Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Oprogramowanie / Software → Iperf - testy
Strony Poprzednia 1 2
Zaloguj się lub zarejestruj by napisać odpowiedź
No ale iperf robi test tyko w jedną stronę tylko. Jeżeli masz łącze 100uploadu to właśnie masz tyle w teście. Dodaj opcję --bidir
A czyli to testuje upload ok. Cholera pogubiłem się ok to jak testować tylko download jaka komenda?
No --bidir dodaj do polecenia.
root@openwrt:~# iperf3 -c speedtest-w5-rnp.play.pl --bidir
Connecting to host speedtest-w5-rnp.play.pl, port 5201
[ 5] local 192.168.0.210 port 58138 connected to 89.108.202.10 port 5201
[ 7] local 192.168.0.210 port 58146 connected to 89.108.202.10 port 5201
[ ID][Role] Interval Transfer Bitrate Retr Cwnd
[ 5][TX-C] 0.00-1.00 sec 13.2 MBytes 111 Mbits/sec 0 631 KBytes
[ 7][RX-C] 0.00-1.00 sec 1.00 Bytes 8.00 bits/sec
[ 5][TX-C] 1.00-2.00 sec 10.0 MBytes 83.9 Mbits/sec 1 751 KBytes
[ 7][RX-C] 1.00-2.00 sec 0.00 Bytes 0.00 bits/sec
[ 5][TX-C] 2.00-3.00 sec 10.0 MBytes 83.9 Mbits/sec 6 281 KBytes
[ 7][RX-C] 2.00-3.00 sec 0.00 Bytes 0.00 bits/sec
[ 5][TX-C] 3.00-4.00 sec 11.2 MBytes 94.4 Mbits/sec 1 221 KBytes
[ 7][RX-C] 3.00-4.00 sec 0.00 Bytes 0.00 bits/sec
[ 5][TX-C] 4.00-5.00 sec 10.0 MBytes 83.9 Mbits/sec 0 253 KBytes
[ 7][RX-C] 4.00-5.00 sec 0.00 Bytes 0.00 bits/sec
[ 5][TX-C] 5.00-6.00 sec 10.0 MBytes 83.9 Mbits/sec 0 283 KBytes
[ 7][RX-C] 5.00-6.00 sec 0.00 Bytes 0.00 bits/sec
[ 5][TX-C] 6.00-7.00 sec 10.0 MBytes 83.9 Mbits/sec 0 308 KBytes
[ 7][RX-C] 6.00-7.00 sec 0.00 Bytes 0.00 bits/sec
[ 5][TX-C] 7.00-8.00 sec 10.0 MBytes 83.9 Mbits/sec 0 334 KBytes
[ 7][RX-C] 7.00-8.00 sec 0.00 Bytes 0.00 bits/sec
[ 5][TX-C] 8.00-9.00 sec 10.0 MBytes 83.9 Mbits/sec 0 356 KBytes
[ 7][RX-C] 8.00-9.00 sec 0.00 Bytes 0.00 bits/sec
WARNING: Size of data read does not correspond to offered length
iperf3: error - unable to receive results: Resource temporarily unavailable
root@:~#
Inny serwer znajdź.
