26 Odpowiedź przez Focus

  • Focus
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2020-10-20
  • Posty: 952

Odp: Asus TUF-AX6000

Ja bym skasował plik wireless całkowicie i uruchomiłbym router na nowo.
Plik wireless powinien utworzyć się na nowo z domyślnym konfigiem.
I taki domyślny konfig powinieneś pokazać przed zmianami.
Można jeszcze w wifi-device spróbować dodać option disabled '0'.

27 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,839

Odp: Asus TUF-AX6000

Nie daje ci kanałów 2.4G? Ciekawe.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

28 Odpowiedź przez fruu

  • fruu
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-02-27
  • Posty: 36

Odp: Asus TUF-AX6000

Jako ciekawostkę podam, że kiedy wrócę do softu asusa to wifi działa

29 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,839

Odp: Asus TUF-AX6000

No zobacz: https://eko.one.pl/forum/viewtopic.php? … 65#p306965

czy ty jakiegoś sterownika nie masz?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

30 Odpowiedź przez fruu

  • fruu
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-02-27
  • Posty: 36

Odp: Asus TUF-AX6000

No i dupa. Wszystko co trzeba jest poinstalowane ale dziadostwo dalej nie działa. To jakiś router sadysta :-D

31 Odpowiedź przez szyper

  • szyper
  • Użytkownik
  • Nieaktywny
  • Skąd: mazowieckie równiny
  • Zarejestrowany: 2020-02-10
  • Posty: 476

Odp: Asus TUF-AX6000

sprawdz ten firmware testowo, czy dziala ci jakos inaczej lepiej
https://downloads.x-wrt.com/rom/x-wrt-2 … pgrade.bin

32 Odpowiedź przez Rafciq (edytowany przez Rafciq 2025-03-11 18:24:43)

  • Rafciq
  • Użytkownik
  • Nieaktywny
  • Skąd: Warszawa
  • Zarejestrowany: 2012-03-21
  • Posty: 266

Odp: Asus TUF-AX6000

Cezary napisał/a:

A to dlatego że w 23.05 brakuje tej poprawki: https://github.com/openwrt/openwrt/comm … 0ab0082270

@Cezary, czy ta poprawka jest już z w kolejnych wersjach? Pytam bo mam chyba podobny problem.

install.sh - Aktualizacja systemu, sysinfo.sh - Info.o systemie, openvpn-auth.sh - Login dla OpenVPN
Tu moje skrypty na GitHub

33 Odpowiedź przez Juniorek

  • Zarejestrowany: 2018-11-12
  • Posty: 86

Odp: Asus TUF-AX6000

Rafciq napisał/a:
Cezary napisał/a:

A to dlatego że w 23.05 brakuje tej poprawki: https://github.com/openwrt/openwrt/comm … 0ab0082270

@Cezary, czy ta poprawka jest już z w kolejnych wersjach? Pytam bo mam chyba podobny problem.

Już od dawna smile

34 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,839

Odp: Asus TUF-AX6000

Tak, od dawna.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

35 Odpowiedź przez Rafciq

  • Rafciq
  • Użytkownik
  • Nieaktywny
  • Skąd: Warszawa
  • Zarejestrowany: 2012-03-21
  • Posty: 266

Odp: Asus TUF-AX6000

Na OpenWrt https://openwrt.org/toh/asus/tuf-ax6000 jest taka wzmianka.

Please note that OpenWrt 24.10.0 works only on devices with U-Boot 2022.04-rc1.
If you have a recent U-Boot >= 2022.10 installing OpenWrt 24.10.0 will brick your device.
If unsure DO NOT INSTALL OpenWrt 24.10.0 and wait for OpenWrt 24.10.1.

@Cezary czy Twoje obrazy są tez obarczone tym problemem?

install.sh - Aktualizacja systemu, sysinfo.sh - Info.o systemie, openvpn-auth.sh - Login dla OpenVPN
Tu moje skrypty na GitHub

36 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,839

Odp: Asus TUF-AX6000

https://eko.one.pl/?p=openwrt-24.10#historiazmian

(build zawiera standardowo poprawkę do właściwego uruchamiania ASUS RT-AX59U / ASUS TUF-AX4200 / ASUS TUF-AX6000 oraz wsparcie dla Mercusys MR1800X)

Oficjalnie jest to już w openwrt w gałęzi wersji stabilnej

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

37 Odpowiedź przez Rafciq

  • Rafciq
  • Użytkownik
  • Nieaktywny
  • Skąd: Warszawa
  • Zarejestrowany: 2012-03-21
  • Posty: 266

Odp: Asus TUF-AX6000

Ok. Czyli ten obraz https://dl.eko.one.pl/luci/openwrt-24.1 … pgrade.bin powinien być pozbawiony tego problemu? Dobrze zrozumiałem?

install.sh - Aktualizacja systemu, sysinfo.sh - Info.o systemie, openvpn-auth.sh - Login dla OpenVPN
Tu moje skrypty na GitHub

38 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,839

Odp: Asus TUF-AX6000

Tak. Dokładnie tym to poprawili: https://github.com/openwrt/openwrt/comm … 959a82a076 + poprawka poprzednia.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

39 Odpowiedź przez Rafciq

  • Rafciq
  • Użytkownik
  • Nieaktywny
  • Skąd: Warszawa
  • Zarejestrowany: 2012-03-21
  • Posty: 266

Odp: Asus TUF-AX6000

No to ucegliłem dziada. Najpierw po aktualizacji miałem problem z Wifi, dokładnie taki jak tutaj opisany. Nie działało, konfiguracja 2g koniecznie chciała być 5g, cokolwiek bym nie zrobił radia nie było mimo, że czasami LuCi pokazywało, że działa.
Teraz bootloader działa ale wgranie jakiejkolwiek wersji włącznie z w/w daje ten sam efekt. Podnosi się i jak tylko zaświeci się LED od Wifi natychmiast się restartuje.

