq=POLL)
[ 5.927029] GMAC2(ffffff800229d940) Invalid MAC@ - using ee:1b:00:32:17:63
[ 5.935052] dp2: ppe offload disabled: 0 for macid 2
[ 5.941924] dp2: Switch attached to macid 2 status: 0
[ 6.025736] Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL)
[ 6.026618] GMAC3(ffffff800333b940) Invalid MAC@ - using 52:b8:6a:cd:ec:2e
[ 6.034630] dp3: ppe offload disabled: 0 for macid 3
[ 6.041502] dp3: Switch attached to macid 3 status: 0
[ 6.115724] Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL)
[ 6.116629] GMAC4(ffffff8004868940) Invalid MAC@ - using 72:15:dd:94:7b:c2
[ 6.124618] dp4: ppe offload disabled: 0 for macid 4
[ 6.131496] dp4: Switch attached to macid 4 status: 0
[ 6.215737] Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL)
[ 6.216630] GMAC6(ffffff800486d940) Invalid MAC@ - using e2:14:5b:bc:d8:fa
[ 6.224630] dp6-syn: ppe offload disabled: 0 for macid 6
[ 6.231507] dp6-syn: Switch attached to macid 6 status: 0
[ 6.247643] Aquantia AQR114C 90000.mdio-1:08: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:08, irq=POLL)
[ 6.248459] **********************************************************
[ 6.256551] * NSS Data Plane driver
[ 6.263039] **********************************************************
[ 6.279137] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 6.279190] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 6.283648] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002000010
[ 6.291134] xhci-hcd xhci-hcd.1.auto: irq 43, io mem 0x08a00000
[ 6.300568] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 6.306362] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 6.311915] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 6.319893] hub 1-0:1.0: USB hub found
[ 6.326095] hub 1-0:1.0: 1 port detected
[ 6.330037] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.334137] hub 2-0:1.0: USB hub found
[ 6.342084] hub 2-0:1.0: 1 port detected
[ 6.349522] usbcore: registered new interface driver usb-storage
[ 6.350330] usbcore: registered new interface driver uas
[ 6.355901] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.370852] init: - preinit -
[ 6.865841] mtdblock: MTD device 'devinfo' is NAND, please consider using UBI block devices instead.
[ 11.406629] mount_root: loading kmods from internal overlay
[ 11.420512] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 11.421977] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 11.462053] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[ 11.535202] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 11.535326] block: unable to load configuration (fstab: Entry not found)
[ 11.541303] block: attempting to load /tmp/overlay/etc/config/fstab
[ 11.547840] block: unable to load configuration (fstab: Entry not found)
[ 11.553779] block: attempting to load /etc/config/fstab
[ 11.563758] block: unable to load configuration (fstab: Entry not found)
[ 11.565686] block: no usable configuration
[ 11.574802] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 11.576641] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 1049
[ 11.613288] UBIFS (ubi0:1): recovery needed
[ 11.722991] UBIFS (ubi0:1): recovery completed
[ 11.723104] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 11.726382] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 11.734261] UBIFS (ubi0:1): FS size: 121643008 bytes (116 MiB, 958 LEBs), max 969 LEBs, journal size 6094848 bytes (5 MiB, 48 LEBs)
[ 11.744176] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 11.755790] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 81D1C313-9A3B-4681-8F0E-068681003F4C, small LPT model
[ 11.764164] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 11.779939] block: extroot: not configured
[ 11.780747] UBIFS (ubi0:1): un-mount UBI device 0
[ 11.784782] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 11.792754] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 11.795746] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 1052
[ 11.872812] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 11.872855] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 11.879651] UBIFS (ubi0:1): FS size: 121643008 bytes (116 MiB, 958 LEBs), max 969 LEBs, journal size 6094848 bytes (5 MiB, 48 LEBs)
[ 11.889543] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 11.901162] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 81D1C313-9A3B-4681-8F0E-068681003F4C, small LPT model
[ 11.911368] mount_root: loading kmods from internal overlay
[ 11.935639] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 11.937012] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 11.947606] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[ 11.973691] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 11.977790] block: extroot: not configured
[ 11.980991] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 11.983640] block: extroot: not configured
[ 11.992400] mount_root: switching to ubifs overlay
[ 12.000581] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 12.005454] urandom-seed: Seeding with /etc/urandom.seed
[ 12.043370] procd: - early -
[ 12.043453] procd: - watchdog -
[ 12.592797] procd: - watchdog -
[ 12.595015] procd: - ubus -
[ 12.712644] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[ 12.746034] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[ 12.749811] procd: - init -
[ 12.802831] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[ 12.892628] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[ 12.948204] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[ 12.984461] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[ 13.025739] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[ 13.072062] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[ 13.108235] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[ 13.120066] kmodloader: loading kernel modules from /etc/modules.d/*
[ 13.211821] urngd: v1.0.2 started.