Dziękuję działa - git
root@:~# iperf3 -c a204.speedtest.wobcom.de --bidir
Connecting to host a204.speedtest.wobcom.de, port 5201
[ 5] local 192.168.0.210 port 57962 connected to 62.176.247.4 port 5201
[ 7] local 192.168.0.210 port 57964 connected to 62.176.247.4 port 5201
[ ID][Role] Interval Transfer Bitrate Retr Cwnd
[ 5][TX-C] 0.00-1.00 sec 12.5 MBytes 105 Mbits/sec 0 1.15 MBytes
[ 7][RX-C] 0.00-1.00 sec 74.6 MBytes 626 Mbits/sec
[ 5][TX-C] 1.00-2.00 sec 10.0 MBytes 83.9 Mbits/sec 22 327 KBytes
[ 7][RX-C] 1.00-2.00 sec 90.2 MBytes 757 Mbits/sec
[ 5][TX-C] 2.00-3.00 sec 8.75 MBytes 73.4 Mbits/sec 0 361 KBytes
[ 7][RX-C] 2.00-3.00 sec 93.7 MBytes 786 Mbits/sec
[ 5][TX-C] 3.00-4.00 sec 10.0 MBytes 83.9 Mbits/sec 0 382 KBytes
[ 7][RX-C] 3.00-4.00 sec 100 MBytes 839 Mbits/sec
[ 5][TX-C] 4.00-5.00 sec 10.0 MBytes 83.9 Mbits/sec 0 392 KBytes
[ 7][RX-C] 4.00-5.00 sec 98.8 MBytes 828 Mbits/sec
[ 5][TX-C] 5.00-6.00 sec 10.0 MBytes 83.9 Mbits/sec 0 406 KBytes
[ 7][RX-C] 5.00-6.00 sec 102 MBytes 855 Mbits/sec
[ 5][TX-C] 6.00-7.00 sec 10.0 MBytes 83.9 Mbits/sec 0 424 KBytes
[ 7][RX-C] 6.00-7.00 sec 102 MBytes 858 Mbits/sec
[ 5][TX-C] 7.00-8.00 sec 8.75 MBytes 73.4 Mbits/sec 0 441 KBytes
[ 7][RX-C] 7.00-8.00 sec 97.3 MBytes 816 Mbits/sec
[ 5][TX-C] 8.00-9.00 sec 10.0 MBytes 83.9 Mbits/sec 0 458 KBytes
[ 7][RX-C] 8.00-9.00 sec 94.8 MBytes 795 Mbits/sec
[ 5][TX-C] 9.00-10.00 sec 10.0 MBytes 83.8 Mbits/sec 0 474 KBytes
[ 7][RX-C] 9.00-10.00 sec 99.5 MBytes 834 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID][Role] Interval Transfer Bitrate Retr
[ 5][TX-C] 0.00-10.00 sec 100 MBytes 83.9 Mbits/sec 22 sender
[ 5][TX-C] 0.00-10.03 sec 97.5 MBytes 81.6 Mbits/sec receiver
[ 7][RX-C] 0.00-10.00 sec 1015 MBytes 851 Mbits/sec 855 sender
[ 7][RX-C] 0.00-10.03 sec 953 MBytes 797 Mbits/sec receiver
iperf Done.
Pojedyńcze Retr są dopuszczalne? jak sobie testuje robiąc server na wr3000 v1 z openwrt oczywiscie i testujac laptopem z ax210 nieraz dostaje retr, gdzie telefon(choc zapiety na 433mhz a nie na 1200/1200 160mhz) nie lapie żadnych... Nie wpływa to na UX ale w logach widać, może mieć to związek że przypadkowo jedna antenka została troche uszkodzona w lapku?
Wyniki:
[adi@dell ~]$ iperf3 -c 192.168.2.1 -t 50
Connecting to host 192.168.2.1, port 5201
[ 5] local 192.168.2.215 port 51268 connected to 192.168.2.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 91.2 MBytes 765 Mbits/sec 0 976 KBytes
[ 5] 1.00-2.00 sec 82.9 MBytes 695 Mbits/sec 0 976 KBytes
[ 5] 2.00-3.00 sec 78.8 MBytes 661 Mbits/sec 0 976 KBytes
[ 5] 3.00-4.00 sec 104 MBytes 871 Mbits/sec 0 976 KBytes
[ 5] 4.00-5.00 sec 102 MBytes 859 Mbits/sec 0 976 KBytes
[ 5] 5.00-6.00 sec 100 MBytes 840 Mbits/sec 0 976 KBytes
[ 5] 6.00-7.00 sec 67.2 MBytes 564 Mbits/sec 0 976 KBytes
[ 5] 7.00-8.00 sec 94.6 MBytes 793 Mbits/sec 0 976 KBytes