install.sh - Aktualizacja systemu, sysinfo.sh - Info.o systemie, openvpn-auth.sh - Login dla OpenVPN
Tu moje skrypty na GitHub

40 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,839

Odp: Asus TUF-AX6000

Wgrałeś z zachowaniem konfiguracji z poprzedniej wersji?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

41 Odpowiedź przez Rafciq

  • Rafciq
  • Użytkownik
  • Nieaktywny
  • Skąd: Warszawa
  • Zarejestrowany: 2012-03-21
  • Posty: 266

Odp: Asus TUF-AX6000

Chyba tak. Teraz mam tylko TFTP do dyspozycji i tylko tym próbuję.

install.sh - Aktualizacja systemu, sysinfo.sh - Info.o systemie, openvpn-auth.sh - Login dla OpenVPN
Tu moje skrypty na GitHub

42 Odpowiedź przez Rafciq (edytowany przez Rafciq 2025-03-12 20:50:11)

  • Rafciq
  • Użytkownik
  • Nieaktywny
  • Skąd: Warszawa
  • Zarejestrowany: 2012-03-21
  • Posty: 266

Odp: Asus TUF-AX6000

Oczywiście o failsafe nie ma mowy. Wgranie firmware ASUS-a też daje identyczny efekt.

install.sh - Aktualizacja systemu, sysinfo.sh - Info.o systemie, openvpn-auth.sh - Login dla OpenVPN
Tu moje skrypty na GitHub

43 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,839

Odp: Asus TUF-AX6000

Openwrt bootloadera ci nie zmieniło samo z sobie, więc masz taki jak miałeś. Jeżeli wcześniej działał na tym oryginał to nadal powinien.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

44 Odpowiedź przez Rafciq

  • Rafciq
  • Użytkownik
  • Nieaktywny
  • Skąd: Warszawa
  • Zarejestrowany: 2012-03-21
  • Posty: 266

Odp: Asus TUF-AX6000

Niestety cokolwiek wgram jest identycznie - rusza i po 2-3 sekundach restart.
Jutro podepne się serialem i zobaczę co on tam pisze do mnie wink

install.sh - Aktualizacja systemu, sysinfo.sh - Info.o systemie, openvpn-auth.sh - Login dla OpenVPN
Tu moje skrypty na GitHub

45 Odpowiedź przez advcron (edytowany przez advcron 2025-03-12 21:26:03)

  • Zarejestrowany: 2012-10-15
  • Posty: 129

Odp: Asus TUF-AX6000

Wgraj najpierw trx ubi-cleaner, a potem oryginalny firmware.
https://drive.google.com/drive/folders/ … s3f9FxTSiP
ubi-cleaner wgrywasz przez ausus restoration tool.

46 Odpowiedź przez Rafciq

  • Rafciq
  • Użytkownik
  • Nieaktywny
  • Skąd: Warszawa
  • Zarejestrowany: 2012-03-21
  • Posty: 266

Odp: Asus TUF-AX6000

Pacjent ożył, DZIAŁA!, @advcron dziękuję bardzo za pomoc.

install.sh - Aktualizacja systemu, sysinfo.sh - Info.o systemie, openvpn-auth.sh - Login dla OpenVPN
Tu moje skrypty na GitHub

47 Odpowiedź przez Rafciq

  • Rafciq
  • Użytkownik
  • Nieaktywny
  • Skąd: Warszawa
  • Zarejestrowany: 2012-03-21
  • Posty: 266

Odp: Asus TUF-AX6000

Zainstalowałem OpenWrt 24.10 z LuCi na próbę i niestety WiFi brak. Wróciłem więc do 23.05 i tu wszystko jest ok, tak jak było dotychczas.

install.sh - Aktualizacja systemu, sysinfo.sh - Info.o systemie, openvpn-auth.sh - Login dla OpenVPN
Tu moje skrypty na GitHub

48 Odpowiedź przez Rafciq

  • Rafciq
  • Użytkownik
  • Nieaktywny
  • Skąd: Warszawa
  • Zarejestrowany: 2012-03-21
  • Posty: 266

Odp: Asus TUF-AX6000

Niestety radość moja połowiczna, router odżył ale nie w całości. System się podnosi, ale Wifi jednak nie działa pod OpenWrt, ani na 24.10 ani na 23.05. Na oryginalnym sofcie ASUS-a WiFi działa bez problemu.
Mam dwa takie routery. Dotychczas działały bez problemowo na 23.05, maja identyczne konfiguracje. Jeden z nich podniosłem do 24.10 i WiFi zdechło. Drugi oczywiście z tą samą konfiguracją grzecznie działa bez najmniejszych problemów.

Ma ktoś jakiś pomysł?

Nie jestem pewien na 100% ale wole ostrzec. Jeżeli masz Asus TUF-AX6000 i najdzie Cię ochota na upgrade do 24.10, to daj sobie po łapach.

install.sh - Aktualizacja systemu, sysinfo.sh - Info.o systemie, openvpn-auth.sh - Login dla OpenVPN
Tu moje skrypty na GitHub

49 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,839

Odp: Asus TUF-AX6000

Dasz logi od samego uruchomienia ?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

50 Odpowiedź przez Rafciq

  • Rafciq
  • Użytkownik
  • Nieaktywny
  • Skąd: Warszawa
  • Zarejestrowany: 2012-03-21
  • Posty: 266

Odp: Asus TUF-AX6000

Jasne. Porównałem ten log z drugim działającym routerem. Oprócz różnic adresów czy zapisów związanych z różnymi urządzeniami USB wszystko jest identyczne.
Zauważyłem, że interfejsy phy na routerze z niedziałającym WiFi mają adresy xx:AA:BB:CC:DD:Ex.

Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    0.000000] Linux version 5.15.173 (cezary@eko.one.pl) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23004-7f0db09513) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Fri Dec 27 12:18:24 2024
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] Machine model: ASUS TUF-AX6000
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] Zone ranges:
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000]   DMA      [mem 0x0000000040000000-0x000000005fffffff]
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000]   DMA32    empty
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000]   Normal   empty
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] Movable zone start for each node
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] Early memory node ranges
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x0000000042ffffff]
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000043000000-0x000000004302ffff]
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000043030000-0x000000004fbfffff]
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000]   node   0: [mem 0x000000004fc00000-0x000000004ffbffff]
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000]   node   0: [mem 0x000000004ffc0000-0x000000005fffffff]
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] psci: probing for conduit method from DT.
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] psci: PSCIv1.1 detected in firmware.
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] psci: Using standard PSCI v0.2 function IDs
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] psci: SMC Calling Convention v1.2
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] percpu: Embedded 18 pages/cpu s33112 r8192 d32424 u73728
Thu Mar 13 17:46:53 2025 kern.debug kernel: [    0.000000] pcpu-alloc: s33112 r8192 d32424 u73728 alloc=18*4096
Thu Mar 13 17:46:53 2025 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] Detected VIPT I-cache on CPU0
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] CPU features: detected: GIC system register CPU interface
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129024
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    0.000000] Kernel command line: ubi.mtd=UBI_DEV
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] Memory: 498072K/524288K available (8448K kernel code, 904K rwdata, 1488K rodata, 448K init, 302K bss, 26216K reserved, 0K cma-reserved)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000]     Tracing variant of Tasks RCU enabled.
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] GICv3: 640 SPIs implemented
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] GICv3: 0 Extended SPIs implemented
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] GICv3: Distributor has no Range Selector support
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] Root IRQ handler: 0xffffffc008010090
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] GICv3: 16 PPIs implemented
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000111] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000119] pid_max: default: 32768 minimum: 301
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000319] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.000327] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.001357] rcu: Hierarchical SRCU implementation.
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.001626] smp: Bringing up secondary CPUs ...
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.001879] Detected VIPT I-cache on CPU1
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.001903] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.001929] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.002183] Detected VIPT I-cache on CPU2
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.002195] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.002205] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.002444] Detected VIPT I-cache on CPU3
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.002454] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.002464] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.002490] smp: Brought up 1 node, 4 CPUs
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.002503] SMP: Total of 4 processors activated.
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.002507] CPU features: detected: 32-bit EL0 Support
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.002511] CPU features: detected: CRC32 instructions
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.002535] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.002590] CPU: All CPU(s) started at EL2
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.002599] alternatives: patching kernel code
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.005023] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.005045] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.005187] pinctrl core: initialized pinctrl subsystem
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.005816] NET: Registered PF_NETLINK/PF_ROUTE protocol family
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.006048] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.006068] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.006092] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.006349] thermal_sys: Registered thermal governor 'fair_share'
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.006353] thermal_sys: Registered thermal governor 'bang_bang'
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.006356] thermal_sys: Registered thermal governor 'step_wise'
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.006359] thermal_sys: Registered thermal governor 'user_space'
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.006527] ASID allocator initialised with 65536 entries
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.006853] pstore: Registered ramoops as persistent store backend
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.006857] ramoops: using 0x10000@0x42ff0000, ecc: 0
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.014745] cryptd: max_cpu_qlen set to 1000
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    0.016486] SCSI subsystem initialized
Thu Mar 13 17:46:53 2025 kern.debug kernel: [    0.016564] libata version 3.00 loaded.
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.017356] clocksource: Switched to clocksource arch_sys_counter
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.017884] NET: Registered PF_INET protocol family