[ 13.227309] OpenVPN data channel offload (ovpn-dco) 2.0.0 -- (C) 2020-2023 OpenVPN, Inc.
[ 13.229452] tun: Universal TUN/TAP device driver, 1.6
[ 13.249260] hid: raw HID events driver (C) Jiri Kosina
[ 13.252656] ntfs3: Enabled Linux POSIX ACLs support
[ 13.267991] Bluetooth: Core ver 2.22
[ 13.268113] NET: Registered PF_BLUETOOTH protocol family
[ 13.270667] Bluetooth: HCI device and connection manager initialized
[ 13.275965] Bluetooth: HCI socket layer initialized
[ 13.282281] Bluetooth: L2CAP socket layer initialized
[ 13.286918] Bluetooth: SCO socket layer initialized
[ 13.293178] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.296787] Bluetooth: BNEP filters: protocol multicast
[ 13.302339] Bluetooth: BNEP socket layer initialized
[ 13.311259] usbcore: registered new interface driver btusb
[ 13.313402] usbcore: registered new interface driver cdc_acm
[ 13.317809] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 13.324506] usbcore: registered new interface driver cdc_wdm
[ 13.332211] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a
[ 13.337243] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2
[ 13.345448] Bluetooth: HCI UART driver ver 2.3
[ 13.351376] Bluetooth: HCI UART protocol H4 registered
[ 13.355908] Bluetooth: HCI UART protocol BCSP registered
[ 13.361011] Bluetooth: HCI UART protocol ATH3K registered
[ 13.367444] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 13.371791] Bluetooth: HIDP socket layer initialized
[ 13.387198] NET: Registered PF_QIPCRTR protocol family
[ 13.389606] Bluetooth: RFCOMM TTY layer initialized
[ 13.391249] Bluetooth: RFCOMM socket layer initialized
[ 13.396083] Bluetooth: RFCOMM ver 1.11
[ 13.403835] usbcore: registered new interface driver usblp
[ 13.407800] usbcore: registered new interface driver usbserial_generic
[ 13.410498] usbserial: USB Serial support registered for generic
[ 13.418014] usbcore: registered new interface driver cdc_ether
[ 13.424107] usbcore: registered new interface driver cdc_ncm
[ 13.438570] usbcore: registered new interface driver huawei_cdc_ncm
[ 13.514690] PPP generic driver version 2.4.2
[ 13.515749] NET: Registered PF_PPPOX protocol family
[ 13.519051] usbcore: registered new interface driver qmi_wwan
[ 13.523978] usbcore: registered new interface driver rndis_host
[ 13.529593] usbcore: registered new interface driver sierra
[ 13.534415] usbserial: USB Serial support registered for Sierra USB modem
[ 13.542786] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 13.546892] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 13.563673] ath11k c000000.wifi: ipq8074 hw2.0
[ 13.564214] ath11k c000000.wifi: FW memory mode: 0
[ 14.337864] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
[ 14.342806] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[ 15.524493] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
[ 15.568175] ath11k c000000.wifi: qmi ignore invalid mem req type 3
[ 15.575646] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
[ 15.575683] ath11k c000000.wifi: fw_version 0x290b84a5 fw_build_timestamp 2024-09-23 11:32 fw_build_id WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
[ 15.715109] remoteproc remoteproc0: stopped remote processor cd00000.q6v5_wcss
[ 15.715151] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
[ 15.721303] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[ 16.071304] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
[ 16.072889] ath11k_pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit]
[ 16.077855] ath11k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 16.085963] ath11k_pci 0000:01:00.0: MSI vectors: 16
[ 16.091678] ath11k_pci 0000:01:00.0: qcn9074 hw1.0