[ 5] 8.00-9.00 sec 103 MBytes 866 Mbits/sec 0 976 KBytes
[ 5] 9.00-10.00 sec 104 MBytes 873 Mbits/sec 0 976 KBytes
[ 5] 10.00-11.00 sec 97.2 MBytes 816 Mbits/sec 0 976 KBytes
[ 5] 11.00-12.00 sec 73.0 MBytes 612 Mbits/sec 0 976 KBytes
[ 5] 12.00-13.00 sec 75.0 MBytes 629 Mbits/sec 0 976 KBytes
[ 5] 13.00-14.00 sec 77.9 MBytes 653 Mbits/sec 0 976 KBytes
[ 5] 14.00-15.00 sec 58.2 MBytes 489 Mbits/sec 2 976 KBytes
[ 5] 15.00-16.00 sec 58.9 MBytes 494 Mbits/sec 3 976 KBytes
[ 5] 16.00-17.00 sec 43.0 MBytes 361 Mbits/sec 2 976 KBytes
[ 5] 17.00-18.00 sec 61.6 MBytes 517 Mbits/sec 1 976 KBytes
[ 5] 18.00-19.00 sec 87.0 MBytes 730 Mbits/sec 2 976 KBytes
[ 5] 19.00-20.00 sec 96.1 MBytes 806 Mbits/sec 1 976 KBytes
[ 5] 20.00-21.00 sec 99.5 MBytes 835 Mbits/sec 0 976 KBytes
[ 5] 21.00-22.00 sec 69.8 MBytes 585 Mbits/sec 0 976 KBytes
[ 5] 22.00-23.00 sec 91.2 MBytes 766 Mbits/sec 0 976 KBytes
[ 5] 23.00-24.00 sec 101 MBytes 845 Mbits/sec 0 976 KBytes
[ 5] 24.00-25.00 sec 101 MBytes 845 Mbits/sec 0 976 KBytes
[ 5] 25.00-26.00 sec 96.1 MBytes 806 Mbits/sec 0 976 KBytes
[ 5] 26.00-27.00 sec 82.8 MBytes 694 Mbits/sec 0 976 KBytes
[ 5] 27.00-28.00 sec 86.4 MBytes 724 Mbits/sec 0 976 KBytes
[ 5] 28.00-29.00 sec 103 MBytes 866 Mbits/sec 0 976 KBytes
[ 5] 29.00-30.00 sec 104 MBytes 874 Mbits/sec 0 976 KBytes
[ 5] 30.00-31.00 sec 100 MBytes 839 Mbits/sec 0 976 KBytes
[ 5] 31.00-32.00 sec 73.0 MBytes 612 Mbits/sec 0 976 KBytes
[ 5] 32.00-33.00 sec 93.0 MBytes 780 Mbits/sec 0 976 KBytes
[ 5] 33.00-34.00 sec 104 MBytes 871 Mbits/sec 0 976 KBytes
[ 5] 34.00-35.00 sec 101 MBytes 847 Mbits/sec 0 976 KBytes
[ 5] 35.00-36.00 sec 100 MBytes 842 Mbits/sec 0 976 KBytes
[ 5] 36.00-37.00 sec 74.9 MBytes 628 Mbits/sec 0 976 KBytes
[ 5] 37.00-38.00 sec 93.2 MBytes 782 Mbits/sec 0 976 KBytes
[ 5] 38.00-39.00 sec 92.1 MBytes 773 Mbits/sec 0 976 KBytes
[ 5] 39.00-40.00 sec 99.8 MBytes 837 Mbits/sec 0 976 KBytes
[ 5] 40.00-41.00 sec 96.6 MBytes 811 Mbits/sec 0 976 KBytes
[ 5] 41.00-42.00 sec 76.4 MBytes 641 Mbits/sec 0 976 KBytes
[ 5] 42.00-43.00 sec 95.6 MBytes 802 Mbits/sec 0 976 KBytes
[ 5] 43.00-44.00 sec 102 MBytes 856 Mbits/sec 0 976 KBytes
[ 5] 44.00-45.00 sec 102 MBytes 856 Mbits/sec 0 976 KBytes
[ 5] 45.00-46.00 sec 97.0 MBytes 814 Mbits/sec 0 976 KBytes
[ 5] 46.00-47.00 sec 72.5 MBytes 608 Mbits/sec 0 976 KBytes
[ 5] 47.00-48.00 sec 99.0 MBytes 830 Mbits/sec 0 976 KBytes
[ 5] 48.00-49.00 sec 103 MBytes 863 Mbits/sec 0 976 KBytes
[ 5] 49.00-50.00 sec 103 MBytes 863 Mbits/sec 0 976 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-50.00 sec 4.37 GBytes 750 Mbits/sec 11 sender
[ 5] 0.00-50.01 sec 4.36 GBytes 750 Mbits/sec receiver
Coś na chwile zakłóciło transmisję po prostu.
Strony Poprzednia 1 2
Zaloguj się lub zarejestruj by napisać odpowiedź
eko.one.pl → Oprogramowanie / Software → Iperf - testy
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc