• Zarejestrowany: 2018-08-13
  • Posty: 216

Temat: Gargoyle X86 1.14 - niski download

Cześć,

Na takiej maszynce zainstalowałem Gargoyle X86.
CPU N3160
2 GB ram
Gargoyle gargoyle-1.14.0.3-generic-squashfs-combined-efi (1).img na karcie SD USB.

Download to ledwo 200Mbit.
Ma tym samym sprzęcie czyste openwrt radzi sobie dużo lepiej.

W czym może być problem.
Zależy mi na Gargoyle ze względu na prostotę obsługi i wbudowany WireGuard.


iperf3 z komputera w LAN do komputera po stronie WAN

C:\Users\Kacper\Downloads\iperf3.1.1_32>iperf3 -c 192.168.1.16
Connecting to host 192.168.1.16, port 5201
[  4] local 192.168.2.101 port 56908 connected to 192.168.1.16 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  65.3 MBytes   548 Mbits/sec
[  4]   1.00-2.00   sec  55.7 MBytes   467 Mbits/sec
[  4]   2.00-3.00   sec  68.3 MBytes   573 Mbits/sec
[  4]   3.00-4.00   sec  68.4 MBytes   574 Mbits/sec
[  4]   4.00-5.00   sec  69.3 MBytes   582 Mbits/sec
[  4]   5.00-6.00   sec  68.1 MBytes   571 Mbits/sec
[  4]   6.00-7.00   sec  69.6 MBytes   584 Mbits/sec
[  4]   7.00-8.00   sec  67.6 MBytes   567 Mbits/sec
[  4]   8.00-9.00   sec  67.3 MBytes   565 Mbits/sec
[  4]   9.00-10.00  sec  67.0 MBytes   562 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec   667 MBytes   559 Mbits/sec                  sender
[  4]   0.00-10.00  sec   667 MBytes   559 Mbits/sec                  receiver

iperf Done.

C:\Users\Kacper\Downloads\iperf3.1.1_32>iperf3 -c 192.168.1.16 -R
Connecting to host 192.168.1.16, port 5201
Reverse mode, remote host 192.168.1.16 is sending
[  4] local 192.168.2.101 port 56916 connected to 192.168.1.16 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  32.5 MBytes   273 Mbits/sec
[  4]   1.00-2.00   sec  31.7 MBytes   266 Mbits/sec
[  4]   2.00-3.00   sec  32.5 MBytes   273 Mbits/sec
[  4]   3.00-4.00   sec  30.7 MBytes   258 Mbits/sec
[  4]   4.00-5.00   sec  30.8 MBytes   258 Mbits/sec
[  4]   5.00-6.00   sec  31.3 MBytes   263 Mbits/sec
[  4]   6.00-7.00   sec  28.4 MBytes   238 Mbits/sec
[  4]   7.00-8.00   sec  28.0 MBytes   235 Mbits/sec
[  4]   8.00-9.00   sec  31.8 MBytes   266 Mbits/sec
[  4]   9.00-10.00  sec  32.0 MBytes   269 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec   310 MBytes   260 Mbits/sec    0             sender
[  4]   0.00-10.00  sec   310 MBytes   260 Mbits/sec                  receiver

iperf Done.

2 Odpowiedź przez ambrozy5 (edytowany przez ambrozy5 2024-07-26 06:18:34)

  • Zarejestrowany: 2015-01-27
  • Posty: 2,427

Odp: Gargoyle X86 1.14 - niski download

Na podobnym sprzecie z openwrt nie ma problemu ponad 2Gb przewalic na kartach intela. Cos masz niehalo, probowales opnsense/pfsense? Jakie tam układy lan?

Dom : router https://i.imgur.com/IuB6Zwy.png | TP-LINK T1700G-28TQ |Zyxel XGS-1210-12 | 6x Ruckus r310 unleashed  + Ruckus icx7150-c12p | Truenas scale 124TB 25Gb| Xpenology 12TB | apc smart ups 750 lcd smile 100Mb/s - 25Gb/s
Podróżne : GL.Inet MT3000  +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip  + panel 285Wp + lifepo4 12v 60Ah .