[ 16.096873] ath11k_pci 0000:01:00.0: FW memory mode: 2
[ 16.115169] ath11k c000000.wifi: qmi ignore invalid mem req type 3
[ 16.122697] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
[ 16.122747] ath11k c000000.wifi: fw_version 0x290b84a5 fw_build_timestamp 2024-09-23 11:32 fw_build_id WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
[ 16.282365] mhi mhi0: Requested to power ON
[ 16.282420] mhi mhi0: Power on setup success
[ 16.432302] ath11k c000000.wifi: htt event 48 not handled
[ 16.955416] mhi mhi0: Wait for device to enter SBL or Mission mode
[ 17.006819] usbcore: registered new interface driver cdc_mbim
[ 17.009120] usbcore: registered new interface driver option
[ 17.011676] usbserial: USB Serial support registered for GSM modem (1-port)
[ 17.021134] usbcore: registered new interface driver qcserial
[ 17.024025] usbserial: USB Serial support registered for Qualcomm USB modem
[ 17.030180] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 17.036666] ath11k_pci 0000:01:00.0: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
[ 17.043512] ath11k_pci 0000:01:00.0: fw_version 0x290b8862 fw_build_timestamp 2024-09-23 10:51 fw_build_id
[ 17.449885] mtdblock_open: 30 callbacks suppressed
[ 17.449897] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[ 17.529495] ath11k_pci 0000:01:00.0: htt event 48 not handled
[ 19.726284] br-lan: port 1(lan1) entered blocking state
[ 19.726326] br-lan: port 1(lan1) entered disabled state
[ 19.730365] nss-dp 3a001000.dp1 lan1: entered allmulticast mode
[ 19.735781] nss-dp 3a001000.dp1 lan1: entered promiscuous mode
[ 19.747370] br-lan: port 2(lan2) entered blocking state
[ 19.747419] br-lan: port 2(lan2) entered disabled state
[ 19.752503] nss-dp 3a001200.dp2 lan2: entered allmulticast mode
[ 19.757931] nss-dp 3a001200.dp2 lan2: entered promiscuous mode
[ 19.766059] br-lan: port 3(lan3) entered blocking state
[ 19.769479] br-lan: port 3(lan3) entered disabled state
[ 19.774636] nss-dp 3a001400.dp3 lan3: entered allmulticast mode
[ 19.780061] nss-dp 3a001400.dp3 lan3: entered promiscuous mode
[ 19.788091] br-lan: port 4(lan4) entered blocking state
[ 19.791609] br-lan: port 4(lan4) entered disabled state
[ 19.796772] nss-dp 3a001600.dp4 lan4: entered allmulticast mode
[ 19.802081] nss-dp 3a001600.dp4 lan4: entered promiscuous mode
[ 22.407119] phy1-sta0: authenticate with dc:2c:6e:51:c8:91 (local address=d8:ec:5e:e3:6b:69)
[ 22.407175] phy1-sta0: send auth to dc:2c:6e:51:c8:91 (try 1/3)
[ 22.415839] phy1-sta0: authenticated
[ 22.425428] phy1-sta0: associate with dc:2c:6e:51:c8:91 (try 1/3)
[ 22.427833] phy1-sta0: RX AssocResp from dc:2c:6e:51:c8:91 (capab=0x431 status=0 aid=2)
[ 22.431859] phy1-sta0: associated
[ 24.965925] nss-dp 3a001400.dp3 lan3: PHY Link up speed: 1000
[ 24.965987] br-lan: port 3(lan3) entered blocking state
[ 24.970665] br-lan: port 3(lan3) entered forwarding state
[ 33.765448] l11: disablingLimit bajtów na wiadomość - nie dało się w jednej. Wolną chwilą reszta, narazie siedzi jako klient WiFi. Który kraj polecacie na 6Ghz:
Enable Wi-Fi 6E (6 GHz) band
Country settingThe QCN9024 6 GHz band in the MX8500 is not able to be enabled in all countries. The regulatory database is in firmware, and as of 04 April 2025, it is believed that wireless-regdb cannot be sourced for allowed 6GHz channels, even in the newest Linux kernel code (source). The following list likely reflects where the MX8500 either was sold or was planned to be sold at one time, based on where 6 GHz channels are allowed in firmware. One of these two-letter codes must be placed in the wifi-device section of radio2, as option country 'XX' .