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.017958] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.018320] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.018331] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.018338] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.018358] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.018401] TCP: Hash tables configured (established 4096 bind 4096)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.018456] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.018468] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.018566] NET: Registered PF_UNIX/PF_LOCAL protocol family
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.018584] PCI: CLS 0 bytes, default 64
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.020450] workingset: timestamp_bits=46 max_order=17 bucket_order=0
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.023107] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.023121] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.045150] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.048800] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.050501] printk: console [ttyS0] disabled
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.070648] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 121, base_baud = 2500000) is a ST16650V2
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.709316] printk: console [ttyS0] enabled
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.714127] mtk_rng 1020f000.rng: registered RNG driver
Thu Mar 13 17:46:53 2025 kern.warn kernel: [    0.714184] hwrng: no data available
Thu Mar 13 17:46:53 2025 kern.warn kernel: [    0.722929] cacheinfo: Unable to detect cache hierarchy for CPU 0
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.731111] loop: module loaded
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.734259] Loading iSCSI transport class v2.0-870.
Thu Mar 13 17:46:53 2025 kern.warn kernel: [    0.740468] spi spi0.0: setup: ignoring unsupported mode bits a00
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.746784] spi-nand spi0.0: Winbond SPI NAND was found.
Thu Mar 13 17:46:53 2025 kern.info kernel: [    0.752094] spi-nand spi0.0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    0.760426] 2 fixed-partitions partitions found on MTD device spi0.0
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    0.766762] Creating 2 MTD partitions on "spi0.0":
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    0.771545] 0x000000000000-0x000000400000 : "Bootloader"
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    0.780800] 0x000000400000-0x000010000000 : "UBI_DEV"
Thu Mar 13 17:46:53 2025 kern.err kernel: [    1.128527] mtk_soc_eth 15100000.ethernet: generated random MAC address 92:fe:a0:60:0a:a7
Thu Mar 13 17:46:53 2025 kern.err kernel: [    1.136756] mtk_soc_eth 15100000.ethernet: generated random MAC address f6:23:c2:ef:ea:f7
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.248323] Maxlinear Ethernet GPY211C mdio-bus:05: Firmware Version: 0x886F (release)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.257398] Maxlinear Ethernet GPY211C mdio-bus:06: Firmware Version: 0x886F (release)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.267786] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc009700000, irq 129
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.277579] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc009700000, irq 129
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.287066] i2c_dev: i2c /dev entries driver
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.292331] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.300770] NET: Registered PF_INET6 protocol family
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.306351] Segment Routing with IPv6
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.310040] In-situ OAM (IOAM) with IPv6
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.313975] NET: Registered PF_PACKET protocol family
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.319038] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.332067] 8021q: 802.1Q VLAN Support v1.8
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.337059] pstore: Using crash dump compression: deflate
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.387678] mt7530-mdio mdio-bus:1f: no interrupt support
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.399173] mt7530-mdio mdio-bus:1f: configuring for fixed/2500base-x link mode
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.408300] mt7530-mdio mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx
Thu Mar 13 17:46:53 2025 kern.warn kernel: [    1.417237] MediaTek MT7531 PHY mt7530-0:01: Configure LED registers (num=14)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.431767] mt7530-mdio mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=POLL)
Thu Mar 13 17:46:53 2025 kern.warn kernel: [    1.451790] MediaTek MT7531 PHY mt7530-0:02: Configure LED registers (num=14)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.466325] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=POLL)
Thu Mar 13 17:46:53 2025 kern.warn kernel: [    1.486046] MediaTek MT7531 PHY mt7530-0:03: Configure LED registers (num=14)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.500576] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=POLL)
Thu Mar 13 17:46:53 2025 kern.warn kernel: [    1.520296] MediaTek MT7531 PHY mt7530-0:04: Configure LED registers (num=14)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.534827] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7531 PHY] (irq=POLL)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.546018] mt7530-mdio mdio-bus:1f lan5 (uninitialized): PHY [mdio-bus:05] driver [Maxlinear Ethernet GPY211C] (irq=POLL)
Thu Mar 13 17:46:53 2025 kern.info kernel: [    1.557396] DSA: tree 0 setup
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    1.560663] ubi0: default fastmap pool size: 100
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    1.565270] ubi0: default fastmap WL pool size: 50
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    1.570062] ubi0: attaching mtd1
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    4.417355] random: crng init done
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    5.690174] ubi0: scanning is finished
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    5.717779] ubi0: attached mtd1 (name "UBI_DEV", size 252 MiB)
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    5.723607] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    5.730469] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    5.737235] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    5.744177] ubi0: good PEBs: 2016, bad PEBs: 0, corrupted PEBs: 0
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    5.750252] ubi0: user volume: 8, internal volumes: 1, max. volumes count: 128
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    5.757454] ubi0: max/mean erase counter: 15/10, WL threshold: 4096, image sequence number: 1117846466
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    5.766734] ubi0: available PEBs: 0, total reserved PEBs: 2016, PEBs reserved for bad PEB handling: 40
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    5.776024] ubi0: background thread "ubi_bgt0d" started, PID 466
Thu Mar 13 17:46:53 2025 kern.info kernel: [    5.779756] block ubiblock0_6: created from ubi0:6(rootfs)
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    5.787510] ubiblock: device ubiblock0_6 (rootfs) set to be root filesystem
Thu Mar 13 17:46:53 2025 kern.info kernel: [    5.794615] clk: Disabling unused clocks
Thu Mar 13 17:46:53 2025 kern.info kernel: [    5.814413] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Thu Mar 13 17:46:53 2025 kern.info kernel: [    5.821727] Freeing unused kernel memory: 448K
Thu Mar 13 17:46:53 2025 kern.info kernel: [    5.826189] Run /sbin/init as init process
Thu Mar 13 17:46:53 2025 kern.debug kernel: [    5.830272]   with arguments:
Thu Mar 13 17:46:53 2025 kern.debug kernel: [    5.833222]     /sbin/init
Thu Mar 13 17:46:53 2025 kern.debug kernel: [    5.835913]   with environment:
Thu Mar 13 17:46:53 2025 kern.debug kernel: [    5.839041]     HOME=/
Thu Mar 13 17:46:53 2025 kern.debug kernel: [    5.841385]     TERM=linux
Thu Mar 13 17:46:53 2025 user.info kernel: [    6.190176] init: Console is alive
Thu Mar 13 17:46:53 2025 user.info kernel: [    6.193663] init: - watchdog -
Thu Mar 13 17:46:53 2025 user.info kernel: [    7.236623] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.281122] usbcore: registered new interface driver usbfs
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.286626] usbcore: registered new interface driver hub
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.291975] usbcore: registered new device driver usb
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.303766] xhci-mtk 11200000.usb: xHCI Host Controller
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.309019] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.319463] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000210010
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.328618] xhci-mtk 11200000.usb: irq 123, io mem 0x11200000
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.334429] xhci-mtk 11200000.usb: xHCI Host Controller
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.339643] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.347019] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.354373] hub 1-0:1.0: USB hub found
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.358178] hub 1-0:1.0: 2 ports detected
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.362431] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.370758] hub 2-0:1.0: USB hub found
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.374521] hub 2-0:1.0: 1 port detected
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.381830] usbcore: registered new interface driver usb-storage
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.388549] usbcore: registered new interface driver uas
Thu Mar 13 17:46:53 2025 user.info kernel: [    7.394058] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Mar 13 17:46:53 2025 user.info kernel: [    7.404864] init: - preinit -
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.817403] usb 1-2: new high-speed USB device number 2 using xhci-mtk
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.843108] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.851567] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
Thu Mar 13 17:46:53 2025 kern.info kernel: [    7.852610] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Mar 13 17:46:53 2025 kern.info kernel: [    8.002077] usb-storage 1-2:1.2: USB Mass Storage device detected
Thu Mar 13 17:46:53 2025 kern.info kernel: [    8.008433] scsi host0: usb-storage 1-2:1.2
Thu Mar 13 17:46:53 2025 kern.info kernel: [    8.060776] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
Thu Mar 13 17:46:53 2025 kern.info kernel: [    8.073608] mt7530-mdio mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
Thu Mar 13 17:46:53 2025 kern.info kernel: [    8.073626] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    9.048020] scsi 0:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
Thu Mar 13 17:46:53 2025 kern.warn kernel: [    9.056896] sd 0:0:0:0: Power-on or device reset occurred
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    9.062801] sd 0:0:0:0: [sda] Media removed, stopped polling
Thu Mar 13 17:46:53 2025 kern.notice kernel: [    9.069134] sd 0:0:0:0: [sda] Attached SCSI removable disk
Thu Mar 13 17:46:53 2025 user.info kernel: [   10.345016] mount_root: loading kmods from internal overlay
Thu Mar 13 17:46:53 2025 user.info kernel: [   10.356213] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Thu Mar 13 17:46:53 2025 user.info kernel: [   10.368745] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.053852] UBIFS (ubi0:7): Mounting in unauthenticated mode
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.059585] UBIFS (ubi0:7): background thread "ubifs_bgt0_7" started, PID 664
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.186732] UBIFS (ubi0:7): recovery needed
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.508415] UBIFS (ubi0:7): recovery completed
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.512919] UBIFS (ubi0:7): UBIFS: mounted UBI device 0, volume 7, name "rootfs_data"
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.520739] UBIFS (ubi0:7): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.530637] UBIFS (ubi0:7): FS size: 159354880 bytes (151 MiB, 1255 LEBs), max 1267 LEBs, journal size 7999488 bytes (7 MiB, 63 LEBs)
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.542614] UBIFS (ubi0:7): reserved for root: 4952683 bytes (4836 KiB)
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.549211] UBIFS (ubi0:7): media format: w5/r0 (latest is w5/r0), UUID A402A75B-31CB-4597-A807-9C6E9AF84743, small LPT model
Thu Mar 13 17:46:53 2025 user.info kernel: [   11.566812] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Thu Mar 13 17:46:53 2025 user.info kernel: [   11.594331] block: extroot: not configured
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.598499] UBIFS (ubi0:7): un-mount UBI device 0
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.603195] UBIFS (ubi0:7): background thread "ubifs_bgt0_7" stops
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.615228] UBIFS (ubi0:7): Mounting in unauthenticated mode
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.620955] UBIFS (ubi0:7): background thread "ubifs_bgt0_7" started, PID 667
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.873641] UBIFS (ubi0:7): UBIFS: mounted UBI device 0, volume 7, name "rootfs_data"
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.881467] UBIFS (ubi0:7): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.891358] UBIFS (ubi0:7): FS size: 159354880 bytes (151 MiB, 1255 LEBs), max 1267 LEBs, journal size 7999488 bytes (7 MiB, 63 LEBs)
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.903332] UBIFS (ubi0:7): reserved for root: 4952683 bytes (4836 KiB)
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   11.909927] UBIFS (ubi0:7): media format: w5/r0 (latest is w5/r0), UUID A402A75B-31CB-4597-A807-9C6E9AF84743, small LPT model
Thu Mar 13 17:46:53 2025 user.info kernel: [   11.941941] mount_root: loading kmods from internal overlay
Thu Mar 13 17:46:53 2025 user.info kernel: [   12.407343] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Thu Mar 13 17:46:53 2025 kern.err kernel: [   12.516687] trusted_key: encrypted_key: failed to alloc_cipher (-2)
Thu Mar 13 17:46:53 2025 kern.info kernel: [   12.747509] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
Thu Mar 13 17:46:53 2025 kern.err kernel: [   12.784307] trusted_key: encrypted_key: failed to alloc_cipher (-2)
Thu Mar 13 17:46:53 2025 user.err kernel: [   12.887517] kmodloader: 2 modules could not be probed
Thu Mar 13 17:46:53 2025 user.err kernel: [   12.892600] kmodloader: dependency not loaded encrypted-keys
Thu Mar 13 17:46:53 2025 user.err kernel: [   12.898272] kmodloader: - dm-crypt - 1
Thu Mar 13 17:46:53 2025 user.err kernel: [   12.902033] kmodloader: - encrypted-keys - 0
Thu Mar 13 17:46:53 2025 user.info kernel: [   13.435262] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Thu Mar 13 17:46:53 2025 user.info kernel: [   13.454761] block: extroot: not configured
Thu Mar 13 17:46:53 2025 user.info kernel: [   13.463376] mount_root: switching to ubifs overlay
Thu Mar 13 17:46:53 2025 kern.warn kernel: [   13.480669] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
Thu Mar 13 17:46:53 2025 user.debug kernel: [   13.505925] urandom-seed: Seeding with /etc/urandom.seed
Thu Mar 13 17:46:53 2025 kern.info kernel: [   13.603440] mt7530-mdio mdio-bus:1f lan1: Link is Down
Thu Mar 13 17:46:53 2025 user.info kernel: [   13.622740] procd: - early -
Thu Mar 13 17:46:53 2025 user.info kernel: [   13.625672] procd: - watchdog -
Thu Mar 13 17:46:53 2025 user.info kernel: [   14.200608] procd: - watchdog -
Thu Mar 13 17:46:53 2025 user.info kernel: [   14.210259] procd: - ubus -
Thu Mar 13 17:46:53 2025 user.info kernel: [   14.269262] procd: - init -
Thu Mar 13 17:46:53 2025 user.info kernel: [   15.091810] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   15.122675] Key type encrypted registered
Thu Mar 13 17:46:53 2025 user.info kernel: [   15.191729] urngd: v1.0.2 started.
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   15.195276] Key type dns_resolver registered
Thu Mar 13 17:46:53 2025 kern.info kernel: [   15.461497] RPC: Registered named UNIX socket transport module.
Thu Mar 13 17:46:53 2025 kern.info kernel: [   15.467424] RPC: Registered udp transport module.
Thu Mar 13 17:46:53 2025 kern.info kernel: [   15.472112] RPC: Registered tcp transport module.
Thu Mar 13 17:46:53 2025 kern.info kernel: [   15.476798] RPC: Registered tcp NFSv4.1 backchannel transport module.
Thu Mar 13 17:46:53 2025 kern.info kernel: [   15.556692] tun: Universal TUN/TAP device driver, 1.6
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   16.065377] NFS: Registering the id_resolver key type
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   16.070466] Key type id_resolver registered
Thu Mar 13 17:46:53 2025 kern.notice kernel: [   16.074635] Key type id_legacy registered
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.080707] ntfs3: Enabled Linux POSIX ACLs support
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.087328] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.114521] usbcore: registered new interface driver cdc_acm
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.120194] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.128893] usbcore: registered new interface driver cdc_wdm
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.134903] Loading modules backported from Linux version v6.1.110-0-g5f55cad62cc9d
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.142557] Backport generated by backports.git v6.1.110-1-0-g965f73fc
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.154657] usbcore: registered new interface driver usblp
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.162553] usbcore: registered new interface driver usbserial_generic
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.169129] usbserial: USB Serial support registered for generic
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.199695] xt_time: kernel timezone is -0000
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.210695] cdc_ether 1-2:1.0 eth2: register 'cdc_ether' at usb-11200000.usb-2, CDC Ethernet Device, 0c:5b:8f:27:9a:64
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.221580] usbcore: registered new interface driver cdc_ether
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.228382] usbcore: registered new interface driver cdc_ncm
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.272805] usbcore: registered new interface driver huawei_cdc_ncm
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.320292] mt798x-wmac 18000000.wifi: attaching wed device 0 version 2
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.405191] platform 15010000.wed: MTK WED WO Firmware Version: DEV_000000, Build Time: 20221012175005
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.414525] platform 15010000.wed: MTK WED WO Chip ID 00 Region 3
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.917691] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20221012174648a
Thu Mar 13 17:46:53 2025 kern.info kernel: [   16.917691]
Thu Mar 13 17:46:53 2025 kern.info kernel: [   17.276554] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20221012174725
Thu Mar 13 17:46:53 2025 kern.info kernel: [   17.435635] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20221012174937
Thu Mar 13 17:46:53 2025 kern.warn kernel: [   17.582635] mt798x-wmac 18000000.wifi: eeprom load fail, use default bin
Thu Mar 13 17:46:53 2025 kern.warn kernel: [   17.595419] mt798x-wmac 18000000.wifi: missing precal data, size=403472
Thu Mar 13 17:46:53 2025 kern.info kernel: [   17.602085] mt798x-wmac 18000000.wifi: registering led 'mt76-phy0'
Thu Mar 13 17:46:53 2025 kern.info kernel: [   17.659296] mt798x-wmac 18000000.wifi: registering led 'mt76-phy1'
Thu Mar 13 17:46:53 2025 kern.info kernel: [   27.259329] PPP generic driver version 2.4.2
Thu Mar 13 17:46:53 2025 kern.info kernel: [   27.264473] NET: Registered PF_PPPOX protocol family
Thu Mar 13 17:46:53 2025 kern.info kernel: [   27.270607] usbcore: registered new interface driver qmi_wwan
Thu Mar 13 17:46:53 2025 kern.info kernel: [   27.277364] usbcore: registered new interface driver rndis_host
Thu Mar 13 17:46:53 2025 kern.info kernel: [   27.284276] usbcore: registered new interface driver sierra
Thu Mar 13 17:46:53 2025 kern.info kernel: [   27.289902] usbserial: USB Serial support registered for Sierra USB modem
Thu Mar 13 17:46:53 2025 kern.info kernel: [   27.299193] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
Thu Mar 13 17:46:53 2025 kern.info kernel: [   27.307013] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Thu Mar 13 17:46:53 2025 kern.info kernel: [   27.317705] usbcore: registered new interface driver cdc_mbim
Thu Mar 13 17:46:53 2025 kern.info kernel: [   27.326737] usbcore: registered new interface driver option
Thu Mar 13 17:46:53 2025 kern.info kernel: [   27.332357] usbserial: USB Serial support registered for GSM modem (1-port)
Thu Mar 13 17:46:53 2025 kern.info kernel: [   27.341352] usbcore: registered new interface driver qcserial
Thu Mar 13 17:46:53 2025 kern.info kernel: [   27.347132] usbserial: USB Serial support registered for Qualcomm USB modem
Thu Mar 13 17:46:53 2025 user.info kernel: [   27.354378] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Mar 13 17:46:53 2025 daemon.notice procd: /etc/rc.d/S13openssl: Generating engines.cnf
Thu Mar 13 17:46:53 2025 daemon.notice procd: /etc/rc.d/S13openssl: Generating providers.cnf
Thu Mar 13 17:46:54 2025 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Thu Mar 13 17:46:54 2025 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Thu Mar 13 17:46:54 2025 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Thu Mar 13 17:46:54 2025 user.notice dnsmasq: Allowing RFC1918 responses for domain erd-dom.x64.me
Thu Mar 13 17:46:54 2025 user.notice dnsmasq: Allowing RFC1918 responses for domain erd-dom.no-ip.org
Thu Mar 13 17:46:54 2025 user.notice dnsmasq: Allowing RFC1918 responses for domain ratings-wrs.symantec.com
Thu Mar 13 17:46:54 2025 daemon.info dnsmasq[1]: started, version 2.90 cachesize 1000
Thu Mar 13 17:46:54 2025 daemon.info dnsmasq[1]: DNS service limited to local subnets
Thu Mar 13 17:46:54 2025 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Mar 13 17:46:54 2025 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Thu Mar 13 17:46:54 2025 daemon.info dnsmasq[1]: using only locally-known addresses for test
Thu Mar 13 17:46:54 2025 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Thu Mar 13 17:46:54 2025 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Thu Mar 13 17:46:54 2025 daemon.info dnsmasq[1]: using only locally-known addresses for local
Thu Mar 13 17:46:54 2025 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Thu Mar 13 17:46:54 2025 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Thu Mar 13 17:46:54 2025 daemon.info dnsmasq[1]: using only locally-known addresses for home
Thu Mar 13 17:46:54 2025 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Thu Mar 13 17:46:54 2025 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Thu Mar 13 17:46:54 2025 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 148 names
Thu Mar 13 17:46:56 2025 user.notice : Added device handler type: bonding
Thu Mar 13 17:46:56 2025 user.notice : Added device handler type: 8021ad
Thu Mar 13 17:46:56 2025 user.notice : Added device handler type: 8021q
Thu Mar 13 17:46:56 2025 user.notice : Added device handler type: macvlan
Thu Mar 13 17:46:56 2025 user.notice : Added device handler type: veth
Thu Mar 13 17:46:56 2025 user.notice : Added device handler type: bridge
Thu Mar 13 17:46:56 2025 user.notice : Added device handler type: Network device
Thu Mar 13 17:46:56 2025 user.notice : Added device handler type: tunnel
Thu Mar 13 17:46:56 2025 daemon.notice procd: /etc/rc.d/S25packet_steering: uci: Entry not found
Thu Mar 13 17:46:56 2025 daemon.notice wpa_supplicant[2365]: Successfully initialized wpa_supplicant
Thu Mar 13 17:46:56 2025 cron.info crond[2750]: crond (busybox 1.36.1) started, log level 5
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.155100] mtk_soc_eth 15100000.ethernet eth0: Link is Down
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.171926] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.180406] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.180490] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.198674] device eth0 entered promiscuous mode
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.203717] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.213697] br-lan: port 1(lan1) entered blocking state
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.218919] br-lan: port 1(lan1) entered disabled state
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.225469] device lan1 entered promiscuous mode
Thu Mar 13 17:46:57 2025 daemon.notice netifd: Interface 'lan' is enabled
Thu Mar 13 17:46:57 2025 daemon.notice netifd: Interface 'lan' is setting up now
Thu Mar 13 17:46:57 2025 daemon.notice netifd: Interface 'lan' is now up
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.240042] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.249860] br-lan: port 2(lan2) entered blocking state
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.255081] br-lan: port 2(lan2) entered disabled state
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.262074] device lan2 entered promiscuous mode
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.272999] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.282873] br-lan: port 3(lan3) entered blocking state
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.288150] br-lan: port 3(lan3) entered disabled state
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.295292] device lan3 entered promiscuous mode
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.306449] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.316339] br-lan: port 4(lan4) entered blocking state
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.321585] br-lan: port 4(lan4) entered disabled state
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.328813] device lan4 entered promiscuous mode
Thu Mar 13 17:46:57 2025 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.337673] mt7530-mdio mdio-bus:1f lan5: configuring for phy/2500base-x link mode
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.347026] br-lan: port 5(lan5) entered blocking state
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.352303] br-lan: port 5(lan5) entered disabled state
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.359745] device lan5 entered promiscuous mode
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.368400] mtk_soc_eth 15100000.ethernet eth1: PHY [mdio-bus:06] driver [Maxlinear Ethernet GPY211C] (irq=POLL)
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.378655] mtk_soc_eth 15100000.ethernet eth1: configuring for phy/2500base-x link mode