3 Odpowiedź przez kacperr

  • Zarejestrowany: 2018-08-13
  • Posty: 216

Odp: Gargoyle X86 1.14 - niski download

Na opnsense działa dużo lepiej ale jakoś mi nie po drodze z tym systemem.
Prostota Gargoyle kusi.

Karty to chyba "RTL8168h/8111h"

[   12.343106] r8169 0000:02:00.0 eth0: RTL8168h/8111h, 60:be:b4:15:cd:12, XID 541, IRQ 120
[   12.351124] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   12.407548] r8169 0000:03:00.0 eth1: RTL8168h/8111h, 60:be:b4:15:cd:13, XID 541, IRQ 121
[   12.429610] r8169 0000:03:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko]

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,919

Odp: Gargoyle X86 1.14 - niski download

Jakie masz prędkości na zwykłym openwrt, 22.03? (koniecznie na tym, bo na tej wersji jest gagroyle 1.14 oparte).

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez kacperr (edytowany przez kacperr 2024-07-26 08:21:30)

  • Zarejestrowany: 2018-08-13
  • Posty: 216

Odp: Gargoyle X86 1.14 - niski download

No to lecimy
Wgrane OpenWrt 22.03 z pliku "luci-22.03-snapshot-r20343-4e1d1b7df0-x86-64-generic-squashfs-combined-efi"

Klient na LAN 1 Gbit, server to PC po stronie WAN karta 1 Gbit.

Wygląda problem po stronie LAN.


iperf3 klient-router-serwer
C:\Users\X\Downloads\iperf3.1.1_32>iperf3 -c 192.168.1.16
Connecting to host 192.168.1.16, port 5201
[  4] local 192.168.2.101 port 53200 connected to 192.168.1.16 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  49.4 MBytes   414 Mbits/sec
[  4]   1.00-2.00   sec  54.1 MBytes   454 Mbits/sec
[  4]   2.00-3.00   sec  50.4 MBytes   423 Mbits/sec
[  4]   3.00-4.00   sec  53.7 MBytes   450 Mbits/sec
[  4]   4.00-5.00   sec  56.0 MBytes   470 Mbits/sec
[  4]   5.00-6.00   sec  63.4 MBytes   532 Mbits/sec
[  4]   6.00-7.00   sec  57.4 MBytes   482 Mbits/sec
[  4]   7.00-8.00   sec  55.9 MBytes   469 Mbits/sec
[  4]   8.00-9.00   sec  53.9 MBytes   452 Mbits/sec
[  4]   9.00-10.00  sec  57.5 MBytes   483 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec   552 MBytes   463 Mbits/sec                  sender
[  4]   0.00-10.00  sec   552 MBytes   463 Mbits/sec                  receiver

iperf Done.

C:\Users\X\Downloads\iperf3.1.1_32>iperf3 -c 192.168.1.16 -R
Connecting to host 192.168.1.16, port 5201
Reverse mode, remote host 192.168.1.16 is sending
[  4] local 192.168.2.101 port 53203 connected to 192.168.1.16 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  42.5 MBytes   357 Mbits/sec
[  4]   1.00-2.00   sec  43.7 MBytes   367 Mbits/sec
[  4]   2.00-3.00   sec  40.1 MBytes   336 Mbits/sec
[  4]   3.00-4.00   sec  45.9 MBytes   385 Mbits/sec
[  4]   4.00-5.00   sec  46.4 MBytes   389 Mbits/sec
[  4]   5.00-6.00   sec  43.1 MBytes   362 Mbits/sec
[  4]   6.00-7.00   sec  42.8 MBytes   359 Mbits/sec
[  4]   7.00-8.00   sec  42.1 MBytes   353 Mbits/sec
[  4]   8.00-9.00   sec  38.0 MBytes   319 Mbits/sec
[  4]   9.00-10.00  sec  42.9 MBytes   360 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec   428 MBytes   359 Mbits/sec    4             sender
[  4]   0.00-10.00  sec   428 MBytes   359 Mbits/sec                  receiver

iperf Done.