6 GHz channels 33–233 allowed (packaged board file)American Samoa (AS), Argentina (AR), Brazil (BR), Canada (CA), Chile (CL), Costa Rica (CR), Guam (GU), Guatemala (GT), Honduras (HN), Korea (KR), Northern Mariana Islands (MP), Peru (PE), Puerto Rico (PR), Saudi Arabia (SA), United States (US), United States Minor Outlying Islands (UM), U.S. Virgin Islands (VI)
6 GHz channels 33–93 allowed (packaged board file)Aland Islands (AX), Andorra (AD), Belgium (BE), Curaçao (CW), Cypress (CY), Czechia (CZ), Denmark (DK), Estonia (EE), Falkland Islands (Malvinas) (FK), Faroe Islands (FO), Finland (FI), France (FR), French Guiana (GF), French Polynesia (PF), French Southern Territories (TF), Germany (DE), Guadeloupe (GP), Guernsey (GG), Iceland (IS), Ireland (IE), Isle of Man (IM), Jersey (JE), Liechtenstein (LI), Lithuania (LT), Malaysia (MY), Malta (MT), Martinique (MQ), Mayotte (YT), Montserrat (MS), Morocco (MA), Netherlands (NL), New Caledonia (NC), Norway (NO), Portugal (PT), Réunion (RE), Saint Helena, Ascension and Tristan da Cunha (SH), Saint Pierre and Miquelon (PM), Sint Maarten (Dutch part) (SX), Spain (ES), Svalbard and Jan Mayen (SJ), Sweden (SE), Switzerland (CH), United Arab Emirates (AE), United Kingdom of Great Britain and Northern Ireland (GB), British Virgin Islands (VG)
Odp: Linksys WHW01 (Velop)
W przypadku ath11k nie jest używana linuksowa baza regdb. W BDF jest osobna baza (Polska dla 6GHz nie jest przewidziana ).
Możesz ustawić, DE, GB, US ale raczej nie zauważysz różnicy. Radio 6G trzeba traktować bardziej jako ciekawostkę ze względu na znikomy zasięg.
Odp: Linksys WHW01 (Velop)
Może by tak posty nt mx8500 wydzielić do osobnego tematu?
Dom : router https://i.imgur.com/IuB6Zwy.png | TP-LINK T1700G-28TQ |Zyxel XGS-1210-12 | 6x Ruckus r310 unleashed + Ruckus icx7150-c12p | Truenas scale 124TB 25Gb| Xpenology 12TB | apc smart ups 750 lcd 100Mb/s - 25Gb/s
Podróżne : GL.Inet MT3000 +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip + panel 285Wp + lifepo4 12v 60Ah .
100Mb/s - 25Gb/sPodróżne : GL.Inet MT3000 +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip + panel 285Wp + lifepo4 12v 60Ah .
Odp: Linksys WHW01 (Velop)
Witam, posiadam ten router z wgranym OpenWRT z obrazem Cezarego, skonfigurowałem go pod swiatłowód Orange i fajnie to działa. Jednak w logach systemowych pojawia mi się takie coś:
daemon.err odhcp6c[2242]: Failed to send SOLICIT message to ff02::1:2 (Network unreachable)
Wiem, że jest to chyba związane z IPv6, ale nie mam pojęcia dlaczego się to pojawia ?
GL I.Net GL-MT6000 | GL I.Net GL-MT3000 (Beryl AX)| Banana Pi BPI-R4 | Banana PI BPI-R3 | Quantum Fiber W1700K | Zyxel T-56 | Linksys MX8500 | Linksys MX6200 | Linksys MX5300 | Linksys MX4300 | Linksys SPNMX42 (MX4200v2 ) | Linksys MX4200 V1 x2 | Linksys WHW03 V2 | Linksys WHW01 | Netgear R6220 | Zyxel SCR50AXE
Odp: Linksys WHW01 (Velop)
Ponieważ nie masz skonfigurowanego ipv6. Zignoruj lub wywal jeżeli nie używasz ipv6.
Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.
Odp: Linksys WHW01 (Velop)
Ok, a jak mam to usunąć ?
GL I.Net GL-MT6000 | GL I.Net GL-MT3000 (Beryl AX)| Banana Pi BPI-R4 | Banana PI BPI-R3 | Quantum Fiber W1700K | Zyxel T-56 | Linksys MX8500 | Linksys MX6200 | Linksys MX5300 | Linksys MX4300 | Linksys SPNMX42 (MX4200v2 ) | Linksys MX4200 V1 x2 | Linksys WHW03 V2 | Linksys WHW01 | Netgear R6220 | Zyxel SCR50AXE
Posty: 26 do 50 z 54
Strony Poprzednia 1 2 3 Następna
Zaloguj się lub zarejestruj by napisać odpowiedź
eko.one.pl → Sprzęt / Hardware → Linksys WHW01 (Velop)
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc