Hello can someone help me to edit the configuration network from gargolye 1.13 and make it work to gargoyle 1.14?

My old config network :

config interface 'loopback'
    option ifname 'lo'
    option proto 'static'
    option ipaddr '127.0.0.1'
    option netmask '255.0.0.0'

config globals 'globals'
    option ula_prefix 'fd38:f2b4:68b1::/48'

config interface 'lan'
    option type 'bridge'
    option ifname 'eth0.1'
    option proto 'static'
    option netmask '255.255.255.0'
    option ip6assign '60'
    option dns '8.8.8.8 8.8.4.4 2001:4860:4860::8888 2001:4860:4860::8844'
    option ipaddr '192.168.12.1'
    option ip6ifaceid '::1'

config device 'lan_eth0_1_dev'
    option name 'eth0.1'
    option macaddr '80:2a:a8:9d:c8:35'

config interface 'wan'
    option proto 'pppoe'
    option password 'adsl'
    option ipv6 'auto'
    option username 'adsl'
    option mtu '1492'
    option ifname 'eth0.848'
    option keepalive '3 5'
    option macaddr '80:2a:a8:9d:c8:35'
    option dns '8.8.8.8 8.8.4.4'
    option peerdns '0'

config device 'wan_eth0_2_dev'
    option name 'eth0.2'
    option macaddr '80:2a:a8:9d:c8:36'

config interface 'wan6'
    option proto 'dhcpv6'
    option ifname 'eth0.848'
    option dns '2001:4860:4860::8888 2001:4860:4860::8844'
    option peerdns '0'

config switch
    option name 'switch0'
    option reset '1'
    option enable_vlan '1'

config switch_vlan
    option device 'switch0'
    option vlan '1'
    option ports '1 2 3 4 6t'
    option vid '1'

config switch_vlan
    option device 'switch0'
    option vlan '2'
    option ports '0t 6t'
    option vid '848'

THANK YOU