Test WAN:
iperf3 client to router X86 OpenWrt 22.03 - serwer to PC po stronie WAN
root@OpenWrt:~# iperf3 -c 192.168.1.16
Connecting to host 192.168.1.16, port 5201
[  5] local 192.168.1.239 port 57818 connected to 192.168.1.16 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   113 MBytes   950 Mbits/sec    0    378 KBytes
[  5]   1.00-2.00   sec   111 MBytes   930 Mbits/sec    0    397 KBytes
[  5]   2.00-3.00   sec   112 MBytes   935 Mbits/sec    0    397 KBytes
[  5]   3.00-4.00   sec   111 MBytes   934 Mbits/sec    0    397 KBytes
[  5]   4.00-5.00   sec   111 MBytes   932 Mbits/sec    0    397 KBytes
[  5]   5.00-6.00   sec   111 MBytes   933 Mbits/sec    0    397 KBytes
[  5]   6.00-7.00   sec   112 MBytes   940 Mbits/sec    0    397 KBytes
[  5]   7.00-8.00   sec   112 MBytes   936 Mbits/sec    0    419 KBytes
[  5]   8.00-9.00   sec   112 MBytes   936 Mbits/sec    0    419 KBytes
[  5]   9.00-10.00  sec   111 MBytes   933 Mbits/sec    0    419 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  1.09 GBytes   936 Mbits/sec    0             sender
[  5]   0.00-10.00  sec  1.09 GBytes   935 Mbits/sec                  receiver

iperf Done.
root@OpenWrt:~# iperf3 -c 192.168.1.16 -R
Connecting to host 192.168.1.16, port 5201
Reverse mode, remote host 192.168.1.16 is sending
[  5] local 192.168.1.239 port 39888 connected to 192.168.1.16 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec   112 MBytes   939 Mbits/sec
[  5]   1.00-2.00   sec   112 MBytes   942 Mbits/sec
[  5]   2.00-3.00   sec   112 MBytes   940 Mbits/sec
[  5]   3.00-4.00   sec   112 MBytes   941 Mbits/sec
[  5]   4.00-5.00   sec   112 MBytes   941 Mbits/sec
[  5]   5.00-6.00   sec   112 MBytes   940 Mbits/sec
[  5]   6.00-7.00   sec   112 MBytes   940 Mbits/sec
[  5]   7.00-8.00   sec   112 MBytes   941 Mbits/sec
[  5]   8.00-9.00   sec   112 MBytes   940 Mbits/sec
[  5]   9.00-10.00  sec   112 MBytes   941 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  1.10 GBytes   943 Mbits/sec    0             sender
[  5]   0.00-10.00  sec  1.09 GBytes   940 Mbits/sec                  receiver

iperf Done.

Test LAN:
iperf3 client to PC po stronie LAN - router X86 OpenWrt 22.03
C:\Users\X\Downloads\iperf3.1.1_32>iperf3 -c 192.168.2.1
Connecting to host 192.168.2.1, port 5201
[  4] local 192.168.2.101 port 53213 connected to 192.168.2.1 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  52.4 MBytes   439 Mbits/sec
[  4]   1.00-2.00   sec  61.6 MBytes   517 Mbits/sec
[  4]   2.00-3.01   sec  59.3 MBytes   495 Mbits/sec
[  4]   3.01-4.00   sec  65.5 MBytes   552 Mbits/sec
[  4]   4.00-5.00   sec  57.2 MBytes   479 Mbits/sec
[  4]   5.00-6.00   sec  69.1 MBytes   581 Mbits/sec
[  4]   6.00-7.00   sec  57.9 MBytes   486 Mbits/sec
[  4]   7.00-8.00   sec  54.9 MBytes   461 Mbits/sec
[  4]   8.00-9.00   sec  61.4 MBytes   515 Mbits/sec
[  4]   9.00-10.01  sec  61.0 MBytes   505 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.01  sec   600 MBytes   503 Mbits/sec                  sender
[  4]   0.00-10.01  sec   600 MBytes   503 Mbits/sec                  receiver

iperf Done.

C:\Users\X\Downloads\iperf3.1.1_32>iperf3 -c 192.168.2.1 -R
Connecting to host 192.168.2.1, port 5201
Reverse mode, remote host 192.168.2.1 is sending
[  4] local 192.168.2.101 port 53215 connected to 192.168.2.1 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  36.1 MBytes   303 Mbits/sec
[  4]   1.00-2.00   sec  35.3 MBytes   296 Mbits/sec
[  4]   2.00-3.00   sec  37.4 MBytes   314 Mbits/sec
[  4]   3.00-4.00   sec  35.4 MBytes   297 Mbits/sec
[  4]   4.00-5.00   sec  35.4 MBytes   297 Mbits/sec
[  4]   5.00-6.01   sec  34.2 MBytes   283 Mbits/sec
[  4]   6.01-7.00   sec  36.6 MBytes   311 Mbits/sec
[  4]   7.00-8.00   sec  33.0 MBytes   277 Mbits/sec
[  4]   8.00-9.00   sec  33.1 MBytes   278 Mbits/sec
[  4]   9.00-10.00  sec  33.7 MBytes   283 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec   351 MBytes   294 Mbits/sec    9             sender
[  4]   0.00-10.00  sec   350 MBytes   294 Mbits/sec                  receiver

iperf Done.

6 Odpowiedź przez Cezary (edytowany przez Cezary 2024-07-26 09:37:16)

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,919

Odp: Gargoyle X86 1.14 - niski download

Czy ta maszynka po stronie lan ma kartę sieciową na pci czy ona jest wbudowania?
Zamień w konfigu interfejsy lan i wan miejscami i zobacz czy od strony wanu też będzie tylko 200. Jeżeli tak to zwalona jest karta sieciowa lub jej sterownik.

Zainstalowałeś mój obraz 22.03, w repo u mnie znajdziesz także sterownik kmod-realtek-r8168 który jest od realteka. Możesz go zainstalować zamiast tego z kernela (odinstaluj kmod-r8169 i zrestartuj)  i zobaczysz czy to coś da.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez kacperr

  • Zarejestrowany: 2018-08-13
  • Posty: 216

Odp: Gargoyle X86 1.14 - niski download

Karta zintegrowana w laptopie.
Generalnie daje radę z każdym innym routerem i systemem.

Zainstalowałem jeszcze raz openwrt na nowym pendrive.

LAN-server
domyślny r8169
C:\Users\Kacper\Downloads\iperf3.1.1_32>iperf3 -c 192.168.2.1
Connecting to host 192.168.2.1, port 5201
[  4] local 192.168.2.101 port 62338 connected to 192.168.2.1 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec   111 MBytes   932 Mbits/sec
[  4]   1.00-2.00   sec   112 MBytes   935 Mbits/sec
[  4]   2.00-3.00   sec   106 MBytes   886 Mbits/sec
[  4]   3.00-4.00   sec   111 MBytes   934 Mbits/sec
[  4]   4.00-5.00   sec   112 MBytes   937 Mbits/sec
[  4]   5.00-6.00   sec   112 MBytes   938 Mbits/sec
[  4]   6.00-7.00   sec   112 MBytes   936 Mbits/sec
[  4]   7.00-8.00   sec   111 MBytes   934 Mbits/sec
[  4]   8.00-9.00   sec   112 MBytes   938 Mbits/sec
[  4]   9.00-10.00  sec   111 MBytes   935 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec  1.08 GBytes   930 Mbits/sec                  sender
[  4]   0.00-10.00  sec  1.08 GBytes   930 Mbits/sec                  receiver

iperf Done.

C:\Users\Kacper\Downloads\iperf3.1.1_32>iperf3 -c 192.168.2.1 -R
Connecting to host 192.168.2.1, port 5201
Reverse mode, remote host 192.168.2.1 is sending
[  4] local 192.168.2.101 port 62341 connected to 192.168.2.1 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  65.9 MBytes   553 Mbits/sec
[  4]   1.00-2.00   sec  59.4 MBytes   499 Mbits/sec
[  4]   2.00-3.00   sec  64.0 MBytes   537 Mbits/sec
[  4]   3.00-4.00   sec  62.6 MBytes   525 Mbits/sec
[  4]   4.00-5.00   sec  63.0 MBytes   529 Mbits/sec
[  4]   5.00-6.00   sec  64.1 MBytes   538 Mbits/sec
[  4]   6.00-7.00   sec  66.7 MBytes   560 Mbits/sec
[  4]   7.00-8.00   sec  71.8 MBytes   602 Mbits/sec
[  4]   8.00-9.00   sec  69.8 MBytes   586 Mbits/sec
[  4]   9.00-10.00  sec  65.0 MBytes   546 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec   653 MBytes   548 Mbits/sec    0             sender
[  4]   0.00-10.00  sec   653 MBytes   548 Mbits/sec                  receiver