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.388268] br-lan: port 6(eth1) entered blocking state
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.393491] br-lan: port 6(eth1) entered disabled state
Thu Mar 13 17:46:57 2025 kern.info kernel: [   32.398888] device eth1 entered promiscuous mode
Thu Mar 13 17:46:57 2025 daemon.notice netifd: Interface 'loopback' is enabled
Thu Mar 13 17:46:57 2025 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Mar 13 17:46:57 2025 daemon.notice netifd: Interface 'loopback' is now up
Thu Mar 13 17:46:57 2025 daemon.notice netifd: Interface 'wan' is enabled
Thu Mar 13 17:46:57 2025 daemon.notice netifd: Interface 'hotspot' is enabled
Thu Mar 13 17:46:57 2025 daemon.notice netifd: Interface 'hotspot' is setting up now
Thu Mar 13 17:46:57 2025 daemon.notice netifd: Interface 'hotspot' is now up
Thu Mar 13 17:46:57 2025 daemon.notice netifd: Network device 'eth0' link is up
Thu Mar 13 17:46:57 2025 daemon.notice netifd: Network device 'lo' link is up
Thu Mar 13 17:46:57 2025 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Mar 13 17:46:57 2025 daemon.notice netifd: Network device 'eth2' link is up
Thu Mar 13 17:46:57 2025 daemon.notice netifd: Interface 'wan' has link connectivity
Thu Mar 13 17:46:57 2025 daemon.notice netifd: Interface 'wan' is setting up now
Thu Mar 13 17:46:57 2025 daemon.notice netifd: radio1 (2949): WARNING: Variable 'data' does not exist or is not an array/object
Thu Mar 13 17:46:57 2025 daemon.notice netifd: radio0 (2948): WARNING: Variable 'data' does not exist or is not an array/object
Thu Mar 13 17:46:57 2025 daemon.notice netifd: wan (2974): udhcpc: started, v1.36.1
Thu Mar 13 17:46:57 2025 daemon.notice netifd: wan (2974): udhcpc: broadcasting discover
Thu Mar 13 17:46:57 2025 daemon.err nlbwmon[3014]: The netlink receive buffer size of 10485760 bytes will be capped to 212992 bytes
Thu Mar 13 17:46:57 2025 daemon.err nlbwmon[3014]: by the kernel. The net.core.rmem_max sysctl limit needs to be raised to
Thu Mar 13 17:46:57 2025 daemon.err nlbwmon[3014]: at least 10485760 in order to sucessfully set the desired receive buffer size!
Thu Mar 13 17:46:57 2025 daemon.notice netifd: wan (2974): udhcpc: broadcasting select for 192.168.8.100, server 192.168.8.1
Thu Mar 13 17:46:58 2025 daemon.err collectd[3123]: configfile: stat (/etc/collectd/conf.d/*.conf) failed: No such file or directory
Thu Mar 13 17:46:58 2025 daemon.err collectd[3123]: plugin_load: plugin "cpu" successfully loaded.
Thu Mar 13 17:46:58 2025 daemon.notice netifd: wan (2974): udhcpc: lease of 192.168.8.100 obtained from 192.168.8.1, lease time 86400
Thu Mar 13 17:46:58 2025 daemon.err collectd[3123]: plugin_load: plugin "interface" successfully loaded.
Thu Mar 13 17:46:58 2025 daemon.err collectd[3123]: plugin_load: plugin "iwinfo" successfully loaded.
Thu Mar 13 17:46:58 2025 daemon.err collectd[3123]: plugin_load: plugin "load" successfully loaded.
Thu Mar 13 17:46:58 2025 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/network
Thu Mar 13 17:46:58 2025 daemon.err collectd[3123]: plugin_load: plugin "memory" successfully loaded.
Thu Mar 13 17:46:58 2025 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/wireless
Thu Mar 13 17:46:58 2025 daemon.err collectd[3123]: plugin_load: plugin "network" successfully loaded.
Thu Mar 13 17:46:58 2025 user.notice ucitrack: Setting up /etc/config/luci-splash reload dependency on /etc/config/firewall
Thu Mar 13 17:46:58 2025 user.notice ucitrack: Setting up /etc/config/qos reload dependency on /etc/config/firewall
Thu Mar 13 17:46:58 2025 user.notice ucitrack: Setting up /etc/config/miniupnpd reload dependency on /etc/config/firewall
Thu Mar 13 17:46:58 2025 daemon.notice netifd: Interface 'wan' is now up
Thu Mar 13 17:46:58 2025 daemon.info dnsmasq[1]: reading /tmp/resolv.conf.d/resolv.conf.auto
Thu Mar 13 17:46:58 2025 daemon.info dnsmasq[1]: using nameserver 192.168.8.1#53
Thu Mar 13 17:46:58 2025 daemon.info dnsmasq[1]: using nameserver 192.168.8.1#53
Thu Mar 13 17:46:58 2025 daemon.info dnsmasq[1]: using only locally-known addresses for test
Thu Mar 13 17:46:58 2025 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Thu Mar 13 17:46:58 2025 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Thu Mar 13 17:46:58 2025 daemon.info dnsmasq[1]: using only locally-known addresses for local
Thu Mar 13 17:46:58 2025 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Thu Mar 13 17:46:58 2025 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Thu Mar 13 17:46:58 2025 daemon.info dnsmasq[1]: using only locally-known addresses for home
Thu Mar 13 17:46:58 2025 user.notice nlbwmon: Reloading nlbwmon due to ifup of lan (br-lan)
Thu Mar 13 17:46:58 2025 user.notice ucitrack: Setting up /etc/config/odhcpd reload dependency on /etc/config/dhcp
Thu Mar 13 17:46:58 2025 daemon.err collectd[3123]: plugin_load: plugin "openvpn" successfully loaded.
Thu Mar 13 17:46:58 2025 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Thu Mar 13 17:46:58 2025 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Thu Mar 13 17:46:58 2025 daemon.err collectd[3123]: plugin_load: plugin "ping" successfully loaded.
Thu Mar 13 17:46:58 2025 user.notice ucitrack: Setting up /etc/config/luci_statistics reload dependency on /etc/config/system
Thu Mar 13 17:46:58 2025 authpriv.warn dropbear[3590]: Failed listening on '22': Error listening: Address not available
Thu Mar 13 17:46:58 2025 authpriv.info dropbear[3590]: Not backgrounding
Thu Mar 13 17:46:58 2025 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/system
Thu Mar 13 17:46:58 2025 daemon.err collectd[3123]: plugin_load: plugin "rrdtool" successfully loaded.
Thu Mar 13 17:46:58 2025 daemon.err collectd[3123]: rrdtool plugin: RRASingle = true: creating only AVERAGE RRAs
Thu Mar 13 17:46:58 2025 daemon.notice hostapd: Set new config for phy phy0:
Thu Mar 13 17:46:58 2025 daemon.notice hostapd: Set new config for phy phy1:
Thu Mar 13 17:46:58 2025 daemon.notice wpa_supplicant[2365]: Set new config for phy phy0
Thu Mar 13 17:46:58 2025 daemon.notice wpa_supplicant[2365]: Set new config for phy phy1
Thu Mar 13 17:46:58 2025 daemon.err collectd[3123]: plugin_load: plugin "sensors" successfully loaded.
Thu Mar 13 17:46:58 2025 daemon.err collectd[3123]: plugin_load: plugin "thermal" successfully loaded.
Thu Mar 13 17:46:58 2025 daemon.err collectd[3123]: Initialization complete, entering read-loop.
Thu Mar 13 17:46:58 2025 daemon.notice netifd: radio0 (2948): sh: acs_survey: out of range
Thu Mar 13 17:46:58 2025 daemon.notice netifd: radio0 (2948): sh: acs_survey: out of range
Fri Jan  3 00:05:00 2025 daemon.notice procd: /etc/rc.d/S95done: 2025.01.03-00:05:00
Fri Jan  3 00:05:00 2025 daemon.notice wpa_supplicant[2365]: Set new config for phy phy0
install.sh - Aktualizacja systemu, sysinfo.sh - Info.o systemie, openvpn-auth.sh - Login dla OpenVPN
Tu moje skrypty na GitHub