iperf Done.
PC LAN - SERVER -  PC WAN 
C:\Users\Kacper \Downloads\iperf3.1.1_32>iperf3 -c 192.168.1.16
Connecting to host 192.168.1.16, port 5201
[  4] local 192.168.2.101 port 62356 connected to 192.168.1.16 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  56.2 MBytes   471 Mbits/sec
[  4]   1.00-2.00   sec  58.7 MBytes   492 Mbits/sec
[  4]   2.00-3.00   sec  58.7 MBytes   492 Mbits/sec
[  4]   3.00-4.00   sec  59.4 MBytes   498 Mbits/sec
[  4]   4.00-5.00   sec  58.5 MBytes   491 Mbits/sec
[  4]   5.00-6.00   sec  59.6 MBytes   500 Mbits/sec
[  4]   6.00-7.00   sec  59.2 MBytes   497 Mbits/sec
[  4]   7.00-8.00   sec  59.1 MBytes   496 Mbits/sec
[  4]   8.00-9.00   sec  59.3 MBytes   498 Mbits/sec
[  4]   9.00-10.00  sec  58.8 MBytes   493 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec   588 MBytes   493 Mbits/sec                  sender
[  4]   0.00-10.00  sec   587 MBytes   493 Mbits/sec                  receiver

iperf Done.

C:\Users\Kacper \Downloads\iperf3.1.1_32>iperf3 -c 192.168.1.16 -R
Connecting to host 192.168.1.16, port 5201
Reverse mode, remote host 192.168.1.16 is sending
[  4] local 192.168.2.101 port 62358 connected to 192.168.1.16 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  48.4 MBytes   406 Mbits/sec
[  4]   1.00-2.00   sec  52.4 MBytes   439 Mbits/sec
[  4]   2.00-3.00   sec  51.0 MBytes   428 Mbits/sec
[  4]   3.00-4.00   sec  52.6 MBytes   441 Mbits/sec
[  4]   4.00-5.00   sec  51.9 MBytes   435 Mbits/sec
[  4]   5.00-6.00   sec  51.4 MBytes   431 Mbits/sec
[  4]   6.00-7.00   sec  50.0 MBytes   419 Mbits/sec
[  4]   7.00-8.00   sec  52.4 MBytes   439 Mbits/sec
[  4]   8.00-9.00   sec  52.2 MBytes   438 Mbits/sec
[  4]   9.00-10.00  sec  49.2 MBytes   413 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec   512 MBytes   429 Mbits/sec    1             sender
[  4]   0.00-10.00  sec   511 MBytes   429 Mbits/sec                  receiver

iperf Done.
SERVER - PC WAN

tu leci FULL 1 Gbit

8 Odpowiedź przez kacperr (edytowany przez kacperr 2024-07-26 12:03:54)

  • Zarejestrowany: 2018-08-13
  • Posty: 216

Odp: Gargoyle X86 1.14 - niski download

R8168
PC LAN - SERVER 
C:\Users\Kacper \Downloads\iperf3.1.1_32>iperf3 -c 192.168.2.1
Connecting to host 192.168.2.1, port 5201
[  4] local 192.168.2.101 port 56507 connected to 192.168.2.1 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec   110 MBytes   922 Mbits/sec
[  4]   1.00-2.00   sec   110 MBytes   925 Mbits/sec
[  4]   2.00-3.00   sec   111 MBytes   933 Mbits/sec
[  4]   3.00-4.00   sec   111 MBytes   935 Mbits/sec
[  4]   4.00-5.00   sec   111 MBytes   929 Mbits/sec
[  4]   5.00-6.00   sec   110 MBytes   920 Mbits/sec
[  4]   6.00-7.00   sec  96.1 MBytes   806 Mbits/sec
[  4]   7.00-8.00   sec   111 MBytes   932 Mbits/sec
[  4]   8.00-9.00   sec   110 MBytes   922 Mbits/sec
[  4]   9.00-10.00  sec   102 MBytes   858 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec  1.06 GBytes   908 Mbits/sec                  sender
[  4]   0.00-10.00  sec  1.06 GBytes   908 Mbits/sec                  receiver

iperf Done.

C:\Users\Kacper \Downloads\iperf3.1.1_32>iperf3 -c 192.168.2.1 -R
Connecting to host 192.168.2.1, port 5201
Reverse mode, remote host 192.168.2.1 is sending
[  4] local 192.168.2.101 port 56510 connected to 192.168.2.1 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  59.9 MBytes   503 Mbits/sec
[  4]   1.00-2.00   sec  65.0 MBytes   545 Mbits/sec
[  4]   2.00-3.00   sec  64.8 MBytes   543 Mbits/sec
[  4]   3.00-4.00   sec  86.6 MBytes   726 Mbits/sec
[  4]   4.00-5.00   sec  66.3 MBytes   556 Mbits/sec
[  4]   5.00-6.00   sec  88.1 MBytes   739 Mbits/sec
[  4]   6.00-7.00   sec  65.6 MBytes   550 Mbits/sec
[  4]   7.00-8.00   sec  62.1 MBytes   521 Mbits/sec
[  4]   8.00-9.00   sec  81.6 MBytes   685 Mbits/sec
[  4]   9.00-10.00  sec  94.3 MBytes   791 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec   735 MBytes   616 Mbits/sec    0             sender
[  4]   0.00-10.00  sec   734 MBytes   616 Mbits/sec                  receiver

iperf Done.
PC LAN - SERVER - PC WAN
C:\Users\Kacper \Downloads\iperf3.1.1_32>iperf3 -c 192.168.1.16
Connecting to host 192.168.1.16, port 5201
[  4] local 192.168.2.101 port 56526 connected to 192.168.1.16 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  54.4 MBytes   456 Mbits/sec
[  4]   1.00-2.00   sec  55.5 MBytes   466 Mbits/sec
[  4]   2.00-3.00   sec  55.3 MBytes   464 Mbits/sec
[  4]   3.00-4.00   sec  54.9 MBytes   461 Mbits/sec
[  4]   4.00-5.00   sec  54.9 MBytes   460 Mbits/sec
[  4]   5.00-6.00   sec  53.5 MBytes   449 Mbits/sec
[  4]   6.00-7.00   sec  52.8 MBytes   443 Mbits/sec
[  4]   7.00-8.00   sec  53.0 MBytes   444 Mbits/sec
[  4]   8.00-9.00   sec  54.4 MBytes   456 Mbits/sec
[  4]   9.00-10.00  sec  56.1 MBytes   471 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec   545 MBytes   457 Mbits/sec                  sender
[  4]   0.00-10.00  sec   545 MBytes   457 Mbits/sec                  receiver

iperf Done.

C:\Users\Kacper \Downloads\iperf3.1.1_32>iperf3 -c 192.168.1.16 -R
Connecting to host 192.168.1.16, port 5201
Reverse mode, remote host 192.168.1.16 is sending
[  4] local 192.168.2.101 port 56529 connected to 192.168.1.16 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  40.4 MBytes   339 Mbits/sec
[  4]   1.00-2.00   sec  41.8 MBytes   350 Mbits/sec
[  4]   2.00-3.00   sec  41.5 MBytes   348 Mbits/sec
[  4]   3.00-4.00   sec  41.0 MBytes   344 Mbits/sec
[  4]   4.00-5.00   sec  40.8 MBytes   343 Mbits/sec
[  4]   5.00-6.00   sec  38.8 MBytes   326 Mbits/sec
[  4]   6.00-7.00   sec  41.4 MBytes   347 Mbits/sec
[  4]   7.00-8.00   sec  41.5 MBytes   348 Mbits/sec
[  4]   8.00-9.00   sec  41.9 MBytes   351 Mbits/sec
[  4]   9.00-10.00  sec  41.6 MBytes   349 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec   411 MBytes   345 Mbits/sec    0             sender
[  4]   0.00-10.00  sec   411 MBytes   345 Mbits/sec                  receiver

iperf Done.

SERVER - PC WAN

leci full Gbit

9 Odpowiedź przez kacperr

  • Zarejestrowany: 2018-08-13
  • Posty: 216

Odp: Gargoyle X86 1.14 - niski download

Wygląda na to, że brakowało "packet_steering" smile

Po włączeniu leci 500mbit. Nie jest to pełny gigabit ale na moje łącze jest OK.

Potestuję jeszcze.

10 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,919

Odp: Gargoyle X86 1.14 - niski download

To jeszcze masz irqbalance i sam flow offloading.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

11 Odpowiedź przez kacperr

  • Zarejestrowany: 2018-08-13
  • Posty: 216

Odp: Gargoyle X86 1.14 - niski download

irqbalance trochę pomaga ale niewiele.
flow_ofloading rozwala wyresy w Gargoyle.

Zaskoczony jestem, że rouring i NAT i firewall wymagają aż tyle mocy obliczeniowej.

Kupiłem NanoPI R2S - nie daje rady z pppoe i 500mbit łącze.
Nawet intel CPU N100 nie daje rady z pełnym gigabitem (text IPERF3 PC LAN - SRV - PC WAN).

Bardzo to dziwne bo ludzie piszą, że ich openwrt na     Qualcomm IPQ4019 wyciąga 800Mbit bez flow offload i z PPPoE.  To sciema?

Nie ch

12 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,919

Odp: Gargoyle X86 1.14 - niski download

Z pppoe tak jest, wyjaśniali to na forum openwrt czemu to potrzebuje tyke mocy.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

13 Odpowiedź przez kacperr

  • Zarejestrowany: 2018-08-13
  • Posty: 216

Odp: Gargoyle X86 1.14 - niski download

No tak, zmyliły mnie jednak komentarze niektórych użytkowników, że "u nich działa". Myślałem, że robię coś źle.

Tu jest coś
https://forum.openwrt.org/t/so-you-have … irst/90305

i tu
https://forum.openwrt.org/t/minimum-har … ion/184365

14 Odpowiedź przez ambrozy5

  • Zarejestrowany: 2015-01-27
  • Posty: 2,427

Odp: Gargoyle X86 1.14 - niski download

Czytając tamte tematy to potrzebujesz conajmniej i5 nie za starej generacji... Atom c2558  z pfsense nie ma problemu ogarnąć 900Mbps przy torrentowaniu . Być może jest tam problem z przerwaniani, lany realteka nie pomagają.

Dom : router https://i.imgur.com/IuB6Zwy.png | TP-LINK T1700G-28TQ |Zyxel XGS-1210-12 | 6x Ruckus r310 unleashed  + Ruckus icx7150-c12p | Truenas scale 124TB 25Gb| Xpenology 12TB | apc smart ups 750 lcd smile 100Mb/s - 25Gb/s
Podróżne : GL.Inet MT3000  +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip  + panel 285Wp + lifepo4 12v 60Ah .

15 Odpowiedź przez kacperr

  • Zarejestrowany: 2018-08-13
  • Posty: 216

Odp: Gargoyle X86 1.14 - niski download

Niestety ale coś w tym jest.
Właśnie przełączyłem N3160 jako główny router z PPPoE i lipa.
Ledwo 250Mbit wyciąga przy irqbalance + packet_steering.
Flow offload nie używam bo rozwala statystyki Gargoyle.

Zaczynam testy N100. Jednak ten procek to i5 klasa chyba musi być.

16 Odpowiedź przez kacperr

  • Zarejestrowany: 2018-08-13
  • Posty: 216

Odp: Gargoyle X86 1.14 - niski download

Poprawka - wygląda na to że software flow offload nie rozwala statystyk w Gargoyle. Sprawdzam dalej.

17 Odpowiedź przez jarek7714 (edytowany przez jarek7714 2024-08-03 21:31:32)

  • Zarejestrowany: 2012-01-13
  • Posty: 1,519

Odp: Gargoyle X86 1.14 - niski download

kacperr napisał/a:

Niestety ale coś w tym jest.
Właśnie przełączyłem N3160 jako główny router z PPPoE i lipa.
Ledwo 250Mbit wyciąga przy irqbalance + packet_steering.
Flow offload nie używam bo rozwala statystyki Gargoyle.

Jeżeli nie wymagamy równolegle wydajnego serwera VPN, to włączenie flow offload https://eko.one.pl/?p=openwrt-konfiguracja. , spokojnie daje radę z łączem 500Mbps/nie generując obciążenia CPU.                                                                        https://www.speedtest.net/result/16579147287.png